evaluation board - rs components · figure 4 power supply concept xmc4500 relax/relax lite kit-v1...

Microcontrol ler

Evaluat ion Board For XMC4000 Family

Board User‘s Manual

Revision 1.2, 2014-01-13

XMC4500 Relax Ki t &

XMC4500 Relax Li te Ki t Kit Version 1

Edition 2014-01-13

Published by Infineon Technologies AG 81726 Munich, Germany

© 2014 Infineon Technologies AG All Rights Reserved.

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office.

Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1

Template: IFX_Template_2011-02-24.dot

Revision History

Page or Item Subjects (major changes since previous revision)

Revision 1.0,

2012-11-07

Initial release

Revison 1.1,

2012-11-09

Correction of DAVE™3 trademark

Revison 1.2,

2014-01-13

Notes have been added to Figure 5 (Pins of Pin Header X1 / X2 are partly used also for on-board circuits)

Trademarks of Infineon Technologies AG

AURIX™, C166™, CanPAK™, CIPOS™, CIPURSE™, EconoPACK™, CoolMOS™, CoolSET™, CORECONTROL™, CROSSAVE™, DAVE™, EasyPIM™, EconoBRIDGE™, EconoDUAL™, EconoPIM™, EiceDRIVER™, eupec™, FCOS™, HITFET™, HybridPACK™, I²RF™, ISOFACE™, IsoPACK™, MIPAQ™, ModSTACK™, my-d™, NovalithIC™, OptiMOS™, ORIGA™, PRIMARION™, PrimePACK™, PrimeSTACK™, PRO-SIL™, PROFET™, RASIC™, ReverSave™, SatRIC™, SIEGET™, SINDRION™, SIPMOS™, SmartLEWIS™, SOLID FLASH™, TEMPFET™, thinQ!™, TRENCHSTOP™, TriCore™.

Other Trademarks

Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™, PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum. COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™ of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium. HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™ of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc. MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc. MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc. Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of Sirius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd. Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc. TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex Limited.

Last Trademarks Update 2011-02-24

XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Table of Contents

Board Users Manual 4 Revision 1.2, 2014-01-13

Table of Contents

Introduction ............................................................................................................................................................ 7

1 Overview ............................................................................................................................................. 7 1.1 Key Features ........................................................................................................................................ 7 1.2 Block Diagram ...................................................................................................................................... 8

2 Hardware Description ........................................................................................................................ 9 2.1 Power Supply ..................................................................................................................................... 11 2.2 Pin Header Connector ........................................................................................................................ 12

3 Production Data................................................................................................................................ 14 3.1 Schematics ......................................................................................................................................... 14 3.2 Components Placement and Geometry ............................................................................................. 17 3.3 List of Material .................................................................................................................................... 18

XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 List of Figures


List of Figures

Figure 1 Block Diagram of the XMC4500 Relax/Relax Lite Kit-V1..................................................................... 8 Figure 2 XMC4500 Relax Lite Kit-V1 ................................................................................................................. 9 Figure 3 XMC4500 Relax Kit-V1 ...................................................................................................................... 10 Figure 4 Power Supply Concept ....................................................................................................................... 11 Figure 5 Signal mapping of the pin headers..................................................................................................... 12 Figure 6 Mapping of communication peripherals to GPIOs and it’s corresponding functions ......................... 13 Figure 7 CPU, Pin Headers, Buttons, LEDs, Reset ......................................................................................... 15 Figure 8 On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal ...... 16 Figure 9 Components Placement and Geometry ............................................................................................. 17

XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1

List of Tables


List of Tables

Table 1 Features ............................................................................................................................................... 7 Table 2 List of Material .................................................................................................................................... 18

XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Overview


Introduction

This document describes the features and hardware details of the XMC4500 Relax Kit-V1 and the XMC4500 Relax Lite Kit-V1, both equipped with the ARM® Cortex™-M4 based XMC4500 Microcontroller from Infineon Technologies AG.

1 Overview

The XMC4500 Relax Kit-V1 and the XMC4500 Relax Lite Kit-V1 are designed to evaluate the capabilities of the XMC4500 Microcontroller and the powerful, free of charge tool chain DAVE™. The XMC4500 Relax Kit extends the feature set with an Ethernet-enabled communication option, e.g. to run an embedded web server. You can store your own HTML web pages on a microSD Card or control the XMC4500 via the web browser on your PC. The XMC4500 Relax Lite Kit-V1 does not support the web server application, because the components for the Ethernet are not assembled. Both boards are marked with “XMC4500 Relax/Relax Lite Kit-V1”. These boards are neither cost nor size optimized and do not serve as a reference design.

1.1 Key Features

Table 1 summarizes the features of both the XMC4500 Relax Kit-V1 and the XMC4500 Relax Lite Kit-V1.

