fl - institutional repository undip...
TRANSCRIPT
Judul Artikel llmiah
Penulis Artikel llmiah ldentitas Jurnal llmiah
LEMBAR
HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW
KARYA ILMIAH : JURNAL ILMIAH
Study the effect of ware rate on impingement failure of an acetabular liner surface based on finite element analysis Saputra E, Anwar IB, Van der Heide E, Ismail R, Jamari. J. a. Nama Jurnal : International Journal of Materials and PRoduct Technology b. Nomor/Volume/Hal : 4/55/340.c. Edisi {bulan/tahun) : -/2017 d. Penerbite. Jumlah halamanf. Ala mat web jurnal
: lnderscience : 14
http://www. i nderscience .com/i nfo/ina rticle. ph p ?a rtid=87033
§
Jurnal llmiah lnternasional Bereputasi Jurnal llmiah lnternasional Jurnal llmiah Nasional Terakreditasi Jurnal llmiah Nasional tidak Terakreditasi Jurnal llmiah Nasional Terindeks DOAJ dll.
1.Hasil Penilaian Peer Review:
Nilai Maksimal Jurnal llmiah (isikan di kolom yang sesuai)
Komponen Yang Dinilai
Kelengkapan dan Kesesuaian unsur isi jurnal (10%)
Ruang lingkup dan kedalaman pembahasan (30%)
Kecukupan dan kemutahiran data/ informasi dan metodologi (30%)
Kelengkapan unsur dan kualitas penerbit (30%)
Total = (100%)
lnternasional Bereputasi
4
12
12
12
40
NilaiPengusul {kontribusi pengusul penulis) = 40% x 38 / 4 = 3.8
KOMENTAR/!J�
lnternasional
•Kelengkapan dan �sesuaian Unsur
Le i(fu � �-) ,
Nasional Terakreditasi
•K.ecukupan & �emutakhiran Data & Metodologi {Turnitin similarit� indeks': 7%)
.1-h•,t-J\ �l/1 � � J)--VV"e_�
Nasional Tidak
Terakreditasi
Nasional Terindeks DOAJ dll.
Nilai Akhir Yang
Diperoleh
fl
Jl-
� �1 c� rv�
�� ft� ,�10/ )_�TLl-l.lA._ /)---i.--"I..
nit Kerja: Universitas Diponeg -o idang llmu: Teknik Mesin abatan/Pangkat: G r1.. Sse,2· I
2018
Kategori Publikasi Jurnal llmiah
(beri ✓ pada kategori yang tepat)
LEMBAR
HASIL PENILAIAN SEJAWAT SEBIDANG ATAU PEER REVIEW
KARYA ILMIAH : JURNAL ILMIAH
Judul Artikel llmiah Study the effect of wear rate on impingement failure of an acetabular liner surface based on
finite element analysis
Saputra, E., Anwar, I.B., Van Der Heide, E., Ismail, R., Jamari, J, Penulis Artikel llmiah
ldentitas Jurnal llmiah a. Nama Jurnal : International Journal of Materials and Product Technology
Kategori Publikasi Jurnal llmiah
(beri ✓ pada kategori yang tepat)
I.Hasil Penilaian Peer Review :
Komponen
Yang Dinilai
Kelengkapan dan Kesesuaian unsur
isi jurnal (10%)
Ruang lingkup dan kedalaman
pembahasan (30%)
Kecukupan dan kemutahiran data/
informasi dan metodologi (30%)
Kelengkapan unsur dan kualitas
penerbit (30%)
Total = (100%)
b. Nomor/Volume/Hal : 4/55/340-353
c. Edisi (bulan/tahun) : ........ ./2017
d. Penerbit
e. Jumlah halaman
f. Alamat web jurnal
: lnderscience
:14
htt ://www.inderscience.com/info/inarticle.php ?artid=87033
✓ Jurnal llmiah lnternasional Bereputasi
Jurnal llmiah lnternasional
Jurnal tlmiah Nasional Terakreditasi
Jurnal tlmiah Nasional tidak Terakreditasi
Jurnal llmiah Nasional Terindeks DOAJ dll.
