flooring - celtic building supply

Call 914-665-8864

FLOORINGCATALOGBUILDING SUPPLIES

BUILDING SUPPLIES

BUILDING SUPPLIESNEW 2013 PRODUCTS

FROM DRYTEK® -THE SMARTER SOLUTION

CLEAN-UP• Scrapers

• Brooms & Shovels

• Vacuums

• Dust Mask

• Gloves

• Garbage Bags & Cans

• Jobox

PREPARATION• Spray Foam

• Grinders & Accessories

• Caulk

• Primers Rollers Sleeves Brushes

• Measuring Leveling Pegs Floormaster Marking Equipment Measuring Card

• Utility Knifes

• Scissors

• Floor Fans

PROTECTION• Paper Rosin Reinforced Kraft

• Masonite

• Surface Shields Carpet, hardwood, metal

• Homasote

• Tapes Blue, Duct, Green, Masking

• Corex

• Builder Board

TOOLS• Application Tools

• Pumps

• Hoses

• Barrel Carts

• Mixing Drill & Cords

• Trowels

PRODUCTSDRYTEK® SELF-LEVELING UNDERLAYMENTS• Premium 3000• Standard 7000• Premium 7200• Super 7400• Super 7600

DECORATIVE TOPPINGS• DRYTEK® SELF-LEVELING WEAR SURFACES >Super 9400• DRYTEK® STONE FINISH• DRYTEK® DCF

PATCH & SKIMCOAT• DRYTEK® 8400• DRYTEK® SKIMCOAT

UNDERLAYMENT• Styrofoam

• Plywood

• Cement Board

• Hardi Backer

• Application Tools

• Adhesives

• Shot & Pins

• Nails & Course Screws

Call 914 665 8864

YOUR DREAM TEAM

Dave GlaDsteinCeltic In-house Flooring Expert

Cell 914-665-8864

tom leahyDrytek Technical Sales Rep

Cell 603-969-3867

Jimmy Baratta Drytek Technical Sales Rep

Cell 347-374-7400

CeltiC ServiCe Guarantee

Customer serviCe is essentialto our suCCess.

We perpetually strive to provide our Customers With a Combination of value

added serviCes Coupled With superior produCts at Competitive priCes.

every member of our team is empoWered to maximize the Customer’s serviCe experienCe on every transaCtion.

that is the CeltiC serviCe Guarantee.

MOISTURE CONTROL• DRYTEK® MVB

FUNCTIONAL COATINGS• DRYTEK® Flowdeck• DRYTEK® SCS Sealer

REINFORCEMENT & SOUND CONTROL• DRYTEK® DM1 Reinforcement

• DRYTEK® DM2 Sound Control

• DRYTEK® DM3 Low Profile Sound Control

Call 914-665-8864 Call 914-665-8864

CLEAN-UP

Scrapers

Brooms & shovels

Vacums

Dust Mask

Gloves

Garbage bags & Cans

Jobox

Vacuums & Accessories

Bins & Baskets

Brooms, Shovels & Scrapers

Contractor bags

Gloves (Cotton, Latex, Leather, PVC

Coated, Rubber, Split Leather)

CELTIC TIP Avoid using ‘Green Dust’ when applying self-leveling due to chemicals in the ‘Green Dust’.

Dust Masks

COMPLETE RANGE OF JOBOX AVAILABLE

Call 914 665 8864

Call 914-665-8864 Call 914-665-8864

PREPARATION

Scrapers

Brooms & shovels

Vacums

Dust Mask

Gloves

Garbage bags & Cans

Jobox

Grinders & Accessories Caulks Spray Foams

Primer(Rollers, Sleeves & Brushes)

Leveling Pegs Floormaster

Marking Equipment Measuring Card Utility Knifes & Scissors

Flex-guard Flooring Fans 18” Heavy-DutyJobsite Cart Fan

NEW!

Call 914-665-8864 Call 914-665-8864

TOOLS

MP-25 Mix, Pump and Spray most pre-blended cementitious construction materials with a single easy to use machine. Self Leveling Underlayments and Toppings, Concrete Repair Mortars, Grouts and Fireproofing are all suited applications.

Call Dave at 914 665 8864

Barrels & CartsHoses

TrowelsMixers

Self-Leveling Tools Air Mover from Shop•Vac

NEW!

Call 914-665-8864 Call 914-665-8864

FA$TER OCCUPANCy.A GREATER LEvEL OF QUALITy.

A LOwER COST.

Today you and other contractors face multiple challenges in the field. Each project has a number of unique requirements. Architects want a particular look, owners want projects completed ahead of schedule and under budget, and you demand the highest quality. Drytek’s line of products will help you achieve all of these.

Fast Drying Drytek’s self-leveling products, such as Drytek

7200, provide contractors with a superior self-

leveling underlayment that is designed for use over

various substrates, including concrete and ceramic

tile. Drytek’s full line of proprietary cement-based

formulations provide an extremely smooth surface

on which sensitive finished floor goods can be laid

directly without additional preparation. This saves

you both time and money.

