for closed circulating systems for ... - wilson hot...
TRANSCRIPT
industrial . commercial . domestic hot water
Dosing Pot Sizes & Specifications
DescriptionItem # Weight unfilled Standard Pressure & Temperature Diameter x Nominal Height
Stock item
Made to Order
No one knows hot water like...No one knows hot water like...
Wilson Chemical Dosing Pot A4 Folded Brochure FRONT COVER
For Closed Circulating Systems
For Closed Circulating Systems
Chemical Dosing Pot
Chemical Dosing Pot
Directions for Operation
WILDP14 216mm x 915mm14LT Dosing Pot 1MPA at 99˚C6.7 Kg
Pipe DiameterItem # DimensionsDescription
HCM0500 2 port corrosion coupon pack3/4” 450 x 220
HCM0510 3 port corrosion coupon pack3/4” 450 x 380
DescriptionItem # Weight unfilled Standard Pressure & Temperature Diameter x Nominal Height
WILDP07 216mm x 740mm7LT Dosing Pot 1MPA at 99˚C5.2 Kg
WILDP15 216mm x 970mm15LT Dosing Pot 1MPA at 99˚C6.7 Kg
WILDP20 216mm x 1100mm20LT Dosing Pot 1MPA at 99˚C8.2 Kg
WILDP25 216mm x 1230mm25LT Dosing Pot 1MPA at 99˚C9.3 Kg
WILDP40 318mm x 1090mm40LT Dosing Pot 1MPA at 99˚C12.3 Kg
WILDP45 318mm x 1145mm45LT Dosing Pot 1MPA at 99˚C13.1 Kg
1800 302 [email protected]
FREE CALL
Unit 4/54 Malvern Street BayswaterVictoria 3153 Australiawww.wilsonhotwater.com.au
Coupon Racks SpecificationsWe also build corrosion coupons and racks.
Chemical Dosing Pot
1.
2.
3.
5. Open isolation Valves C & D to allow circulation through the pot into the system to be treated.
6. Allow sufficient time for chemical treatment to be flushed into the main system.
7. Close Valves C & D to isolate the pot from the main system.
For closed circulating systemsSpecifications below are based on grade 304 stainless steel and stainless steel overflow. All other sizes are made to order. All sizes made to order in grade 316 stainless steel. Higher pressure ratings are available.
Directions for Installation
Valve D must be connected to the flow line, or circulating pump discharge line.
Valve C must be connected to the return line, or circulating pump suction line.
Valve E is connected to the trade waste water system.
C contractor to install 15NB or1/2’’ bore pipe
B
D
E
A
contractor to install isolating valves
WASTE
RETURN LINE
FLOW LINE
for a typical 14 litre dosing pot
Chemical Dosing Pot
1. Close isolating Valves C & D.
2. Open dosing pot fill Valve A, air-venting Valve B, & drain Valve E, to empty pot.
3. Close drain Valve E, and fill the dosing pot with the appropriate product through the funnel.
4. Close valves A & B to seal pot.
industrial . commercial . domestic hot water
Dosing Pot Sizes & Specifications
DescriptionItem # Weight unfilled Standard Pressure & Temperature Diameter x Nominal Height
Stock item
Made to Order
No one knows hot water like...No one knows hot water like...