Table 1 Features

Feature XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1

XMC4500 Microcontroller

(ARM® Cortex™-M4F based)

Detachable on-board Debugger

Power over USB

2 x User Button and 2 x User LED

Reset Button

Power Regulator from 5 V to 3.3V

4 x SPI-Master, 3x I2C, 3 x I2S, 3 x UART, 2 x CAN, 17 x ADC (12 bit), 2 x DAC, 31x PMW mapped on 2 Pin Headers 2 x 20

USB-OTG (Micro USB Plug)

Ethernet PHY and RJ45 jack

Real Time Clock Crystal

32 Mbit Quad-SPI Flash Memory

microSD Card Slot

XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Overview


1.2 Block Diagram

The block diagram in Figure 1 shows the main components of the XMC4500 Relax/Relax Lite Kit-V1 and their interconnections. There are following main building blocks:

XMC4500 Microcontroller in a LQFP100 package

On-board USB debugger realized with a 2nd

XMC4500 for serial wire debug

Ethernet Phy with RJ45 Plug

Two 40 pin header X1 and X2

On-board power generation for power supply of the XMC45000 Microcontroller and the debug IC

2 User Buttons and 2 User LEDs

USB Plug

microSD Card Slot

Figure 1 Block Diagram of the XMC4500 Relax/Relax Lite Kit-V1

XMC4500

Microcontroller

U0C0

ETH

USBDebug,

U1C1

SDMMC OCS

EVRRTC

SD/MMC

12 MHz

Crystal

32.768

kHz

Micro

USB

micro

SD

qSPI

Flash

BUTTON2

ETH

PHY25 MHz

CrystalRJ45

RMII ADC, DAC, CCU42, CCU80, POSIF0, U1C0,

U1C1, CAN0, ERU0, LEDTS

DSD, CCU4[0..2], CCU8[0..1], POSIF0, U0C0,

U1C0, U2C0, CAN[0..2], ERU[0..1]

SWVSWDUSB

GPIO,

ERU0,

ERU1

PORST

#RESET

LED1

BUTTON1Cortex

Debug

(10pin)

XMC4500

Debug IC

Micro

USB

Voltage

Regulator

+5V

+3.3V*

*

UARTBSL

Pin Header X1

2x20, 0.1"

Pin Header X2

2x20, 0.1"

Not assembled in

Relax Lite version

Not assembled in

both versions

XMC4500

Relax/Relax Lite

P1.1

LED2

P1.14

P1.0

P1.15

Power

LED

Debug

LED

* Simplified view on

power supply

BlockDiag.emf

XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Hardware Description


2 Hardware Description

The following sections give a detailed description of the board hardware and how it can be used. Figure 2 shows the XMC4500 Relax Lite Kit-V1, Figure 3 shows the XMC4500 Relax Kit-V1.

Figure 2 XMC4500 Relax Lite Kit-V1

Pin Header X1 Reset Button

Voltage

RegulatorPower

LED

Pin Header X2

XMC4500

Microcontroller User

Buttons & LEDs

Cortex Debug

(10Pin)

XMC4500

Debug IC

Micro USB

Evaluation

Board

Detachable

Debugger

12 MHz XTAL

Micro USB

Debug

LED

PCB_Block_Lite.emf



Figure 3 XMC4500 Relax Kit-V1

Pin Header X1 Reset Button

Voltage

RegulatorPower

LED

Pin Header X2

XMC4500

MicrocontrollerUser

Buttons & LEDs

Cortex Debug

(10Pin)

XMC4500

Debug IC

Micro USB

Micro USB

Evaluation

Board

Detachable

Debugger

Ethernet

RJ45 & PHY

qSPI Flash

microSD

RTC XTAL

12 MHz XTAL Debug

LED

PCB_Block.emf



2.1 Power Supply

The XMC4500 Relax/Relax Lite Kit-V1 must be supplied by an external 5 Volt DC power supply connected to any of the Micro UBS plugs (X3, X100). Out of the box with the pre-programmed web server application and the on-board debugger in operation the XMC4500 Relax Kit-V1 typically draws about 250 mA. The XMC4500 Relax Lite Kit-V1 without the web server capabilities draws about 200 mA. This current can be delivered via the USB plug of a PC, which is specified to deliver up to 500 mA. The Power LED indicates the presence of the generated 3.3V supply voltage.

On-board reverse current protection diodes will ensure safe operation in case power is provided through both USB plugs at the same time. These protection diodes allows to use the on-board debugger connected with a PC/Notebook via X100 and a second host PC/Laptop connected with the XMC4500 Relax Kit via X3.

If the board is powered via a USB plug, it’s not recommended to apply an additional 5 Volt power supply to one of the 5 Volt power pins (VDD5) on the pin headers X1 or X2, because there is no protection against reverse current into the external power supply. These power pins can be used to power an external circuit. But care must be taken not to draw more current than USB can deliver. A PCs as USB host typically can deliver up to 500 mA current. If higher currents are required and in order to avoid damages on the USB host the use of an external USB power supply unit which is able to deliver higher currents than 500 mA is strongly recommended.

