FACULTY EDITORS

Mr Ch Samsonu, Associate Professor

Prof. B.Satyanarayana Reddy, Professor

Dr.B.Tarakeswara Rao, Professor

STUDENT EDITORS

Bejjam Karuna (158X1A0510)

Panyam Bhargavi(168X5A0502)

G.Sairam (158X1A0531)

INSIDE

1 VISION AND MISSION

2 Messages from Chairman

3 Message from Director

4 Message from Principal and HOD

5 Department Profile

6 3-D printing new way of creation

10 Happenings

11 FDP and Guest Lectures

12 Achievements

17 Placements

1

Computer Science and Engineering Department

VISION

Imparting quality technical education to learners in the field of Computer Science and

Engineering to produce technically competent software personnel with advanced skills,

knowledge and behaviour to meet the computational global real time challenges.

MISSION

M1: To impart the quality technical education through training in fundamentals of software and

hardware in the field of computer science and engineering with global standards.

M2: To educate the students to become software professionals and lifelong learners through

professional training and practice.

M3: To develop professional ethics in students to lead the life with good human values.

M4: To be a state of the art research centre in the field of computer science & engineering

promoting innovation and research.

PROGRAM EDUCATIONAL OBJECTIVES:

The Program Educational Objectives (PEOs) of Computer Science and Engineering are as

follows:

PEO-1: Graduates shall effectively apply their engineering knowledge to analyze, design and

develop software for contemporary problems.

PEO-2: Graduates utilize the knowledge of theoretical computer science to adept emerging

technologies and tools for changing needs of industry.

PEO-3: Graduates shall exhibit social, ethical responsibilities and effective communication

skills.

PEO-4: Graduates shall be able to get employed in software industry, pursue higher studies or

become entrepreneurs.

PEO-5: Graduates shall be able to develop focus on research in the field of computer science &

engineering to meet the industry needs.

PROGRAM SPECIFIC OUTCOMES (PSOs)

PSO 1: The graduates will be able to use programming methodologies to solve problems by

suitable softwares.

PSO 2: The graduates will be able to interpret the fundamental concepts, functionality of

hardware and software aspects of computer systems.

PSO 3: The graduates will be able to implement software engineering practices and

methodologies for the analysis, design, development, operation & maintenance.

2

Message from the desk of Chairman

Sri Kallam Haranadha Reddy, Chairman, KHIT

The pride of every student and staff would be in his/her college. A college may reach heights of

glory but without materials like the college magazine, the outside world may not know of it.

The role of a college magazine is there-fore vital in promoting what an institution offers. It

brings out into the open things hitherto unrevealed. It brings to light the names of the unsung

heroes and their mighty deeds.

I am happy that there is a dedicated team of staff and students who have brought out the first

ever magazine of our college. They have presented the stupendous achievements of KHITians in

the fields of academics, research, sports and extra-curricular activities, in a wonderful way.

I wish the magazine a grand success.

BEST WISHES!!!

3

Message from the desk of Director

Dr.M UmaSankara Reddy,Director, KHIT

It gives unbounded happiness to see Kallam Haranadhareddy Institute of technology

breaking barriers and moving forward confidently.

There is nothing… absolutely nothing that stops the KHIT juggernaut from rolling

forward, going on boldly from one project to another… leaving the spectators spellbound.

Everything that KHIT touches turns into gold. All these things have been made possible

by the extraordinary vision and the immaculate planning of our chairman, which when coupled

with the skills of the staff have made the college scale new highs. This magazine brings out the

notable achievements of KHIT. I am sure that through these pages readers will get a bird’s eye

view of KHIT and its wonders.

4

Message from the desk of Principal

Dr B.S.B Reddy, Principal, KHIT

PRAGNA,CSE Departmental Magazine is encourages the students to share the knowledge they

have acquired . Writing articles for the magazine also improves the communication skills.

PRAGNA aims to inspire and nurture upcoming engineers to bring a revolution in this ever

evolving world of technology. The magazine captures the current technological advancements.

To conclude I would like to congratulate the faculty and the students of the editorial team on

bringing out the second issue of PRAGNA .

I wish the management, staff and students of the college success in their future

endeavours.

