f7 wc9 zu3701lsg_ai

V7.0

cover

Front cover

Introduction to HTML5 and JavaScript Programming (Course code ZU370)

Lab Setup Guide for Classroom Delivery ERC 1.0

Lab Setup Guide for Classroom Delivery

Trademarks

IBM® and the IBM logo are registered trademarks of International Business Machines Corporation.

The following are trademarks of International Business Machines Corporation, registered in many jurisdictions worldwide:

Windows is a trademark of Microsoft Corporation in the United States, other countries, or both.

Linux is a trademark of Linus Torvalds in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

DB2® HACMP™ System i™System p™ System x™ System z™

May 2012 edition

The information contained in this document has not been submitted to any formal IBM test and is distributed on an “as is” basis without any warranty either express or implied. The use of this information or the implementation of any of these techniques is a customer responsibility and depends on the customer’s ability to evaluate and integrate them into the customer’s operational environment. While each item may have been reviewed by IBM for accuracy in a specific situation, there is no guarantee that the same or similar results will result elsewhere. Customers attempting to adapt these techniques to their own environments do so at their own risk.

© Copyright International Business Machines Corporation 2012.This document may not be reproduced in whole or in part without the prior written permission of IBM.Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Lab Setup Guide for Classroom Delivery V7.0

TOC
Contents
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Lab setup guide overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Lab preparation checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Requirements for classroom lab workstations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Number of lab workstations required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Hardware requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Software requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Network requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Creating the lab environment manually (non-VMware) . . . . . . . . . . . . . . . . . . . . . . . . . 7Hardware requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Software requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Network requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Setup instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Software setup instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Course materials may not be reproduced in whole or in part without the prior written permission of IBM.

© Copyright IBM Corp. 2012 Contents iii

Lab Setup Guide


iv HTML5 and JavaScript © Copyright IBM Corp. 2012


TMK
Trademarks
The reader should recognize that the following terms, which appear in the content of this training document, are official trademarks of IBM or other companies:

IBM® and the IBM logo are registered trademarks of International Business Machines Corporation.

The following are trademarks of International Business Machines Corporation, registered in many jurisdictions worldwide:

Windows is a trademark of Microsoft Corporation in the United States, other countries, or both.

Linux is a trademark of Linus Torvalds in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

DB2® HACMP™ System i™System p™ System x™ System z™


© Copyright IBM Corp. 2012 Trademarks v



vi HTML5 and JavaScript © Copyright IBM Corp. 2012


LSGp
Purpose
This Lab Setup Guide provides directions for installing, preparing, and verifying the lab hardware and software in preparation for conducting a class of course ZU370.

The Requirements sections of this document may also be used to determine the specific hardware and software needed to conduct a class.


© Copyright IBM Corp. 2012 Purpose vii



viii HTML5 and JavaScript © Copyright IBM Corp. 2012


LSG
Lab setup guide overview
The purpose of this lab setup guide is to assist the classroom preparer in setting up the ZU370 classroom lab environment. This guide is separated into two parts:

• "Requirements for classroom lab workstations" on page 5

• "Creating the lab environment manually (non-VMware)" on page 7

The classroom preparer needs to complete only one of the two parts to complete the classroom lab environment.

Important

The lab exercises are designed to run within VMware virtual machine images.

Contact your WebSphere Education representative immediately if your classroom set-up does not support VMware virtual machines.

The classroom must be ready to run lab exercises before the first day of class.


© Copyright IBM Corp. 2012 Lab setup guide overview 1



2 HTML5 and JavaScript © Copyright IBM Corp. 2012


LSG
Lab preparation checklist
Repeat the following setup steps on each lab workstation machine:

__ 1. Confirm that there are enough workstation machines for each student and the instructor.

__ 2. Verify that the workstation machines meet the course requirements.

__ a. Check processor, memory, and free disk space requirements.

__ b. Check operating system and other software requirements.

__ c. Check network connectivity requirements.

__ 3. Install either VMware Workstation 7.1.4 or VMware Player 3.1.4.

__ 4. Extract and copy the virtual machine image files.

__ 5. Start the virtual machine.

__ 6. Log in to the guest operating system in the virtual machine.


© Copyright IBM Corp. 2012 Lab preparation checklist 3


LSG
Requirements for classroom lab workstations
Number of lab workstations required

As the classroom provider, you are responsible for providing:

• One workstation for the instructor;

• For each student in the class, one workstation.

For example, a class with 12 students and one instructor requires 13 workstations.

Each workstation must meet the following hardware, software, and network requirements for the ZU370 course.

Hardware requirements

Ensure that each workstation meets or exceeds the following requirements.

Software requirements

Make sure that each workstation has a copy of the following software installed. The classroom provider is responsible for obtaining software licenses for any non-IBM software.

Install one of the following virtualization products to support the virtual machine image used in lab exercises.

Tier code

Processor type and speed

Minimum RAM memory

Minimum free hard disk space

Display resolution

65Intel Core 2 Duo P8400 (2.26 GHz, two cores) or faster

3.0 GB 40 GB 1024 x 768 pixels

Software product Version Licensing requirementMicrosoft Windows XP Professional

Service Pack 3Site must satisfy the user license agreement.

Software product Version Licensing requirement

VMware Player 3.1.4 or newerSite must satisfy the user license agreement.

VMware Workstation 7.1.4 or newerSite must satisfy the user license agreement.


© Copyright IBM Corp. 2012 Requirements for classroom lab workstations 5


Note

Install only one virtualization product, either VMware Player or VMware Workstation, on to each workstation.

