for kushal
TRANSCRIPT
-
8/8/2019 For Kushal
1/11
It uses a programmable memory to storeinstructions and execute specific functions
/ , , ,that include ON OFF control timing counting, .sequencing arithmetic and data handling
Intro:
-
8/8/2019 For Kushal
2/11
2
Basic principle of plc:
A Programmable logic controller is acomputer type device used to controlequipment in an industrial facility.
In traditional industry control system, all thedevices are directly wired to each otheraccording to how the system is supposed tooperate but in PLC all devices are wired to itinstead of each other.
Control program inside PLC provideconnection between the devices. Which tellsPLC whats supposed to be going on in thesystem.
-
8/8/2019 For Kushal
3/11
INPUTS
The input screw terminals on a PLCfrom the interface by which fielddevices are connected to the PLC.
The itemsInputsinclude such astool buttons, thumbwheels, limitswitches, selector switches,
proximity sensors and photoelectricsensors
-
8/8/2019 For Kushal
4/11
OUTPUTS
Output circuits operate in a manner similar to i/pcircuits: signals from the CPU pass through anisolation barrier before energizing o/p circuits.PLC use a variety of o/p circuits to energies
their o/p terminals: relays, transistors and triac.
-
8/8/2019 For Kushal
5/11
CENTRAL PROCESSING UNIT
The CPU made up of a microprocessor and a memorysystem, forms the primary component of the PLC
The CPU reads the inputs, executes logics as dictated bythe application program, performs calculations andcontrols the output.
PLC users works with two areas of the CPU: program files and data files.
Program files stores the user application program,subordinate files and the error files.
Data files store data associated with the program such as
input, counter/timer preset and accumulates the valves. Together, these two areas are called application memo0ry
or user memory.
-
8/8/2019 For Kushal
6/11
6
PLC consists of mainly three components: Central processing unit: CPU is the brain of
plc. It is able to do following operations:
A.Updating inputs and outputs.B.Performing logic n arithmetic operations.
C.Communicating with memory.
D.Scanning application programs.
MEMORY:A.Memory is the component to store memory.
B.The 2 common types of memory used in plcis RAM and ROM.
C.Memory capacities are often expressed forRAM in terms of kilo-bytes.
D.16K memory means there are16*1024=16348 bytes of RAM.
-
8/8/2019 For Kushal
7/11
7
PLC ADVANTAGES
Flexibility: In the past each different electronically
controlled production machine requiredits own controller. Now it is possible to
use just on model of a PLC to run anyone among a group machines.
Implementing changes and
correcting errors: When a PLC circuit of sequence design
change is made, the PLC program canbe changed from a key board sequencein a matter of minutes. No rewiring is
required for a PLC controlled system.
-
8/8/2019 For Kushal
8/11
8
Lower Cost: Increased technology makes it
possible more functions into smaller
and less expensive packages.
Visual Observation: A PLC circuits operation can be seen
during operation directly on a CRTscreen.
Speed of Operation: The operational speed for the PLC
program is very fast which a matter ofmilliseconds is.
-
8/8/2019 For Kushal
9/11
9
DISADVANTAGES
Environmental Considerations: Certain process environments such
as high heat and vibration interface
with electronic devices in PLCswhich limit their use.
o
Fixed Program Applications: Some applications are single
function applications. It does notpay to use a PLC that includes
multiple programming capabilities.
-
8/8/2019 For Kushal
10/11
10
Key Learning
How the automatic systems controlsthe process in industries?
To interface hardware with software.
Acquired knowledge about theimportance of PLC in daily life.
-
8/8/2019 For Kushal
11/11
Plc was (made) for the
main purpose that is costeffectiveness.
Today, one generallyaccepted rule is that PLCs
become economically
viable in control systemthat requires three to four
or more relays.