F A S T E N E R S

Product information updated May 2017 and subject to change. Please click the product links for prices and availability.

M

A/F

DkH L

MaterialA2 Stainless Steel. Also available in A4 Stainless Steel, P.O.A. Nominal screws are threaded within 2.5 thread pitches of the head. Maximum Operating Temperature: +430°C.

Socket Head Button ScrewsStainless Steel : ISO 7380 - A2 : M3 - M12

BM

BM3-6BM3-8BM3-10BM3-12BM3-16BM4-6BM4-8BM4-10BM4-12BM4-16BM4-20BM4-25BM5-8BM5-10BM5-12BM5-16BM5-20BM5-25BM5-30BM5-35BM5-40BM5-50BM6-10BM6-12BM6-16BM6-20BM6-25BM6-30

M3M3M3M3M3M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M5M5M6M6M6M6M6M6

68

101216

68

1012162025

8101216202530354050101216202530

5.75.75.75.75.77.67.67.67.67.67.67.69.59.59.59.59.59.59.59.59.59.5

10.510.510.510.510.510.5

1.651.651.651.651.652.202.202.202.202.202.202.202.752.752.752.752.752.752.752.752.752.753.303.303.303.303.303.30

2.02.02.02.02.02.52.52.52.52.52.52.53.03.03.03.03.03.03.03.03.03.04.04.04.04.04.04.0

PartNumber

ThreadM L Dk H A/F

BM8-12BM8-16BM8-20BM8-25BM8-30BM8-40BM8-50BM8-60BM8-70BM10-16BM10-20BM10-25BM10-30BM10-35BM10-40BM10-50BM12-20BM12-25BM12-30BM12-35BM12-40BM12-50BM12-60

M8M8M8M8M8M8M8M8M8M10M10M10M10M10M10M10M12M12M12M12M12M12M12

1216202530405060701620253035405020253035405060

14.014.014.014.014.014.014.014.014.017.517.517.517.517.517.517.521.021.021.021.021.021.021.0

4.404.404.404.404.404.404.404.404.405.505.505.505.505.505.505.506.606.606.606.606.606.606.60

5.05.05.05.05.05.05.05.05.06.06.06.06.06.06.06.08.08.08.08.08.08.08.0

PartNumber

ThreadM L Dk H A/F

F A S T E N E R S

Product information updated May 2017 and subject to change. Please click the product links for prices and availability.

MaterialTB340C (Grade 2 Titanium).SNPTG High intensity Titanium Alloy - Ti-15-3-3-3 (β Titanium) - available, P.O.A.Specific Gravity: 4.51.Melting Point: 1668°C. Longitudinal Elastic Modulus: 106 GPa.Thermal Conductivity: 17.16 W/(m•K).Linear Expansion Coefficient: 8.4 x 10-6 °K-1.Electrical Resistance: 0.55 µΩ•m.Amplitude Permeability:1.0001µ (Nonmagnetic).Tensile Strength: 270-410 N/mm2.0.2% Proof Stress: 165 (or higher) N/mm2.Elongation: 27% (or higher).* The Tensile Breaking Force values listed are for reference only and are not guaranteed under performance conditions.

Features• The specific gravity of titanium is approximately 60% that of stainless steel.

For use in lightweight applications, e.g. automotive, aerospace, medical and robotics.• Completely Nonmagnetic (0 Magnetic Flux Density). Nonmagnetic characteristics may be used with FPD (Flat Panel Display) and semiconductor production equipment and devices, and electronic equipment.• Excellent chemical and seawater resistance for electrochemical plating and

aquatic applications.• Chemical polishing and brightening processing improve the screw surface. Furthermore, the screws are cleanroom washed, cleanroom packed, and comply

with clean specifications that require no oil or foreign matter deposits.• For information on chemical resistance test details please contact Sales.

Cross Recessed Pan Head Machine ScrewsTitanium : M2 - M5

SNPT

SNPT-M2X5SNPT-M2X6SNPT-M2X8SNPT-M2X10SNPT-M2.5X5SNPT-M2.5X6SNPT-M2.5X8SNPT-M2.5X10SNPT-M2.5X12SNPT-M3X6SNPT-M3X8SNPT-M3X10SNPT-M3X12SNPT-M3X16SNPT-M3X20SNPT-M4X6SNPT-M4X8SNPT-M4X10SNPT-M4X12SNPT-M4X16SNPT-M4X20SNPT-M4X25SNPT-M5X8SNPT-M5X10SNPT-M5X12SNPT-M5X16SNPT-M5X20SNPT-M5X25SNPT-M5X30

M2M2M2M2M2.5M2.5M2.5M2.5M2.5M3M3M3M3M3M3M4M4M4M4M4M4M4M5M5M5M5M5M5M5

568

10568

1012

68

10121620

68

1012162025

8101216202530

3.53.53.53.54.54.54.54.54.55.55.55.55.55.55.57.07.07.07.07.07.07.09.09.09.09.09.09.09.0