After power-up the Debug LED starts blinking. In case there is a connection to a PC via the Debug USB plug X100 and the USB Debug Device drivers are installed on this PC, the Debug LED will turn from blinking to constant illumination.

Figure 4 Power Supply Concept

XMC4500

Relax/Relax Lite Kit-V1

3.3V+5V

Power.emf

Pin Header X1 and X2

2x20, 0.1"

Micro

USB**

Micro

USB*Lin. Voltage

Regulator

IFX1763

IC101

XMC4500

Debug IC

IC100

XMC4500

Micro-

controller

IC1

Power

LED

Eth

Phy

X3

* Micro USB on Evaluation Board

** Micro USB on Detachable Debugger

IC200

X100

Infineon

Infineon

Infineon

Infineon

Infineon



2.2 Pin Header Connector

The pin headers X1 and X2 can be used to extend the evaluation board or to perform measurements on the XMC4500. Figure 5 shows the available GPIOs/signals at the pin headers. The pinning table is also printed onto the bottom side of the PCB.

2 1 2 1

GND GND GND GND

4 GND GND 3 4 GND GND 3

6 P5.7 P2.6 5 6 RESET# GND 5

8 P5.1 P5.2 7 8 P2.10 P2.1 7

10 P1.15** P5.0 9 10 P14.8 P2.14 9

12 P1.13 P1.14** 11 12 P14.9 P2.15 11

14 P1.11 P1.12 13 14 P14.0 VAREF 13

16 P1.5*** P1.10*** 15 16 P14.2 P14.1 15

18 P1.3*** P1.4*** 17 18 P14.4 P14.3 17

20 P1.1* P1.2*** 19 20 P14.6 P14.5 19

22 P1.9 P1.0* 21 22 P14.12 P14.7 21

24 P0.8 P1.8*** 23 24 P14.14 P14.13 23

26 P3.4 P0.7 25 26 P15.2 P14.15 25

28 P0.12 P3.3 27 28 HIB_IO_0 P15.3 27

30 P0.6 P0.11 29 30 P3.0 HIB_IO_1 29

32 P0.2 P0.5 31 32 P3.2 P3.1 31

34 P0.4 P0.3 33 34 P0.1 P0.9 33

36 GND GND 35 36 P0.0 P0.10 35

38 VDD3.3 VDD3.3 37 38 VDD3.3 VDD3.3 37

40 VDD5 VDD5 39 40 VDD5 VDD5 39

* P1.1 is connected to LED1, P1.0 is connected to LED2 (2 mA load, ~2 V clip of input signal)

** P1.14 is connected to BUTTON1, P1.15 is connected to BUTTON 2 (both with a 100 nF capacitor in parallel)

*** These pins are connected to the on-board SPI Fash Memory (not valid for Relax Lite):

X2.23 = Port 1.8 = SPI Flash CS#

X2.15 = Port 1.10 = SPI Flash CLK

X2.16 = Port 1.5 = SPI Flash DI (IO0)

X2.17 = Port 1.4 = SPI Flash DO (IO1)

X2.18 = Port 1.3 = SPI Flash WP# (IO2)

X2.19 = Port 1.2 = SPI Flash HOLD# (IO3)

Pin Header X2 Pin Header X1(Top View)

Figure 5 Signal mapping of the pin headers

The XMC4500 provides a flexible mapping of functions to different pins. Figure 6 shows an example how the communication peripheral functions UART, I2C, SPI, CAN and I2S can be mapped to XMC4500’s GPIOs. GPIOs with the same colour code belong to the same group of physical pins and cannot be choosen twice. For instance UART-3 has got a pin overlap with I2C-Master1 and therefore this combination cannot work in parallel. Please also avoid pheripheral combinations which are using the same USIC channel. For example I2C-Master2 and UART-3 utilizing USIC 0 Channel 0 (U0C0), therefore this combination does not work in parallel.



UART UART-1 UART-2 UART-3 UART-4

TX P0.1 / U1C1.DOUT0 P1.5 / U0C0.DOUT0 P5.1 / U0C0.DOUT0 P0.5 / U1C0.DOUT0

RX P0.0 / U1C1.DX0D P1.4 / U0C0.DX0B P5.0 / U0C0.DX0D P0.4 / U1C0.DX0A

I2C Master/Slave I2C-Master1 I2C-Master2 I2C-Master3 I2C-Slave1 I2C-Slave2

SCL (clock) P5.2 / U2C0.SCLKOUT P1.10 / U0C0.SCLKOUT P0.11 / U1C0.SCLKOUT P5.2 / U2C0.DX1A P0.11 / U1C0.DX1A

SDA (data)

P5.0 / U2C0.DOUT0 / .DX0B

P1.5 / U0C0.DOUT0 /.DX0A

P0.5 / U1C0.DOUT0 /.DX0B

P5.0 /U2C0.DOUT0 / .DX0B


SPI Master/Slave SPI-Master1 SPI-Master2 SPI-Master3 SPI-Master4 SPI-Slave1 SPI-Slave2