Nilai Maksimal Jurnal llmiah (isikan di kolom yang sesuai)
lnternasional
Bereputasi
4
12
12
12
40
lntemasional Nasional
Terakreditasi
Nasional
Tidak
Terakreditasi
Nilai Pengusul (kontribusi pengusul penulis kelima) = (40% x 36)/4
KQ
•Kelengkapan dan Kesesuaian Unsur
Nasional
Terindeks
DOAJ dll.
Nilai
Akhir
Yang
Diperoleh
4
11
10
11
36
Tulisan sudah lengkap sesuai template International Journal of Materials and Product Technology pada saat itu yaitu terdiri
dari judul, abstrak, pendahuluan, metode, pembahasan, kesimpulan, ucapan terima kasih, dan referensi. Artikel telah sesuai
bidang ilmu pengusul/anggota penulis.
•Ruang Lingkup dan Kedalaman Pembahasan
lsi artikel berkaitan dengan pengaruh tingkat keausan pada kegagalan menimpa permukaan liner acetabular berdasarkan
analisis elemen hingga. Metode dan data hasil penelitian cukup banyak, namun pola pembahasan ditingkatkan lagi dengan
mensitasi referensi yang digunakan secara lebih banyak lagi paling tidak 50% dari referensi yang digunakan
•Kecukupan & Kemutakhiran Data & Metodologi
Artikel ini memiliki nilai kebaharuan yang sedang. Sebanyak 5 dari 13 referensi yang digunakan lebih dari 10 tahun terakhir.
Kemutakhiran informasi cukup baik. Turnitin similarity index= 7 %
•Kelengkapan Unsur & Kualitas Penerbit
Jurnal ini tergolongjurnal lnternasional terindeks scopus dan bereputasi dengan IF: 0.23 pada saat penerbitan tulisan ini.Semarang, 6 September 2018
Unit Kerja : Universi s Diponegoro
Bidang llmu : Tek · Kimia
Jabatan/Pangkat : Guru Besar
Scopus
Document details
71 of 139
Study the effect of wear rate on impingement failure of an acetabular linersurface based on finite element analysis (Article)
, , , ,
Laboratory for Surface Technology and Tribology, Faculty of Engineering Technology, University of TwenteDrienerloolaan 5, P.O. Box 217, Enschede, 7500 AE, NetherlandsLaboratory for Engineering Design and Tribology, Department of Mechanical Engineering, Diponegoro University, Jl.
Prof. Soedharto SH, Tembalang, Semarang, 50275, Indonesia
AbstractIn this study, correlation of wear inside of an acetabular liner surface (ALS) and damage on an acetabular liner rim(ALR) due to impingement effect are investigated. The analysis included evaluation of the macrostructure of thedamage based on visual investigation and computer simulation analysis. A commercial finite element methodABAQUS software package is used to simulate local impingement on the ALR due to wear depth variations (wear rates)inside the ALS. Here, the wear depth is based on the data of wear experiment from literature. The von Mises stressand contact deformation on the ALR at impingement is presented. In addition, the initial impingement angle is alsopresented to show the correlation between the wear inside of the ALS and the angle of impingement occurrence. Theresults show that the existence of wear inside of the ALS can increase the damage of the ALR due to impingementeffect. Copyright © 2017 Inderscience Enterprises Ltd.
SciVal Topic Prominence
Topic:
Prominence percentile: 95.132
Author keywordsAcetabular liner Finite element analysis Impingement Wear rate
Indexed keywords
Engineeringcontrolled terms:
ABAQUS Wear of materials
Engineeringuncontrolled terms
Acetabular liners Contact deformation Impingement Impingement angle
Impingement effect Visual investigation Von Mises stress Wear rates
Engineering mainheading:
Finite element method
◅ Back to results ◅ Previous ▻Next
Export Download Print E-mail Save to PDF ⋆ Add to List ▻More...
View at Publisher
International Journal of Materials and Product TechnologyVolume 55, Issue 4, 2017, Pages 340-353
Saputra, E.a Anwar, I.B.a van der Heide, E.a Ismail, R.b Jamari, J.b
a
b
View references (14)
Hip | Arthroplasty | Cup anteversion
ISSN: 02681900CODEN: IJMTESource Type: JournalOriginal language: English
DOI: 10.1504/IJMPT.2017.087033Document Type: ArticlePublisher: Inderscience Enterprises Ltd.
