fdm may/june 2009

May/June 2009

Subscribe to FDM Asia’s e-book at www.fdmasia.com

EnErgy Saving SurfacE DryingUVCURING

The comeback Kid

Decorativeveneers

an introduction

cross LaminateDTIMBER

Waste not,Want not

redefines industryrecycled Wood Waste

For specifiers

ahec: true GritPreparing Companies

for The coming upturn

an age old material for a new age of thinking.

american hardwood.

alderashaspenbasswoodbeechbirchcherrycottonwoodelmgumhackberryhickory & pecanhard maplesoft maplered oakwhite oaksassafrastulipwoodwalnutwillow

america’s hardwood forests just keep on growing, find out about our exciting range of sustainable species by visiting ahec-seasia.org

stage furniture in american red oak and black walnut by philip koomen for the guardian hay festival.

ENQU

IRY

NO.

055

HOLZMA panel-sizing saws – always a good solution

The new 4 series: The follow-up models of the 11 series and the HPP 510 are here: the HPP 430 and HPL 430 with 125 mm saw blade projection, and the HPP 410 and HPL 410 with 110 mm saw blade projection and cutting lengths of up to 5 600 mm. That is pure performance!

Transport and storage systems Save time and money – with automatic feeding and destacking solutions from HOLZMA and with storage systems from BARGSTEDT.

Improved CADmatic: Real-time, 3D moving graphics, a new design and many other innovative features make the HOLZMA control software even more attractive.

Speed up your internal processes: Cut RiteHOLZMA’s own optimisation software Cut Rite is the leading product of its kind on the market and has been enthusing customers for decades. Request your trial version now!

More than just cutting: handlingHOLZMA has developed a number of solutions to ensure gentle handling of pressure-sensitive material and to protect scratch-sensitive surfaces.

More than just cutting: Triple Mix The new HOLZMA Triple Mix standard permits, for the first time ever, an objective comparison of the performance of panel-sizing saws.

NEW!

HA Malaysia Sdn BhdMALAYSIATel: +60 3 7880 [email protected]

HOMAG Asia Pte LtdTAIWAN (R.O.C.)Tel: +886 3 397 [email protected]

CUT TO SIZE TECHNOLOGY

HA (Thailand) Co LtdTHAILANDTel: +66 2 681 [email protected]

HOMAG Asia Pte. Ltd.729504 SINGAPORETel: +65 [email protected]

| BAGRGSTEDT | BRANDT | BÜTFERING | FRITZ | HOLZMA | HOMAG | LIGMATECH | TORWEGGE | WEEKE | WEINMANN | SCHULER |

ENQUIRY NO. 061

2 FDM AsiA May/June 2009 | www.fdmasia.com

ContentsMay/June 2009 • VOL. 21 NO. 4

Member of Business Publication audit of Circulation, Inc.

Incorporating:

The Chinese Academyof Forestry

Associate of

etm EasternTrade Media Pte Ltd

an Eastern Holdings Ltd company

Printer: Fabulous Printers Pte Ltd

FDM Asia is published eight times a year (printed 2nd week of issue month) by

Eastern Trade Media Pte Ltd1100 Lower Delta Road, ePL Building #04-02, Singapore 169206 Tel: (65) 6379-2888 • Fax: (65) 6379-2805/6379-2806 • Website: www.fdmasia.com

IMPORTANT NOTICEThe circulation of this publication is audited. The Advertiser's Association recommends that advertisers should place their advertisements only in audited publications.

Established since 1986, FDM Asia, formerly Asia Pacific Forest/Timber Industries, is a business magazine on sawmilling, woodworking, woodbased panels and furniture manufacturing. The Publisher reserves the right to accept or reject all editorial or advertising material and assumes no re-sponsibility for the return of unsolicited artwork or manuscripts. All rights reserved. Reproduction of the magazine, in whole or in part, is prohibited without the prior written consent, not unreasonably withheld, of the pub-lisher. Reprints of articles appearing in previous issues of the magazine are available on request, subject to a minimum quantity.

The views expressed in this journal are not necessarily those of the Publisher and while every attempt will be made to ensure the accuracy

and authenticity of information appearing in the magazine, the Pub-lisher accepts no liability for damages caused by misinterpretation of information, expressed or implied, within the pages of the magazine. All correspondence regarding editorial, editorial contributions or editorial content should be directed to the Editor.

The magazine is available on subscription in Singapore at S$126.00 (GST applicable) per annum by surface mail. Subscription by airmail to readers in the Asia Pacific costs S$160 per annum; Europe and the Americas S$230 per annum. For further details refer to the subscription card found within the pages of each issue. For more subscription information, please fax to: (65) 6379 2806 or email: [email protected]

MICA (P) NO. 025/01/2009 • PPS 1204/7/2009 • ISSN 0219-2284

Focus20 CARB: Setting The

StandardsCalifornia has passed a strict air-quality measure that has significant ramifications for the woodworking industry on the opposite side of the Pacific Ocean – and beyond. By Jason Wang, GM, Franklin Guangzhou adhesives

26 Surface Drying: Energy Saving UV CuringuV-drying processes consume 45 percent less energy than their conventional counterparts. By Frederick D Muëller

TEchnoLogy28 Boosting The Process

Recent additions in nested-based manufacturing include improved algorithms, flexible CaDCaM file import capabilities, product lifecycle modules and better machining communications. By augustine Quek

32 Cross Laminated TimberThis introduction for specifiers offers an overview of the applications and benefits of using cross-laminated timber as well as design issues. Contributed by Trada

PAnELs36 Wood Meets Glass Fibre:

Light But Stronga composite material that combines wood veneer with fibreglass offers product variation and utilisation for furniture manufacturers. By Dr Hamdan Husain, Forest Research Institute Malaysia

38 Waste Not, Want NotFunctional products produced from recycled wood waste have the potential to redefine the wood working industry. By augustine Quek

FocusGrass: All For One & One For AllFurniture makers benefit as Mepla-Alfit, Hetal and Grass come under one united fittings brand.

page 24

SiempelkampMaschinen- und Anlagenbau GmbH & Co. KGSiempelkampstraße 7547803 Krefeld · Germany Tel.: +49 (0) 21 51/92-30 Fax: +49 (0) 21 51/92-56 04

www.siempelkamp.com

ContiRoll® – the original made by Siempelkamp • Cost effective – speeds of up to 2000 mm/s (6.6 ft/s)

• Precise – thickness tolerance of 0.1 mm

• Safe – special steel belt protection

Therefore, the original.

Success with thin-board production plantsThin MDF with a thickness ranging from 1.5 – 4.5 mm opens up completely new application areas.Siempelkamp has developed a special thin MDF board production plant and introduced it with great success.9 plants were sold during the last 2 years; 4 plants have started operating successfully.

Pfleiderer, Poland

Lesonit/Fantoni, Slovenia

Turanlar, TurkeyStarwood, Turkey

Yingang 1-3, ChinaAnhui Huqian, China

Sumatera Prima Fibreboard, In

donesia

Con

tiR

oll

® thin-board production

plan

ts

Made by Siempelk

amp

Original

ENQUIRY NO. 001

ContentsMay/June 2009 • VOL. 21 NO. 4

Please refer to advertising index on page

p72b

p72RegulaRs6 editorial8 Industry news71 Calendar Of Events72 Advertisers Index

for enquiry numbers.

Subscription Page

executive insights41 True Grit AHEC aims to prepare companies in South-east Asia to reposition

themselves for the coming upturn says John Chan, its SEAsia & Greater China regional director.

58 The US Economy & Its Timber Industry There is a huge way to go before the

US consumer engine of growth really gets up any steam. By Michael Buckley, consultant, World Hardwoods

60 China’s Timber Production Plan For 2009

Timber output expected to hit 100 million cubic metres in 2009

MateRials & suRfaces44 Decorative Veneers: Comeback Kid Wood veneers have seen a resurgent presence amidst the growing environmental

awareness. By Malte Herrmann, head of marketing, Danzer Group

46 Beautifully Varnished - Using Renewable Fraunhoefer researchers have come up with a varnish that's hard wearing,

scratch-resistant and best of all, environmentally-friendly.

haRdwoods & softwoods48 Drying Of Treated Timber

What are the common situations when treated timber will need drying? Contributed by Maryline Foucher, Cathild Industrie

50 The High Temperature Drying Way Conventional steam-heated systems take a back seat as high temperature drying

process emerges for high throughput of kiln-dried lumber. By Choo Kheng Ten and Sik Huei Shing, Forest Research Institute Malaysia

52 Hardwoods & SoftwoodsHardwood – Yellow Meranti, AppleSoftwood – Radiata Pine

54 South-East Asia: Sustainable Forest Management & Certification Practices

The disparity in national practices calls for negotiations to ensure that a common standard is agreed upon. By Dr Jegatheswaran Ratnasingam

MaRKet/countRY RePoRt57 Malaysia’s National Timber Industry Policy: Blueprint For Growth

exhibitions63 AHEC: 14th South-east Asia

& Greater China Convention

64 Interzum Guangzhou

66 Domotex Asia / ChinaFloor 2009

68 ZOW Shenzhen

70 China Furniture & Woodworks 2009

4 FDM AsiA MAY/JUnE 2009 | www.fdmasia.com

64

Cover Credit: dv SYSteMS

44

Increase your timber yield by optimizing with the Raimann

KM 310 M. This optimizing solution includes the RaiMech

E5 Infeed system, complete with TimberMax optimizing

software, touch screen, multi-function joystick and laser

measuring system. This intelligent rip saw has a capacity

of up to 6 boards per minute! Invest in a Raimann rip

optimizer now, and start making more money!

MICHAEL WEINIG ASIA PTE LTD18 Woodlands Walk • Woodlands East Industrial EstateSingapore 738392 • Tel: +65 67585178 • Fax: +65 [email protected] • www.weinigasia.com Weinig Asia WEINIG

GROUP

Increased Yield = More Money!

RAIMANN KM 310 M

RaiMech E5 Infeed System

TimberMax Optimizing

Movable Saw Blades

Ex-stock Singapore

ENQUIRY NO. 060

t’s a no-holds barred fight to the bitter end with heavyweight contenders – the EU and

the US in one corner, and illegal loggers, in the other.

While the European Union has been on the illegal logging bandwagon for some

time now; this time it’s a lot different – they come armed with power punches, supplied

courtesy of the European Parliament.

On April 22, the European Parliament voted in favour of stricter rules on timber sold

within the bloc's markets, including the introduction of sanctions against offenders. It

wants to make all traders and producers, responsible for clearly indicating the source of

their products and the supplier of the timber through a traceability system.

The move effectively criminalises illegal timber trading, obliging EU member states

to impose financial penalties on those found in breach of the law. Amendments to the

proposal include penalties "at least five times the value of the timber products obtained by

committing a serious infringement". The relevant authorities are tasked to take "corrective

measures", such as "the immediate cessation of commercial activities" and "the seizure of

timber and timber products."

The tough stance by the heavyweight contenders reflects the extent of the problem.

The World Wildlife Foundation estimates that almost a fifth of timber coming into the EU

market, came via the back door (ie: illegal sources). The EU’s fight now goes before a June

meeting of EU ministers in Luxembourg, where it will be hammered out further.

As for the US, they were in the ring since last year – slugging it out with an extended

Lacey Act to prosecute anyone caught red-handed with illegal timber.

The fight is made more significant because of its far-reaching implications. It is closely

watched here in Asia as both the EU and the US are significant consumers of timber

products, and, illegal logging is often associated with tropical wood.

Malaysia is definitely not sitting in the sidelines of this fight either – it’s going for the

distance as the EU is the country’s third most important timber destination (with annual

timber export worth some RM2.8 billion), they are in the final phase of concluding a

bilateral voluntary partnership agreement (VPA) with the EU, to promote trade in legally

produced and harvested timber.

Neither is Indonesia sitting in the sidelines. The country’s timber exports to the EU

reached US$1.2 billion last year and its exporters have begun to certify their products

through surveyor companies.

The final round of this fight will start in June in Luxembourg where the EU Agriculture

Council will meet and slug out amendments to the proposal. When adopted, new measures

should come into force in 2010/2011 – and hopefully, signal the long awaited knockout

blow to the illegal timber trade.

Published by:

EastErn tradE MEdia PtE Ltd(a fully owned subsidiary of Eastern Holdings Ltd)Registration No: 199908196C

Head Office & Mailing address:Eastern Trade Media Pte Ltd1100 Lower Delta Road, EPL Building#04-02, Singapore 169206 Tel: (65) 6379-2888 • Fax: (65) 6379-2805

representative Office - shanghai, China Office:Shanghai New Eastern Media Co. Ltd15D Block B, Victoria Plaza, No. 1068, Xikang Road, Shanghai, P.R, China 200060 Tel: 86 21 6311 3676 • Fax: 86 21 6311 2960

etm EasternTrade Media Pte Ltd

an Eastern Holdings Ltd company

EASTERN HoLdiNgS LTd ExEcutivE Board

chairman Stephen Taygroup executive director Kenneth Tanfinancial controller Robbin Lim

managing director Kenneth Tan [email protected]

managing editor Eileen Chan [email protected]

journalist Therese Tan [email protected]

editorial assistant Eunice Tay [email protected]

senior art director/studio manager Lawrence Lee [email protected]

graphic designer Winnie Lee [email protected]

advertising sales manager Canice Gan [email protected]

business manager (china) Ding Yongmei [email protected]

senior circulation executive Brenda Tan [email protected]

contributors Jason Wang Michael Buckley Augustine Quek Hamdan Husain Malte Herrmann Choo Kheng Ten Sik Huei Shing Maryline Foucher Dr Jegatheswaran Ratnasingam Frederick D Muëller

industry consultants Michael Ginnings Consultant, Ginnings Far East Associates

Ong Kim Chuan Managing Director Haleywood Director

Winston Chiu President Technik Associates Inc

Francis LL Lam MBA (UCLA) Arpa (Shanghai)

Science of the times

Eileen chan

DOWN for the COUNT

Editorial

6 FdM asia MAY/JUNE 2009 | www.fdmasia.com

ENQU

IRY

NO.

027

HOW TO FOOL AN EXPERT.

www.ibondwood.com

I-BOND® is a registered trademark of Huntsman Corporation or an affi liate thereof in one or more, but not all, countries.

ondwood.comwww.ibo

Fooling this wood expert took the MDI adhesive industry’s best brains at Huntsman. Today you too can tap into their expertise. The I-BOND® family of fast-curing MDI resins are able to improve the effi ciency of your plant, while providing enhanced physical properties and reduced resin loading. With no added formaldehyde, I-BOND® resins also allow you to meet increasingly stringent VOC regulations. Please contact us for further information on the many benefi ts you will derive from using the I-BOND® family of products.

The last thing we want to do is fool you too!www.ibondwood.com

HUN_Adv IBond_205x275.indd 1 25-02-2009 09:42:47


Industry News

Robert Bürkle Goes Into PhotovoltaicsFreudenstadt, Germany: Specialists

for press and laminating lines, Robert

Bürkle, raised its turnover from €108

million (US$140 million) to €115 million

last year. The machine builder managed

to achieve a sales volume of €31 million

(representing 27 percent of turnover) in its

new photovoltaic sector and envisages that

it would attain half of the turnover in the

photovoltaic industry by the end of 2010.

In the wood-based panel industry,

Bürkle realised €50 million last year.

Homag Wants A Return To Positive Operating Result

Stuttgart, Germany: The Homag

Group aims to return a positive

operating result for the year

2009 as a whole, despite the

anticipated substantial drop

in sales revenue.

Spokesman of the

management board Dr Joachim

Brenk anticipates a significant

drop in sales revenue and

earnings in the first half of

2009, but trade events like

Ligna will provide new stimulus

and generate new orders in

the second quarter.

Speaking at a press briefing

on the annual results of the

group, CFO Andreas Hermann

Some €34 million came from its electronic

industry while the rest came from its

service sector. Last year, the company

invested some €5.5 million in new

machines and buildings at their sites

in Freudenstadt, Rietberg-Mastholte,

Germany and Shanghai, China to extend

the expertise in pressing and laminating.

Due to the currently tense economic

situation, its MD, Hans Joachim Bender

predicts a decrease in turnover of more

than 30 percent in 2009. The company

forecasts an economic pick-up in the wood

sector by the end of 2010 at the earliest.

According to its press release, the

management hopes to survive 2009

without any borrowings as the equity of

the company has been increased seven

times during the last decade.

At the end of last year, the company

sold 13 multi-opening laminators and

13 single-opening laminators. “Two

further Ypsators have been ordered and

will be supplied by this summer,” says

Hans-Joachim Bender, its MD.

adds that the company is

well prepared even for a

significant downswing. “We

have already reduced the

number of contract workers

by more than 310 and during

2009 more than 320 temporary

employment contracts will

also come to an end,” says

Mr Hermann. These measures

and others combined will

enable the group to reduce

its personnel capacity by

more than 25 percent in 2009.

Dr Brenk stressed that

the Homag Group wants

to emerge from the current

market crisis as one of the

winners. “Being market

leader and a strong group

with worldwide operations

affords us a clear edge over

smaller competitors.” On

the order intake front, effort

will be made to increase

its market share as the

year progresses. Potential

acquisition opportunities will

also continue to be appraised.

For the fiscal year 2008,

sales revenue increased to

€856 million (US$1,112 million)

(€837 million in 07), raising the

market share from 24 to 26

percent. Order intake came to

€618 million (€747 million in

07), while the order backlog as

of December 31, 2008 came

to €164 million (€255 million)

including the figures for Benz

GmbH Werkzeugsysteme, in

which the Company acquired

a majority holding as of

January 1, 2009.

Dr Joachim Brenk

www.fdmasia.com | FDM ASIA May/June 2009 9

Industry News

Eumabois ‘Choose The Original’ Campaign Focuses On QualityMilan, Italy: The European Federation of

Woodworking Machinery Manufacturers

(Eumabois) promotional campaign to

protect the intellectual property rights

of those working in the manufacturing

woodworking technologies and tools,

kicked off with its first topic – on quality.

The first of seven articles under its

banner ‘Choose the original – choose

success’ highlights one the seven strengths

of the woodworking sector’s uniqueness

(ie: quality, high technology, know-how,

reliability, safety, efficiency and experience).

The press article describes quality as

fundamental in the continuous search to

produce ever better machinery and tools,

and that it permeates every stage of the

process that leads to a machine or a tool

being manufactured. It adds: “Quality is

a strategy, because it means deciding to

offer clients goods of an absolute value,”

and, is the result of a process that aims

at achieving a precise standard.

thousands of actions, choices, thoughts,

and solutions. A high-quality product is

the sum of quality behaviour.”

The release notes that achieving quality

is intrinsic in the strategies and habits

of companies that know the value of

technology, that know how much the

success of their clients depends on the

quality of their project, on the quality of

the materials used and on the quality

that will be applied in each stage in its

manufacture, from the idea to the tool or

the finished machine.

In concluding, the article says: “Choosing

the original means choosing success,

because quality can only come from

quality. A superb sofa, a spacious wardrobe,

a practical kitchen, a sturdy staircase

reflect the kind of quality that has made

a long journey.”

eUMABOISEuropean Federation of Woodworking Machinery Manufacturers

Woodworking Technology Made in Europe

QUALITYDEVELOPED IN

UROPEe

The press article goes on to say:

“Quality cannot be improvised. Quality

aims for perfection, and therefore involves

ENQU

IRY

NO.

019


Industry News

Call To Set Up Timber Terminal In Central JavaJakarta, Indonesia: The Indonesian

Chamber of Commerce (ICC) has urged

the federal government to step up the

construction of timber storage facilities

for several provinces in Indonesia.

The country’s Industry Minister,

Fahmi Idris has mooted for the timber

Rahmat Gobel, vice-chairman of

the ICC, noted the facilities would help

reduce production costs and improve

the competitiveness of the Indonesian

furniture and handicraft industry. He

added that timber storage facilities

for East Java, Central Java, Sulawesi,

and Papua would significantly reduce

the amount of levies charged as well

as facilitate certification of timber in

storage facilities.

The terminal is expected to reduce

existing overheads by up to 15 percent

as the timber will be sold directly to

manufacturers. The timber export value from

wood-based products in 2008 amounted

to US$2.87 billion, a 8.17 percent drop

from the 2007 figure of US$3.12 billion.

terminal to be set up in Central Java as

it is the best-equipped province to do so.

The proposed terminal was projected to

be set up in 2008, but has been delayed

for various reasons.