Message from HOD .. Congratulations to the students and faculty associated to magazine committee

for successfully publishing the third issue of departmental magazine

PRAGNA. PRAGNA is creating platform which provides an opportunity to

the students and staff to express their original thoughts on technicaltopics.

This issue has expanded its scope by introducing articles by major

stakeholders. Apart from students and faculty, inputs have been collected from alumni, parents

and industry experts. On concluding note, I would like to thank all the stakeholders for their

involvement and encouragement and wish all the best for their bright future.

Dr.K.V.SubbaReddy,

HOD,CSE Department

5

Departmental profile:

Computer Science and Engineering Department of KHIT provides a quality learning environment, in terms of

inspiring teachers, state-of-the-art facilities, experience sharing and widening the knowledge horizon, interacting

with experts from academia and industry, facilitating the student in the process of growth in the computer field.

Learning is a continuous process and does not end with the acquisition of a degree, especially because steady and

rapid advances in Computing Technologies shorten the life of tools and techniques prevalent today.

CSE department has 29 teaching and 10 nonteaching Faculty included 3 doctorates. Our department has 10

Computer Labs.

Teaching Staff

S. No. Faculty Name Qualification Designation

1 Dr.K.Venkata Subba Reddy Ph.D&HOD Professor

2 Dr. B. Tarakeswara Rao Ph.D Professor

3 Dr.Md.Umar Khan Ph.D Professor

4 Prof. B.Satyanarayan Reddy M.Tech(Ph.D)Professor

5 Mr.Samsonu Chukka M.Tech. Associate Professor

6 Mr. V Rajeev Jetson M.Tech.(Ph.D) Associate Professor

7 Mr.B.Srikanth M.Tech.(Ph.D) Associate Professor

8 Mr.N.Md.Jubair Basha M.Tech.(Ph.D) Associate Professor

9 Mr.Paleti Lakshmikanth M.Tech.(Ph.D) Associate Professor

10 Mr.Sandeep Kumar Arudra M.Tech. Associate Professor

11 Mr. Lakshmi Narayana Gumma M.Tech. Assistant Professor

12 Mr. Ramakrishna Badiguntla M.Tech. Assistant Professor

13 Mrs.Naga Lakshmi Panchakatla M.Tech. Assistant Professor

14 Mrs.Santhi Kolli M.Tech. Assistant Professor

15 Mr.Anil Babu Kuricheti M.Tech. Assistant Professor

16 Mrs Nirmala Maduru M.Tech. Assistant Professor

17 Ms.S.S LakshmiParvathi M.Tech.Assistant Professor

18 Mr.S.Krishna Reddy M.Tech. Assistant Professor

19 Mrs Lavanya Poluri M.Tech. Assistant Professor

20 Mr.K.Kranthi Kumar M.Tech. Assistant Professor

21 Mr.S.Srinivasa Rao M.Tech. Assistant Professor

22 Mr.K.Srinivasa Reddy M.Tech. Assistant Professor

23 Ms.K.Naga Mallika M.Tech. Assistant Professor

24 Mr.G.Mahesh Reddy M.Tech. Assistant Professor

25 Ms.P.Uma Rani M.Tech. Assistant Professor

26 Dr.D.JaganmohanReddy,Ph.D. Professor

27 Mr.S.V.Reddy P M.Tech. Assistant Professor

28 Mrs.A.Sunitha M.Tech. Assistant Professor

29 Mr.Prasad Rao. M M.Tech. Assistant Professor

30 Dr.Ch Rajendrababu , Ph.D Professor

6

3-D Printing-New way of Creation

What is 3D Printing?

3D printing or additive manufacturing (AM) is the use of one of various processes to make a three-

dimensional object. In 3D printing, primarily additive processes are used, in which successive layers of

material are laid down under computer control. These objects can be of almost any shape or geometry, and

are produced from a 3D model or other electronic data source. A 3D printer is a type of industrial robot.

You've heard of 3D printing from newscasters and journalists, astonished at what they've witnessed. 3D

Printer is a machine, which can “print” using plastic, metal, nylon, and over a hundred other materials. It can

be used for making nonsensical little models like the over- printed Yoda, yet it can also print manufacturing

prototypes, end user products, legal guns, aircraG engine parts, innovative jewelry design and even human

organs using a person's own cells.