PlumX MetricsUsage, Captures, Mentions,Social Media and Citationsbeyond Scopus.
Metrics
Cited by 0 documents
Inform me when this documentis cited in Scopus:
Related documents
, ,
(2016) AIP ConferenceProceedings
, ,
(2017) Key Engineering Materials
, ,
(2016) AIP ConferenceProceedings
Find more related documents inScopus based on:
Set citation alert ▻
▻Set citation feed
Finite element analysis of theimpingement on the acetabularliner rim due to wear of theacetabular liner surface
Saputra, E. Anwar, I.B. Ismail,R.
Study of unipolar and bipolar hipprostheses using finite elementsimulation: Contact stressanalysis
Saputra, E. Anwar, I.B. Ismail,R.
Finite element study of contactpressure distribution on innerand outer liner in the bipolar hipprosthesis
Saputra, E. Anwar, I.B. Ismail,R.
View all related documents basedon references
▻Authors ▻Keywords
References (14)
(2012) ABAQUS Documentation. .ABAQUS ( Dassault Systèmes, Providence, RI, USA
Cuckler, J.M.
(2011) Seminars in Arthroplasty, 22 (2), pp. 98-99. .doi: 10.1053/j.sart.2011.03.012
Dowson, D., Jobbins, B., Seyed-Harraf, A.
(1993) Wear, 162-164 (PART B), pp. 880-889. .doi: 10.1016/0043-1648(93)90090-9
Faulkner, A., Arnell, R.D.
(2000) Wear, 242 (1-2), pp. 114-122. .doi: 10.1016/S0043-1648(00)00406-3
Hummel, M.T., Malkani, A.L., Yakkanti, M.R., Baker, D.L.
(2009) Journal of Arthroplasty, 24 (6 SUPPL.), pp. 73-76. .doi: 10.1016/j.arth.2009.04.026
Jamari, J., Ismail, R., Saputra, E., Sugiyanto, S., Anwar, I.B.
(2014) Advanced Materials Research, 896, pp. 272-275. .ISBN: 978-303835031-6doi: 10.4028/www.scientific.net/AMR.896.272
Kurtz, S.M., Pruitt, L., Jewett, C.W., Crawford, R.P., Crane, D.J., Edidin, A.A.
(1998) Biomaterials, 19 (21), pp. 1989-2003. .
doi: 10.1016/S0142-9612(98)00112-4
▻View in search results format
All Export Print E-mail Save to PDF Create bibliography
1 Cited 185 times
2
The Dislocated Total Hip: The Dreaded 3 AM Phone Call
Cited 9 times
View at Publisher
3
An evaluation of the penetration of ceramic femoral heads into polyethylene acetabularcups
Cited 37 times
View at Publisher
4
The development of a finite element model to simulate the sliding interaction betweentwo, three-dimensional, elastoplastic, hemispherical asperities
Cited 52 times
View at Publisher
5
Decreased Dislocation After Revision Total Hip Arthroplasty Using Larger FemoralHead Size and Posterior Capsular Repair
Cited 55 times
View at Publisher
6
The effect of repeated impingement on UHMWPE material in artificial hip joint duringsalat activities
Cited 14 times
View at Publisher
7
The yielding, plastic flow, and fracture behavior of ultra-high molecular weightpolyethylene used in total joint replacements
Cited 120 timeshttp://www.journals.elsevier.com/biomaterials/
View at Publisher
McNie, C., Barton, D.C., Stone, M.H., Fisher, J.
(1998) Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering inMedicine, 212 (1), pp. 49-56. .
doi: 10.1243/0954411981533818
Saputra, E., Budiwan Anwar, I., Ismail, R., Jamari, J., van der Heide, E.
(Open Access)
(2014) Jurnal Teknologi (Sciences and Engineering), 66 (3), pp. 53-58. .
doi: 10.11113/jt.v66.2694
Saputra, E., Anwar, I.B., Jamari, J., Van Der Heide, E.