MOSI P0.1 / U1C1.DOUT0 P5.0 / U2C0.DOUT0 P1.5 / U0C0.DOUT0 P0.5 / U1C0.DOUT0 P0.0 / U1C1.DX0D P0.4 / U1C0.DX0A

MISO P0.0 / U1C1.DX0D P5.1 / U2C0.DX0A P1.4 / U0C0.DX0B P0.4 / U1C0.DX0A P0.1 / U1C1.DOUT0 P0.5 / U1C0.DOUT0

SCK (clock) P0.10 / U1C1.SCLKOUT P5.2 / U2C0.SCLKOUT P1.10 / U0C0.SCLKOUT P0.11 / U1C0.SCLKOUT P0.10 / U1C1.DX1A P0.11 / U1C0.DX1A

CS (chip select) P0.9 / U1C1.SELO0* P2.6 / U2C0.SELO4 P1.11 / U0C0.SELO0** P0.6 / U1C0.SELO0 P0.9 / U1C1.DX2A P0.6 / U1C0.DX2A

CAN CAN-1 CAN-2

TX P1.12 / CAN.N1_TXD P1.4 / CAN.N0_TXD

RX P1.13 / CAN.N1_RXDC P1.5 / CAN.N0_RXDA

I2S Master/Slave I2C-Master1 I2C-Master2 I2C-Master3 I2C-Slave1

SCK (clock) P5.2 / U2C0.SCLKOUT P1.10 / U0C0.SCLKOUT P0.11 / U1C0.SCLKOUT P0.11 / U1C0.DX1A

SD (data)


P1.5 / U0C0.DOUT0 /.DX0A



WS (wait) P2.6 / U2C0.SEL04 P1.11 / U0C0.SELO0 P0.6 / U1C0.SELO0 P0.6 / U2C0.DX2A

* more chip select signals for U1C1 can be found at P3.3, P3.4, P3.5, P3.6

** another chip select signal for U0C0 can be found at P1.8

Figure 6 Mapping of communication peripherals to GPIOs and it’s corresponding functions

XMC4500 Relax Kit-V1 XMC4500 Relax Lite Kit-V1 Production Data


3 Production Data

3.1 Schematics

This chapter contains the schematics for the XMC4500 Relax/Relax Lite Kit-V1:

