www.komatsu.com Printed in Japan 201604 IP.SIN

CEN00716-00 Materials and specifications are subject to change without notice

is a trademark of Komatsu Ltd. Japan

RATED OUTPUT FD200-7 Gross: 129 kW 173 HP / 2200 min-1

Net: 122 kW 164 HP / 2200 min-1

FD250-7 Gross: 165 kW 221 HP / 2200 min-1

Net: 154 kW 207 HP / 2200 min-1

CAPACITY20000 - 25000 kg

Photos may include optional equipment.

FD200-7

FD250-7FD

250

DIE

SEL

FO

RK

LIF

T T

RU

CK

SSTANDARD EQUIPMENT

OPTIONAL EQUIPMENT

● Komatsu SAA6D107E-1 diesel engine

(U.S. EPA Tier 3 and EU Stage 3A

emission compliant)

● HPCR fuel injection system

● Electronic engine control system

● 4-Speed automatic transmission

● Heavy-duty wet disc brakes with

independent oil cooler

● Fully hydrostatic power steering

● Upward exhaust pipe

● Cyclone air cleaner (double element) with

rain cap

● Additional fuel pre-filter with water

separator

● Steel cab

● Air conditioner

● Operator's seat with suspension and

armrests

(reclining, height adjust, fore-aft adjust,

lumber support adjust and weight adjust)

● Operator Presence Sensing System

● Tiltable steering column

● Standard directional lever (left)

● Combination switch

(turn signal lamp & lamp switch)

● Speedometer

● Hour meter (service meter)

● Engine coolant temperature gauge

● Fuel gauge

● Torque converter oil temperature gauge

● Battery charge circuit caution lamp

● Air cleaner element warning lamp

● Coolant level warning lamp

● Parking brake pilot lamp

● Engine warning lamp

● Central warning lamp

● Neutral pilot lamp

● Lifting interlock caution lamp

● Headlamps (with Hi-Lo beams)

● Turn signal lamps

● Rear combination lamps

● Back-up buzzer

● Rear view mirrors

● Rear under mirror

● Fuel tank level gauge (truck side)

● Hydraulic oil tank level gauge (truck side)

● Fuel cap with key

Tire:

● Front double tires, pneumatic

● Rear single tire, pneumatic

Attachment:

● Manual type fork positioner

Fork:

● 1820 mm (standard for FD200-7)

● 2420 mm (standard for FD250-7)

● Overhead guard specification

● Canvas cab

● Front glass with wiper

● Front glass without wiper

● Heater & defroster

● Overhead guard cover

● 4-Speed manual transmission

● Cyclone air cleaner (double element) with

pre-cleaner

● Directional lever (right)

● Flash beacon (yellow, red)

● Two front working lamps (fender)

● Working lamps

(2 on mast, 2 on counterweight)

● One rear working lamp on counterweight

● Two rear working lamps on counterweight

● Back-up buzzer (large sound)

● Tilt cylinder boots

● Power steering cylinder boots

● Rear under mirrors (2pc)

● Centralized grease piping

(mast, rear axle)

● Tool kit

● Additional control valves and levers for

attachments

Tire:

● Front double tires, elastic cushion

● Rear single tire, elastic cushion

Attachment:

● Hydraulic fork positioner with side shift

function

Fork:

● 2420 mm (option for FD200-7)

● Cold district spec (-30°C)

● Sandy/dusty environment spec

(90 A brushless alternator, tilt cylinder

boots, power steering cylinder boots)

FD200-7 FD250-7

WALK-AROUND

FD200/250-7DIESEL FORKLIFT TRUCKSFD200/250-7 D I E S E L F O R K L I F T T R U C K S

32

Productivity ● High Performance Komatsu Engine ● Heavy Duty Brakes ● Automatic Transmission ● Large Fuel Tank ● Three Independent Hydraulic CircuitsSee pages 4.