How 3D Printing Works?

It all starts with making a virtual design of the object you want to create. This virtual design is made in a CAD

(Computer Aided Design) file using a 3D modeling program (for the creation of a totally new object) or with

the use of a 3D scanner (to copy an existing object). This scanner makes a 3D digital copyof an object and puts

it into a 3D modeling program.

To prepare the digital file created in a 3D modeling program for printing, the soGware slices the final model into

hundreds or thousands of horizontal layers. When this prepared file is uploaded in the 3D printer, the printer

creates the object layer by layer. The 3D printer reads every slice (or 2D image) and proceeds to create the

object blending each layer together with no sign of the layering visible, resulting in one three dimensional

object.

Methods and Technologies of 3D Printing: Some methods use melting or soGening material to produce the

layers. Selective laser sintering (SLS) and Fused Filament Fabrication (FFF) are the most common technologies

using this way of printing. Another method of printing is to lay liquid materials that are cured with different

technologies.

7

3-D Printing Advantages:

Shorter response times

Three-dimensional printing allows businesses to construct working models in just hours instead of days or

weeks.

Lower Cost

Generating prototypes with 3D printers is much easier and cheaper than making molds.

Superior Surface Finish

Certain three-dimensional printing methods enable the production of objects with excellent surface features. This

makes it very easy to create construction models or prototypes for a wide variety of projects within many

industries.

Durability

The objects obtained in many types of 3-D printing are quite long lasting and durable, as they do not absorb

moisture or warp over time.

Functional Models

This special printing method allows you to display 3-D models to customers that are fully functional and look

very much like the real thing. This enables you to demonstrate how a product operates in a straighVorward

fashion, as opposed to a model that can be viewed only with computer assistance.

3D Printer Use for Various Applications such as:

Prototype model making

Education

Automation industries Ÿ Design and Engineering Ÿ Research

Architecture model making

Toy manufacturer etc.

Importance of 3D printer in Industries

Quality and speed are critical to your product's success.

As the pace of product development increases, industrial designers are pushing the envelope to bridge the gap

from concept to production in the fastest time possible.

3D printing processes allow for mass customization the ability to personalize products according to individual

needs and requirements. Even within the same build chamber, the nature of 3D printing means that numerous

products can be manufactured at the same time according to the end-users requirements at no additional process

cost.

Among automation and architecture 3D printing has become more and more popular over the last few years.

Although a 3D printer is not to be expected in every Automation/architecture office yet, that will change soon

8

given the enormous rate of adoption in this field. They use desktop 3D printing to research shapes in practice and

to make scale models to convince prototype.

3D Printer for Education

3D printing is a technology that allows users to turn any

digital file into a three dimensional physical product. VISHVA 3D printer can be performed in the regular

classroom well, i.e., during the lecture, do not make much noise while composing an object. It is also clean,

durable and don't require intensive maintenance.

3- Dimensional printing is a revolutionary and innovative technology that can truly introduce new methods of

learning and understanding concepts that traditional means can't. As the costs of the devices continue to come

down and their applications increase, there is no doubt that this is an emerging technology that will become

more common place, and more valuable, in education.

Why 3D Printer for Education?

It provides teachers with 3 dimensional visual aids that they can use in their classroom particularly in

illustrating a hard to grasp concept.

3D printer makes it easy for teachers to seize the interest of their students compared to just showing the

pictorial representations of objects.

It enhances hands-on learning and learning by doing. Using this prototyping technology, students will be able

to produce realistic 3 dimensional mini-models (Great for engineering, architecture, and multi- media arts

students).

The Future of 3D Printing

This is a disruptive technology of mammoth proportions, with effects on energy use, waste, customization,

product availability, art, medicine, construction, the sciences, and of course manufacturing. It will change the

world as we know it.

It is predicted by some additive manufacturing advocates that this technological development will change the

nature of commerce, because end users will be able to do much of their own manufacturing rather than engaging

in trade to buy products from other people and corporations.

Article on Roles in Outcome Based Education:

This article explores about the roles and responsibilities in OBE. To implement and exe- cute the outcome based

education process, different roles were considered. Figure 1 represents the roles in OBE. Head of the Department

is the chairman and key role player in order to execute all the activities of OBE. Program Coordinator will

monitor and review the activities of the program for all the four years through Module Coordinators.