(Open Access)
(2013) Procedia Engineering, 68, pp. 102-108. .
doi: 10.1016/j.proeng.2013.12.154
Scifert, C.F., Brown, T.D., Pedersen, D.R., Callaghan, J.J.
(1998) Clinical Orthopaedics and Related Research, (355), pp. 152-162. .
doi: 10.1097/00003086-199810000-00016
Sikes, C.V., Lai, L.P., Schreiber, M., Mont, M.A., Jinnah, R.H., Seyler, T.M.
(2008) Journal of Arthroplasty, 23 (7 SUPPL.), pp. 59-63. .doi: 10.1016/j.arth.2008.06.032
Sugano, N., Tsuda, K., Miki, H., Takao, M., Suzuki, N., Nakamura, N.
(2012) Journal of Arthroplasty, 27 (8), pp. 1562-1568. .doi: 10.1016/j.arth.2012.01.029
Tanino, H., Harman, M.K., Banks, S.A., Hodge, W.A.
(Open Access)
(2007) Journal of Orthopaedic Research, 25 (11), pp. 1401-1407. .doi: 10.1002/jor.20410
8
Prediction of plastic strains in ultra-high molecular weight polyethylene due tomicroscopic asperity interactions during sliding wear
Cited 18 timeshttp://pih.sagepub.com/content/by/year
View at Publisher
9
Numerical simulation of artificical hip joint movement for western and Japanese-styleactivities
Cited 11 timeshttp://www.jurnalteknologi.utm.my/index.php/jurnalteknologi/article/view/2694/2029
View at Publisher
10
Finite element analysis of artificial hip joint movement during human activities
Cited 16 timeshttp://www.sciencedirect.com/science/journal/18777058
View at Publisher
11
A finite element analysis of factors influencing total hip dislocation
Cited 114 timeshttps://journals.lww.com/clinorthop/pages/default.aspx
View at Publisher
12
Instability After Total Hip Arthroplasty. Treatment with Large Femoral Heads vsConstrained Liners
Cited 73 times
View at Publisher
13
Dynamic Measurements of Hip Movement in Deep Bending Activities After Total HipArthroplasty Using a 4-Dimensional Motion Analysis System
Cited 37 times
View at Publisher
14
Association between dislocation, impingement, and articular geometry in retrievedacetabular polyethylene cups
Cited 16 times
View at Publisher
71 of 139
Saputra, E.; Laboratory for Surface Technology and Tribology, Faculty of Engineering Technology, University ofTwente Drienerloolaan 5, P.O. Box 217, Enschede, Netherlands; email: © Copyright 2017 Elsevier B.V., All rights reserved.
◅ Back to results ◅ Previous ▻Next Top of page
About Scopus
What is Scopus
Content coverage
Scopus blog
Scopus API
Privacy matters
Language
⽇本語に切り替える切换到简体中文
切換到繁體中文
Русский язык
Customer Service
Help
Contact us
Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.
We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the.
↗Terms and conditions ↗Privacy policy
↗Elsevier B.V
use of cookies
Scopus
Source details
International Journal of Materials and Product TechnologyScopus coverage years: from 1986 to PresentPublisher: InderscienceISSN: 0268-1900 E-ISSN: 1741-5209Subject area: Engineering: Industrial and Manufacturing Engineering Engineering: Safety, Risk, Reliability and Quality
Engineering: Mechanical Engineering Engineering: Mechanics of Materials
View all documents ▻ Set document alert Journal Homepage
CiteScore 2018
0.86
SJR 2018
0.238
SNIP 2018
0.692
CiteScore CiteScore rank & trend CiteScore presets Scopus content coverage
Calculated using data from 30 April, 2019CiteScore
*CiteScore includes all available document types
0.86 =
Citation Count 2018
Documents 2015 -2017*
=
Metrics displaying this icon are compiled according to , a collaboration betweenindustry and academia.
