equilibrium of rigid bodies in two dimensions. when a rigid body is in equilibrium, both the...
TRANSCRIPT
![Page 1: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/1.jpg)
EQUILIBRIUM OF RIGID BODIES
IN TWO DIMENSIONS
![Page 2: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/2.jpg)
When a rigid body is in equilibrium, both the resultant
force and the resultant couple must be zero.
0
0
0
0
kMjMiM
M
kRjRiR
FR
zyx
zyx
![Page 3: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/3.jpg)
Forces and moments acting on a rigid body could be external
forces/moments or internal forces/moments.
Forces acting from one body to another by direct physical
contact or from the Earth are examples of external forces.
Fluid pressure acting to the wall of a water tank or a force
exerted by the tire of a truck to the road is all external forces.
![Page 4: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/4.jpg)
The weight of a body is also an external force.
Internal forces, on the other hand, keep the particles which
constitute the body intact.
Since internal forces occur in pairs that are equal in magnitude
opposite in direction, they are not considered in the equilibrium
of rigid bodies.
The first step in the analysis of the equilibrium of rigid bodies
must be to draw the “free body diagram” of the body in
question.
![Page 5: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/5.jpg)
Common Support / Connection Element Types in Two
Dimensional Analysis
In rigid bodies subjected to two dimensional force systems, the
forces exerted from supports and connection elements are shown
in the free body diagram as follows:
It should be kept in mind that reaction will occur along the
direction in which the motion of the body is restricted.
![Page 6: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/6.jpg)
![Page 7: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/7.jpg)
![Page 8: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/8.jpg)
![Page 9: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/9.jpg)
![Page 10: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/10.jpg)
Equations of Equilibrium in Two Dimensional Case
If all the forces acting on the rigid body are planar and all the couples are
perpendicular to the plane of the body, equations of equilibrium become two
dimensional.
0
0 0 0
kMM
FRFRjRiRFR
z
yyxxyx
or in scalar form,
0 0 0 Oyx MFF
At most three unknowns can be determined.
![Page 11: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/11.jpg)
Alternative Equations of Equilibrium
In two dimensional problems, in alternative to the above set of
equations, two more sets of equations can be employed in the
solution of problems.
Points A, B and C in the latter set cannot lie along the same line, if
they do, trivial equations will be obtained.
000
000
CBA
BAx
MMM
MMF
![Page 12: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/12.jpg)
Two-force Member
Members which are subjected to only two forces are named as “two force
members”. Forces acting on these members are equal in magnitude, opposite in
direction and are directed along the line joining the two points where the forces are
applied.
Weight is neglected. If weight is considered, the member will not be a two force member!
Hydraulic cylinder
P
P
P
P
P
P
Examples of two force members
P
By
Bx
Ax
Ay
FB
FA=FBFA
B
A
![Page 13: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/13.jpg)
![Page 14: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/14.jpg)
Three-Force Member
In rigid bodies acted on by only three forces, the lines of action of the forces must be
concurrent; otherwise the body will rotate about the intersection point of the two forces
due to the third force which is not concurrent. If the forces acting on the body are parallel,
then the point of concurrency is assumed to be in infinity.
A P B
FA FBP
![Page 15: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/15.jpg)
Free Body Diagram
The procedure for drawing a free body diagram which isolates a body or system
consists of the following steps:
1)If there exists, identify the two force members in the problem.
2)Decide which system to isolate.
3)Isolate the chosen system by drawing a diagram which represents its complete
external boundary.
4)If not given with the problem, select a coordinate system which appropriately
suits with the given forces and/or dimensions.
5)Identify all forces which act on the isolated system applied by removing the
contacting or attracting bodies, and represent them in their proper positions on
the diagram.
6)Write the equations of equilibrium and solve for the unknowns.
![Page 16: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/16.jpg)
![Page 17: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/17.jpg)
![Page 18: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/18.jpg)
![Page 19: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/19.jpg)
![Page 20: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/20.jpg)
![Page 21: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/21.jpg)
1. A 54 kg crate rests on the 27 kg pickup tailgate. Calculate the tension T in each of the two restraining cables, one of which is shown. The centers of gravity are at G1 and G2. The crate is located midway between the two cables.
![Page 22: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/22.jpg)
2. The uniform beam has a mass of 50 kg per meter of length.
Compute the reactions at the support O. The force loads shown
lie in a vertical plane.
![Page 23: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/23.jpg)
3. Calculate the magnitude of the force supported by the pin at C
under the action of the 900-N load applied to the bracket. Neglect
friction in the slot.
![Page 24: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/24.jpg)
4. Plate AB contains a smooth parabolic slot. Fixed pins B and C are
located at the positions shown in the figure. The equation of the
parabolic slot is given as y = x2/160 , where x and y are in mm. If it
is known that the force input P = 4 N, determine the forces applied
to the plate by the pins B and C and also the force output Q.
Q
Px
B
Cy
A
140 mm 60 mm 40 mm
20 mm
46 mm
120 mm
![Page 25: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/25.jpg)
5. The member ABC and the pulley at C together have a mass of 30
kg, with center of mass at G. Calculate the magnitude of the force
supported by the pin at A. Dimensions are given in “mm”s.
![Page 26: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/26.jpg)
6. The winch consists of a drum of
radius 30 cm, which is pin
connected at its center C. At its
outer rim is a ratchet gear having a
mean radius of 60 cm. The pawl
AB serves as a two force member
(short link) and holds the drum
from rotating. If the suspended
load is 500 N, determine the
horizontal and vertical components
reaction at the pin C.
60 cm
20 cm
70 cm
30 cm
![Page 27: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/27.jpg)
7. A large symmetrical drum for drying sand is operated by the geared motor
drive shown. If the mass of the sand is 750 kg and an average gear-tooth force
of 2.6 kN is supplied by the motor pinion A to the drum gear normal to the
contacting surfaces at B, calculate the average offset of the center of mass G
of the sand from the vertical centerline. Neglect all friction in the supporting
rollers.
x
![Page 28: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/28.jpg)
8. The mass center of 15-N link OC is located at G, and the spring constant of
k=25 N/m is unstretched length when =0. Calculate the tension T for static
equilibrium as a function of 090o). State the values of T and the
reactions at O for =arcsin(0.6).
![Page 29: EQUILIBRIUM OF RIGID BODIES IN TWO DIMENSIONS. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero](https://reader035.vdocuments.mx/reader035/viewer/2022081502/56649cec5503460f949b7caa/html5/thumbnails/29.jpg)
9. Pulley A delivers a steady torque of 100 Nm to a pump through its shaft at
C. The tension in the lower side of the belt is 600 N. The driving motor B has a
mass of 100 kg and rotates clockwise. As a design consideration, determine the
magnitude of the force on the supporting pin at O.