electrosynthesis - sustainable and disruptive · electroorganic synthesis a n o d e + substrate...

43
Electrosynthesis - sustainable and disruptive Prof. Dr. Siegfried R. Waldvogel [email protected] Bingen, November 15 th , 2017

Upload: others

Post on 26-Jul-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electrosynthesis - sustainable and

disruptive

Prof. Dr. Siegfried R. Waldvogel

[email protected]

Bingen, November 15th, 2017

Page 2: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Dark side of the green world

• Current discussion: electrosyntheses as potential component

in smart grids

Regenerative:

• wind power

• photovoltaics

• solarthermal

• hydro power

• bio mass

Customers

„Power-to-

chemistry®" Conventional:

• Coal / gas

• nuclear power

time

supply

electricity

grid

Power sources

time

demand Energy storage,

„buffer systems“

Page 3: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Pros for electrosynthesis

• Inherently safe

• Saving metals and rare elements/resources

• No reagent waste

• Reactive power adjustable

• New synthetic approaches (short cut of many steps and IP space!)

• Power to chemicals

• Green aspects

Disruptive technology / game changer

C&EN 2017, 23-25 (March 13th)

Page 4: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Why higher organic molecules

• Reduction of CO2 only to CO cost efficient

• Electro-conversion to larger molecules (value-added)

Page 5: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electroorganic synthesis

Folie Nr. 7

electroorganic

synthesis

reagents:

e.g. oxidizer

classical synthesis

no reagent waste

0.06 € per mole

(2F@3V in Germany)

Page 6: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electroorganic synthesis

Folie Nr. 8

oxidation

reduction

radical reactions

radical sequences

generated bases

Challenges:

accumulation of product

control following up reactions

reversibility

Page 7: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electroorganic synthesis

ANOD E

+

substrate

intermediate intermediate‘ intermediate‘‘

product

Electrode material: inert/electrocatalysis potential over-potential

Electrolyte: supporting electrolyte ionic strength solvation temperature convection, flow …

Current density

Org. Process Res. Dev. 2016, 20, 26-32.

Page 8: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Screening with product-driven criteria

• Electrode materials (10 different usually, >50 in stock)

• Electrolyte combinations (set of 5-8 tested, >200 possible)

• Product portfolio: GC/GC-MS or LC/LC-MS

• Divided/undivided cells

• Optimization:

- current density

- applied charge

- temperature

- separator material

(> 20 available)

- mediators

Org. Process Res. Dev. 2016, 20, 26-32.

Page 9: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electrolysis cells (selection)

Screening: 1-4 mL

Small scale: 30-200 mL

Up-scaling to 1700 mL

Page 10: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Challenge: anodic cross-coupling reaction

Electrochemical potential as strong selector

Oxidation potential and nucleophilicity correlated

Potential solutions:

T. Morofuji, A. Shimizu, J. Yoshida, Angew. Chem. Int. Ed. 2012, 51, 7259.

● Separation of oxidation and coupling event: Cation-pool method

● Over stoichiometric amount of reagents: Hypervalent iodine reagents

→ Mostly not compatible with phenols.

→ Novel concept by electrolytes required!

Page 11: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

HFIP as electrolyte

A. Berkessel et al. J. Am. Chem. Soc. 2006, 128, 8421.

L. Eberson et al. Angew. Chem. Int. Ed. 1995, 34, 2268; J. Chem. Soc., Perkin Trans. II 1995, 1735.

Electrochim. Acta, 2012, 62, 372.

ACS Catal. 2017, 7, 1846.

• Large electrochemical window

• Strong H-bonding donor

• Phase separation on nano-scale

• H-bonding network in solid state

• Increases half-life of spin centers dramatically

Page 12: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Decoupling of nucleophilicity and oxidation potential

electron rich • easy to oxidize

• less nucleophilic

electrophilic

solvate based

explains cross-coupling

14

A

A+•

B

B

less electron rich

nucleophilic coupling

Page 13: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Next level

Product Selectivity in HFIP/MeOH

Yield HFIP/MeOH

>100:1 50%

>100:1 36%

>100:1 61%

>100:1 63%

Angew. Chem. Int. Ed. 2014, 53, 5210-5213.

Page 14: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Merit of electrosynthesis (application)

Angew. Chem. Int. Ed. 2014, 53, 5210-5213.

Shortcut of 5-6 steps!

Page 15: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Phenol-phenol cross-coupling

Metal-free and reagent-free cross-coupling!

Angew. Chem. Int. Ed. 2014, 53, 5210-5213.

(VIP manuscript)

Highlighted in C&EN April 7, 2014, 34.

Highlighted in ChemCatChem 2014, 6, 2792-2795.

