false ceiling
TRANSCRIPT
FALSE CEILING
CONTENTS
FALSE CEILING
INTRODUCTION
PURPOSE
ADVANTAGE OF FALSE CEILING
TYPE OF FALSE CEILING
FALSE CEILING TYPES:MATERIALS
RATE
Site visit
CASE STUDY
compsanies
CONCLUSION
PURPOSE :It improves aesthetical appearance( form, color, treatment etc.) & proportions by
managing room – heights Hides electrical cabling & provides space for recessed lights Air-conditioning – hides ducting & reduces the volume of room Ugly structural
members like beams, etc that usually spoil the ‘look’ of the room are concealed/ camouflaged.
Provides insulation from heat. Acoustical improvement. soundproof rooms such as meeting rooms, auditoriums, etc, which require a quit
environment? As a design element.
A false ceiling is a ceiling that is suspended from the main ceiling. The suspension is fixed to the walls, roof or beams of the superstructure. In simpler words, a false ceiling is a second ceiling created bellows the original. It gives a beautiful homogeneous appearance and smooth finish.
WHAT IS FALSE CEILING ?
INTRODUCTION
ADVANTAGE OF FALSE CEILING
The various advantages of False Ceilings making them suitable for India:
•Durability•Light Weight•Portability•Waterproof•Fire Resistant•Mild Acids and Alkali Resistant•Unharmed by Fungus or Termites•Easy Installations
TYPE OF FALSE CEILING
Suspended ceilings are a type of architectural design element used in commercial and residential buildings. They are created using metal grid systems, which are suspended below the ceiling or roof deck using a series of wires. The grid is then filled in with ceiling tiles, which are primarily made from mineral fiber blends.
Exposed Grid•Exposed grid varieties are the most common type of suspended ceiling.
•They consist of long metal strips, called "mains," which are interconnected with shorter metal pieces known as "tees."
•Together, the mains and tees form a grid system ,which are then filled with acoustical ceiling tiles.
Concealed Grid•Concealed grid systems use the acoustical tiles to hide the grid system from view. •This creates a smooth, clean which is aesthetically pleasing. •The tile used has a small groove built into it's perimeter, which slides over the mains and tees to cover them. •This type is more expensive than an exposed system.•It makes difficult for maintenance to access areas above the ceiling.
CONCEALED GRID CEILING
Characteristics :
•Monolithic appearance
•Suspension from concrete soffit surface
•Ventilation ducts and other services accommodated in plenum.
•Easy to create bulk heads and change levels
•Access panels provide service access.
•Special load bearing ceilings available.
Installations : concealed grid ceiling
Installations : concealed grid ceiling
EXPOSED GRID CEILING
Characteristics :
•Attractive pre-finished white surface
•Provides sound attenuation and absorption
•Electrical and other services accommodated in plenum
•Wide range of ceiling panels giving smooth, textured, patterned or perforated effects.
EXPOSED GRID CEILING
EXPOSED GRID CEILING
FALSE CEILING TYPES : PROFILES
Visible profile ceilings• •In this very common system.• profiles are always visible. • Ceiling tiles rest on the profiles and are in most cases made from a mineral material. • The two standard module sizes are 300 mm and 312,5 mm. • The most popular tiles in this type of ceiling are for ceiling grids of 600x600 mm and 600x1200 mm.• In this type of ceiling, luminaries will be mounted as an inlay
ApplicationsThese ceiling types are usually used when electrical wiring, LANs and other technical installations are hidden behind the ceiling. Also in this application the ceiling should contribute to the acoustic environment. All Philips recessed luminaries are suitable for this kind of ceiling.
1. VISIBLE PROFILE CEILING2. CONCELED CEILING3. STRIP CEILING4. PANEL CEILING
1. This ceiling system consists of main carriers on which metal strips are clicked.
2. They have various widths.3. Luminaries are usually mounted in line
with the strips and perpendicular to the main carriers.
4. In that case, a length profile mounted to the side of the luminaries is required, or suspension brackets at the head of the luminaries when the luminaries fits in exactly between two main carriers. (See figures)Applications
Areas like corridors, airports, etc.
STRIP CEILING
The main carriers of these systems are usually placed at the main building modules. These are often 1200 or 1800 mm.
