Hilco Industrial, LLC

WebCast/OnsIte auCtIOnFinal Sale – Complete Plant Wind Down of New Process Gear, Division of

FinaL SaLe in a SeRieS OF aUCTiOnS

Over 3,000 Lots!

A u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

Hilco Industrial, LLC

www.hilcoind.com

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Connecticut • Dallas • Detroit • Grand Rapids

Guadalajara (MX) • Hong Kong (Greater China) • Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX)

Monterrey (MX) • New York • San Francisco • Singapore • Thailand • Toronto • Villahermosa (MX)

to schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)2

dIreCtIOnsFrOm FrOm syraCuse InternatIOnaL aIrpOrt (syr): FOLLOW exIt tO I-81 sOutHbOund (tOWards I-90/tHruWay). traveL sOutH On I-81 apprOx2 mILes tO I-90 e (ny state tHruWay). traveL east On I-90 FOr apprOx 4 mILes tO rte 298 (exIt 35). exIt I-90 tHruWay and FOLLOW rOundabOutFOr rte 298 east. traveL east On rte 298 FOr 1 mILe tO neW venturegear rd. make sLIgHt rIgHt OntO neW venture gear rd and traveL ¾ mILe tO pLant On rIgHt. WatCH FOr auCtIOn sIgns and enter FaCILI-ty at guard sHaCk.

FurtHer InFOrmatIOn• a buyers premIum OF 13.5% FOr aLL OnsIte saLes & 16% FOr aLL WebCast

saLes WILL be In eFFeCt. auCtIOn WILL be COnduCted In engLIsH, aCCept-Ing u.s. CurrenCy OnLy.

• REMOVAL DEADLINE Is NOVEMbER 16 WITH HOURs OF REMOVAL bETWEEN 7AM TO5PM MONDAY THRU FRIDAY AND 7AM TO 3PM sATURDAY. AssETs LEFT ON sITEAFTER DEADLINE WILL bE DEEMED AbANDONED.

• nOte: aLL peOpLe attendIng prevIeW and saLe days must WatCH magnasaFety vIdeO beFOre enterIng manuFaCturIng pLant – pLease aLLOWaddItIOnaL tIme FOr vIeWIng vIdeO. aLL partICIpants must regIster andFOLLOW aLL magna saFety guIdeLInes tO enter pLant.

• CHeCk Our WebsIte WWW.HILCOInd.COm FOr addItIOns tO saLe.

• FOr FurtHer InFOrmatIOn On maCHInery & eQuIpment, pLease COntaCt ken pLanet at 248-254-9999 x33 Or emaIL kpLanet@HILCOInd.COm

• FOr payments pLease COntaCt LesIa JOsepH at 616-732-1800 x19 Or emaILLJOsepH@HILCOInd.COm Or HILCO aCCOunts reCeIvabLe atHIn_ar@HILCOInd.COm

• FOr CustOmer servICe, pLease COntaCt sandI neeLy at 248-254-9999 x16 OremaIL sneeLy@HILCOInd.COm

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any

date, sale process, terms and conditions and list of available assets.

auCtIOn datestuesday & Wednesday,september 18tH - 19tH

begInnIng at 9am LOCaL tIme

prevIeW dates

FrIday, september 14tH and

mOnday, september 17tH

8am tO 4pm LOCaL & mOrnIng OF saLeFor earlier iNSPeCtioN, PleaSe CoNtaCt keN PlaNet at 248-254-9999 x33 or email kPlaNet@hilCoiND.Com

auCtIOn & prevIeW LOCatIOn6600 neW venture gear dreast syraCuse, ny 13057

HOteLs

HILtOn garden Inn...........315-431-4800

HamptOn Inn......................315-565-2455

QuaLIty Inn.........................315-432-9333

by order of

WebCast/OnsIte auCtIOnHILCO IndustrIaL, LLC

(7) SPLine ROLLeRS4 – ANDERSON COOK MODEL 350S 48” MARAND SPLINE ROLLERS, S/Ns 498, 360, 286 & 231; Allen Bradley Panel view & Data Liner Terminal, Underarm Unit

2 – ANDERSON COOK MODEL 3251 48" SPLINE ROLLERS, S/Ns 4629 & 4267, Michigan Tool Company / Rebuilt by Anderson Cook, Overarm, 40 HP Motor & Hydraulic Unit

1 – ANDERSON COOK MODEL 3237 36" SPLINE ROLLER, S/N 4429, Michigan Division Rebuild, Allen Bradley Panel view 550 Terminal, Underarm Unit

4 – TAURUS TOOL & ENG MODEL SHT SPLINE PRESSES

Partial Listing Only – Please Visit Our Website for Full Listing and Current Updates

www.hilcoind.com

assets to be Sold – Day 1 assets to be Sold – Day 2Spline Rollers, Gear Equipment – Hobbers/Cutters/Shavers, Gear Analyzers, CNC TurningCenters, CNC Horizontal Machining Centers, CNC Robots, Knuckle Joint Press, CNCGrinders, Broaches, Washers, Replacement Parts, Electronics Components, Plant Support

CNC Tool & Cutter Grinders, Gear Shaver Cutters, Inspection, LaboratoryEquipment, Tool Room, Fabricating Equipment, Heat Treat, Welders, ToolCoating, Shot Blast & Finishing, Rolling Stock, Bearings, Plant Support

For more information, please visit us on the web at www.hilcoind.com 3

spLIne rOLLers • CnC gear HObbers, pOInters & sHaver CuttersWebCast/OnsIte auCtIOn(8) CnC GeaR HOBBeRS7 – PHOENIX GLEASON MODEL 125GH 6-AXIS CNC GEAR HOBBERS, S/Ns 912605, 909303,

910708, 910806, 910805, 910802, 910804, (late as 1996), Fanuc Series 150M Control,Automatic Parts Feed Carousel

1 – GLEASON MODEL 782 CNC/ 125GH 4-AXIS CNC GEAR HOBBER, S/N 915801 (1999), GEFanuc 15M Control, Parts Load/Unload Carousel, 5 HP External Oil gear Hydraulic Unit, AbsolentODF2000 Mist Collector

Large Quantity of Cutter Bodies - Gleason & Samputensil; Large Quantity of Hobs

(10) CnC GeaR POinTeRS2 – WERA MODEL DRS 2000 CNC GEAR POINTERS, S/Ns 4079593, 4076994 (1995), Siemens

Sinumerik Controls, Horizontal Workpiece Spindle, (2) Universal Pointer Spindles, Carousel TypeParts Feeder

1 – WERA PROFILATOR MODEL DRS200-CNC CNC GEAR POINTER, S/N 4063989 (1989),Siemens Sinumerik CNC Control, Two Universal Pointer Spindles, Horizontal Workpiece Spindle

3 – WERA PROFILATOR MODEL DRS200 GEAR POINTERS, S/Ns 4049286, 4049186, 4049086(1989), Two Universal Pointer Spindles, Horizontal Workpiece Spindle

4 – WERA MODEL DRT 150 CNC GEAR POINTERS, S/Ns 4096698, 4084095, 4083294,4080594, (late as 1998), Siemens Sinumerik Controls, Horizontal Workpiece Spindle, (2)Universal Pointer Spindles