Figure 7: CPU, Pin Headers, Buttons, LEDs, Reset

Figure 8: On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal



Figure 7 CPU, Pin Headers, Buttons, LEDs, Reset

AGND

AGND

10uF/10V

10uF/10V

100nF

100nF

100nF

100nF

100nF

100nF

100nF

100nF

10uF/10V

15pF

15pF

100nF

100nF

10nF

100nF

100nF

ES

D8V

0L2B

-03L

BA

T60A

BA

T54-0

2V

GN

D

GN

D

GN

DG

ND

GN

DG

ND

GN

DG

ND

GN

D

GN

DG

ND

GN

DG

ND

GN

D

GN

DG

ND

GN

D

GN

D

GN

D

GN

D

GN

D

GN

D

XM

C4500_LQ

FP

100

BLM

18P

G600

BLM18PG600

BLM18PG600

LED-RT/D/0603LED-RT/D/0603

12M

HZ

/S/3

.2X

2.5

10k/0402680R680R

10k10k

33R

33R

510R

TM

PS

2-S

MD

TM

PS

2-S

MD

TM

PS

2-S

MD

VDD5

VDD5

VDD3.3

VDD3.3

VDD5

VDD5

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD5

VDD3.3VDD3.3

VDD3.3

VDD3.3

VDD3.3

2x20

2*2

0

ZX62-AB-5PA

FT

SH

-105-0

1-F

-D-K

XM

C4500-F

100x1024

P0.[0..15],P

1.[0..15],P

2.[0..15],P

3.[0..15],P

4.[0..7],P

5.[0..11],P

6.[0..6],P

14.[0..15],P

15.[2..15],H

IB_IO

_0,H

IB_IO

_1

DB

GP

RE

S#

ET

H_C

LK

ET

H_C

RS

ET

H_M

DC

ET

H_M

DIO

ET

H_R

XD

0E

TH

_R

XD

1E

TH

_R

XE

R

ET

H_T

XD

0E

TH

_T

XD

1

ET

H_T

XE

N

HIB

_IO

_0

HIB

_IO

_0

HIB

_IO

_1

HIB

_IO

_1

MM

C_C

LK

MM

C_C

MD

MM

C_D

AT

0

MM

C_D

AT

1M

MC

_D

AT

2

MM

C_D

AT

3

P0.0

P0.0

P0.1

P0.1

P0.2

P0.2

P0.3

P0.3

P0.4

P0.4

P0.5

P0.5

P0.6

P0.6

P0.7

P0.7

P0.7

P0.8

P0.8

P0.9

P0.9

P0.1

0

P0.1

0

P0.1

1

P0.1

1

P0.1

2

P0.1

2

P1.0

P1.0

P1.0

P1.1

P1.1

P1.1

P1.2

P1.2

P1.3

P1.3

P1.4

P1.4

P1.5

P1.5

P1.8

P1.8

P1.9

P1.9

P1.1

0

P1.1

0

P1.1

1

P1.1

1

P1.1

2

P1.1

2

P1.1

3

P1.1

3

P1.1

4

P1.1

4

P1.1

4

P1.1

5

P1.1

5

P1.1

5

P2.1

P2.1

P2.1

P2.6

P2.6

P2.1

0

P2.1

0

P2.1

4

P2.1

4

P2.1

5

P2.1

5

P3.0

P3.0

P3.1

P3.1

P3.2

P3.2

P3.3

P3.3

P3.4

P3.4

P5.0

P5.0

P5.1

P5.1

P5.2

P5.2

P5.7

P5.7

P14.0

P14.0

P14.1

P14.1

P14.2

P14.2

P14.3

P14.3

P14.4

P14.4

P14.5

P14.5

P14.6

P14.6

P14.7

P14.7

P14.8

P14.8

P14.9

P14.9

P14.1

2

P14.1

2

P14.1

3

P14.1

3

P14.1

4

P14.1

4

P14.1

5

P14.1

5

P15.2

P15.2

P15.3

P15.3

RE

SE

T#

RE

SE

T#

RE

SE

T#

RE

SE

T#

RT

C1

RT

C2

TC

K

TC

K

TM

ST

MS

US

B_D

MU

SB

_D

P

VA

RE

F

VA

RE

F

VD

DA

VD

DC

AD

J_1

AD

J_2

AD

J_3

C1

C2

C3

C4

C5

C6

C7

C8

C9

C10

C11

C12

C13

C16

C17

C20

C24

C25

1

23

D1

AC

D2

21

D3

EP

AD

EX

P

HIB

_IO

_0

14

HIB

_IO

_1

13

P0

.02

P0

.11

P0

.21

00

P0

.39

9P

0.4

98

P0

.59

7P

0.6

96

P0

.78

9P

0.8

88

P0

.94

P0

.10

3P

0.1

19

5P

0.1

29

4

P1

.07

9P

1.1

78

P1

.27

7P

1.3

76

P1

.47

5P

1.5

74

P1

.68

3P

1.7

82

P1

.88

1P

1.9

80

P1

.10

73

P1

.11

72

P1

.12

71

P1

.13

70

P1

.14

69

P1

.15

68

P2

.05

2P

2.1

51

P2

.25

0P

2.3

49

P2

.44

8P

2.5

47

P2

.65

4P

2.7

53

P2

.84

6P

2.9

45

P2

.10

44

P2

.14

41

P2

.15

40

P3

.07

P3

.16

P3

.25

P3

.39

3P

3.4

92

P3

.59

1P

3.6

90

P4

.08

5

P4

.18

4

P5

.05

8P

5.1

57

P5

.25

6P

5.7

55

P1

4.0

31

P1

4.1

30

P1

4.2

29

P1

4.3

28

P1

4.4

27

P1

4.5

26

P1

4.6

25

P1

4.7

24

P1

4.8

37

P1

4.9

36

P1

4.1

22

3P

14

.13

22

P1

4.1

42

1P

14

.15

20

P1

5.2

19

P1

5.3

18

P1

5.8

39

P1

5.9

38

PO

RS

T#

65

RT

C_

XT

AL

_1

15

RT

C_

XT

AL

_2

16

TC

K6

7

TM

S6

6

US

B_

D+

9U

SB

_D

-8

VA

GN

D3

2V

AR

EF

33

VB

AT

17

VB

US

10

VD

DA

35

VD

DC

12

VD

DC

14

2V

DD

C2

64

VD

DC

38

6

VD

DP

11

VD

DP

14

3V

DD

P2

60

VD

DP

38

7

VS

S5

9

VS

SA

34

VS

SO

63

XT

AL

16

1

XT

AL

26

2

IC1

L1

L2

L3

LED1LED2

Q1

R1R3R4

R5R6

R10

R11

R12

PP

1S S

1

SW

1

PP

1S S

1

SW

2

PP

1S S

1

SW

3

12

34

56

78

91

01

11

21

31

41

51

61

71

81

92

02

12

22

32

42

52

62

72

82

93

03

13

23

33

43

53

63

73

83

94

0

X1

12

34

56

78

91

01

11

21

31

41

51

61

71

81

92

02

12

22

32

42

52

62

72

82

93

03

13

23

33

43

53

63

73

83

94

0

X2

1 2 3 4 5

12

34

56

78

91

0

X5

X3

D1

D2

A B C D E

12

34

56

78

A B C D E

12

34

56

78

XM

C4

50

0_

Re

lax

-V1

25.1

0.2

012 1

3:0

2:0

4

1/2

Sh

ee

t:

