Fiberspar LinePipeTM

The Leader In Spoolable Pipeline Systems

August 21, 2009

Field results show FibersparLinePipeTM can save 20% or moreover externally coated steel.Perfect for multiple applications andenvironments

Available in 2” to 6” nominal sizes, Pressure ratings of 750, 1,500 and 2,500 psi Operating temperatures from －29°F to 140°F, or－29°F to 180°F

Sweet or sour oil or gas gathering lines High-pressure water or CO2 injection systems Remediation of existing corroding steel flowlines Suitable for a wide range of capacity and temperature

requirements

Why the savings are real Faster, easier installation Zero corrosion and related

maintenance costs Rapid field-installed line connections Fit-to-purpose installation methods by

your contractors Strategically located deployment centers Innovative design and manufacturing

technology

Faster, easier installation – less than half the time withless manpower and equipment Projects staged at our deployment centers and

delivered installation ready

Long lengths (approximately 1 mile common) withminimal joints or connectors to reduce pipe handlingand to expedite installation

Light weight for improved safety and speed ofinstallation

No welds, coatings or x-ray inspections required Fiberspar Field Technician on location to

operate specialized equipment, and to provideexpert, continuous on-site support

Projects on-stream faster

Faster, easier installation Field-proven deployment systems that allow your

contractors to ensure rapid, cost-effective installation

US and Latin America deployment

Rim drive system

Horizontal carousel system

Single line system

Faster, easier installation Canada deployment

A-frame system

A-train system

B-train system

Low maintenance costs – 100% corrosion free

No need for cathodic protection, wraps,coatings or internal chemical treatments

Low friction, smooth internal surface for betterflow properties

LinePipe can be pigged or hot oiled

Rapid, safe and reliable pipe-to-pipe orend connections – patented connectors install in30 minutes or less with hand tools Coated steel fittings Field installed Design safety factor 4x the pipe

operating rating No glues or epoxies used

Rapid, safe and reliable pipe-to-pipe orend connections Various configurations available

Welded on flanges -- standard Weld prep—standard Threaded ends, hammer unions or as required

Standard material: 4140 steel, coated forcorrosion resistance

Optional material Stainless, alloy or weldable steel Other metal grades and configurations by

customer request

Installation methods – designed for speed and safety,all extensively used to install Fiberspar LinePipe

Conventional open trench – fast, minimalfittings, less labor than jointed pipe LinePipe installs in 1/3 the time of jointed pipe in

many cases Can be pulled through bore holes below grade for

quick road and pipeline crossings Long and continuous lengths eliminate need for

welds, coatings and x-ray inspections Install in a continuous length even in irregular

trenches Same-day production in most cases

Installation methods

Plow installation – low footprint,unmatched cost savings

Can install multiple lines in a singlepass as deep as 8 ft (2.4 m)

Continuous lengths just undertwo miles

Plows matched to field conditions Permit rights-of-way that are narrower

and less costly than open ditchinstallation

Extensive field experience

Installation methods

Riser chute installation – minimize time andexpense Reduce costs and complexity of traditional rigid

steel risers Eliminate below-ground connections, 90-degree

fittings and fabricated metal add-ons Fiberspar best practices and installation guidelines

assure smoother installation

Installation methods

Surface lay – fastest and lowest costinstallation possible

Minimal environmental impact UV inhibitors protect the main laminate

from deterioration, for years of durableservice in exposed applications

Pipe should be protected in areas ofheavy traffic or road crossings

Installation methods

Remediation – the fastest and most economical routeto permanent flowline replacement with minimal grounddisturbance Far less costly than line replacement – minimal

excavation and surface disruption New line installed – not a repair Despite reduced flow area, better flow properties typically

result with no loss of capacity or increased pressure drop Remediation application supported with various specialty

services Wireline/winch for pull installations Patent-pending injector for push installations Injector/wireline combo for extremely long lengths, or

challenging terrain

More than 1,000 miles (1,500 kilometers) installed insidefailed steel lines to-date

Deployment centers – strategically located

Rapid response staging point for equipment andinventory California: Bakersfield Colorado: Grand Junction Texas: Houston, Freer, Big Spring, Kilgore Wyoming: Rock Springs Pennsylvania: Charleroi Alberta: Nisku, Lloydminster, Grande Prairie Saskatchewan: Estevan

Customer choice of contractor, with full-reelpurchase available

Certified Installer Program with online support Choose the installation provider you prefer Count on professional, efficient and competent

installation

Innovative technology – more than 25 million feet(7.6 million meters) installed Exclusive and unique patented design

Temperature rated from －29°F to 140°For 180°F continuous operation

Full range of sizes – 2.5” to 6” pluscustom diameters

Full range of operating pressures – 750 to2500 psi plus custom pressures

21 US and Canadian patents Meets or exceeds the flow rates of

conventional steel lines of comparablediameter

Wear resistant Unique integrally bonded structure

Innovative technology

Manufacturing – outstandingconsistency and dependability In-house, continuous linear processing and

multi-tier QAQC approach ISO 9001 Compliant Quality System Quality affirming Certificate of Conformance

with every shipment Meets or exceeds API, ASTM, CSA

specifications (plus Shell, ExxonMobil andPEMEX and Canadian Energy ResourcesConservation Board standards)

Field performance proven by major E&P companiesthroughout North America

More miles in successful operation thanany other spoolable pipeline product 25 million ft/7.6 million m installed and

operating Flowline of choice for more than

250 operators Field worthiness independently confirmed

by Canadian Energy ResourcesConservation Board, formerly AEUB

Field performance proven by major E&P companiesthroughout North America Other examples

6,500 ft in one day; 20% lower costthan steel

15,320 ft in 2.5 days; corrosion problemseliminated

4,500 ft flowline rehab prevents 6 monthsof lost production

700 man-hours trimmed from 12-mile,37-line installation

$45 million NPV savings Canadian steel gathering system remediated for

less than 1/2 the cost of steel replacement Canadian operator cuts installation costs

1/3 with multiple line plow installation

The Leader in Spoolable Pipeline Systems

Unparalleled cost savings Unrivaled experience in all environments Most installed miles in the industry Comprehensive installation, engineering,

training and technical support services Extensive online engineering and installation

guides, and advanced technical resources Customer choice of contractor, with full-reel

purchase available Certified Installer Program with online support

Contact us – boost your bottom line

© 2009 Fiberspar LLC. LinePipe and Fiberspar are marks of Fiberspar Corporation. (FBS910/web_US&CAD/0609)