Many modules were considered as per the requirement for the program. Module Coordina- tors were ratified by

Internal Quality Assurance Cell. Module Coordinators are responsible for the delivery of the teaching in

9

individual modules and the accompanying administration. Module Co- ordinators conducts meetings with Course

Coordinators for execution of activities under their module.

The course coordinator is respon-

sible for planning, delivering and as-

sessing the outcomes of the courses

offered by him/her during the semes-

ter/year. Course coordinators are ac-

countable to the Head of the Depart-

ment for all academic and administra-

tive activities associated with the

course. He/she has to work in coordi-

nation with the course advisor and

module coordinator for the day to day

activities and with the Program Coor-

dinator and the HOD for the overall

course administration. The course

coordinator is expected to maintain

academic quality in knowl- edge,

pedagogy and alignment of the

learning activities with course

outcomes and assessment.

Course advisor is designated wherever the same course is offered by different course

coordinators to different sections/classes. There are 10 modules for the Computer Science &

Engineering pro- gram. Each module consists of respective Module Coordinators. Program

Coordinator will interact with Module Coordinators. In turn, Module Coordinators will interact

with Course Advisors and Course Coordinators for the conduct of activities in the outcome

based education process. Rigor- ous meetings will be held in coordination with Program

Coordinator, Module Coordinators, Course Advisors and Course Coordinators for strengthening

the curriculum. With the Outcome Based Education, both teacher and students are benefitted.

N Md Jubair Basha, Program Co-ordinator, CSE

10

HAPPENINGS : Association for Computing Machinery (ACM) Student Chapter

KHIT Association for Computing Machinery (ACM) chapter was established in August, 2017. To- tally 21

student members were enrolled as international student members. Among these, 3 faculty members have taken

membership and have become professional members .

1 A Giridhar, Chair

2 N Aamani, Vice-Chair

3 M Siva Sai Reddy,Secretary

4 Ch Bavin Sai Teja,,Associate Secretary

5 P Kalyan Ram,Treasurer

6 E Harika,Web Admin

7 Ch Anusha,Web Admin

8 B Anudeep Raju,Membership Head

9 P Revanth Siva Sri Sai,Logistics Head

10 Aruna Sudha,Publicity Head

11 Ch Akhil,ACM Care Head

12 Ch Vineela,Magazine Head

13 T Mounika,News Letter Head

14 G Sowjanya,Magazine Team

15 M Sravani,Publicity Team

16 S.A. Razak Membership Team

17 A.Venkatesh Reddy ACM Care Team

18 G. Koushik Varma ACM Care Team

19 A.Ram Gopal Reddy ACM Care Team

20 J. Yaswanth Reddy Logistics Team

21 V.Jeevan Sandeep Logistics Team

22 N Md Jubair Basha Faculty Sponsorer

List of ACM Professional Members:

1. Mr. N Md Jubair Basha,Senior Professional, 6506164

11

2. Dr Umar Khan,Professional Member, 5759711

Mr. K. Kranthi Kumar,Professional Member, 1647507

Computer Society of India (CSI) Student Chapter:

KHIT Computer Society of India student chapter was estab- lished

in November, 2017

CSI-Student Branch Advisory Committee:

1.Dr B.Tarakeswara Rao,Professor

2.Dr Md.Umar Khan,Professor

3.Mr.B Satyanaraya Reddy,Assoc. Professor

CSI-Student Representativesfor the Academic Year (2017-18):

1.President:P.Naveen Reddy, IV year

2.Vice-President:U.Sowjanya, III year

3.Treasurer:K.Haritha Lakshmi, II year

FDP / Guest Lectures / Workshops Organized

1. The Department of CSE organized a Two Day National Workshop on “Python Programming and The

Applications of Python in Artificial Intelligence” from 27-06-2018 to 28-06-2018, Eminent Speaker: Vihar

Kurama,Co-Founder CaravelLabs, PSF, Contributing Member. Coordinator: Mr. B. Rama Krishna

Participants: II, III, IV B.Tech CSE students

12

2. A two day faculty development program on “SALES FORCE TRAIL HEAD” organized by department of

CSE, KHIT in association with ICT ACADEMY during 22nd – 23rd Deceme- ber, 2017.