1 – ITW HEARTLAND MODEL 3500-1 PORTABLE GEAR ROLLING INSTRUMENT, S/N 1691R,Operator's Monitor

CnC GeaR SHaPeRS1 – FELLOWS MODEL 10-2 CNC GEAR SHAPER, S/N N/A, Workpiece Chuck

14" Diameter, 3 HP Motor & Hydraulic Unit1 – FELLOWS MODEL 10-4 CNC GEAR SHAPER, S/N 34852, Max External & Internal Pitch

Diameter 10", Spindle Diameter 3.543", 5 HP Motor

(17) GeaR SHaVeRS1 – RED RING MODEL GCU GEAR

SHAVER, S/N GCU-3063, Tailstock

15 – CHURCHILL MODEL GS-12 & GS-12AGEAR SHAVERS

1 – EXCELLO / KENT OWENS H-12 GEARSHAVER, S/N 430-049 & 430-048,Reliance Electro Craft Servo Drive, Holder& Tailstock

CnC GeaR SHaVeR CUTTeRS1 – MITSUBISHI MODEL ZA30CNC 9-AXIS

CNC GEAR SHAVING CUTTER GRINDER,S/N 30117 (1995), Fanuc 16-M Control, ODMax 760 mm, Wheel Width 32 mm

1 – HURTH MODEL SRS-402 GEARSHAVER CUTTER GRINDER, S/N 21769(1980), Max Diameter 15.75", Heidenhain3-Axis DRO, Wheel Dresser

CnC GeaR SHaVinG1 – MITSUBISHI MODEL FA30CNC 4-AXIS

CNC GEAR SHAVING MACHINE, S/NG1408C4 (1994), Mitsubishi FanucControl, Connected to CentralizedCoolant/Chip System

PaRTS inVenTORY in eXCeSS OF $10,000,000See page 11 for details.

CnC turnIng Centers • CnC CHuCkers • CnC HOrIzOntaL maCHInIng Centers

to schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)4

(9) CnC HORiZOnTaL MaCHininG CenTeRS

(31) CnC TURninG CenTeRS & (5) CnC CHUCKeRS2 – OKUMA MODEL LU 25 IMPACT 4-AXIS CNC TURNING CENTERS, S/Ns 0058 & 0057 (1994),

OSP 7000 Control, Bar Capacity 3.5", Swing Over Bed 22", Turning Diameter 16.8" Max, TurningLength 25.59" Max, Programmable Tailstock, 12 Position (Upper) & 8 Position (Lower) Turrets

6 – OKUMA MODEL LU-15 4-AXIS CNC TURNING CENTERS, S/Ns 0685, 1065, 1051, 0173,0172, N/A, (late as 1999), Okuma OSP 7000 & OSP U100L Control, Swing Over Bed 20.9",Center Distance 23.6", Programmable Tailstock, 12 Position (Upper) & 8 Position (Lower) Turret,Some w/Chip Conveyors

2 – OKUMA MODEL LU-15 IMPACT 4-AXIS CNC TURNING CENTERS, S/Ns 0106 & 0099 (1995),Okuma OSP 5020L Control, Swing Over Bed 20.9", Center Distance 23.6", ProgrammableTailstock, 12 Position (Upper) & 8 Position (Lower) Turret

1 – OKUMA MODEL LC-20 4-AXIS CNC TURNING CENTER, S/N 4132, Okuma OSP 5000 L-6CNC Control

4 – OKUMA MODEL LNC-8 2-AXIS CNC TURNING CENTERS, S/Ns D452, D376, D367 & D165;OSP 5020L Control, Turning Diameter 10" Approx, Turning Length 20" Max Approx,Programmable Tailstock, 12 Station Turret, Turbo Model 6475-8010 Chip Conveyor

4 – OKUMA MODEL LR-15 4-AXIS CNC TURNING CENTERS, S/Ns 2017, 0865, 0863, & 0683(late as 1994); Okuma OSP 5020L & OSP5000L-G Control, 10 Position (Upper) & 8 Position(Lower) Turrets, Swing Over Bed 17.72", Swing Over Saddle 11.81", Tailstock; One w/Turbo ChipConveyor

3 – OKUMA MODEL LB 15 2-AXIS CNC TURNING CENTERS, S/Ns 9600, 9749, 9828; OSP 5020LControl, Max Swing Over Bed 15.75", Max Turning Length 19.69", Programmable Tailstock, 12 Position Turret

1 – MORI SEIKI MODEL ZL-25A 4-AXIS CNC TURNING CENTER, S/N 654 (1995), Mori Seiki MSD-516 Control, Bar Capacity 2.8", Turning Diameter 10.2" Max, Turning Length 20.87" Max,Programmable Tailstock, 12 Position (Upper) & 8 Position (Lower) Turrets

4 – CINCINNATI MILACRON MODEL AVENGER 200T 2-AXIS CNC TURNING CENTERS, S/Ns3650 AOT94-0239, 0238, 3650 AOT93-0091, & 0100 (1995), Acramatic 850 SX Control, BarCapacity 2" Diameter, Swing 17", Centers 30", Programmable Tailstock, 12 Position Turret

2 – OKUMA MODEL LR-15 2-AXIS CNC CHUCKERS, S/Ns 1999, 1997 (late as 1995), Okuma OSPControl, 10 Position Turret, Swing Over Bed 17.72", Swing Over Saddle 11.81"

3 – OKUMA MODEL LB15-2 2-AXIS CNC CHUCKERS, S/Ns 1729, 1731, 1732 (1994), Okuma OSP7000 Control, Swing Over Bed 15.75", Cutting Length 19.69" Max, 12 Position Turret

2 – NEW BRITAIN (SMS REBUILD) MODEL N66-CNC REBUILD 2-AXIS CNC VERTICALLATHES, S/Ns 50721-6/98 & 50720-6/98, Allen Bradley 9 Series CNC Control, Dual Chuck, DualCutter Heads

2 – SAGINAW MACHINE MODEL N50-2 DUAL SPINDLE CNC TURNING CENTERS, S/Ns 79128-3/93 & 79127-3/93 (1993), GE Fanuc O-TT Control, Dual Duplomatic 8-Station Turrets

7 – MITSUBISHI MODEL MH5A 4-AXIS CNC HORIZONTAL MACHINING CENTERS, S/NsH5A088, H5A087, H5A071, H5A063, H5A061,H5A059, H5A056 (1995), Mitsubishi Control,Dual Pallets19.7" x 19.7", Travels: X – 28.6", Y – 24.5", Z – 23.6", Spindle RPM 10,000; Full4th Axis – 360,000° Positioning; 60 Position ATC – 50 Taper, Mayfran Chip Conveyor

2 – CINCINNATI MILACRON MODEL MAXIM 5004-AXIS CNC HORIZONTAL MACHINING CENTERS, S/Ns 3631B0194-004 & 002 (1994),Siemens Acramatic 950 Control, Dual Pallets19.5" x 19.5", Travels: X – 29.5", Y – 27.6", Z – 29.5"; Spindle RPM 7000 Max, ATC – 50Taper, Turbo Model 6475.8622 Chip Conveyor

