fc114_f206709_150dpi
TRANSCRIPT
Fredriksons Conveyor FC 114 Product Catalogue
© Copyright Fredriksons Verkstads AB • 2006
FC 114
Welcome
The Catalogue contains the FC 114 Conveyor with parts.
Separate product overviews in the catalogue presents basic i nformation about the product
and order information.
© Copyright Fredriksons Verkstads AB 2006
The contents of the FC 114 Catalouge may not be
reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the
information but no liability can be accepted for any
errors or omissions. The right is reserved to make design
modifications.
Table of Contents
Page no: Products:
01. Adjustable Conveyor link ±45°
02. Rail kit for Adjustable Conveyor link ±45°
03. Curve 0-15°
04. Rail kit for Curve 0-15°
05. Curve 15°
06. Rail kit for Curve 15°
07. Curve 45°
08. Rail kit for Curve 45°
09. Curve 90°
10. Rail kit for Curve 90°
11. Drive Unit with Chain Tension
12. Rail kit for Drive Unit with Chain Tension
13. Drive Unit Short
14. Rail kit for Drive Unit Short
15. Drive Unit With
16. Rail kit for Drive Unit
17. Drive- End Unit with Chain Tension
18. Rail kit for Drive- End Unit with Chain Tension
19. End Unit
20. Rail kit for End Unit
21. Straight Conveyor Body
22. Rail Kit for Straight Conveyor Body
23. Straight Conveyor Body With Chain Tensioner
24. Rail Kit for Straight Conveyor With Chain Tensioner
25. Switch 2-1 With Chain Tensioner
26. Hose Brake
27. Chain RT 114
28. Chain RTF 114
29. Conveyor Leg, Motor Leg
30. Wall Braket
31. Accessories
32. Vertical Conveyor FCV 114
© Copyright Fredriksons Verkstads AB • 2006
01
500
35
67
Adjustable ConveyorLink ±45°
Order example:F206000-201 Adjustable Conveyor Link ±45°.Chain length = 1 metres.Rail kit on next page.
Desc. Part No.Adjustable Conveyor Link ±45° F206000-201
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Adjustable Conveyor Link ±45°
02
Order example:F206001-201 Rail kit Type A, Adjustable Conveyor Link ±45°.
TypeRail kitABCD
F206001-201F206002-201F206003-201F206004-201
© Copyright Fredriksons Verkstads AB • 2006
03
35
67
120
457
Curve 0-15°
Order example:F205992-201 Curve 0-15°.Chain length = 0.9 metres.Rail kit on next page.
Desc. Part No.Curve 0-15° F205992-201
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Curve 0-15°
04
Order example:F205996-201 Rail kit Type A, Curve 0-15°.
TypeRail kitABCD
F205996-201 F205997-201F205998-201F205999-201
© Copyright Fredriksons Verkstads AB • 2006
05
35
67
120
457
Curve 15°
Order example:F205993-201 Curve 15°.Chain length = 0.9 metres.Rail kit on next page.
Desc. Part No.Curve 15° F205993-201
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Curve 15°
06
Order example:F205996-201 Rail kit Type A, Curve 15°
TypeRail kitABCD
F205996-201 F205997-201F205998-201F205999-201
© Copyright Fredriksons Verkstads AB • 2006
07
141
35
67
120
Curve 45°
Order example:F205994-201 Curve 45°Chain length = 1.6 meterRail kit on next page
Desc. Part No.Curve 45° F205994-201
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Curve 45°
08
Order example:F205996-203 Rail kit Type A, Curve 45°.
TypeRail kitABCD
F205996-203 F205997-203F205998-203F205999-203
© Copyright Fredriksons Verkstads AB • 2006
09
Curve 90°
Order example:F205995-201 Curve 90°.Chain length = 2.5 metres.Rail kit on next page.
Desc. Part No.Curve 90° F205995-201
120
67141
35
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Curve 90°
10
Order example:F205996-204 Rail kit Type A, Curve 90°.
TypeRail kitABCD
F205996-204 F205997-204 F205998-204F205999-204
© Copyright Fredriksons Verkstads AB • 2006
11
Drive Unit R F206005-204
Drive Unit L F206005-203
Direction oftransportation
341
770
433
Drive Unit WithChain Tensioner
Order example:F206005-201 Drive Unit With Chain Tensioner, L.Chain length = 2 metres.Rail kit on next page.Motor position related to direction of transportation.L = Left R = Right
Desc. Motor PositionDrive Unit L
Drive Unit R
Part No.F206005-201
F206005-202
Other chain speeds can be supplied. Max speed is 70 m/min(depending on load and layout). Chain lubrication is required at high speeds.* Require soft start with external control system.** Frequency changer included.
