fy bsc usch-102 semester i paper ii stereochemistry -i
TRANSCRIPT
FY BSC (USCH-102)Revised syllabus of University of Mumbai (2016-17)
Semester I paper IIStereochemistry-I
Dr. Anita S. Goswami-Giri
VPMs B N Bandodkar College of Science Thane.
Stereochemistry 1
DEFINITIONS1) Stereoisomers - Compounds that have the same molecular formula and the same connectivity, but different
arrangement of the atoms in 3-dimensional space. Stereoisomers cannot be converted into each other
without breaking bonds.
2) Enantiomers - Nonsuperposable mirror images, or chiral molecules which are mirror images.
3) Diastereomers - Stereoisomers which are not enantiomers (or not mirror images) ; different compounds
with different physical properties
4) Chiral, or asymmetric carbon - A tetrahedral carbon (sp3 carbon) atom bearing four different substituents.
5) Chirality centers, or stereocenters - Asymmetrically substituted atoms in a molecular structure.
The most common type encountered in this course will be the chiral carbon described above.
6) Meso compounds, or meso forms - Symmetric, or achiral molecules that contain stereocenters. Meso
compounds and their mirror images are not stereoisomers, since they are identical.
Stereochemistry 2
7) Optical activity - The ability of chiral substances to rotate the plane of polarized light by a specific angle.
Or (achiral compound will not rotate light)
a. Dextrorotatory - Ability of chiral substances to rotate the plane of polarized light to the right.
b. Levorotatory - Ability of chiral substances to rotate the plane of polarized light to the left.
c. Specific rotation - The measured angle of rotation of polarized light by a pure chiral sample under
specified standard conditions.
8) Racemic mixture, racemic modification, or racemate - A mixture consisting of equal amounts of
enantiomers. A racemic mixture exhibits no optical activity because the activities of the individual
enantiomers are equal and opposite in value, thereby cancelling each other out.
9) Optical purity - The difference in percent between two enantiomers present in a mixture in unequal amounts.
For example, if a mixture contains 75% of one enantiomer and 25% of the other, the optical purity is 75-25 =
50%.
a. Absolute configuration - A description of the precise 3-dimensional topography of the molecule.
b. Relative configuration - A description of the 3-dimensional topography of the molecule relative to anarbitrary standard. Absolute and relative configurations may or may not coincide.
Stereochemistry 3
The Flying-Wedge projection/ wedge-dot formula)
• The Flying-Wedge projection is themost common three-dimensionalrepresentation of a three dimensionalmolecule on a two dimensional surface(paper). This kind of representation isusually done for molecules containingchiral centre/asymmetric Carbon atom.
• In this representation, the ordinarylines represent bonds in the plane ofthe paper. A solid Wedge ( ) representsa bond above the plane of the paperand a dashed wedge ( ) or a brokenline ( ) represents a bond below theplane of the paper.
Stereochemistry 4
Projection formula It is useful for compounds with 2 or more streogenic/asymmetric centres and Fischer
projection developed 2-dimentional plane projection formulae for 3-dimentional
molecule.
3.Sawhorse formula
2.Newman Projection
1.Fischer Projection
3D Image
Flying-wedge formula
Stereochemistry 5
• It is obtained by projecting the molecule so that Central C-C bond is parallel to the plane of the paper.
• Flat representation of a 3-D molecule.
• A chiral carbon is at the intersection of horizontal and vertical lines.
• Horizontal lines are forward, out of plane.
• More oxidized group is placed at the top of vertical line
• Vertical lines are behind the plane.
• Carbon chain is on the vertical line.
• Highest oxidized carbon is at top.
• Rotation of 180 or 360 in the plane remain unaffected or doesn’t change molecule.
• Rotation of 90 or 270 changes the configuration.
• Any two group interchanges twice
• Three groups rotated at a time clockwise or anticlockwise by keeping 4th group constant.
• Fischer projection formula is restricted only eclipsed form
1.Fischer Projection
Stereochemistry 6
Stereochemistry 7
Fischer Projections
Stereochemistry 8
180° Rotation
• A rotation of 180° is allowed because it will not change the configuration.
Stereochemistry 9
90° Rotation
• A 90° rotation will change the orientation of the horizontal and vertical groups.
• Do not rotate a Fischer projection 90°.