CnC tOOL & Cutter grInders • CnC rObOts • CnC grInders • press

For more information, please visit us on the web at www.hilcoind.com 5

2006

(8) CnC TOOL & CUTTeR GRinDeRS1 – STAR MODEL UTG1800 5-AXIS CNC UNIVERSAL TOOL GRINDER, S/N 1230 (1995),

CNC Control, Workpiece Centers Max 102", Workpiece Diameter .12" – 4", Travels: X –13.4", Y – 9.43", Z – 81.9", A – 360° Max, B – 90° Max, Spindle RPM 14,400

1 – STAR MODEL UTG1200 5-AXIS CNC UNIVERSAL TOOL GRINDER, S/N 1025 (1995),GE Fanuc 15-M Control, Workpiece Centers Max 79", Workpiece Diameter .12" – 4",Travels: X – 13.4", Y – 9.43", Z – 58.3", A – 360° Max, B – 90° Max

1 – STAR MODEL UTG600 5-AXIS CNC UNIVERSAL TOOL GRINDER, S/N 3578 (1999),Fanuc Control, Workpiece Centers Max 43", Workpiece Diameter .12" – 4", Travels: X – 13.4", Y – 9.43", Z – 34.6", A – 360° Max, B – 90° Max

2 – STAR MODEL UTG600 5-AXIS CNC UNIVERSAL TOOL GRINDERS, S/Ns 1127 &1126 (1995), Fanuc 15-M Control, Workpiece Centers Max 43", Workpiece Diameter.12" – 4", Travels: X – 13.4", Y – 9.43", Z – 34.6", A – 360° Max, B – 90° Max

1 – STAR MODEL ATG-6AC 6-AXIS CNC TOOL GRINDER, S/N 3198 (1996), GE Fanuc15-M CNC Control, Workpiece Centers Max 27", Workpiece Diameter .12" – 4", Travels:W – 3", X – 8.4", Y – 4.6", Z – 11.5", A – 360° Max, B – 90° Max

2 – STAR MODEL ATG-6AC 6-AXIS CNC TOOL GRINDERS, S/Ns 45157 & 43150 (1999),GE Fanuc 2050 CNC Control, Workpiece Centers Max 27", Workpiece Diameter .12" – 4", Travels: W – 3", X – 8.4", Y – 4.6", Z – 11.5", A – 360° Max, B – 90° Max

CnC ROBOTS1 – FANUC R-2000iA-165F 6-AXIS CNC ROBOT, F-76219 (2006); R-J3iB Controller

(Hours 6,700), Controller S/N E06200286, Teach Pendant

1 – FANUC MODEL M-710iC 6-AXIS CNC ROBOT, F-78469 (2006), Model R-J3iCController (Hours 7,000); Teach Pendant

1 – YASNAC ROBOTIC UNLOADER, S/N RP1166-6 Z2-11 (1999), Yasnac SK16Controller, MRC Pendant; May Be Offered With Aida Knuckle Joint Press

1 – FANUC MODEL S-700 CNC ROBOT, F-13181 (1992), Fanuc System R-H Controller,Teach Pendant; May Be Offered with Induction Heat Cell

CnC GRinDeRS 1 – OKUMA MODEL GP-35N 2-AXIS CNC PLUNGE FEED

GRINDER, S/N 0511.0396, (1994) Okuma CNC Control,Coolant Filtration System

2 – FORTUNA CNC PLUNGE FEED GRINDERS, S/Ns 15920 &15905 (1988), FM4 CNC Control, Approx Swing 10" xCenters 20", Tail Stock, Dresser, Type FM43D 350/1000N42Drive

COLD FORMinG KnUCKLe JOinT PReSS1 – AIDA MODEL K1-630 694 TON KNUCKLE JOINT (COLD

FORMING) PRESS, S/N 10306-1153, (1996) Stroke 8.66",Strokes per Minute 25-45 Variable, Bolster 31.5" x 27.56",Slide 31.5" x 23.62", Die Height 21.65", Motorized Adjustment1.96", Bolster 5.9" Thick, Floor – Top Bolster 39.6", UpactingHydraulic Knock-Out – 22 Ton x Stroke 2.36"; 60 HP Drive,Aida Load Analyzer, Hydraulic Knock Out, Windows 28"Wide, Air Clutch & Brake; May Be Offered with YasnacRobotic Unloader

Visit Our Video Gallery at

www.hilcoind.com

brOaCHIng maCHInes • eLeCtrOn beam WeLder • gear maCHInery

to schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)6

(13) BROaCHinG MaCHineS1 – US BROACH MODEL 60x102" VPD 60 TON VERTICAL PULL DOWN STRAIGHT

BROACH – Rebuilt by Detroit Broach, S/N M91643, Stroke 102"

1 – ANN ARBOR MACHINE CO 30 TON VERTICAL POT BROACH, S/N N/A (2000),Stroke 54", Magelis Programmable Control, RHM Hydraulic Unit

1 – US BROACH MODEL 30T-66-VPD 30 TON VERTICAL PULL DOWN STRAIGHTBROACH, S/N M91457, Stroke 66", Dual Station, 60 HP Motor & Hydraulic Unit

1 – NATIONAL BROACH MOEDL VPD VERTICAL PULL DOWN HELICAL BROACH,S/N 92703 (1992)

1 – US BROACH MODEL 20T x 36" 20 TON VERTICAL PUSH UP BROACH, S/N VPU-1635 (1997), Stroke 36", Allen Bradley Dataliner Terminal

1 – US BROACH MODEL 30Tx90 PD 30 TON VERTICAL PULL DOWN BROACH, S/N M-91330, Stroke 90"

1 – DETROIT BROACH MODEL 10/66 DPPD 10 TON VERTICAL PULL DOWN BROACH,S/N 765060, Stroke 66"

1 – FEDERAL BROACH MODEL 15T42-VPD 15 TON VERTICAL PULL DOWN BROACH,S/N 03-V-101, 40 HP Motor & Hydraulic Unit

1 – US BROACH MODEL 6T X 66" VPD US BROACH 6 Ton X 66" Stroke VPD S/N M-92029

1 – FEDERAL BROACH MODEL 5T-24-VP 5 TON VERTICAL BROACH, S/N 81-R-110, 15 HP Motor & Hydraulic Pump

1 – FEDERAL BROACH MODEL 5 TON – 30PB 5 TON VERTICAL BROACH, S/N 96-V-111 (1996), 15 HP Motor & Hydraulic Pump

1 – FEDERAL BROACH MODEL 5T 24 VPD 5 TON VERTICAL PULL DOWN BROACH,S/N 99 V 109, Stroke 24", Gap Frame Hydraulic Press, 15 HP Motor & Pump

1 – US BROACH & MACHINE 6 TON VERTICAL HYDRAULIC BROACHING MACHINE,S/N M-92029, Stroke 66", 15 HP Motor

(13) PRODUCTiOn GRinDeRS3 – WARNER SWASEY MODEL ACC1020 PM 10" x 20" & SWP 10” X 20” PLUNGE

FEED GRINDERS, Swing Over Bed 10", Centers Distance 20", 25 HP & 30 HP Motor,Control Gage 900 Monitor