Ceiling panels are mounted between the main carriers. In this type of ceiling, metal and mineral panels are used. If the distance between the main carriers does not fit with the luminaries length these luminaries can be lengthened so that they can be mounted between the main carriers.
For profile A, the luminaries can be mounted as an inlay. Safety brackets can be delivered on request with the luminaries.
When profile B is used, brackets are required and must be ordered separately. Also a 100% copy of the ceiling tile can be used with integrated luminaries.
ApplicationsAreas where removable partition walls are used and acoustic performance of high quality is
required. In corridors each panel can span the total width (e.g. 1.8 m).
PANEL CEILING SYSTEM
1. GYPSUM BOARD FALSE CEILING
2. METAL CEILING PANELS
3. FIBREBOARED AND FIBRE/MINRAL REINFORCED TILES
4. P.O.P. FALSE CEILING
5. PLYWOOD FALSE CEILING
6. E-BOARD FALSE CEILING
7. ALLUMINIUM CEILING
8. ARMSTRONG TILES FALSE CEILING
FALSE CEILING TYPE : MATERIALS
GYPSUM BOARD / GYPBOARD CEILING
These gypsum board ceiling are renowned as the thermostat keeps the surrounding pleasant and cool and they are sound resistant.
Lightweight, flexible and fire and moisture resistant, gypsum is most commonly used for false ceiling.Gypsum board panels are tough, versatile and economical, and are fast replacing other ceiling materials such as POP. Gypsum board can be used while constructing false ceiling. as well as to renovate old ceilings.The material is fire-resistant, waterproof, as well as soundproof, which is why it is the most preferred material for false ceiling.A gypsum panel could have tapered or square edges.Panels with tapered adage are used for ceiling since the gap between each edge can be filled, to give a smooth surface.Square-edges board can be used. Where visibility of the joints is a requirement.
A suspended Gypsum board ceiling can be constructed by nailing Gypsum board panels to each other, or by fixing the panels in a metal grid (usually steel). Generally, gypsum panels of 600 mm×600mm are used.
GYPSUM BOARD / GYPBOARD CEILING
PHYSICAL PROPERTIES AND PERFORMANCE
Installation overview
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Rawl plug fixed into the soffit
Perimeter channel fixed to the wall at required ceiling
Intermediate channel connected to the ceiling angle at required suspension height
Intermediate channel and ceiling section are connected with each other by using connecting clip
Plasterboard screw fixed with drywall screw in staggered joint manner.
Plasterboard fixing complete, ready For jointing and finishing.
jointing and finishing is done on tapered edge joint.
Finished flush seamless ceiling.
GYPSUM FALSE CEILING
• Thickness 9,5 12,5 15
(mm)
• Edge SE/TE SE/TE TE
• Length (mm) 610,1220, 610,1220,1830, 2438 &
1830 & 2438 2438 & 3048 3048
• Width (mm) 610 &1220 610 & 1220 1220
• Weight kg/m2 8,0 10,50 12,80
• Thermal 0,16W/mk 0,16W/mk 0,16W/mk
Conductivity
• Thermal0,06m2K/
W 0,08m2K/W 0,09m2K/W
Resistance
GYPSUM FALSE CEILING
TECHINICAL DETAIL
Three Range based on :
Aesthetics• Characteristics:
• panel has perforations in random pattern and are economical, durable and dimensionally stable.
• pre-painted and cooled with special paint which is washable and has anti-mould growth and anti -yellowing properties.
• Applications :
• open areas in office spaces• reception areas• showrooms
Functional performance
• Characteristics:
• ceiling panels has vinyl laminate or PVC film on the face side for a superior maintenance free surface and is available in a granular texture
• Applications:
• hospitals• electronics• pharmacy companies
Acoustical performance
• Characteristics:
• This ceiling panel has square holes in regular pattern and is backed with a special non woven lining.
• This range provides "excellent sound absorption properties with insulation mat.
• Applications ;
• Multiplexes &cinema halls
• auditoriums• sound recording studios• educational institutes
Gyp
sum
Boa
rd C
eili
ngs
: C
hara
cter
isti
cs
METAL CEILING
Lay In - Plain
Characteristics
Plain panels are power-coated, produced from high quality hot dip galvanized steel offering the best corrosion protection.