Innovative productsAs a contractor you encounter a number of

unique challenges on every job site. Drytek is

continuously innovating to help you meet these

challenges. For example, Drytek’s FlowLite

system provides superior strength to weight

ratios. Drytek FlowLite is also ideal for install-

ing radiant heat and exhibits superior sound

deadening properties.

Low-Alkali Cement

(LAC) technology

LOW-ALKALICEMENT

(LAC) technology

Highest Ethical StandardsOur company is built around sound business

principles and guided by a code of ethics which

pervades company culture and is visible both inside

and outside the organization. Often referred to as the

“Good Guys”, we operate on the idea that current and

future success is a product of the manner in which an

organization conducts its affairs. Honesty, fairness

and reciprocity are basic values that one can expect

when dealing with our organization.

SMARTER FLOORING SOLUTIONS

SELF-LEVELING UNDERLAYMENTS

DRYTEK® 7400A superior quality, fast-drying, dual purpose self-leveling cement that can be used both as a durable and attractive interior wear surface as well as a high-performance underlayment for troubled substrates. For application over a wide variety of substrates.

DRYTEK® 7000An economical, self-leveling, cement-based underlayment designed for use over various substrates, including concrete and ceramic tile.

DRYTEK® 7200A high quality, self-leveling underlayment designed for use over various substrates, including concrete and ceramic tile. Its proprietary formula provides a highly smooth surface on which sensitive finished floor goods can be laid directly without additional preparation.

DRYTEK® 7600A premium quality, cement-based self-leveling underlayment. Its fast-drying formula is designed for use over a wide range of substrates, including concrete, PVC, VCT, wood, ceramic and quarry tile. Contains special fibers which provide added reinforcement. Recommended for use with radiant heating systems.

TECHNICAL INFORMATION DRYTEK® 7000 DRYTEK® 7200 DRYTEK® 7400 DRYTEK® 7600

Pour Depths 1/8”- 2” 1/8”- 1¼ ” 1/16”- 1¼ ” 1/8”- 2”

Coverage at ¼” thickness per 55lb bag 28 ft2 30 ft2 32 ft2 28 ft2

Tensile Bond Strength(to concrete) > 435 PSI > 435 PSI > 435 PSI > 435 PSI

Flexural Strength 870 PSI 1160 PSI 1160 PSI 1300 PSI

Compressive Strength (28 days) 3900 PSI 4350 PSI 6400 PSI 6400 PSI

Dry Density 106 lb / ft³ 100 lb / ft³ 100 lb / ft³ 106 lb / ft³

Installed Weight per ft²@ ¼” thickness 2.21 lbs 2.08 lbs 2.08 lbs 2.21 lbs

Ideal Slump Range 10-11 inches 11-12 inches 11-12 inches 10-11 inches

Shrinkage .01-.03% .01-.03% .01-.03% .01-.03%

pH (wet state) 9-11 9-11 9-11 9-11

Working Time 15-20 minutes 15-20 minutes 15-20 minutes 15-20 minutes

Walkable Time 1-4 hours 1-4 hours 1-2 hours 1-2 hours

Install Floor Goods 3 days 16 hours as soon as 6 hours as soon as 6 hours

Good Better Best Fiber

DECORATIVE TOPPINGS

DRYTEK® SELF-LEVELING WEAR SURFACESDRYTEK’s self-leveling wear surface cement combines the benefits of our underlayments with the ability to create aesthetically pleasing colored finished floors. Our pourable and pumpable wear surface cements allow designers and architects to create functional floors with the look of concrete. Available in grey, white or color of choice.

DRYTEK® 9400A premium quality self-leveling, fast drying wear surface cement. DRYTEK® 9400 may be integrally tinted, making it the designers choice for attractive finished floors. Superior abrasion resistance makes it perfect for multiple environments such as retail, warehouse, and manufacturing facilities.

TECHNICAL INFORMATION DRYTEK® 9400

Pour Depths 1/8”- 1/2”

Coverage at ¼” thickness per55lb bag

30 ft2

Tensile Bond Strength (to concrete) > 435 PSI

Flexural Strength 1450 PSI

Compressive Strength (28 days) 5800 PSI

Dry Density 100 lb / ft³

Installed Weight per ft²@ ¼”thickness

2.08 lbs

Ideal Slump Range 10-11 inches

Shrinkage .01-.03%

pH (wet state) 9-11

Working Time 15-20 minutes

Walkable Time 1-2 hours

DRYTEK® STONE FINISHDRYTEK® STONE FINISH is an innovative ready-mixed coating system that provides an attractive, durable wear surface with the look and feel of natural stone. Thirty standard stonelooks are available.