RATED OUTPUT

FD200-7

Gross: 129 kW 173 HP / 2200 min-1

Net: 122 kW 164 HP / 2200 min-1

FD250-7

Gross: 165 kW 221 HP / 2200 min-1

Net: 154 kW 207 HP / 2200 min-1

CAPACITY

20000 - 25000 kg

Serviceability & Reliability ● Excellent Serviceability ● Engineered for Reliability

See page 6.

Information & Communication Technology ● Komatsu Machine Tracking System

See page 6.

Safety & Comfort ● Comfortable Cab Design ● Pillar-less Cab ● Operator Presence Sensing System

See page 5.

WALK-AROUND

FD200/250-7DIESEL FORKLIFT TRUCKSFD200/250-7 D I E S E L F O R K L I F T T R U C K S

32

Productivity ● High Performance Komatsu Engine ● Heavy Duty Brakes ● Automatic Transmission ● Large Fuel Tank ● Three Independent Hydraulic CircuitsSee pages 4.

RATED OUTPUT

FD200-7

Gross: 129 kW 173 HP / 2200 min-1

Net: 122 kW 164 HP / 2200 min-1

FD250-7

Gross: 165 kW 221 HP / 2200 min-1

Net: 154 kW 207 HP / 2200 min-1

CAPACITY

20000 - 25000 kg

Serviceability & Reliability ● Excellent Serviceability ● Engineered for Reliability

See page 6.

Information & Communication Technology ● Komatsu Machine Tracking System

See page 6.

Safety & Comfort ● Comfortable Cab Design ● Pillar-less Cab ● Operator Presence Sensing System

See page 5.

4

Komatsu develops and produces major components such as engines and engine controllers in house.

Since the engine and the truck work in harmony with “Komatsu Technology”, FD200/250-7 achieves

high levels of productivity.

High Performance Komatsu Engine

FD200/250-7 is powered by the Komatsu SAA6D107E-1

engine with 6-cylinders and 6.7liter displacement. This

engine is also used in Komatsu construction machinery, and

its durability is field-proven. The Komatsu engine is highly

efficient and environment-friendly, and brings out the

greatest performance of the truck.

Low Emissions

The Komatsu SAA6D107E-1 engine is designed to

meet U.S. EPA Tier 3 and EU Stage 3A emission

regulations, which require 40% less NOx + HC

(Hydrocarbon) emissions compared to the second

stage regulations.

Fuel Economy

Komatsu original High Pressure Common Rail (HPCR)

fuel injection system with an electronic controller

optimizes fuel combustion, realizes fuel economy and

low emissions.

Heavy Duty Brakes

Sealed wet disc brakes with independent and large capacity

brake oil cooler realize superior overheating resistance.

The brake performance is consistent even in harsh

applications. Brake discs are sealed and protected from

water, dust, and debris, therefore its service life is longer

and it is highly reliable.

Automatic Transmission

4-speed automatic transmission is equipped as standard.

A suitable gear is automatically selected accordingly

to the travel speed. The operator is freed from frequent

gear changes, and the acceleration is smooth from gear

to gear.

*4-Speed manual transmission is also available as an option

Large Fuel Tank

Large fuel tank enables non-stop multi-shift operation.

Its capacity is 400L for FD200-7 and 600L for FD250-7.

Less refueling stops means more uptime and

increases productivity.

Three Independent Hydraulic Circuits

Hydraulic circuits are independent for the lifting,

steering and brakes. They are individually driven by

three pumps, therefore lifting while steering is very

smooth.

Comfortable Cab Design

Variety of features are incorporated into the cab to enhance

operator’s work place comfort.

Suspension Seat

Suspension seat with armrests is equipped. Fore-aft, seat

height, lumber support and weight adjustments are provided.

Air Conditioner

Air conditioner has three outlet ducts, located on the front

right, left and rear of the cab. Climate-controlled air is lead

to the operator from all directions.