You do not need to install both Player and Workstation.

Network requirements

Configure and test network connectivity settings for each lab workstation.

Provide local network connectivity between workstations? Not requiredProvide Internet access for each workstation? RequiredUse a DHCP server to assign network IP addresses? RequiredAssign fixed IP addresses for each workstation? Not required




LSG
Creating the lab environment manually (non-VMware)
The following section provides information about how to manually create the lab environment that is needed to conduct the lab exercises in this course.

Perform the manual lab setup under the following conditions only:

• You are not allowed to install VMware virtualization software.

• You tried to perform the lab setup using VMware virtualization software and you were unable to successfully install the software on the student or instructor workstation.

• Verification of the virtual machine image settings, including network connectivity, failed.

Important

Contact your WebSphere Education representative before attempting to perform these steps.

As the classroom provider, you are responsible for providing: Enter the number of workstations required per student. For example, one student workstation per student or one student workstation for every two students.

• One workstation for the instructor;

• For each student in the class, one workstation.

For example, a class with 12 students and one instructor requires 13 workstations.

Each workstation must meet the following hardware, software, and network requirements for the ZU370 course.

Hardware requirements

This section lists the recommended hardware requirements for a student workstation. In the table, enter the hardware requirements for a student workstation.

Tier code

Processor type and speed

Minimum memory

Minimum free hard disk space

Display resolution

65Intel Core 2 Duo P8400 (2.26 GHz, two cores) or faster

3.0 GB 40 GB 1024 x 768 pixels


© Copyright IBM Corp. 2012 Creating the lab environment manually (non-VMware) 7


Software requirements

This section lists the software needed to prepare the student lab environments. When preparing for a class, be sure to have the correct number of licensed copies of any non-IBM software. Update and add any software requirements. Delete any unused rows.

Network requirements

Configure and test network connectivity settings for each lab workstation.

Software product Version Licensing requirementMicrosoft Windows XP SP3 or Windows 7.0

For XP Service Pack 3 or greater

Site must provide sufficient licenses for private offerings.

Java RTE or SDK V6 or laterSite must satisfy the user license agreement.

IBM WebSphere Application Server Developer Tools

Site must satisfy the user license agreement.

Google Chrome and Opera Web browsers

Site must satisfy the user license agreement.

Provide local network connectivity between workstations? Not requiredProvide Internet access for each workstation? RequiredUse a DHCP server to assign network IP addresses? RequiredAssign fixed IP addresses for each workstation? Not required




LSG
Setup instructions
Software setup instructions

Perform the following steps to install and customize software that is required in addition to the operating system. List the steps to install and customize any software.

Note

If you are installing the software on Windows 7, then you should download the 64-bit versions of the Java Runtime and Eclipse. If you are installing on Windows XP, then you should download and install the 32-bit versions of the Java Runtime and Eclipse software products.

__ 1. Download and follow the instructions to install the Java 6 RTE or later from java.com.

__ 2. After installing the Java Runtime, add the location of the JRE library to your user PATH environment variable from the Control Panel on Windows.

__ 3. Check that your environment is recognizing the Java JRE by opening a command prompt and typing java -fullversion. This should return the name of the Java environment that you installed.

__ 4. The IBM DeveloperWorks web site has links to the installation instructions and where you can download the WebSphere Application Server Developer Tools at




https://www.ibm.com/developerworks/mydeveloperworks/blogs/wasdev/entry/download_wdt?lang=en.

Information

Links to this software can also be found at http://marketplace.eclipse.org/content/ibm-websphere-application-server-v85-liberty-profile-developer-tools.

__ 5. Download Eclipse Indigo for Java EE Developers V3.7.2 from http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/indigosr2.

__ 6. Extract the downloaded Eclipse compressed file to the developer workstation, for example, C:\eclipse.

__ 7. Create a shortcut to eclipse.exe on the desktop.




LSG
__ 8. Double-click the Eclipse shortcut to start Eclipse. If Eclipse recognizes the installed Java JRE, then Eclipse starts.
__ 9. Accept the default workspace, then click OK.

__ 10. Follow the instructions to drag the WebSphere Application Server Liberty Profile V8.5 to the Eclipse toolbar.




__ 11. Select all the features in the Confirm Selected Features dialog.

Note

The feature version numbers might differ slightly from the those seen in the figure.

__ 12. Click Next.

__ 13. Accept the license conditions.

__ 14. If you get a dialog that prompts you that you are installing unsigned content, click OK.

__ 15. After the software installation completes, you see a dialog asking you whether you want to restart Eclipse.

__ 16. Download and install the Opera browser.

__ a. Open a Firefox browser session and type the address: http://www.opera.com/browser/download/

__ b. Ensure that the browser download is for Windows.




LSG
__ 17. Download and install the Google Chrome browser.
__ a. From a Firefox browser session, type the address: https://www.google.com/chrome/?hl=en&brand=chmo

__ b. Ensure that the browser you are about to download is for Windows.

__ 18. Copy the compressed lab exercise files for the class to a directory on the workstation file system, for example, C:\labfiles.

__ a. Extract the lab files from zu370_labfiles.7z to the root directory.

__ b. If you do not have the 7-zip program, you can download it from www.7-zip.org.

STOP StopSTOP Stop

You have completed the manual installation and customization of the lab environment.



V7.0

backpg
Back page

f7 wc9 zu3701lsg_ai

Documents

requiredprovide internet access

prior written permission

lab setup guide

firefox browser session

lab environment manually

newer license agreement

tier processor type

classroom lab workstations