TECHNICAL INFORMATION DRYTEK® STONE FINISH

Application Depth ~1/8”

Coverage per 5 gallon pail 100 to 140 ft2

Shelf Life 12 months

Flexural Strength > 125 PSI

Flame Spread0

(ASTM-84 < 25 flame spread)

Smoke Developed5

(ASTM-84 < 450 smoke developed)


FEATURES AND BENEFITS• Formulated for durability and abrasion resistance• Fine aggregate in pure acrylic binder creates stone look• Spray and/or trowel apply to create a non-skid finish• Hard trowel apply to create a smooth finish• Ready-mixed single component system• Provides a seamless vapor permeable surface• Safe, water-based formulation is VOC compliant• Interior or Exterior• Low maintenance

DRYTEK® DCF – The Ultimate MicrotoppingDRYTEK® DCF is the ultimate decorative and functional finish for a variety of surfaces. Exceptionally user-friendly, DCF can be applied as an ultra smooth surface by trowel, squeegee or sprayer to create a myriad of desirable visual effects and appearances. The high strength and abrasion resistance of DCF makes it an excellent finished flooring system for shopping centers, retail, hospitality, lobbies and any interior floor or wall where a high style, decorative surface is desired. DCF is an economical one component, just-add-water, system, allowing for ease of storage and simplicity at the job site. Pigmenting DCF can be done integrally, with liquid pigments, or topically using stains and/or dyes.

TECHNICAL INFORMATION DRYTEK® DCF

Pour Depths ~1/8”

Coverage at 1/16” thickness per 40 LB bag 89 ft2

Tensile Bond Strength(to concrete) > 435 PSI




Shrinkage .01-.03%

pH (wet state) 9-11



FEATURES AND BENEFITS• Economical one component system mixed with water• Exhibits superior abrasion resistance and compressive strength• Extremely versatile and can be applied by trowel, squeegee, or airless sprayer from 1/8” to a zero edge, both horizontally and vertically• Spray application allows for extreme labor savings and fast turnaround• Cement-based microtopping, valued for its natural concrete look• Ideal canvas for using various stains and a wide variety of coloring systems

DRYTEK’s innovative self-leveling cements speed up turn-around time and reduce total project cost. Save both time and money by using DRYTEK’s Smarter Self-Leveling Underlayment Solutions.

DRYTEK self-leveling cements can be applied directly to new or moist concrete without having to apply a moisture barrier or waiting until the slab dries. Our cements can be applied directly to substrates with RH levels as high as 95% and glued-down floor goods can be applied shortly thereafter.

Alkali Barrier: All DRYTEK self-leveling cements areuniquely formulated Low Alkali Cements (LAC) which block alkali migration and mitigate the risks of adhesive deterioration and subsequent bond loss.

High Bond Strength / Low Shrinkage: DRYTEK self-leveling cements are formulated to exhibit extremely low shrinkage which results in a very high strength matrix.

Water Damage Stable: Unlike many portland/gypsum levelers, DRYTEK self-leveling cements will not deteriorateif moisture is present.







Pour Depths 1/8”- 2” 1/8”- 1¼ ” 1/16”- 1¼ ” 1/8”- 2”








Shrinkage .01-.03% .01-.03% .01-.03% .01-.03%

pH (wet state) 9-11 9-11 9-11 9-11





DECORATIVE TOPPINGS






30 ft2






2.08 lbs


Shrinkage .01-.03%

pH (wet state) 9-11









Flame Spread0


Smoke Developed5






Pour Depths ~1/8”






Shrinkage .01-.03%

pH (wet state) 9-11










DRYTEK® 4000 The value-engineered, easy-to-use, self-leveling underlayment designed for use over various substrates including concrete and ceramic tile.

DRYTEK® 3000 The revolutionary, fast-setting, lightweight cement made from a proprietary formula of cement and lightweight aggregate particles. These lightweight particles give this product a range of unique properties.







Pour Depths 1/8”- 2” 1/8”- 1¼ ” 1/16”- 1¼ ” 1/8”- 2”








Shrinkage .01-.03% .01-.03% .01-.03% .01-.03%

pH (wet state) 9-11 9-11 9-11 9-11





DECORATIVE TOPPINGS






30 ft2






2.08 lbs


Shrinkage .01-.03%

pH (wet state) 9-11









Flame Spread0


Smoke Developed5






Pour Depths ~1/8”






Shrinkage .01-.03%

pH (wet state) 9-11















Pour Depths 1/8”- 2” 1/8”- 1¼ ” 1/16”- 1¼ ” 1/8”- 2”








Shrinkage .01-.03% .01-.03% .01-.03% .01-.03%

pH (wet state) 9-11 9-11 9-11 9-11





DECORATIVE TOPPINGS






30 ft2






2.08 lbs


Shrinkage .01-.03%

pH (wet state) 9-11









Flame Spread0


Smoke Developed5






Pour Depths ~1/8”






Shrinkage .01-.03%

pH (wet state) 9-11















Pour Depths 1/8”- 2” 1/8”- 1¼ ” 1/16”- 1¼ ” 1/8”- 2”








