entering your traverse data in minesight
TRANSCRIPT
-
7/29/2019 Entering Your Traverse Data in MineSight
1/54
Entering Your Traverse Data
In MineSightFeb 2009 Dr. B. C. Paul
Note the following presentation includes screen shots an operating
suggestions for the program MineSight developed by Mintec Inc. The program
was developed by Mintec.
-
7/29/2019 Entering Your Traverse Data in MineSight
2/54
Start Up MineSight and Set the
Directory Where You Want to WorkYou will be using
This directory
For all your
Mapping the
Rest of the
Semester.
-
7/29/2019 Entering Your Traverse Data in MineSight
3/54
Create a Folder for Engineering
Building Traverse
-
7/29/2019 Entering Your Traverse Data in MineSight
4/54
Name the Folder and Click Ok
-
7/29/2019 Entering Your Traverse Data in MineSight
5/54
Create a Geometry Object to Hold the
Corners of the Engineering Building
You determined
These on your
Side shots
-
7/29/2019 Entering Your Traverse Data in MineSight
6/54
Put Your New Geometry Object
into Edit Mode (so you can put your data points
in it)
-
7/29/2019 Entering Your Traverse Data in MineSight
7/54
You Have the Handy Dandy Excel
Spreadsheet that has converted your survey
data to point coordinates
-
7/29/2019 Entering Your Traverse Data in MineSight
8/54
We Will Need to Set Up A Work
Area (we need to identify the state plane coordinate
area we will be working with)Activate
MineSight
Compass
-
7/29/2019 Entering Your Traverse Data in MineSight
9/54
It Tells Us It Could Not Find the
Boundary Files Saying Where to Work
Dahthats what
We are doing this
For at least we
Know the program
Is on the same
Page as us.
Click Ok
-
7/29/2019 Entering Your Traverse Data in MineSight
10/54
When Compass Opens Create a
New PCF (Project Control File)
-
7/29/2019 Entering Your Traverse Data in MineSight
11/54
You May Have to Tell it to Put the File
in the Directory You Are Working In
-
7/29/2019 Entering Your Traverse Data in MineSight
12/54
Fill Out the Programs
Questionnaire
Your working in
Feet
Its a 3D project
Give it a 4 letter
Name (preferably
Professional
Sounding) I
Picked Trav
I picked other for
My mineral type
But it really does
Not matter
Enter a projectDescri tion should be rofessional it will show u on all our re orts
-
7/29/2019 Entering Your Traverse Data in MineSight
13/54
Enter the Anticipated Coordinate
Range
My guess is
reasonable
-
7/29/2019 Entering Your Traverse Data in MineSight
14/54
The Initialization Runs
-
7/29/2019 Entering Your Traverse Data in MineSight
15/54
Make Sure We Get A Project File
-
7/29/2019 Entering Your Traverse Data in MineSight
16/54
We Will Tell It Where the Project
Control File Is
-
7/29/2019 Entering Your Traverse Data in MineSight
17/54
We Are Done We Will Close
Compass and Get On With Data Entry
-
7/29/2019 Entering Your Traverse Data in MineSight
18/54
Under the Utilities Menu Pick the
Point Editor
-
7/29/2019 Entering Your Traverse Data in MineSight
19/54
The Point Editor Comes On But is
Inactive
-
7/29/2019 Entering Your Traverse Data in MineSight
20/54
Go to Point Create
Th P i t Edit T O d th
-
7/29/2019 Entering Your Traverse Data in MineSight
21/54
The Point Editor Turns On and the
Operations Line Shows What We Are
Doing
-
7/29/2019 Entering Your Traverse Data in MineSight
22/54
Check the Boxes to Indicate That
We Will Be Inputting Coordinates
E t th C di t f th Fi t
-
7/29/2019 Entering Your Traverse Data in MineSight
23/54
Enter the Coordinates of the First
Corner using Data from the
Spreadsheet
-
7/29/2019 Entering Your Traverse Data in MineSight
24/54
Click Apply and Our First Point
Appears
-
7/29/2019 Entering Your Traverse Data in MineSight
25/54
Type in the Next Point
-
7/29/2019 Entering Your Traverse Data in MineSight
26/54
When I Click Apply the Next Point
Appears
-
7/29/2019 Entering Your Traverse Data in MineSight
27/54
After I Enter My First Set of A Team Points I
Click Right to Finish the Operation
I will then click
The weird looking
Save box to
Save my work.
