femap 11.1 what's new
DESCRIPTION
Presentation outlining the new features and capabilities of Femap version 11.1.TRANSCRIPT
Unrestricted © Siemens AG 2013 All rights reserved. Smarter decisions, better products.
Femap 11.1 What’s New
November 2013
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 2 Siemens PLM Software
Femap Release Schedule
For several years, Femap has been on an approximately yearly release schedule
• v11.1 November 2013• v11: January 2013• v10.3.1: January 2012• v10.3: October 2011• v10.2: October 2010• v10.1.1: January 2010• v10.1: August 2009• V10: December 2008
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 3 Siemens PLM Software
Femap 11.1Launch Plan
Femap version 11.1 • Announcement: November 2013• Release to manufacturing: early
November 2013• Available online on GTAC site
• Shipping to customers: mid November 2013
• Available in 32-bit and 64-bit versions
NX Nastran• NX Nastran 9 is included in
Femap with NX Nastran bundle• NX Nastran 9 is 64-bit only (NX Nastran 8.5 can be
bundled with Femap 11.1 if 32-bit versions are required)
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 4 Siemens PLM Software
Femap Direction
Femap continues to provide:• A modeling environment that’s dedicated to FEA• The in-depth, detailed functionality required to accurately model real-world
parts and assemblies• Customer driven features and functionality
Courtesy of NST
Courtesy of Kotchergenko
Courtesy of NASA JPL
Courtesy of Icepronav
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 5 Siemens PLM Software
Femap 11.1Primary Focus and Messages
Improved productivity through process improvement• Geometry modeling• Charting and free body enhancements• Intelligent model merging• Meshing and FE model management
Increased simulation scope through discipline extensions• NX Nastran integration enhancements• Design Optimization extensions
Faster preprocessing through performance improvements• Improved graphics architecture (OpenGL4.2)• XDB results attach
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 6 Siemens PLM Software
Femap 11.1Overview
• Geometry modeling enhancements• FE modeling enhancements• Postprocessing enhancements• Performance improvements• NX Nastran integration• Customer driven enhancements
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 7 Siemens PLM Software
Geometry ModelingNon-Manifold Add – Tolerance
Non-Manifold Boolean Add Tolerance
• Non-Manifold Add command brings vertices and surfaces together
• Geometry add operations now controlled by a distance tolerance
• Operates like the Parasolid Stitching or Sewing commands
• More tolerant joining of entities that are separated by:• Overlaps• Gaps• Offsets
• Facilitates model creation and manipulation
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 8 Siemens PLM Software
Geometry ModelingNon-Manifold Add – Multiple Bodies
Adding multiple bodies• Algorithm starts with the first body, and adds the next closest body one at a
time• Produces a single solid• Tolerance control
• Similar to Stitch / Sew• Incremental Checking
• Checks resulting Parasolid body after each step – it it’s not OK, rolls back andskips that solid
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 9 Siemens PLM Software
Geometry ModelingNon-Manifold Add – Multiple Bodies
Ship model example• 1119 surfaces• Break selection into sections for
larger models• Free Edges are highlighted upon
completion to show what was connected
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 10 Siemens PLM Software
Geometry ModelingNon-Manifold Add – Multiple Bodies
• Removes geometric discontinuitiesensuring contiguous mesh creation
• Can use the Meshing Toolbox tofine tune the mesh
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 11 Siemens PLM Software
Geometry ModelingSolid Sweep
Solid Sweep• Sweep surfaces along curves to create solids• Adds to the array of geometry creation tools
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 12 Siemens PLM Software
Geometry ModelingSolid Sweep Between Surfaces
Solid Sweep Between Surfaces
• Sweeps between surfaces to create a solid• User selected surface anchor points control twist
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 13 Siemens PLM Software
Geometry ModelingSolid Sweep Between Surfaces
Blend Factor
• Controls the shape of the swept solid• Similar to the Blend Spline factor
0.5 1.0 1.5
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 14 Siemens PLM Software