Shrinkage .01-.03% .01-.03% .01-.03% .01-.03%

pH (wet state) 9-11 9-11 9-11 9-11





DECORATIVE TOPPINGS






30 ft2






2.08 lbs


Shrinkage .01-.03%

pH (wet state) 9-11









Flame Spread0


Smoke Developed5






Pour Depths ~1/8”






Shrinkage .01-.03%

pH (wet state) 9-11















Pour Depths 1/8”- 2” 1/8”- 1¼ ” 1/16”- 1¼ ” 1/8”- 2”








Shrinkage .01-.03% .01-.03% .01-.03% .01-.03%

pH (wet state) 9-11 9-11 9-11 9-11





DECORATIVE TOPPINGS






30 ft2






2.08 lbs


Shrinkage .01-.03%

pH (wet state) 9-11









Flame Spread0


Smoke Developed5






Pour Depths ~1/8”






Shrinkage .01-.03%

pH (wet state) 9-11















Pour Depths 1/8”- 2” 1/8”- 1¼ ” 1/16”- 1¼ ” 1/8”- 2”








Shrinkage .01-.03% .01-.03% .01-.03% .01-.03%

pH (wet state) 9-11 9-11 9-11 9-11





DECORATIVE TOPPINGS






30 ft2






2.08 lbs


Shrinkage .01-.03%

pH (wet state) 9-11









Flame Spread0


Smoke Developed5






Pour Depths ~1/8”






Shrinkage .01-.03%

pH (wet state) 9-11









Call 914-665-8864 Call 914-665-8864







Pour Depths 1/8”- 2” 1/8”- 1¼ ” 1/16”- 1¼ ” 1/8”- 2”








Shrinkage .01-.03% .01-.03% .01-.03% .01-.03%

pH (wet state) 9-11 9-11 9-11 9-11





DECORATIVE TOPPINGS






30 ft2






2.08 lbs


Shrinkage .01-.03%

pH (wet state) 9-11









Flame Spread0


Smoke Developed5






Pour Depths ~1/8”






Shrinkage .01-.03%

pH (wet state) 9-11









DECORATIVE TOPPINGS 608 Premium Urethane Sealer

Data Sheets are subject to change without notice. For latest revision, check our website at www.laticrete.com. DS-049.0-0312

1. PRODUCT NAME DRYTEK® 608 Premium Urethane Sealer 2. MANUFACTURER LATICRETE International, Inc. 1 LATICRETE Park North Bethany, CT 06524-3423 USA Telephone: +1.877.DRYTEK1, ext. 247 or; +1.877. 379.8351, ext. 247 Fax: +1.203.393.1684 Internet: www.drytek.com 3. PRODUCT DESCRIPTION DRYTEK 608 Premium Urethane Sealer is a clear, water-based, catalyzed aliphatic urethane emulsion sealer. Exhibits excellent abrasion resistance without the solvent odors associated with other urethane products. Extremely fast set time and a very long pot life. Advantages Formulated for use over DRYTEK Wear Surfaces and

Decorative Toppings such as - DRYTEK 7400 - DRYTEK 9400

For use in more demanding environments such as high foot traffic areas, industrial spaces, etc.

Suitable Substrates DRYTEK Wear Surfaces and Decorative Toppings Packaging Two component kit containing: 8.5 lb (3.9 kg) Part A and 1.8 oz. (50 grams) Part B Color Clear

Approximate Coverage Yield/coverage is only an estimate and may vary depending on the amount of water, mixing equipment, temperature and field conditions. For 5 gallons 2,000 – 2,675 ft2 (185 – 248 m2) at 3–4 mils (0.08–0.10 mm) wet thickness

Approximately Coverage 400–535 ft2 per gallon (37–49.5 m2) at 3–4 mils (0.08–0.10 mm) wet thickness

Shelf Life Transport and store in clean, dry conditions in unopened containers. Continuous storage temperature should be maintained between 60 and 90°F (16°–32°C). Protect from freezing. Use within twelve (12) months of date of manufacture. Limitations Sealers are not replacements for waterproofing mem-branes.

When a waterproofing membrane is required, use a LATICRETE® Waterproofing Membrane (see Section 10 FILING SYSTEMS).

When installing a DRYTEK Decorative Wear Surface System be sure to follow all instructions provided for each component of the system.

Clarity of color or gloss may be affected by high humidity, low temperatures, chemical exposure.

Lighting sources may affect appearance of color. Do not apply DRYTEK 608 Premium Urethane Sealer to areas

where there is standing water. DRYTEK 608 Premium Urethane Sealer should not be installed

over any moving joints or structural cracks (cracks greater than 1/16" [1.5 mm] in width or any crack that experiences any vertical displacement). All existing expansion joints, cold joints and control joints must be brought up through the underlayment and the finish. Failure to honor movement joints will result in cracking and/or loss of bond.

Note: Surfaces must be structurally sound, stable and rigid enough to support ceramic/stone tile, thin brick and similar finishes. Substrate deflection under all live, dead and impact loads, including concentrated loads, must not exceed L/360 for thin bed ceramic tile/brick installations or L/480 for thin bed stone installations where L=span length (except where local building codes specify more stringent deflection requirements)

Cautions Before using any DRYTEK product Read and understand the Product Data Sheet and Material

Safety Data Sheet.