Full-floating Cab

Four rubber mounts insulate the cab from the chassis, thus

the operator is not directly exposed to the engine vibrations.

Large Handrails

Large handrails provide firm grips for the operator, and wide

steps enable easy entry and exit of the truck.

Operator Presence Sensing System

Operator Presence Sensing system allows traveling or lifting

only when the operator is properly positioned in the

operator’s seat. If the operator is off from the position while

traveling or lifting, traction power is disengaged*, control

levers are locked, and an alarm buzzer sets off.

* Traction power is disengaged but brakes are not automatically applied.

Pillar-less Cab

All four corners of the cab are pillar-less and enables

non-obstructed views. The superb all-around views enhance

safety of operation.

PRODUCTIVITY

FD200/250-7 D I E S E L F O R K L I F T T R U C K S

5

WA380-6FD200/250-7DIESEL FORKLIFT TRUCKS

SAFETY & COMFORT

Sealed wet disc brakes

HIGH POWER CLEAN DIESEL ENGINE

SAA6D107E

4

Komatsu develops and produces major components such as engines and engine controllers in house.

Since the engine and the truck work in harmony with “Komatsu Technology”, FD200/250-7 achieves

high levels of productivity.

High Performance Komatsu Engine

FD200/250-7 is powered by the Komatsu SAA6D107E-1

engine with 6-cylinders and 6.7liter displacement. This

engine is also used in Komatsu construction machinery, and

its durability is field-proven. The Komatsu engine is highly

efficient and environment-friendly, and brings out the

greatest performance of the truck.

Low Emissions

The Komatsu SAA6D107E-1 engine is designed to

meet U.S. EPA Tier 3 and EU Stage 3A emission

regulations, which require 40% less NOx + HC

(Hydrocarbon) emissions compared to the second

stage regulations.

Fuel Economy

Komatsu original High Pressure Common Rail (HPCR)

fuel injection system with an electronic controller

optimizes fuel combustion, realizes fuel economy and

low emissions.

Heavy Duty Brakes

Sealed wet disc brakes with independent and large capacity

brake oil cooler realize superior overheating resistance.

The brake performance is consistent even in harsh

applications. Brake discs are sealed and protected from

water, dust, and debris, therefore its service life is longer

and it is highly reliable.

Automatic Transmission

4-speed automatic transmission is equipped as standard.

A suitable gear is automatically selected accordingly

to the travel speed. The operator is freed from frequent

gear changes, and the acceleration is smooth from gear

to gear.

*4-Speed manual transmission is also available as an option

Large Fuel Tank

Large fuel tank enables non-stop multi-shift operation.

Its capacity is 400L for FD200-7 and 600L for FD250-7.

Less refueling stops means more uptime and

increases productivity.

Three Independent Hydraulic Circuits

Hydraulic circuits are independent for the lifting,

steering and brakes. They are individually driven by

three pumps, therefore lifting while steering is very

smooth.

Comfortable Cab Design

Variety of features are incorporated into the cab to enhance

operator’s work place comfort.

Suspension Seat

Suspension seat with armrests is equipped. Fore-aft, seat

height, lumber support and weight adjustments are provided.

Air Conditioner

Air conditioner has three outlet ducts, located on the front

right, left and rear of the cab. Climate-controlled air is lead

to the operator from all directions.

Full-floating Cab

Four rubber mounts insulate the cab from the chassis, thus

the operator is not directly exposed to the engine vibrations.

Large Handrails

Large handrails provide firm grips for the operator, and wide

steps enable easy entry and exit of the truck.

Operator Presence Sensing System

Operator Presence Sensing system allows traveling or lifting

only when the operator is properly positioned in the

operator’s seat. If the operator is off from the position while

traveling or lifting, traction power is disengaged*, control

levers are locked, and an alarm buzzer sets off.

* Traction power is disengaged but brakes are not automatically applied.