“It only needs to decide the state

enterprise managing it, and to wait for

approval from the local legislature,” Mr

Fahmi said in a report by the Jakarta

Post. He expects the country’s first

timber terminal to be completed by the

last quarter of this year in the Kendal

regency. The administrators of the regency

have set aside a 2.5-ha plot of land

for the project while the Central Java

provincial administration will cover the

construction costs, and the Industry

Ministry will provide the machinery.

MTC To Explore New Markets

Kuala Lumpur, Malaysia: The Malaysian Timber Council

(MTC) is exploring new markets for Malaysian wood. The

news comes hot on the heels of the country’s first-ever

timber policy unveiled in March which aims to more

than double exports to over RM53 billion (US$14.5

billion) by 2020.

Speaking after a meeting with a 12-member delegation

from Syria, the council’s executive for trade promotion

and marketing, Fara Ismail, said the MTC was exploring

the countries of Syria, Turkey, Kazakhstan, Uzbekistan,

Poland and the Indian subcontinent

The council will use its overseas offices to assist in

its marketing efforts. Malaysia’s top four export markets

are Japan, the US, South Korea and China. Last year,

the timber sector contributed RM22.5 billion in export

earnings, a 3.1 percent dip from 2007.

Under the Third Industrial Master Plan that runs from

2006 until 2020, RM1.7 billion in annual investments

can be expected in this RM20 billion

a year sector.

Malaysia is the world’s largest

exporter of tropical logs and sawn timber,

the second largest supplier of plywood

and the tenth largest furniture-maker.

Ta Ann To Spend RM189m For Further Developments

Petaling Jaya, Malaysia: Ta Ann

Holdings, a Malaysian timber giant,

plans to spend RM125 million

(US$34.84 million) for its oil palm

plantation development, RM34

million for tree planting and RM30

million for its plywood division.

Datuk Wong Kuo Hea, Ta Ann’s

group MP and CEO envisage that

he will spend in total some RM189

million for 2009. According to a

report in The Star, the company

aims to focus on the Japanese

markets as some 90 percent of

its products are exported there.

Ta Ann is also considering

increasing its global market share

through its environmentally-friendly,

eco-plywood eucalyptus products.

“We are pushing very hard for

more market penetration,” he said,

adding that uncertainty in selling

prices, which were mainly market-

driven, remains a major challenge.

The company engages in the

manufacture and sale of timber

products, the development of

plantations and planted forests;

cultivation of oil palms also

operates as a logging and

plantation contractor and, timber

concession licensee. Some 47

percent of the company’s profits

are derived from logging, 45

percent from palm oil and the

rest from plywood, sawmill

and others.

For the nine months ended

Sept 30, Ta Ann made a net profit

of RM56.6 million (US$15.73

million) compared to the RM84.7

million achieved in the previous

corresponding period. Its Tasmania,

Australia subsidiary was named

Australia’s Emerging Exporter of

the Year at the annual Australian

Export Awards held in December

last year.


Industry News

Financing Facility For Pakistan’s Furniture export Industry

Karachi, Pakistan: The Long Term Financing Facility

(LTFF) for import of machinery will enable the country’s

export-oriented furniture manufacturers to expand further

and, meet international standards.

Chairman of the All Pakistan Furniture Exporters

Association (APFEA), Maqbool Elahi has confirmed

that the country’s Ministry of Commerce has approved

the use of LTFF for the import of machinery. This, he

added, will enable the sector to overcome its present

financial difficulties.

According to Pakistan’s Daily Times, Mr Elahi will ask

the government to establish a Goods Early Testing and

Material Testing laboratory for its furniture exporters.

He said this would help the local producers meet the

certification requirements of international buyers.

Former chairman APFEA, Turhan Baig Mohammed

said the export of furniture during July 2008 - February

2009 remained around US$11.5 million as compared to US$9.9

million in same period last year.

Pakistani exports to the United Arab Emirates were an

indication of the regional trade possibilities that exist. He

added that the sector could reach its export goal of US$750

million by 2013 if training facilities and development schemes

were provided.

Mr Mohammed added that the installation of a federal

timber board, with both private and public sector members

is necessary in order to restructure the sheesham wood

plantation and ban on illegal exports of raw materials. He

added: “We are in touch with Italian and German firms in

connection with the set up of training centres besides setting

up two Furniture Cities, one each in Karachi and Peshawar.”

Pakistan exports approximately US$16 million to UAE

(19 percent), Italy (15.5 percent), Canada (10 percent) and

Germany (9 percent).

44625_Novi_IMA:210x150 27.02.2008 16:29 Uhr Seite 1

ENQUIRY NO. 062

IMA Asia Pacific Pte. Ltd.2 Kallang Pudding Road #05-16 Mactech Industrial Building

Singapore 349307 Phone +65 674965-88 Fax +65 [email protected] | www.ima-sg.com

Durable!NOVIMATYour essential advantage in competitionThe advanced IMA-gluing unit is durable and consistent yet maintenance free – experience the IMA-High-End-Finish with the new flat scraper for a perfect finish.


Industry News

Japan Finalises Carbon Offset System For ForestsTokyo, Japan: Japan Lumber

Reports indicated that Japan’s

Ministry of Forestry has

established a forest carbon

credit system.

The system, which is based

on the J-ver (Japan Verified

Emissions Reduction) system

launched in November 2008,

will help calculate forest carbon

dioxide absorption and is the

first of its kind. The absorption

will be calculated and estimated

in credits, which can then be

sold to carbon dioxide emitting companies

already registered in the J-ver system.

The Ministry hopes the credits will be

traded in the carbon market and funds

reinvested in the forestry industry. Three

projects will hold particular attention in

the forest absorption system: thinning

promotion and management; sustainable forest

management; and plantation management.

Areas thinned after 2007 will be the

target of the efforts under the

Japanese system. Sustainable

forest management activities

will be in areas harvested and

replanted after 1990. Plantation

projects will focus on replanting,

and all forests eligible for credits

under the credit system need

to have a forest management

system compliant with the

Forest Law.

In order to generate credits,

one of the following three

conditions has to be satisfied: a

long-term forest management plan based

on the Forest Law must be in place; an FSC

or SGEC certificate must be granted to

the area; or a forest management system

must be established by local government.

A forestry resources preservation project at Kumano Kodo in Hongu Town.

Wak

ayam

a P

refe

ctu

ral G

ove

rnm

ent

ENQU

IRY

NO.

065

Wanted foreign general agent and Regional Sales Manager!

Shenzhen XinyunxiangPrecision Tools Co.,LTDAdd: 2D, Building A, Xingyi Industrial,Fuyong, Bao'an District, Shenzhen, ChinaTel: +86-755-27703707 27703556Fax: +86-755-27703750Email: [email protected] Http://www.xinyunxiang.com

The Shenzhen Xinyunxiang Precision Cutters Company is one of the largest manufacturer of woodworking cutting tools in China, it has

3 production branches, one for diamond cutting tools, another two for TCT sawblades, wood working drill bits and milling cutters.

®

18-22 MAY 2009Hall 13 Booth F47

LIGNAVisit us at

HANNOVER GERMANYWorld Fair For the Forestry and Wood Industries


Industry News

US Imposes 10 percent Duty On Imports Of Canadian LumberWashington DC, USA: The United States

Customs and Border Protection’s Office

of International Trade has advised the

trade community that its officers has

imposed a 10 percent duty on imports

of softwood lumber from Canada as

of April 15.

The duty was directed by the United

States Trade Representative under

Section 301 of the Trade Act on imports

of softwood lumber products from the

provinces of Ontario, Quebec, Manitoba

and Saskatchewan in Canada. The duty

will remain until the US has collected

US$54.8 million for the breach of its

softwood lumber trade deal. The LCIA,

formerly the London Court of International

Arbitration, ruled Canada miscalculated

Canada and the US signed a seven-

year deal on softwood lumber in 2006 to

settle a prolonged fight over allegations

Canada improperly subsidises its lumber

producers, which supply about 30 percent

of the construction lumber used in the

United States.

quotas for some lumber exports for the

first half of 2007.

The new tax in the long-running

bilateral dispute between the world’s two

biggest trading partners and also comes

as the US economic downturn takes a

toll from its housing market collapse.

ENQU

IRY

NO.

035


Industry News

FAO Concerned Of Impact Of Economic CrisisRome, Italy: The State of the World’s

Forests 2009 report issued by FAO in

Rome comments on the possible long-term

impact of the on-going economic crisis

on the world’s forests and wood sector.

FAO note that the collapse of the

housing sector in western countries has

reduced demand for a wide array of

wood and wood products, leading to

mill closures and unemployment. New

investments are slowing as a result,

affecting all wood industries.

The demand for environmental services

has also changed as a result of reduced

ability and willingness to pay for such

services. Carbon prices have remained

highly volatile. Future climate change

arrangements may face challenges as

countries give priority to tackling the

economic crisis.

FAO are concerned that this might

have negative impacts on forest resources

through, for example ‘reduced investment

in sustainable forest management and a

rise in illegal logging as the decline in the

formal economic sector opens opportunities

for expansion of the informal sector.

Land dependence, which had been

easing, could increase, raising the risk

of agricultural expansion into forests,

deforestation and reversal of previous

forest gains’.

But there could also be positive impacts:

‘reduced wood demand could lessen

pressure on forests, while conversion

of forest for large scale cultivation of

commercial crops such as oil-palm,

soybeans and rubber could slow as

their prices fall…. The forest sector

could benefit from the pursuit of a

“green path” to development – through

building up of natural resource capital (eg:

through afforestation and reforestation

and increased investments in sustainable

forest management), generation of rural

employment and active promotion of

wood in green building practices and

renewable energy.

Certainly, this change of path will

require fundamental institutional changes,

but the crisis may bring about greater

willingness to accept and implement

long-overdue reforms’.

Teragren Receives SCS CertificationWashington, USA: Teragren,

the US manufacturer of

bamboo flooring, panels

and veneer, announced

that select bamboo panels

and veneer now qualify for

SCS Indoor Advantage Gold

certification from Scientific

Certification Systems.

Teragren’s new

certification applies to

all unfinished traditional

bamboo panels and

unfinished 1/8” tradi-

tional bamboo veneer

(vertical and flat grains)

manufactured using the

company’s proprietary

No Added Formaldehyde

(NAF) adhesive.

SCS offers several

indoor air quality

certification programmes as

part of its ongoing efforts

to encourage improved

environmental performance

of consumer products.

The Indoor Advantage

programme applies to

any product generally

used within a school or

office indoor environment.

The company is

currently pursuing SCS-

certification for its entire

product line, including

its prefinished bamboo

flooring products.

Blum’s Lift System Wins Red Dot AwardHoechst, Austria: Blum’s Aventos

Servo-Drive lift system has won the

‘Red Dot award for top quality design’

presented by Design Zentrum Nordrhein

Westfalen annually.

The solution brings user convenience

to wall and kitchen cabinets.

The award-winning product used

Blum’s electric opening system to ensure

that lift systems open and close softly

and silently. A touch on fronts suffices

to set the lift system in motion. It closes

smoothly and conveniently at the press of

a designed switch in the cabinet interior.


China FoCusIndustry News

China’s Furniture Exports Up By 21%Beijing: China’s furniture enterprises

generated RMB210 billion (US$30.7

billion) during January to September

in 2008, up 21 percent over the same

period in 2007.

According to ITTO’s Tropical Timber

Market Report, the total value of furniture

exports rose 23 percent to US$19.8

billion. The volume of wooden furniture

exports fell 9 percent but the value of

the wooden furniture exports rose 6

percent over the same period. The value

of furniture imports grew 22 percent to

US$945 million.

Local experts predict that the total

output value of China’s furniture will

exceed RMB600 billion and the value of

furniture exports will be US$26.6 billion.

Currently, China furniture production

makes up 25 percent of the world’s

total, its furniture exports account for

23 percent of the world’s total and

it has been the major producer and

exporter of furniture in the world.

ENQU

IRY

NO.

066

add: no.10, Shilong induStrial road, Shiling induStrial Zone of lunJiao,Shunde diStrict, foShan city, guangdong Province, china.

tel: 0086-757-27721959Web: www.richfruits.comcontact: 0086-13928252573

fax: 0086-757-27721919e-Mail: [email protected]

RichfRuits machineRy manufactuRing co., Ltd.


Industry NewsChina FoCus

Heilongjiang See Growth Russian ConnectionBeijing: China’s northeast Heilongjiang Province, which

borders Russia, has reported a growth in foreign trade to

the tune of US$11.06 billion (increase of 3.1 percent) with its

northern neighbour in 2008.

The trade volume represents 19.5 percent of China’s total

trade value with Russia, said the report by the Heilongjiang

province commerce department. It noted that the increase

came after Russia lowered export prices

on resource-oriented products such

as timber. Trade was also improved

by the depreciation of the US dollar

and the Russian rouble.

The department noted that

Heilongjiang is just was one of the

three provinces in China registered

an export growth in January-February

this year. Exports increased by 26

percent to US$1.3 billion while imports

declined by 28 percent to US$390

million. Total trade for the first two

months of this year is up by 7.3 percent or US$1.69 billion.

The local government in Heilongjiang are looking towards

the expansion of economic ties with Russia, Japan and South

Korea. At the same time, the province intends to open up

new markets in the Middle East, Central Asia, Latin America,

Africa, Oceania and other emerging markets, says a report

in China Daily.

Heilongjiang is Russia’s largest provincial trading partner

with trade reaching the US$11.06 billion in 2008. Many like,

Weishilihe, a Heilongjiang-based timber door and window

maker, have moved from the markets of Europe and the US

Schelling Establishes Subsidiary In ChinaSchwarzach, Austria: The

Austrian specialist of industrial

cut-to-size, material handling

and automation solutions –

Schelling Anlagenbau GmbH

– has established a wholly-

owned Chinese subsidiary in

Changzhou, Jiangsu Province.

Working in close cooperation

with their German partners –

Wemhoener (Changzhou)

Machinery Manufacturing and

IMA (Changzhou) Int’l – Schelling

to the emerging markets like the Middle East and S Korea,

or, re-designed their products to match new demands.

Weishilihe now manufactures elaborate hand-carved

doors for the upscale markets of S Korea and the

Middle East. They are confident of meeting their export

projection of US$8 – US$10 million for this year to the

mentioned regions.

Suifenhe, a small city of

150,000 residents in southeast

Heilongjiang saw its exports and

imports surpassing the US$5.8

billion mark (a 25 percent increase)

last year. With some 460 firms

engaged in the wood industry,

the city has moved successfully

from the export markets of Europe

to, direct furniture sales to the

Russian market.

One such enterprise, Suifenhe

Friendship Wood Industry Group,

notched up sales revenue of RMB700 million in 2008.

Furniture exports of the company were around RMB60

million last year.

Chen Xiangzhou, its GM, said the company recently

invested in two timber processing factories in Russia to

ensure raw material supplies. He was quoted as saying that

he aims to have a profit of over RMB100 million this year.

Suifenhe Sanxia Economic and Trade Co is another

such company that is also working out its new export

strategies. More than half of its orders are now from

Russia reports its GM, Guo Shiming.

Japan Focus

(Changzhou) Trading is able to offer

production experience, advanced

technology as well as after-sales

service to its customers in China.

Contact details are as follows:

Schelling (Changzhou) Trading Co Ltd

16 Keji Avenue, Longhutang Town,

New District, Changzhou, Jiangsu

213031, China

Tel: 0519 8576 0858

E-mail: [email protected]

Web: www.schelling.com


China FoCusIndustry News

China To Stimulate Wood Products Trade

Beijing, China: Orders to China’s enterprises

for wood products exports have been

falling, as they struggle to raise revenues

during the international financial crisis.

The growth in total value of international

trade in wood products grew only 9.6

percent in 2008, a year-on-year decrease

of 13 percentage points. To respond to

the effects of the international financial

crisis and encourage wood products

trade, China has taken several measures.

These include increasing the rates

of the export rebate tax for 117 wood

products items; actively negotiating with

governments of importing countries/

regions such as the US, the EU and

Japan to improve market access for

forest products; and encouraging a quick

response to products manufactured by

domestic forestry enterprises, increasing

grades and specifications of products, as

well as stabilising wood products exports.

JSWB Home Furnishings Center Opening In GuangzhouGuangzhou, China: Jisheng

Wellborn Furniture Group

(JSWB), one of the largest

retail furniture malls operator

in China, has signed a contract

with the Poly World Trade

Center to establish the JSWB

Home Furnishings Center in

Guangzhou.

To be located within the

Canton Fair venue, the six-storey

facility will open in September

2009 and occupy some 111,480

sq m of retail furniture showroom space.

JSWB will also be hosting a bi-

annual JSWB International Furniture

Fair at the Center, and its adjacent

exhibition hall in March and September

(coinciding with the Guangzhou Fair)

with a number of international

brands that are currently not

exhibiting at the Guangzhou Fair,

the JSWB International Furniture

Fair is expected to strengthen

the position of Guangzhou as

the main venue for international

furniture fairs in southern China.”

Hakon Rydland, the company’s

executive vice president, will

oversee the JSWB International

Furniture Fair in Guangzhou and

the JSWB International Furniture

Fair in Shanghai.

The facility will house brands such

as Fairmont Designs, Fine Furniture

Design & Marketing, Natuzzi, Universal,

Alexandre International and Simon Li.

on a total area of some 200,000 sq m.

The company said in a press

statement: “With a strong focus on well

established Chinese brands that are

already having their showrooms with

JSWB at other locations, combined

ENQU

IRY

NO.

010


Product highlights

Siempelkamp: 4’ ContiRoll

enquiry no: 4001

enquiry no: 4002 enquiry no: 4003

CSil: pRofileS of 200 majoR fuRnituRe manufaCtuReRSWorld furniture production is worth about uS$352 billion and about 30 percent of the total is produced by the 200 major furniture manufacturers listed in CSIL Milano’s report: ‘Profiles of 200 Major Furniture Manufacturers Worldwide.’

This seventh edition, 357-page report contains company profiles of 203 furniture-manufacturing companies and groups, selected according to the volume of their sales. Basic data on the 203 furniture manufacturers are summarised in table format, by country and geographical area (europe, north america, asia), by company and by product type (home furniture, kitchen furniture, office furniture).

Company profiles are available for each furniture manufacturer, with information on company background, turnover, type of furniture produced and product breakdown, employees and production facilities, divisions, controlled companies and subsidiaries, brands, exports and outlet markets, distribution network and commercial strategies, investments and company strategies, mergers & acquisitions, joint-ventures.

Product highlights

The 4’-ContiRoll is the smallest in the Siempelkamp ContiRoll family. However, it offers all features of an 8 or 12 feet press, according to the manufacturers.

The 4’ x 33.8 m press produces 4’ x 8’ MDF with a thickness ranging from 4 to 18 mm at a speed of up to 1,300 mm/s. Besides its very low thickness tolerance, quick start-up, stable ramp-up curves, the 4’ version uses resources such as wood and glue, on a conservative basis, especially when compared to multi daylight presses. This makes the small ContiRoll suitable as greenplant investment or, as a replacement of an old multi daylight press.

In addition, the popular asian board sizes 4’ x 8’ as well as 4’ x 9’ can be produced directly, making the need for a cut-to-size line obsolete, and suited for the markets of Brazil, Russia, India, and China.

installing Siempelkamp’s ContiRoll at Zhejiang liren Wood industry in

jiang Shan City, Zhejiang province in southeastern China.

installation of the frames

View of the drives

Discharge bunker and former head

press infeed area with steel belt

Roller rod carpet inside the press infeed

GReCon: ultRaSoniC meaSuRinG SyStemGrecon’s blow detection system uPu, type 3000, is billed the only ultrasonic measuring system with automatic calibration. The ultrasonic transmitters and receivers are adapted to the product to be measured, and the measuring signal is evaluated in high resolution.

automatic external calibration and the integrated dirt accumulation control see to a measurement that is, to a large extent, independent of surroundings. The calibration adjusts the individual inspection channels and makes possible a reliable blow detection and representation of process-related differences over the entire panel.

a DC long-time graph gives information on the homogeneity of the panels. Further curves represent fluctuations in different process influences, such as moisture, weight per unit area, hardening degree of the glue (press time) and steam pressure.


Product highlights

Heradesign: Wood Wool decorative Panels

Modul systeMe: glue PreParation & dousing systeMsIndependent engineering firm, Module Systeme, provides technical services and equipment for the particleboard and fibreboard industry as well as for lamination lines for wood based panels.