3 – SAGINAW MACHINE MODEL G-500-2 DUAL SPINDLE GRINDERS, S/Ns 1670-1279,1672-1279 & 1416 0977, Magelis Control, 5 HP Motor & Hydraulic Unit, Spindle Centers18", Max Vertical Height 16" Approx

1 – SAGINAW MACHINE MODEL G-500-2 DUAL HEAD PRODUCTION GRINDER, S/N1954-1081, 1416-06977, 5 HP Motor & Hydraulic Pump, Dual Chucks, Left & RightDressers, Spindle Centers 18", Max Vertical Height 16" Approx, Barnes Model MFE 20– 40" Paper Filtration System

1 – WARNER SWASEY MODEL ACC1040-SWP 10" x 40" PLUNGE FEED OD GRINDER,S/N 30335D

3 – WARNER SWASEY MODEL PMS-1040 10" x 40" PLUNGE FEED OD GRINDERS

1 – SIMMONS MACHINE TOOL MODEL MN 80017 STRAIGHT HEAD – STEP GRINDER,S/N 96144090-014 (1997), Siemens Acramatic 950 Control, Capacity 14" x 40"

eLeCTROn BeaM WeLDeRS2 – LEYBOLD HERAEUS MODEL NVW25 ELECTRON BEAM

WELDERS, S/Ns 739R, N/A, 200 Kilo Volt High Voltage Source,Beam Current 150 D-C Milliamperes; L-B Pumps; Two Tanks,Dunham-Bush Chiller, TCP Quick Panel Terminal

(5) GeaR inSPeCTiOn MaCHineS1 – M&M / GLEASON MODEL 3515 PRECISION GEAR

ANALYZER, S/N 5965 (1997), Diameter 13.5" Approx, TailStock Up/Down Control; PC, Monitor & Printer

1 – M&M SYSTEMS MODEL 3025 4 16 20 SERIES 3000 QCGEAR ANALYZER, S/N 5741 (1995), Diameter 20" Max, HeightMax 32" Approx.

1 – M&M SYSTEMS MODEL 2025 4 12 12 SERIES 2000 QCGEAR ANALYZER, S/N 5368 (1989), Plate Diameter 13",Height Max 30" Approx, IBM Computer, Printer & Monitor

1 – M&M MODEL 2025 4 1212 GEAR ANALYZER, S/N 4939, IBMComputer, Granite Plate

1 – ITW HEARTLAND MODEL 3500-14 GEAR ANALYZER,S/N 1789, IBM Monitor

(11) GeaR HOBBinG MaCHineS1 – SAMPUTENSIL MODEL SCTS GEAR HOBBER, S/N 1402,

Allen Bradley Panelview 900 Terminal

9 – MITSUBISHI MODEL GH300 HORIZONTAL GEAR HOBBINGMACHINES, S/Ns 330238, 330230, 330228, 330227, 330222,330216, 330208, 330179, & 330171, Eason Model 900Terminal, Carousel Type Changer/Loader, Max Length 12.25",Max Diameter 3.25", External Hydraulic Unit

1 – SAMPUTENSIL MODEL SCTS GEAR HOBBER, S/N 1402(1990), Allen Bradley DL20 Terminal

HOnIng maCHInes • drILLs • Heat treat • Lab eQuIpment

For more information, please visit us on the web at www.hilcoind.com 7

MiSC GeaR MaCHineRY2 – FELLOWS MODEL 75A SHAPER CUTTERS

6 – BROTHERS INDUSTRIES HOBBER CLIP & SHAVE MACHINES

1 – SAMPUTENSIL GRINDER, S/N 912

1 – ITW HEARTLAND MODEL 4823-08 AUTOMATIC GEAR INSPECTIONCELL, S/N 12263 (2000), Allen Bradley Terminal, Auto Load / Unload,Spartan Automatic Infeed Conveyor

1 – SAMPUTENSIL MODEL SU-SCT/3 GEAR & CHAMFER MACHINE, S/N1448 (1992)

2 – SAMPUTENSIL MODEL MLS 2S7A ROLL & CHAMFER MACHINES

HOninG MaCHineS/GUn DRiLLS/DeeP HOLe DRiLLS1 – AMT MODEL 05186UN SIX SPINDLE VERTICAL HONE, S/N 200419

(2005), 8 Station Rotary Table, Transfer Loader, Edmunds Gages DRO,Engis Bore Finishing System

1 – GEHRING MODEL Z-800-90 VERTICAL HONE, S/N GC-250 (2000),Single Head, Dual Station, Kuma Coolant Filtration System, BKW Chiller,Simatic Panel

2 – MICROMATIC TEXTRON MODEL 3MVH VERTICAL HYDRAULICHONES, S/Ns H9011 & H9010 (1989), Xycom Control, 5 HP Motor & RHMHydraulic Unit; Hansen Chiller; Flow Con Model BPB-15 Filtration System

1 – MICROMATIC TEXTRON MODEL3NHH-2 HORIZONTAL HONE, S/N H-9605 (2000), Operator's Console with Xycom Terminal, 10 HP Motor &Hydraulic Pump

2 – ACE MACHINE MODEL ABM GUN DRILLS, (1994), Four Drill & SingleDrill Unit, Indramat Drive, Chip Conveyor

1 – MASCO MODEL M5HV20A171\Z3630-4 CNC DRILLING STATION, S/N65797, Allen Bradley Series 8200 CNC Control, 4-Station Rotary Turntable,Two Head Drill

1 – DAVIS & THOMPSON / ROTOMATIC DRILL CO MACHINE J-5184 DEEPHOLE DRILL, S/N 1536 (1992), Three x 3 HP Drill Heads

1 – DADSON MODEL DS-3-7518CM DEEP HOLE DRILL, S/N 100692(1990), Three x 3 HP Drill Heads, Indramat Slide Drive, Livonia MagneticModel B-14 Chip Conveyor

1 – AGNEW DUAL HEAD DRILL & TAP MACHINE, S/N N/A, Opposing Drill-Draulic Drill Units

1 – MASCO MODEL Z-3630-GSI 6 STATION DRILLING MACHINE, S/N 0008-3241 (5497), Rexroth Indramat System 200 Controls, Index Table

DiaL inDeX PRODUCTiOn CeLL1 – ANN ARBOR FIVE STATION DIAL INDEX MACHINE (2000), Allen

Bradley Panelview 600 Terminal, 7.5 HP; Fanuc Model 100iB CNC Robot,F-73695; Fanuc Model LR Mate RJ-3iB Controller

HeaT TReaT eQUiPMenT2 – HOLCROFT / WILLIAMS INTERNATIONAL THREE LANE CARBURIZING

HEAT TREAT FURNACE LINES: Carburizing Furnace; Quench; SprayWash; Draw Furnace; Draw Pull Out; (1) with Yr 2000 Williams 18x22x24Pusher Prewash/Preheat Sections