Pillar-less Cab

All four corners of the cab are pillar-less and enables

non-obstructed views. The superb all-around views enhance

safety of operation.

PRODUCTIVITY

FD200/250-7 D I E S E L F O R K L I F T T R U C K S

5

WA380-6FD200/250-7DIESEL FORKLIFT TRUCKS

SAFETY & COMFORT

Sealed wet disc brakes

HIGH POWER CLEAN DIESEL ENGINE

SAA6D107E

76

WA380-6

SERVICEABILITY & RELIABILITY

INFORMATION & COMMUNICATION TECHNOLOGY

FD200/250-7DIESEL FORKLIFT TRUCKSFD200/250-7 D I E S E L F O R K L I F T T R U C K S

SPECIFICATIONS

Excellent Serviceability

Easy Access

It is easy to access internal components from the top hood

and side covers. The top hood is gas spring assisted and it

can be opened and closed easily. Side covers are fitted with

latches so that they do not close unintentionally.

Serviceability is excellent and routine checks can be done

easily.

Additional Fuel Pre-filter with Water Separator

Fuel pre-filter with water separator is equipped in addition to

the main fuel filter to ensure water and contaminants are

removed. The engine and the fuel injection systems are well

protected.

Engineered for Reliability

FD200/250-7 incorporates various components that are also

used in Komatsu construction machinery. With “Komatsu

Technology”, the truck achieves high level of reliability.

High Cooling Capacity

The cooling system incorporates large capacity radiator and

after-cooler. In addition, individual oil coolers are provided

for hydraulic, brake and torque converter oil lines. High

cooling capacity enables superb overheat resistance.

Sealed Connectors for Electrics

Water tight and dust resistant sealed connectors are

incorporated to the connections between major harnesses

and controllers. The sealed

connectors are widely used in

Komatsu construction

machinery and their reliability is

well proven in the field.

Hydraulic Connections with O-ring Seals

Hydraulic connectors in the truck are flat face-to-face O-ring

seal type, which provides secure seal to prevent oil leakage.

They are also widely used in

Komatsu construction

machinery and their reliability is

field proven.

Komatsu Machine Tracking System

KOMTRAX* sends machine information via mobile phone

network and stores them in a Komatsu server. It allows you

to analyze the machine utilization, grasp the fuel

consumption, schedule the maintenance, and more.

KOMTRAX helps you to keep your machine operating at a

peak performance and reduces your operating costs.

Global Positioning System (GPS) Satellite

Mobile phone network

Server

Internet

Customer

Distributor

* KOMTRAX is available for limited countries and regions. Please check with Komatsu representatives for availability of KOMTRAX in your area.