Around 40 participants across various Engineering colleges in Guntur Distrcit are attended to this 2 days FDP

Faculty Achievements

1. Mr. S. Krishna Reddy has successfully completed and secured grade A+ in CS213.2X:

Implementation of Data Structures, an online course conducted from 13th March 2018 to 18th

December 2018.This course is offered by IIT BombayX.

2. Mr. Lakshmikanth Paleti has successfully completed and secured grade A+ in CS213.2X:

Implementation of Data Structures, an online course conducted from 13th March 2018 to 18th

December 2018.This course is offered by IIT BombayX.

Faculty Publications 1. B. Srikanth, Dr. E. Sreenivasa Reddy “Comparative study of Algorithmic Approaches to Segment

Multiple Brain Tumors” International Journal of Advanced Research in Computer Science, ISSN:

0976-5697, PP 592-598, Volume 9 Issue 1 January 2018

2. S Krishna Reddy, P Lakshmi Kanth, B Rama Krishna “Some Studies on Big Data Analytics with

Machine Learning” International Journal for Modern Trends in Science and Technology (IJMTST)

Vol. 04, Special Issue 01, January 2018, pp. 105-110 in 3rd International Conference on “Recent

Advances of computer science & engineering 2018” held on 27th & 28th Jan-2018, organized by

CIET, Lam, Guntur. DOI: http://www.ijmtst.com/ncracse2018.html

Dr. Tarakeswara Rao Balaga, Subba Rao Peram, Lakshmikanth Paleti, “Hadoop Techniques for concise

13

Investigation of Big Data in Multi-format Data Sets”, IEEE 2nd International Conference on

Communication and Electronics Systems, 22 March 2018, IEEE Explorer DOI:

10.1109/CESYS.2017.8321329

3. Y. Naga Sai Kumari, Dr. B. Tarakeswara Rao, “Some Studies on Clustering large datasets with K-

means customized inter and intra clustering (KMIIC) in Hadoop”, International Journal for Modern

Trends in Science and Technology, Volume 3, Special Issue 5, January 2018, pages 111-115.

4. N.Lavaya, Dr Md. Umar Khan “A Novel Approach for Optimal Travel Route Search using Spatial

Keyword Recommendation” Journal of Emerging Technologies and Innovative Research, ISSN-

2349-5162, Volume 5, Issue 6, Page No 498 to 503,June 2018, UGC Approved Journal No:63975

5. Dr.K.Venkata Subba Reddy, Analyzing Sentiments at a Time: A Mutual Topic Scheme

Approach, Journal of Emerging Technologies and Innovative Research, ISSN: 2349 5162, Volume

5, Issue 6,Page No 435-440, June 2018. UGC Approved Journal No: 63975, DOI: http://doi.one/10.1729/IJCRT.17789

6. N Md Jubair Basha "A Cross Leaseholder Admittance Control(CTAC) Model for Cloud

Computing: Reserved Specification and Verification" published in International Journal of

Scienti_c Research in Computer Science Applications and Management Studies (IJSRCSAM)

Vol.7 Issue 3, ISSN:2319-1953.June 2018.(UGC Listed Journal No:63611 and DBLP Indexed)

7. T.Durga Sai Sree, B.Satyanarayana Reddy “A New Scheme For Sanitizing Large Scale Datasets”

Journal of Emerging Technologies and Innovative Research, ISSN-2349-5162, Volume 5, Issue 6,

Page No 121 to 124,June 2018, UGC Approved Journal No:63975

8. Dr. K. Venkata Subba Reddy presented a paper Towards a Cloud Computing Continuum in

International Journal of Emerging Trends & Technology in Computer Science UGC Approved

Journal No: 48939 in the month & year September - October 2017

9. Dr. B. Tarakeswara Rao presented a paper Graph based ranking model for image retrieval in

International Journal of Innovative Engineering and Management Research in the month & year

September 2017

10. Dr. B. Tarakeswara Rao presented a paper A Review On DSR Protocol Hierarchy For Identifying

Black Hole Attacks in International Journal of Innovative Engineering and Management Research

in the month & year Sep-

FDP / Workshops Attended by Faculty 1. Mr. Mahesh Reddy Gogula has participated in the Faculty Development Programme on “Cloud