608 Premium Urethane Sealer DS-049.0-0312

Call 914-665-8864 Call 914-665-8864

Self-Leveling Underlayments

Decorative Toppings

Patch & Skimcoat

Moisture Control

Functional Coatings

Reinforcement & Sound Control

SMARTERFLOORINGSOLUTIONS

DRYTEK® FlowDeckA premium quality decorative/protective coating for applications such as balconies, walkways, patios and pool decks. DRYTEK® FlowDeck is an acrylic modified, cementitious, flexible, waterproof membrane and can be spray, roller or stiff-bristle broom applied. For indoor or outdoor use.

PERFORMANCE CHARACTERISTICS

• Flexible - Able to bridge minor cracking

• Waterproof - Positive side waterproofing membrane (requires two coats)

• Decorative - Available in 11 colors to complement surroundings

• Durable - Resistant to weathering action, excellent freeze/thaw stability and abrasion resistance

• Very low permeability - Resistant to deicing salts, chloride, chemical attack, and environmental pollution

• Breathability - Will not cause damage to substrate by restricting moisture vapor flow; ideal for slab-on-grade

• Two component - Pre-measured, pigmented liquid with powder in one container for consistent performance

• Yield: 160 ft2 per 50 lb kit per coat @ 50 mils

• Seal with DRYTEK® SCS Sealer

DRYTEK® SCS SealerA premium quality, water-based acrylic sealer formulated to enhance appearance and protect horizontal concrete surfaces. Roller, spray or brush applied. Available in multiple standard colors formulated to be used with DRYTEK® FlowDeck.

DRYTEK® 8400A premium quality, fast drying underlayment patch designed for use over most substrates including concrete, wood, PVC, VCT, ceramic and quarry tile. Excellent for deep fills and trenching.

DRYTEK® SKIMCOATThe premium quality, fast-drying underlayment designed for skim-coating, smoothing and leveling prior to the application of floor coverings. Material may be applied from skim coat (featheredge) to 1 inch. Finished floor material may be installed as soon as 30 minutes after application depending on thickness, drying conditions and type of flooring material. This trowel-applied product has a superior creamy consistency making it the ideal choice for patching.

MOISTURE CONTROL

DRYTEK® MVBA premium water-based product that is easy to apply, fast drying, and provides an effective moisture vapor barrier. DRYTEK® MVB penetrates into the substrate to reduce moisture vapor transmission and improve surface alkalinity.

Performance Characteristics

• Reduce surface alkalinity of concrete with pH levels as high as 14 down to 9 or below

• Reduce moisture vapor emission rate (MVER) as high as 25 lbs down to 3 lbs or below

• Easy to mix two-part kits are blue in color to clearly indicate full coverage

• Non-blushing formula requires no solvent clean-up

FUNCTIONAL COATINGSPATCH & SKIMCOAT

DRYTEK® DM1 Reinforcement

DM1 is part of the DRYTEK REINFORCEMENT SYSTEM. The system includes DRYTEK’s specially designed reinforcement mat encapsulated in DRYTEK self-leveling cement.

Performance Characteristics • Designed for applications where substrate movement is a concern• Decouples surface systems from movement in the substrate• Entangled matrix of recycled nylon filaments provides reinforcement• Lightweight rolls replace cumbersome metal reinforcement lath• Woven fabric backing easy to handle and install• 40% post industrial recycled material used in matrix• Each 100 ft roll covers 325 square feet and weighs only 29 lbs

DRYTEK® DM2 Sound Control

DRYTEK® DM2 SOUND CONTROL MATis part of the DRYTEK SOUND CONTROL SYSTEM. The system includes DRYTEK’s specially designed mat capped with DRYTEK self-leveling cement. The DM2 sound mat can increase IIC by up to 12 points and STC by up to 6 points.*

Performance Characteristics • Designed for use in applications where sound transmission in floor/ceiling assemblies is a concern• Entangled matrix of recycled nylon filaments acts to decouple floor assembly from substrate greatly improving acoustical performance• Lightweight rolls are easy to handle and install• 40% post-industrial recycled material used in matrix• Each 100 ft roll covers 325 square feet and weighs only 44 lbs

Please visit www.drytek.com for the latest technical information.

DRYTEK® DM3 Low Profile Sound Control

DM3 is an ultra low-profile SOUND CONTROL MAT designed to be installed under DRYTEK self-leveling cements or directly beneath hardwood floor coverings.

Performance Characteristics • Designed for applications where floor assembly heights are limited

• DM3 mat thickness only 1/16”

• Hollow polymeric micro-fiber fabric provides effective sound barrier*

• When topped with DRYTEK self-leveling cement only 3/8” thickness required

*Actual acoustical performance is dependent on system design and construction of the floor ceiling assembly.

