en_1089_0376_00_ed27
DESCRIPTION
Atlas Copco temperature switch detailsTRANSCRIPT
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 1(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
INDICATING TEMPERATURE SWITCH
STORK Type 156..
Internal name + designation :
Temp. switch + Article number
Housing Black Plastic ABS Clamp Zinc plated for flushmounting Frontring Black RAL 9005 Front crystal Impact resistant polystrene Dial Ground: black RAL 9005 Spacer: between dial and frontcrystal black RAL 9005 Dial screws: black RAL 9005 Outer scale °C: white RAL 9010
outer ∅ 54 mm. index height long/short 4 / 2,5 index width 0,7/ 0,5 Inner scale °F: Yellow RAL 1021
Outer ∅ 34 mm. index height long/short 3 / 2 index width 0,5/ 0,3 Text: UNIVERS 67 outerscale 14 pts didot (3,3 mm.) innerscale 9 pts didot (2,2 mm.) Pointer Temperature indicator: white pointer RAL 9010 Setting indicator: red pointer RAL 3000 Ambient temperature at working: -40°C to +60°C Storage temperature: maximum +80°C Other Internal screws secured with loctite. With key to adjust the temperature setting. Supporting spring of the capillary in stainless steel.
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 2(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Range: 0°C to 150°C Capillary length 1500mm. Capillary and instrument calibrated for an ambient temperature at 40°C The indication for 120°C must be correct within 1,5°C The setting is limited to 125°C
1089 0376 01
Type SC 15600 S 105-0 Enclosure: front: IP 53 rear: IP 10 Sensor : stainless steel type: SF 91 with SV 19 – G ½” Connections: AMP plugs Contact rating: 5A at 250 V AC non inductive load 1A pilot duty
Range: 100°C to 300°C Capillary length 800mm. Capillary and instrument calibrated for an ambient temperature at 60°C The indication for 240°C must be correct within 3°C
1089 0376 02
Range: 0°C to 300°C Capillary length 5250mm. Capillary and instrument calibrated for an ambient temperature at 60°C The indication for 240°C must be correct within 3°C
1089 0376 03
Range: 0°C to 150°C Capillary length 1500mm. Capillary and instrument calibrated for an ambient temperature at 40°C The indication for 120°C must be correct within 1,5°C The setting is limited to 135°C
1089 0376 04
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 3(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Type SC15600 K 105 – 2 Enclosure: front: IP 53 rear: IP 54 With protection cap Cange over contact Connections: clamp terminals
Range from 0°C to 150°C Sensor: sensor shaft SF 91 stainless steel sensor immersion depth L = 72 mm. sealing bushing SF 19 brass sealing cone brass Capillary length 1500 mm. The setting is limited to 125 °C Contact rating: 5A at 250V AC non inductive load 1A pilot duty CSA certified: submitter’s name STORK + CSA monogram type and electrical rating UL recognized: marking company name + type
1089 0376 11
Range from 0°C to 150°C
Sensor: sensor shaft SF 91 stainless steel Shaft point must be welded sensor immersion depth L = 72 mm. sealing bushing SF 19 brass sealing cone stainless steel, welded on sensor shaft Capillary length 2000 mm. The setting is limited to 50 °C Contact rating: 5A at 250V AC non inductive load 1A pilot duty CSA certified - UL recognized The indication for 45°C must be correct within 1,5°C
1089 0376 12
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 4(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Range from 0°C to 150°C
Sensor: sensor shaft SF 19 stainless steel Shaft point must be welded sensor immersion depth L = 72 mm. sealing bushing SF 19 stainless steel sealing cone stainless steel, welded on sensor shaft Capillary length 2000 mm. The setting is limited to 50 °C Contact rating: 5A at 250V AC non inductive load 1A pilot duty