1.31.31.31.31.71.71.71.71.72.02.02.02.02.02.02.62.62.62.62.62.62.63.33.33.33.33.33.33.3

840840840840

1,3801,3801,3801,3801,3802,3602,3602,3602,3602,3602,3604,1204,1204,1204,1204,1204,1204,1206,6706,6706,6706,6706,6706,6706,670

0.30.30.30.30.50.50.50.50.51.01.01.01.01.01.02.42.42.42.42.42.42.45.15.15.15.15.15.15.1

0.090.100.120.140.170.190.230.270.300.310.350.400.440.540.630.590.680.770.861.001.201.401.301.401.501.802.102.402.80

PartNumber

ThreadM L Dk H

TensileBreaking

Force* (N)

Tightening Torque

NmMass

g

M

LH

Dk

F A S T E N E R S

Product information updated May 2017 and subject to change. Please click the product links for prices and availability.

Cross Recessed Pan Head Machine ScrewsPEEK† : M1.7 - M3

SPE-P

SPE-M1.7X4-PSPE-M2X4-PSPE-M2X5-PSPE-M2X6-PSPE-M2X8-PSPE-M2X10-PSPE-M2X12-PSPE-M2.6X6-PSPE-M2.6X8-PSPE-M2.6X10-PSPE-M2.6X12-PSPE-M3X5-PSPE-M3X6-PSPE-M3X8-PSPE-M3X10-PSPE-M3X12-PSPE-M3X15-PSPE-M3X16-PSPE-M3X20-PSPE-M3X25-P

M1.7M2M2M2M2M2M2M2.6M2.6M2.6M2.6M3M3M3M3M3M3M3M3M3

44568

1012

68

1012

568

101215162025

2.53.53.53.53.53.53.54.54.54.54.55.55.55.55.55.55.55.55.55.5

0.51.31.31.31.31.31.31.71.71.71.72.02.02.02.02.02.02.02.02.0

59160160160160160160312312312312430430430430430430430430430

0.020.060.060.060.060.060.060.160.160.160.160.300.300.300.300.300.300.300.300.30

2020202020202020202020202020202020202020

PartNumber

ThreadM L Dk H

TensileBreaking

Force* (N)

Torsional Breaking

Torque* (Nm)

Quantityper

Pack

M

LH

Dk

MaterialPEEK (Polyetheretherketone), light brown. †PEEK is a registered trademark of Vitre™.Heat Resistance Temperature: 180°C. This is the value for the plastic material. The maximum operating temperature of the product changes with performance conditions such as tightening torque.* Numerical values listed above are for reference only; they are not guaranteed under performance conditions. The recommended torque is 50% of the numerical values.

Precautions for UseBecause a cumulative pitch difference is created when PEEK screws are manufactured, use these screws with nuts. If a nut is not used, use a 20 mm or less fit with female thread.

Features• PEEK is a thermoplastic super-engineering plastic with excellent physical and

chemical properties.• These screws have excellent chemical resistance. They are mostly unaffected by

chemicals excluding concentrated sulfuric acid, concentrated nitric acid, and concentrated hydrofluoric acid.

• These screws have excellent heat resistance, water resistance, and high heat resistance strength.

• These screws have excellent abrasion, shock, and fatigue resistance.• They have high incombustibility that meets V-0 of UL 94.

ApplicationsFPD production equipment, semiconductor devices, PCB etching devices, metallic surface treatment equipment and facilities, chemical plants, transformers, electrical and electronic equipment, hot water pumps, and chemical pumps.

F A S T E N E R S

Product information updated May 2017 and subject to change. Please click the product links for prices and availability.

Cross Recessed Pan Head Machine ScrewsPEEK† : M4 - M8

SPE-P

M

LH

Dk

MaterialPEEK (Polyetheretherketone), light brown. †PEEK is a registered trademark of Vitre™.Heat Resistance Temperature: 180°C. This is the value for the plastic material. The maximum operating temperature of the product changes with performance conditions such as tightening torque.* Numerical values listed above are for reference only; they are not guaranteed under performance conditions. The recommended torque is 50% of the numerical values.

Precautions for UseBecause a cumulative pitch difference is created when PEEK screws are manufactured, use these screws with nuts. If a nut is not used, use a 20 mm or less fit with female thread.

Features• PEEK is a thermoplastic super-engineering plastic with excellent physical and

chemical properties.• These screws have excellent chemical resistance. They are mostly unaffected by

chemicals excluding concentrated sulfuric acid, concentrated nitric acid, and concentrated hydrofluoric acid.

• These screws have excellent heat resistance, water resistance, and high heat resistance strength.

• These screws have excellent abrasion, shock, and fatigue resistance.• They have high incombustibility that meets V-0 of UL 94.

ApplicationsFPD production equipment, semiconductor devices, PCB etching devices, metallic surface treatment equipment and facilities, chemical plants, transformers, electrical and electronic equipment, hot water pumps, and chemical pumps.