The Laufen, Germany based company has launched a line of standard and custom designed glue preparation and dosing systems for plants in the wood based panel industry. The offered systems are available for single component stations up to multiple, networked stations. These modular glue preparation systems fit into standard shipping containers.

Wagner systeM: roller-Mini stoPTheir strongest point is their invisibility: placed in the bottom plate or the leg of a furniture, the Roller-Minis by Wagner System of Lahr, Germany, do not disturb the furniture’ s design and gives elegant mobility, all without the optical dominance of visible castors.

Introduced at interzum 2009, the latest version comes with an integrated brake and offer a load capacity of 50 kg each at a 15 mm. available in two floor-protecting varieties (soft wheels for sensitive floors and with hard wheels for robust floors), they have been awarded with the red dot design award 2009 for their design quality.



austria headquartered manufacturer of wood wool decorative panels, Heradesign, has expanded to cater for the premium, luxury market with its acoustically-superior executive product line.

The executive range comprises Heradesign Style and Heradesign Deluxe, offering a choice between real wood veneer and high-quality lamination. The Deluxe range is ecologically sound, with a wood-wool core and real wood veneer.

Heradesign (formerly part of Heraklith aG), is now part of Knauf Insulation GmbH. Its products offer architects and planners a variety of design possibilities for many different applications, from public buildings, offices and nurseries through to major event venues.

trada: guide on cross-laMinated tiMberThe first of three electronic guides for specifiers and designers on cross-laminated timber has been launched by TRaDa.

The Wood Information Sheet on cross-laminated (CL) timber, reviews how CL is manufactured and machined, its material properties, common structural configurations and general erection principles.

although CL timber is commonly used in Continental europe, it is a relatively new product for many parts of the world. early applications show that CL panel construction can be competitive, even in tall and long-span applications where conventional timber framing was before considered unsuitable or uneconomic.

The new Wood Information Sheet provides an overview of the applications and benefits of using cross-laminated timber, highlighting non-structural aspects of design, airtightness, acoustic performance, cladding, durability/finishes and sustainability.


Focus

SETTING THECaRB:

STANDARDS

I n the uS, the California air Resources Board (CaRB) approved an airborne Toxics Control Measure (aTCM) to

reduce formaldehyde emissions from composite wood products that come inside its borders to record low levels.

The measure has broad impact on the asian woodworking industry given that it regulates formaldehyde emissions from any composite wood products – hardwood plywood, particleboard, medium density fibreboard (MDF) – as well as all finished goods containing these products that are sold, offered for sale, supplied or manufactured for use in California, the third largest state in the uS.

In addition, it applies to the entire

California has passed a strict air-quality measure that has significant ramifications for the woodworking industry on the opposite side of the Pacific Ocean – and beyond. By Jason Wang, GM, Franklin Guangzhou Adhesives

composite wood products supply chain, from manufacturers to distributors, importers, fabricators and retailers of these products or finished goods constructed of them.

Given the reach of this latest aTCM and the fact that the first phase went into effect at the beginning of year – with an additional stringent standard coming on line in July (for hardwood plywood composite core) – it is critical for composite wood products manufacturers and other links in the wood products supply chain to understand the new formaldehyde-emissions regulations.

Forms Of FormaldehydeKnowing a bit about formaldehyde can

help manufacturers understand the need for formaldehyde-emission standards and how to meet them.

Formaldehyde is a colourless, pungent-smelling gas that can be a severe irritant, causing watery eyes, burning sensations in the eyes and throat, nausea, even difficulty in breathing.

It also is a possible carcinogen. yet, it’s a daily part of life – just as are automobiles, lumber and common consumer products, such as carpeting. It is manufactured in large quantities and sold as a liquid for use in literally thousands of common consumer products, from cosmetics to disinfectants to home furnishings. It also is formed in its natural state when hydrocarbons

Air R

esources B

oard

Patrycja C

ieszkow

ska, Szczecin, P

oland

R. L

ind

er, S

pri

ngfie

ld, U

SA


Focus

break down, as when gasoline burns. Of more significance to the wood

products factories, formaldehyde also occurs in nature when plant matter decays. Hence, even untreated wood will contain some formaldehyde. Manufacturers want to take this phenomenon into account when selecting adhesives for their composite wood products.

Meet The StandardsTo give the wood products industry time to meet reduced formaldehyde-emissions standards, CaRB is phasing in increasingly stringent limits. Phase 2 will further tighten already low limits set in Phase 1. Limits and effective dates for both phases are below.

Phase I Emissions Standards By January 2009:

Hardwood Plywood-Veneer Core = 0.08 ppm Particleboard = 0.18 ppm Medium Density Fiberboard = 0.21 ppm

By July 2009:Hardwood Plywood Composite Core = 0.08 ppm

Phase 2 Emissions Standards By January 2010:

Hardwood Plywood-Veneer Core = 0.05 ppm

By January 2011:Particleboard = 0.09 ppm Medium Density Fiberboard = 0.11 ppm

By January 2012:Hardwood Plywood-Composite Core = 0.05 ppm

Manufacturers of composite wood products must demonstrate compliance with the new standards through certification by an independent, third

party certifier, approved by the air Resources Board (aRB). Testing must be performed according to aSTM e1333 (Large Chamber Test Method).

Beyond third-party testing, manufacturers must label their hardwood plywood, particleboard and MDF panels to identify them as meeting either the Phase 1 or Phase 2 emission standards or as being made with no-added-formaldehyde (naF) or ultra-low-emitting-formaldehyde (uLeF) resins.

as mentioned, CaRB regulations affect every link in the composite wood products supply chain. Distributors, importers, fabricators and retailers can purchase and sell only panels and finished goods that comply with applicable formaldehyde-emission standards and must take ‘reasonable, prudent precautions’ (such as communicating with their suppliers).

ENQU

IRY

NO.

036


Focus

clearly showed that polyvinyl acetate, soy-based and MDI based adhesives had negligible levels of formaldehyde, if any, during the chamber testing. This standard allows manufacturers of hardwood plywood who use naF- or uLeF-based resins to submit an application for an exemption from the requirements of section 93120.3 (b).

While formaldehyde-free adhesives are preferred over other adhesives to meet the new CaRB standards, it is not mandatory that all adhesives used be formaldehyde-free. an ultra-low-emitting adhesive could pass the strictest limits of the new CaRB restrictions.

One key consideration, however, is that chamber testing is performed on wood with the adhesive – not just on the adhesive itself. as noted earlier, the wood often naturally contains some amount of residual formaldehyde. By using a formaldehyde-free adhesive, a manufacturer can eliminate the

possibility that the adhesive would add formaldehyde emissions to existing emissions already in the

composite wood. It provides the assurance that the adhesive is not

going to contribute to the testing results.

Franklin Adhesives & Polymers, a division

of Franklin Int’l, has developed several

formaldehyde-free adhesives.

One of these is Multibond 4000

FF, a one-part PVAc adhesive that is

both water-resistant and formaldehyde-

free. Reactite EP-925, a two-component

emulsion polymer isocyanate (EPI), has

zero formaldehyde and also offers a high

degree of heat- and water-resistance.

FreeForm is a new FSC-certified particleboard that is produced with no added urea-formaldehyde.

A melamine-formaldehyde binder is used rather than industry-standard urea-formaldehyde.

Initial chamber testing has shown formaldehyde emissions to be in the range of 0.09 to 0.13

parts per million which meets the recently announced Phase I California Air Resources Board

(CARB) standards for formaldehyde emissions—but not the Phase II standards. However, the

company anticipates that FreeForm will meet Phase II standards within

the year, and it hopes to eventually eliminate formaldehyde-based

binders altogether. All FreeForm particleboard carries the Forest

Stewardship Council label.

While low-formaldehyde particleboard

made with phenolic binders is darker than

conventional UF-particleboard (due to the

reddish colour of phenol-formaldehyde),

FreeForm is lighter in colour, because melamine

binder is white.

Franklin: Formaldehyde-Free adhesives

Collins Companies: pine FreeForm

to ensure that these products meet CaRB limits.

Distributors and importers also need to keep records showing the date of purchase and the supplier of the product(s); and they must document steps taken to ensure that the products are in compliance.

Fabricators also must label finished goods containing CaRB-regulated composite wood products to indicate that the merchandise complies with applicable Phase 1 or Phase 2 emission standards.

Finished goods made exclusively from composite wood products manufactured using naF- or uLeF-based resins must also be labelled.

Add The Right Adhesivealthough the latest CaRB aTCM regulates formaldehyde emissions, not adhesives, the choice of adhesive is paramount to meeting emissions limits.

Research conducted during the promulgation of the CaRB measure

ENQUIRY NO. 4107

ENQUIRY NO. 4106

ENQUIRY NO. 4108

Build

ingG

reen.com

ENQUIRY NO. 063


Focus

ALL For ONE & ONE For ALLGrass:

G rass, the new global brand, combines the product portfolios of Mepla-alfit, Hetal and Grass. The amalgamated company exhibited their various

product innovations under a united Grass brand for the first time in Interzum 2009, Cologne, Germany (May 13 – 16).

Its product range aims to set new trends and reinforce existing ones, such as handle-free operation, motorised systems and design freedom.

On the tie-up of the companies, Florian Hettich said: “By making the Hetal brand part of the Grass brand we are in a position to offer our customers one of the most comprehensive ranges of furniture fittings. Likewise, the existing Grass range is extended by our core products, ie: flap lift fittings, corner cupboard fittings and suspension systems for wall cabinets.”

This will enable them to supply a wider range of furniture fittings from one source. He adds: “By combining our product ranges under one brand name we are able to step up the scope and quality of our customer service quite significantly. now furniture makers can use the whole product range of the Grass brand to distinguish their products for their customers and to position themselves accordingly.”

Furniture makers benefit as Mepla-Alfit, Hetal and Grass come under one united fittings brand.

Subsumed Under Grassas to the changes that has taken place, Mr Hettich says: “From Interzum 2009 we will be distributing all products under the Grass brand. For the purpose of export we have already integrated our distribution structure into that of Grass to a large extent so that

our export customers already buy their fittings from one supplier.” after Interzum, all products will be subsumed under the Grass brand name.

Innovation is one of the major points in the company strategy. There are several development projects that aim to provide solutions for its customers. “Throughout the whole value creation chain, from the furniture makers, the trade, the fitters through to the final customers we want to create excitement,” adds Mr Hettich.

When asked what can be expected from the merger with Grass, he says: “One of the main considerations in this merger is the expansion of our export sales. By

joining our two distribution organisations we are able to increase our activities in the market considerably and offer our customers the necessary advice and service. The second important aspect is the craft-based trade. The Grass brand is well known worldwide in

Florian Hettich: “For the purpose of export, we have already integrated our distribution structure into that of Grass.”


this trade, a fact that can be exploited by our trade partners in the respective markets. as Hetal, we were simply too small to be able to establish a brand in the respective export countries.”

For Hetal and Grass, the Interzum exhibition was the starting point for a shared future, “which we will shape successfully together with our customers,” adds Mr Hettich.

History In The Makingnovember 2007 saw the merger of Grass and Mepla-alfit, even as it simultaneously took over Hetal. The subsequent 18 months saw the formation of the premium Grass brand.

The merger of the two companies and streamlining of the range of fittings were finally concluded in august 2008. Its international sales and distribution activities were merged as well as restructured to offer customers in 55 countries a more direct contact. Today, the Group employs a staff of more than 1,900 spread over 12 sites throughout the world.

Hetal, the Vorarlberg-based company and specialists in the corner cabinet fittings, flap fittings, single-axle object hinges and cabinet suspension systems, will remain an autonomous enterprise, although sales and distribution will be carried out through the Grass brand. FDM

ALL For ONE & ONE For ALL

Focus

ENQUIRY NO. 4101

ENQU

IRY

NO.

009


Focus

EnErgy SavingSurface Drying:

Uv CUring

P aint coating or liquid coating technology, as it is increasingly being referred to, along with

foil coating and direct printing, ranks among the most sophisticated surface treatment technologies available today.

Depending on the application, the coating hardware on offer ranges from compact, stand-alone machines to fully automated, high-performance coating lines. at the usual component widths of between 0.4 to 2.4 m, these can easily achieve feed speeds of up to 120 m per minute.

In the furniture industry, conventional nitrocellulose and polyurethane lacquers still have a market share of around 50 percent. and in the wood trade, this figure is likely to be even higher. However, there is a worldwide trend towards more environmentally-friendly alternatives that have a lower or no organic solvent content.

A Question Of ExposureIt is in this area that radiation curing technology really comes into its own. Here, paint coats on furniture are hardened by exposure to ultraviolet (uV) light or electron beams. For this reason, water-soluble

Uv-drying processes consume 45 percent less energy than their conventional counterparts. By Frederick D Muëller

lacquers that are suitable for radiation curing are regarded as the way of the future for furniture paint coating lines.

not only are these lacquers largely organic-solvent free, they are also superior to conventional solutions in terms of end-product quality, cost, and environmental friendliness. Today, point lines feature up

uV-curable lacquers consist of liquid compounds that transform almost immediately into a dry, solid paint coat when exposed to a high-energy source of uV radiation. The paint hardens in a very short space of time, depending on feed speed, the number and intensity of uV lamps as well the material substrate.

The end result is a dry, firm paint film, comparable to ultra-thin synthetic foil. The short drying time produces an even, true-colour finish, rendering subsequent powdering unnecessary. It also allows an immediate determination of end-product quality since there are no further changes due to drying. uV-curable paints are solvent free, eliminating the toxic fumes produced by conventional drying processes.

Traditionally used solvent based coatings contain volatile organic compounds (VOCs) and can pose health and safety risks for finishers as well as end-users. The absence of VOCs in uV coating improves customers’ indoor air quality as well as work place safety. an additional safety concern with solvent based coatings is the risk of fire. Higher flash points of uV coatings provide low flammability.

Because the coated components are already totally dry, processing can

to 90 percent lower emissions than their counterparts of only a few years ago. Paint consumption of modern lines has also been significantly reduced.

For these reasons, investments in new liquid coating technology can be amortised within a year.

ultraviolet technology can drastically reduce energy and material costs.

New liquid coating technology can be amortised within a year.


Focus

continue without interruption, significantly boosting productivity.

Reduced ConsumptionModern uV-drying processes consume 45 percent less energy than their conventional counterparts. uV lamps have a service live of at least 120,000 hours. Since a surface temperature of only around 40 deg C is required for uV curing, energy consumption is significantly reduced, as are any adverse effects on the manufacturing environment, including the components being processed.

Compared with conventional application methods, such as manually operated spray guns, tray trucks or rack dryers, uV systems use 90 percent less paint. a uV-curing line that applies about 40 grms of paint per square metre produces comparable results to a polyurethane spray line applying around 250 grms per square metre.

If paint losses during spraying are included, this amount can easily double. However, good surface preparation is as important when using uV systems as it is in the case of other paint application methods: an evenly sanded surface will save on unnecessary, extra processing steps and therefore reduce costs. FDM

How UV CUring worksBy UV Doctors Inc, Maryland, USA

In its most basic form, UV curing involves a photo-chemical reaction which converts a liquid

or semi-liquid organic compound to a hard plastic-like polymer. The heart of this reaction

is a special compound, known as a ‘photoinitiator’, which absorbs light and then uses the

absorbed light energy to initiate and propagate the curing reaction.

Unlike conventional drying processes which use heat to evaporate water or solvents from

a material, UV curing involves a total conversion

of liquid material to a solid state. This lack of

solvents makes UV curing an attractive alternative

in cases where solvent emissions must be reduced.

The hard plastic-like cured polymer has superior

physical properties (such as abrasion-resistance,

gloss, and chemical resistance).

The UV curing process is very fast, usually

completed in fractions of a second. This means

reduced space requirements and a decrease in Work In Process. Racking or secondary

drying operations are eliminated with UV curing. In many cases, quality can be improved

through the elimination of surface blemishes caused by contact between a partially dry ink

or coating and another surface.

Any UV curing process requires a UV light source and a coating specially formulated

for the UV curing process. Both the light source and the UV curable material are normally

designed for each specific application.

A finishing system that meets increasing green requirements is now available from US-

based manufacturer of finishing equipment, DV-Systems.

For improved finishing results, the CVS includes sanding units on its infeed conveyor. A

motorised roller conveyor with centre adjustable guides and hold-down wheels provides the

infeed. Sanding brushes or belt sanding units can sand and denib up to four sides of the profile.

Various sizes and features allow for an accurate match with wood workers’ finishing

needs. The small CVS3 model features feed speeds of up to 75 fpm and cures clear or tinted

UV. The medium CVS7 machine can finish at up to 150 fpm and the advanced CVS9 model

provides rapid finishing at up to 200 fpm. Both

CVS7 and CVS9 can be customised

to cure clear, tinted

and even

pigmented

UV.

The short drying time produces an even, true-colour finish, rendering subsequent powdering

unnecessary.

ENQUIRY NO. 4103

ENQUIRY NO. 4104

ENQUIRY NO. 4105

Product HigHligHtDV-systems: CVs UV FinisHing system


Technology

nested-Based Manufacturing:

BoostingThe Process

N ested-based manufacturing (nBM) is a mass production process that attempts to minimise material

usage with prior planning in cutting and machining of parts from flat raw materials.

In wood-based products, the nesting process usually involves optimising the usage of panels by arranging the parts such that minimal area is left unused.

The high degree of sophistication usually requires the use of nesting software to analyse the shapes of the parts to be produced at a particular time.

Software algorithms usually consist of several features, such as redraw suppression, true shape nesting and edge gap fitting. Simply suppressing the drawing of each sheet until the nest is complete improves nesting speed, especially when running very large nests.

Revamped & ImprovedTrue shape nesting means that actual geometric details of the part are taken into consideration while nesting. no approximation as a rectangle or any other simpler shapes is made while nesting parts on the sheet. It enables interlocking of parts, recognition of arbitrary shaped sheet and part geometries, and holes present in the sheet.

edge gap fitting allows for even closer nesting where parts have multiple passes with different tooling. Most software can also read IGeS or DXF profile files automatically, while some have in-built convertors.

The Plus 2D nesting software is a typical example. It generates two dimensional cutting processes and optimum layouts for cutting. Its algorithms generate optimised cutting plans for cutlists and also nC codes for CnC beamsaws, panelsaws, cutting tables and other tools.

Other features include multiple stock and multiple part nesting, integrated customer and order entry database, material and part assemblies library, support for saw blade thickness, grinding margins and cut complexity, support for non-rectangular

Recent additions in nested-based manufacturing include improved algorithms, flexible CADCAM file import capabilities, product lifecycle modules and better machining communications. By Augustine Quek


parts via DXF import, re-nest option, rings, racking and pattern amendment module.

another example is product lifecycle management (PLM) services and technology company Geometric Software Solutions’ nestLib Library. nestLib is known for its robustness, and is used to optimise material utilisation while fitting two-dimensional shapes on flat panels for cutting machines.

The nestLib portfolio consists of a base module and a set of optional advanced modules, each of which provides specialised functionality. It includes optimised, high speed and robust algorithms for fully automated true shape nesting, as oppose to simple block nesting.

nestLib is also able to perform what is known as “adaptive nesting”, which is the ability of the interfacing application to influence the nesting results. nestLib can communicate with the interfacing application during the nesting process when it finds a location for a part orientation. This call is made for each orientation (rotation angle) of the nested part.

The application can then evaluate all the locations and either selects the current orientation or continue nesting till all the orientations are tried and then accept one of the nested orientations. It can even reject all the nested locations and continue nesting with another part.

nestLib is available as a static library, dynamic linked library (DLL) and COM DLL, and also supports .neT framework. nestLib is available on Microsoft Windows, Sun Solaris and Linux platforms, and can be ported to Mac OS on demand.

Geometric claims nestLib is used by

machine tool manufacturers, companies providing CaD/CaM solutions, leather industry, wood working, wood engraving industry, construction industry, agricultural equipment manufacturers and engraving and sign making industry, among others.

Soft & Hardware CombinedSince nesting is to prepare the raw material for processing, many wood-processing machines also have in-built nesting software that coordinates with the hardware in part production.

Some innovations come from PCD tooling specialist Cruing (uK), which has two new advanced tools for high speed and cleaner CnC nesting. Cruing has developed nexus and aerotech as part of nesting+, an advanced technology tooling programme.

nexus combines two components, highly resistant tungsten alloy head and precision ground steel shank, to produce a high productivity full speed single operation nesting tool. The parts are positioned, interconnected and locked together using the patent ‘Q-Lock’ system. With only a 12 mm minimum diameter, cutting resistance is reduced, allowing feed speeds of up to 20m/min without strain on the electro-spindle.

as the tungsten alloy head is an excellent heat conductor, operational-related heat is conducted away from the sheet material and brazed PCD tips. according to Cruing, longer tool life is achieved as the use of tungsten alloy allows nexus to withstand intensive

Technology

Suppressing the drawing of each sheet until the nest is complete improves nesting speed, especially when running very large nests.

