EXOFLEX

• Engineered for performance fabrics

• Ultimate stretch and recovery

• Matte finish

• Patterns offer differentiating graphic/market relevant aesthetic

• Soft hand feel

• Abrasion resistant

• Withstands high heat wash

• Water resistant

Why It’s Worth a Look

EXOFLEX

/ CORE COLORS

Gold

Pantone 871C

Ash

Pantone 19-4104 TPX

Grey

Pantone 17-1501 TPX

Snow

Pantone 11-0601 TPX

Black

Pantone 19-0508 TPX

Navy

Pantone 19-4024 TPX

Red

Pantone 18-1763 TPX

Pitch

Pantone 19-4006 TPX

Electric

Pantone 285C

Orange

Pantone 17-1464 TPX

Metallic Gold

Pantone 871C

Metallic Silver

Pantone 877C

EXO / 1

TECHNICAL INFORMATION

1Only available in Black, Pitch, Grey and Snow.2Taber Test ASTM 38843Recommended bonding conditions will vary between different machinery and fabrics. The recommended conditions stated are a starting point only. Optimal bonding conditions should be established by the factory of the specific application.

NOTE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is made in lieu of any such “warranties.” Bemis Associates, Inc. believes the information and specification supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using, the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, or misuse or inability to use this product.

EXOFLEX EXO3900 EXO5231

MATERIAL Thermoplastic Polyurethane Thermoplastic Polyurethane

STOCKED WIDTH 475 mm 1422 mm

GAUGE 75 µm (.003”) 75 µm (.003”)

WEIGHT 90 g/m2 150 g/m2

CARRIER Release Paper Matte Release Paper

ADHESIVE SOFTENING POINT 102°C (216°F) 102°C (216°F)

ADHESIVE MELT FLOW INDEX 20 dg/min at 150°C / 2.16 kg 20 dg/min at 150°C / 2.16 kg

ABRASION RESISTANCE2 Excellent Excellent

SERVICE TEMPERATURE −40°C to 75°C (−40°F to 167°F) −40°C to 75°C (−40°F to 167°F)

WASH Excellent up to 60°C Excellent up to 60°C

HAND Soft Soft

INITIAL BONDING CONDITIONS3

FLAT PRESS

TEMPERATURE 130°C to 155°C 130°C to 155°C

TIME 15 to 30 seconds 15 to 30 seconds

PRESSURE 2.8 to 5.5 bar (40 to 80 psi) 2.8 to 5.5 bar (40 to 80 psi)

CONTINUOUS BONDING MACHINE

TEMPERATURE 200°C to 250°C 200°C to 250°C

SPEED 1.5 to 2.0 m/min 1.5 to 2.0 m/min

PRESSURE 1.0 bar (14.5 psi) 1.0 bar (14.5 psi)

EXOFLEX

/ CORE COLORS

Bright Blue Pearl EssenceBright Purple Pearl EssencePink Pearl EssenceRose Pearl Essence

Bright Gold Pearl EssenceBright Green Pearl Essence

Rusty Red Pearl Essence

Carbon Pearl EssenceNude Pearl Essence

Gold Pearl Essence

EXO / 2

EXOFLEX

/ CORE PATTERNS

Navy Flax (Navy/Navy)

Pantone 19-4024 TPX/19-4024 TPX

Gold Flax (Gold/Gold)

Pantone 871C/871C

Silver Flax (Silver/Black)

Pantone 877C/19-0508

Stainless Silver Flax (Silver/Silver)

Pantone 877C/877C

Gold Desco (Gold/Gold)

Pantone 871C/871C

Black Flax (Black/Black)

Pantone 19-0508 TPX/19-0508 TPX

Desco (Silver/Black)

Pantone 877C/19-0508 TPX

EXO / 3

EXOFLEX

/ CORE PATTERNS

Gold Lodi Dotti (Gold/Gold)

Pantone 871C/871C

Silver Lodi Dotti (Silver/Silver)

Pantone 877C/877C

Manila (Pitch/Pitch)

Pantone 19-4006 TPX/19-4006 TPX

Pitch Cobra (Pitch/Pitch)

Pantone 19-4006 TPX/19-4006 TPX

Pitch Lodi Dotti (Pitch/Pitch)

Pantone 19-4006 TPX/19-4006 TPX

Billie Jean (Denim/Navy)

Pantone 18-4320 TPX/19-4024 TPX

EXO / 4

TECHNICAL INFORMATION

1Taber Test ASTM 38842Recommended bonding conditions will vary between different machinery and fabrics. The recommended conditions stated are a starting point only. Optimal bonding conditions should be established by the factory of the specific application.

NOTE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. The following is made in lieu of any such “warranties.” Bemis Associates, Inc. believes the information and specification supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using, the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, or misuse or inability to use this product.

EXOFLEX EXO3900

MATERIAL Thermoplastic Polyurethane

STOCKED WIDTH 475 mm

GAUGE 75 µm (.003”)

WEIGHT 90 g/m2

CARRIER Release Paper

ADHESIVE SOFTENING POINT 102°C (216°F)

ADHESIVE MELT FLOW INDEX 20 dg/min at 150°C / 2.16 kg

ABRASION RESISTANCE1 Excellent

SERVICE TEMPERATURE −40°C to 75°C (−40°F to 167°F)

WASH Excellent up to 60°C

HAND Soft

INITIAL BONDING CONDITIONS2

FLAT PRESS

TEMPERATURE 130°C to 155°C

TIME 15 to 30 seconds

PRESSURE 2.8 to 5.5 bar (40 to 80 psi)

CONTINUOUS BONDING MACHINE

TEMPERATURE 200°C to 250°C

SPEED 1.5 to 2.0 m/min

PRESSURE 1.0 bar (14.5 psi)