Drytek Flooring Solutions, LLC195 New Hampshire Ave Suite 240, Portsmouth, NH 03801

(877) DRYTEK-1www.drytek.com


At DRYTEK we strive to maintain the highest level of service in the industry. It is our mission to insure that your expectations are exceeded on every DRYTEK project.

Technical expertise combined with practical know-how is the cornerstone of our DRYTEK Service Philosophy. Quick response is achieved through a team effort and an ‘all hands on deck’ approach. Multiple channels of communication are effectively utilized in order to provide action and answers in a timely fashion. Experience the Smarter Flooring Solution by contacting your local distributor or calling DRYTEK toll-free at (877) DRYTEK-1.

REINFORCEMENT & SOUND CONTROL

DTTF20100315


Decorative Toppings

Patch & Skimcoat

Moisture Control

Functional Coatings

















MOISTURE CONTROL




























DTTF20100315


Decorative Toppings

Patch & Skimcoat

Moisture Control

Functional Coatings

















MOISTURE CONTROL




























DTTF20100315



Decorative Toppings

Patch & Skimcoat

Moisture Control

Functional Coatings

















MOISTURE CONTROL




























DTTF20100315

PATCH & SKIMCOAT MOISTURE CONTROL


Decorative Toppings

Patch & Skimcoat

Moisture Control

Functional Coatings

















MOISTURE CONTROL




























DTTF20100315

DRYTEK 104S PREMIUM EPOXY PRIMER

6 n www.drytek.com n Innovative Flooring Solutions Innovative Flooring Solutions n www.drytek.com n 7

Primers and SealersSound and moisture Control/reinforcement

dryTek multi-Purpose PrimerDRYTEK Multi-Purpose Primer is a concentrated premium quality, water-based primer designed to be applied prior to the installation of DRYTEK self-leveling underlayments and toppings. Contains non re-emulsifying latex polymers and selected surface activation agents which penetrate deeply into the substrate and maximize bond strength.

Packaging5 gal (19 l ) pail liquid; 36 units per pallet.

4 x 1 (3.8 l ) liquid packaged in a carton; 30 per pallet.

SUBSTraTe P:Wa CoverageB

Concrete 1:3 400 ft2 (37 m2)

Exterior glue plywood 5:1 200 ft2 (18.5 m2)

Ceramic tile, stone, cement, cement terrazzo

1:3 400 ft2 (37 m2)

Highly porous concrete, dry substrates, DRYTEK® 3000

First coat: 1:5 followed by second

coat of 1:3

200 ft2 (18.5 m2)

DRYTEK DM1 Reinforcement Mat 1:3

A. Dilution ratio – Primer: water B. Coverage in square feet (m2) per gallon of concentrated primer.

Refer to Data Sheet 047.0

dryTek 608 Premium Urethane SealerDRYTEK 608 Premium Urethane Sealer is a clear, two component, water-based, catalyzed aliphatic urethane emulsion sealer. Exhibits excellent abrasion resistance without the solvent odors associated with other urethane products.

PackagingTwo component kit containing: 8.5 lb (3.9 kg) DRYTEK 608 Premium Urethane Sealer Part A and 1.8 oz (50 grams) DRYTEK 608 Premium Urethane Sealer Part B.

aPProxImaTe Coverage400 – 535 ft2 (37 – 49.5 m2) at

3 – 4 mils wet thickness (0.08 – 0.1 mm)


dryTek 104S Premium epoxy PrimerDRYTEK 104S Premium Epoxy Primer is a two component, high-solids epoxy primer applied with a sand broadcast. Designed for use under DRYTEK 7400 and DRYTEK 9400 wear surface/decorative toppings to reduce substrate telegraphing and increase bond strength.

Packaging2 gallon kit (17.25 lb net 7.8 kg)

10 gallon kit (86.25 lb net 39.1 kg)

aPProxImaTe Coverage90 – 133 ft2 (8.3 – 12.3 m2) per 1 gallon (3.8 l ) at

12 – 18 mils (0.3 – 0.5 mm).

LaTICreTe® 170 Sound & Crack Isolation matLATICRETE® 170 Sound & Crack Isolation Mat is a high performance 1/8" (3 mm) thick underlayment membrane that provides exceptional sound reduction while simultaneously providing anti-fracture protection for the DRYTEK® Reinforcement Mat System. Ideal for schools, hotel, condominium and other applications requiring sound control, LATICRETE 170 Sound & Crack Isolation Mat is specifically designed to be used in conjunction with the DRYTEK Reinforcement Mat System.

Packaging4' x 37.5'2 (150 ft2), (1.2 m x 11.3 m) (13.7 m2) roll; 1 each or 20 rolls per pallet.

aPProxImaTe Coverage Per roll.

150 ft2 (13.7 m2)



dryTek® mvB moisture vapor BarrierDRYTEK MVB Moisture Vapor Barrier is a three component roller applied system made of special epoxies and fillers to ensure adhesion and bond strength. Designed specifically to reduce moisture vapor emission rate from concrete prior to floor covering installations.