ENQU

IRY

NO.

064

Benchmark solutions for

all your cutting needs

• From the individual

cut-to-size saw to

the most advanced,

large-scale cutting

plant solution

• From furniture

production to board

industry

• From comprehensive

planning & logistics

support to 24/7

after-sales service

• From the most

respected European

manufacturer to the

most reputable

customers in Asia

[ output ]

The full scope of

panel dividing technology!

Schelling (Changzhou)

Trading Co., Ltd.

16 Keji Avenue, Longhutang Town

New District

Changzhou, Jiangsu 213031

Tel.: 0519 8576 0858


www.schelling.com

support to 24/7

after-sales service

• From the most

respected European

manufacturer to the

most reputable

customers in Asia

LIGNA 2009 Hannover

18. until 22. May 2009

hall 26, stand D73


Technology

With basic dimensions of 3900 mm in the X-direction and 1950 mm in the Y-direction, Holzher’s

Dynestic 12.6 G is capable of handling exceptionally large panels.

The heavy-duty vacuum pump with capacity of 250 m³/h, optionally 500 or 750 m³/h, holds

work down on the grooved Dynestic matrix table with high suction force. The welded basic

machine body supports the travelling gantry which can be moved uniformly on dust protected

recirculating ball sliding shoes running in surface-hardened linear guides.

The machine software with its open architecture allows for connectivity to all branch programmes,

design and CAD/CAM solutions, particularly in regard to nesting programmes. The Windows-based

graphic user surface is laid out to ensure intuitive control of the individual programmes.

In conjunction with the HHPDE (Holzher’s process data acquisition) software, time-based and

calculatory monitoring of the individual jobs

as well as feedback to the

machines are possible

at the parts level for

processing times, running

metres and edgebanding.

mechanical stress, far more than steel.another Cruing tool, the aerotech

nesting tool, assist the CnC machining centre’s dust extraction system by removing MDF dust and residual material from the nested grooves during operation. Total dust removal is generally achieved at 18,000 rev/min at 15 m/min feed and 24,000 rev/min at 20 m/min feed. aerotech provides single operation high speed nesting up to 15 m/min. In addition, cutting pressure is reduced, causing less strain on the electro-spindle. Cruing also claims that in certain circumstances the aerotech makes it unnecessary to have larger, more expensive extraction systems.

Stroking PrecisionCnC machining centre and software specialist Masterwood has introduced a 3-axis entry-level machine designed for fast and accurate panel nesting. The MW 1836 features a matrix table measuring 3900 x 1900 mm combined with a router with a maximum stroke of 3600 x 1800 mm, enabling it to deal with large sizes. The 8 kW router is equipped with a 12 post carousel tool changer and the machine also incorporates five vertical drills in the X and five in the y axis, and a 250 cu m/hour vacuum pump.

Masterwood’s own Masternest CaD/CaM package is used in MW1836. This purpose-designed software carries out all the necessary nesting calculations and then automatically creates the machining programme. Masterwood claims that the machine does away with the need for a panel saw, as all the cuts can be made on the machining centre.

Many wood product companies justify the purchase of new machines based on greatly improved material yields. Thus, machines with nesting capabilities would be highly favoured. nesting not only reduces wastage, it also reduces the need for multiple machines and accessories, thereby reducing both recurring costs and capital investments. FDM

Biesse’s Rover B7.40 FTK line is the new entry level,

affordable, 5 x12 machining centre designed for nested

based manufacturing and solid surface machining.

Compact in design, the Rover is suited for

use in shops with limited floor space. Offering

fast, on-the-fly 10 position tool changer, and a

completely see-through head cover, the Rover comes with a 16HP electrospindle and a centralised

lubrication system.

Biesse: entry LeveL rover

Geometric: nestLiB 2009 r1Nestlib 2009 R1 is a product

extension to the existing nesting

libraries software series developed

by Geometric of Mumbai, India.

The nesting algorithms

have been parallelised to take

advantage of multiple processors

available in multi-core machines. Users can experience nesting time reduction up to 40 percent

on dual core machines and up to 70 percent on quad core machines.

Inclined guillotine cut feature make it possible to have end-to-end inclined guillotine cuts for

non-rectangular parts. Parts and sheets of different materials and thickness can be added to the

same nesting order. NestLib will automatically select and nest parts with relevant thickness and

material on the corresponding sheets. NestLib libraries now support Microsoft Visual Studio 2008.

HoLzHer: nestinG tecHnoLoGy For LarGe PaneL Formats

ENQUIRY NO. 4202

ENQUIRY NO. 4203

ENQUIRY NO. 4204

Product HigHligHts

ENQUIRY NO. 4201

FW2009 EXH_AD_20.5x27.5.indd 1 11/3/08 10:51:53 AM

ENQUIRY NO. 002


Technology

TIMBERCross-Laminated

A lthough cross-laminated timber (CL) is commonly used in Continental europe, it is a relatively new product in many parts of the world. yet early applications show

that CL panel construction can be competitive, even in tall and long span applications where conventional timber framing was hitherto unsuitable or uneconomic.

Made by laminating lengths of timber, CL is the main form of solid wood panels (not all solid wood panels are cross-laminated). Wall, floor and roof elements can be pre-cut in the factory to

This introduction for specifiers offers an overview of the applications and benefits of using cross-laminated timber as well as design issues. Contributed by TRADA

any dimension and shape, including openings for doors, windows, stairs, service channels and ducts.

The structures offer high thermal, acoustic and fire performance to satisfy ever-tougher building regulations. CL buildings have a very low carbon footprint because the wood locks away the carbon absorbed during growth. Wood is easy to machine and the material itself is a good insulator. CL is currently imported from Germany, austria and Switzerland.

The Jumbo PlywoodCross-laminated timber panels have three, five, seven etc layers stacked on one another at right angles and glued together in a press over their entire surface area. each layer is composed of softwood boards (of varying lamination thickness) glued together. Sometimes offcuts are used. The build up is symmetrical around the middle layer.

although it looks like ‘jumbo plywood’, CL is a structural product. Panel thickness is in the range 50–300 mm, but panels as thick as 500 mm can be produced.

These large solid panels form walls, roofs, floors, and even lift shafts and stairs. The building envelope can be easily clad with other materials such as timber, brick, mineral render or composite panels. CL could be considered where masonry, concrete and steel would be ‘normal’ forms of construction.

although CL has a promising future in multi-storey construction, it is likely that low-rise non-residential buildings will be its main application

CL is suitable where an internal exposed timber surface offers an aesthetic or acoustic benefit, such as exhibition spaces, places of worship, sports halls, theatres and dwellings.

The practical and current code limit for platform timber frame is seven storeys. In contrast, CL is a solid panel, capable of resisting very high racking and vertical loads, and is not limited in height by any building code.

Manufacture & Pre-Processing Various adhesives are used to bond together the laminates. Formaldehyde-free panels are available. If glue specification is critical, check with manufacturers.

Panels can be manufactured with their outer layers orientated in either direction relative to the production length. When specifying to minimise offcuts and waste, consider the manufacturer’s preferred production sizes and transport limitations.

Panels can be up to 20m long and 4.8m wide


Technology

but transport constraints normally govern panel size. Some suppliers offer curved panels with a minimum radius of 8m.

• MachiningThe manufacturers have various methods of joining adjacent wall and floor panels on site including rebates, notches and half-lapped joints in the edges of the panels.

Panel rebates and openings are cut by computer numerical controlled (CnC) routers. Manufacturers can incorporate cut-outs for windows, doors, ducts and chases in the factory.

as with all pre-fabricated methods of construction, a design freeze is essential in order to ensure that all openings are correctly incorporated into the panels. avoid late modifications to openings or additional service runs. Modifying panels on site can be costly and time consuming and may affect their structural integrity.

Typical Material PropertiesProperties vary according to the manufacturer and basic materials. Wood is normally spruce, but larch and pine may be available.

The common strength grades for the laminates are in the range C16 to C24 and at least one manufacturer offers glulam grades GL24H to GL28H. Moisture content (MC) at delivery is typically 8–14 percent.

Designers will find that working stresses are low due to the large cross section. Classification of the surface quality of the panels follows BS en 13017-1. CL can be supplied for visible or hidden applications:

• Standard Grade (or non visible quality)Surface is suitable for lining and typically has top layers corresponding to Class C.

• Interior Grade (or residential visible) Surface is suitable for exposed residential internal structure and typically has top layers corresponding to Class aB.

• Interior Grade (or Industrial visible) Some manufacturers have a third grade, Interior Grade (or Industrial visible) surface that is suitable for exposed industrial internal structure and typically has top layers corresponding to Class BC.

Surfaces are supplied either sanded or planed, depending on manufacturer. The density depends on the timber species and is typically in the range 470 kg/m3 (spruce) to 590 kg/m3 (larch) at 12 percent MC.

CL panels have been used in:structural and non-structural wall elementsmulti-storey structures with or without concrete substructuresolid partitions, with and without liningsfloor (ceiling) elementsparapet wall elements formed from balloon framed wall panel elementsroof elementsroom-in-the-roof sloping panelscantilevered floors, eg balconiescurved load-bearing structureload-bearing lift shaftsstairs

• External Walls external non-load bearing walls comprising highly insulated panels. In this form, CL floor panels span parallel to external walls so that external walls can be highly insulated non-load bearing ‘infill panels’. Take care with potential differential movement between the load bearing and infill panels.

-----

------

Eight storeys of apartments featuring cross-laminated timber panels.


Technology

• Floor & Roof ComponentsTimber frame walls or concrete or masonry basements may support CL floor slabs where a thin floor section is needed.

However for low-rise construction, the increased load-bearing capacity of CL wall panels may offer no structural advantage over conventional stud framed walls, but the appearance may be preferred.

For basement construction, a concrete or masonry structure should also be provided below external ground level with the CL floor slabs bedded onto mortar and DPC at least 150 mm above finished ground level.

engineered timber floor structures. These can also be combined with CL wall panels where a lightweight floor/roof structure is more appropriate or where an exposed CL wall panel is an aesthetic requirement.

• Composite Timber/Concrete FloorsCL floor slabs can also be used to form wood/concrete composite floors, where the CL slab is used as a permanent formwork with horizontal shear transfer between materials being provided shear plates and screws.

• Hybrid CL productsThese include:

Lenostrand (Finnforest): a cross-laminated OSB productLeno K (Finnforest): a cross-laminated product containing a central layer of Kerto laminated veneer lumber (LVL).

Design Principles• Building servicesPanels can incorporate pre-formed service routes for small services such as electrical wiring. These may be routed through the rebates at the interfaces between two adjacent panels or be drilled and rebated into the panels to order.

Services may also be routed in chases on the surface of the panels which are pre-milled into the panels in the factory.

early coordination with the architect and building services engineer is essential to take advantage of this service. alternatively, building services may be routed in a cavity formed by a layer of plasterboard fixed to battens on the face of the CL wall or a suspended ceiling supported from the underside of floor panels.

• Thermal performanceThermal mass can reduce the variation in temperature over the daily cycle, although other factors such as ventilation, solar gain and insulation must be taken into account.

Important properties are thermal conductivity (rate of transferring heat) and specific heat capacity (ability to retain heat). For example, CL and lightweight concrete block materials have a similar thermal conductivity while CL has a greater

020

4060

8010

0H

eigh

t (m

)

5 10Span (m)

Concreteframe

Steelframe

Cross-laminatedtimber Masonry

Platformtimber frame

Figure 2: Span and height capabilities of mainstream structural materials in multi-storey buildingsSpan and height capabilities of mainstream structural materials in multi-storey buildings.

--

Supplier Origin Product

Eurban Switzerland Crosslam timber panels

Finnforest Germany Lenotec

James Jones & Sons Austria BBS

KLH Austria KLH solid timber panels

Stora Enso Austria CLTSuppliers and products in the UK

ww

w.w

illp

ryce

.com

CL timber panels used as loading walls and floor ‘slabs’.


Technology

specific heat capacity. Therefore, a 70mm CL panel has a thermal mass similar to 100mm lightweight block.

unlike conventional timber framing alone, CL makes a contribution to the u value. For example, a 100mm CL panel of density 500 kg/m3 has â value 0.13 W/mK. Designers must assess the risk of condensation. a well ventilated cavity and ‘breathable’ insulation will be needed.

• AirtightnessThermal performance will be compromised if the construction does not achieve adequate airtightness. Because CL construction would not normally include a vapour control layer, the system relies entirely on the detailing of joints to achieve airtightness.

Joints that are merely screwed together may suffice but this will depend on ‘true’ surfaces and good workmanship. airtightness is normally achieved with either pre-compressed foam tape within the joint or breathable tape across the outside joint. Pre-completion testing may be needed to demonstrate compliance.

• Acoustic PerformanceWhen considering sound transmission through party walls, CL panels are more similar to lightweight masonry construction (where the mass of the wall contributes to the acoustic performance) than timber frame wall panels.

Consult manufacturers for tests on various configurations. In the absence of test data, it is safe to conclude that CL walls with plasterboard (similar to what would be used on

timber frame walls) will provide acoustic performance well in excess of what the Building Regulations require.

When protecting against external noise, designers may take account of the acoustic resistance of the CL, although the transmission via the windows may dominate. Consult manufacturers for tests on various configurations.

Durability, Finishes & SustainabilityDurability of CL panels will depend on the timbers used for its manufacture and the level of exposure to the weather.

Heartwood durability is: for spruce, not durable – slightly durable; for pine, slightly durable – moderately durable; or for larch, moderately durable. Sapwood portions are not durable against fungi or wood boring insects.

Since both sapwood and heartwood are present in CL, panels will be liable to decay if their moisture contents exceed 20 percent for an extended period of time. Therefore, it is important that these timbers are not exposed to continuous wetting by providing a drained and vented cavity behind cladding.

Structural timber must be at least 150 mm above finished ground level. CL panels are not suitable for long-term external exposure and a separate cladding system is necessary.

Check that the wood used in CL panels is from managed, sustainable forests. Manufacturers supply chain of custody certificates under the FSC or PeFC schemes.

at the end of the building’s life, the CL panels may be suitable for re-use or recycling. The untreated wood and the glues used in CL panels make the product suitable as a biomass fuel. FDM ENQUIRY NO. 4211

ww

w.w

illpryce.comEasy fixing of services to ceiling.


Panels

A composite material that combines wood veneer with fibreglass offers product variation and utilisation for furniture manufacturers. By Dr Hamdan Husain, Forest Research Institute Malaysia

S carcity and shortage of raw materials have caused problem to the wooden furniture industry. In response, more research is

now being directed towards timber composites. Research and development (R&D) conducted by the Forest Research Institute Malaysia (FRIM) involved designing composite to be used in an innovative, yet economical way.

Timber exudes warmth and homeliness resulting in wood-based furniture being preferred by the market. To continue enjoying and owning this natural material (especially in the market of escalating prices) requires developing an alternative that retains the characteristics and appearance of natural wood.

Fibre-ReinforcementOne promising option was developed by FRIM Timber Design unit and their team members, in the form of a composite that combined wood veneer with fibreglass. The study aimed to develop a thin, lightweight yet strong wood veneer reinforced with fibreglass panel.

The material is known as roving bi-directional glass fibre-reinforced (GFR’s) which, when combined

strongLIGHT BUTWood Meets Glass Fibre:

FRIM researchers with their inventions.


Panels

with veneer serves as reinforcement to the panel. The composite panel in the R&D project (referred as plywood) is produced by bonding thin wood veneers together using thermal setting resins under pre-determined heat and pressure.

By reinforcing the plywood with GFR, this product was able to achieve the ultimate strength and stiffness required. The project also overcomes the bonding difficulty between GFR and wood veneer, as well as delamination-associated issues.

Tests on design and performance of the composite product showed the superiority of the fibreglass-reinforced veneer product. Low contact angle or high surface wettability of the material provides better adhesion on the veneer, while its strength and stiffness is equivalent to other plywood and wood composites.

Light & EasyWhen tested at the FRIM Furniture Testing Lab, its strength exceeded normal standards whereby the panel remained intact after 100,000 test cycles. a

potentially environmental-inclined material, its formaldehyde emission was proven to be in line with the JaS standards.

economics analysis showed the panel saves about 60 percent on raw material usage. Transportation and handling is easier due to its lightness and easy-stacking features, contributing to its cost-effectiveness.

Given its many potential such as product variation and utilisation, this product will likely benefit the furniture industry. The light material will minimise many design constraints faced by manufacturers and fabricators. FDM

ENQUIRY NO. 4301

Forest Research Institute Malaysia (FRIM)

researchers clinched one gold, three silver

and five bronze awards for their innovations

at the 8th Malaysia Technology Expo (MTE)

2009, the invention and innovation event in

Asia held from February 19 – 21 in Kuala

Lumpur, Malaysia.

The FRIM Timber Design Unit

researchers, led by Dr Hamdan Husain,

received the gold award for the invention

of GFR-V Composite, an engineered wood

product that can be used for furniture as

well as building components.

Compared to other engineered products,

GFR-V Composite saves about 50 percent of

FRIM ReceIves InventIon & InnovatIon awaRds

the raw material apart from being light, strong

and could delay heat transfer.

The three silver awards went to Dr

Aminah Hamzah for low technology non-mist

propagation system for large-scale propagation

of kacip fatima (Labisia pumilla); the group led

by Dr Mohd Khairun Anwar Uyup for phenolic

treated plybamboo and group led by Dr Wan

Tarmeze Wan Ariffin for POPScrim–Parallel Oil

Palm Scrim Lumber.

The inventions receiving the bronze awards

were the development of Essentia–Herbal care

products from Malaysian biofunctional plant

ingredients; internal bond glue sample aligner;

Kenaf OSB; FRIENDS–Friendly environment for

seMInaR on wooden FuRnItuRe IndustRy 2009Forest Research Institute of Malaysia (FRIM) will be organising a Seminar

on Wooden Furniture Industry 2009 (SWFI2009). The seminar, with the theme

‘Competitiveness & Sustainability’ will be held from August 4 – 6 at the Legend

Hotel, Kuala Lumpur, Malaysia.

Discussion will be based on four topics: economics, technologies, marketing

and business as well as policy. The keynote address will be delivered by a

representative from the International Tropical Timber Organization and

various industry leaders. There will also be a special panel discussion

on ‘Challenges & Opportunities Of The Wooden Furniture Industry.’

In line with the seminar theme, a technical visit to a furniture mill

will be organised on August 6.ENQUIRY NO. 4302

expertise networking and document sharing; and

ScrimBAM–Engineered lumber from crushed

and dismantled bamboo strands.


Panels

Waste Not, Want Not

M ajor technological advancements have increased the versatility of wood waste. Forms of wood waste have been recognised and used in ways

such as feedstock reuse to energy production. according to the national environment agency (nea) in Singapore, 71 percent of nearly 270,000 tonnes of wood waste produced were recycled.

Wood waste contains the same primary components of the parent wood: cellulose (40–50 percent) hemicellulose (15–25 percent) and lignin (15–30 percent). Cellulose and hemicellulose are carbohydrates while lignin is a complex, aromatic polymer that forms part of the cell wall structure.

They can be reconstituted in synthetic panels by blending wood particles with glue and pressing under heat and pressure. Composites utilising wood bound to other materials can also be manufactured, which reduces the issue of fibre quality. Several processes exist in producing quality products from recycled wood waste.

Functional products produced from recycled wood waste have the potential to redefine the wood working industry. By Augustine Quek

Reconstituted CompositesThe term ‘reconstituted’ describes a process in which wood waste is broken down into strands, flakes, particles, or fibres and reassembled into new forms with the aid of an adhesive.

Reconstituted wood composites may be constructed from recycled wood waste in the same way as conventionally produced particle-based composites such as oriented strand board (OSB) or particleboard. By utilising various-sized wood particles generated from the waste stream and hot pressing the particles with a conventional adhesive, a variety of panel products can be produced.

an example is Singapore-based LHT Holdings’ technical wood panels. Its panels are made of recycled wood formed through a blend of various species of tropical hardwood wastes. The various woods are blended together with MuF (melamine-urea-formaldhyde) glue and formed under high pressure and temperature. It has a relatively high density of between 650 to 950 kg/m3, depending on the type of product.


