f01 - fujitsu fm3 twinmac ethernet mcus
DESCRIPTION
Fujitsu Semiconductor Europe Factsheet MB9BD10S/T, MB9B610S/T SeriesFM3 TwinMAC Ethernet MCUsThe MB9BD10S/T and MB9B610S/T series belong to Fujitsu’s FM3 ARM Cortex-M3 based Microcontroller Family. With an operation frequency of up to 144MHz and a very fast and reliable Flash memory, these devices mark the high end of Cortex-M3 based MCUs. Among many other peripherals, two Ethernet MAC channels are implemented. A single Ethernet MAC MCU series, with similar features, is available too: MB9B210TRANSCRIPT
Embe
dded
Driv
e
Feld
bus G
atew
ay
Daisy Chain
MB9BFD18T144MHz
MB9BFD18T144MHz
PHY PHY PHY PHY
PHY PHY
PHY
CAN1
CAN0PMS
M
The MB9BD10S/T and MB9B610S/T series belong to Fujitsu’s FM3 ARM Cortex-M3 based Microcontroller Family. With an operation frequency of up to 144MHz and a very fast and reliable Flash memory, these devices mark the high end of Cortex-M3 based MCUs.Among many other peripherals, two Ethernet MAC channels are implemented. A single Ethernet MAC MCU series, with similar features, is available too: MB9B210S/T
TwinMAC EthernetBoth, MB9BD10S/T and MB9B610S/T series offers 2 channels Ethernet MAC. This feature allows the design of gateway applications. Two network domains can be separated to improve security or to assure a certain bandwidth for sub networks by fi ltering irrelevant Ethernet frames. Another advantage of a dual channel Ethernet MAC is the possibility to create line- or ring- topologies (daisy chaining) without separate switches.
Ethernet - MAC Features ■ 2 channels Ethernet MAC ■ Single channel Ethernet MAC MCUs available too.
■ Compliant with IEEE802.3 specifi cation ■ 10Mbps / 100 Mbps data transfer rates supported
■ MII/RMII for external PHY device supported. ■ Full-Duplex and Half-Duplex mode supported.
■ Wake-ON-LAN supported ■ Built-in dedicated descriptor-system DMAC ■ Built-in 2Kbyte Transmit FIFO and 2Kbyte Receive FIFO.
■ Compliant to IEEE1588-2008(PTP)
Fujitsu Semiconductor Europe
Factsheet MB9BD10S/T, MB9B610S/T Series
FM3 TwinMAC Ethernet MCUs
Lineup of FM3 TwinMAC Ethernet MCUs
144pin 176pin
128K
B64
KBRA
M96
KB1M
B51
2KB
FLAS
H76
8KB
MB9BFD16S
MB9BFD17S
MB9BFD18S
MB9BFD16T
MB9BFD17T
MB9BFD18T
CAN
CAN
CAN
MB9BF616S
MB9BF617S
MB9BF618S
MB9BF616T
MB9BF617T
MB9BF618T
FM3 TwinMAC Ethernet MCUs
Embedded Systemwith Gateway Functionality
Gateway
MB9BFD18T144MHz
PHY PHY
Company network or Internet
Embedded System
Embedded System
Page 1 of 2
RC oscillator +/-2%
Clock Supervisor
Subclock (option)
Low Voltage Detector 2ch
OCU x 6ch
ADT x 3ch
Multi Function Timer 3ch
TBase imer 16ch
PPG 9ch
Dual Timer
Watch Counter
Resource Pin Relocation
12-bit ADC
12-bit ADC
QDU 3ch
DMA 8ch
CRC
Hardware Watchdog
ICU x 4ch
FRTim x 3ch
Waveform Generator
USB FS Host+Function 2ch
ARM Cortex-M3 – CPU144MHz (max)
2.7 - 5.5VMain CLK:
4MHzSUB CLK:
32kHzMAIN RC CLK:
4MHz
SUB RC CLK:
100kHzExternal IRQs16ch + NMI
MFS(UART/SPI/I
C) 8ch2 Package: LQFP144*1, LQFP176*2
MB9BFD16S/T
MB9BFD17S/T
Flash512K
SRAM64K
Flash786K
SRAM96K
Memory Protection Unit
SWJ/TPIU/ETM/ Debug Ports
12-bit ADC
MB9BF618S/T Flash1MB
SRAM128KEthernet MAC 10/100MBit 2ch
CAN (32 MSB) 2ch
External Bus Interface8/16 Data, 19*1/25*2 Addr, 8CS
*1MB9BD10S: LQFP144*2MB9BD10T: LQFP176
20ch*1
32ch*2
FSEU-FM3-28FEB2012
Factsheet Fujitsu MB9BD10S/T, MB9B610S/T Series
All company and product trade marks and registered trade marks used throughout this literature are acknowledged as the property of their respective owners.