-
7/29/2019 Entering Your Traverse Data in MineSight
28/54
The Saved Points Turn Blue
Now Im Going to Close That Set of
-
7/29/2019 Entering Your Traverse Data in MineSight
29/54
Now I m Going to Close That Set of
Building Corner Points and Put in
Some Others I left click theGolden box to take
Building Corners
Out of edit mode
-
7/29/2019 Entering Your Traverse Data in MineSight
30/54
As You Can See One Click Does
the Job
I Will Close My Building Corner
-
7/29/2019 Entering Your Traverse Data in MineSight
31/54
I Will Close My Building Corner
Points Because I Want to Put in My
Traverse Stations
I Created Geometry Objects for My A
-
7/29/2019 Entering Your Traverse Data in MineSight
32/54
I Created Geometry Objects for My A
and B Teams to Put in instrument
Stations
-
7/29/2019 Entering Your Traverse Data in MineSight
33/54
I Create My A Team Stations
-
7/29/2019 Entering Your Traverse Data in MineSight
34/54
Create My B Team Stations
-
7/29/2019 Entering Your Traverse Data in MineSight
35/54
Im Going To Put in My Traverse
Directions With Polylines
Ill set my snap
Mode to point
Snap so I can
Lock my polylines
Onto my points
-
7/29/2019 Entering Your Traverse Data in MineSight
36/54
Ill Give the Instruction to Create a
Polyline
-
7/29/2019 Entering Your Traverse Data in MineSight
37/54
I Digitize my A Team Movement
I will right click
The mouse to
Complete the
Traverse lines
-
7/29/2019 Entering Your Traverse Data in MineSight
38/54
I Digitize and Right Click My Mouse to
Complete the First Part of My Line
Note after right
Clicking once my
First pline turns
Red indicating it
Is complete
Also note that I
Am still in polyline
Create mode so
I can start on
Another polyline
(useful in this caseBecause the B
Team took a short
Dead end trip)
(A second right
Click would endThe pline function)
-
7/29/2019 Entering Your Traverse Data in MineSight
39/54
I Digitize in the rest of the B team
travel (to this point)
I will now right
Click twice
Once to end the
Addition of points
To the current
Polyline and aSecond time to
End the polyline
Create function
Ill then click save
-
7/29/2019 Entering Your Traverse Data in MineSight
40/54
I Want to Do A Little Color
differentiation of my teams
I will left click on
My A Team
Traverse
And then rightClick to bring up
The menu
Then I will left
Click on properties
-
7/29/2019 Entering Your Traverse Data in MineSight
41/54
The Object Properties Window
Opens
Left click on the
Color pallet
-
7/29/2019 Entering Your Traverse Data in MineSight
42/54
I Think I Will Turn the A Team
Purple
-
7/29/2019 Entering Your Traverse Data in MineSight
43/54
I Also Think I Will Put Some
Direction in the movement
Ill check off to
Put arrow heads
On the plines
I will choose my
Arrow head style
And I will choose
My size
Pick the polyline
tab
-
7/29/2019 Entering Your Traverse Data in MineSight
44/54
Why Im So Impressed Ill Do it For
the B team too!
S
-
7/29/2019 Entering Your Traverse Data in MineSight
45/54
ThereBut There Is Something Id
Like to Take a Better Look At
I C U M M K f
-
7/29/2019 Entering Your Traverse Data in MineSight
46/54
I Can Use My Mouse Keys for
Zooming Functions
Hold down the
Left mouse key
And center buttoOr scroll and
Move up or down
To zoom out or
in
-
7/29/2019 Entering Your Traverse Data in MineSight
47/54
In This Case Zooming in Took What I
Was Interested In Out of the Picture
Hold the
Center and right
Keys down toPan
-
7/29/2019 Entering Your Traverse Data in MineSight
48/54
I Knew You Were Going to Ask
What happens if
You hold down the
Left and right keys
The picture rotates
(this is usually not
Good for us
Because we want
A plane with northU
-
7/29/2019 Entering Your Traverse Data in MineSight
49/54
To Restore Things
Click the north
And east plane
View icon
Check to make
Sure the azimuthIs 0 for azimuth
To top of page
And the dip is
-90 (meaning you
Are lookingStraight down
From above){NoIm not trying to
Make you think you
Are God}
-
7/29/2019 Entering Your Traverse Data in MineSight
50/54
What Is Wrong With This Picture?
Survey Team B
Worked their
Way forward to
Point B3
And then did an
About face and
Went the other
Way instead
Of heading
Around theBuilding.
Why do I think
There is a bust in
The angle turned
At B3?
I Thi k I Will T O t th C
-
7/29/2019 Entering Your Traverse Data in MineSight
51/54
I Think I Will Trace Out the Corners
of the Engineering Building
I will create a
Geometry object
To hold the
Plines
Representing the
walls
-
7/29/2019 Entering Your Traverse Data in MineSight
52/54
Trace It On Out
Ill do a couple
Right clicks and
A save to finish
this
-
7/29/2019 Entering Your Traverse Data in MineSight
53/54
What is Wrong With This Picture?
We know this side
Of the Engineering
Building runs in
The same over-all
North East to
South West Direction
That first point looks
A little suspect
-
7/29/2019 Entering Your Traverse Data in MineSight
54/54
Isnt It Wonderful to Have a
Drawing Tell You What to
Resurvey?