Legal D

iscla

imer

The info

rmation g

iven in this

docum

ent shall

in n

o e

vent be r

egard

ed a

s a

guara

nte

e o

f conditio

ns o

r

chara

cte

ristics. W

ith r

espect to

any e

xam

ple

s o

r hin

ts g

iven h

ere

in, any typic

al valu

es s

tate

d h

ere

in a

nd/o

r any

info

rmation r

egard

ing the a

pplic

ation o

f th

e d

evic

e, In

fineon T

echnolo

gie

s h

ere

by d

iscla

ims a

ny a

nd a

ll w

arr

anties

and lia

bili

ties o

f any k

ind, in

clu

din

g w

ithout lim

itation, w

arr

anties o

f non-infr

ingem

ent of in

telle

ctu

al pro

pert

y r

ights

of any third p

art

y.

US

B

Supply

Analo

g

Dig

ital

Hib

ern

ate

/RT

C

XM

C4500 R

ela

x/R

ela

x L

ite K

it

V1 / 2

5.1

0.2

012

LED2LED1

BU

TT

ON

2

BU

TT

ON

1

US

B C

onnecto

r

Reset

Buttons &

LE

Ds

Cort

ex D

ebug

XMC4500 Relax and XMC4500 Relax Lite

2mA LED2mA LED

TD

O/S

WO

TD

I



Figure 8 On-board Debugger, Power Supply, Ethernet, Quad-SPI Memory, SD Card Slot, RTC Crystal

15pF

15pF

100nF

15pF

15pF

100nF

100nF

10uF/10V

10uF/10V

100nF

100nF

10uF/10V

10uF/10V

22uF/10V

100nF22uF/10V

100nF

22uF/10V

100nF

22pF

22pF

100nF

100nF10uF/10V

100nF

ES

D8V

0L2B

-03L

BAT60A

BAT54-02V

BA

T54-0

2V

GN

D

GN

D

GN

DG

ND

GN

DG

ND

GN

D

GN

D

GN

D

GN

D

GN

DG

ND

GN

D

GN

DG

ND

GN

D

GN

DG

ND

GN

DG

ND

GN

DG

ND

GN

DG

ND

GN

DG

ND

GN

DG

ND

XM

C4500_LQ

FP

100

IFX

1117M

EV

33

S25F

L032P

0X

MF

I01

BLM

18P

G600

BLM18PG600

BLM

18P

G600

LED-GN/D/0603

LED-GN/D/0603

32.7

68K

Hz

12M

HZ

/S/3

.2X

2.5

25M

Hz/5

0ppm

10k

680R

33R

/0402

33R

/0402

510R

/0603

100R

10k

680R/0603

1k

120R

1k

6k49

no a

ss./0R

120R

10k

10k

10k

10k

10k

10k

10k

10k

VDD3.3

VDD3.3

VDD5

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD3.3

VDD5

ZX62-AB-5PA

no a

ss.

