Four-wheel Electric Counterbalanced Lift TrucksE3.50–5.50XL

3 500 – 5 500 kg

E3.50XL, E4.00XL, E4.50XLS, E4.50XL, E5.50XL

Equipment and weight:Weights (line 2.1) are based on the following specifications:Complete E3.50-4.00XL truck with 3 100 mm Vista 2-stage limited free lift mast, E4.50-5.50XL truck with 2 850 mm Vista 2-stage limited free lift mast, 1 070 mm hook type carriage with load backrest and 1 200 mm forks. 48 volt electrical components and overhead guard.

Specification data is based on VDI 2198

Forks:E3.50/E4.00XL: 50 x 130 x 1 000 to 1 800 mm longE4.50XLS/E4.00XL/E5.50XL: 60 x 150 x 1 200 to 2 400 mm long

Fork spacing:Fork carriage width: 1 070 mm 1 220 mmInside to inside, minimum: 30 mm 20 mmOutside to outside, maximum: 900 mm 1 130 mm

Load centre (mm)

Rat

ed lo

ad (k

g)

E5.50XLE4.50XL/E4.50XLSE4.00XLE3.50XL

Load centre

Distance from front of forks to centre of

gravity of load.

Rated load

Based on vertical masts up to

4 600 mm to top of forks.

= Centre of gravity of unladen truck

a = Minimum operating clearance

(V.D.I. standard = 200 mm BITA recommendation = 300 mm)

l6 = Load length

*Standard tread shown-see line 3.6 for optional tread

NOTE:Specifications are affected by the conditionof the vehicle and how it is equipped, as wellas the nature and condition of the operatingarea. If these specifications are critical, theproposed application should be discussedwith your dealer.

¶ Bottom of forks

◗ Without load backrest

h6 subject to +/- 5 mm tolerance

FLS 1500 full-suspension seat

Add 30 mm with load backrest

Stacking aisle width (lines 4.33 & 4.34) is based on the V.D.I. standardcalculation as shown on illustration.The British Industrial Truck associationrecommends the addition of 100 mmto the total clearance (dimension) forextra operating margin at the rear ofthe truck.

† Gradeability figures (lines 5.7 & 5.8) areprovided for comparison of tractiveperformance, but are not intended toendorse the operation of the vehicle onthe stated inclines. Follow instructionsin the operating manual regardingoperation on inclines.

Extended shift on

Variable

Tables key:

Add 501 mm with load backrestextension

Add 452 mm with load backrestextension

� Deduct 452 mm with load backrestextension

Add 375 mm with load backrestextension

Add 326 mm with load backrestextension

Add 321 mm with load backrestextension

Deduct 326 mm with load backrestextension

Deduct 321 mm with load backrestextension

Wide tread required

Notice

Care must be exercised when handling

elevated loads. When the carriage

and/or load is elevated, truck stability

is reduced. It is important that mast tilt

in either direction be kept to a

minimum when loads are elevated.

Operators must be trained and adhere

to the instructions contained in the

Operating Manual.

Safety:

This truck conforms to the current EU requirements.

Hyster products are subject to change without notice.

Lift trucks illustrated may feature optional equipment.

Mast and Capacity Information

The rated capacities shown are for masts in a vertical position on trucks equipped with standard or sideshift carriage and nominal length forks. Masts above themaximum fork heights shown in the mast table are classified as high lift and, depending on the tyre/tread configuration may require reduced capacity, restricted back tiltor wide tread.

Values shown are for standard equipment. When using non-standard equipment these values may change. Please contact your Hyster dealer for information.

Product Features

Application matched performance and battery shift life

■ Hyster ACX system offers extended shift life or extra AC performance options to suit each application.

■ AC technology on both traction and hydraulics for reliable, positive performance.

■ Brushless DC steering motor.

■ Compact dimensions and extraordinary manoeuvrability offer tight aisle widths.

■ Available with cushion or pneumatic shaped solid tyres.

■ Available with 48V or 80V battery configuration.

Advanced ergonomic features to inspire productivity

■ Hydraulic control/seat choices

Standard fully adjustable semi-suspension seat with integral armrest. With low effort, soft touch, manualhydraulic levers.

Optional e-hydraulic seat with TouchPoint™ mini-levers provide ultimate fingertip precision control.

Optional e-hydraulic seat with TouchControl™ joystick. Especially suited to intensive applications where hydraulic operation is frequent and accurate/delicate hydraulic control is required.

■ Convenient step and handgrip for ease of access

■ Demand Sense Steering

■ Monotrol® pedal (optional)

■ Clear view dash display with LCD indicators

■ 4 pre-programmed performance modes

Pin codes (optional) can be allocated to individual drivers allowing them access only to the performancelevel suited to their ability and experience.

■ Battery discharge indicator with lift interrupt

■ Full range of Vista masts. 2 stage limited free lift, 2 or 3 stage full free lift with

hydraulic mast cushioning for dependable handling of fragile loads.

Offering excellent visibility with smooth, low noise operation.

Dependability and low cost of operation

■ Extended battery shift life

■ 1 000 hour service intervals on most major components*

■ 100% brushless AC motors

■ Auto regenerative braking

■ On board diagnostics for early warning of maintenance requirements

■ One piece frame, designed using FEA** technology, and robust steer axle design for proven durability

* Subject to applications survey

**Finite Element Analysis

Hyster Europe, Flagship House, Reading Road North, Fleet, Hants GU51 4WD, England.

Tel: +44 (0) 1252 810261 Fax: +44 (0) 1252 770702

Email: info@hyster.co.uk http://www.hyster.co.uk

A division of NACCO Materials Handling Limited.

06/06/TLC Printed in EnglandForm No. 901040/0

Hyster®, ®, Vista® and Monotrol® are registered trademarks of Hyster Company in the United States and in certain other countries.TM, FortensTM, Pacesetter VSMTM, DuraMatchTM, DuraMatch PlusTM, TouchPointTM, TouchControlTM, EZXchange & HSMTM are trademarks

of Hyster Company in the United States and in certain other countries. TM

Strong Partners, Tough Trucks,

for Demanding Operations Everywhere.

Hyster supplies a complete product range,

including Warehouse trucks, IC and Electric

Counterbalanced trucks, Container Handlers

and Reach Stackers.

Hyster is committed to being much more than a

lift truck supplier. Our aim is to offer a complete

partnership capable of responding to the full

spectrum of materials handling issues:

Whether you need professional consultancy on

your fleet management, fully qualified service

support, or reliable parts supply, you can

depend on Hyster. Our network of highly trained

dealers provides expert, responsive local

support.

They can offer cost-effective finance packages

and introduce effectively managed maintenance

programmes to ensure that you get the best

possible value. Our business is dealing with

your materials handling needs so you can focus

on the success of your business today and in

the future.