Wilson Chemical Dosing Pot A4 Folded Brochure FRONT COVER
For Closed Circulating Systems
For Closed Circulating Systems
Chemical Dosing Pot
Chemical Dosing Pot
Directions for Operation
WILDP14 216mm x 915mm14LT Dosing Pot 1MPA at 99˚C6.7 Kg
Pipe DiameterItem # DimensionsDescription
HCM0500 2 port corrosion coupon pack3/4” 450 x 220
HCM0510 3 port corrosion coupon pack3/4” 450 x 380
DescriptionItem # Weight unfilled Standard Pressure & Temperature Diameter x Nominal Height
WILDP07 216mm x 740mm7LT Dosing Pot 1MPA at 99˚C5.2 Kg
WILDP15 216mm x 970mm15LT Dosing Pot 1MPA at 99˚C6.7 Kg
WILDP20 216mm x 1100mm20LT Dosing Pot 1MPA at 99˚C8.2 Kg
WILDP25 216mm x 1230mm25LT Dosing Pot 1MPA at 99˚C9.3 Kg
WILDP40 318mm x 1090mm40LT Dosing Pot 1MPA at 99˚C12.3 Kg
WILDP45 318mm x 1145mm45LT Dosing Pot 1MPA at 99˚C13.1 Kg
1800 302 [email protected]
FREE CALL
Unit 4/54 Malvern Street BayswaterVictoria 3153 Australiawww.wilsonhotwater.com.au
Coupon Racks SpecificationsWe also build corrosion coupons and racks.
Chemical Dosing Pot
1.
2.
3.
5. Open isolation Valves C & D to allow circulation through the pot into the system to be treated.
6. Allow sufficient time for chemical treatment to be flushed into the main system.
7. Close Valves C & D to isolate the pot from the main system.
For closed circulating systemsSpecifications below are based on grade 304 stainless steel and stainless steel overflow. All other sizes are made to order. All sizes made to order in grade 316 stainless steel. Higher pressure ratings are available.
Directions for Installation
Valve D must be connected to the flow line, or circulating pump discharge line.
Valve C must be connected to the return line, or circulating pump suction line.
Valve E is connected to the trade waste water system.
C contractor to install 15NB or1/2’’ bore pipe
B
D
E
A
contractor to install isolating valves
WASTE
RETURN LINE
FLOW LINE
for a typical 14 litre dosing pot
Chemical Dosing Pot
1. Close isolating Valves C & D.
2. Open dosing pot fill Valve A, air-venting Valve B, & drain Valve E, to empty pot.
3. Close drain Valve E, and fill the dosing pot with the appropriate product through the funnel.
4. Close valves A & B to seal pot.
industrial . commercial . domestic hot water
Dosing Pot Sizes & Specifications
DescriptionItem # Weight unfilled Standard Pressure & Temperature Diameter x Nominal Height
Stock item
Made to Order
No one knows hot water like...No one knows hot water like...
Wilson Chemical Dosing Pot A4 Folded Brochure FRONT COVER
For Closed Circulating Systems
For Closed Circulating Systems
Chemical Dosing Pot
Chemical Dosing Pot
Directions for Operation
WILDP14 216mm x 915mm14LT Dosing Pot 1MPA at 99˚C6.7 Kg
Pipe DiameterItem # DimensionsDescription
HCM0500 2 port corrosion coupon pack3/4” 450 x 220
HCM0510 3 port corrosion coupon pack3/4” 450 x 380
DescriptionItem # Weight unfilled Standard Pressure & Temperature Diameter x Nominal Height
WILDP07 216mm x 740mm7LT Dosing Pot 1MPA at 99˚C5.2 Kg
WILDP15 216mm x 970mm15LT Dosing Pot 1MPA at 99˚C6.7 Kg
WILDP20 216mm x 1100mm20LT Dosing Pot 1MPA at 99˚C8.2 Kg
WILDP25 216mm x 1230mm25LT Dosing Pot 1MPA at 99˚C9.3 Kg
WILDP40 318mm x 1090mm40LT Dosing Pot 1MPA at 99˚C12.3 Kg
WILDP45 318mm x 1145mm45LT Dosing Pot 1MPA at 99˚C13.1 Kg
1800 302 [email protected]
FREE CALL
Unit 4/54 Malvern Street BayswaterVictoria 3153 Australiawww.wilsonhotwater.com.au
Coupon Racks SpecificationsWe also build corrosion coupons and racks.
Chemical Dosing Pot
1.
2.
3.