3 – SURFACE COMBUSTION CORP RX GENERATORS, S/Ns BX40058-1, (2) N/A, Size S-50-100 & S-2-N, Capacity 10,000 CFH, Max Temp 1950° F

Quantity of Ipsen / Surface Combustion Corp Allcase Furnaces

inDUCTiOn HeaTinG1 – TOCCO INDUCTION HEATER, S/N 924148-34

1 – ROBOTRON MODEL 600100SS SURFACE INDUCTION HEATER,S/N 79-29151-1, Quench Tank, Control w/Allen Bradley Panelview 550 Terminal

LaBORaTORY & eLeCTROniCTeSTinG eQUiPMenTQuantity Of Testing Equipment Including: Trulogic SystemsTl6500 Spectrometer; New Age Ind Model NT-90 ProductionMicrohardness Tester; Buehler Model 63-1000 Vanguard Prep-Evation System; Leco Model C-200 617200-800 CarbonAnalyzer; Buehler Model Simpliment 1000 20-1415 MountingPress; Grieve Model INERT AB-500 Universal Electric Oven;Perkin Elmer 1600 Series Spectrometer; Sencore SyncGenerator; Sencore Auto Z Capacity Inductor Analyzer;Sorensen Lab DC Power Supply; Oscilloscopes; Pace ProcessControl Systems; MTS Model 458.10 Micro ConsolePowertrain Test Systems, Baldor Line Regen Vector Drive;Wayne Trail Shaft Seal Durability Test Stand; Omega Leak TestCells; New Age Industries Model MT-90 Micro HardnessTesters; New Age Industries Versitron Hardness Testers;Rockwell Wilson Hardness Testers; Perkins ElmerSpectrophotometer

InspeCtIOn • presses • tOOL COatIng system • Lab eQuIpment

to schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)8

inSPeCTiOn1 – BROWN & SHARPE XCEL VALIDATOR 9-12-9 BRIDGE TYPE COORDINATE

MEASURING MACHINE, S/N 1293114, Approx Travels: X – 36", Y – 47", Z – 36";Controller S/N 180-610-4-792; Renishaw PH10M Probe, PC-Dmis

1 – SHEFFIELD ENDEAVOR 9.15.10 BRIDGE TYPE COORDINATE MEASURINGMACHINE, S/N R-0513-0106 (1205), Approx Travels: X – 36", Y – 59", Z – 39"; RenishawPH10MQ Probe, PC-Dmis

5 – BROWN & SHARPE PCR / HORIZONTAL ARM CMMS; Renishaw Probe

1 – GIDDINGS & LEWIS / SHEFFIELD MODEL CORDAX DISCOVERY COORDINATEMEASURING MACHINE, S/N 1E6190 (1999), Approx Ranges: X – 38", Y – 22", Z – 16";Renishaw Model PH9 Probe

2 – SHEFFIELD MODEL RS-50 DCC BRIDGE TYPE COORDINATE MEASURINGMACHINES, S/Ns A-0092 & A-0412-389, Bridge Type, Measuring Range: X – 47.25", Y – 39.37", Z – 29.53"; Renishaw Model PH10M & PH10MQ Probes

1 – BROWN & SHARPE MODEL MISTRAL 775 (07.07.05) BRIDGE TYPE COORDINATEMEASURING MACHINE, S/N 0200-9206 (2000), Renishaw Model PH10M Probe, S/NR03620, Model PHC10-2 Controller, Travels: X – 28", Y – 26", Z – 18"

1 – HELMEL ENGINEERING MODEL 000-251 CHECKMASTER COORDINATE MEASURING MACHINE, S/N 78-02 (1987), Approx Ranges: X – 24", Y – 20", Z – 24";Sony DRO, No Probe

1 – PRATT & WHITNEY MODEL B SUPERMICROMETER, S/N 1278, Gear Width Gauge,Rahn Granite Plate, Dial Read Out

1 – OGP MODEL QL-20 20" OPTICAL COMPARATOR, S/N N-2970, Geometric Readout,Pendant Control

1 – OGP QL-21 20" CONTOUR PROJECTOR, S/N QL200195, OGP Clip Plus Vision Controller

1 – OGP MODEL QL-20 20" CONTOUR PROJECTOR, S/N QL200598, Projectron V AutoEdge Control, 2-Axis Read Out

1 – CORDAX MODEL 1000 COORDINATE MEASURING MACHINE, S/N N/A, Ram OpticalInstrumentation Visual Probe

1 – DORSEY MODEL 20P-V 20" OPTICAL COMPARATOR, S/N N-2968, Computer & Monitor

1 – JONES & LAMSON PC14A 14" OPTICAL COMPARATOR, S/N E-37221

2 – DELTRONIC MODEL DH14-612 14" OPTICAL COMPARATORS

2 – MAHR FEDERAL 5600, 5001 & 5000 SURFANALYZERS, Federal Control EMD-5101, S/N M

Quantity of Remog Model FMS 4210 Inspection Machines; Remog Model Fms1100 InspectionMachines; Sheffield Indicorder Geometry/Surface Profile Systems; Brown & Sharpe Model Micro-Hite 30" – 18” Electronic Height Gauges, Inches/Metric, Printer

Quantity of Height Gauges; Micrometers; Ring Gauges; Plug Gauges; Pin Gauge Sets; BenchCenters; Hardness Testers: Zeiss

STRaiGHTeninG & GaP FRaMe PReSSeS1 – EITEL MODEL ARP 40\3-3 40 TON AUTOMATIC CNC STRAIGHTENING

PRESS, S/N 25789 (1996), Eitel Operator's Control & Xycom Terminal, Stroke6" Approx, Daylight 30" Approx, Bed 18" x 60" Approx, Platen 13" x 22" Approx.

1 – EITEL MODEL ARP/25 25 TON STRAIGHTENING PRESS, S/N 25782 (1996),Eitel Operator's Control & Xycom Terminal, Bed 20" x 60", Centers 26" Approx.

1 – JENNY MODEL RZ 225/3-800 25 TON STRAIGHTENING PRESS, S/N86.515, Plunger Stroke 7.9", Clear Height 23.6", 8.5 HP Motor & Hyd. Pump

1 – COSA CORP – GALDABINI TYPE SCAN/20 20 TON HYDRAULICSTRAIGHTENING PRESS, S/N 31992 (1984), 15 HP Motor & Hydraulic Unit,Traveling Fixture

Quantity of Denison & PH Hydraulics Gap Frame Presses

TOOL COaTinG SYSTeM1 – ION BOND MULTI-ARC PVD 3344 TOOL NITRIDE COATING SYSTEM, S/N

N/A (2000), Programmable Multi-Arc Control

1 – MODEL WINCOMP3 LIQUID HONING (WET BLASTING) BLAST CLEANBOOTH, S/N 3427, Dual Dip Tanks, Power Open & Close Doors, Pneumatic Guns

1 – FLOCEPT MULTI-ARC DUAL CHAMBER ULTRAJET 1 DIP TANKS, S/NUFS-2001-2092 & 2091; DE-IONIZER SYSTEM

FInIsHIng, FabrICatIng, & tOOL rOOm eQuIpment

For more information, please visit us on the web at www.hilcoind.com 9

FiniSHinG eQUiPMenT1 – MASCO POLISHER, Chuck Diameter 6"