Packaging3.5 gallons (13.2 l ) pail: 2 DRYTEK MVB Part A at 2.0 lb (0.9kg), 1 DRYTEK MVB Part B at 2.6 lb (1.2kg), 7 lb (3.2 kg) DRYTEK MVB Part C powder. 13.6 lb (6.2 kg) per unit.

aPProxImaTe Coverage 48 units per pallet.

180 –220 ft2 (16.7– 20.4 m2)


dryTek dm1 reinforcement matDRYTEK DM1 Reinforcement Mat is a mesh reinforcement bonded to a sheet comprised of polymeric fibers. Acting as both uncoupling and reinforcement, DRYTEK DM1 is part of the DRYTEK Reinforcement Mat System.

The system includes DRYTEK’s specially designed reinforcement mat encapsulated in a DRYTEK Self-Leveling Underlayment.

aPProxImaTe Coverage488 ft2 (45.2 m2) per 39" X 150' (990 mm x 45.7 m) roll,

8 rolls per pallet, 59 lbs (26.8 kg) per roll Refer to Data Sheet 050.0

new

Call 914-665-8864 Call 914-665-8864

Product Selector

Product 3000 4000 7200 7400 7600 7800 Skimcoat 8400 9400

Concrete*

Ceramic Tile

Quarry Tile

Wood

Vinyl

Radiant Heat

SUBSTRATE TyPE

* Includes poured in place, lightweight, cellular and concrete plank.NOTE: All DRYTEK self-leveling products except DRYTEK 7000 can be used over wood when reinforcement mesh is used. Consult your DRYTEK representative for details.

SUBSTRATE TYPE


Institutional (Schools, Hospitals)

Commercial (Offices)

Residential (Single family, Multi-family)

Light Industrial (Warehouses, Retail Outlets)

Heavy Industrial (Super Impact and Abrasion Resistance)

BUILDING TyPE

SUBSTRATE TYPE


Pumpable

Thickness 3/4”-2ft 1/8”-2” 1/8-1 1/4” 1/16”-1 1/4” 1/8”-2” 1/4”-4” 0”-3/8” 1/8”-1 1/2” 1/8”-1/2”

Hand-Applied

Underlayment

Wear Surface

Drying Time* (hours) 24 72 16 6 6 6 20-30 Min 30-40 Min 18

Fiber-Reinforced

Strength (psi) 6400** 3900 4350 6400 6400 5200 4100 4350 5800

CHARACTERISTICS

* Minimum time required prior to application of non-permable floor covering, such as sheet vinyl Drying time may vary according to jobsite conditions. Always perform site test prior to full-scale application.

** When capped with DRYTEK 7400.

7200 SAVES NATIONALRETAILER BIG BUCKS

WORLD RECORD SET AT ATLANTIC TERMINAL

Two bigs problems arose during the recent construction of a major new retail center in White Plains, NY. Not only were the new concrete floors unacceptable for finishes, they also had not dried out to acceptable levels for application of conventional cementitious toppings. With RH readings from 85%-94%, they had a 120,000sf mess on their hands.

Even if the owner applied an underlayment to correct the substrate condition, delays would still haunt them because application of floor covering would remain on hold until the moisture problem had abated. Once the underlayment contractor was selected engineers went to work on the moisture situation. Their initial solution was very costly and time consuming. It included the application of a separate moisture barrier prior to the application of a conventional Portland cement underlayment. This entire process would have cost them almost three times more per square foot than normal and require weeks to complete.

Fortunately DRYTEK® 7200 already had the solution inherent in the material. The unique properties of DRYTEK® underlayments create a barrier which permanently prevents the high PH of moist concrete from passing through it to the surface where it ordinarily would cause the failure of carpet and vct adhesives. Unlike conventional Portland based underlayments, DRYTEK® can be applied to moist concrete. Flooring finishes can then rapidly be applied to the DRYTEK®. It is that simple.

When I finally reached my destination, the installer greeted me, telling me their goal was to finish the entire store, 124,000 Sq. Ft., in just one day. I did not believe him. The pump started at 8:35 A.M. and continued running until 8:45 P.M

The substrate was burnished concrete with many hairline cracks throughout. The cleaning and priming was done the

day before. Using DRYTEK® 7800 would eliminate the need to shotblast and help bridge over the cracks because it was fiber-reinforced. It was a the perfect choice.

DRYTEK® 7800 started flying out of the hose as the men began spreading and smoothing the material. Conditions were ideal, substrate temperature was 62°, ambient temperature 68°. Production went on like this, all day, without a hitch. At the end of this historical day in Brooklyn, NY, the foreman and I sat and talked about how the DRYTEK®- product line would create greater opportunity for self-leveling products in the future. These products drastically reduce the amount of surface prep required and can also be applied to concrete with much higher moisture levels than other products allow.

Their forward thinking saved them in excess of $250,000, and weeks of delay in the opening of their new store! DRYTEK® has proven time and time again that value comes to our customers through our innovation and desire to solve their problems with the bottom line in mind.