Panels

Considerations For Usean important part of particle-based composite panel manufacture is a consistent and homogeneous raw material source to assure uniform panel properties. Because the raw materials being considered here are derived from waste, the many forms and sources of wood waste may pose special processing considerations.

For example, dimensional lumber scrap may be mixed with particleboard trimmings, old pallets, and tree limbs. Therefore, sizes and specie will likely vary, as will the cleanliness of the raw material. Waste wood from demolition sites may be contaminated with lead-based paint, nails, stones, plastic, gypsum, and concrete. In addition to this surface contamination, the wood waste may contain preservative or fire-retardant chemicals.

One promising method of obtaining a homogenous source of raw materials from wood waste is a uK-based process known as Fibresolve (see box for more details). The process breaks down waste wood panels into their component fibres. Through a rigorous process of wetting, steam application, agitation, vacuum and pressure cycles, wood fibres and coatings and be completely separated. The loose fibres have a measured moisture content of between 125 percent to 175 percent, and are thus ideal for wet-forming processes.

Wet-Formed FibresWet-formed fibre products employ a wood fibre/water mixture (pulp slurry). Three basic techniques – moulding, extruding, and laminating — can be used to produce products thick enough for making panels and other building applications. Panels made from wet fibres obtained from the Fibresolve process have displayed similar structural parameters (density, modulus of elasticity, bending strength, internal bond strength, swelling etc) to those made from virgin wood.

another example is Spaceboard, a patented three-dimensional pulp-molding technology developed by the Forest Products Laboratory (FPL), of the united States Department of agriculture, Forest Service.

The production technology has two main methods of forming and consolidating fibres. The first method uses an array of rubber pads attached to a forming screen to

form, densify, hold and restrain the fibre mat during drying or curing. The second method uses retractable porous mandrels to form and consolidate deep thick ribs.

Once formed and consolidated, the fibre mat is removed and dried in subsequent steps similar to the first method. This process readily accepts recycled wood fibres and has the

potential for both curvilinear and three-dimensional solid formed products.

Wood/Plastic CompositesWood/plastic composites (WPC) include those made by binding various recycled

wood waste with recycled plastics, synthetic fibres, and

resins. The powder or fibres are mixed to a dough-like consistency and then extruded or molded to the desired shape.

additives help tailor the end product to the target area of application. The diversity of organic components used in WPC processing can produce a variety of composite products, ranging from inexpensive, low-performance composites to expensive, high-performance materials. Other advantages include being

Wood waste is broken down into strands, flakes, particles, or fibres and reassembled into new forms with the aid of an adhesive.

ENQU

IRY

NO.

059

TM


Panels

The Fibresolve process, a patent of Fibresolve Ltd in the UK, is designed to break

down MDF and particleboard into wood chip and wood fibre and remove the coating

material, leaving intact in sheet format.

It does this by the application of a series of pressure and vacuum cycles to the

panels over a total period of approximately 1hr (Fig 1).

During periods 1, 2 and 3 of the process (Fig 1) the material is rotated within the

reactor and a small amount of wetting agent is sprayed into the reactor during period 1.

Fibresolve: Process & APPlicAtion

Fibresolve cycle at default conditions

001 02 03 04 05 06 07

time (mins)

Atmosphericpressure

pre-plateauvacuum cycle

Period 1 Period 3

Period 2 Period 4

highpressure

vacuum

the Fibresolve reActor

The Fibresolve Process uses an autoclave-based

reactor. The current Fibresolve (MK III) reactor is

a purpose built laboratory-scale, 50kg capacity,

vessel consisting of:

an outer stainless steel cylindrical vessel, 2.1m

long x 1.0m in diameter with a sealable stainless

steel door (Fig 2)

an inner stainless steel tromel, 2.1m long x 0.84m

in diameter perforated with 3mm holes and a

helical screw (Fig 3)

a series of inlet and outlet ports with valves and

gauges for supply of steam and wetting agent,

and extraction of waste liquor and vacuum

•

•

•

Fig 2

Fig 3

Fig 1

ENQUIRY NO. 4304

mouldable, colour stainable, moisture and pest-resistant. Consequently, WPC has now gained widespread acceptance and usage.

Many companies now offer wood/plastic composites. artowood, Thailand’s largest manufacturer of WPC has a patented formulation content of wood, high density polyethylene (HDPe) and thermoplastic (see box for more details).

uK’s ecodeck formula consist of 55 percent hardwood fibres and 45 percent high density, with colour pigmentation system, wetting/bonding agent and ultraviolet light inhibitor package.

Belgian manufacturer Beologic produces ready-to-use compounds ranging from 25 percent to 85 percent of conditioned softwood fibres in a matrix of PVC, PP or Pe for WPC production. These compounds can be freely injected, extruded, or moulded.

Wood/Inorganic CompositesRecycled particles or fibres of wood held together with an inorganic matrix, such as Portland cement and gypsum, form a composite that can be used in many applications. The use of inorganic materials to bind waste wood fibre, chips, and particles has proven to be technically feasible in commercial products such as sound insulation board, gypsum fibreboard, and low-density cement-bonded wood building blocks.

There is no doubt that the environmental movement is causing significant and lasting changes in industry. Material recovery reduces virgin resource consumption and disposal costs. Combination of wood fibres with other materials provides a unique opportunity to utilise recycled waste and low-grade wood fibres. The use of waste wood to form new materials is a trend that is here to stay. FDM

Artowood is the first and largest wood-plastic

composite (WPC) research and manufacturing facility

in Thailand. The in-house research and development

unit – Artowood Innovation Unit, supervises

ongoing tests on improving WPC technologies.

Artowood is termite and fungus proof, fire-

Artowood: wood-PlAstic comPositeretardant, weather resistant, splinter-free and does

not warp when exposed to heat.

This patented formula aims to reduce global

consumption of natural wood by using synthetic

wood to replace and substitute natural solid wood

as a building material.

ENQUIRY NO. 4303

ENQUIRY NO. 4305


Executive Insights

John Chan

True GriT

South-east Asia & Greater China regional director, AHEC

T he american Hardwood export Council (aHeC) is looking into promotions and

seminars in the region “not just to promote the wood, but also promote how to use the wood in the designing of new products,” said its South-east asia & Greater China regional director, John Chan.

This will enable the local manufacturers to “design better products to increase their competitiveness,” adds Mr Chan. aHeC has been promoting american hardwood in asia since 1992 and will continue to do so whatever the market situation. as an example, Mr Chan said the new york-based furniture designer John Kelly was fully sponsored by aHeC to do a seminar in Jakarta and Surabaya in Indonesia, in april for the benefit of the local furniture designers and producers there.

“We can help them create a new product to help them increase the competitiveness of their products,” says Mr Chan. “Interior designers and architects can recreate their entire interiors to their desired preference and style.” as uS

The market this year is going to be difficult at best, but AHEC continues to conduct seminars and activities to enable companies in South-east

Asia to reposition themselves for the coming upturn.


Executive Insights

The exporT council aims To sTrengThen The asian region as a whole wiTh a

slEw of tEchnIcal and dEsIgn programmEs.

hardwood is environmentally friendly and offers diverse applications, the presentation by John Kelly will enable the local craftsmen to expand their design concepts and value-add to their future creations.

Event calendar The export council aims to strengthen the asian region as a whole with a slew of technical and design programmes. Targeted at contractors, manufacturers, designers, and architects, its programme, already well established in parts of South-east asia, provides an educational insight on the further use of uS hardwoods.

“We are conducting more such programmes for the various countries of South-east asia. In February this year, we invited a professor and furniture designer from Providence, Rhode Island School of Design (in the uS), to judge a furniture design competition and give a workshop on how to use uS hardwood to design something that’s both marketable and functionable in Ho Chi Minh City, Vietnam,” adds Mr Chan.

In Thailand, the association held a two-day workshop in June last year with Dr Koomen from the uK for 10 groups of young designers there. He adds: “aHeC members donated not only the lumber for the project, but also sponsored Dr Koomen for the workshop.”

after the Indonesian design seminar in april, the association is planning for a convention in Shenyang, China, for about 400 furniture designers and producers from June 10 – 12. The american Hardwood 14th South-east asia and Greater China convention, has as its theme, ‘The Sustainability and Diversity of uS Hardwood: Manufacturing and Design Solution’. He expects “about 20 percent of the participants from South-east asia.”

“We will have international speakers to go there and speak about design, application of raw materials for furniture design, etc,” says Mr Chan. Whereas in

the past, aHeC ventured into the main cities of China, “now we are going up north of China, near the boarder with Russia, in Liaoning Province. This is another of its strategies to promote uS hardwood in the emerging cities.”

Encouraging numbersOverall, in terms of lumber, South-east asia as a whole is down by 14 percent down. However, as global exports from the uS in 2008 were down by 20.5 percent, the South-east asian market performance, while depressed, was not as bad as many had anticipated. Surprisingly the Indonesian market was

as global exports from the Us in 2008 were down by 20.5 percent, the south-east asian market performance, while depressed, was not as bad as many had anticipated.


Executive Insights

pretty encouraging as it registered a positive growth of 7.5 percent.

Vietnam showed spectacular growth for the first 10 months of 2008. However, the recent economic downturn brought things to a grinding halt. as a whole, Vietnam was down by 7 percent. If the numbers are compared to the world’s 20 percent decrease, then again (compared to the world 20) – the results are no doubt, pretty heartening.

He adds: “In 2008, Vietnam uS hardwood lumber imports was worth some uS$60 million as there was quite a number of big furniture producers from China who sought the cheaper labour markets of Vietnam.”

Question Of ValueIndonesia has been a consistent user of uS hardwood particularly in the flooring and door manufacturing sectors in recent years. It leads the growth rate for the consumption of american hardwood lumber in South-east asia in 2008 with 7 percent increase in the value of shipments of sawn lumber (from uS$17,257,814 in 2007, to uS$18,524,260 in 2008).

Despite some of the problems of its own forest resources, Indonesia (still one of the top 10 furniture exporters) remains an important wood processing country in asia with its established industry infrastructure and skills base.

The export council has been working closely with such organisations as asmindo, the Indonesian furniture industry association and HDII, the Indonesian Society of Interior Designers.

In 2008, a total of uS$109.5 million value in hardwood lumber for South-east asia and some uS$60 million (reflecting some 56 percent of the total) of sawn lumber were shipped

to this region. Given that imports of uS hardwood logs have been down by 31 percent in value, the value of lumber has actually gone up.

Market ForcesThe export of american hardwood is dependent on the recovery of major markets. “While the market remains uncertain for South-east asia, the last few months of statistics showed that both Singapore and Malaysia have settled down,” noted Mr Chan.

The market this year is going to be difficult at best, but aHeC’s position is “not just to educate the producers and designers when the market is good”, aHeC will continue to prepare

seminars and various activities to enable companies in South-east asia to reposition themselves for the upturn in the market.

The aSean region and China with their economies ranked third in the world, will continue to progress. In this aspect, aHeC is looking at another niche area to promote its hardwood and help its members to gain further inroads – ie: the premium-end markets found in the hotel, tourism and upper range property markets.

“We are maintaining the promotion of uS hardwood in South-east asia as we want to develop the market here,” is a stance Mr Chan clearly makes. FDM ENQUIRY NO. 4801


�Materials Surfaces

KID

COME-BACK

Decorative Veneers:

W ood is being increasingly used as a decorative element and genuine wood veneers are

experiencing a comeback as a result. Overall, the demand for wood and wood products has risen steadily in recent years due to rising environmental awareness and escalating prices for fossil fuels.

Veneers are among the finest products that can be produced from wood and is regarded as a material suitable for decoration. These thin sheets of wood veneers give cupboards, shelves and tables their individual, decorative surfaces.

Globally, more than 200 different varieties of wood are regularly traded as veneers. Light, dark and reddish species from north america, europe and africa can be transformed into a variety of colours, patterns and designs.

Appealing & EcologicalIt is all about giving customers what they want. Similar to other products,

Wood veneers have seen a resurgent presence amidst the growing environmental awareness. By Malte Herrmann, head of marketing, Danzer Group

customer tastes vary with current trends. Danzer has seen strong demand for redwoods, wenge and zebrano. Many customers have requested for decorative wooden surfaces with strong contrasts from brown to black.

Veneers are used whenever customers require an individual and natural character. Companies use veneers in the manufacture of furniture and doors, as well as for the outfitting of yachts, private planes, concert halls, hotels, banks and other buildings.

Veneered wooden surfaces have great potential to take on an important function in design. at the same time, veneer is ecological. Forests are rarely destroyed to harvest wood used for decorative purposes, as very few trees are suitable for manufacturing wood products for decorative applications. On average, less than five percent of all harvested logs fulfill the requirements – making them suitable to be transformed into decorative veneers.

Renewable & ContemporaryOne of the major advantages of wood is that it is a sustainable resource. It is constantly growing and will continue to grow. However, the same cannot be said about oil, iron, coal and other raw materials.

It is estimated that just 10 percent of the world’s forest areas are needed to satisfy the demand for industrial wood products — including paper — without any recycling.

Moreover, the stock of wood is constant. The volume of wood and forests in the northern hemisphere have been growing for decades. From an environmental perspective, wood has an outstanding property: it actually absorbs carbon dioxide and retains carbon, which helps reduce the effects of global warming. Processing wood requires energy, but it consumes only a fraction of the amount of energy needed to process other materials.

Wood is also a contemporary material



that is suited to the demands of today’s consumers and designers. each piece of wood is unique, offering consumers the individualism that many seek in this age of mass production.

each log has its own individual character, history and point of origin. This is especially true for specialty species. The versatility of wood, including the ability to use and combine different species, qualities, structures and aesthetic properties, offers designers an almost limitless range of creative possibilities.

3D VeneersDanzer Group’s subsidiary, Reholz, has developed a patented process for moulding veneers three-dimensionally without cracking. With 3D veneers, it is possible to achieve stable moulds that are resistant to breakage or bending. Both the structure of the wood and texture of the veneer are unchanged in the process.

International demand for 3D veneers is increasing. Three-dimensional veneers are used in the furniture and automotive

industries. The furniture industry uses 3D veneers for chairs and rounded furniture fronts, and the automotive industry employs the material in interior trim applications.

another field of application for 3D

veneers are coatings for three-dimensional surface. Reholz produces special veneers for the medical technology and electronics industries that can be applied to rounded metal or plastic surfaces. FDM

ENQUIRY NO. 4501

Danzer Group: SubSiDiary iFo obtainS FSC CertiFiCateDanzer Group’s subsidiary Industrie Forestière d’Ouesso (IFO) in the Republic of Congo has

achieved Forest Stewardship Council (FSC) certification for its forestry concession. Danzer

Group can now supply logs, lumber and veneers from major African species with an FSC

forest management certificate.

The FSC certificate guarantees that IFO’s forest concession — covering an area

of nearly 1.16 million ha (2.9 million acres) — is managed according to the FSC forest

management standard that includes social, economic and ecological requirements. To

date, the IFO forest concession is the largest in Africa which has been awarded full

FSC certification.

Lumber and logs from IFO are sold by Danzer Group subsidiaries Interholco and Danzer

UK, while veneers are available through Danzer Europe Veneer (DEV). IFO’s FSC certification

has been realised in close cooperation with WWF (World Wide Fund for Nature), in particular

by its GFTN programme (Global Forest and Trade Network).

ENQUIRY NO. 4502

These thin sheets of wood veneers give cupboards, shelves

and tables their individual, decorative surfaces.



Beautifully Varnished

How do you make a scratch-resistant varnish using sugars and vegetable oils? Researchers can

show how it’s done: They have developed a furniture varnish containing roughly 50 percent renewable raw materials that offers the same hard-wearing quality as conventional varnishes.

When the petroleum runs out, renewable sources of raw materials will have to be found to replace petrochemical feedstocks. In the case of furniture varnishes, Fraunhofer researchers at the Institute for Wood Research, Wilhelm-Klauditz-Institut WKI in Braunschweig, Germany, have already developed an alternative product in which the majority of petrochemical components have been substituted.

Attractive AlternativeTheir water-soluble furniture varnish is based on vegetable oils and sugars and has identical properties to the conventional varnishes on sale today. It is hard-wearing, scratch-proof and resistant to chemical attack.

“This varnish offers the coatings industry an attractive alternative to petrochemical products that is economical to produce

Fraunhoefer researchers have come up with a varnish that’s hard wearing, scratch-

resistant and best of all, environmentally-friendly.

and performs well in all tests,” reports Dr Claudia Philipp of the Fraunhofer WKI.

The new varnish is based on the chemical compound 1,3-propandiol, which is derived from glycerin. Glycerin in turn is the basic substance found in all vegetable oils, and is readily available as a byproduct of manufacturing processes for fatty acids and biodiesel, for example.

In the laboratory synthesis, the researchers transform 1,3-propandiol into polyurethane, which serves as a binder in hard, transparent, scratch-resistant varnishes. “The aim is to use the relatively cheap 1,3-propandiol as a substitute for one of the more expensive petrochemical synthesis components, without altering the coating properties of the varnish,” explains Dr Guido Hora, its department head.

A Question Of Resilience1,3-propandiol has not been considered a valuable raw material in the past, and rarely enters into the composition of varnishes. “Our first step was to conduct a detailed analysis of the relationship between the starting material and the

properties of the final product,” Dr Claudia Philipp says. “as the chemical structure of 1,3-propandiol led us to surmise, the new varnish is not only hard but also resilient.”

In other words, it doesn’t chip when a cup or other object is dropped onto a varnished table. a good varnish needs to be hard, but also capable of amortising shocks to a certain extent, so as to prevent damage to the item of furniture beneath the coating.

another advantage of the new varnish is that it contains no n-methyl-2-pyrrolidon (nMP), a solvent once widely used in polyurethane coatings. This substance is meanwhile known to have a toxic effect on the growing embryo and is classed throughout the eu as a hazardous chemical requiring a warning symbol on all products containing a concentration higher than five percent. FDM ENQUIRY NO. 4503

– Using Renewable

ENQUIRY NO. 016


Hardwoods & Softwoods

Drying Of

TiMBERTREATED

A preventative preservative timber treatment; fungicide and/or insecticide, is often carried out

at the end of the sawmilling process, or sufficiently early in the production process, for the timber to be ‘treated’ when it reaches the kiln.

There are different treatment methods and products. examples of treated timber that most commonly need drying include:

* Softwoods Treated Against SapstainFresh sawn softwoods are sometimes treated against sapstain, usually by

What are the common situations when treated timber will need drying? Contributed by Maryline Foucher, Cathild Industrie

Geo

rge

Rob

erts

(nW

) Ltd

, Liv

erp

ool,

uK

immersion; the timber will only need to be left to drip-dry for a few hours before it can be handled and transported before it is loaded into a kiln.

* Hardwoods Treated Against Insect AttackThe drying of hardwoods that have been treated with an insecticide does not require

The mosT common preservaTive TreaTmenTs

methods products

- Brushing, spraying, or immersion

- Pressure treatment

- Water based preservatives, organic solvent based emulsion or

dilution preservatives

- Water based solutions of metallic salts

any particular precautions. However, remember that insecticide treatment may be essential if the temperature in the timber core is not likely to reach a suitably high value quickly enough at the beginning of the drying cycle (at least 50 deg C).

* Pressure Treated PineWhether in the form of posts or boards for cladding for example, softwoods that have been treated with metallic salt preservatives need to be dried before treatment. Such a treatment reintroduces water inside the timber and the timber will thus need to be dried again, although this second drying cycle will be quicker than the first.

Timber Drying TodayThe installation of a timber-drying unit always occurs in a context where many general, or more company-specific, issues need to be addressed. Question like what are the most efficient solutions today can be expected.

Cathild Inc specialises in the design and sale of conventional

dry kilns, whether stainless steel or aluminium. Headquartered in

Quebec, Canada, the company has introduced a ‘High Capacity,

Low Temperature’ kiln designed specifically for the drying of

softwood lumber.

Optimised fan speed, flow rate and pressure create a system

of air circulation that provides homogeneous drying. The constant

(low temperature) drying conditions offer a compromise between

drying quality, energy management and speed. In addition, its CH

12W control system provides individual control in each kiln zone.