Ch

ara

cte

ristics

1.2 Model Manufacturer's Designation FD200-7 FD250-7

1.3 Power Type Electric, Diesel, Gasoline, LPG, Cable Diesel Diesel

1.4 Operation Type Sitting Sitting

1.5 Rated Capacity Q Rated Capacity kg 20000 [16600] 25000

1.6 Load Center c Rated Load Center mm 900 [1220] 1220

1.8 Load Distance x Front Axle Center to Fork Face mm 925 [1025] 955 [1060]

1.9 Wheelbase y mm 3700 4400

We

igh

t

2.1 Service Weight kg 27670 [28500] 32850 [33500]

2.2

Axle Loading

LoadedFront kg 43715 53100

2.2.1 Rear kg 3955 4750

2.3Unloaded

Front kg 13850 15755

2.3.1 Rear kg 13820 17095

Tire

s

3.1 Tire Type Pneumatic Pneumatic

3.2Tire Size

Front 14.00-24-20PR 14.00-24-24PR

3.3 Rear 14.00-24-20PR 14.00-24-24PR

3.5 Number of Wheel Front/Rear (x=driven) 4x/2 4x/2

3.6 Tread, Front b10 mm 2230 2230

3.7 Tread, Rear b11 mm 2265 2265

Dim

en

sio

ns

4.1 Tilting Angle a / b Forward/Backward degree 6/12 6/12

4.2 Mast Height, Lowered h1 2-stage Mast mm 3640 3800

4.3 Std. Free Lift h2 2-stage Std. Mast, from Ground mm 0 0

4.4 Std. Lift Height h3 2-stage Std. Mast, from Ground mm 3000 3000

4.5 Mast Height, Extended h4 2-stage Std. Mast mm 5130 5290

4.7 Height, Overhead Guard h6 mm 3705 3705

4.19 Length, with Std. Forks L1 mm 7205 [7905] 8695 [8800]

4.20 Length, to Fork Face L2 mm 5385 [5485] 6275 [6380]

4.21 Width, at Tire b1 mm 3095 3095

4.22 Forks s/e/l Thickness x Width x Length mm 95 x 280 x 1820 [100 x 280 x 2420] 107 x 310 x 2420 [107 x 310 x 2420]

4.24 Width, Fork Carriage b3 mm 2500 [2730] 2500 [2760]

4.31Ground Clearance

m1 Under Mast mm 325 305

4.32 m2 at Center of Wheelbase mm 400 395

4.33 Right Angle Stacking Aisle* Ast plus load length mm 6175 [6275] 6805 [6910]

4.35 Turning Radius Wa mm 5250 5850

Pe

rfo

rma

nce

5.1 Travel Speed (FWD)Loaded km/h 17 24

Unloaded km/h 28 32

5.2 Lifting SpeedLoaded mm/s 270 275

Unloaded mm/s 295 285

5.3 Lowering SpeedLoaded mm/s 350 350

Unloaded mm/s 350 350

5.6 Max. Drawbar Pull Loaded 1.5 km/h, 3 min rating kN 80 103

5.8 Max. Gradeability Loaded 1.5 km/h, 3 min rating % 17 18

5.10 Service Brake Operation/Type Foot/Wet Disc Brake Foot/Wet Disc Brake

5.11 Parking Brake Operation/Control Hand/Mechanical Hand/Mechanical

5.12 Steering Type Power Steering Power Steering

6.4 Battery Voltage/Capacity at 5-hour rating V/Ah 24/88 24/88

I.C

En

gin

e

7.1Make KOMATSU KOMATSU

Model SAA6D107E-1 SAA6D107E-1

7.2 Rated Output, SAE net kW 122 154

7.3 Rated RPM min-1 2200 2200

7.3.1 Max. Torque, SAE net Nm/min-1 575/1600 931/1500

7.4 No. of Cylinder/Displacement cm3 6/6690 6/6690

7.6 Fuel Tank Capacity L 400 600

Oth

ers 8.2 Relief Pressure for Attachment Mpa 20.6 20.6

8.2.1 Hydraulic tank Capacity L 324 475

8.7 Transmission TORQFLOW TORQFLOW

Load center (mm)

Cap

acity

(kg

)

9001000 18001400

FD200

Mast height3m, 3.5m, 4m, 5m

Mast height 6m

20000

18000

1600017000

14000

1100012000

2500024000

22000

20000

18000

16000

14000

Load center (mm)

Cap

acity

(kg

)

Mast height 3mMast height3.5m, 4m, 5m

Mast height 6m

1220 1500 2100 24001800

FD250

SPECIFICATIONS

LOAD CAPACITY CURVE

* : Right Angle Stacking Aisle does not include any operational clearance.

