elastollan - wcms portal polyurethanes · pdf fileautomotive elastollan meets stringent...

Elastollan®Thermoplastic Polyurethane Elastomers

Perfect Fit for Versatile Applications

BASF Polyurethanes Asia Pacific Regional Headquarter

BASF East Asia Regional Headquarters Ltd45/F, Jardine House, No.1 Connaught Place, Central, Hong KongTel : +852 2731 0111 Fax : +852 2731 5636

Greater China Region BASF Polyurethane Specialties (China) Co Ltd2333 Gang Cheng Road, Pudong, Shanghai, 200137, P.R. ChinaTel : +86-21 3865 2000 Fax : +86-21 3865 5516

Asia Pacific Region BASF Polyurethanes Australia Pty LtdKororoit Creek Road, Altona 3018, AustraliaTel : +61-3 9281 6300 Fax : +61-3 9281 6366

BASF Polyurethanes India Ltd17-18, Kailash Enclave, 3rd floor, Lala Lajpatrai Road, New Delhi, Delhi,110048, IndiaTel : +91-11 4159 6443 Fax : +91-11 4159 6496

PT BASF IndonesiaPlaza GRI, 10th & 11th Floor, JI. HR Rasuna Said Bl. X2/1, Jakarta, 12950, IndonesiaTel : +62-21 526 2481 Fax : +62-21 526 2533

BASF Japan Ltd1-23-2, Kasumi Yokkaichi-shin, 510-011, JapanTel : +81-593 66 7506 Fax : +81-593 66 7538

BASF Company Ltd14/F, KCCI Bldg, 45, 4-ga, Namdaemunro, Jung-gu, Seoul, Korea, 100-743Tel : +82-2 3707 3100 Fax : +82-2 3707 7807

BASF Polyurethanes (Malaysia) Sdn BhdNo.2, Jalan U8/87, Seksyen U8, Bukit Jelutong, 40706 Shah Alam, Selangor Darul Ehsan, MalaysiaTel : +60-3 7847 3196-7 Fax : +60-3 7847 3192

BASF Chemicals & Polymers Pakistan (Pvt) Ltd46-A, Block-6, P.E.C.H.S., Karachi, 75400, PakistanTel : +92-21 431 4084 Fax : +92-21 431 4085

BASF Singapore Pte Ltd7 Temasek Boulevard, #35-01 Suntec Tower One, Singapore, 038987Tel : +65 6398 5000 Fax : +65 6430 9883

BASF Polyurethanes (Thailand) Ltd308/1 Moo 4 Soi 5, Bangpoo Industrial Estate, Sukhumvit Road, Preakasa, Muang, Samutprakarn, 10280, Thailand Tel : +66 2324 0518 Fax : +66 2324 0290

BASF Singapore Pte Ltd HCMC Representative OfficeSaigon Trade Center, #1701-1711, 37 Ton Duc Thang Street, Dist. 1, Ho Chi Minh CityTel : +84-8 824 3833 Fax : +84-8 824 3832

Shinshiro, JapanYokkaichi

Netherland

Qingtao

TDI/MDI

PO

BASF Polyurethanes Worldwide Network Map

AUTOMOTIVE

ELECTRICAL & ELECTRONICS

MECHANICAL ENGINEERING

SPORTS & LEISURE

FOOTWEAR

OTHERS

Physical Properties Unit DIN ISO C 60 A HPM

C 65 A HPM

C 70 A HPM

C 75 AHPM

C 85 AHPM

C 78 A C 80 A C 85 A C 88 A C 90 A C 95 A C 98 A C 59 D C 60 D C 64 D C 74 D

HardnessShore A

53505 86860 65 70 75 85 80 82 87 88 93 96

52 57 60 63 73Shore D 36 37 41 47

Density g/cm3DIN EN

ISO 1183-1-A1.19 1.19 1.17 1.20 1.23 1.18 1.19 1.19 1.19 1.20 1.21 1.22 1.23 1.23 1.24 1.25

Tensile StrengthMPa

53504 37

40 40 45 50 50 50 50 50 50 55 55 50 50 50 45 45

After 21 days storage in water at 80ºC 25 25 30 35 35 35 35 38 38 40 40 40 43 43 43 45