Stereochemistry 10
Glyceraldehyde• The arrow from group 1 to group 2 to group 3 appears counterclockwise
in the Fischer projection. If the molecule is turned over so the hydrogen is in back, the arrow is clockwise, so this is the (R) enantiomer of glyceraldehyde.
Stereochemistry 11
When naming (R) and (S) from
Fischer projections with the
hydrogen on a horizontal bond
(toward you instead of away
from you), just apply the normal
rules backward.
Stereochemistry 12
Fischer Mirror Images
• Fisher projections are easy to draw and make it easier to find enantiomers and internal mirror planes when the molecule has two or more chiral centers.
CH3
H Cl
Cl H
CH3
Fischer (R) and (S)• Lowest priority (usually H) comes forward, so assignment rules are backward!
• Clockwise 1-2-3 is (S) and counterclockwise 1-2-3 is (R).
• Example:
(S)
(S)
CH3
H Cl
Cl H
CH3
Stereochemistry 13
Summary—Types of isomers
Stereochemistry
Stereochemistry 14
. A Newman projection, useful in alkane stereochemistry, visualizes the conformation of a chemical bond from
front to back, with the front atom represented by a dot and the back carbon as a circle.
Formula can be obtained by projecting the molecule such that the central C-C bond perpendicular to the plane
of paper.
Newman projection –only 2 or more carbon atoms
depict the ‘front’ atom as a dot from which 3 bond radiate, and the ‘back’ or rare carbon atom represented as a
larger circle and 3 bonds radiate from its circumference. The central C-C bond is not visible
The C-C bond in this way, the angle formed between a C-H bond on the front carbon and a C-H bond on the
back carbon is referred to as a dihedral angle
The lowest energy conformation of ethane
all of the dihedral angles are 60o, and the distance
between the front and back C-H bonds is maximized.If we now rotate the front CH3 group 60° clockwise, the
molecule is in the highest energy and the dihedral angles are all 0o
Stereochemistry 15
The energy of the eclipsed conformation, where the
electrons in the front and back C-H bonds are closer
together, is approximately 12 kJ/mol higher than that of
the staggered conformation.
Another 60° rotation returns the molecule to a second
staggered conformation. This process can be continued
all around the 360° circle, with three possible eclipsed
conformations and three staggered conformations, in
addition to an infinite number of conformations in
between these two extremes.
Newman projection
Stereochemistry 16
Stereochemistry 17
Stereochemistry 18
Stereochemistry 19
Fischer projection formula into sawhorse formula :horizontal bonds are above the plane and terminal vertical bonds are below the plane. The center C-C written in slanting manner .The Fischer projection formula is represents only in eclipsed form
Stereochemistry 20
ii)Sawhorse- eclipsed and staggered Sawhorse projection into Newman projection formula :- First circle is drawnwhich represents the carbon atom at the backside and the centre of the circle representsthe front carbon atom. Therefore the bonds attached to the front carbon atoms are joinedto the center of the circle whereas the bonds attached to the backside carbon atom arejoined only to the circumference of the circle.
Stereochemistry 21
.
Three stereoisomers of 2,3-dichlorobutane
The structure of 2,3-dichlorobutane is CH3*CHCl*CHClCH3
The two carbon atoms marked with blue asterisks are chiral centers.
The maximum number of stereoisomers is 2n, where n is the number of chiral
centers.
Since n=2, the maximum number of stereoisomers is 22=4.
Stereoisomers of 2,3-dichlorobutane
Structures 1 and 2 are two different
nonsuperimposable mirror images of each other.
But Structures 3 and 4 are meso compounds.
They are superimposable on each other, so they are
the same compound.
So, there are only three stereoisomers of 2,3-
dichlorobutane.
Stereochemistry 22
Stereochemistry of Carbon compound containing two similar asymmetric carbon atoms
• If 3 groups on asymmetric carbon atoms are same then they are similar asymmetric carbon atoms e.gHOOC-*CH(OH)*CH(OH)COOH 2n n= 2
Stereochemistry 23
Characteristic of meso compounds
• Due to internal compensation meso isomers are optically inactive
• It possesses a plane of symmetry
• It is one which is superimposable on its mirror image
• All diasteroisomers are called meso forms
• The physical properties of the meso forms are different than d &l forms e.g Tartaric acid
Stereochemistry 24
(+)-tartaric acid: [α]D = +13º m.p. 172 ºC
(–)-tartaric acid: [α]D = –13º m.p. 172 ºC
meso-tartaric
acid:[α]D = 0º m.p. 140 ºC
Configuration and relative • e.g Tartaric acid - Two of these stereoisomers are enantiomers and the third is an
achiral diastereomer, called a meso compound. Meso compounds are achiral (optically inactive) diastereomers of chiral stereoisomers.
