fossil energy production clean gas solutions
TRANSCRIPT
Fossil Energy Production
CLEAN GASSOLUTIONS
AHT F 116 • AHT F 123
A.H.T. Services GmbH – Your specialist for gas production
plants and synthesis gas power plants for the generation
of electrical and thermal energy.
In the implementation of this sophisticated technology we draw from over 100 years of experience and development of the well-proven double combustion process from Klöckner-Humboldt-Deutz (KHD). Thanks to a combination of many years‘ experience and innovative continued development AHT offers the perfect solutions for any form of crude or clean gas extraction from the most varied types of coal.
BRIEF PROFILE AHT – GAS PRODUCTION
HISTORY
AHT – GAS EXTRACTION FROM COAL
OUR EXPERIENCE – YOUR ADVANTAGE
Thanks to our continuously developed and improved gas producers, a particularly clean gas is already produced during the gas production stage, before being stripped of all foreign particles in the wet wash.
The clean gas extracted is then the perfect fuel for all applications, from efficient generators through to sophisticated combustion sys-tems. Clean and low maintenance combustion guarantees the highest efficiency and enables excellent profitability with maximum electrical and heat output.
For less demanding applications the gas purification process can be dispensed with and the extracted crude gas directly fed into a burner / boiler system.
• Use of the most varied types of coal
• Highly efficient process for heat and electricity
• Excellent profitability in comparison with natural gas, oil and diesel
Schematic composition of gas producers and gas processing.
The centerpiece of gas production is the state-of-the-art and efficient gas producer. The process of producing gas occurs in the reactor at temperatures of up to 1,200°C.Corresponding temperature zones form in the reactor under the influence of measured addition of atmospheric oxygen. The decomposition reactions take place within these zones, thereby converting the input material into a combustible process gas. Unwanted tars and other harmful materials are cracked in a high temperature zone, which converts as much of the material as possible into gas.
GAS PRODUCTION
GAS PURIFICATION
The process gas produced is stripped of the remaining by-products through a process of gas purification. Here a combination of wet washing and cooling filters the gas. In the final purification stage, the downstream, specially developed wet electrostatic precipitators remove the remaining harmful aerosols.
The benefits of high gas purity:+ operationally reliable transport of the gas over long distances+ highly efficient conversion in demanding generators or burner systems+ highest efficiencies+ low maintenance
ENERGY CONVERSION
With the purified gas, depending on the application require-ments, a generator or burner system can be operated.
Here the advantage of efficient gas purification comes into full effect:The clean gas extracted enables both the substitution of natural gas, oil and diesel in burner systems as well as use in gas generators.
VISIT WWW.AHT-SERVICES.COM TO FIND OUT MORE ABOUT US.
AHT ENERGY PRODUCER WITH FOSSIL INPUT FUELS
500 kW
450 kW
340 kg/h
950 Nm³/h
89 %
350 m²
11 m
1000 kW
900 kW
680 kg/h
1900 Nm³/h
89 %
700 m²
14 m
7000 kW
6300 kW
4760 kg/h
13.300 Nm³/h
89 %
4900 m²
14 m
Electrical output el 3
Thermal output th (optional)
Coal consumption
Gas flow volume
Total efficiency (el + th)
Space requirements
Maximum required height
F 116 F 123 7 x F 123 2AHT-MODEL RANGE 1
1 Figures based on the following (recommended) coal: Energy content ca. 20 MJ / kg, < 10% moisture content, < 7% ash content
2 The modules can be expanded as desired, see e.g. layout 7-MW plant.
3 Electrical efficiency of the motor 37 %.
OUTPUT DATA • CONSUMPTION • MASS
Layout example:7-MW plant by AHT
AHT energy production stands out with its exceptional level of performance and efficiency. Sometimes however this alone is not enough. It is for this reason that we have a flexible approach to the plant as a whole. It is implemented to suit individual circumstances and is adapted to the needs of the customer. From the installation site through to the individual, defined interfaces, e.g. for heat extraction, AHT Systems offers the flexibility every project demands.
FLEXIBILITY
A.H.T Services GmbHDiepenbroich 1551491 Overath - Germany+49 (0) 2206 95 190 - 0+49 (0) 2206 95 190 - [email protected]
Legal jurisdiction: Amtsgericht Köln // HRB 68297Managing director: Dipl.-Ing. Gero Ferges
© 2014 A.H.T. Services GmbHEditorial and technical changes reservedDate: October 2014Art. no. 1-023-930 | EN
THE PLANT SCHEMATIC
AN OVERVIEW OF THE WHOLE PROCESS
Input material feedAir intakeCoal-gas producerCyclone separatorPrecoolerGas washerMain gas cooler
Electrostatic precipitatorAsh and particle accumulatorWaste water containerWater processingGas flareGas fanGenerator / Burner
1
2
3
4
5
6
7
8
9
10
11
12
13
14