Elongation at Break%

800 800 750 700 650 650 650 650 600 550 550 550 500 450 400 350


Stress at 20% Elongation

MPa

1.5 1.5 1.5 2.0 3.5 2.0 2.5 3.0 3.5 7.0 8.0 11 12 16 17 28

Stress at 100% Elongation 2.0 2.0 2.5 3.5 6.0 4.0 4.5 5.5 6.0 9.0 11 14 17 20 24 30

Stress at 300% Elongation 4 4 4.5 6 11 7.5 8.5 9.5 13 15 22 26 30 35 35 35

Modulus of Elasticity - Tensile Test MPa DIN EN ISO 527 160 250 330 390 730

Tear Strength kN/m DIN ISO 34-1/B/b 40 40 40 45 70 60 65 70 75 95 120 130 160 180 200 240

Abrasion Loss mm3 53516 4649 40 40 35 35 40 30 30 30 30 25 25 30 20 20 20 20

Compression Set at 23ºC% DIN ISO 815

20 20 15 15 15 25 25 25 25 25 30 30 30 40 40 40

Compression Set at 70ºC 30 30 25 25 25 35 35 35 40 40 45 50 50 50 55 60

Notched impact strength (Charpy) 23ºCkJ/m2 DIN EN ISO 179

No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break

Notched impact strength (Charpy)-30ºC No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break 25 12 8 7 4

Flammabilty Rating UL 94 HB HB HB HB

AUTOMOTIVE Elastollan meets stringent requirements for the automotive industry. Whether in terms of Aesthetics, Performance, or Function, it should help enhance driving pleasure

Automotive interiors with Elastollan surfaces stimulates the senses, Conveying the designer’s message, achieving perfection be it luxury or sophistication. These interiors has the right touch, looks like work of art yet tough enough to withstand the weathering, not to mention cosmetics, fingernails and just about everything a kid or an adult might do in car.

NVH components, have to perform consistently under dynamic load. Oil and Ozone resistance , coupled with high tear strength, low compression set makes Elastollan one of the better substitutions for rubber.

Physical Properties Unit DIN ISO 1170 A 1175 AW

1180 A 1185 A W

1185 A 1185 AM

1185 A WM

1185 AFHF

1190 A 1195 A 1198 A 1154 D 1154 DFHF

1160 D 1164 D 1174 D

HardnessShore A

53505 86870 75 80 83 87 88 87 89 92 96

Shore D 36 39 39 37 42 48 52 53 58 60 64 73

Density g/cm3 DIN EN ISO 1183-1-A

1.14 1.14 1.11 1.16 1.12 1.11 1.15 1.23 1.14 1.15 1.16 1.17 1.27 1.18 1.18 1.20

Tensile StrengthMPa

53504 37

35 40 45 40 45 45 35 35 50 55 50 50 30 50 50 50


Elongation at BreakAfter 21 days storage in water at 80ºC

%800 700 650 700 600 600 600 600 550 500 450 450 400 400 350 300

850 750 700 700 600 650 600 600 600 500 450 450 400 450 400 400


MPa

2.0 2.0 2.0 2.5 2.5 3.5 4.0 3.5 4.5 6.0 9.0 11 13 13 16 25

Stress at 100% Elongation 4.0 4.0 4.5 6.0 6.0 7.0 7.0 8.0 8.5 10 15 17 19 19 25 30

Stress at 300% Elongation 8 8 8 8 10 12 13 13 16 18 28 38 33 41 45 45

Modulus of Elasticity - Tensile Test MPa DIN EN ISO 527 150 160 200 250 560

Tear Strength kN/m DIN ISO 34-1/B/b 40 40 55 50 70 60 55 60 85 100 125 150 110 170 190 220

Abrasion Loss mm3 53516 4649 45 45 30 40 25 60 38 35 25 25 25 20 30 20 20 20


20 20 25 20 25 35 20 25 25 30 35 40 30 40 40 40

Compression Set at 70ºC 40 40 45 35 45 45 35 45 45 45 50 50 45 50 50 55


No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break 50 No Break No Break No Break

Notched impact strength (Charpy)-30ºC No Break No Break No Break No Break No Break No Break No Break 120 No Break No Break 190 18 3 16 12 5

Flammabilty Rating UL 94 V0/V2 HB V2 HB VO HB V0/V2 HB

ELECTRICAL & ELECTRONICS Electricity was definitely a great discovery for mankind, it will be hard to imagine our world today without electricity.