2018
▻130 Citations
▻151 Documents
▻View CiteScore methodology ▻CiteScore FAQ
Last updated on 08 July, 2019CiteScoreTracker 2019
0.39 = Citation Count 2019
Documents 2016 - 2018 =
Updated monthly
▻53 Citations to date
▻137 Documents to date
↗ Snowball Metrics
CiteScore rank
Category Rank Percentile
Engineering #157/323 51st
Engineering #85/154 45th
IndustrialandManufacturingEngineering
Safety,Risk,Reliability
▻View CiteScore trends
🔗Add CiteScore to your site
About Scopus
What is Scopus
Content coverage
Scopus blog
Scopus API
Privacy matters
Language
⽇本語に切り替える切换到简体中文
切換到繁體中文
Русский язык
Customer Service
Help
Contact us
Copyright © . All rights reserved. Scopus® is a registered trademark of Elsevier B.V.
We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the.
↗Terms and conditions ↗Privacy policy
↗Elsevier B.V
use of cookies
8/5/2019 editor-in-chief-m-a-dorgham-inderscience-publishers.jpg (452×640)
https://img.yumpu.com/22653612/1/500x640/editor-in-chief-m-a-dorgham-inderscience-publishers.jpg 1/1
8/5/2019 International Journal of Materials and Product Technology (IJMPT) Inderscience Publishers - linking academia, business and industry through research
https://www.inderscience.com/jhome.php?jcode=ijmpt#edboard-content 1/2
Help SitemapLog in
Home > International Journal of Materials and Product Technology
International Journal of Materials andProduct Technology
This journal also publishes Open Access articles
IJMPT is a refereed and authoritative publication which provides a forum for theexchange of information and ideas between materials academics and engineersworking in university research departments and research institutes, andmanufacturing, marketing and process managers, designers, technologists andresearch and development engineers working in industry.
Editor in ChiefDr. M.A. Dorgham
ISSN online1741-5209
ISSN print0268-1900
8 issues per yearSubscription price
Impact factor (Clarivate Analytics) 20190.674 (5-Year Impact Factor 0.693)
About this journal Editorial board Submitting articles
Editor in ChiefDorgham, M.A., International Centre for Technology and Management, UK(editorial inderscience.com)
Associate EditorEyerer, Peter, Fraunhofer Institut für Chemische Technologie (ICT), Germany
American EditorKarbhari, Vistasp M., University of Texas at Arlington, USA
Japanese EditorKobayashi, Toshiro, Toyohashi University of Technology, Japan
Editorial Board MembersAstrorn, Thomas, Royal Institute of Technology, SwedenBeardmore, Peter, Ford Motor Co, USABesterci, Michal, Slovak Academy of Sciences, SlovakiaCastro, P., Universidade Federal Fluminense, BrazilChampagne, Blaise, Industrial Materials Research Institute, CanadaCorso, S., Fiat Auto Spa, ItalyEvans, A.G., University of California, Santa Barbara, USAGabbert, U., Otto-von-Guericke-Universität Magdeburg, USAGillespie, Jr., John W., University of Delaware, USA
•
•
•
•
•••••••••
Sign up for new issue alerts
Subscribe/buy articles/issues
View sample issue
Latest issue contents as RSS feed
Forthcoming articles
Journal information in easy print format(PDF)
Publishing with Inderscience:ethical guidelines (PDF)
View all calls for papers
Recommend to a librarian (PDF)
Feedback to Editor
Find related journals
Keep up-to-date
Our Blog
Follow us on Twitter
Visit us on Facebook
Our Newsletter (subscribe for free)
RSS Feeds
New issue alerts
8/5/2019 International Journal of Materials and Product Technology (IJMPT) Inderscience Publishers - linking academia, business and industry through research
https://www.inderscience.com/jhome.php?jcode=ijmpt#edboard-content 2/2
Contact us About Inderscience OAI Repository Privacy and Cookies Statement Terms and Conditions Help Sitemap
© 2019 Inderscience Enterprises Ltd.