5. Open isolation Valves C & D to allow circulation through the pot into the system to be treated.
6. Allow sufficient time for chemical treatment to be flushed into the main system.
7. Close Valves C & D to isolate the pot from the main system.
For closed circulating systemsSpecifications below are based on grade 304 stainless steel and stainless steel overflow. All other sizes are made to order. All sizes made to order in grade 316 stainless steel. Higher pressure ratings are available.
Directions for Installation
Valve D must be connected to the flow line, or circulating pump discharge line.
Valve C must be connected to the return line, or circulating pump suction line.
Valve E is connected to the trade waste water system.
C contractor to install 15NB or1/2’’ bore pipe
B
D
E
A
contractor to install isolating valves
WASTE
RETURN LINE
FLOW LINE
for a typical 14 litre dosing pot
Chemical Dosing Pot
1. Close isolating Valves C & D.
2. Open dosing pot fill Valve A, air-venting Valve B, & drain Valve E, to empty pot.
3. Close drain Valve E, and fill the dosing pot with the appropriate product through the funnel.
4. Close valves A & B to seal pot.
industrial . commercial . domestic hot water
Dosing Pot Sizes & Specifications
DescriptionItem # Weight unfilled Standard Pressure & Temperature Diameter x Nominal Height
Stock item
Made to Order
No one knows hot water like...No one knows hot water like...
Wilson Chemical Dosing Pot A4 Folded Brochure FRONT COVER
For Closed Circulating Systems
For Closed Circulating Systems
Chemical Dosing Pot
Chemical Dosing Pot
Directions for Operation
WILDP14 216mm x 915mm14LT Dosing Pot 1MPA at 99˚C6.7 Kg
Pipe DiameterItem # DimensionsDescription
HCM0500 2 port corrosion coupon pack3/4” 450 x 220
HCM0510 3 port corrosion coupon pack3/4” 450 x 380
DescriptionItem # Weight unfilled Standard Pressure & Temperature Diameter x Nominal Height
WILDP07 216mm x 740mm7LT Dosing Pot 1MPA at 99˚C5.2 Kg
WILDP15 216mm x 970mm15LT Dosing Pot 1MPA at 99˚C6.7 Kg
WILDP20 216mm x 1100mm20LT Dosing Pot 1MPA at 99˚C8.2 Kg
WILDP25 216mm x 1230mm25LT Dosing Pot 1MPA at 99˚C9.3 Kg
WILDP40 318mm x 1090mm40LT Dosing Pot 1MPA at 99˚C12.3 Kg
WILDP45 318mm x 1145mm45LT Dosing Pot 1MPA at 99˚C13.1 Kg
1800 302 [email protected]
FREE CALL
Unit 4/54 Malvern Street BayswaterVictoria 3153 Australiawww.wilsonhotwater.com.au
Coupon Racks SpecificationsWe also build corrosion coupons and racks.
Chemical Dosing Pot
1.
2.
3.
5. Open isolation Valves C & D to allow circulation through the pot into the system to be treated.
6. Allow sufficient time for chemical treatment to be flushed into the main system.
7. Close Valves C & D to isolate the pot from the main system.
For closed circulating systemsSpecifications below are based on grade 304 stainless steel and stainless steel overflow. All other sizes are made to order. All sizes made to order in grade 316 stainless steel. Higher pressure ratings are available.
Directions for Installation
Valve D must be connected to the flow line, or circulating pump discharge line.
Valve C must be connected to the return line, or circulating pump suction line.
Valve E is connected to the trade waste water system.
C contractor to install 15NB or1/2’’ bore pipe
B
D
E
A
contractor to install isolating valves
WASTE
RETURN LINE
FLOW LINE
for a typical 14 litre dosing pot
Chemical Dosing Pot
1. Close isolating Valves C & D.
2. Open dosing pot fill Valve A, air-venting Valve B, & drain Valve E, to empty pot.
3. Close drain Valve E, and fill the dosing pot with the appropriate product through the funnel.
4. Close valves A & B to seal pot.