Produced with halogen free flame retardant, it is no wonder that Elastollan is seen on cables and wires used in all forms of Electricity, for electrical power, electronic signals, electromagnetic devices.

Cables for industrial robots depend on Elastollan cable sheathing to ensure continuous operations. Automation signal cables and plugs are protected with Elastollan, thus always sending the right signals under extremely challenging environment.

MECHANICAL ENGINEERING

Physical Properties Unit DIN ISO S 60 AWH

S 70 A WH

S 80 A S 85 A S 90 A S 95 A S 98 A S 60 D S 64 D S 74 D

Hardness Shore A53505 868

60 68 81 85 93 96

Shore D 41 48 55 60 64 75

Density g/cm3 DIN EN ISO 1183-1-A 1.19 1.20 1.22 1.23 1.24 1.24 1.25 1.25 1.26 1.26

Tensile StrengthMPa

53504 37

30 30 50 55 55 50 45 45 45 40

After 21 days storage in water at 80ºC


800 850 750 650 600 550 500 500 450 300

After 21 days storage in water at 80ºC


MPa

1.0 1.2 2.0 2.5 2.5 3.5 4.0 3.5 4.5 6.0

Stress at 100% Elongation 4.0 4.0 4.5 6.0 6.0 7.0 7.0 8.0 8.5 10.0

Stress at 300% Elongation 8.0 8.0 8.0 8.0 10.0 12.0 13.0 13.0 16.0 18.0

Modulus of Elasticity - Tensile Test MPa DIN EN ISO 527

Tear Strength kN/m DIN ISO 34-1/B/b 40 40 55 50 70 60 55 60 85 100

Abrasion Loss mm3 53516 4649 45 45 30 40 25 60 38 35 25 25


20 20 25 20 25 35 20 25 25 30

Compression Set at 70ºC 40 40 45 35 45 45 35 45 45 45


No Break No Break No Break No Break No Break No Break No Break No Break No Break No Break

Notched impact strength (Charpy)-30ºC No Break No Break No Break No Break No Break No Break No Break 120 No Break No Break

Flammabilty Rating UL 94 HB

From the tiny, millimeter sized, high precision transmission cogs of a power drill or lengths of pneumatic tubes, transmission belts, conveying belts. The engineering application possibilities for Elastollan® are virtually unlimited, all these applications have one important requirement - Strong resistance to Wear & Tear.

Elastollan is resistant to a wide variety of industrial oils and grease, alkali and acids, and just about every type of industrial chemicals. It resistance to microbes, safe contact with foodstuff and potable water m akes it a suitable material for all seasons.

Elastollan can be combined with various engineering plastics to create new possibilities for new products.

Handles, for example for power tools, are given a better feel and become less easily soiled, with soft, scratchproof coverings of Elastollan.

SPORTS & LEISURE

Physical Properties Unit DIN ISO B 60 A B 60 A B 80 A B 85 A B 90 A B 95 A B 98 A B 60 D B 64 D