VOLUME: 174 tons (6,336 bags) / COVERAGE: 124,000 Sq. Ft. / TIME: 12 HOURS 10 MINUTES

Call 914-665-8864 Call 914-665-8864

Scrapers

Brooms & shovels

Vacums

Dust Mask

Gloves

Garbage bags & Cans

Jobox

“ From a contractor’s perspective , Drytek provides, consistent , easy to use products, and you can’t beat the service -from both the Drytek Reps and the supply distributor.”

- Danny Harmer, President, Advanced Epoxy Flooring Systems

JIMMY BARATTADrytek Technical Consultant

“ Drytek products are low preparation products, which saves time and money on initial substrate prep. The products have an alkali barrier which protects against adhesive break down. The products are fast drying which means in most cases we can install finished flooring, next day. Drytek products are priced at or below industry standards which gives me the competitive edge I need during the bidding process.”

- Tom Leahy, Consolidated Carpets

“ We just started using Drytek products last year. I would never go back to any of the other products we’ve used previously. Why? One word, service!”

- Jeff Castaldo, President, Concrete Preparation Corp.

“ I would have not even put a Bid in for the Self-Leveling work at the Madison Square North Condominium Conversion Project / 15th Floor, if not for the support from start to finish from Drytek’s Technical Consultants Mike Lebo & Jim Baratta.”

- Michael Smithe, Smithe Construction

Expert On-Site Consultation Drytek is committed to your success. We have built a team of the best technical sales representatives in the industry to ensure your success. Drytek technical sales representatives work with you, architects, and distributors throughout every phase of the job, from initial consultation to the final finished floor application.

“ Besides the invaluable Technical Support I typically receive from Drytek, and the consistent performance I always get when installing Drytek 7000, mobilization was a key factor in getting and completing phase 1 at the MasterCard Project in Purchase, NY. Calling in the Drytek Material order the day before - a Friday, Celtic Building Supply was able to deliver the material the next morning on Saturday. Service like that is so valuable, and goes a long way!”

- Juan Carlos Guttierez, Main Carpet

Call 914-665-8864 Call 914-665-8864

Scrapers

Brooms & shovels

Vacums

Dust Mask

Gloves

Garbage bags & Cans

Jobox

UNDERLAyMENT

StyrofoamAdvantech Flooring Plywood

PL Adhesive

Hardi Backer Cement Board

Powers engineered products are manufactured to deliver consistent performance and cut labor costs. The products are recognized as conforming with the latest building codes and requirements.

Powers products cover the full traditional anchoring range while specializing in innovative products that provide the architect, engineer and end user with aesthetic, high performance, labor saving fastening solutions and fast technical advice.

LIGHT DUTyMEDIUM DUTyHEAvy DUTy

PINS 1/2” - 4”

PL Adhesive

Call 914-665-8864 Call 914-665-8864

Scrapers

Brooms & shovels

Vacums

Dust Mask

Gloves

Garbage bags & Cans

Jobox

PROTECTION

Homasote

Paper

Tapes

Masonite

Corex

Builder Board

Carpet Shield

Multi Applicator

Shoe Covers

Floor Shield

Pro Shield

Surface Shields, Inc. has specialized in custom coating

and converting pressure sensitive films since 1993. Our

high quality products, expertise in merchandising and

our commitment to service have made us the premier

provider to the Flooring, Building, Painting, RV, Moving,

Automotive, Hardware and retail markets.

Our foundation is built around a team of surface protec-

tion professionals who have extensive industry experi-

ence. Our team takes pride in a corporate culture that is

innovative, sincere, and fun. We welcome the opportunity

to solve even your toughest surface protection require-

ment.

OUR PRODUCTS, OUR MISSION

We offer a comprehensive line of surface protection and

dust containment items designed with professionals in

mind, yet convenient and easy enough for the do-it-your-

selfer to use. We strive to continually offer advancements

in our products and services to bring even more value to

our customers.

OUR GUARANTEE

Surface Shields, Inc. makes it quite simple. We believe the

quality of our products stand above the rest. Our guar-

antee is 100% customer satisfaction. If you are not fully

satisfied, we will gladly refund your full purchase price.

CALL 914 665 8864 TO SPEAK WITH A SURFACE SHIELD SPECIALIST

ABOUT YOUR PROTECTION NEEDS

Call 914 665 8864

Power and torque, that’s about all that needs to be said about the Hole-Hawg

line of drills. The compact design of this drill makes it perfect for drilling between

studs and joists. This unit will handle up to a 4-5/8 in. Selfeed Bit. An extra long

pipe handle helps you control the power. The 1675-6 features two speed ranges,

1200 and 300 rpm, this will greatly increase the versatility of this drill. Hi-torque

and hi-speed make this the perfect choice for the heavy duty user.

DRYTEK, MILWAUKEE. THE PERFECT MIX.

CALL CELTIC 914-665-8864

The Milwaukee 1675-6 Hole Hawg 7.5 Amp

flooring - celtic building supply

Documents