Lay In - Perforated
Characteristics
Perforated panels are power-coated, produced from high quality hot dip galvanized steel offering the best corrosion protection. Infill of 0.4 mm high quality glass fibre acoustic fleece.
Clip In - Plain
Characteristics
•Plain panels are power-coated, produced from high quality hot dip galvanized steel offering the best corrosion protection.
Clip In - Perforated
Characteristics
•Perforated panels are power-coated, produced from high quality hot dip galvanized steel offering the best corrosion protection.•Infill of 0.4 mm high quality glass fibre acoustic fleece.
METAL CEILING
METAL CEILING
METAL CEILING
METAL CEILING
METAL CEILING
T-Cell Open Plenum
Characteristics:•These panels create decorative and functional open ceiling environments. •It has wide variety of cell sizes.
Applications:•Hospitals• Retail•Galleries•Offices
METAL CEILING
DESCRIPTION
Thanks to the linearity of its shapes, the system Enigma is sure the most uniform solution among the range of Atena ceilings. This version offers not only an elegant and aesthetic impact, but also a simple and fast way of laying and dismantling making easier the inspection
to the interspace.
FEATURES
• Concealed structure (clip' in system)• Bevelled edge 45° or right edge• Accessibility to the interspace using the dismantling flat• Prepainted and powder coated• Wide range of perimeter solution• Single and Double supporting structure• Easy laying
SECTION
PRODUCTS – METAL MODULAR – ENIGMA METAL FALSE - CEILING
ADVANTAGE OF METAL CEILING
METAL CEILING
MetalWorks Mesh - Expanded Metal
MetalWorks Mesh - Welded Wire
MetalWorks Mesh - Woven Wire
MetalWorks Open Cell
MetalWorks Plank
MetalWorks 3D
Metal Works canopy MetalWorks Capz
MetalWorks Concealed
MetalWorks Linear
MetalWorks Wings
MetalWorks Vector and Vector Exterior
MetalWorks Tin
MetalWorks Plank
METAL CEILINGS – STANDARD ( ARMSTRONG )
Metal Works Open Cell Systems
Key Selection AttributesLock-in System - Premium Option
Unframed panels connect to mounting and cross rails for self-suspending system - no other grid needed
System components include 2' x 2' panels, 8' mounting rails with connectors, 2' cross rails, and suspension clipsAvailable in white in four interior cell sizes (3", 4", 6" and 8")Custom sizes and colors also availableDurable, powder-coated painted finish
Lay-in System - Standard OptionFramed 2' x 2' panels lay in standard 9/16" T-bar gridFast, easy installationAvailable in white in four interior cell sizes (3", 4", 6" and 8")Durable, powder-coated painted finishCustom sizes and colors are also available
Capz – Metal Works, Optima, & Spectra
Metal Works Canopies
EFFECTSWood Looks MetalWorks SecureLock
Advantages of metal ceiling:
They reduce overall cost, since they are easy to install and access.Hidden services can be easily accessed since the panels are removable.They are ideal for workspaces which require clean environments and services that require maintenance such as the machinery rooms, the AHU, etc.They have a monolithic look.They give the space a very modern look and blend well with glass.
METAL CEILING
•excellent sound absorption•special anti-sag property•superior moisture resistance•Better fire resistance•good light reflectance •better relative humidity properties when compared with conventional mineral fibre tiles.• high insulation against sound and fire.•material can be decorated with paint or other finishes improving the aesthetics of the room.
Applications:
•shopping malls•Retail showroom•Offices •Education•Healthcare •Restaurants
FIBERBOARDED AND FIBRE / MINERAL FIBER CEILING
THICKNESS -14 -20 mm
PLASTER OF PARIS (POP ) CEILING
Plaster of Paris (POP) is commonly used for constructing false ceilings. Gypsum, which gives out water when heated, makes POP. Post-heating, gypsum softens and is then crushed to form a powder. POP hardens instantly when water is added to it. It is applied to fibreboard or a wood base, which is then suspended to form the false ceiling.
Advantages of POP:
A smooth, uniform finish. The surface can be recorded or painted. POP false ceiling are easy to construct and maintain. The ceilings are reality light.