1 – IMPCO THREE STATION SHAFT POLISHER, S/N 169-1040,Tailstock Plate Diameter 5" Approx, Shaft Length Max 36" Approx

3 – MASCO SANDER/POLISHERS

1 – ACME MODEL VERTICAL SPINDLE MICROPOLISHER POLISHINGMACHINE, S/N 27377 (1994), Chuck Dia. 10" Approx, Tailstock, MaxVertical Opening 34" Approx

FaBRiCaTinG eQUiPMenT 1 – ACCURSHEAR MODEL 625010 10' x 1/4" HYDRAULIC SQUARING

SHEAR, S/N 4990, Front Operated Power Back Gauge 36",Accurshear Backgauge Control, Squaring Arm 48", Hold downs

1 – PACIFIC MODEL K135-14/10 135 TON HYDRAULIC PRESSBRAKE, S/N A1313, Capacity 11' x 3/16", Hurco Autobend 7 30"Backgauge, Overall Bed & Ram 14' (2' Horn Extension), BetweenHousings 10' 6"

1 – PACIFIC MODEL J90-12 90 TON HYDRAULIC PRESS BRAKE, S/N5551, Overall Bed & Ram 12', Between Housings 10' 6", Stroke 7",Daylight 13", Gap 6", 2-Axis Manual Back Gauge, Lower Die Holder

1 – WYSONG D-72 6' x 3/16" INITIAL PINCH PLATE BENDING ROLL,S/N PR21-198, Roll Diameter 6", In-Feed Table, 7.5 HP Motor

1 – PIRANHA MODEL P70 70 TON HYDRAULIC IRONWORKER, S/NP70-63, Platen Table 12" x 21", Capacity: Punch 70 Ton; Shear 1" x 6",Angle 5" x 5" x 1/2", Round Bar 2"; Coper/Notcher

1 – HYD-MECH MODEL S-20 SERIES 2 HORIZONTAL BAND SAW, S/NN/A, Capacity: Round 13", Rectangular 13" x 18", Infeed Conveyor

1 – ROPER WHITNEY MODEL U414 48" x 14 GA. MANUAL FINGERBRAKE, S/N 299-1-94

Quantity of Miscellaneous Fabricating Equipment Including RoperWhitney Pexto 055 36” Bar Folder Sheet Metal Brake; Niagara 36” PlateRoll; Roper Whitney Pexto 3617 Crimping/Beading Machine; Pexto 544ABead Roller; Lockformer Seam Roller; Roper Whitney 1/4” Punch

TOOL ROOM eQUiPMenT1 – SUMMIT MODEL HTM4 HORIZONTAL TABLE TYPE BORING MILL, S/N 35-KB-0345, Spindle

Diameter 4.125", Table 48" x 60", Travels: X (Cross Feed) – 82", Y (Vertical) – 70.8", Z (Spindle)– 27.5", W (Saddle) – 63"; Rotary Table, Power Clamp

1 – ROMI BRIDGEPORT MODEL EZ PATH II 18" x 40" CNC ENGINE LATHE, S/N 016001731.349(1996), Hole Through Spindle 2.5", Speeds 4-3500 RPM, Tailstock, Cross Slide, Tool Post, 12" 3-Jaw Chuck, EZ Path CNC Control

1 – OKAMOTO MODEL 24-60 EX CNC 24" x 60" SURFACE GRINDER, S/N 34015 (1996),Okamoto Precision CNC Control

1 – BLANCHARD MODEL 22LD ROTARY SURFACE GRINDER, S/N AA15171, Chuck Diameter42", Segmented Wheel 22" Diameter

1 – ARTER MODEL A3-16 HORIZONTAL SPINDLE ROTARY SURFACE GRINDER, S/N BP2153,Magnetic Chuck 16" Diameter, 10 HP Motor

1 – HARIG MODEL 618 6" x 18" AUTO STEP SURFACE GRINDER, S/N 8833-H, ElectromagneticChuck 6" x 18"

1 – HARIG MODEL 612 6" x 12" SURFACE GRINDER, S/N 19063, Electromagnetic Chuck 6" x 12",Dust Collector

1 – CINCINNATI MILACRON MODEL 3 HEALD ID GRINDER, S/N 913527P900101, 2 HP, Multi-Surface Grinding Machine, Aercology Mist Collector

1 – CINCINNATI MODEL 12x48 ID/OD GRINDER, S/N 3532 3E77-0006, Red Head ID Attachment,Tailstock, Wheel Head, Pick Feed

2 – CINCINNATI MILACRON / HEALD MODEL 271 SIZEMATIC ID GRINDERS, S/Ns 47741 &41724, Swing Over Table 18", Max Hole ID 5.5", Grinding Spindle Motor 5 HP

1 – PARKER MAJESTIC MODEL 2C ID/OD GRINDER, S/N 60105-2C-96 (1996), Spindle Model3090, S/M 59080, Electromagnetic Chuck 10", 5 HP

1 – CINCINNATI MODEL 10x24 OD GRINDER, S/N 3525 2B5Y-0025, Tailstock, Wheel Head, HeadStock, 3 HP Motor

Partial Listing Only – Please

Visit Our Website for Full

Listing and Current Updates

www.hilcoind.com

tOOL rOOm • grInders • sHOt bLast • WasHers • CHIp prOCessIng

to schedule an auction, please call Hilco Industrial, LLC at 1-877-37-HILCO (44526)10

TOOL ROOM eQUiPMenT, COnT.1 – MARVEL SERIES 8 / MARK I UNIVERSAL TILT FRAME

VERTICAL BANDSAW, S/N 822468-W (1985), Infeed Conveyor

1 – DOALL MODEL 26-2 26" VERTICAL BAND SAW, S/N 54-54156, Tilt Table 30" x 30", Blade Welder

1 – DO ALL MODEL 16-3 16" VERTICAL BAND SAW, S/N 50-57787, Tilt Table 24" x 30", Blade Welder

2 – CLAUSING STARTRITE MODEL V500H 20" VERTICALBANDSAWS, S/Ns 203224 & 202814, Tilt Table 26" x 28", IdealBlade Welder, Sharpener

1 – BRIDGEPORT SERIES II VERTICAL MILL, S/N 7129 (1990),Table 11" x 58", 4 HP Drive, Newall DRO, 12" – 3 Jaw RotaryChuck, Speeds 50-3500 RPM

5 – BRIDGEPORT VERTICAL MILLS, S/Ns 277451 & 277446,267307, 261669 & N/A (late as 1998), Power Feed Table 9" x48", Vari-Speed, Heidenhain DRO, 2 HP Drive; One w/7” Riser;One w/Bridgeport Shaping Attachment

1 – BRIDGEPORT VERTICAL MILL, S/N 134268, Power FeedTable 9" x 42", Spindle Speeds 60-4200, Variable Speed,Heidenhain DRO