Grum, Janez, University of Ljubljana, SloveniaInoue, Akihisa, University of Tohoku, JapanKagawa, Yutaka, The University of Tokyo, JapanKageyama, Kazuro, University of Tokyo, JapanKedward, K.T., University of California-Santa Barbara, USALin, Jianguo, Imperial College, UKNagai, Kotobu, National Institute for Material Science, JapanNefedov, OIeg M, National Committee of Russian Chemists, Russian FederationNoori, Mohammad, California Polytechnic State University, USAOchiai, Shojiro, Kyoto University, JapanPing, Yang, Jiangsu University, ChinaPlumtree, A., University of Waterloo, CanadaQuinlivan, John, Boeing Commercial Airplane Co., USARudnev, Valery, INDUCTOHEAT, USASpringer, George S., Stanford University, USAStarke, Jr, Edgar A., University of Virginia, USASubbarao, E.C., Tata Research Development and Design Centre, IndiaTalreja, Ramesh, Texas A&M University, USATotten, George E., G.E. Totten & Associates, Inc., and Portland State University, USAVilar, Rui, Instituto Superior Técnico, PortugalVoggenreiter, Heinz, EADS, FranceWagner, Lothar, Brandenburgische Technische Universität Cottbus, GermanyWang, Fuhui, State Key Laboratory for Corrosion and Protection Institute of MetalResearch, ChinaWilliams, J.C., GE Engineering Materials Technology Labs, USAWu, Zhishen, Ibaraki University, Japan and Southeast University, ChinaYonezu, Hiroo, Toyohashi University of Technology, Japan
•••••••••••••••••••••••
•••
Return to top
8/5/2019 International Journal of Materials and Product Technology (IJMPT) Inderscience Publishers - linking academia, business and industry through research
https://www.inderscience.com/info/inarticletoc.php?jcode=ijmpt&year=2017&vol=55&issue=4 1/2
Contact us About Inderscience OAI Repository Privacy and Cookies Statement Terms and Conditions Help Sitemap
© 2019 Inderscience Enterprises Ltd.
Help SitemapLog in
International Journal of Materials and Product Technology > Published issues > 2017 Vol.55 No.4
International Journal of Materials andProduct Technology2017 Vol.55 No.4
Pages Title and author(s)
319-330 Influence of TEOS concentration and Triton additive on the nanostructuresilica sol-gel anti-reflective coatingsShahrokh Ahangarani; Najme Lari; Ali ShanaghiDOI: 10.1504/IJMPT.2017.10007217
331-339 Volume combustion and mechanochemical syntheses of LaBBaris Akgün; Naci Sevinç; H. Erdem Çamurlu; Yavuz TopkayaDOI: 10.1504/IJMPT.2017.10007219
340-353 Study the effect of wear rate on impingement failure of an acetabular linersurface based on finite element analysisEko Saputra; Iwan Budiwan Anwar; Emile Van Der Heide; Rifky Ismail; J. JamariDOI: 10.1504/IJMPT.2017.10007222
354-367 Effect of applied electric field on the chemical structure and thermaldiffusion of DLC film irradiated by laserShenjiang Wu; Junhong Su; Junqi Xu; Jinman Ge; Dangjuan Li; Xiaoyan Shang;Guixia WangDOI: 10.1504/IJMPT.2017.10007228
368-380 Absorption of methylbenzene in 1-butyl-3-methylimidazolium ionic liquidsZidan Chen; Lei Yu; Dandan Zhang; Kun Yang; Erhong DuanDOI: 10.1504/IJMPT.2017.10007229
381-391 Shear crack in 1-D hexagonal quasicrystalline half-spaceG.E. TupholmeDOI: 10.1504/IJMPT.2017.10007231
392-409 Design and optimisation of micro forging system to reduce parasiticmotionChangho Jung; Byung-Joo Choi; Hyunho Yeom; Moon Gu Lee; Yongho JeonDOI: 10.1504/IJMPT.2018.10004154
6
Sign up for new issue alerts
Subscribe/buy articles/issues
View sample issue
Latest issue contents as RSS feed
Forthcoming articles
Journal information in easy print format(PDF)
Publishing with Inderscience:ethical guidelines (PDF)
View all calls for papers
Recommend to a librarian (PDF)
Feedback to Editor
Find related journals
Keep up-to-date
Our Blog
Follow us on Twitter
Visit us on Facebook
Our Newsletter (subscribe for free)
RSS Feeds
New issue alerts
Return to top