Thickness- 10-15 mm
PLY WOOD FALSE CEILING
Plywood ceiling are widely used for their visual appeal. These ceilings are created with strips of ply glued or nailed together. The strips are held together and strengthened with ply supports at equal distances. Ply ceiling are generally used in place with cold climates.
Advantage of ply ceilings:They are strong and look appealing.They can be given various finishes, or painted to get the right look.They can be treated to increase their lifespan.However, ply ceiling are difficult to maintain, since the are prone to termite attacks. The room has to be thermally controlled to reduce the humidity in the air. Also, the wood is prone to warping and other physical changes, with time.
E-BOARD FALSE CEILING
standard weight (Per sq.mt ) 5.5 kgEquilibrium moisture 2 to 6%Thermal conductivity 0.18kcal/MH degree CBiological affect no fungal effectEffect of relative humidity 0.2%
STANDARD SIZES 2.44 m x 1.22 m (8' x 4')
1.83 m x 1.22 m (6' x 4') 1.22 m x 1.22 m (4' x 4') 1.22 m x 0.16 m (4' x 2') 0.61 m x 0.16 m (2' x 2')
Thickness 4 mm, 5 mm, 6 mm
E-BOARD FALSE CEILING
ALUMINIUM FALSE CEILING
ALUMINIUM FALSE CEILING
ALUMINIUM FALSE CEILING
ARMSTRONG TILES
Canopies, Clouds, & Baffles
Key Selection Attributes30 standard fabric and sailcloth finishes available100% post-consumer woven fabrics coordinate with Soundsoak® Wallsand DiffusersImprove acoustics with excellent sound absorptionOn average, one baffle per 40 square feet, or 20% coverage, reduces reverberation time by approximately 50%Easy to install with sleek, adjustable aircraft cable hanging kit Seismic approved Additional colors, sizes, and edge details available
Baffles
2' x 4' size with fabric and sailcloth finish options. Baffles use either a grommet or eyehook for attachment or suspension from structure. 2' x 4' x 2" Baffles have an eyehook and 2' x 4' x 1-½" Baffles have a grommet.
MATERIAL N FINISHESBaffles have a rigid fiberglass core encased in fabric or nylon.30 standard color options
1.Baffle Hanging Kit – Fully Suspended
2. Attach to Bar Joists – Parallel
I n s t a l l a t i o n
Soundsoak Baffles can be independently suspended using the Baffle Hanging Kit . Each kit contains 2 8-1/16” aircraft cables, 2 carabineers and 2 quick release adjusters.You must have a hole to loop the aircraft cable through the anchor. Slip the quick release adjuster onto the cable. NOTE: the cable is inserted into the large rectangular hole as noted by the arrow.
Next, thread the end of the cable back into the other end of the adjuster to secure the cable loop onto the anchor. Adjust the elevation of the cable carabiner to be at the top of the baffle. To release the cable, take all weight off the adjuster, use your thumb to pull the side release tab down and simply slide the cable out as needed. Snap carabiner into the Baffle grommet or eyehook. If needed, adjust the elevation using the quick release adjuster to level.
Soundsoak Baffles can be wire tied directly to the top or bottom of bar joists. These Baffles will be parallel to the bar joists
. Baffles attached at the top will hang beside the joist. Baffles attached at the bottom will hang below the joist. Thread the tie wire through the grommet or eyehook and then around the bar joist. Twist the wire to complete the connection.3. Attach to Bar Joists – Perpendicular
can be installed perpendicular to the bottom of bar joists. Install a tight cable support system (by others) for baffle attachment. Secure anchors at both ends into the wall. Attach the cable, thread the cable above the lower bar of the joists, and use a turnbuckle to tighten the cable. For long runs of cable or wide spacing of bar joists, addition vertical cable
4. Direct to Structure
Attach the appropriate anchor to structure. Thread the tie wire through grommet or eyehook in baffle. Next thread the tie wire through the hole in the anchor. Twist wire to complete the connection. Do not over tighten wire or put excessive force on grommet, this may cause Baffle failure. Tie wires should be plumb, avoid wires at angles that cause stress to the grommets or eyehook.
support may be required. Attach baffle to cable with tie wire. Tie wire connection should be snug to cable to minimize Baffle slippage.