Stereochemistry 25
1. Chemical reaction without displacement at thechiral centre concerned
2. Chemical reaction without displacement3. X-ray analysis4. Asymmetric inductive correlation5. Optical rotation (a) monochromatic rotation (b)
Rotatory dispersion6. The study of quasi-racemic compound7. Enzyme studies.8. A Reaction does not involve the breaking of bond
to a chiral proceeds with retention ofconfiguration about that chiral centre.
Oxidation of (+)-glyceraldehyde (1) with HgO gives(−)- glyceric acid(2), a reaction that does not alter the stereocenter.Thus the absolute configuration of (−)-glyceric acidmust be the same as that of (+)-glyceraldehyde. HNO2 oxidation of (+)- isoserine(3) gives (–)-glyceric acid, establishing that (+)-isoserine also has the same absolute configuration.(+)-Isoserine can be converted by a 2-stage processof bromination and ZN reduction to give (–)-lacticacid, therefore (–)-lactic acid also has the sameabsolute configuration. If a reaction gave theenantiomer of a known configuration, as indicatedby the opposite sign of optical rotation, it wouldindicate that the absolute configuration is inverted.
Stereochemistry 26
Absolute configuration
If, in the Fischer projection, like ligands are on the same side of the bond linking the chiral centers, the
compound is identified as the erythro isomer; if they are on the opposite sides, the compound is identified as
the threo isomer.
Stereochemistry 27
Two older prefixes still commonly used to distinguish diastereomers are threo and erythro. In the case of saccharides, when drawn in the Fischer projection the erythro isomer has two identical substituents on the same side and the threo isomer has them on opposite sides.
Erythro isomer and threo isomer nomenclature
Stereochemistry 28
Stereochemistry 29
(+)- and (−)- or d- and l- nomenclature
An enantiomer can be named by the direction in which it rotates the plane of polarized light. If it rotates the light
clockwise that enantiomer is labeled (+). Its mirror-image is labeled (−). The (+) and (−) isomers have also been termed d- and l-. (dextrorotatory and levorotatory)
d-glyceraldehyde
(R)-glyceraldehyde
(+)-glyceraldehyde
l-glyceraldehyde
(S)-glyceraldehyde
(−)-glyceraldehyde
Projection Formulae Inter-conversion
Fischer Projection Newman Projection
Fischer projection refers to eclipsed conformation
Stereochemistry 30
Stereoisomerism
• The dimension of a molecule can be interpreted topologically, based on the connections of the consisting atoms, or spatially, based on the Cartesian coordinates of them. In this section the notion of dimension is used in spatial sense.
• Molecules with same connectivity but different spatial arrangement are called stereoisomers.
Stereochemistry 31
Stereochemistry 32
33
Determining the relationship between two nonidentical molecules
Stereochemistry
Stereochemistry
Geometric isomerism
• Geometric isomerism (also known as cis-transisomerism or E-Z isomerism) is a form of stereoisomerism.
• Geometric isomers have the same structural formulas but differ inthe arrangement of groups at a single atom, at double bonds, or inrings and it is because of molecular symmetry. These compound donot rotate the plane polarised light.
• Unsaturated compound and cyclic compounds exhibit geometricalisomerism.
Stereochemistry 34
Cis isomers -Similar gr on same side
Trans isomers- Similar gr on opposite side
Stereochemistry 35
Stereochemistry 36
Stereochemistry 37
38
• The chemical and physical properties of two enantiomers are identical except
in their interaction with chiral substances.
• The physical property that differs is the behavior when subjected to plane-
polarized light ( this physical property is often called an optical property).
• Plane-polarized (polarized) light is light that has an electric vector that
oscillates in a single plane.
• Plane-polarized light arises from passing ordinary light through a polarizer.
• Originally a natural polarizer, calcite or iceland spar, was used. Today,
polarimeters use a polarized lens similar to that used in some sunglasses.
• A polarizer has a very uniform arrangement of molecules such that only
those light rays of white light (which is diffuse) that are in the same plane as
the polarizer molecules are able to pass through.