[ ] : Value of hydraulic fork positioner with side shift function

� 2-stage free view mast

� �

h6

b11

x y

L1

Wa

b10

h3h1

h4

b1 b3

L2

maximumfork height (mm) model

Load capacity (kg) Overall height [Lowered / Extended] (mm)

FD200-7

(load center 900 mm)

FD250-7

(load center 1220 mm)FD200-7 FD250-7

3000 20000 25000 3640/5150 3800/5310

3500 20000 24000 3890/5650 4050/5810

4000 20000 24000 4140/6150 4300/6310

5000 20000 24000 4840/7350 5000/7510

6000 17000 22000 5340/8350 5500/8510

DIMENSIONS

MAXIMUM LOAD AND OVERALL HEIGHT OF MAST BY LIFTING HEIGHT

Sealed connector

Hydraulic connections

with o-ring seals

76

WA380-6

SERVICEABILITY & RELIABILITY

INFORMATION & COMMUNICATION TECHNOLOGY

FD200/250-7DIESEL FORKLIFT TRUCKSFD200/250-7 D I E S E L F O R K L I F T T R U C K S

SPECIFICATIONS

Excellent Serviceability

Easy Access

It is easy to access internal components from the top hood

and side covers. The top hood is gas spring assisted and it

can be opened and closed easily. Side covers are fitted with

latches so that they do not close unintentionally.

Serviceability is excellent and routine checks can be done

easily.

Additional Fuel Pre-filter with Water Separator

Fuel pre-filter with water separator is equipped in addition to

the main fuel filter to ensure water and contaminants are

removed. The engine and the fuel injection systems are well

protected.

Engineered for Reliability

FD200/250-7 incorporates various components that are also

used in Komatsu construction machinery. With “Komatsu

Technology”, the truck achieves high level of reliability.

High Cooling Capacity

The cooling system incorporates large capacity radiator and

after-cooler. In addition, individual oil coolers are provided

for hydraulic, brake and torque converter oil lines. High

cooling capacity enables superb overheat resistance.

Sealed Connectors for Electrics

Water tight and dust resistant sealed connectors are

incorporated to the connections between major harnesses

and controllers. The sealed

connectors are widely used in

Komatsu construction

machinery and their reliability is

well proven in the field.

Hydraulic Connections with O-ring Seals

Hydraulic connectors in the truck are flat face-to-face O-ring

seal type, which provides secure seal to prevent oil leakage.

They are also widely used in

Komatsu construction

machinery and their reliability is

field proven.

Komatsu Machine Tracking System

KOMTRAX* sends machine information via mobile phone

network and stores them in a Komatsu server. It allows you

to analyze the machine utilization, grasp the fuel

consumption, schedule the maintenance, and more.

KOMTRAX helps you to keep your machine operating at a

peak performance and reduces your operating costs.

Global Positioning System (GPS) Satellite

Mobile phone network

Server

Internet

Customer

Distributor

* KOMTRAX is available for limited countries and regions. Please check with Komatsu representatives for availability of KOMTRAX in your area.