Computing with AWS” organized by E&ICT Academy, IIT Guwahati held from 07-13 August,

2017 at KKR & KSR Institute of Technology & Sciences, Guntur, Andhra Pradesh

2. Mr. Srikanth. B has participated in 2 Day Faculty Development Programming conducted by ICT

Academy on 16 Aug 2017 & 17 Aug 2017 held at RVR & JC College of Engineering, Guntur

3. Mr. Lakshmikanth Paleti successfully completed an AICTE approved Faculty Development

Programme on Foun- dation Program in ICT for Education conducted by Indian Institute of

14

Technology Bombay from August 3, 2017 to September 7, 2017.

4. Mr. Ramakrishna Badiguntla successfully completed an AICTE approved Faculty Development

Programme on Foundation Program in ICT for Education conducted by Indian Institute of

Technology Bombay from August 3, 2017 to September 7, 2017

5. Dr. K. V. Subba Reddy has participated in the Faculty Development Program on Innovations in

Renewable En- ergy Harvesting and Environment Friendly Process Technologies for Sustainable

Development conducted by RVR&JC College of Engineering, Guntur from 23-10-2017 to 04-11-

2017

6. Dr. B.Tarakeswara Rao has participated in the Faculty Development Program on Innovations in

Renewable En- ergy Harvesting and Environment Friendly Process Technologies for Sustainable

Development conducted by RVR&JC College of Engineering, Guntur from 23-10-2017 to 04-11-

2017

7. Mr. S. Krishna Reddy has successfully completed on Research Trends in Computer Engineering

conducted by Nadimpalli Satyanarayana Raju Institute of Technology from November 17, 2017 to

November 18, 2017

8. Mr. Rama Krishna Badiguntla has successfully completed on Research Trends in Computer

Engineering con- ducted by Nadimpalli Satyanarayana Raju Institute of Technology from

November 17, 2017 to November 18, 2017

9. Mrs NagaLakshmi Panchakatla has successfully completed on Research Trends in Computer

Engineering con- ducted by Nadimpalli Satyanarayana Raju Institute of Technology from

November 17, 2017 to November 18, 2017

10. Miss P.Umarani has successfully completed on Research Trends in Computer Engineering

conducted by Nadim- palli Satyanarayana Raju Institute of Technology from November 17, 2017

to November 18, 2017

11. Miss Sri Lakshmi Parvathi has successfully completed on Research Trends in Computer

Engineering conducted by Nadimpalli Satyanarayana Raju Institute of Technology from November

17, 2017 to November 18, 2017

12. Mr. Lakshmi kanth Paleti has successfully completed on Research Trends in Computer

Engineering conducted by Nadimpalli Satyanarayana Raju Institute of Technology from November

17, 2017 to November 18, 2017

13. Dr. B. Tarakeswara Rao has participated in the Short Term Training program on Intelligent

Computing and Deep Learning organized by PVP Siddhartha Institute of Technology in

association with Computer Society, PVPSIT from November 20, 2017 to November 25, 2017

14. Dr. K.V. Subba Reddy has participated in the Short Term Training program on Intelligent

Computing and Deep Learning organized by PVP Siddhartha Institute of Technology in

association with Computer Society, PVPSIT from November 20, 2017 to November 25, 2017

15

15. Mr. Srikanth Busa has participated in A Five Day National Level Faculty Development

Programme on Internet of Things & Advanced Analytics organized by JNTU College of

Engineering Kakinada from December 1 2017 to December 5 2017.

16. Dr. Md. Umar Khan, Professor has participated in the One Week FDP on “Machine Learning using

Python Programming” jointly organized by E&ICT Academy IIT Guwahati & NIT Warangal held

from 25 – 30 June 2018 in association with KKR & KSR Institute of Technology & Sciences,

Guntur and with support from Finland Labs.

17. Dr.K.Venkata Subba Reddy, has participated in the One Week AICTE-ISTE Sponsored Refresher

Program on “ Recent Advances and applications in Cognitive Computing”, Organized by

department of CSE&IT of Institute of Aeronautical Engineering(IARE), Hyderabad from 28th May

2018 to 2nd June 2018.