WHA ESD

HardnessShore A

53505 86860 65 82 83 91 96

Shore D 42 48 50 60 64

Density g/cm3 DIN EN ISO 1183-1-A 1.17 1.17 1.19 1.20 1.21 1.22 1.22 1.23 1.24

Tensile StrengthMPa

53504 37

35 20 50 55 55 55 55 55 55

After 21 days storage in water at 80ºC 20 20 40 40 40 40 40 40 40


900 800 600 600 550 550 500 500 450

After 21 days storage in water at 80ºC 1000 900 600 600 550 500 500 450 400


MPa

1.0 1.0 2.0 2.0 4.0 7.0 8.0 13.0 17.0

Stress at 100% Elongation 2.5 2.5 5.0 4.0 7.0 10.0 12.0 16.0 19.0

Stress at 300% Elongation 6.5 6.5 14.5 15 20 22 30 30 35

Modulus of Elasticity - Tensile Test MPa DIN EN ISO 527 140 240 320

Tear Strength kN/m DIN ISO 34-1/B/b 50 40 85 75 90 100 130 150 180

Abrasion Loss mm3 53516 4649 40 120 35 35 30 30 25 25 25


20 20 20 25 25 30 35 35 35

Compression Set at 70ºC 30 30 30 35 40 40 45 45 50


No Break No Break No Break No Break No Break No Break No Break No Break No Break

Notched impact strength (Charpy)-30ºC No Break No Break No Break No Break No Break 200 18 10 8

Sports articles which are subjected to low temperature are high stress load depend on Elastollan’s consistant proven performance. Under sub zero temperatures, ski boots and ski googles have to stay strong and flexible.

Protective equipment for a wide variety of outdoor sports (football, baseball) as well as extreme sports depend on Elastollan to protect from heavy impact, thus avoiding injuries to the athletes.

Besides, fulfilling the needs for demanding sports, Elastollan can be used for our daily leisure as well, substituting metal for zippers, or simply substituting hard plastics for making buttons for the garment industries.

FOOTWEAR

Physical Properties Unit DIN ISO 670 AWHU

685 AU

690 AU

695 AU

660 DU

664 DU

670 DU

Hardness Shore A53505 868

70 86 90

Shore D 50 60 65 70

Density g/cm3 DIN EN ISO 1183-1-A 1.19 1.21 1.21 1.21 1.23 1.23 1.23

Tensile StrengthMPa

53504 37

35 50 50 50 50 40 40

After 21 days storage in water at 80ºC 30 40 40 40 40 40 40


650 600 550 500 400 350 300

After 21 days storage in water at 80ºC 700 650 600 550 450 400 350


MPa

1.0 2.8 4.0 6.0 8.0 12.0 18.0

Stress at 100% Elongation 3.0 5.5 7.0 10.0 14.0 20.0 28.0


Modulus of Elasticity - Tensile Test MPa DIN EN ISO 527 120 130 140

Tear Strength kN/m DIN ISO 34-1/B/b 40 75 85 100 40 30 30

Abrasion Loss mm3 53516 4649 40 40 40 40 30 35 35


25 25 25 25 40 40 40

Compression Set at 70ºC 40 45 45 40 40 40 40


No Break No Break No Break No Break No Break No Break No Break

Notched impact strength (Charpy)-30ºC No Break No Break No Break 200 7 9 12

Yellowness Index UL 94 < 15 < 15 < 15 < 15 < 15 < 15 < 15

Elastollan’s wide portfolio of products caters for customer’s ever changing needs in redefining footwear technology, to some extend, driven by design beyond function.

With our multi talented Elastollan - UV stabilized, transparent, excellent abrasion resistance, flexibility at low temperatures, soft plasticizer free. It is not surprising that our footprint is all over in the industry, may it be golf, running, soccer or safety shoes.

Elastollan meets stringent requirements for non toxic materials.

Legal Disclaimer

® = registered trademark of BASF and Elastogran GmbHThe information submitted in this publication is based on our current knowledge and experience. In view of the many factors that may affect processing and application, these data do not relieve processors from the responsibility of carrying out their own tests and experiments; neither do they imply and legally binding (assurance) of certain properties of suitability for a specific purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.

OTHER

Sorter for Potato Harvesting Machines

Soft Touch Grip for Camera Flash

Livestock Identification Tags

Binoculars Casing

Breathable for Bedding Cover

Elastic Fibers for Garments

elastollan - wcms portal polyurethanes · pdf fileautomotive elastollan meets stringent...

Documents