1089 0376 13
Range from 0°C to 150°C
Sensor: sensor shaft SF 91 stainless steel sensor immersion depth L = 72 mm. sealing bushing SF 19 brass sealing cone brass Capillary length 1500 mm. The setting is limited to 125 °C Contact rating: 5A at 250V AC non inductive load
1089 0376 15
Range from 0°C to 300°C
Sensor: stainless steel sensor immersion depth L = 52 mm. type SF 91 with SV 19 Capillary length 1500 mm. Contact rating: 5A at 250V AC non inductive load 1A pilot duty
1089 0376 21
Range from 0°C to 150°C
Sensor: sensor shaft SF 91 stainless steel sensor immersion depth L = 72 mm. sealing bushing SF 19 brass sealing cone brass Capillary length 300 mm. The setting is limited to 125 °C Contact rating: 5A at 250V AC non inductive load 1A pilot duty CSA certified: submitter’s name STORK + CSA monogram type and electrical rating UL recognized: marking company name + type Calibrated at 45°C
1089 0376 71 replaces 1089 0376 11
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 5(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Range from 0°C to 250°C Capillary length 2000 mm. Capillary and instrument calibrated for an ambient temp. at 40°C The indication for 120°C must be correct within 1,5°C The setting is limited to 180°C
1089 0376 31 type: SC 15600 S 105-0 Enclosure: front: IP 53 rear: IP 10 Sensor: brass type: SF 94 Connections: AMP plugs Contact rating: 5A at 250 V AC non inductive load 1A pilot duty
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 6(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Range from 0°C to 150°C Sensor: sensor shaft SF 91 stainless steel. shaft point must be welded. sealing bushing SF 19 stainless steel sealing cone stainless steel, welded on sensor shaft Capillary length 1500 mm. Capillary, protective braiding and reinforcement Spring in stainless steel
1089 0376 16
Type SC 15604 K 210 – 2 Enclosure: front: IP 53 Rear: IP 54 With protection cap Dual setting 2 separate change over contact rating 10 A at 250 V AC non inductive load Connections: clamp terminals
Range from 0°C to 150°C Sensor: sensor shaft SF 91 stainless steel. sensor immersion depth L = 72 mm sealing bushing SF 19 brass sealing cone brass Capillary length 1500 mm. The setting is limited to 125°C Contact rating: 5A at 250V AC non inductive load 1A pilot duty CSA certified: submitter’s name STORK + CSA monogram type and electrical rating UL recognized: marking company name + type Marking: green mark at 105°C red mark at 120°C
1089 0376 17
Range from 0°C to 150°C
Sensor: sensor shaft SF 91 stainless steel. shaft point must be welded. sealing bushing SF 19 stainless steel sealing cone stainless steel, welded on sensor shaft Capillary length 300 mm. Capillary, protective braiding and reinforcement Spring in stainless steel Calibrated at 45°C
1089 0376 76
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 7(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Range from 0°C to 150°C Two fixed settings: S1: 110 °C S2: 120 °C Sensor: sensor shaft SF 91 stainless steel. shaft point must be welded. sealing bushing SF 19 stainless steel sealing cone stainless steel, welded on sensor shaft Capillary length 1000 mm. Capillary, protective braiding and reinforcement Spring in stainless steel
1089 0376 77
Type SC 15604 K 210 – 2 Enclosure: front: IP 53 Rear: IP 54 With protection cap Dual setting 2 separate change over contact rating 10 A at 250 V AC non inductive load Connections: clamp terminals
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 8(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Range from 0°C to 160°C Sensor: sensor shaft SF 91 stainless steel Immersion depth: 40 mm. Sealing bushing SF 19 brass Sealing cone brass Capillary length 3000 mm.