• A polarimeter is an instrument that allows polarized light to travel through a
sample tube containing an organic compound and permits measurement of
the degree to which the light is rotated.Stereochemistry
Optical Activity
• With achiral compounds, the light that exits the sample tube remains
unchanged. A compound that does not change the plane of polarized light
is said to be optically inactive.
Optical Activity
Stereochemistry 39
40
• With chiral compounds, the plane of the polarized light is rotated through an
angle . The angle is measured in degrees (°), and is called the observed
rotation. A compound that rotates polarized light is said to be optically active.
Stereochemistry
Optical Activity
41
• The rotation of polarized light can be clockwise or counterclockwise.
• If the rotation is clockwise (to the right of the noon position), the
compound is called dextrorotatory. The rotation is labeled d or (+).
• If the rotation is counterclockwise, (to the left of noon), the compound is
called levorotatory. The rotation is labeled l or (-).
• Two enantiomers rotate plane-polarized light to an equal extent but in
opposite directions. Thus, if enantiomer A rotates polarized light +5°, the
same concentration of enantiomer B rotates it –5°.
• No relationship exists between R and S prefixes and the (+) and (-)
designations that indicate optical rotation.
Optical Activity
Stereochemistry
Optical Families
42
D-(+)-glyceraldehyde L-(-)-glyceraldehyde
CHO
OHH
CH2OH
CHO
HO H
CH2OH
* *
CHO CHO
(CHOH)n
OHH
CH2OH
*
(CHOH)n
HO H
CH2OH
D-sugars L-sugars
CO2H
NH2H
R
CO2H
H2N H
R
D-amino acids L-amino acids
Stereochemistry
Distinguish between geometrical isomerism and optical isomerism
• Geometrical
• C=C bonds have restricted rotation so the groups
on either end of the bond are ‘frozen’ in one
position; it isn’t easy to flip between the two.
• This produces two possibilities. The two structures
cannot interchange easily so the atoms in the two
molecules occupy different positions in space.
• Geometric isomers have the same structural
formulas but differ in the spatial arrangement of
groups at a single atom, at double bonds, or in rings
• It is having two forms cis and trans and E
(entagegen)/Z Zussamen
• Optical
• occurs when compounds have non-superimposable mirror images Isomers thetwo different forms are known as opticalisomers or enantiomers.
• Optical isomers have the same structuralformulas but differ in the configuration &because of their molecular asymmetry thesecompound rotate the plane of planepolarised light.
• Light appears in D (dextrorotatory) /L(laevorotatory )
Stereochemistry 43
44
• An equal amount of two enantiomers is called a racemic mixture or a racemate.
A racemic mixture is optically inactive. Because two enantiomers rotate plane-
polarized light to an equal extent but in opposite directions, the rotations cancel,
and no rotation is observed.
Racemic Mixtures
Stereochemistry
45
• Specific rotation is a standardized physical constant for the amount that a
chiral compound rotates plane-polarized light. Specific rotation is denoted by
the symbol [] and defined using a specific sample tube length (l, in dm),
concentration (c in g/mL), temperature (250C) and wavelength (589 nm).
Racemic Mixtures
Stereochemistry
46
• Enantiomeric excess (ee) is a measurement of the
excess of one enantiomer over the racemic mixture.
Enantiomeric excess and Optical purity: ee and op
ee = % of one enantiomer - % of the other enantiomer.
• Consider the following example: If a mixture contains 75% of one
enantiomer and 25% of the other, the enantiomeric excess is 75% - 25% =
50%. Thus, there is a 50% excess of one enantiomer over the racemic
mixture.
• ee is numerically equal to Optical Purity.
• The optical purity can be calculated if the specific rotation [] of a mixture
and the specific rotation [] of a pure enantiomer are known.
op = ([] mixture/[] pure enantiomer) x 100.Stereochemistry
47
• Since enantiomers have identical physical properties, they cannot be separated by
common physical techniques like distillation.
• Diastereomers and constitutional isomers have different physical properties, and
therefore can be separated by common physical techniques.
Physical Properties of Stereoisomers: e.g Tartaric acid
The physical
properties of the three
stereoisomers of tartaric
acid.
Stereochemistry
48
• Two enantiomers have exactly the same chemical properties except for their
reaction with chiral non-racemic reagents.
• Many drugs are chiral and often must react with a chiral receptor or chiral enzyme
to be effective. One enantiomer of a drug may effectively treat a disease whereas
its mirror image may be ineffective or toxic.