Geometry ModelingSolid Sweep Between Surfaces
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 15 Siemens PLM Software
Geometry ModelingMid-Surface Extraction
New mid-surface extraction options• More robust face pairing commands able to extract mid-surfaces from a larger
array of problems• Takes advantage of recent developments in the Parasolid modeling kernel
• Automatically combine mid-surfaces
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 16 Siemens PLM Software
Geometry ModelingSurface from Mesh
Surface from Mesh updated to include special case code for Ruled Surfaces• More robust
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 17 Siemens PLM Software
Geometry ModelingIGES Export
IGES geometry export• Points and Curves can be
exported to IGES• Type 116: points• Type 100: circular arc• Type 110: line• Type 126: B-spline
116,0.01905003810008,0.23653797307595,0.00793751587503; 1255P 628308,0,7HDEFAULT,1,1255; 1257P 629408,1257,0.,0.,0.,1.; 1259P 630110,0.,0.23177546355093,0.00635001270003,0.,0.28257556515113, 1261P 6310.00635001270003; 1261P 632308,0,7HDEFAULT,1,1261; 1263P 633408,1263,0.,0.,0.,1.; 1265P 634110,-0.0254000508001,0.25717551435103,0.00635001270003, 1267P 6350.0254000508001,0.25717551435103,0.00635001270003; 1267P 636308,0,7HDEFAULT,1,1267; 1269P 637408,1269,0.,0.,0.,1.; 1271P 638124,-1.,-0.00000000000001,0.,-0.01746253492507,0.,0.,-1., 1273P 6390.27940055880112,0.00000000000001,-1.,0.,0.00793751587503; 1273P 640100,0.,0.,0.,0.00158750317501,0.,-0.,0.00158750317501; 1275P 641308,0,7HDEFAULT,1,1275; 1277P 642408,1277,0.,0.,0.,1.; 1279P 643126,13,3,0,0,1,0,0.,0.,0.,0.,0.125,0.125,0.25,0.25,0.375,0.375, 1281P 6440.5,0.5,0.75,0.75,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1.,1., 1281P 6451.,1.,1.,-0.01746253492507,0.23495046990094,0.11271272542545, 1281P 646-0.01765373537375,0.23495046990094,0.11271272542545, 1281P 647-0.01783022130207,0.23498580466822,0.11263322219907, 1281P 648-0.01811825230885,0.23508395458128,0.11241238489468, 1281P 649-0.01823405440875,0.23514546677531,0.11227398245812, 1281P 650-0.01843168889108,0.23527537077965,0.11198169844834, 1281P 651-0.01851354274338,0.23534441689078,0.11182634469832, 1281P 652-0.01865513132483,0.23548587734675,0.11150805867237, 1281P 653-0.01871469598581,0.23555841976443,0.1113448382326, 1281P 654-0.01886827687589,0.23577881594684,0.11084894682217, 1281P 655-0.01893760203569,0.23592937735218,0.11051018366017, 1281P 656-0.01902870993318,0.23623253105108,0.10982808783763, 1281P 657-0.01905003810008,0.23638528750077,0.10948438582583, 1281P 658-0.01905003810008,0.23653797307595,0.10914084328169,0.,1.; 1281P 659308,0,7HDEFAULT,1,1281; 1283P 660408,1283,0.,0.,0.,1.; 1285P 661
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 18 Siemens PLM Software
FE ModelingModel Merge
Model Merge• Rebuild legacy FE models• Reconstruct assemblies or reassemble components
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 19 Siemens PLM Software
FE ModelingModel Merge
• When multiple models are open in Femap at the same time• Copy entities from one model to another with complete control over inclusion
and renumbering of:• FE Entity types• Boundary conditions• Materials• Properties• Groups• Layers• Analysis set
• Model orientation and transformation control• File, Merge can also be used to transfer frequently used Materials, Properties,
Layups etc. from existing models to new models
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 20 Siemens PLM Software
FE ModelingModel Merge
Control Source and Target Model
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 21 Siemens PLM Software
FE ModelingModel Merge
Preview of IDs currently in use in both Models
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 22 Siemens PLM Software
FE ModelingModel Merge
Control which Entity Types get copied
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 23 Siemens PLM Software
FE ModelingModel Merge
Control selection of Entity Types to renumber
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 24 Siemens PLM Software
FE ModelingModel Merge
Control and Preview Renumbering
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 25 Siemens PLM Software
FE ModelingModel Merge
Grouping and Transformations
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 26 Siemens PLM Software
FE ModelingModel Merge
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 27 Siemens PLM Software
FE ModelingTetrahedral Meshing