Ch

ara

cte

ristics

1.2 Model Manufacturer's Designation FD200-7 FD250-7

1.3 Power Type Electric, Diesel, Gasoline, LPG, Cable Diesel Diesel

1.4 Operation Type Sitting Sitting

1.5 Rated Capacity Q Rated Capacity kg 20000 [16600] 25000

1.6 Load Center c Rated Load Center mm 900 [1220] 1220

1.8 Load Distance x Front Axle Center to Fork Face mm 925 [1025] 955 [1060]

1.9 Wheelbase y mm 3700 4400

We

igh

t

2.1 Service Weight kg 27670 [28500] 32850 [33500]

2.2

Axle Loading

LoadedFront kg 43715 53100

2.2.1 Rear kg 3955 4750

2.3Unloaded

Front kg 13850 15755

2.3.1 Rear kg 13820 17095

Tire

s

3.1 Tire Type Pneumatic Pneumatic

3.2Tire Size

Front 14.00-24-20PR 14.00-24-24PR

3.3 Rear 14.00-24-20PR 14.00-24-24PR

3.5 Number of Wheel Front/Rear (x=driven) 4x/2 4x/2

3.6 Tread, Front b10 mm 2230 2230

3.7 Tread, Rear b11 mm 2265 2265

Dim

en

sio

ns

4.1 Tilting Angle a / b Forward/Backward degree 6/12 6/12

4.2 Mast Height, Lowered h1 2-stage Mast mm 3640 3800

4.3 Std. Free Lift h2 2-stage Std. Mast, from Ground mm 0 0

4.4 Std. Lift Height h3 2-stage Std. Mast, from Ground mm 3000 3000

4.5 Mast Height, Extended h4 2-stage Std. Mast mm 5130 5290

4.7 Height, Overhead Guard h6 mm 3705 3705

4.19 Length, with Std. Forks L1 mm 7205 [7905] 8695 [8800]

4.20 Length, to Fork Face L2 mm 5385 [5485] 6275 [6380]

4.21 Width, at Tire b1 mm 3095 3095

4.22 Forks s/e/l Thickness x Width x Length mm 95 x 280 x 1820 [100 x 280 x 2420] 107 x 310 x 2420 [107 x 310 x 2420]

4.24 Width, Fork Carriage b3 mm 2500 [2730] 2500 [2760]

4.31Ground Clearance

m1 Under Mast mm 325 305

4.32 m2 at Center of Wheelbase mm 400 395

4.33 Right Angle Stacking Aisle* Ast plus load length mm 6175 [6275] 6805 [6910]

4.35 Turning Radius Wa mm 5250 5850

Pe

rfo

rma

nce

5.1 Travel Speed (FWD)Loaded km/h 17 24

Unloaded km/h 28 32

5.2 Lifting SpeedLoaded mm/s 270 275

Unloaded mm/s 295 285

5.3 Lowering SpeedLoaded mm/s 350 350

Unloaded mm/s 350 350

5.6 Max. Drawbar Pull Loaded 1.5 km/h, 3 min rating kN 80 103

5.8 Max. Gradeability Loaded 1.5 km/h, 3 min rating % 17 18

5.10 Service Brake Operation/Type Foot/Wet Disc Brake Foot/Wet Disc Brake

5.11 Parking Brake Operation/Control Hand/Mechanical Hand/Mechanical

5.12 Steering Type Power Steering Power Steering

6.4 Battery Voltage/Capacity at 5-hour rating V/Ah 24/88 24/88

I.C

En

gin

e

7.1Make KOMATSU KOMATSU

Model SAA6D107E-1 SAA6D107E-1

7.2 Rated Output, SAE net kW 122 154

7.3 Rated RPM min-1 2200 2200

7.3.1 Max. Torque, SAE net Nm/min-1 575/1600 931/1500

7.4 No. of Cylinder/Displacement cm3 6/6690 6/6690

7.6 Fuel Tank Capacity L 400 600

Oth

ers 8.2 Relief Pressure for Attachment Mpa 20.6 20.6

8.2.1 Hydraulic tank Capacity L 324 475

8.7 Transmission TORQFLOW TORQFLOW

Load center (mm)

Cap

acity

(kg

)

9001000 18001400

FD200

Mast height3m, 3.5m, 4m, 5m

Mast height 6m

20000

18000

1600017000

14000

1100012000

2500024000

22000

20000

18000

16000

14000

Load center (mm)

Cap

acity

(kg

)

Mast height 3mMast height3.5m, 4m, 5m

Mast height 6m

1220 1500 2100 24001800

FD250

SPECIFICATIONS

LOAD CAPACITY CURVE

* : Right Angle Stacking Aisle does not include any operational clearance.