Chemical Properties of Enantiomers:
Stereochemistry
Chirality or Dissymmetry • Chirality is a geometric property of some molecules and ions or object
in the universe. A chiral molecule/ion is non-superposable on its mirror image. The presence of an asymmetric carbon center is one of several structural features that induce chirality in organic and inorganic molecules.
(S)-(+)-lactic acid (left) and (R)-(–)-lactic acid (right) are
nonsuperimposable mirror images of each other
Stereochemistry 49
FISCHER PROJECTION OF MESO-TARTARIC ACID
A meso compound or meso isomer is a stereoisomer with an identical or superposable mirror
image
Most compounds that contain one or more asymmetric carbon atoms show enantiomerism, but this is not
always true. There are a few known compounds that do have asymmetric carbon atoms, but, being non-
dissymmetric with respect to the whole molecule, do not show enantiomerism. Thus, meso tartaric acid has
two asymmetric carbon atoms, but samples still exhibit optical inactivity because each of the two halves of the
molecule is equal and opposite to the other and thus is superposable on its geometric mirror.
d-(-)-Tartaric Acid is an isomer that makes up Racemic acid. It
is also called levotartaric acid, with levotartaric (-) coming from
the word levorotatory, meaning that the substance rotates the
plane of polarized light counterclockwise, or to the left
l-(+)-Tartaric Acid (dextrotartaric acid) is the other
isomer that makes up Racemic acid. Part of its name,
dextrotartaric comes from the word dextrorotatory (+),
meaning that it rotates the plane of polarized light
clockwise, or to the right
(+)and (-)Tartaric Acid optically active
Meso Tartaric acid Optically inactive
Stereochemistry 50
Stereochemistry of Carbon compound with one asymmetric atom
• An asymmetric carbon atom (chiral carbon) is a carbon atom that is attached to four different types of atoms or groups of atoms.
• If n is the number of asymmetric carbon atoms then the maximum number of isomers = 2n
Stereochemistry 51
ENANTIOMERS AND DIASTEREOMERS
Rotating structure ( b) 180° in the plane of the paper, the only allowable rotation, does notlead to a form that is superimposable on structure ( a). Rotations of less than or more than180° are not allowed because in a two‐dimensional projection, it is impossible to see thedifference in the position of atoms that are located in front of or behind the plane.
A Fischer projection is the most useful projection for discovering enantiomers. Compare the 2‐chlorobutane enantiomer
Stereochemistry 52
Optical Families
D-(+)-glyceraldehyde L-(-)-glyceraldehyde
CHO
53
OHH
CH2OH
CHO
HO H
CH2OH
* *
(CHOH)n
OHH
CH2OH
*
CHO
(CHOH)n
HO H
CH2OH
CHO
CO2H
NH2H
R
CO2H
H2N H
R
D-sugars L-sugars
D-amino acids L-amino acids
Stereochemistry
Distinction between enantiomers and diastereomersEnantiomers• Enantiomers are optical isomers that are non-
superimposable mirror images of each other.
• Organic compounds containing a chiral carbonthat have the same structural as well aschemical formula but are non-superimposableon each other and are mirror images of eachother, are nothing but enantiomers.
• One chiral C atom can have enantiomers
• ll the stereocenters (chiral carbons) of onestereoisomer differs in orientation from thestereocenters of the other stereoisomer.
• 2-bromo-3-chloro-butane
Diastereoisomers• Diastereomers are stereoisomers that are non-
superimposable, non-mirror images of each other.
• Organic compounds with two or more chiral carbonthat have the same structural and molecularformula; these compounds are, however, non-superimposable and non-mirror images of eachother.
• At least 2 Chiral carbon atoms to showdiastereomers.
• only some stereocenters (chiral carbons) of onestereoisomer differs in orientation from thestereocenters of the other stereoisomer
Stereochemistry 54
Enantiomers
• Enantiomers of a compound have thesame physical properties except opticalactivity, but differ in chemical properties.
• A compound with one or morestereocenters (chiral carbons) is capableof enantiomerism (property to formenantiomers).
• All enantiomers show optical activity.When they rotate light in the clockwisedirection, they are known as dextrorotary,(+) or d, and when they rotate light in theanticlockwise direction, they are knownas levorotary, (-) or l. When a compoundcontains equal number of d and lmolecules, they render the compoundoptically inactive and are called a race
mixture.
Diastereoisomers
• Diastereomers of a compound differ intheir physical as well as chemicalproperties.