Tetrahedral meshing• Multiple tetra elements through the thickness option• Based on initial surface mesh
Initial surface mesh
Final tetra mesh
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 28 Siemens PLM Software
FE ModelingTetrahedral Meshing
Tetrahedral meshing• With the latest tetra-mesher most flat tetrahedra are eliminated
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 29 Siemens PLM Software
FE ModelingMeshing Toolbox
Control Pad alignment in Meshing Toolbox• Default• Tangent• Along Vector• Includes Pad and Washer
combinations as well
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 30 Siemens PLM Software
FE ModelingMesh Offset
Mesh Copy – Offset• Copy and offset elements along the element normals
• Option to include corner correction similar to that used in extruding shells to solids
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 31 Siemens PLM Software
PostprocessingAttached Results Files
• Introduced in version 11.0 (OP2)• Expanded to include .XDB files
• NX and MSC Nastran XDB formats• Native Femap code• No external libraries required
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 32 Siemens PLM Software
PostprocessingAttached Results – XDB Files
• MSC Nastran• Supports HK (original) and Binary Tree (from 2005) storage methods• Method selected via DBCFACT parameter on NASTRAN command (all three
options are supported)• 0 – no multi-key format (default): produces the original format XDB file used
by MSC and NX Nastran• 2 – auto-select multi-key method: data blocks possible in both formats• 4 – Multi-key format: data blocks are always written using the Binary Tree
method
• Limitations• Single Nastran database per XDB supported• Design optimization not yet supported
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 33 Siemens PLM Software
PostprocessingAttached Results – CSV Files
Attach user created comma separated variable (CSV) files• Significantly more powerful than existing CSV file import• Output Set control – multiple in one file• Nodal scalar• Elemental scalar• Nodal vector• Nodal vector with rotations• Elemental data with corner• Elemental data with corner (not linearly combinable)• Elemental data beam/bar data• Elemental data beam/bar data (not linearly combinable)
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 34 Siemens PLM Software
PostprocessingAttached Results – CSV Files
100 - Output Set 1000 (or Output Set ID)Set TitleSet Value-1NOTE: If this file is read into Femap, the Output Set ID is ignored – a new Output Set will be created for each Table 100 encountered. All other tables that come after this are added to that Output Set, until another Table 100 is found. All tables except this one can come in any order, or have as many occurrences as you need.
400 - Nodal Vector (Global Rectangular)
400Result Type (0 for Any)Total Vector ID, X Vector ID, Y Vector ID, Z VectorID (0 for Auto)Total Title, X Title, Y Title, Z TitleNode ID, X Value, Y Value, Z Value…Node ID, X Value, Y Value, Z Value-1NOTE: Although you specify a vector ID and title for the “total” values, you do not actually include those in the data. Femap will automatically compute the vector sum of the components and store that as the total.
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 35 Siemens PLM Software
PostprocessingAttached Results – CSV Files
100 New Output Set0 Let Femap Assign the Output Set IDOutput Set for Attach Testing Title0.0 Output Set Value-1 Done with this Data400 Type 400 – Nodal Vector Data1 Data Type 1 - Displacements9000000,9000001,9000002,9000003 Vector IDs, including the Total Calculated by Femap, Titles on Next LineTotal Calculated Displacement,X Calculated Displacement,Y Calculated Displacement,Z Calculated Displacement 1,0,0,0 Node ID, Component Values2,-0.001666567,0.006526019,0.0002787663,-0.001184595,0.02125182,0.0005717274,0,0,05,0,0,06,0,0,07,0,0,08,0,0,09,-0.003282172,0.006492931,9.54E-0510,0,0,011,-0.001753719,0.02088428,0.00010224912,0,0,013,-0.002532253,0.00624941,0.00014073714,-0.000608656,0.02053312,0.00011521167,-0.001589356,0.1602065,-0.0190350872,7.13E-06,0.2087363,-0.0196183977,0.001350387,0.07328212,-0.0127429379,0.002388,0.0206234,-0.00667166685,-0.001828255,0.04186719,0.0131877588,0.001549801,0.02205666,0.009206097-1 Done
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 36 Siemens PLM Software
PostprocessingExport FNO
• Export results data (internal or attached) to binary .FNO file via API• Smaller and faster• rc = App.feFileWriteFNO( 0, ouVecs.ID, feGroup.ID, fno_Name )