Page 16: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Partially protected biphenols

Partially protected non-symmetric biphenols:

• Selective modification of hydroxy groups

• Control of reactivity and selectivity of

desired ligands / catalysts

• Non-symmetric catalysis products via non-

symmetric ligands

Challenge for conventional synthesis:

Selective protection of chemically similar

hydroxy groups

Page 17: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Partially protected biphenols: Conventional synthesis

R. Francke, R. Reingruber, D. Schollmeyer, S. R. Waldvogel, J. Agric. Food. Chem. 2013, 61, 4709-4714.

Partial demethylation of protected biphenols with strong Lewis acids:

Partial protection of non-protected biphenols:

N. Nishimura, K. Yoza, K. Kobayashi, J. Am. Chem. Soc. 2010, 132, 777-790.

Page 18: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Protection of phenols as silyl ethers

• First direct synthesis of ABPG not viable by conventional chemical methods

• No deblocking while coupling reaction, high yields, and selectivity!

• Broad scope (synthetic scale ~ 2 g product)

Selection out of >40 screened substrate combinations

Page 19: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Up-scaling of anodic cross-coupling

Scale-up: 25 mL 200 mL beaker-type cell

8-fold reaction size

• No drop in yield: 84%

• Improved ratio of A:BTIPS: 1:3 1:2

• Selective coupling-reaction:

Improved work-up via short-path distillation

1,5 g ABTIPS 12,5 g ABTIPS

Page 20: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

• Protecting group leads to torsion angle >60°, aryl moiety turns in EWG

• Improved yields and selectivity for partially protected biphenols

• Broadened substrate scope when using protection groups

• Very good yields up to 92%

• High selectivity: ≥100:1

Rationale

22 Angew. Chem. Int. Ed. 2016, 55, 11801–11805. (VIP and front cover)

Page 21: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Motivation – Using waste streams of pulping

cellulose

Kraft process

waste

lignin hemicellusose tall oil turpentine fraction

wood

Page 22: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Lignin

• Wood as superior renewable (no competition

with nutrition purposes)

• „Waste“ mostly serve for energy production

• Lignin is a side product of the Kraft process and

the most abundant, renewable source for

aromatic compounds (1 mio t/a // 70-100 mio t/a)

Page 23: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Lignin

• Partial use of waste stream as a feedstock

• Work-up concept should be cost efficient

Anodic treatment

Most scientist ignore down stream processing!

Page 24: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electrochemical degradation of lignin

Goals:

- Selective formation of aromatic compounds

- Mild reaction conditions

- Highly selective formation of phenol derivatives

Challenges:

- Selective conversion → low yield but value-added

- Non-selective degradation → very complex mixture

26

Anodic cleavage

Vanillin

Acetovanillone

Guaiacol

Page 25: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electrochemical degradation of lignin

Known conversions:[1]

27

*Based on used Kraft lignin

[1] C. Z. Smith, J. H. P. Utley, J. Hammond, J. Appl. Electrochem. 2011, 41, 363-375.

• Direct electrochemical oxidation

Yields up to 6 wt%*

• Classic oxidants

Toxic by-products

Problem: Very drastic conditions

T >150°C

p ~ 5 bar (autoclave!)

Strongly basic media

Our approach:

T <100°C

Ambient pressure

Weakly alkaline media

Challenge: anode corrosion!

Page 26: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Chemical background

Lignin conversion:

- inexpensive media

- electrocatalysis

- simple anodes

Initial conditions (2010):

• 3M NaOH, 80 °C

• current density: j = 0.68 mA/cm2

Page 27: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Nickel anodes

• Aromatic compounds already

in lignin

• Strong enrichment of vanillin

After electrolysis at Ni/Ni

Lignin upon dissolving in NaOH

Page 28: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Silver versus Nickel

• Ag and Ni as anodic materials

represent the key

• selective formation of vanillin

• minor components only in

traces

Electrolysis at Ag ║Ni

Electrolysis at Ni ║Ni

Page 29: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

The anode will be the key

• up to 2.84% vanillin for electrolysis run

• highly selective formation of vanillin

• silver prone to corrosion

Yield

Nr. Anode Cathode Electrolyte Q [C g-1] V [%]* AV [%]* VS [%]*

1 Ag Ni 3 M NaOH 2703 1.20 0.66 0.21

2 Ni Ni 1 M NaOH 2662 1.03 0.11 -

3 Ni Ni 2 M KOH 2688 1.36 0.16 -

4 NiOOH NiOOH 3 M NaOH 2688 1.24 0.20 -

5 Ag/Ni Ni 1 M NaOH 2692 2.84 0.04 -

6 Monel Monel 3 M NaOH 2688 2.15 0.25 -

Page 30: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Nickel basis

Cobalt basis

0

0,5

1

1,5

2

2,5

3

3,5

Yie

ld o

f va

nill

in /

wt%

*

Influence of the base concentration on the yield of vanillin

Vanillinausbeuten (1 M NaOH)

Vanillinausbeuten (2 M NaOH)

Vanillinausbeuten (3 M NaOH)

Electrochemical degradation of lignin

• Important influence of the anode material

Materials with high stability against corrosion

* Based on used Kraft lignin

Yield >3 wt%* for electrolysis run

Yield (1 M NaOH)

Yield (2 M NaOH)

Yield (3 M NaOH)

Beil. J. Org. Chem. 2015, 11, 473-480.

Page 31: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electrochemical degradation of lignin

- Current density strongly enhanced (only 5% of electrolysis time)

- 3D electrode / cell design

- Inexpensive electrode (Ni/P alloy)

- Stable in black liquor

Nickel foam electrodes:

Beil. J. Org. Chem. 2015, 11, 473-480.