1 – HARRISON MODEL M450 ENGINE LATHE, S/N 450893 7518,Approx Swing 17.7” x Centers 45”, Hole Through Spindle 2 5/8”,Inch/Metric, Steady Rest, Tail Stock, 12.5” 4-Jaw Chuck, Speeds40-2000, Heidenhain 2-Axis DRO

1 – SOUTH BEND 8" x 30" ENGINE LATHE, S/N N/A, Cross Slide,Tailstock, Bed Length 4 1/2, 6" 3-Jaw Chuck

2 – HARDINGE MODEL HLV-H 11" x 18" SUPER PRECISIONTOOLROOM LATHES, S/Ns HLV-H-14960-T & HLV-H-15130-T(1996), Tailstock, Cross Slide, Heidenhain DRO

1 – PRATT & WHITNEY MODEL 2A JIG BORER, S/N N/A, Table22" x 44", Sony 2-Axis DRO

1 – RUSHOFF LUBRIZER WASHER, Conveyor Fed Washer,Length 33' Approx, Two Wash Pumps, Two Rinse Pumps

1 – ELECTRO ARC MODEL 20BQT METAL DESINTEGRATOR,S/N 9797, Table 18" x 26", Auto Feed Head

2 – EXCELLO / KENT OWENS MODEL 2-20 HORIZONTAL PRODUCTION MILLS, S/Ns 2-20-1865-RF & 1863-RF, Table 7.5" x 35”

1 – CINCINNATI MILACRON HORIZONTAL MILL, S/N13J2PA1EE-15, Table 12" x 54", Vise 10"

2 – KENT OWENS MODEL 2-20 HORIZONTAL PRODUCTIONMILLS, S/Ns N/A, Dual Fixture, Table 7.5" x 35"

TOOL & CUTTeR GRinD eQUiPMenT1 – HAMMOND MODEL 4 TOOL GRINDER, S/N 30291 – ROYAL OAK TOOL & CUTTER GRINDER, S/N 25R02491, Dual Head

1 HP Seneca Falls Motor, RO Universal Form Relieving Fixture1 – HINES SINGLE SPINDLE DRILL UNIT, S/N 3097-08, Pac Sci Servo Motor,

Telesis Model TMP3100 Pinstamp Marking System1 – RUSH MODEL 252 DRILL & TOOL GRINDER, S/N 1796 (1993), 6-Jaw

Chuck, Diameter 7" Approx.2 – CINCINNATI MODEL 2 TOOL & CUTTER GRINDERS, S/Ns 1D2T1L-1942

& 1D2T1R-754, Drill Point Holder & Tail Stock

SHOT BLaST eQUiPMenT3 – WHEELABRATOR SHOTBLAST CLEANERS, S/Ns A126643, A132878 &

A132884, Turntable Diameter 8' Approx, Dust Collectors2 – BCP SHOTBLAST CLEANERS, S/Ns 1000 (1985), A0590, Multi-Station

Turntable Diameter 5' Approx, 25 HP, Separator; Dust Collectors

(10) WaSHeRS5 – FUTURE FABRICATING MODEL 23A ROTARY CHAMBER WASHERS,

Chamber Diameter 32" Approx1 – RANSAHOFF ROTARY CHAMBER WASHER, Chamber Diameter

32" Approx 1 – ATEC TRANS TOOL MODEL ER100-S ROTARY WASHER,

S/N 0928994891 (1999), Diameter 28", 2 HP Motor & Gusher Pump1 – HOTSY 28" DIAMETER PRESSURE WASHER, S/N N/A, 3 HP2 – BOWDEN LIQUID TURBO-CHARGER WASHERS (2000), Stainless Steel,

Chain Loop Design, Gorman Rupp Pump, Parts Holder Rack, 200 GallonWash Tank

Quantity of Pallet/Dunnage Washers – Graypar; Vilo Systems; ASE; CAERansahoff; Jen-Fab; Valiant

CHiP PROCeSSinG / COOLanT FiLTRaTiOn SYSTeMS2 – NATIONAL CONVEYOR CO CHIP SYSTEM WRINGER / VIBRATING

SCREEN / APRON CONVEYOR / CRUSHERS1 – NATIONAL CONVEYOR INC CHIP WRINGER SYSTEM, S/N N/A,

Pneumatic Blower, Chip Wringer – Diameter 36" Approx, Vibratory Screen,Apron Conveyor

1 – HENRY MODEL 350MV-27 COOLANT FILTRATION SYSTEM, S/N 5926  1 – HENRY  MODEL 2560 MV170 MEDIA VAC COOLANT FILTRATION

SYSTEM, S/N 5243, Width Approx. 84”, Three Motors & Pumps

rOLLIng stOCk • sHOp eQuIpment • parts InventOry

For more information, please visit us on the web at www.hilcoind.com 11

MiSCeLLaneOUS SHOP eQUiPMenT1 – MHT 2 TON CRANE CELL, Single Girder Underhung

Bridge Approx 12'; 2 Ton CM Lodestar Electric Hoist, 6-Way Pendant

Over 150 sections Pallet Racking: 42” x 108” x 18’

Quantity Of Miscellaneous support MachineryIncluding Miller Maxatron Inverter Arc Welder, Miller 5,000Watt Generator/Welder, Miller Welder & 10,500 WattGenerator, Kalamazoo Circular Saw, Radiac Abrasive ChopSaw, 5 Ton Bushing Insertion Press, Etc.

Quantity of Mist & Dust Collectors: Amtech AV-6 FumeCollector; Spanco 1,000 Lb. & 500 Lb. Capacity UnderhungCranes, CM Lodestar Electric Hoists & Pneumatic Hoists;Jib Cranes – Electric Hoists & Pneumatic Hoists; MillerWelders – XMT/304; Deltaweld 452; Gold Star 852;Syncrowave 250; Wire Feeds, Auto Link; Lincoln DC400Welders; LN-7 Wire Feeds; Hypertherm Powermax1100/1000/600 Plasma Cutters; Dake Model 50H & 25HHydraulic Shop Presses

Large Quantity of Bearings: Ina / Fafnir / FaG / Timken/ McGill; Transformers; Tool Holders; Vidmar & Lyon Multi-Drawer Cabinets; Steel Storage Cabinets; Hand Tools;Ladders; Rolling Staircases; Steel Tables; (Over 30) Roura5-YD Self Dumping Hoppers; Snow Blowers, Shop Fans

PaRTS inVenTORY in eXCeSS OF $10,000,000

Allen Bradley, Ann Arbor, Atlas Copco, Cincinnati, Eaton,Eitel, Enerpac, Fanuc, Fanuc Robot; Fuji; Giddings & Lewis,Gould, Graco, Keyence, Leybold Heraeus; Mac Valves,Milacron; Mitsubishi, Mori Seiki, Okuma, Renishaw,Sinumerik, Toshiba, Wera, Wheelabrator, Xycom; Boring Bars;Carbide Inserts; Drives; Control Boards; Controllers; GrindingWheels; Panelview Terminals; Spline Racks; Light Curtains;Drive Motors To 125 HP; I/O Racks & Modules, RobotPendants, 40 & 50 Taper Toolholders

Many new, In the Box Replacement Parts

ROLLinG STOCK1 – BRODERSON IC-80-3F CARRY DECK, S/N 386052, LPG Type, Hours 1022;

Carry Deck Capacity 14,000 Lb.