Sustainable Products (Armstrong)
MINERAL FIBER
High % of Recycled ContentCeiling-2-Ceiling options with high post-consumer recycled content from our closed loop process100% RecyclableAirGuard™, the first coating for ceiling tiles that actively removes formaldehyde and other aldehydes in indoor airNo Added Formaldehyde Products30 Year Performance GuaranteeMultiple Manufacturing LocationsContributes to LEED MR Credits
FIBERGLASS CEILINGS70-75% recycled contentEnergy-saving high light-reflective finishRecyclableSubstrate resists mold/mildew and bacterial growthSmooth, clean, durable finishLightweight, easy to handleNew Optima® fiberglass substrate made with aplant-based binder
SUSPENSION SYSTEMS
63% High Recycled Content (HRC) Grid available as standard option (Interlude, Prelude, and Suprafine)All Armstrong suspension systems contain 30% recycled content, with the highest percentage of post consumer content in the industry (23%)The only standard High Recycled Content Drywall Grid and Framing System in the industry. Selected items available in HRC with a total Recycled Content of 61% (Post Consumer 53%, Pre Consumer 8%)RecyclablePatented Peak Form for extra strength & StabilityRotary stitched for additional strength and stabilityMultiple manufacturing locations
TECHZONE
Energy Savings SystemCost Savings and Increased Light LevelsEarn up to 3 LEED Credits wit Hi-LR ceilingsHigh Recycled Content Options100% Recyclable
FALSE CEILING TYPE
GYPSUM BOARD
METAL CEILING PANELS
FIBREBOARED AND FIBRE/MINRAL REINFORCED TILES
P.O.P. FALSE CEILING
PLYWOOD FALSE CEILING
E-BOARD FALSE CEILING
ARMSTRONG TILES FALSE CEILING
₨ 40 /pc(s).
Price:
used in theatres, libraries, lounges, shops, cafeterias, cloakrooms and canteens.
various sizes and coloursairport terminals, metro stations, hospitals, pharma units and shopping malls.
homes, offices, restaurants, hotels, malls, hospitals
they are sound resistant.
Any type of suspended ceiling will be expensive. The cheapest route is drywall.
Price: ₨ 50 /pc(s).
Rs20 sft.
POP false ceiling:• 30/- per sft. to soon depend upon the design & Pattern.
• Labor cost is high.
Gypsum board false ceiling:• Plain gypsum board ceiling panel: 40/- per sft.
• Gypsum board poly Ceiling panel: 47/- per sft.
• Gypsum board PVC laminated Ceiling panel: 70/- per sft.
• Gypsum board Semi Perforated Ceiling panel: 48/- per sft.
• Gypsum board Fully Perforated Ceiling panel: 60/- per sft. without glass-wood.
• Gypsum board Fully Fissured Ceiling panel: 60/- per sft.
• Gypsum board Silt Ceiling panel: 64/- per sft. without glass-wood.
RATES OF DIFFERENT FALSE CEILING
1.Under construction (ceiling completed) Sector 15 ,house no :2715
2.Under construction Sector 13 ,house no :294
SITE VISIT
3.Under construction Sector 13 ,house no :2944. Liberary (dcrust,murthal)5.Metro station
Under construction (ceiling completed)Sector 15 ,house no :2715
Suspended pop ceiling with different levels
Pop ceiling in the kitchen area
Space for cove light
Space for cove light
Material used in pop ceiling is:Wire messPopWooden plank (used for finishing the pop).The frame which hold the slab with the wire mess and pop ceiling.
Wire mess supported by frame (fasner n pati )and over it the pop is done
Size of jali 50’x4’)20 kg putti of 120,150,180….depending upon the type of company.(sakarni plaster)
Under construction Sector 13 ,house no :294
Pop ceiling with +,-
Different design of pop ceiling
The cost of these ceiling is less as there is no use of frame,wire mess used
One of the best method for pop ceiling with is quiet cheaper as compare to suspended pop ceiling.
+ - 00
+ 20mm it
It takes about 4 hrs to dry complete layer.
Pop is done in different layers one over the another depends upon how much thick pop a client wants.