Students Achievements

1. Ms G.Prasanna Priyanka has participated in Converge conf Organised by Caravel Tech

with Python Software Foundation & Free Software Foundataion in Dec 2017

2. Ms. T.NagaSai Lakshmi has participated in Converge conf Organised by Caravel Tech with

Python Software Foundation & Free Software Foundataion in Dec 2017

3. Ms. R.Sireesha has participated in Converge conf Organised by Caravel Tech with Python

Software Foundation & Free Software Foundataion in Dec 2017

4. Ms. B.Rajeswari has participated in Converge conf Organised by Caravel Tech with Python

Software Foundation & Free Software Foundataion in Dec 2017

5. Ms. U.Vijaya Lakshmi has participated in Converge conf Organised by Caravel Tech with

Python Software Foundation & Free Software Foundataion in Dec 2017

6. Mr. M.Siva Sai Reddy has participated in Converge conf Organised by Caravel Tech with

Python Software Foundation & Free Software Foundataion in Dec 2017

7. Mr. M.Ashok Reddy has participated in Converge conf Organised by Caravel Tech with

Python Software Foundation & Free Software Foundataion in Dec 2017

8. Ms. M.Sravani has participated in Converge conf Organised by Caravel Tech with Python

Software Foundation & Free Software Foundataion in Dec 2017

9. Ms Perla Sangeetha has participated in Paper & Technical Quiz organized by GVR&S in

Sep 2017

10. Mr.Kummari Sai Charan has participated in an event Potential Professor by VVIT in DEC 2017

16

10. Ms. B.Rajeswari has participated in an Workshop on UI Development orgainsed by CIT in

July 2017

11. Ms. M.Sravani has participated in an Workshop on UI Development orgainsed by CIT in July

2017

12. Ms. B.Saraswathi has participated in an Workshop on UI Development orgainsed by CIT in

July 2017

13. Ms. M.Vigna has participated in an Workshop on UI Development orgainsed by CIT in July

2017

14. Mr. D.L.N.V.Sai Sri has participated in an Workshop on UI Development orgainsed by CIT

in July 2017

15. Mr. K. Bhanu Prakash Reddy has participated in Artificial Intelligence workshop at

University College of Engineering, Jawaharlal Nehru Technological University,

Kakinada from 17-02-2018 to 18-02-2018 organized by Robocart.com in

association with innovation cell-UMIC IIT Bombay.

16. Ms. Annapareddy Durga Bhavani has participated in Artificial Intelligence

workshop at University College of Engineering, Jawaharlal Nehru Technological

University, Kakinada from 17-02-2018 to 18-02-2018 organized by Robocart.com

in association with innovation cell-UMIC IIT Bombay.

17. Ms. Harika Guthikonda has participated in Artificial Intelligence workshop at

University College of Engineering, Jawaharlal Nehru Technological University,

Kakinada from 17-02-2018 to 18- 02-2018 organized by Robocart.com in

association with innovation cell-UMIC IIT Bombay.

18. Mr. Gayam Sai Ramesh Reddy has successfully completed and secured grade A+ in

CS213.2X: Implementation of data Structures, an online course conducted from

13th March 2018 to 18th December 2018.This course is offered by IIT BombayX.

19. Mr. Prasadam Yadagiri Ashok has successfully completed and secured grade A+ in

CS213.2X: Implementation of data Structures, an online course conducted from

13th March 2018 to 18th December 2018.This course is offered by IIT BombayX.

17

Student Results-Toppers

1. IV B.Tech II Semester Toppers in University End Examinations April/May-2018.

Placement Details

The following lists of companies are selected our students in various positions during on-campus

/off-campus placement drives from January-2018 to June-2018.

S. No Company Name Date No. of

Students Placed

1 ALLSEC Technologies, Chennai 11-01-2018 25

2 Hitachi Payment Services, Chennai 23-01-2018 08

18

3 TALENTIO Solutions, Hyderabad 25-01-2018 03

4 TESCRA Software, Bangalore 27-01-2018 09

5 ABC For Technology, Bangalore 28 & 29-06-2018 07

Thefollowing lists of students are selected in various companies during on-campus / off-campus

from January-2018 to June-2018.

19