[email protected]://emea.fujitsu.com/fm3
MCU Features
High Performance ■ High Speed Flash: True zero wait state Flash operation at 72MHz, prefetch buffer for zero wait state operation at 144MHz
■ Wide range of power supply voltages supported: 2.7 V to 5.5 V
High Quality Flash Memory ■ Highly reliable fl ash memory: 100,000 write/erase cycles, up to 20 years data retention
■ Flash security function
Functinal Safety ■ Internal, trimmed RC oscillator ■ Clock Supervisor ■ Two stage (interrupt and reset), programmable LVD (Low Voltage Detector)
■ CRC hardware module ■ MPU (Memory Protection Unit) ■ Programmable Emergency Stop Input for Motor Control PWM
Connectivity ■ Up to 2 channels CAN Controller ■ Full Speed USB Host & Function ■ fl exible resource pin relocation ■ Multifunction serial (UART, SIO, SPI, and I2C)
Advanced Peripherals ■ 3 independent high-speed 12-bit A/D converters, 32channels
■ 3 ch Multifunction timer (for motor control) ■ 3 Quadrature Decoder Units ■ 8/16bit external bus interface
Debug Interface ■ JTAG, SWJ- and Trace Debug Interface
Development Tools
The Fujitsu FM3 family is supported by market leading tool chain suppliers like IAR Systems,Keil, Code Sourcery and others. These com-panies offer enhanced IDEs (integrated development environments) A free of charge OpenSource GNU/Eclipse based tool chain is available too.
Diverse middleware components are offered from Fujitsu, as well as 3rd parties. In many cases the user can choose between commer-cial and free of charge solutions. The offering includes Realtime Operating Systems, Low Level Peripheral Libraries and Protocol Stacks.
Fujitsu Middleware Components ■ Peripheral Library ■ USB Library ■ Functional Safety Self Test Libraries (IEC60730 - class B, IEC61508 SIL2)
■ Motor Control Platform ■ Capacitive Touch Library ■ Ethernet Low Level Driver ■ Example implementations uIP, lwIP TCP/IP stacks
Partner Middleware Components ■ USB Library ■ Ethernet TCP/IP stacks and Application Layers ■ CANopen protocol stacks
Block diagram of the MB9BD10S/T series
Evaluation Boards
Hardware Evaluation Boards for the FM3 Ether-net MCUs are provided by Fujitsu and partners.
SK-FM3-176PMC-ETHERNET Features ■ Microcontroller MB9BFD18T ■ 2x Ethernet connectors ■ 2x USB-Host (Type-A connector) ■ 1x USB-Device (Type-B connector) ■ 1x High-speed CAN-Transceiver (SUB-D9 connector)
■ 1x UART-Transceiver (SUB-D9 connector) ■ 1x USB to serial converter (Type-B connector) ■ JTAG-and Trace Interface each on a 20 pin-header
■ 2x LED-Display (7-Segment) ■ All 176 pins routed to pin-header ■ On-board 5V and 3V voltage regulators, ‘Power’-LED
■ 3 x motor control connector
Starterkit SK-FM3-176PMC-ETHERNET
Page 2 of 2