1 layer (pop)= 4mm thick = takes 15 min to dry
Under construction Sector 13 ,house no :294
1.Ist the ceiling design is drawn on the slab with the help of thread (soot).
2.Then the Patti is connected to the slab by fasner/bolt
3.The distance between the two patti is 1’
Connected to slab
Connected to wire mess
A
DETAIL A
3.Connected to wire mess
4.C-channel connected with fasner/bolt
5 c-channel connected with fasner/bolt at a distance of 1’.
6. Now the whole frame will be covered with wire mess and then the pop layer will start.
Space for cove light.
In Pop suspended ceiling channels at the side of the wall is never done…..
Under construction Library of college
•4’x4’ gypsum board used in the ceiling
Gypsum board ceiling
•2.5’ suspended gypsum ceiling from the 0.0 lvl
•‘W’ channel used in gypsum ceiling
•Wall angles are available in 10’ length:-•L-shaped moulding that supports and finishes the ceiling around its perimeter.
•Gypsum board panels to each other, or by fixing the panels in a metal grid (usually steel).
•Generally, gypsum panels of 600 mm×600mm are used.
Under construction Library of college
•Gypsum board used around the grid ceiling.
•The space above this ceiling is often used as a plenum space for ventilation systems, requiring only enclosed ducts that deliver fresh air into the room below. Return air enters the ceiling space through open grilles across the ceiling.
•The ceiling consists of a grid-work of metal channels in the shape of an upside-down "T", suspended on wires from the overhead structure. These channels snap together in a regularly spaced pattern – typically a 2×2 or 2×4 foot grid or 600×600 mm grid
•Each cell is filled with lightweight "tiles" or "panels" which simply drop into the grid.
plenum space
Under construction Library of college
•Most tile material is easily cut to allow fixtures in other shapes, such as incandescent lights, speakers, and fire sprinkler heads.
Metro station
Gypsum board panels used in metro ceiling
The grid of the ceiling is suspended by metal channel
•Wall angles, main tees and cross tees used in making the grid for gypsum ceiling
CASE STUDY OF FALSE CEILING (JEWELLARY SHOWROOM)
SHOPPING MALL (AMBIANCE ,GUDGAON)KIOSKSHOWROOM BAKERY SHOP
JEWELLARY SHOP
Front elevation
L SHAPE TABLE FOR DISPLAY OF JEWELLARY (Ht. 2.5’). SQUARE SHAPE WOODEN BOX OF (1.2’,1.2’ ) FOR DISPLAY OF JEWELLARY AT 5’HT .
STORE
SEATING
SHOPPING MALL (AMBIANCE ,GUDGAON)
JEWELLARY SHOP
Reception area where the customer can discuss about there design of jewellary.Store area.Wooden L-shape table which serves as display.Glass façade on all four sides of shop.
STORESEATING
Pop false ceiling with resist lights used.Elevations is treated with wooden lines..in curve patterns..
19 mm board of Amul Teak wood is used in furnitures and elevation design which is at cost of Rs. 44/sq.ft.
Display boards are finished with Veneer, Donipolo in size 10’x5’ at cost of Rs. 154/sq.ft. P.O.P. of Gyptone at cost of Rs. 25/kg.is used in false ceiling, Wire Mesh is used in P.O.P. at cost of Rs.550 per sheet. Dulux Paint is used.
Types of Displays in jewellery shop
JEWELLARY SHOP
Square of 1.5’ ,1.5’ (ht.4’) embeded in marble stone wall elevation . L- shape table 2’ wide which serves as counter as well as display for jewellary. Sq box made of wood is used in the front elevation for display. Stolls
STOOL FOR DISPLAY OF JEWELLARY
SQUARE EMBEDED IN A MARBLE WALL FOR DISPLAY (SIDE ELEVATION)
SQ MADE OF WOODEN IN FRONT ELEVATION
JEWELLARY kiosk
Equilateral Triangle in shape.size :7’x7’x7’Ht 7’ (easily approcachable)
PLAN
Storage space 1’ wide ,3’ high
JEWELLARY SHOP
ENTRANCE
COUNTER AT 3’ Ht.
DISPLAY AREA
3 D VIEW OF JEWELLARY KIOSK
19 mm board of Amul Teak wood is used in furnitures which is at cost of Rs. 44/sq.ft.