1 – BOBCAT 753 SKID STEER LOADER, S/N 512732794 (Hours 3,656), RatedCapacity 1,300 Lbs, Bucket 60" Wide; Sweeper 60 Attachment

1 – ROYAL T300B 30,000 LB. CAPACITY FORKLIFT, S/N 890L279, LPG Type, MaxLift 107", Forks 72", Overall Height 108"

1 – CATERPILLAR GC70K 15,500 LB. CAPACITY FORKLIFT, S/N AT8900237, LPGType, Side Shift, Lift 132", 2-Stage Mast, Forks 60"

1 – HYSTER S120M 12,000 LB. CAPACITY FORKLIFT, S/N F004V02229B (2004),LP Type, Side Shift, 2-Stage Mast

2 – CATERPILLAR GP50 11,000 LB. CAPACITY FORKLIFTS, S/Ns AT3350213,N/A, LPG Type, 2-Stage Mast

3 – CATERPILLAR GP40 8,000 LB. CAPACITY FORKLIFTS, LPG Type, Lift 187", 3-Stage Mast, Forks 48"

1 – HYSTER 70 FORTIS 7,000 LB. CAPACITY FORKLIFT, S/N F187V13983F(2008), LPG Type, Side Shift, Fork Positioner, 2-Stage Mast, GM Motor

1 – CATERPILLAR GC30 6,000 LB. CAPACITY FORKLIFT, S/N 6EM02558, LPGType, Lift 187", 3-Stage Mast, Forks 42"

1 – CLARK CGP30 6,000 LB. CAPACITY FORKLIFT, S/N P365LT-0568-9527FB(1999), LPG Type, Lift 189", 3-Stage Mast, Forks 45"

1 – YALE GLC060ZGNGAE084 6,000 LB. CAPACITY FORKLIFT, S/NE187V11155W, LPG, Max Lift 187", 3-Stage Mast, Forks 42", Side Shift

1 – CATERPILLAR C5000 5,000 LB. CAPACITY FORKLIFT, S/N AT9004726, SideShift, Fork Positioner, 3-Stage Mast

1 – TOYOTA 7TB50 STAND UP ELECTRIC TOW TRUCK, S/N 69098 (2006), Type E

1 – MARMAC MM431600 35,000 LB. CAPACITY FORKLIFT SERVICE LIFT, S/NM2153, Floor Mount Hydraulic Unit

1 – CHALLENGER 27000 9,000 LB CAPACITY TWO-POST VEHICLE LIFT, S/N 276682

3 – ROTARY LIFT SP0A9-202 9,000 LB. CAPACITY TWO-POST VEHICLE LIFTS,S/Ns SAD00A0191, N/A

1 – CUSHMAN MEDICAL BURDEN CARRIER, S/N 898315-8210, Capacity 2,400 Lbs

4 – CONFINED SAFETY EQUIPMENT CARTS

1 – MEDICAL SUPPLY BURDEN CARRIER, S/N N/A (Vehicle 354)

1 – MOTREC E-500 ELECTRIC BURDEN CARRIER, S/N 1042739 (2006), Bed 6',Fill Rite Series 900 Meter, Hose Reel, Hydraulic Tank, Capacity 5,000 Lb

1 – ELECTRIC BURDEN CARRIER, S/N N/A, PUMP UNIT W/Kohler Model 21-IF-063, S/N 250084L

1 – CUSHMAN 8983368 ELECTRIC BURDEN CARRIER, S/N 97017248, Bed 6'

2 – MULTI SHIFTER MSII-40 BATTERY TRANSFER STATIONS

OVER 20 ELECTRIC FORkLIFTs (4,000 – 8,000 LB. CaPaCITy), Clark, Caterpillar,Raymond

OVER 30 ELECTRIC PassEnGER CaRTs

Quantity of TUGGERS (TO 4,000 LB. CAPACITY), Including Kalamazoo, A&GMercury, Harlan Corp, Clark

Quantity of Floor Scrubbers: Tennant/Nobles & Magnum; Forklift Replacement PartsInventory; Wheel Press; Battery Chargers: Applied Energy/ CEN / Douglas Legacy /Exide / Ferro Five / La March; Batteries: Douglas Legacy / Exide

Headquarters31555 W. Fourteen Mile Road, Suite 207Farmington Hills, MI 48334Ph: 877-37-HILCO (44526)Fx: 248.254.9995

www.hilcoind.com

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 2655

Hilco Industrial, LLCA u c t i o n e e r s • L i q u i d a t o r s • A p p r a i s e r s

HILCO Industrial, LLC is a division of Hilco trading, LLC • Headquarters 5 revere drive, ste. 206 • northbrook, IL 60062 • all rights reserved

printed in usa • neW0068 • IL License #444.000215 • please visit our website at www.hilcoind.com to review our complete terms and conditions.

Atlanta • Birmingham • Birmingham (UK) • Boston • Charlotte • Chicago • Connecticut • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong

Irapuato (MX) • Leeds (UK) • London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Toronto • Villahermosa (MX)

Terms of SaleA buyer’s premium of 13.5% for all onsite sales &16% for all webcast sales is in effect. Everything willbe sold to the highest bidder for cash, in accordance withthe Auctioneer’s customary “Terms of sale”, copies ofwhich will be posted on the premises of the sale and sub-ject to additional terms announced the day of sale. All itemswill be sold “as is, where-is” without any warranties,expressed or implied. Although obtained from sourcesdeemed reliable, the Auctioneer makes no warranty orguarantee to the accuracy of the information herein con-tained. bidders are encouraged to thoroughly inspect theitems on which they intend to bid prior to sale. Absolutelyno items will be removed until the day after the conclusionof the sale and payment is made in full. subject to additions, deletions and prior sale. For updated information, please visit our website at www.hilcoind.comfor any date, sale process, terms and conditions and listof available assets.

Payment: ALL  PURCHAsEs  MUsT  bE  PAID  IN  FULL  ONTHE  DAY  OF  THE  AUCTION. If you intend to pay by wiretransfer, we will accept payment the day after the saleONLY  IF  a deposit of 25% of total purchases is made onthe day of the sale. Contact our office for wire transferinstructions. Only cash, wire transfer or certified check,payable to Hilco Industrial, LLC will be accepted. Companychecks payable to Hilco Industrial, LLC will be acceptedonly if accompanied by a bank letter of guarantee, (seesample letter below). All sales are subject to sales tax.Purchasers claiming exemptions from taxes must provideproof satisfactory to the Auctioneer of their entitlement toclaim such exemptions.

Sample Bank Letter(bank Name) unconditionally guarantees payment toHilco Industrial, LLC from (Company Name). This guar-antee will be valid for purchases made at the Auctionof Magna Powertrain on september 18-19, 2012.

WebCast/OnsIte auCtIOn

FollowUs on:

Final Sale – Complete Plant Wind Down of New Process Gear, Division of

FinaL SaLe in a SeRieS OF aUCTiOnS

Over 3,000 Lots!