Large volumes can be available (125 m3 from half a zone or

250 m3 from a whole zone).

caThild: high capaciTy, low TemperaTure Kiln

ENQUIRY NO. 4603



The Different Practices Advantages Disadvantages

Air drying only - No investment in equipment - Requires a very high amount of space and is very time consuming- Inadequate for most end uses- Many defects

Kiln drying only - Fast high quality drying- The moisture contents achieved meet all needs

- Requires a lot of space- Stocks upstream and downstream- Any wide distribution of initial moisture content values will be difficult to manage

Air drying followed by kiln drying

- Increased flexibility of stock management- The moisture contents achieved meet all needs

- Requires a very high amount of space- Stocks upstream and downstream- The defects encountered with air drying do often still occur

Drying in a pre-dryer and then in a kiln

- Very high flexibility of stock management- The moisture contents achieved meet all needs and they will be contained within a narrow range- Optimum quality

- Requires a lot of space- The level of capital investment required is high

Located in Bassano del Grappa, Vicenza, Italy, BIGonDRY srl, offers whole plants committed to

drying as well as sterilising HT treatment plants (for packaging and vaporising plant of wood).

The specialist in drying kiln and heat treatment plants, has also developed an accessory to

ensure optimal humidity control using the high pressure system (70 Bar) and, a sensor for the

recording and the controlling of the air flow throw

the wood stacks. According to the company, this

offers cost reductions during the drying cycle of to

40 percent (when compared to traditional systems).

With its telematics attendance system in place,

the company is able to attend to customers’ calls

in an efficient manner, an added-value service that

it prides itself on.

Influence On TimberIn order to adequately control the treatment stages and to take into account the supplier’s recommendations (regarding the preservative product during timber drying), measurements of the timber moisture content should be taken accurately. In addition, both the timber moisture content and the atmosphere inside the chamber should be managed properly during the drying stages.

• Starting the drying processIf the timber has air dried quite a lot, during drip-drying for example, the timber should go through an initial conditioning phase inside the kiln for a period of time – long enough to facilitate the start of the drying process.

• Conducting the drying cycleeven though timbers dry faster when they have been pressure treated, particular care and a specific drying schedule are necessary to avoid timber distortion and splitting. This will occur if the drying process is carried out too aggressively.

Technical Implications• Fixing of treatment productsIf the timber is kept under cover, and if the time elapsed between treatment and kiln drying is short, the risk of leaching will be minimised. The high temperature programmed during the drying cycle will also help to permanently fix the preservatives.

• Drying timeThe second drying cycle that takes place after the preservative pressure treatment is shorter than the first (50 percent to 80 percent depending on the cases).

• Measurement of moisture contentThe introduction of metallic salts into the timber can alter the moisture content readings (which can be measured by the electrical resistance method using probes). It may be necessary to consider special calibration.

• Influence on equipmentThis question should be examined with both the suppliers of the preservative product and the kiln manufacturers: Is the

preservative corrosive? Will some of the kiln parts be at risk of oxidation? FDM

BIGonDRY: DRYInG & STeRIlISInG KIlnS

ENQUIRY NO. 4602

The high temperature programmed during the

drying cycle will also help to permanently fix the

preservatives.

national Biofuels Ltd, Ireland German Timber Promotion Fund

ENQUIRY NO. 4604

Advantages and disadvantages of the various current drying practices



C ustomers are becoming highly critical in their selection as more and more choices are

available in the furniture market. Durability and stability are some of the features expected when a buyer sources for furniture, besides being functional with ergonomic elements and aesthetic values.

In addition, wood-based furniture has to adhere to requirements and standards imposed by importing markets, including environmentally friendly features and prudent use of preservative chemicals.

Currently, more than 95 percent of the drying mills in Malaysia are based on the conventional steam-heated system.

Then & NowDrying kilns are enclosed chambers in which the condition of the drying medium or air is controlled. Temperature, humidity and circulation are monitored to accelerate or retard the drying process.

The main purpose for drying timber is to ensure that the timber is dimensionally stable prior to usage as structure or in downstream manufacturing. The process is essential for economical utilisation of timber for construction, building, manufacturing and craft purposes.

FRIM responded to enquiries from interested exporters, manufacturers and kiln operators by investigating the various technical aspects of system design and control instrumentation.

as opposed to conventional kilns where subjected temperatures are below 100 deg C, the FRIM HTD system dries timber with temperatures well above 100 deg C.

The heating medium (heated air at temperatures in excess of 100 deg C) is provided by finned heat exchanger which is powered by steam supplied from a boiler system.

Conventional steam-heated systems take a back seat as high temperature drying process emerges for high throughput of kiln-dried lumber. By Choo Kheng Ten and Sik Huei Shing, Forest

Research Institute Malaysia

The HIGH

DRyInG WayTemperaTure



The drying system involves an optimised heat treatment process, using both wet and dry heat. It is operated by semi-automatic equipment that controls the humidity and high temperature via a series of heat sensors and air dampers. FRIM scientists have completed the development of a specific HTD protocol for rubberwood which optimised the rate and quality of dried timber stocks.

Cost Efficient Energy Savingsusing the HTD system, drying time is now reduced between two to three days, from previously eight to 11 days in the conventional system. When drying cycle is shorter, fewer drying chambers will be required.

The quality of HTD timber is generally good for downstream processing, characterised by a more compact wood with enhanced grain feature. Specific mechanical strength of the timber has improved, along with its enhanced dimensional stability.

This project was awarded the anugerah Inovasi Perkhidmatan awam (aIPa) 2005 (Category: R&D collaboration with private sector), Gold Medal award in Malaysia Technology expo 2006 (Category: environment, energy and Protection), Gold Medal award in Invention, Innovation and Technology exhibition 2006 (Category: Manufacturing Process) and FRIM Best Research award 2006. FDM

ENQUIRY NO. 4601

When drying cycle is shorter, fewer

drying chambers will be required.



Hardwoods

Yellow Meranti (Shorea Dipterocarpaceae)Other Common Names: Bam, Damar Hitam, Meranti, Seraya, Seraya Kuning

Major species include S dolichocarpa, S faguetiana, S gibbosa, S hopeifolia, S longisperma, S maxima and S multiflora. The young bole is smooth with light and dark coloured patches but tends to crack or become scaly-fissured when old.

Distributionyellow meranti trees range from small to very large. Found in most areas of well-drained forests throughout Malaysia, yellow meranti trees are better represented in hilly areas from 150m to 600m.

General Wood Characteristicsyellow meranti is a light hardwood with a density ranging from 575 kg/m3 to 735 kg/m3 air dry. The sapwood is lighter in colour than, and is clearly defined from the heartwood, which is lighter yellow-brown with a green tinge, darkening to deeper shades of yellow-brown or brown. Texture is moderately coarse but even, with usually interlocked and sometimes wavy grain.

Working PropertiesIt is easy to re-saw and cross-cut in both green and air dry conditions. Planing is also easy and the planed surface is smooth to moderately smooth. Gluing quality is good, making it suitable for plywood manufacture. The timber dries well, without any defects.

Uses yellow meranti is suitable for light construction, general utility purposes, planking, furniture, flooring, pallets, plywood manufacture as well as panelling and partitioning. With its good peeling and gluing properties, it is prized as a plywood species. It is also suitable for the production of laminated scantlings, which are used in the manufacture of door frames, windows and sills. FDM

Information provided by Malaysian Timber Council

ENQUIRY NO. 4610

Apple (Malus sylvestris)Family: Rosaceae

Distributionapple is a cultivated fruit tree, persistent, escaped and naturalised locally across southern Canada, in eastern continental uS, and from Washington south to California. It is native to europe and west asia. apple grows wild in the southern part of Great Britain and Scandinavia and is found throughout europe and south western asia. It is planted in most temperate climates.

MTC

, Woo

d W

izar

d

Compression

Specificgravity

MOEX106 lbf/in2

MORlbf/in2

Parallellbf/in2

Perpendicularlbf/in2

WMLa

in-lbf/in3Hardnesslbf

Shearlbf/in2

Green 0.61 1.05 7,400 3,000 850 15.7 1,090 1,640Dry 0.67 1.27 12,800 6,030 1,300 23.0 1,730 1,740

apple (Malus spp) consists of 30+ species that occur on both sides of the atlantic in northern temperate zones. Its wood can be confused with pear (Pyrus spp) and other ‘fruitwoods’ in the rose family (Rosaceae). Malus is the classical Latin name for apple. apple hybridises with north american crab apples.

General Wood CharacteristicsThe tree rarely reaches 30 ft (9 m), with a small crooked bole to 1 ft (0.3 m) in diameter.

apple wood has a reddish gray heartwood and light reddish sapwood (12 to 30 rings of sapwood). When steamed, the wood becomes reddish brown to dark red-brown. The wood of wild apple trees are said to be better than that of cultivated varieties.

Kitc

hen

Cab

inet

Mar

t, C

alifo

rnia

, uS

a



Softwoods

Radiata Pine (Pinus Radiata)Also known as Remarkable Pine in Australia, the tree has had a dramatic impact on the world timber scene.

The radiata pine is suited to a considerable range of growing conditions, is easily raised and planted, and provides larger yields of usable timber in a shorter time than many native species around the world.

While the radiata pine is a softwood, it does present some confusion as the wood is harder (ie: denser) than some hardwoods (eg: balsa and poplars).

Distributionalthough radiata pine is native to a very small area in central coastal California, in the uS, most commercial radiata pine lumber can be found in the plantations in Chile, new Zealand, australia and South africa.

Remarkably, the species is one of the most widely grown exotic timber species in the world, covering 3.7 million ha, with large areas of plantation in new Zealand (1.2 million ha), Chile (1.3 million ha), australia (740,000 ha) and Spain (260,000 ha).

This fast growing tree can reach 100 ft in height and up to 24 in in diameter with 15 – 25 years.

General Wood CharacteristicsThe plantation-grown tree offers wood with a fairly fine, straight grain texture and relatively few knots. There is only a small

variation in properties from country to country. It is approximately 20 percent heavier in density than Ponderosa pine. The softness of the wood makes it a forgiving material to work with.

The sapwood is slightly pale white, while the heartwood is light brown with a slight reddish cast. Its growth rings are noticeable. It offers medium strength and stiffness with a bending strength (MOR) averaging 12,000 psi.

Working PropertiesRadiata is one of the easiest drying species and offers a shrinkage of 5 percent after drying. However, excessively dry wood may develop torn grain during machining. When over-dried, some splitting may occur during nailing; pre-drilling the wood may be necessary. Over-dried wood may also warp or present shrinkage defects as it dries in use.

While the radiata pine machines very well, some grain tear out around knots may occur. The pine is very easy to glue. nails, screws and staples hold well compared to eastern white pine and ponderosa pine.

Uses The timber is particularly useful as it can be readily sawn and peeled. It offers good nail-holding power, works well, can be easily stained. The wood absorbs insecticides and fungicides easily and responds well when pressure treated, making it suitable for long-life applications in exterior environs.

The lumber is widely used for building and structural applications, including glue-laminated beams and engineered trusses. In addition, the wood has found favour amongst furniture and cabinetmakers as it can be painted and varnished easily. It is also used for millwork as well as for panelling purposes. FDM ENQUIRY NO. 4612

Working PropertiesThe wood, which is very difficult to split, is hard and difficult to work, but is easily stained and polished. The timber converts cleanly but is moderately hard to saw. a clean finish is produced normally, but a reduction of the cutting angle to 20 deg is an advantage to planing. When exposed, apple wood is non-resistant to heartwood decay.

Usesapple is used in furniture, turnings, mallet heads, skittle balls, umbrella handles, machines and toys, cog wheels, fruit presses, shuttles, wood screws, plane blocks, bookbinder screws, boat knees, canes and walking sticks, drawing instruments, pianos and tool handles. FDM ENQUIRY NO. 4611

Information provided by uSDa Forest Service



W ithin the South-east asian region, Malaysia and Indonesia leads the way in terms of forest

resources, as these nations are blessed with the rich, lush tropical rain forest. Statistics from the International Tropical Timber Organization (ITTO) suggest that the forest coverage in these countries cover approximately 58 percent and 59 percent of its total land area, respectively.

Further, these nations have adopted Sustainable Forest Management (SFM)

SuStainableSouth-east asia:

Forest Management& Certification Practices

Lay Hw

a Chew

, KL, M

alaysia

The disparity in national practices calls for negotiations to ensure that a common standard is agreed upon. By Dr Jegatheswaran Ratnasingam

practices in order to sustainably develop its forest resources. The SFM concept is however not new: it simply requires sustainable management of the forest resource from a multi-faceted approach.

In this context, the SFM aims to ensure the derivation of benefits, both tangible and intangible, from the forest in perpetuity. Most importantly, the extraction of logs from the forest will be controlled, and carried out selectively, to ensure the sustainability of forest resources. The

adoption of the concept has helped to restrict harvesting operations, and with that, the supply of logs from the forest has been somewhat curtailed.

Curtailment Policiesalready, the large wood-processing sectors in these countries are facing short-supplies, and they have invariable lead to the premature closures of many processing mills. It has been estimated by the International Furniture Research Group (IFRG) that the adoption of SFM in Malaysia and Indonesia has lead to a closure of almost 30 percent of its primary processing mills, due primarily to the non-availability of raw materials.

Inevitably, the adoption of SFM has also arguably intensified illegal wood supplies. although evidence that links illegal logging activities to the excess wood-processing capacity available remains inconclusive, many published reports provide at best, circumstantial evidence to suggest that the demand from the wood processing mills tend to somewhat induce greater indulgence in illegal wood extraction activities.

One of the main weaknesses of the SFM practices lies in its inability to ensure sustainable management practices, due to poor enforcement of the practices as well as the insignificant penalties imposed on offenders.

Since 2000, the concern for illegal logging has heightened throughout the world, especially in the european union. as the eu is the leading advocate for environmental-friendly forestry practices in the world, it also offers the largest market for environmental-friendly forest products.

To offset growing concerns among consumers of tropical forest resources, forest certification schemes have come into existence primarily to ensure sustainable and permitted logging operations in the forests.

Forest CertificationConcerns about increasing loss of tropical forests due to indiscriminate logging



practices, has led to the development of certification as an instrument for promoting sustainable forest management since the mid 1990s.

Certification provides a mechanism for independent validation of sustainability in markets where forest products are subject to consumer resistance on environmental grounds. and while the initial focus of certification was mainly on tropical forests, these processes have since expanded to encompass all forest types.

The two most important international forest certification schemes in the world are: the Forest Stewardship Council (FSC) certification and the Program for the endorsement of Forest Certification schemes (PeFC). In the case of Malaysia and Indonesia, the Malaysian Criteria & Indicators (MC&I) and the Lembaga ekolabel Indonesia (LeI), have been developed to cope with the need for certification schemes that is more acceptable to national forestry practices and policy.

On the global scale, some 280 million ha of forest was certified at the end of 2008. The FSC (25.14 percent) and PeFC (68.69 percent) schemes in combination, account for 93.8 percent of all certified forest areas.

Forest certification is envisaged as a market-driven mechanism that promotes sustainable forest management in three main ways. By:

(1) establishing standards for forest practices and management that guarantee a certain level of management performance,

(2) enhancing marketing opportunities for products from sustainably managed forests, and (3) promoting public education about improved forest management, for both producers and consumers.

(4) ensuring maximum value for the forest resources, at the same time promoting equitable benefits to all the stakeholders.

The Argument ForDespite heightened interest in forest certification over the years, the total area of certified forests presently stands at 280 million ha which is 7 percent of the global forest area of 3,952 million ha, (or about 20 percent of the total production forest area of 1,347 million ha).

While the proponents of certification argue that certification schemes are enhancing forest management throughout the world, it is clear that the main impact have been on large-scale industrial and state-owned temperate and boreal forests (as the impact on forests in developing countries have been far less significant).

To a large extent, it can be argued that certification has had its greatest

success in ‘preaching to the converted’ – in saving forests in developed countries that were probably already saved – while the vast majority of tropical forests that were the original target for certification have remained outside the process.

The disparity between developed and developing countries appears to stem from two major constraints:

(1) insufficient demand for certified forest products in global markets,

(2) wide gaps between existing management standards and certification requirements, especially in the tropical countries.

The demand for certified wood products is small in the global marketplace, and in usually confined environmental conscious countries, such as Germany and the Scandinavian nations. In addition, the price premium for certified wood products in the retail market is also small, usually in the extent of 3 percent. as such, many wood products manufacturers find the amount too small an incentive for them to pursue and adopt certification schemes.

In recent years, the eu has advocated a requirement for certified wood products in most public procurements; however, its implementation is still not european-wide yet. nevertheless, with such schemes,

Bar

bar

a W

eigh

tman

, Cal

iforn

ia S

tate

uni

vers

ity, u

Sa

un

OD

C

The demand for certified wood products is expected to rise, as a higher price-premium may be obtained.

To offset concerns among consumers of tropical forest resources, forest certification schemes have come into existence to ensure sustainable and permitted logging operations in the forests.



the demand for certified wood products is expected to rise, as a higher price-premium may be obtained. This hopefully, is the further impetus for manufacturers to adopt certification schemes.

In a recent survey conducted by the International Furniture Research Group (IFRG) in 2008 covering more than 500 wood products manufacturers in Malaysia and Indonesia, almost 72 percent of the respondents did not see themselves adopting the certification schemes over the next five years, primarily due to the small financial gains to be made.

although, 85 percent of the respondents agree that the indirect benefits of adopting certification are encouraging as it could be used as a marketing tool to expand market share. In reality, it is difficult to translate certification schemes into higher profits. Further, almost 27 percent of the respondents indicated that by virtue of them using plantation-based wood resources, they were not required to adopt certification, which was perceived to be applicable to natural forests only.

another misconception among the respondents was the fact that almost 15 percent of the respondents perceived that by adopting the ISO 14000 environmental Management System, they were precluded from the need for certification.

The results of this survey clearly expound the fact that there is much misconception about certification, and there is an overwhelming need to disseminate more information about the benefits of adopting certification schemes.

nevertheless, the existence of national certification bodies poses challenges to standardise and harmonise, the whole business of certification. The disparity in national practices when compared to internationally recognised certification schemes, calls for negotiations among all parties concerned to ensure that a common standard that has been agreed upon, is adhered to.

In this context, the introduction of the Voluntary Partnership agreement (VPa) by

the european union, with several tropical countries including Malaysia, offers a new approach to this problem. When fully implemented, the forest resources can be managed sustainably to ensure equitable benefits to all the stakeholders.

Challenges To Certification To many in the tropical region, the need for certification is often misconstrued as a non-tariff trade barrier, which is a model of protectionism.

However, in reality, the benefits of certification are often not fully appreciated in many parts of the world. nevertheless, the extent, type and location of certified forests are indications where the direct impacts of certification have occurred. From the published statistics available from inter-governmental organisations, it is apparent that only 5 percent of the total global forest area has been certified. Most of which are temperate and boreal, with relatively slow progress in tropical forests.

although the cost of certification is regarded as high at this point of time, the benefits, most indirect, may provide long-term business leverage to the

practitioners in South-east asia. This is made more noticeable, especially when the developed world (the largest consumers of tropical wood products) are increasingly concerned with environmental issues and non-formal forestry practices.

It can be argued that South-east asian countries need to aggressively embark on certification schemes. This will enable them to increase the transparency of their forestry and forest products manufacturing activities and, enable their produces to gain greater access to marketplaces where environmental concerns continue to heighten.

In the final analysis, it is apparent that forest certification is here to stay. It has become one of the rules in the globalisation of forest and forest products sector. non-compliance can only lead to market isolation and alienation, which will bring about adverse economic effects to the respective nations. This consequence is truly untenable to many developing countries as its forestry and forest products sector continue to be an important socioeconomic sector that provides for national growth. FDM

ENQUIRY NO. 4605

Bird

life International

South-east Asian countries need to

aggressively embark on certification schemes.


MARKET REPORT

BluEpRinT FoR GROWTH

T he Malaysian timber industry is to be transformed into a manufacturer of high-value

products and services under the country's national Timber Industry Policy (naTIP).

a blueprint for the long-term growth of the timber industry (2009 – 2020) was mapped out in a policy document called the national Timber Industry Policy (naTIP). Launched in late February, the policy will place emphasis placed on the export of processed timber products. “With the policy, the industry’s annual export is expected to more than double to RM53 billion (uS$14.6 billion) by 2020,” said the then Deputy Prime Minister Datuk Seri najib Tun Razak at its launch.

The Minister also outlined the need for federal and state administrations to keep re-aligning their strategies vis-à-vis the guidelines documented in naTIP in order to grow the industry systematically and sustainably.

