gaining data center cooling efficiency through airflow management
DESCRIPTION
This presentation highlights research from Upsite Technologies regarding the latest best in data center airflow management and cooling, including steps to improvement. Originally delivered by Upsite President John Thornell at the AFCOM Boston-New England Chapter meeting.TRANSCRIPT
Gaining Data Center Cooling Efficiency Through Airflow Management
John ThornellPresident, Upsite Technologies, Inc.
1
2
Agenda
• The State of Data Center Airflow Management (AFM)
• AFM Problems Are An Opportunity
• 4 Steps to Improve Cooling Efficiency
• Q&A
The State of Data Center AFM
2002 Uptime Institute Research
Bypass Airflow* 60%
Hot Spots 10%
Cooling Capacity 2.6x
2012 Upsite Technologies Research
Bypass Airflow* 48%
Hot Spots 20%
Cooling Capacity 3.9x
3
*More accurately, “Raised Floor Bypass Open Area” in today’s terminology.
Profile Data for 45 Sites:
Raised floor area
(sq ft)
# of running cooling units
Raised floor
bypass open
area (%)
Hot spots (%)
Cold spots (%)
(Data from 6 sites)
Proper perforated tile
placement (%)
Cooling Capacity Factor (CCF)
Averages 7,527 8 48% 20% 35% 77% 3.9Minimum 720 2 13% 0% 0% 7% 1.2Maximum 37,00
040 93% 86% 86% 100% 32.0
Recommended
n/a n/a <10% 0% 0% 100% 1.2
Conclusion: Inefficient cooling configuration / airflow management is the problem; capacity is not the problem.
The State of Data Center AFM
4
5
Why?
• Cooling capacity is difficult to quantify• It’s hard to justify initiatives, determine ROI• Mixed messages in the market,
vendor influence• No ‘one-size-fits-all’ solution• Power has been cheap• People paying the electric bill
detached from the data center• Organizations don’t have objectives clearly
stated that can be supported by cooling optimization
6
Why?
• Airflow Management – High awareness, low implementation.
• Open holes in the floor
• Blanking panels often missing
• Misplaced perforated tiles
• Gaps between racks
7
AFM Problems Are An Opportunity
• Money • OpEx Savings• CapEx Savings
• Capacity• Cooling Capacity• Room for IT Equipment
• IT Reliability
• Green Initiatives• CO2 Reduction
“…an average data center could reduce its operating expense by $32,000 annually, simply
by improving airflow management.” - Upsite CCF White Paper
4 Steps to Improve Cooling Efficiency
1. Determine Cooling Utilization2. Assess Current AFM Initiatives3. Implement Improvements, In The
Right Order4. Maintain With Organizational Best
Practices
8
Total rated cooling capacity (210 tons x 3.52) = 739 kW
110% of the IT critical load = 259 kW
CCF = 2.8 (739/259)
Running cooling capacity is 280% of the load
Step 1: Determine Cooling Utilization
The CCF (Cooling Capacity Factor)• A metric Upsite developed to determine the cooling effectiveness of a data center.
Measures the cooling output relative to the IT load, providing an accurate picture of cooling infrastructure efficiency.
What does it mean?• Calculating the CCF is the quickest and easiest way to determine cooling infrastructure
utilization and potential gains to be realized by AFM improvements.
The CCF is calculated by:• Convert the total rated (stated) cooling capacity to kW, divide by 110% of the IT critical
load (kW)
9
Step 1: Determine Cooling Utilization
10
CCF Rating Interpretation
1.0 to 1.1 There is little to no redundant cooling or room for reducing OpEx.
1.1 to 1.2 The number of running cooling units is very closely coupled to the heat load in the room.
1.2 to 1.5 There is moderate opportunity for savings from turning off cooling units. This can often only be done once AFM improvements have been effectively implemented.
1.5 to 3.0 Most common. These rooms have substantial opportunity to reduce operating cost, improve the IT environment, and increase the IT load that can be effectively cooled. Rooms in this range often have significant stranded cooling capacity that can be freed up by improving AFM.
> 3.0 Have great potential for improvement since the total rated cooling capacity of running units is at least three times 110% of the IT load.
Step 2: Assess AFM Initiatives
11
Raised Floor The Rack The Row
Step 3: Implement AFM Improvements
Row
Rack
Raised Floor
• Implement 4Rs in right order
• Adjust cooling infrastructure
• Measure intakes
• Measure CCF
• Repeat to achieve target CCF
Ensure Hot & Cold Aisle Separation
Control Intake Airflow
Seal the Openings
Optimal AFMRoom
1
2
3
4
12
Step 3: Implement AFM Improvements
RowEnsure Hot & Cold Aisle Separation
RackControl Intake
Airflow
Raised FloorSeal the Openings
Optimal AFMRoom
1
2
3
4
13
Contained cold aisle with hot spots – the result of
overlooking AFM fundamentals at the raised
floor and rack levels.
14
Step 4: Maintain With Organizational Best Practices
• Ensure IT and Facilities are coordinated• Document processes for personnel
working the room• IT has responsibility down to the
raised floor• Implement training protocols• Clearly state company objectives that
cooling optimization can support• Schedule regular assessments• Limit access to computer room• Centralize decision-making process for changes• Regular reporting to senior management (e.g. PUE, CCF, utility
bill, other related trends to track)• Appoint a ‘cooling czar’ and give them authority
Useful Information
• Online CCF Calculator – http://upsite.com/cooling-capacity-factor
-calculator
• CCF White Paper– http://upsite.com/cooling-capacity-factor
-white-paper
• Bypass Airflow White Paper– http://upsite.com/bypass-airflow-white-p
aper
15
Questions?
John ThornellPresident, Upsite [email protected]
Follow us for the latest news and information on data center AFM.
@UpsiteTech blog.upsite.com
On LinkedIn
16