**
**
**
M/Min42.5
42.5
15-50
15-50
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Drive Unit With Tensioner
12
Order example:F206006-201 Rail kit Type A, Drive Unit With Chain Tensioner.
TypeRail kitABCD
F206006-201F206007-201F206008-201F206009-201
© Copyright Fredriksons Verkstads AB • 2006
13
Drive Unit Short
Order example:F206516-205 Drive Unit Short, L.Chain length = 1 metres.Rail kit on next page.Motor position related to direction of transportation.L = Left R = Right
Desc. Motor PositionDrive Unit L
424
340
520
Drive Unit R
Part No.F206516-205
F206516-206
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Drive Unit Short
14
Order example:F206543-201 Rail kit Type A, Drive Unit Short.
TypeRail kitABCD
F206006-201F206007-202F206008-203F206009-204
© Copyright Fredriksons Verkstads AB • 2006
15
Drive Unit
Order example:F206946-201 Drive Unit Chain length = 1,5 metres.Rail kit on next page.Motor position related to direction of transportation.L = Left R = Right
Desc. Motor PositionDrive Unit L
277
550
297
Drive Unit R
Part No.F206946-201
F206946-202
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Order example:F206951-203 Rail kit Type A, Drive Unit
TypeRail kitABCD
F206951-203F206951-204F206951-205F206951-206
Rail kit for Drive Unit
16
© Copyright Fredriksons Verkstads AB • 2006
17
Drive- End Unit With Chain Tensioner
Direction oftransportation
53
2
1035
48
0
Other chain speeds can be supplied. Max speed is 70 m/min(depending on load and layout). Chain lubrication is required at high speeds.* Require soft start with external control system.** Frequency changer included.
**
**
**
Desc. Motor PositionDrive End Unit With Chain Tensioner L
Drive End Unit With Chain Tensioner R
Drive End Unit With Chain Tensioner L
Drive End Unit With Chain Tensioner R
Part No.F206010-201
F206010-202
F206010-203
F206010-204
M/Min42.5
42.5
15-50
15-50
Order example:F206010-201 Drive End Unit WithChain Tensioner, L.Chain length = 5 metresRail kit on next pageMotor position related to direction of transportationL = Left R= Right
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Drive- End Unit With Tension
18
Order example:F206011-201 Left Rail kit Type A, Drive End Unit With Chain Tension.
TypeRail kitABCD
F206011-201F206012-201F206013-201F206014-201
Motor PositionLEFT
(F206010-201)(F206010-203)
ABCD
F206011-202F206012-202F206013-202F206014-202
RIGHT(F206010-202)(F206010-204)
© Copyright Fredriksons Verkstads AB • 2006
19
End Unit
Desc. Part No.End Unit F206015-301
36
306
137
150
Order example:F206015-301 End Unit.Chain length = 0.8 metres.Rail kit on next page.
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for End Unit
20
Order example:F206016-201 Rail kit Type A, End Unit
TypeRail kitABCD
F206016-201F206017-201F206018-201F206019-201
© Copyright Fredriksons Verkstads AB • 2006
Straight Conveyor Body
6712
0
L35
21
Order example:F205987-201 Straight Conveyor Body L= 500. Chain length = 2x Conveyor length. Rail kit on next page.
L (mm) Straight Conv. Body L (mm) Conveyor Body
500 F205987-201 1000 F205987-203
750 F205987-202 3000 F205987-204
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Rail kit for Straight Conveyor Body
22
Order example:F205988-201 Rail kit Type A, L = 500 mm.
L (mm) Rail kit L (mm) Rail kit500 F205988-201
F205989-201F205990-201F205991-201
1000 F205988-203F205989-203F205990-203F205991-203
TypeABCD
TypeABCD
750 F205988-202F205989-202F205990-202F205991-202
3000 F205988-204F205989-204F205990-204F205991-204
ABCD
ABCD
© Copyright Fredriksons Verkstads AB • 2006
23
430
L120
Order example:F206025-201 Straight ConveyorWith Cain Tensioner L= 500. Chain length = 2x Conveyor length. Rail kit on next page.
