Product Description

Details

The FELIX 2.0 is our latest and greatest iteration of our printer. It packs a lot more features compared to it's

predecessor.

More reliable printing of large object . due to very even heat distribution of newly designed heated

bed.

Stand-alone printing . out of the box, no constant need of a computer.

Higher quality. prints.

Reduced assembly time . of at least 3-4 hours. Get your printer up and running significantly faster,

without soldering.

See this blog post for more details.

http://www.felixprinters.com/blog/2013/03/felix-2-0/

The main points of it's design are more emphasized and improved significantly:

Quiet operation. Due to the rigid frame, bearing type and low noise fans you can enjoy your prints

come to life in peace

Reliable. Engineered with durabiltiy in mind, which keeps you printing for many many hours.

Extremely easy to assemble (4-12 hrs). A minimum amount of bolts have to be screwed, which saves

you a lot of assembly time and annoyance

High-tech industrial appeal. Professional appearance brought to your home.

Rigid construction. The aluminum frame is strong enough to whithstand the highest accelerations of

the moving parts. This will result in high quality prints

Easy to calibrate. The components are not mounted in an overdefined way, this gives you short

calibration time and get's you printing faster.

Main specifications:

Print volume / build size (X,Y,Z) (255, 205, 235) mm

Frame size (X,Y,Z) (450,500,530) mm

Accuracy 0.05 mm

Total mass 6.7 kg

Nozzle diameter 0.35 mm

Filament diameter 1.75 mm

Build time (depending upon experience) 5 - 12 hrs

Heated Bed included

Optical endstop sensors

The printer is designed in the following modules:

Frame module:

Extruded aluminum frame parts

Easy connectors, the frame is assembled by just screwing 6 hex bolts

X (moving head) and Y (moving table) module:

Linear ball bearing

Printed parts

Toothbelt

Pulley

Opto-sensor

NEMA 17 motor

Heated bed

Z-axis module:

Linear ball bearing

Printed parts

Precision machined trapezium lead screw with bronze nut

Opto-sensor

NEMA 17 motor

Extruder/Hot-End module:

Hot End

2x Fan

NEMA 17 motor

Electronics module:

FELIXprinters electronics

3x opto-sensors

1.8m USB cable

Power cable

Display is NOT YET included, will be available later as extra part.However standalone printing is possible, without

display.

Miscelleaneous parts:

Tie wraps

Bolts and nuts

Handle

12V 250W Powersupply FlexATX