Page 32: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electrochemical degradation of lignin/black liquor

34

• Highly selective reaction

• Vanillin and acetovanillone are the predominant products which can be observed by

gaschromatic methods

time / min

time / min

Inte

nsi

ty

Inte

nsi

ty

Gaschromatogram of the lignin/BL

components prior electrolysis

Highly selective enrichment of

vanillin due to electrochemical

treatment

Page 33: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Electrochemical degradation of lignin

• Optimization of the anode material allows:

– Yields up to 3 wt% under mild conditions

– High stability against corrosion

– Highly selective formation of vanillin

Large amount of unreacted lignin remains!

Challenges:

• Enhanced degradation of lignin

• Recovery of the reaction products without complete

neutralization of the solution

Page 34: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Work-up concept

electrolysis

adsorption

next cycle

Solution: Solid phase extraction of „endangered“ products!

• allows multiple cycles of electrolysis and extraction

• new application for strongly basic anion exchange resins

• The aim is a partial degradation of the applied lignin

Page 35: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Work-up concept

• direct adsorption from

electrolyte/alkaline solution

• no loss

• easy regeneration of ion exchange

resin

• lignin particles remain unaffected

(size exclusion)

Adsorption via ion exchange resin

Beil. J. Org. Chem. 2015, 11, 473-480.

Page 36: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Ion exchange resins

Ion exchange resins work on a broad range of alkaline media:

interactions: • Coulomb • van der Waals • p,p interactions

Page 37: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Ion exchange resins

Folie Nr. 39

Dowex Monosphere 550a OH

quatenary ammonium functionalities stable polystyrene backbone up to 90% vanillin adsorption from alkaline solution but: low adsorbate-adsorbent ratio < 0.05 (ratio for technical purposes ~ 0.20)

Page 38: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Raw material black liquor

• lignin-containing liquor from Kraft process

• black liquor contains aromatic compounds: vanillin, guaiacol, acetovanillone

• 3 mg/mL aromatic compounds in black liquor

• possible loss due to over-oxidation during electrolysis

• project: adsorption of aromatic compounds before and after electrolytic

lignin degradation

• application of Dowex Monosphere 550a OH to black liquor:

adsorption of up to 74% aromatic phenols

Black liquor

D. Schmitt, N. Beiser, C. Regenbrecht, M. Zirbes, S. R. Waldvogel, Sep. Purif. Technol. 2017, 181, 8–17.

Page 39: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Adsorption from black liquor

• Adsorption enables easy access to four phenol derivatives

• Controlled release of adsorbed phenols by acidic treatment

• Complete depletion of black liquor regarding its content of low molecular phenols

• Anion exchange resin can be regenerated and reused

Time / min

Int.

Vanillin

Acetovanillone

Guaiacol

4,4‘-Dihydroxy-3,3‘-dimethoxy

stilbene

Total Yield of phenols up to 1.6 mg∙mL−1 black liquor

D. Schmitt, N. Beiser, C. Regenbrecht, M. Zirbes, S. R. Waldvogel, Sep. Purif. Technol. 2017, 181, 8–17.

Page 40: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Combined process of adsorption and anodic oxidation

• Electrochemical degradation of lignin in completely depleted black liquor?

Int.

ISTD

ISTD

Int.

time [min]

vanillin

acetovanillone

Successful anodic degradation of lignin in depleted black liquor!

Composition of completely

depleted black liquor

Composition of completely

depleted black liquor after

anodic oxidation

D. Schmitt, C. Regenbrecht, M. Schubert, D. Schollmeyer, S. R. Waldvogel, Holzforschung 2017, 71, 35–41.

Page 41: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Combined process of adsorption and anodic oxidation

• Combined process enables a drastic increase of the vanillin yield

Maximization of the total yield of phenols from 1.6 mg∙mL−1 up to 1.9

mg∙mL−1 by combination of adsorption and anodic degradation!

Yield

[mg∙mL−1]

adsorption anodic

oxidation

combined

yield

process step

guaiacol

vanillin

acetovanillone

4,4‘-dihydroxy-3,3‘-dimethoxy stilbene

D. Schmitt, N. Beiser, C. Regenbrecht, M. Zirbes, S. R. Waldvogel, Sep. Purif. Technol. 2017, 181, 8–17.

D. Schmitt, C. Regenbrecht, M. Schubert, D. Schollmeyer, S. R. Waldvogel, Holzforschung 2017, 71, 35–41.

Page 42: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Summary

Folie Nr. 44

• Electroorganic synthesis is a useful and versatile tool

• Reagent and metal-free coupling

• Lignin degradation at Ni based alloys

• Compatible with lack liquor

• Utility - workup is crucial

Page 43: Electrosynthesis - sustainable and disruptive · Electroorganic synthesis A N O D E + substrate intermediate intermediate‘ intermediate‘‘ product Electrode material: inert/electrocatalysis

Acknowledgement

Waldvogel group, August 2017

Prof. Dr. Robert Francke

(Evonik)