Würt

h 7

499010211A

3M

_2908-0

5W

B

XM

C4500-F

100x1024

CS

CS

DB

GP

RE

S#

DE

BU

G_LE

D

ET

H_C

LK

ET

H_C

RS

ET

H_M

DC

ET

H_M

DIO

ET

H_R

XD

0E

TH

_R

XD

1E

TH

_R

XE

R

ET

H_T

XD

0E

TH

_T

XD

1

ET

H_T

XE

N

MM

C_C

LK

MM

C_C

MD

MM

C_D

AT

0M

MC

_D

AT

1

MM

C_D

AT

2M

MC

_D

AT

3

P0.0

P0.0

P0.1

P0.1

P0.7

P1.2

P1.3

P1.4

P1.5

P1.8

P1.1

0

P2.1

P2.1

P2.1

P2.1

0

P3.1

RE

SE

T#

RE

SE

T#

RE

SE

T#

RT

C1

RT

C2

TC

K

TC

K

TC

K

TM

S

TM

S

WT

CK

WT

MS

C14

C15

C19

C100

C101

C102

C103

C104

C105

C106

C108

C109

C110

C200

C201

C202

C203

C204

C205

C206

C207

C208

C209

C210

C400

1

23

D101

ACD102

21D200

21

D201

EP

AD

EX

P

HIB

_IO

_0

14

HIB

_IO

_1

13

P0

.02

P0

.11

P0

.21

00

P0

.39

9P

0.4

98

P0

.59

7P

0.6

96

P0

.78

9P

0.8

88

P0

.94

P0

.10

3P

0.1

19

5P

0.1

29

4

P1

.07

9P

1.1

78

P1

.27

7P

1.3

76

P1

.47

5P

1.5

74

P1

.68

3P

1.7

82

P1

.88

1P

1.9

80

P1

.10

73

P1

.11

72

P1

.12

71

P1

.13

70

P1

.14

69

P1

.15

68

P2

.05

2P

2.1

51

P2

.25

0P

2.3

49

P2

.44

8P

2.5

47

P2

.65

4P

2.7

53

P2

.84

6P

2.9

45

P2

.10

44

P2

.14

41

P2

.15

40

P3

.07

P3

.16

P3

.25

P3

.39

3P

3.4

92

P3

.59

1P

3.6

90

P4

.08

5

P4

.18

4

P5

.05

8P

5.1

57

P5

.25

6P

5.7

55

P1

4.0

31

P1

4.1

30

P1

4.2

29

P1

4.3

28

P1

4.4

27

P1

4.5

26

P1

4.6

25

P1

4.7

24

P1

4.8

37

P1

4.9

36

P1

4.1

22

3P

14

.13

22

P1

4.1

42

1P

14

.15

20

P1

5.2

19

P1

5.3

18

P1

5.8

39

P1

5.9

38

PO

RS

T#

65

RT

C_

XT

AL

_1

15

RT

C_

XT

AL

_2

16

TC

K6

7

TM

S6

6

US

B_

D+

9U

SB

_D

-8

VA

GN

D3

2V

AR

EF

33

VB

AT

17

VB

US

10

VD

DA

35

VD

DC

12

VD

DC

14

2V

DD

C2

64

VD

DC

38

6

VD

DP

11

VD

DP

14

3V

DD

P2

60

VD

DP

38

7

VS

S5

9

VS

SA

34

VS

SO

63

XT

AL

16

1

XT

AL

26

2

IC100

ADJ1

IN3

OU

T1

2

OU

T2

4

IC101

CR

S_

DV

15

GN

D2

2

INT

RP

18

LE

D0

23

MD

C1

1

MD

IO1

0

P_

GN

DE

XP

RE

F_

CL

K1

6

RE

XT

9

RS

T#

24

RX

D0

13

RX

D1

12

RX

ER

17

RX

M3

RX

P4

TX

D0

20

TX

D1

21

TX

EN

19

TX

M5

TX

P6

VD

DA

_3

.32

VD

DIO

14

VD

D_

1.2

1

XI

8

XO

7

CL

K6

CS

#1

DI

5

DO

2

GN

D4

HO

LD

#7

VC

C8

WP

#3

IC400

12

34

56

78

JP

500

12

34

56

78

JP

501

L100

L200

L201

LED100

LED101

Q2

Q100

Q200

R7

R100

R101

R102

R103

R104

R105

R106

R200

R201

R203

R204

R206

R207

R300

R301

R302

R303

R304

R400

R401

R402

1 2 3 4 5

X100C

1234

X101

CG

8

CT

R5

CT

T4

LA

9

LC

10

NC

7

RA

12

RC

11

RD

+3

RD

-6

S1

S1

S2

S2

TD

+1

TD

-2

X200

CL

K/S

CK

5

CM

D/M

OS

I3

DA

T0

/MIS

O7

DA

T1

8

DA

T2

1

DA

T3

/CS

_N

2

GN

D6

S1

S1

S2

S2

S3

S3

S4

S4

VD

D4

X300

IC200

KS

Z8031R

NL

D1

D2

A B C D E

12

34

56

78

A B C D E

12

34

56

78

XM

C4

50

0_

Re

lax

-V1

25.1

0.2

012 1

3:0

2:0

4

2/2

Sh

ee

t:

Legal D

iscla

imer

The info

rmation g

iven in this

docum

ent shall

in n

o e

vent be r

egard

ed a

s a

guara

nte

e o

f conditio

ns o

r

chara

cte

ristics. W

ith r

espect to

any e

xam

ple

s o

r hin

ts g

iven h

ere

in, any typic

al valu

es s

tate

d h

ere

in a

nd/o

r any

info

rmation r

egard

ing the a

pplic

ation o

f th

e d

evic

e, In

fineon T

echnolo

gie

s h

ere

by d

iscla

ims a

ny a

nd a

ll w

arr

anties

and lia

bili

ties o

f any k

ind, in

clu

din

g w

ithout lim

itation, w

arr

anties o

f non-infr

ingem

ent of in

telle

ctu

al pro

pert

y r

ights

of any third p

art

y.

US

B

Supply

Analo

g

Dig

ital

Hib

ern

ate

/RT

C

(IO

0)

(IO

1)

(IO

3)

(IO

2)