1089 0376 18 Type SC 15604 K 205 – 0B Enclosure: front: IP 53 Rear: IP 54 With protection cap Dual setting Contact rating: 5A at 220 V AC non inductive load 1A pilot duty Connections: clamp terminals
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 9(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Range: 0°C to 150°C Capillary length 850 mm Sensor immersion depth L = 45 mm
Sensor diameter D1 = ∅ 8 mm. Capillary and instrument calibrated for an ambient temperature at 40°C The indication for 120°C must be correct within 1,5°C The setting is limited to 125 °C
1089 0376 19
Type SC 15600 S 105 – 0 Enclosure : front: IP 53 Rear: IP 10 Sensor : stainless steel type: SF 91 with SV 19 – G 3/8” Connections: AMP plugs Contact rating: 5A at 250 V AC, non inductive load 1A pilot duty
Range: 0°C to 150°C Capillary length 1500 mm Sensor immersion depth L = 72 mm
Sensor diameter D1 = ∅ 6 mm. Capillary and instrument calibrated for an ambient temperature at 40°C The indication for 120°C must be correct within 1,5°C The setting is limited to 135 °C
1089 0376 20
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 10(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Type 7
Technical data Article number
Common data Distinction data
Range (°C) D L (mm) L1 (mm) d (mm) 0 – 160 G 1/2 1000 66 6 1089 0376 41 0 – 160 G 3/8 1000 66 6 1089 0376 42 0 – 160 G 1/2 1500 66 6 1089 0376 43 -20 – 160 G 1/2 1000 57 6 1089 0376 44 -20 – 160 G 3/8 1000 70 6 1089 0376 45 -20 – 160 G 1/2 2000 57 6 1089 0376 46 -20 – 160 G 3/8 4000 70 6 1089 0376 47 -20 – 160 G 3/8 2500 57 6 1089 0376 48 -20 – 160 G 3/8 1150 110 4 1089 0376 49
Type SB 156028105 – 2U Enclosure : front: IP 53 Rear: IP 10 With protection cap Change over contact latched in break position manual RESET Connections: clamp terminals Pointer : Temperature- and setting Indicator: white pointer RAL 9010 The temperature switch has to be delivered in RESET POSITION Contact rating: 5A at 250 V AC, non inductive load 1A pilot duty The indication for 120°C must be Correct within 1,5°C The setting is adjusted at 110°C Range : see adjacent table Setting range: 90°C to 130°C Sensor: sensor shaft SF 91: stainless steel, L1: see table sealing bushing: SF 19 brass sealing cone: brass Capillary: stainless steel without supporting spring length L : see table
L
L1
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 11(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Range: 0°C to 150°C Capillary length 1500 mm Capillary and instrument calibrated for an ambient temperature at 40°C The indication for 120°C must be correct within 1,5°C The setting is limited to 125°C
1089 0376 05
Type SC 15600 S 105 – 0 Enclosure : front: IP 53 Rear: IP 00 Sensor : brass type: SF 91 with SV 19 – G 1/2” Connections: AMP plugs Contact rating: 5A at 250 V AC, non inductive load 1A pilot duty
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 12(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Type 9
Technical data Article number
Common data Distinction data
Type SC15600 S105 – 2U Housing : Black plastic polycarbonat Clamp : Zinc plated for flush mounting Front crystal : clear polycarbonat with O-ring Dial : background : black RAL9005 Outer scale °C : White RAL9010 Inner scale °F : Yellow RAL1021 Pointer : Temperature indicator : white pointer RAL9010 Setting indicator : red pointer RAL3000 With key to adjust the temperature setting Connections : 6.3 x 0.8 DIN 46 244 Sensor : stainless steel type SF 91 – G 3/8” Contact rating : 5A at 250V non inductive load Calibration : Indicating temp.240 ±2°C with a sensor temp of 240 °C (Ambient temp 40°C and capillary temp 60°C) Approvals : UL / CSA
Ref : 15 60 0440 Range : 100°C to 300 °C Capillary length : 5500 mm. Max. bending radius : 55 mm Enclosure : front : IP 65 rear : IP 54 Ref : 15 60 0428 Range : 100°C to 300 °C Capillary length : 5500 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54 Ref : Range : Capillary length : 5500 mm. Max. bending radius : 55 mm Enclosure : front : IP 65 rear : IP 54 Ref : 15 60 0439 Range : 100°C to 300 °C Capillary length : 3500 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54 Ref : 15 60 0437 Range : 0°C to 120 °C Capillary length : 3500 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54
1089 0376 60 replaces 1089 0502 13 1089 0376 50 replaces 1089 0502 01 1089 0376 66 replaces 1089 0502 27 1089 0376 64 replaces 1089 0502 31 1089 0376 54 replaces 1089 0502 05