• Example model• 450,000 nodes and elements• 600 output sets• 160+ GB OP2 file
• FNO export• Export sub-model (area of interest)• ~1,000 nodes and elements• 2.6 MB model .NEU file• 10.8 MB .FNO results file
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 37 Siemens PLM Software
PostprocessingAttached Results – Future Development
Format Status
.op2 – Nastran Completed v11.0
.fno – Femap & NEi Nastran Completed v11.0
.xdb – Nastran Completed v11.1
.csv – User Defined/Excel Completed v11.1
.rst & .rth – ANSYS Future
.odb – Simulia (ABAQUS) Future
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 38 Siemens PLM Software
PostprocessingCharting
• Added new data series type• Value vs. Value• Allows for plotting of quantities such as
applied force vs. displacement at a specified location
• Reorganization of chart data series dialog to only show relevant items
• Improved rendering when copying charts to the clipboard at non-screen resolutions
• Increased user control over fonts, labels, colors for chart entities
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 39 Siemens PLM Software
PostprocessingFreebody
• Added ability to force Freebody calculations to only consider applied, constraint and multipoint constraint forces from GPFORCE data block
• By default, Femap will use applied, spc and mpc forces from OLOAD, SPCFORCE and MPCFORCE requests if that data was not available in the GPFORCE block, however there were some cases where Nastran would not report the same number in both places (e.g. thermal applied loads across rigid bodies)
• New validation tool to check if all requested values exist in the result set
• Freebody listing tools updated to provide more relevant output
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 40 Siemens PLM Software
Performance ImprovementsGraphics Architecture
• Single copy of graphics entity data within a model• Previously kept a copy per view of model
• Significant <Ctrl-G> improvement as raw data already in memory
• Phased introduction• First release accelerates solids and plates
• Deformation, Animation• Contour, Criteria
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 41 Siemens PLM Software
Performance ImprovementsGraphics Architecture
• Uses Geometry Shader functionality that requires OpenGL 4.2• Moves workload from CPU to GPU
• Dramatic reduction in volume of data required• Shader uses same data for filled faces or edges• State changes done in GPU on the fly
• Such as shrink, plate thickness• Deformation – faster animation generation
• Contour only faces with results – good for contact
• Contouring done in fragment shader• Better quality near min and max contour values• Better quality interior interpolation
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 42 Siemens PLM Software
Performance ImprovementsGraphics Architecture
V11.1 – OpenGL 4.2+ graphics• Faster graphics• Significantly reduced memory usage
Takes advantage of Parallel GPU Processors, some graphics cards now have 448 processors, in Femap v10.1/11.0, Femap controlled processor utilization, now the graphics driver optimizes parallel processor usage.
Example model meshed with 34584 elements and 50975 nodes.Data requirementOpenGL 1.1: 46x34584 = 1,590,864 floatsOpenGL 2.1: 292x34584 = 10,098,528 floatsOpenGL 4.1: (3x50975)+(10x34584) = 498,765 floats
10.3 11.0 VBO 11.1
Graphics Memory
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 43 Siemens PLM Software
Performance ImprovementsGraphics Architecture
Test of normal Femap Modeling Operations –• Display Full Model from Group –• Autoscale
1.1 M 2.3 M 3.4 M 4.5 M 5.7 M 6.8 M 7.9 M
v10.3.1
v11.0.1
v11.1.0
Model Size
Grp
hic
s P
roce
ssin
g T
ime
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 44 Siemens PLM Software
Performance ImprovementsGraphics Architecture
Performance graphics vs. regular graphics comparison• Model: 6 million nodes / elements• Action: full model display / group / full model display
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 45 Siemens PLM Software
Performance ImprovementsGraphics Architecture
“ATA uses Femap with very large finite element models. The 11.1 release significantly improves performance across the board with some tests revealing a 5x graphics performance improvement, making Femap an even more powerful tool for analysis.”Paul Blelloch, Director, Aerospace Analysis, ATA Engineering, Inc.
Images courtesy of ATA Engineering Inc.