• A compound needs at least twostereocenters (chiral carbons) in order toform diastereomers.
• Not all diastereomers are optically active.Some stereoisomers are said to be mesocompounds and seem to be opticallyinactive despite having two or more chiralcarbons. The compounds possess a line ofsymmetry, meaning, one half of thecompound is identical to the other half,but these two halves differ in theirorientation (if one half has S configurationthen the other half has R configuration).
Stereochemistry 55
2E-2,3-dichlorobut-2-ene 2Z-2,3-dichlorobut-2-ene
E/Z notation
The cis/trans system for naming isomers is not effective if more than two different
substituents are attached to the double bond. In this case, following the Cahn-Ingold-
Prelog priority rules a priority is assigned to each substituent on a double bond. If the
two groups of higher priority are on opposite sides of the double bond
(trans arrangement), then the E configuration is assigned to the bond. If the two groups
of higher priority are on the same side of the double bond (cis arrangement), than
the Z configuration is assigned to it.
Stereochemistry 56
Conversion rule
Stereochemistry 57
Conversion rule – e.g 1,2-dichloro propane with single stereogenic centre at C2
Stereochemistry 58
(R) and (S) notation for Fischer formulae.g D(-)2-Amino propionic acid
Stereochemistry 59
(R) and (S) notation for Fischer formula
Stereochemistry 60
Sequence at C2: OH, COOH, Y, H
Molecule with two chiral centres :
When molecule contain two chiral centers , each chiral center is consider separately. By using r/s notation assigned
each centre e.g Tartaric acid chiral centers are C2 and C3
Stereochemistry 61
Stereochemistry 62
Cahn-Ingold-Prelog priority rules• Since enantiomers are different configurations of the same compound, a notational system had
to be developed that would indicate the 3‐dimensional arrangement of atoms at specific
stereogenic centers. Such a system was devised by the chemists Cahn, Ingold, and Prelog. In
this system, the substituents of a stereogenic center are ranked by atomic weight as dictated by
a series of priority rules.
• A projection of the molecule is then viewed so that the group or atom of lowest priority is
eclipsed by the stereogenic center. The ranking of the three remaining groups is then
determined.
• If their rank from highest to lowest is in a clockwise direction, the configuration is R.
• if the rank declines in a counterclockwise direction, the configuration is S.
• The labels R and S come from the Latin words rectus, which means “right,” and sinister,
meaning “left.” The right and left designations refer only to the order of atoms or groups about
a stereogenic center. They do not refer to the direction in which plane‐polarized light is rotated
by the molecule.Stereochemistry 63
Sequence rules
1. Identify the four different atoms or groups attached to the stereogenic center.
2. The two possible spatial arrangements are called configurations.
3. Rank the atoms or groups based on the priority rules (see the list following this
one).
4. Orient a projection of the molecule in space so that the group or atom of lowest
rank is eclipsed by the stereogenic center.
5. Determine the ranking of the remaining visible atoms or groups.
6. Each asymmetric carbon atom is assigned a letter (R) or (S) based on its three-
dimensional configuration.
7. If the ranking declines in a clockwise direction, the configuration is R; if the
ranking declines in a counterclockwise direction, the configuration is S.
Stereochemistry 64
Assign a relative “priority” to each group bonded to the asymmetric carbon. Group 1 would have the highest priority, group 2 second, etc.Atoms with higher atomic numbers receive higher priorities.
I > Br > Cl > S > F > O > N > 13C > 12C > 2H > 1H
Stereochemistry 65
Sequence rules
3. If a group contains multiple bonds, the doubly or triply bonded atoms are counted as two or three of
those atoms, respectively. Thus the carbonyl group
is considered to have two carbon‐oxygen bonds, one actual and one theoretical
A cyano group
is considered to have three carbon‐nitrogen bonds, one actual and two
theoretical. For comparison purposes, an actual bond ranks higher than a
theoretical bond of the same type. For example, when ranking the cyano group
against
The priority rules rank atoms and groups based on atomic mass
1. For the four atoms directly attached to the stereogenic center, the higher the atomic mass, the higher
the rank.
2. If two or more atoms directly attached to the stereogenic center have the same mass, work outward
along the chains of the groups they are in, atom by atom, until a point of difference is reached. The rank
is assigned at this point of difference, based on the difference in atomic mass.