L (mm) Conveyor body550 F206025-201
Straight Conveyor With Chain Tensioner
Rail D adjustable from 120-180 mm.Lower part of plastic strip is
lower than upper part of chain.
Rail C adjustable from 180-290 mm.
Rail A adjustable from 40-110 mm.
Rail B adjustable from 110-180 mm.
180 - 290
40 - 110 110 - 180
120 - 180
© Copyright Fredriksons Verkstads AB • 2006
Order example:F206438-201 Rail kit Type A
L (mm) Rail kit550 F206438-201
F206438-202F206438-203F206438-204
Rail kit for Straight Conveyor With Chain Tensioner
TypeABCD
24
© Copyright Fredriksons Verkstads AB • 2006
25
Switch 2-1 With ChainTensioner
1500
400 2
80
471
Desc.
Switch 2-1 With Chain Tensioner
Part No.F205706-
Order example:F205706- Switch 2-1 With Chain Tensioner.Chain length = 1,5 metres.Motor position related to direction of transportation.L = Left R = Right
Motor PositionL
M/Min20
Switch 2-1 With Chain Tensioner F205706- R 15-50
Other chain speeds can be supplied. Max. speed is 70 m/min(depending on load and layout). Chain lubrication is required at high speeds.
26
Hose Brake
Desc. Part No.Hose Brake F207273-101
Order example:F207273-101 Hose Brake.
475
1001000-1500
265
© Copyright Fredriksons Verkstads AB • 2006
Plastic Chain RT 114
Desc. Part no.Plastic Chain RT 114 90155-0027
Technical data, link Material: Low friction ACETAL Stainless Steel POLYAMID Moisture pick-up: 0.2 %
Technical data, rivets Material: Stainless steel
Other information:Recommended max. work load at 20°C, 200 kp/2000 N.Weight 1.6 kg/m chain.
Order information:F90155-0027 Plastic Chain RT 114.Delivers in carton, 3 m chain/carton.Specify number of metres on order.
27
© Copyright Fredriksons Verkstads AB • 2006
28
Plastic FrictionChain RTF 114
Desc. Part no.Plastic Chain RTF 114 F205728-101
Technical data, link Material: Low friction ACETAL Stainless steel POLYAMID Moisture pick-up: 0.2 %
Technical data, friction surfaceMaterial: TPE
Other information:Recommended max. work load at 20°C,200 kp/2000 N.Weight 1.6 kg/m chain.
Order information:F205728-101 Plastic Chain RTF 114.Delivers in carton, 3 m chain/carton.Specify number of metres on order.
29
© Copyright Fredriksons Verkstads AB • 2006
H
H
H = mmConveyor Leg300-600F205778-201
600-1000F205778-2021000-1400F205778-2031400-2200F205778-204
H = mmMotor Leg500-700F205934-101
700-1000F205934-1021000-1400F205934-1031400-2200F205934-104
Conveyor Leg Motor Leg
© Copyright Fredriksons Verkstads AB • 2006
30
Wall Braket, BodyF207222-101
Wall Braket, Body Wall Braket, Motor
1060
220
1060
220
Wall Braket, MotorF207222-102
31
Part No.Desc.F206315-104Holder For Emergency Stop
Part No.Desc.
F206315-101Holder For Cable Way
Part No.Desc.F206225-101Sensor Holder
Cable Trench 75x5x2500 Holder for Emergency Stop
Sensor Holder
Accessories
F206315-101Holder For Cable Way 90181-0184Joining Fitting
90181-0315Plastic Knob
90181-0191Plate Holder
90181-0188Separation Plate
90181-0180Cable Trench 75x5x2500
© Copyright Fredriksons Verkstads AB • 2006
© Copyright Fredriksons Verkstads AB • 2006
900
1540
1594
32
Desc.Vertical Conveyor
A modular conveyorsystem for mid-range loads. Suitable for the food industry or general use.
Vertical Conveyor FCV 114
Art. no.F207374-101
Fredriksons Verkstads AB • P.O Box 148 • SE-592 23 VadstenaPhone: +46 143 296 00 • Fax: +46 143 296 [email protected] • www.fredriksons.se
© F
redr
ikso
ns V
erks
tads
AB
2006
• F
C 1
14 P
rodu
ct C
atal
ogue
cod
e: F
2067
09 -e
ng