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 46 Siemens PLM Software
Performance ImprovementsVisibility & Load Expansion
• Visibility Dialog Box – underlying code was rewritten to more quickly populate the Property, Material, Group selection boxes
• Load expansion from geometry to a mesh enhanced for elemental face-based loads on surfaces (pressure, heat flux, convection and radiation)• For large models with many loaded
surfaces, load expansion times reduce from minutes to seconds
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 47 Siemens PLM Software
NX NastranPyramid Element
• Nastran Read/Write Support
• Manual Creation
• API Access
• Potential future integrating into Femap’s Solid Meshing Routines
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 48 Siemens PLM Software
NX NastranExecutive and Solution Options
• Base filename definition
• Enter the base filename to beused to name analysis files (-000 appended)
• Can individually name analysissets
• Aids workflow
• Enhanced restart support
• Opt for Read Only restarts
• Specify model version and subcase ID
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 49 Siemens PLM Software
NX NastranDesign Optimization
• Design optimization normal modes support
• Specify a mode eigenvalue or frequency as a design constraint
• Option for mode tracking through cross-orthogonality checking
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 50 Siemens PLM Software
NX NastranDynamic Response Output
• RMS Von Mises stress output for random analysis• Calculated using the Sandia Labs method (report: SAND98-0260)
• Transient response composite ply results• Stress / strain output for individual laminae defined on PCOMP or PCOMPG• PARAM,NOCOMPS controls laminate vs. smeared output
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 51 Siemens PLM Software
NX NastranLoad and Constraint Set Combination Display
• Nastran LOAD Combination load sets display• Nastran SPCADD / MPCADD Combination constraint sets display
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 52 Siemens PLM Software
Customer Driven EnhancementsGrouping
Group / Operations / Generate• Non-Manifold Edges will force breaks at T-junctions
Example: 105 groups are automatically created representing each interior panel and rib
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 53 Siemens PLM Software
Customer Driven EnhancementsModify / Project
• Added new commands• Modify / Project / Points • Modify / Project / Nodes
• Removed old commands on the Modify / Project menu that previously projected points and nodes to specific entity types
• Improved the projection algorithms • Accept multiple curves/surfaces to project onto• Allow projection along a vector in addition to "closest" for all types.
• Added the feProjectOnto() API method to access the new capability and converted old API "project" calls to use the new internal functions
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 54 Siemens PLM Software
Customer Driven EnhancementsUser Interface
Tooltip display
• Optionally display group and layer information when using Tooltips• Appears both in the Tooltip and Entity Info pane
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 55 Siemens PLM Software
Customer Driven EnhancementsCreate Line or Measure Between Geometry
Measure distance between geometry tool• Measure minimum, maximum or both between multiple selected geometry
entities
Create Line between geometry• Multiple Lines and maximum,
minimum or both between multiple selected geometry entities
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 56 Siemens PLM Software
Customer Driven EnhancementsEdge to Edge – Split at Closest Point
Edge to edge split surface• Split at closest position between curves
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 57 Siemens PLM Software
Customer Driven EnhancementsLoad Set Combination Data Surface
• Spreadsheet style definition of combination load sets• Create definitions in Femap Data Surface or import from Excel• Sum loads of constituent sets on-the-fly• Create new combination load cases in Femap
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 58 Siemens PLM Software
Customer Driven EnhancementsTools Check Extensions
Tools Check extensions• Coincident Nodes: merge across output coordinate
systems• Sum Forces:
• Loads on selected nodes and elements• Selected load definitions• Optionally include Body Loads
• Element Quality• All On/Off buttons to aid criteria selection• Show button highlights elements that violate any
selected quality thresholds• List Quality Summary • List Quality Details with optional list to Data Table
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 59 Siemens PLM Software
Customer Driven EnhancementsEntity Renumber by Coordinate Direction
Modify Renumber• Renumber entities according to
selected coordinate system direction • Specify positive or negative for
each direction independently
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 60 Siemens PLM Software
Customer Driven EnhancementsModel Info Tree Entity Count
Model Info Tree• Show model entity count button• Toggle entity count for each section on / off
2013-11-02
Unrestricted © Siemens AG 2013 All rights reserved.
Page 61 Siemens PLM Software
Q and A