O C
(O)
O (C)
C C
(C)
C (C)
Stereochemistry 66
Sequence rules
Assign Priorities-1. Ligands of higher atomic number get higherpriority than ligands of lower atomic numbers
Atomic number: F > N > C > H
C
Cl
H
FBr H
1 Br
2Cl
F 3
C
Cl
H
BrF H
Br1
2Cl
3F
= =
1-2-3: clockwise :R counterclockwise : S
One interchange!
C
CH2CH3
H
CH2OHH3CH
CH2OH
1
2CH2CH3
H3C
3
=
2. In case of equal finish, use
the next atom along the chain
and use rule no. 1
counterclockwise : SStereochemistry 67
Sequence rules
Stereochemistry 68
Sequence rules
Stereochemistry 69
Sequence rules
Stereochemistry 70
Sequence rules
(R) and (S) Configuration: Breaking Ties
In case of ties, use the next atoms along the chain of each group as tiebreakers.
71Stereochemistry
(R) and (S) Configuration: Rule 4 - Multiple Bonds
Treat double and triple bonds as if each were a bond to a separate atom.
Stereochemistry 72
Stereochemistry 73
(R) and (S) Configuration: Step 2
• Working in 3-D, rotate the molecule so that the lowest priority group is in back.
• Draw an arrow from highest (1) to second highest (2) to lowest (3) priority group.
• Clockwise = (R), Counterclockwise = (S)
74Stereochemistry
Assign Priorities
Draw an arrow from Group 1 to Group 2 to Group 3 and
back to Group 1. Ignore Group 4.
Clockwise = (R) and Counterclockwise = (S)
Counterclockwise
(S)
75Stereochemistry
Example
C
OH
CH3CH2CH2
H
CH2CH3
1
23
4
C
CH2CH3
CH3CH2CH2
OH
H
1
2
3
4
rotate
When rotating to put the lowest priority group in the back,
keep one group in place and rotate the other three.
Clockwise
(R)
76Stereochemistry
Example (Continued)
CH3
CH3CH2CH=CH
CH2CH2CH2CH3
H1
2
3
4
Counterclockwise
(S)
77Stereochemistry
Conformational Analysis
• Arrangement in space of atoms of a molecule which can arise by rotation about a single bond and is capable of definite existence. It is obtained b single bond are called as conformations or conformer or rotational isomers.
Stereochemistry 78
Conformational Analysis Ethane-Staggered is more stable because all H atoms of carbon atoms are directly opposite to or eclipsed by vicinal H atoms on the carbon atoms The conformation known as eclipsed form. H atoms Distance is closed hence having higher energy than staggered. If rotate front C at 300 both conformations obtained thrice. Free rotation at 60 , 180 ,300 maxima and 120 , 240 ,360 is minima and all forms are having same energy.
Stereochemistry 79
• Butane (CH3CH2CH2CH3) has four tetrahedral carbons and three carbon-carbonbonds connecting them together. Staggered is most stable conformation-clockwise and anticlockwise rotation gives eclipsed due to repulsive interactionbetween eclipsed H atom and ethyl gr. At 360 both confirmation produced inthrice.
a) Two Confirmation of n-butane rotation at C1-C2
Staggered
Stereochemistry 80
b) Six Confirmation of n-butane rotation at C2-C3
with its four-carbon chain. There are now three rotating carbon-carbon single bonds to consider, but we will focus on the middle bond between C2 and C3. above are two representations of butane in a conformation which puts the two CH3 groups (C1 and C4) in the eclipsed position, with the two C-C bonds at a 0o dihedral angle.
Stereochemistry 81
• If we rotate the front, (blue) carbon by 60° clockwise, the butane molecule is now in a staggered conformation.
Stereochemistry 82
• This is more specifically referred to as the gauche conformation ofbutane. Notice that although they are staggered, the two methyl groupsare not as far apart as they could possibly be.
• A further rotation of 60° gives us a second eclipsed conformation (B) inwhich both methyl groups are lined up with hydrogen atoms.
Stereochemistry 83
• One more 60 rotation produces anotherstaggered conformation called the antiplanarconformation, where the two methyl groupsare positioned opposite each other (adihedral angle of 180o).
Because the anti conformation is lowest in
energy (and also simply for ease of
drawing), it is conventional to draw open-
chain alkanes in a 'zigzag' form, which
implies anti conformation at all carbon-
carbon bonds
Stereochemistry 84
Relative energies for the various eclipsed, staggered, and gauche conformations.
Stereochemistry 85
Sumup for C2-C3
Stereochemistry 86