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 13(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Ref : 15 60 0438
Range : 100°C to 300 °C Capillary length : 5000 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54 Ref : 15 60 0430 Range : 0°C to 120 °C Capillary length : 5000 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54 Ref : Range : 0°C to 120 °C Capillary length : 7000 mm. Max. bending radius : 55 mm Enclosure : front : IP 65 rear : IP 54 Ref : 15 60 0441 Range : 0°C to 120 °C Capillary length : 7000 mm. Max. bending radius : 55 mm Enclosure : front : IP 65 rear : IP 54 Ref : 15 60 0436 Range : 0°C to 120 °C Capillary length : 7000 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54 Ref : 15 60 0435 Range : 100°C to 300 °C Capillary length : 7000 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54 Ref : 15 60 0429 Range : 100°C to 300 °C Capillary length : 2600 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54
1089 0376 63 replaces 1089 0502 30 1089 0376 53 replaces 1089 0502 04 1089 0376 67 replaces 1089 0502 28 1089 0376 61 replaces 1089 0502 15 1089 0376 52 replaces 1089 0502 03 1089 0376 51 replaces 1089 0502 02 1089 0376 56 replaces 1089 0502 07
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 14(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Type 10
Technical data Article number
Common data Distinction data
Type SC15 60 4S 205 – 2U Housing : Black plastic polycarbonat Clamp : Zinc plated for flush mounting Front crystal : clear polycarbonat with O-ring Dial : background : black RAL9005 Outer scale °C : White RAL9010 Inner scale °F : Yellow RAL1021 Pointer : Temperature indicator : white pointer RAL9010 First setting indicator : red pointer RAL3000 Second setting indicator : green pointer RAL6010 With key to adjust the temperature setting Connections : 6.3 x 0.8 DIN 46 244 Sensor : stainless steel type SF 91 – G 3/8” Contact rating : 5A at 250V non inductive load Calibration : Indicating temp.240 ±2°C with a sensor temp of 240 °C (Ambient temp 40°C and capillary temp 60°C) UL / CSA
Ref : 15 60 4097 Range : 0°C to 120 °C Capillary length : 10000 mm. Max. bending radius : 55 mm Enclosure : front : IP 65 rear : IP 54 Ref : 15 60 4093 Range : 100°C to 300 °C Capillary length : 5500 mm. Max. bending radius : 55 mm Enclosure : front : IP 65 rear : IP 54 Ref : 15 60 4092 Range : 100°C –300°C Capillary length : 5500 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54 Ref : 15 60 4096 Range : 0°C to 120 °C Capillary length : 3500 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54 Ref : 15 60 4095 Range : 0°C to 120 °C Capillary length : 5000 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54
1089 0376 65 replaces 1089 0502 33 1089 0376 62 replaces 1089 0502 20 1089 0376 55 replaces 1089 0502 06 1089 0376 59 replaces 1089 0502 11 1089 0376 58 replaces 1089 0502 10
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 15(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Ref : 15 60 4094
Range : 0°C to 120 °C Capillary length : 7000 mm. Max. bending radius : 55 mm Enclosure : front : IP 53 rear : IP 54
1089 0376 57 replaces 1089 0502 09
Datum / date Uitgave / edition Blad / page
Published by : AIRPOWER STANDARDS DEPARTMENT
TECHNICAL SPECIFICATION GROUP STANDARDS DEPARTMENT ©
en 1089 0376 00
27 16(16) 2008-04-16
Ed
itio
n c
heck
- Lotu
s N
ote
s data
base S
tandard
Docum
ents
- G
SD
-
Inte
rnet U
RL h
ttp://a
tlascopco.c
om
/gsd
Technical data Article number
Common data Distinction data
Type: SC 00-060U-F1 0KS Enclosure: front: IP 53 rear: IP 50 with protection cap Case: steel painted hammergray Frontcrystal: glass Dial: white with black figures Scale: outside °C – inside °F Change over contact Contact rating: 5A at 250 V AC non inductive lead 1A pilot duty Connections: clamp terminals Ambient temp. at working: -40°C to +60°C Max. storage temp.: +80°C Red marking on dial at set temperature Internal screws secured with loctite Supporting spring of the capillary in stainless steel
Set at raising temp. of 120 °C Sensor: stainless steel Type SF 91 with SV 19 – G 1/2” Capillary length 1500 mm. Range from 0°C to 150°C CSA certified marking: Submittor’s name STORK adjacent to the CSA Monogram type SC 60-U and electrical rating. UL recognized; marking: company name and type SC 60-U-F1KS
1089 0376 14
OBSOLETE SHALL NOT BE USED
IN NEW DESIGN