Malaysia is the largest exporter of tropical logs and sawn timber, the second largest supplier of plywood and the 10th largest exporter of furniture. FDM

Unit

PENINSULAR MALAYSIA SABAH SARAWAK

Quantity FOB Value (RM) Quantity FOB Value (RM) Quantity FOB Value (RM)

LOGS m3 15,932 24,254,180 501,064 276,362,072 2,976,939 1,390,983,812

SAWN TIMBER* m3 587,347 1,003,979,058 340,523 555,595,082 637,783 622,846,030

SLEEPERS m3 9,372 9,858,140 0 0 2,303 2,753,556

VENEER m3 4,129 12,485,077 72,640 96,269,191 261,779 245,485,638

MOULDINGS*** m3 151,207 394,008,964 49,051 126,217,298 14,214 26,642,128

CHIPBOARD / PARTICLEBOARD m3 435,542 287,472,815 29,559 12,267,269 100,381 49,277,958

FIBREBOARD m3 829,915 822,055,259 39 32,907 141,205 155,985,745

PLYWOOD** m3 262,423 385,711,356 909,123 1,235,117,089 2,815,392 3,730,412,329

WOODEN FRAME kg 9,058,527 107,021,571 0 0 0 0

BUILDERS JOINERY & CARPENTRY kg 111,006,586 664,085,375 10,256,648 59,579,675 49,753,242.0 112,500,630

WOODEN FURNITURE Unit n.a. 5,617,396,907 n.a. 37,730,226 n.a. 17,920,567

RATTAN FURNITURE Unit n.a. 36,789,474 n.a. 6,604,843 n.a. 0

OTHERS TIMBER PRODUCTS *** n.a. 312,399,784 n.a. 35,577,208 n.a. 58,380,190

GRAND TOTAL**** n.a. 9,677,517,960 n.a. 2,441,352,860 n.a. 6,413,188,583

Unit

MALAYSIA

Quantity FOB Value (RM) % Share of Total FOB Value

% change in Quantity 08/07

% change in FOB Value 08/07

LOGS m3 3,493,935 1,691,600,064 9.1 -10.9 -5.3

SAWN TIMBER* m3 1,565,653 2,182,420,170 11.8 -25.5 -18.7

SLEEPERS m3 11,675 12,611,696 0.1 -16.1 -26.1

VENEER m3 338,548 354,239,906 1.9 20.4 4.7

MOULDINGS*** m3 214,472 546,868,390 3.0 -26.1 -30.2

CHIPBOARD / PARTICLEBOARD m3 565,482 349,018,042 1.9 -4.7 20.8

FIBREBOARD m3 971,159 978,073,911 5.3 2.6 -1.2

PLYWOOD** m3 3,986,938 5,351,240,774 28.9 8.3 -0.6

WOODEN FRAME kg 9,058,527 107,021,571 0.6 -13.4 -5.0

BUILDERS JOINERY & CARPENTRY kg 171,016,476 836,165,680 4.5 6.6 -1.0

WOODEN FURNITURE Unit n.a. 5,673,047,700 30.6 n.a. 3.4

RATTAN FURNITURE Unit n.a. 43,394,317 0.2 n.a. 3.4

OTHERS TIMBER PRODUCTS *** n.a. 406,357,182 2.2 n.a. -2.4

GRAND TOTAL**** n.a. 18,532,059,403 100.0 n.a. -3.3

Malaysia's national Timber Industry Policy:

Malaysia: Export Of Major Timber Products (Jan – Oct 2008)

* Sawn timber includes dressed timber | ** Plywood includes blockboard

***Moulding includes wooden dowels | **** Grand Total does not include shipment between Peninsular Malaysia,Sabah & Sarawak

Source: M

TC, D

OS

ENQUIRY NO. 4402


MARKET REPORT

The US economy & ITSTimber indusTry

T he Organisation for economic Co-operation and Development (OeCD) has forecast that the

global economy will shrink by 2.75 percent this year. In its twice-yearly report, the Paris-based think-tank said the united States economy is expected to shrink by 4 percent and the euro-zone economy by 4.1 percent.

uS industrial production decreased 1.4 percent in February for the fourth consecutive monthly decline to 11.2 percent below the level of a year earlier. More important, as everyone knows, consumer confidence is at low ebb for modern times – fuelled by the country’s unemployment rate. Its new housing supply peaked in May 2006 at 1.98

There is a huge way to go before the US consumer engine of growth really gets up any steam. By Michael Buckley, consultant, World Hardwoods

million units, but by January 2009 they were down 44.5 percent.

Shoots Of RevivalThe wood industry in america is however, not just dependent on consumer purchasing but more on the activity of the construction sector and here there may just be a little light appearing to shine.

Banks are starting to lend, albeit under government pressure, and in February, home sales increased 5.1 percent over January, with improvements recorded in all regions. Housing starts climbed 22 percent in February although they were still 47.3 percent down on the previous year and new home completions and building permits issued were also up.

So, is this the beginning of the green shoots of revival? Whatever it is, there is a huge way to go before the uS consumer engine of growth really gets up any steam and meanwhile, the downturn is having a huge impact on the wood processing industries from joinery products such as flooring and doors, to furniture, decking and anything to do with construction.

With the uS so dependent on imported products, this fall in demand has already adversely affected factories from China to Vietnam and all over South-east asia. There is probably much more knock-on effect left to come here although the development of domestic demand within asia may provide some cushion.

In the uS however, it seems that

When sustainably managed, timber will easily take its place with other competitors, many of which are not renewable and leave a heavier footprint on the planet than wood.

Bea

r C

reek

Lum

ber

, Was

hing

ton,

uS

a


MARKET REPORT

things cannot get much worse and, with the Obama administration working hard and determined to turn things round, mid-2009 may possibly see the bottom of this market and some upturn in 2010 – perhaps!

Meanwhile, In Asia…For asian manufacturers looking to import raw timber material from around the world the conventional wisdom might suggest that prices will continue to fall on reduced demand and supplies will be easier than in the boom times of 2006/7.

Most timber buyers however, know that the opposite is probably true. Production capacity is falling and the resources necessary to feed production are not being contracted. Mills are going on short time, reducing shifts and in many cases just closing up shop.

This is particularly true of the uS which has the single most productive source of hardwood forests, sustainably managed for long-term production. But right now, it is the unsustainable flow of cash that is the big issue.

according to George Barrett of the uS publication, Hardwood Market Review: “Hardwood lumber exports from the uS fell 18.8 percent in 2008 to 2.2 million m3 (945 million board feet), the first time in 16 years that annual totals have fallen below 1 billion board feet. The major Chinese market fell 16 percent in 2008, to 459.1 million m3, less than in most other developed countries. every month in 2008 lower shipping totals were posted than the same month in 2007, just as every month in 2007 was lower than the corresponding month in 2006.”

On The Export FrontOne longer term effect of these market disruptions and changes in orientation has been a reduction in the consumption of ‘grade’ lumber in the uSa itself and thus an increased importance of export markets to uS producers.

Traditionally, the export market accounted for about 10 percent of grade lumber by value, although it has to be borne in mind that, of the remaining 90 percent, almost half of total mill-run production is non-grade material used in pallets and packaging.

Today, it is estimated that about 30 percent of all grade lumber is exported. This has come about by the huge transfer of uS furniture production to overseas and an increasing volume of flooring, doors and construction items imported.

It is rare that innovations come along in the primary wood sector although there are many constantly shaping the secondary manufacturing sector, especially in the fields of engineered products, adhesives, treatments and finishes.

It is estimated that about 30 percent of all grade lumber is exported.

elements due to its strength and stability with a good weight to mass ratio.

The future of the wood industry is anyone’s guess. But as the best construction and furniture material the world has from an environmental standpoint, when sustainably managed, timber will easily take its place with other competitors, many of which are not renewable and leave a heavier footprint on the planet than wood.

The key now is consumer demand which is about as predictable as the winner of the famous annual Grand national horse race in uK. and for those non-racing enthusiasts, it was won this year by a 100-1 outsider! FDM ENQUIRY NO. 4401

January – December

Hardwood Products 2005 2006 2007 2008 %CHNG

World Total Lumber 1,485,545,229 1,618,498,908 1,421,964,171 1,130,878,575 -20.47

Logs 589,304,868 618,409,844 809,439,021 734,417,267 -9.27

Veneers 442,840,405 428,244,884 447,580,454 375,249,076 -16.16

Flooring 92,468,342 99,364,107 92,501,058 82,720,275 -10.57

Plywood 72,667,227 77,646,429 87,895,750 102,092,344 16.15

Chips 47,517,935 53,277,855 57,958,383 69,371,119 19.69

Molding 20,194,514 24,031,611 29,598,402 28,024,404 -5.32

Siding 3,097,629 6,559,902 1,656,614 2,627,674 58.52

Pockets Of Nuggetsnew species, in commercial volumes, do not get discovered which leaves plantation technology as the main source of ‘new’ material. One exceptional development of note in the primary sector is the current focus on tulipwood – one of the most available and sustainable of all uS hardwood species, yet little known as a structural timber outside the uSa.

The american Hardwood export Council in europe has been working on structural testing and new treatments of tulipwood and providing good technical information as well as some interesting examples of its use. The next few years are likely to see its use in windows, and small structural

Table: uS Hardwood exports Source: uSDa, FaS, 2009


MARKET REPORT

China's Timber Production Plan For 2009Timber output expected to hit 100 million cubic metres in 2009

Tropical Forest Trust

C hina’s annual timber production plan for 2009, published by the country’s State Forestry

administration, projected that 158.57 million m³ of timber will be logged and its timber output will amount to 100.39 million m³.

The three provinces with the highest logging volume and timber output are: Guangxi Province (19.91 million m³ of logging volume, 13.13 million m³ of outputs); Fujian (17.43 million m³ of logging volume, 12.06 million m³ of outputs) and Hunan (15.16 million m³ of logging volume, 9.703 million m³ of outputs). The logging volume and timber outputs of these three provinces make up 33 percent and 35 percent of the national total, respectively.

China plans to raise its forest coverage rate to 20 percent by 2010 and 26 percent by 2050, and a minimum of 310 million ha of forest land will be retained and maintained.

Its plantation areas have also been increasing steadily. according to the State Forestry administration, plantation areas in China reached 53.3 million ha, accounting for nearly 40 percent of the world’s total. Its forest area has been increasing at a rate of 4 million ha annually in compared to a global decrease of over 6 million ha per annum.

Supply ShortageHowever, China is facing the brunt of a pending log supply shortage as a

result of Russia’s current 25 percent log export tax and the scheduled 80 percent tax in late 2009. With Chinese demand for wood raw material inputs (logs and lumber) still expected to remain relatively strong in 2009, lumber prices or exporters’ returns in China are expected to be attractive.

Major changes to supply and price dynamic have already occurred in log and lumber markets in Japan, Finland and the Baltics as a result of the 25 percent tax. according to the Wood Markets Group, northern China has been the most negatively impacted by the tax and the country needs to source new log and lumber suppliers and, also step up its own domestic timber harvests.

Wood demand in China itself is expected to increase despite decreases in finished wood product exports as its won domestic wood product market continues to expand. VP and co-author of the Wood Markets report, Gerry Van Leeuwen says: “The ripple effect from Russia’s log export tax will continue to disrupt major log and lumber markets – especially China – and higher prices (or returns to exporters) are a given!”

“This means that there are some potentially attractive opportunities for those log and lumber exporters that can create a competitive fit with China, especially during the global market downturn,” says its company president, Russell Taylor. “The current market turbulence leaves China as the only destination that will likely require increased log and lumber imports in 2009 and this is the opportunity for strategic exporters”.


MARKET REPORT

China's Timber Production Plan For 2009adds Mr Van Leeuwen: “Based

on our recent travels and research in Russia and China, we believe that some of the only growth opportunities in 2009 for softwood exporters could be linked to calamities linked to the Russian log export tax. If and when the 80 percent tax is initiated, a real supply shock will be the end result, no matter how global markets are doing!”

Wood Product TradeIn an effort to respond to the effects of the international financial crisis and encourage wood products trade, China will be: increasing the rates of the export rebate tax for 117 wood products items; actively negotiating with governments of importing countries/regions such as the uS, the eu and Japan to improve market access for forest products; and encouraging a quick response to products manufactured by domestic forestry enterprises, increasing grades and specifications of products, as well as stabilising wood products exports.

In terms of furniture production, China furniture exports account for 23 percent of the world’s total and it has been the major producer and exporter of furniture in the world. The country’s furniture enterprises generated RMB210 billion during January to September in 2008, up 21 percent over the same period in 2007. The total value of furniture exports rose 23 percent to uS$19.8 billion.

However, while its wooden furniture exports fell 9 percent, the value of the wooden furniture exports rose 6 percent over the same period. The value of furniture imports grew 22 percent to uS$945 million.

Local experts predict that the total

output value of China’s furniture will exceed RMB600 billion yuan for the year and the value of furniture exports will be uS$26.6 billion.

• Rizhao: Port Of Choicealready Rizhao, a major seaport located approximately 620 km north of Shanghai has become the port of choice for log importers in the Shangdong Province.

according to statistics from its

customs, log imports through Rizhao Port (including Lanshangang) during January to February 2009 were valued at uS$13.33 million (for 126,000 m³). The figure represents a 7.7 times increase in volume and nine times the value of that in the same period of 2007.

Logs imported through Rizhao Port are mainly from new Zealand and Russia. The main timber species being radiata pine and white pine.

Trop

ical

For

est

Trus

t

exports account for 23 percent of the world's totalIn terms of furniture production, China furniture

and it has been the major producer and exporterof furniture in the world.


MARKET REPORT

according to a report from The International Tropical Timber Organization (ITTO), timber traders find Rizhao Port an attractive destination for log imports due to its advantageous location, convenient transportation and customs clearance environment, and better loading and unloading equipment. The port is able to process more than 10,000 m³ (per month) of timber at the recently established Lanshan timber processing trade demonstration zone.

according to the China national Furniture association, furniture exports reached uS$27.583 billion in 2008, up 22 percent compared with the same period in 2007. Imports were uS$1.222 billion, an increase of 10.7 percent.

• Manzhouli City: Regulation To Develop IndustryManzhouli City, one of the major areas

Logs Yuan per m3

Lauan 1900-2400

Kapur 1900-2450

Merbau 6m, 60 cm diam. 4300-5300

Teak 11000-16000

Wenge 6500-7000

Sawnwood

Teak sawn grade A 8500-9500

US Maple 2” KD 8800-11000

US Cherry 2” 14000-14200

US Walnut 2” 16000-16800

SE Asian Sawn 4m+, KD 3500-4000

Sawnwood Yuan per m3

Beech KD Grade AB 2500-3200

US Cherry, 25mm 9500-10000

US Red Oak, 50mm 9800-10500

Sapele 50mm FAS (Congo)

KD (2”, FAS) 5500-5600

KD (2”, grade A) 4500-4600

Logs Yuan per m3

Korean Pine 4m, 38cm+ diam. 1800

Mongolian Scots Pine 4m, 30cm diam. 1250

6m, 30cm+ diam. 1300

Sawnwood

Mongolian Scots Pine 4m, 5-6cm thick

1400

4m, 10cm thick 1450

Logs Yuan per m3

Okoume 80cm+ 2800-3400

Sapele 80cm+ 6000-6500

Wenge 80cm+ 13000-14000

Plywood

US Black Walnut 4x8x3 mm 6000-8000

Beech 4x8x3 mm 6000-8000

Teak 4x8x3 mm 6000-8000

Poplar (4x8x3-5 mm) 3000-4000

Guangzhou City Imported Timber Market Shanghai Furen Wholesale Market

Hebei Shijiangzhuang Wholesale Market

Logs Yuan per m3

Larch 6m, 24-28cm diam. 1170

White pine 6m, 24-28cm diam. 1300

Korean pine 4m, 30cm diam. 1450

6m, 30cm diam. 1550

Shandong De Zhou Timber Market

Tian Jin City Huan Bo Hai Timber Market

for importing Russian logs in China, has issued a new regulation to encourage, support and guide development of the wood processing industry.

The city plans to establish a fund to support the wood processing industry and help enterprises obtaining financing to support their future development, says ITTO’s april issue of Tropical Market Timber Report.

Manzhouli City is now host to 107 wood processing enterprises with total capacity of 5 million m³, of which, 30 percent have downstream processing programmes.

While the imports of Russian logs has dropped due to the export tariffs, the output value of large wood processing enterprises skyrocketed to RMB3.4 billion in 2008, registering an increase of some 130 percent over 2007, accounting for 60 percent of total industrial output value in the city.

• Inner Mongolia: Up By 52%according to a report from the erlianhot entry-exit Inspection and Quarantine Bureau, Inner Mongolia autonomous Region, some 1,490 batches of logs totalling 111,500 m³ valued at uS$16 million were accepted at the port in February 2009, up 52 percent by volume and 50 percent by value respectively over January 2009 levels.

according to ITTO Tropical Timber Report in april, the gains are attributed to the Russian government’s postponement of full implementation of its log export tariff policy to 2010, and the Chinese government adoption of a series of policies to stimulate demand for logs, increase investment and expand construction, and other stimulus measures to drive demand in its local markets. FDM

ENQUIRY NO. 4403

Tropical Forest Trust

Source: ITTO


Exhibition Preview

Sheraton Shenyang Lido HotelLiaoning, China

June 10 – 12, 2009

AHEC:

14th SoutheaSt aSia & Greater China ConventionLiaoning is the most southern of China’s three north-eastern provinces and is the gateway to the area of the Changchun and Heilongjiang provinces. The province has over 1,200 registered furniture companies in 2007 employing over 120,000 workers. Total furniture production (mainly solid wood) is valued at RMB 13 billion (uS$1.9 billion). Of this, some uS$460 million are from its exports.

Liaoning also serves as the gateway to Japan and Korea, and is an important manufacturing centre to these two countries, providing increasingly more opportunities for interior designers, furniture and timber product manufacturers.

against this backdrop, the american

Hardwood export Council (aHeC) will be holding its 14th convention, appropriately themed, the Sustainability and Diversity of uS Hardwood: Manufacturing & Design Solution. Intended for architects, interior designers, furniture designers and producers, flooring and door producers, the convention will also appeal to professors of architecture and those in interior design academies.

Topics of interest include: The Development of the Furniture and the Timber Processing Industries in northern China by the president of Liaoning Furniture assn.The Recent Development Perspective

of the Indonesia Furniture Industry by the Indonesian Furniture & Handicraft Industry assnOverview on the Opportunity for uS Hardwood in the Malaysian Furniture Industry by the Malaysian Furniture Industry CouncilThe Success & Challenge of the Hong Kong Furniture Industries by the International Furniture and Decoration (HK) assnOverview of the Thai Furniture Industry by the Thai Furniture Industry assnThe Development of the Furniture & Timber Processing Industries in Vietnam by the Handicrafts and Wood Industry assn of HCMC FDM

•

•

•

•

•

•

ENQUIRY NO. 4702

ENQU

IRY

NO.

976

Qiulin Machine

s h a n g h a i q i u l i n m a c h i n e r y c o . , lt dSHANXI QIulIN Tel: +86-354-2411812 Fax: +86-354-2411813SHANgHAI QIulIN Tel: +86-21-69151282 Fax: +86-21-69151281guANgdoNg QIulIN Tel: +86-757-27737650 Fax: +86-757-27737670Contact Person: Ms Yao Wen Mobile: +86 1390 3443900

Website: www.qiulinmc.com.cn http://qiulin.en.alibaba.comEmail: [email protected]

QIULINMACHINE

Regional Sales

Agents / Distributors

Wanted!

®

speed cover press cover press parquet production line

short cycle press collage press wood door production line

Qiulin Machine


Exhibition Review

Interzum Guangzhou 2009In its 6th year running, Interzum Guangzhou endeavoured to provide a trading platform to members of the furniture production and woodworking sectors.

(L - R) Liu Jian Jun, GM, China Foreign Trade Guangzhou Exhibition

Corp and Michael Dreyer, VP Asia Pacific, Koelnmesse

T he Guangdong province is one of the most important furniture markets in the world. experts

estimate that within a few years, China will become the fastest growing consumer market in the world for furniture. With more than 10 million new wealthy people living in China, it is further expected that up-market furniture sales will continue to show strong market growth.

In its 6th edition, Interzum Guangzhou was held at the China Import and export Fair Pazhou Complex in Guangzhou from March 27 – 30, 2009, in conjunction with China International Furniture Fair (CIFF).

More Space & ExhibitorsSigns of optimism amidst the bleak economic outlook was reflected when the event opened to a sell-out. a total of 761 exhibitors (versus 688 in 2008) occupied eight halls spanning 80,000 sq m, representing a 10 percent increase in exhibitor participation and a 33 percent increase in exhibition space despite the global economic slowdown.