[ ] : Value of hydraulic fork positioner with side shift function

� 2-stage free view mast

� �

h6

b11

x y

L1

Wa

b10

h3h1

h4

b1 b3

L2

maximumfork height (mm) model

Load capacity (kg) Overall height [Lowered / Extended] (mm)

FD200-7

(load center 900 mm)

FD250-7

(load center 1220 mm)FD200-7 FD250-7

3000 20000 25000 3640/5150 3800/5310

3500 20000 24000 3890/5650 4050/5810

4000 20000 24000 4140/6150 4300/6310

5000 20000 24000 4840/7350 5000/7510

6000 17000 22000 5340/8350 5500/8510

DIMENSIONS

MAXIMUM LOAD AND OVERALL HEIGHT OF MAST BY LIFTING HEIGHT

Sealed connector

Hydraulic connections

with o-ring seals

www.komatsu.com Printed in Japan 201604 IP.SIN

CEN00716-00 Materials and specifications are subject to change without notice

is a trademark of Komatsu Ltd. Japan

RATED OUTPUT FD200-7 Gross: 129 kW 173 HP / 2200 min-1

Net: 122 kW 164 HP / 2200 min-1

FD250-7 Gross: 165 kW 221 HP / 2200 min-1

Net: 154 kW 207 HP / 2200 min-1

CAPACITY20000 - 25000 kg

Photos may include optional equipment.

FD200-7

FD250-7FD

250

DIE

SEL

FO

RK

LIF

T T

RU

CK

S

STANDARD EQUIPMENT

OPTIONAL EQUIPMENT

● Komatsu SAA6D107E-1 diesel engine

(U.S. EPA Tier 3 and EU Stage 3A

emission compliant)

● HPCR fuel injection system

● Electronic engine control system

● 4-Speed automatic transmission

● Heavy-duty wet disc brakes with

independent oil cooler

● Fully hydrostatic power steering

● Upward exhaust pipe

● Cyclone air cleaner (double element) with

rain cap

● Additional fuel pre-filter with water

separator

● Steel cab

● Air conditioner

● Operator's seat with suspension and

armrests

(reclining, height adjust, fore-aft adjust,

lumber support adjust and weight adjust)

● Operator Presence Sensing System

● Tiltable steering column

● Standard directional lever (left)

● Combination switch

(turn signal lamp & lamp switch)

● Speedometer

● Hour meter (service meter)

● Engine coolant temperature gauge

● Fuel gauge

● Torque converter oil temperature gauge

● Battery charge circuit caution lamp

● Air cleaner element warning lamp

● Coolant level warning lamp

● Parking brake pilot lamp

● Engine warning lamp

● Central warning lamp

● Neutral pilot lamp

● Lifting interlock caution lamp

● Headlamps (with Hi-Lo beams)

● Turn signal lamps

● Rear combination lamps

● Back-up buzzer

● Rear view mirrors

● Rear under mirror

● Fuel tank level gauge (truck side)

● Hydraulic oil tank level gauge (truck side)

● Fuel cap with key

Tire:

● Front double tires, pneumatic

● Rear single tire, pneumatic

Attachment:

● Manual type fork positioner

Fork:

● 1820 mm (standard for FD200-7)

● 2420 mm (standard for FD250-7)

● Overhead guard specification

● Canvas cab

● Front glass with wiper

● Front glass without wiper

● Heater & defroster

● Overhead guard cover

● 4-Speed manual transmission

● Cyclone air cleaner (double element) with

pre-cleaner

● Directional lever (right)

● Flash beacon (yellow, red)

● Two front working lamps (fender)

● Working lamps

(2 on mast, 2 on counterweight)

● One rear working lamp on counterweight

● Two rear working lamps on counterweight

● Back-up buzzer (large sound)

● Tilt cylinder boots

● Power steering cylinder boots

● Rear under mirrors (2pc)

● Centralized grease piping

(mast, rear axle)

● Tool kit

● Additional control valves and levers for

attachments

Tire:

● Front double tires, elastic cushion

● Rear single tire, elastic cushion

Attachment:

● Hydraulic fork positioner with side shift

function

Fork:

● 2420 mm (option for FD200-7)

● Cold district spec (-30°C)

● Sandy/dusty environment spec

(90 A brushless alternator, tilt cylinder

boots, power steering cylinder boots)

FD200-7 FD250-7