RJ45

XM

C4500 R

ela

x/R

ela

x L

ite K

it

Debug

Mic

ro S

D-C

ard

qS

PI F

lash

Pow

er

V1 / 2

5.1

0.2

012

RT

C C

rysta

l

On-b

oard

Debugger

Eth

ern

et

Debug C

onnecto

r

Power

Rela

x K

it o

nly

Rela

x K

it o

nly

Rela

x K

it o

nly

Rela

x K

it o

nly

SW

V

TD

I

TM

S

TC

K

TD

O

4 TH-Pads

2mA LED

IC100_R

XD

IC100_T

XD

2.54mm pitch



3.2 Components Placement and Geometry

Figure 9 Components Placement and Geometry

75.5 mm

98.52 mm

50.8

mm

3.4

mm

47.4

mm

50x 0.4mm

drills, NPTH

27.2

mm

9.2

mm

36.4

mm

BU

TT

ON

1

Po

wer

BU

TT

ON

2

LE

D2

LE

D1

RE

SE

T

X1

X2

www.infineon.com/xmc-dev

1

2

1

2

IC1

Q1

X3

X5

IC101

Q100

IC10

0 X100

IC400

X300

Q2

IC200

X200

XMC4500 Relax/Relax Lite Kit-V1

1

Debug

1 1

10 20 30

9 19 29

P1.0

P1.1

1234

91

01

11

2

13

57

86

42

LE

FT

RIG

HT

FR

ON

T

ca

rd I

N

ca

rd O

UT

1

40

1

40

ADJ_1 ADJ_2

ADJ_3

C1

C2

C3

C4

C5

C6

C7C

8

C9

C10

C11

C12

C13

C14

C15

C16

C17

C19

C20

C24

C25

C100

C101

C102

C103

C104

C105

C106

C108

C109

C110

C200

C201

C202

C203C

204

C205

C206

C207

C208

C209

C210

C400

D1

D2

D3

D101D

102

D200

D201

IC1

IC100

IC101

IC200

IC400

JP500 JP501

L1L2

L3

L100

L200

L201

LE

D1

LE

D2

LE

D100

LE

D101

Q1

Q2

Q100

Q200

R1

R3

R4

R5

R6

R7

R10

R11

R12

R100

R101

R102

R103

R104

R105

R106

R200

R201

R203

R204

R206

R207

R300

R301

R302

R303

R304

R400

R401

R402

SW

1S

W2

SW

3

X1

X2

X3

X5

X100

X101

X200

X300



3.3 List of Material

The list of material is valid for the XMC4500 Relax/Relax Lite Kit-V1.

Table 2 List of Material

No. Qty Value Device Reference Designator

1 2 2x4 Pin Header 0.1” TH JP500, JP501

2 2 1k Resistor R200, R203

3 1 2*20 Pin Header 0.1” TH X2

4 1 2x20 Pin Header 0.1” TH X1

5 1 3M_2908-05WB microSD Card Holder X300

6 1 6k49 Resistor R204

7 12 10k Resistor R5, R6, R7, R105, R300, R301, R302, R303, R304, R400, R401, R402

8 1 10k/0402 Resistor R1

9 1 10nF Capacitor C20

10 8 10uF/10V Capacitor C1, C2, C11, C104, C105, C109, C110, C210

11 2 12MHz/S/3.2X2.5 Crystal 12 MHz Q1, Q100

12 6 15pF Capacitor C12, C13, C14, C15, C100, C101

13 2 22pF Capacitor C206, C207

14 3 22uF/10V Capacitor C200, C202, C204

15 1 25MHz/50ppm Crystal 12 MHz Q200

16 1 32.768KHz Crystal 32 kHz Q2

17 2 33R Resistor R10, R11

18 2 33R/0402 Resistor R101, R102

19 1 100R Resistor R104

20 23 100nF Capacitor

C3, C4, C5, C6, C7, C8, C9, C10, C16, C17, C19, C24, C25, C102, C103, C106, C108, C201, C203, C205, C208, C209, C400

21 2 120R Resistor R201, R207

22 1 510R Resistor R12

23 1 510R/0603 Resistor R103

24 3 680R Resistor R3, R4, R100

25 1 680R/0603 Resistor R106

26 3 BAT54-02V Schottky Diode, Infineon D3, D200, D201

27 2 BAT60A Schottky Diode, Infineon D2, D102

28 6 BLM18PG600 Inductor L1, L2, L3, L100, L200, L201

29 2 ESD8V0L2B-03L TVS Diode, Infineon D1, D101

30 3 FIDUCIAL FIDUCIAL ADJ_1, ADJ_2, ADJ_3

31 1 FTSH-105-01-F-D-K Connector 2x5, Samtec X5

32 1 IFX1117MEV33 Linear Voltage Regulator, Infineon IC101

33 1 KSZ8031RNL Ethernet Phy, Micrel IC200

34 2 LED-GN/D/0603 LED green LED100, LED101

35 2 LED-RT/D/0603 LED red LED1, LED2

36 1 S25FL032P0XMFI01 Quad-SPI Flash, Spansion IC400



Table 2 List of Material

No. Qty Value Device Reference Designator

37 3 TMPS2-SMD Push Button SW1, SW2, SW3

38 1 7499010211A Ethernet RJ45 Plug, Würth X200

39 2 XMC4500-F100F1024 Microcontroller Cortex M4F, Infineon IC1, IC100

40 2 ZX62-AB-5PA Micro USB Plug X3, X100

41 1 no ass. Pin Header 1x4 X101

42 1 no ass./0R Resistor R206

w w w . i n f i n e o n . c o m

Published by Infineon Technologies AG

evaluation board - rs components · figure 4 power supply concept xmc4500 relax/relax lite kit-v1...

Documents