Speaking of a significant trend in the Chinese domestic market at the press conference, Michael Dreyer, VP asia Pacific, Koelnmesse, said: “Due to rising affluence in China, furniture producers, manufacturers and suppliers should

also be concerned with the quality and design, and not just on pricing alone to remain competitive”.

exhibitors at the four-day trade fair reported a good response from the market. Daniel Weidner, executive sales manager, Benz GmbH, said: “We have already had a number of quality enquiries although the exhibition traffic is moving a little slower this year. However, we foresee a recovery in the third quarter that would bring about stronger sales revenues.”

Marco Rampichini, GM, SCM Group said: “The situation is actually better than what we expected. although some of our customers are still adopting a wait and see attitude, we have already communicated with them and will proceed with follow-up-action after the show”.

With local exhibitors forming the majority at the fair, Jacky Chen, sales director, union Brother (China) said: “It


Exhibition Review

China Import and Export Fair Pazhou ComplexGuangzhou, China

March 27 – 30, 2009

Live demonstration of woodworking machineries at the fair.

was a last minute decision to take part in our first Interzum Guangzhou. We are here because of the recommendations from our customers. We are pleasantly surprised by the excellent response and the overwhelming numbers of visitors.”

The appalachian Regional Commission (aRC) Pavilion from uSa is a new addition, bringing with them company representatives from all of West Virginia and parts of eight other states: Kentucky, Mississippi, new york, north Carolina, Pennsylvania, Tennessee, and West Virginia.

Workshops & SeminarsVisitors had the opportunity to network with industry suppliers on exploring new business opportunities.

Dai Jin Hui from Changzhou commented: “It was an enriching experience as we had the opportunity to pick up the latest information on the

industry. at the same time, we were able to connect with many potential new suppliers”. Ron Ziegler, an australian materials buyer for wooden furniture added: “The China market is in our development plans for the next five years and the past four days have been fruitful for us.”

aside from the product showcases on the exhibition floor, industry practitioners shared their knowledge and experience in the areas of furniture & bedding and solutions, innovations & market opportunities in a series of professional seminars.

For the first time this year, 20-20 Technologies, a provider of computer-aided design, sales software and manufacturing for the interior design industries from north america conducted a workshop on software solutions to meet the market requirements. Giben,

IMa and Canada Wood have also lent their support by holding seminars focusing on panel production and sustainability issues. a networking session organised for participants concluded these presentations.

Post-show statistics reported 60,697 in visitor attendance – an increase of 6 percent from 57,073 visitors in 2008. These trade buyers come from the DIy (Do-it-yourself) and BIy (Build-it-yourself); furniture manufacturing; furniture wholesale and retail; interior design; institutions; wood and plastic processing and wood and plastic trading sectors.

Interzum Guangzhou was jointly organised by Koelnmesse and China Foreign Trade Center (Group) and will return on March 27 – 30, 2010 at the China Import and export Fair Pazhou Complex in Guangzhou. FDM

ENQUIRY NO. 4706


Exhibition Review

Domotex Asia / ChinaFloor 2009

T he three-day Domotex asia/ChinaFloor 2009 held at the Shanghai new International expo

Center from March 24 - 26, 2009 occupied a total gross space of 89,125 sq m and attracted 909 flooring companies from 38 countries. In total, the event attracted some 36,986 professional visitors from China and abroad.

according to the organisers of the event, the show welcomed 5,020 international visitors with several buyer delegations. Visitors from the top five country of origin were from South Korea, Japan, uS, Hong Kong and Taiwan. There were a total of 4,000 designers at the show, of which 250

participated in International Interior Design & Flooring application & Development Forum 2009.

Resilient flooring section saw significant growth this year. Domestic and international brands included Tarkett, armstrong, Gerflor, Grabo, Mondo, Vertex, Serfleks, Fieloturf, and Tarkett SaS.

Brand names in this year’s parquet & laminate section included domestic notables, such as World of Friends, Lulin, Fudeli, anrantabu, Sterling Pacific, yan Kanon, new Sihe, Sino-Maple, Kanglong, a & W, Jiusheng, Plantation, Jilin Forestry Jinqiao, yihua, yongyu and Kentierwood.

Floortech asia offered front-end products from manufacturing and processing equipment, raw materials to laytech and protech technologies for after-sales market .

Featured Events• 2009 International Flooring AwardsSome 280 senior practitioners attended the awards ceremony held at Shanghai Pudong Radisson Hotel on March 24.

This year’s International Flooring awards winners were Meilidao, PTP and Kentier (Most Innovative Laminated Floor); a&W (ark) and Treesun (Most Innovative Solid Wood Floor); Sino-maple (Most Innovative engineered Wood Floor);


Exhibition Review

Dasso and yongyu (Most Innovative Green Floor); and Shine (Luxury Flooring Brand In China)

The winners of the Top Chinese Flooring Brand included Meilidao, a&W (ark), Sunyord, Treesun, Kentier, PTP and Sino-maple, while the winners of the Top International Flooring Brand went to Lamett and Dasso.

• 2009 Wood Flooring Trend Showan inaugural event, the 2009 Wood Flooring Trend Show produced five shows over a two-day period and, was used largely as a launch pad for new products, design ideas and trends.

• Sino-US-Europe Wood Flooring SummitHeld on March 26, the third Sino-uS-europe Wood Flooring Summit had representatives from the China national Forestry Product Industry association (CnFPIa), national Wood Flooring association (nWFa), european Federation of Parquet Importers (eFPI).

The summit played an important role in reducing industry trade friction between countries and enhancing the degree of openness of the market.

Topics of discussion included the Lacey act of america, FLeGT agreement between China and the eu, forest harvesting in tropical areas, eu legislation concerning due diligence, as well as the legality of imported wood.

• Lay-Tech & Pro-TechTwo new sections, Lay-Tech and Pro-Tech, provided solutions to the entire life cycle of the flooring industry from raw materials, manufacturing & processing, to installation, cleaning and maintenance.

While Laytech showed installation tools & equipment, underlays, adhesives, skirtings, mouldings and flooring locking system, Protech demonstrated cleaning & maintenance solutions, tools and equipment, oils, waxes.

Domotex asia/ChinaFloor 2010 is scheduled to take place next year from March 23 – 25 at the same venue. FDM

ENQUIRY NO. 4705


Exhibition Review

ZOW IN SheNzheNBernd Rademacher, MD, Survey Marketing + Consulting shares how his company boldly explores new frontiers by launching ZOW Shenzhen. By Therese Tan

F ounded in Germany in the mid-nineties, ZOW, the supplier fair for the furniture industry and

interior design made success in Italy, Spain, Russia, China and Turkey.

In 2004, the first ZOW was held in Shanghai, China, attracting a myriad of trade professionals in the furniture and interior design industries. This year, the event has come to Shenzhen, a special economic area and one of the most prosperous cities in southern China.

FDM asia met up with Bernd Rademacher, MD, Survey Marketing + Consulting (asia) at the event and held an exclusive interview with him. His insights on the current economic situation proved invaluable, as he shared his company’s strategies for this year, the selection of exhibitors and the event’s product innovations.

FDMAsiA: WhAt Are the strAtegies thAt survey MArketing + COnsulting Will eMplOy in 2009 tO keep AheAD OF its COMpetitiOn?Bernd Rademacher: ZOW has now branched into Southern China, which has seen recent growth as one of China’s major furniture centres and economic

hub on the Pearl River Delta region.We will also continue to co-

participate in upmarket furniture exhibitions with high volumes of international participation, as it fits the way in which ZOW is marketed.

FDM: DO yOu think the eCOnOMiC situAtiOn Will spur yOur exhibitOrs tO be MOre COMpetitive AnD OFFer A better DeAl tO their CustOMers?BR: I foresee that the economic crisis would result in improvements to the quality of components supplied to the furniture industry, which would in turn, improve the quality of the furniture produced.

using the Chinese furniture-manufacturing market as an example, advancements to its quality and design would make them more competitive in the global market – where they do not have to compete on low costs alone.

FDM: hOW DO yOu gO thrOugh the seleCtiOn prOCess FOr the exhibitOrs?BR: To keep in line with our marketing concept of becoming a leading furniture component and supply show, we have also charted a criteria for Bernd Rademacher, MD

Survey Marketing + Consulting (Asia)


Exhibition Review

ZOW Shenzhenour prospective exhibitors at ZOW. Participants will have to come from furnishing components or supplying backgrounds or they would not be offered an exhibiting space at ZOW.

In this respect, our local partner Shenzhen Furniture Trade association (SZFa) has also played a part maintaining the quality of this trade show, as many of the bookings were done through them.

FDM: Why shoulD a Furniture coMponent supplier exhibit at ZoW?BR: ZOW provides a B2B platform to people who are producing materials and components for the furniture industry. as we screen our visitors before admittance to the show, exhibitors are assured that the people they meet are from the relevant industries with whom they can build businesses with. FDM

This year, the inaugural

ZOW Shenzhen was held in

conjunction with Shenzhen

International Furniture Exhibition

(SIFE) from March 19-22.

Situated at the Furnishings

and Accessories Zone (FAZ)

of Hall 4 at the Shenzhen

Convention & Exhibition Centre,

the four day event drew 8,000

trade visitors and around 40

exhibiting companies from an

international spectrum.

Post show statistics have

reflected that the top three

countries of origins of these

visitors were Asia (90.25 percent),

followed by Europe (5.87 percent)

and USA (3.71 percent). Of the

visitors from Asia, 97.28 percent

of them originate from China,

with the remaining 2.72 percent

from the rest of Asia.

The focal point of this trade

fair was the showcase of product

innovations by exhibitors to visitors,

which was encouraged by specially

designated functional areas.

To emphasise the

‘workshop atmosphere’,

the organisers conducted

industry seminars on product

highlights and trends in

centralised forum areas on

a daily basis.

Using the chinese FUrnitUre-ManUFactUring Market as an exaMple, advanceMents to its qUality and design

WoulD MakE thEM MoRE coMpEtitivE in thE Global MaRkEt.

ENQUIRY NO. 4703

Shenzhen convention and Exhibition centreShenzhen, china

March 19 – 22, 2009

ENQUIRY NO. 4701


Exhibition Preview

China Furniture & WoodWorks 2009

D alian is a large port which has strategic significance in northeast asia. as an important port of

China, Dalian focuses on industry, trade and tourism. It is also a centre for logistics, finance and foreign exchange settlement.

The port, which links more than 300 ports in about 160 countries and regions, handles about 70 percent of cargo and 90 percent of container transport in northeast China.

Situated in the northeast asia economic area and the Bohai-Bay economic Rim, Dalian is an important link in the euro-asia relationship. Dalian’s economy has experienced rapid development since the country implemented the economic reform and opening-up policy in the late 1970s.

China Furniture & Woodworks 2009 will run from June 5 – 8, 2009 at the Dalian Star-Sea Convention & exhibition Center and Dalian World expo Plaza.

In its 14th year, China Furniture &

Dalian, ChinaJune 5 – 8, 2009

Woodworks serves as a trade platform for suppliers, manufacturers and buyers both at home and overseas.

Summer TrioThe fair this year will incorporate all three summer shows – China Int’l Furniture exhibition, China Int’l Woodworking Machinery exhibition, China Int’l Furniture Components & Raw Material exhibition under two venues.

The show area will encompass a total of 80,000 sq m and exhibitors this year range from the panel, forestry equipment complex and wood material sectors.

Jia Qingwen, president, China national Furniture association commented: “China Furniture & Woodworks has grown into a comprehensive trade fair in the north China. Diversified exhibits make the fair a real one-stop platform for purchasers, and save a lot of time and money for both suppliers and buyers.”

North Chinese Baseas an entry point to markets in north China, Japan, Korea and Russia, China Furniture & Woodworks will display a variety of northern Chinese furniture products and the latest innovations in technology.

The event is organised by Dalian northern Int’l exhibition and supported by China national Furniture association.

The fair plans to serve all vertical sectors of furniture and wood products manufacturing industries. about 40,000 visitors attended the show in 2008, including about 3000 international buyers from Japan, Korea, Russia, europe, north and South america, Middle east and Southeast asia.

These visitors come from the corporate management, manufacturing managers, financial planners, purchasing managers, production managers, technical staff, quality controllers, researchers, designers and allied workers in the furniture production and woodworking industries. FDM

ENQUIRY NO. 4720

Calendar of Events 2009

Tel: +380 322 970 627

Fax: +380 322 971 756

Email: [email protected]

Website: www.galexpo.lviv.ua/eng/events/wood.html

2-5 – ZOW Spain Feria de Zaragoza

Spain

Survey Marketing and Consulting S.L.

Tel: +34 935 407867

Fax: +34 935 408235


Website: http://www.zow.es/en/

5-8 – China Furniture & Woodworks 2009 Dalian Star-Sea Convention & Exhibition Center

Dalian Northern International Exhibition Co., Ltd

Tel: 86-411-82538681

Fax: 86-411-82538616


Website: www.sinoexhibition.com/Furniture/

index_e.asp

10-12 – SEAsia & Greater China AHEC Convention Sheraton Lido Shenyang

Shenyang, China

American Hardwoods Export Council

Tel: +852 2724 0228

Fax: +852 2366 8931


Website: www.ahec-seasia.org

8-11 – China International Building & Decoration Fair China Import & Export Fair Pazhou Complex

Guangzhou, China

China Foreign Trade Guangzhou Exhibition

Corp.

Tel: 020-26081622 / 26081623

Fax: 020-86681629-03


Website: http://www.fairwindow.com

9-11 – Woodmach Cebu 2009 Waterfront Cebu City Hotel

Cebu, Philippines

Global-Link MP Events International Inc.

Tel: +63 2 750 8588

Fax: +63 2 750 8585


Website: www.globallinkph.com

15-18 – AWFS Las Vegas Convention Center

AWFS Fair

Tel: 323-838-9440

Fax: 323-201-8246


Website: www.awfsfair.org

1-3 – Wood & Furniture Asia Karachi Expo Center,

Pakistan

Ecommerce Gateway Pakistan (Pvt.) Ltd.

Tel: +92 (21) 453 6321

Fax: +92 (21) 453 6330

6-9 – Zak Office Technology Expo Palace Grounds, Bangalore

India

Zak Trade Fairs & Exhibitions Pvt. Ltd.

Tel: +91 (80) 2521 7700

Fax: +91 (80) 2521 5511


Website: www.zakinteriorexterior.com/info/2009/

Bangalore/april/aboutevent/index.html

2-5 – Furnitech Woodtech ThailandChallenger 2, IMPACT

Bangkok, Thailand

Reed Tradex

Tel: +66 2686 7299

Fax: +66 2686 7288


Website: www.furnitechwoodtech.com/

2-6 – Kazbuild Atakent Exhibition Centre

Almaty, Kazakhstan

Iteca

Tel: 7 727 2583434

Fax: 7 727 2583444


Website: www.iteca.kz

12-16 – Interkomplekt 2009 Crocus Expo Exhibition Centre

Moscow, Russia

MVK International Exhibition Company

Tel: +7 495 925 3413

Fax: +7 499269 4262


Website: www.interkomplekt.ru

13-16 – Interzum Cologne, Germany

Koelnmesse GmbH

Tel: + 49 221 821-3216

Fax:+ 49 221 821-3908


Website: www.interzum.com

18-22 – Ligna Hannover, Germany

Deutsche Messe

Tel: +65 65 62 85 08

Fax: +65 65 62 85 10


Website: www.ligna.de

21-23 – DesignBUILD 2009 Sydney Convention

and Exhibition Centre

Sydney, Australia

Diversified Exhibitions Australia

Tel: +61 3 9261 4500

Fax: +61 3 9261 4545


Website: http://www.designbuildexpo.com.au/

index.php

22-24 – Timber & Woodworking ShowRNA Showgrounds

Brisbane, Australia

Everything Exhibitions & Events

Tel: +61 2 9974 1393

Fax: +61 2 9974 3426


Website: www.eee.net.au

26-29 – Wood Processing Ukraine 2009Palace of Sport ‘Spartak’

Lviv, Ukraine

Gal-Expo

*All details subject to change without notice. Please check with organisers for updates.

MAY

JULY

JUNE

SEPTEMBER

AUGUST

Kindly indicate the events you are interested in and fax the sheet/s along with your details in the Product

Enquiry Page on page 72a to (65) 6379 2806 or enquire online at www.fdmasia.com



055 AmericAn HArdwood export coUnciL iFc

057 AmericAn LUmBer co 51

035 BecKer AcromA 13

063 cHAn cHAo internAtionAL co Ltd (VietnAm wood 2009) 23

061 HomAG ASiA pte Ltd 1

027 HUntSmAn (BeLGiUm) BVBA 7

062 imA AG ASiA pAciFic pte Ltd 11

036 iSiS prodUctS corp 21

060 micHAeL weiniG ASiA pte Ltd 5

002 reed trAdex compAny (FUrnitecH woodtecH 2009) 31

066 ricHFrUitS mAcHinery mAnUFActUrinG co Ltd 15

059 SAiL creSt rUBBer memBrAne Sdn BHd 39

010 SAn JUi mAcHinery co Ltd 17

064 ScHeLLinG AnLAGenBAU GmBH 29

005 SHAnGHAi cmp Sinoexpo internAtionAL exHiBition co Ltd (Fmc 2009)

iBc

976 SHAnxi qiULin mAcHinery co Ltd 63

065 SHenZHen xinyUnxiAnG preciSion tooLS co Ltd 12

001 SiempeLKAmp mAScHinen- Und AnLAGenBAU GmBH & co KG 3

019 tAi cHAn mAcHinery co Ltd 9

008 tonG FonG cUtterS co Ltd 72

009 wen cHiH mAcHinery indUStriAL co Ltd 25

058 weyerHAeUSer mArKetinG oBc

016 wUxi StAinLeSS SteeL pLAte treAtment co Ltd 47

This quick reference guide is provided as an additional service. The publisher does not assume any liability for errors or ommission.

Advertising Index

www.fdmasia.com

PAge NOeNQ NO ADVeRTISeRS / AgeNCY

Legend: Advertisers with eBrochures

Head OfficeSiNGaPOReeastern trade Media Pte Ltd1100 Lower delta road ePL Building #04-02 singapore 169206Canice GanTel: (65) 6379 2888 fax: (65) 6379 2806email: [email protected]

ReGiONal SaleS RePReSeNTaTiveSTAiwAnrobert yuTel: 886-4-2325 1784Fax: 886-4-2325 2967

RePReSeNTaTive OfficeSHaNGHai, cHiNasHanGHai neW eastern Media Co. Ltd15d Block B, Victoria Plaza, no.1068, Xikang rd, shanghai, P.r, China 200060ding yong MeiTel: 86 21 6311 3676fax: 86 21 6311 2960email: [email protected]

JApAnted asoshinaTel: 81-3-3263 5065Fax: 81-3-3234 2064

KoreAyoung-seoh ChinnTel: 822-481 3411/3Fax: 822-481 3414

ENQU

IRY

NO.

008

Heavy duty helical planer cutter head with disposable knives

Helical planer cutter head with disposable knives

Adjustable planer cutterhead

Planer cutterhead with disposable knives

Safety corrugate cutter head

Single/double surface planer - helical planer cutter head with disposable knives

Welding helical planer cutterhead

All kinds of profile cutters

ENQUIRY NO. 005

SM

abundant,appealing

alder.Cabinet makers, furniture designers and woodworkers have come

to appreciate the many desirable properties of alder. It’s a beautiful

wood that regenerates naturally and grows quickly. Alder has light,

consistent color and fine grain that accepts all manner of stains. It’s also strong and has

uniform density so it machines well, has excellent turning properties, requires less hand work,

and securely holds fasteners.

Our alder is certified to the Sustainable Forestry Initiative®

(SFI), a standard that is also endorsed and recognized by

the PEFC.

Shanghai, China: 86.21.6249.9898

Vietnam/Guangzhou, China 86.20.3878.1570

Taiwan: 886.42.350.2005

Hong Kong: 852.2865.5922

E-mail: [email protected] or visit our website at wy.com

Working With reneWable

materials is not only the right

thing to do, but it offers a

competitive edge as Well.

graded for Yield.®

, and Northwest Hardwoodsare registered trademarks of Weyerhaeuser.© 2009 Weyerhaeuser Company. All rights reserved.

ENQU

IRY

NO.

058

fdm may/june 2009

Documents

fdm asia mayjune

new design

comhomag asia pte ltdtaiwan

holzma panelsizing saws

new age of thinking

holzma control software

good solutionthe new

american hardwood