SPE-M4X6-PSPE-M4X8-PSPE-M4X10-PSPE-M4X12-PSPE-M4X15-PSPE-M4X16-PSPE-M4X20-PSPE-M4X25-PSPE-M4X30-PSPE-M5X8-PSPE-M5X10-PSPE-M5X12-PSPE-M5X15-PSPE-M5X16-PSPE-M5X20-PSPE-M5X25-PSPE-M5X30-PSPE-M6X10-PSPE-M6X12-PSPE-M6X15-PSPE-M6X20-PSPE-M6X25-PSPE-M6X30-PSPE-M8X15-PSPE-M8X20-PSPE-M8X30-P

M4M4M4M4M4M4M4M4M4M5M5M5M5M5M5M5M5M6M6M6M6M6M6M8M8M8

6 810121516202530 810121516202530101215202530152030

7.07.07.07.07.07.07.07.07.09.09.09.09.09.09.09.09.0

10.510.510.510.510.510.514.014.014.0

2.62.62.62.62.62.62.62.62.63.33.33.33.33.33.33.33.33.93.93.93.93.93.95.25.25.2

765765765765765765765765765

1,2301,2301,2301,2301,2301,2301,2301,2301,6701,6701,6701,6701,6701,6703,0903,0903,090

0.640.640.640.640.640.640.640.640.641.281.281.281.281.281.281.281.282.262.262.262.262.262.265.985.985.98

2020202020202020201010101010101010101010101010 5 5 5

PartNumber

ThreadM L Dk H

TensileBreaking

Force* (N)

Torsional Breaking

Torque* (Nm)

Quantityper

Pack

F A S T E N E R S

Product information updated May 2017 and subject to change. Please click the product links for prices and availability.

Hexagon Head Machine ScrewsPEEK† : M4 - M10

SPE-H

H

M

L A/F

L1

MaterialPEEK (Polyetheretherketone), light brown. †PEEK is a registered trademark of Vitre™.Heat Resistance Temperature: 180°C. This is the value for the plastic material. The maximum operating temperature of the product changes with performance conditions such as tightening torque.* Numerical values listed above are for reference only; they are not guaranteed under performance conditions. The recommended torque is 50% of the numerical values.

Precautions for UseBecause a cumulative pitch difference is created when PEEK screws are manufactured, use these screws with nuts. If a nut is not used, use a 20 mm or less fit with female thread.

Features• PEEK is a thermoplastic super-engineering plastic with excellent physical and

chemical properties.• These screws have excellent chemical resistance. They are mostly unaffected by

chemicals excluding concentrated sulfuric acid, concentrated nitric acid, and concentrated hydrofluoric acid.

• These screws have excellent heat resistance, water resistance, and high heat resistance strength.

• These screws have excellent abrasion, shock, and fatigue resistance.• They have high incombustibility that meets V-0 of UL 94.

ApplicationsFPD production equipment, semiconductor devices, PCB etching devices, metallic surface treatment equipment and facilities, chemical plants, transformers, electrical and electronic equipment, hot water pumps, and chemical pumps.

SPE-M4X8-HSPE-M4X10-HSPE-M4X15-HSPE-M4X20-HSPE-M4X25-HSPE-M5X10-HSPE-M5X15-HSPE-M5X20-HSPE-M5X25-HSPE-M5X30-HSPE-M6X10-HSPE-M6X12-HSPE-M6X15-HSPE-M6X20-HSPE-M6X25-HSPE-M6X30-HSPE-M6X35-HSPE-M6X40-HSPE-M8X10-HSPE-M8X15-HSPE-M8X20-HSPE-M8X25-HSPE-M8X30-HSPE-M8X40-HSPE-M8X50-HSPE-M10X20-HSPE-M10X25-HSPE-M10X30-H

M4M4M4M4M4M5M5M5M5M5M6M6M6M6M6M6M6M6M8M8M8M8M8M8M8M10M10M10

8101520251015202530101215202530354010152025304050202530

7777788888

101010101010101013131313131313171717

2.82.82.82.82.83.53.53.53.53.54.04.04.04.04.04.04.04.05.55.55.55.55.55.55.57.07.07.0

Full ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull ThreadFull Thread

27Full ThreadFull ThreadFull Thread

765765765765765

1,2301,2301,2301,2301,2301,6701,6701,6701,6701,6701,6701,6701,6703,0903,0903,0903,0903,0903,0903,0904,9004,9004,900

0.640.640.640.640.641.281.281.281.281.282.262.262.262.262.262.262.262.265.985.985.985.985.985.985.98

10.8010.8010.80

0.260.290.360.420.480.460.590.670.780.880.750.810.931.001.201.301.501.601.601.902.102.402.803.404.104.004.404.80

101010101010101010101010101010101010 5 5 5 5 5 5 5 1 1 1

PartNumber

ThreadM L A/F H L1

Tensile Breaking

Force* (N)

Torsional Breaking

Torque* (Nm)Mass

g

Quantityper

Pack