Display boards are finished with Veneer, Donipolo at cost of Rs. 154/sq.ft.
Jewellary showroomDelhi
Pop ceiling in the jewellary showroom
6” suspended pop ceiling from the 0.0 lvl
Conceal lights are used in this showroom
A big colored glass used in the middle of pop ceiling. It has 8’ diameter and a light install in between glass
JEWELLARY SHOWROOM
LOCATION : NIRANKARI JEWELLERS ,Edward Line,Kingsway Camp, delhi-110009 (Near civil lines area)
Fabric glass used in ceiling with the wooden molding of teak wood finished with veneer as per approved
Pop ceiling with cove light
Ceiling of entrance lobby.Resist lights used in the false ceiling
Split ac used .
19 mm board of Amul Teak wood is used in furnitures which is at cost of Rs. 44/sq.ft
P.O.P. of Gyptone at cost of Rs. 25/kg.is used in false ceiling,
Wire Mesh is used in P.O.P. at cost of Rs.550 per sheet.
entrance
staircase
Bakery shop
entrance
staircase
Ceiling on the entrance made of teak wood finished with veneer as per approved with resist lights.
Play of levels with pop and wooden battens .
Play of levels with pop and wooden battens .
19 mm board of Amul Teak wood is used in ceiling as a wooden battens which is at cost of Rs. 44/sq.ft. finished with veneer.
LOCATION :Edward Line,Kingsway Camp, (Near civil lines area) delhi-110009
SITE IMAGES
• Gypsum board false ceiling:
India Gypsum pvt. Limited
Regd. Office INDIA GYPSUM LIMITED: 815,Tolstoy House (8th Floor),Tolstoy Marg, New Delhi-I 10001 Tel.: 3712167/8/9 Fax: 3355632
Works INDIA GYPSUM LIMITED: P.O. Box No.22,julianiViliage, Near jind Rly.Junction, jind (Haryana)-1261 02 Tel.: 55267, 55549
Fax: 55549
Delhi OfficeINDIA GYPSUM LIMITED137, Sant Nagar, New Delhi-11 0065 Tel.: 6236289, 6236290, 6413272, 6427929 Fax: 6427929
Mumbai OfficeINDIA GYPSUM LIMITED9th Floor, 96 Bajaj Bhawan, Nariman Point, Mumbai-400021 Tel.: 2021125, 20210~5 Fax: 2841107
Calcutta OfficeINDIA GYPSUM LIMITED72, Til Jala Road, Near Don Basco, Technical institute, Calcutta-700046 Tel.: 2800363, 2809533
Chandigarh OfficeINDIA GYPSUM LIMITEDSCO 13, Sector - 26, Madhya Marg, Chandigarh. Tel.: 2790303, 2791207
Various Companies
Aluminum & Metal false ceiling:
LUXALONA Hunter Douglas product
Hunter DouglasBMS, 10, plaza cinema buildingConnaught Circus, New Delhi-11 0001 Tel.: 3320264, 3350040 Fax: 3310093
Vista LEVOLORALPS TEXTILES PVT. LTD.B-4, D/3, Shopping cum facility centre, D.D.A.Alaknanda,New Delhi – 110019. Tel. – 26446658, 26476640, 26417519. Fax: 91-11-26428609
E-Board false ceiling:
Eternit Everest ltd.An ACC group company
Everest House, E-62, Greater Kailash-I,
New Delhi – 110048,
Tel. – 011-26432568, 26432569
Fax : 011 - 26464006
Armstrong false ceiling:
INARCO LIMITED15-A/24, East Patel Nagar,
New Delhi – 110008,
Tel. – 011-25772724, 25772725
Fax : 011 - 25772724
Various Companies
34-Corner Market, Malviya Nagar, Delhi - 110017 | Call: +(91)-11-66434196
Eon Interior Product Pvt Ltd
ARK International Plot No-428, Opp Star Gym,M G Rd, White House, Gurgaon - 110030
Modern Plaster Corp4/4, NR Bank Of India, D B Gupta RD, Pahar Ganj, Delhi - 110055
ARMSTRONG TILE FALSE CEILING
Aar Cee Sons
312-313,P P Tower, Netaji Subhash Place, pitampura, Delhi - 110088