Project: EDC Land RigPrepared by: Hamed Mosbah - Jotun Coatings

Cons/Eng: 1 Date: 7/16/2012Client: EDC Sub contr:

Technical specificationEDC Land Rigs

EPC:

Page 1 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

8.8 TU 24 h * 10 h * 4 h * 17 0

8.8 TU 24 h * 10 h * 4 h * 17 0

10 TU 10 h * 5 h * 2,5 h * 10 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible

35

26

HARDTOP AS, COLOUR

1 h

100 P

NR

P

P

230

JOTAMASTIC 80, GREY 80 90 113 P

4 h

Flash Point C

50 50

Dry spec. Wet spec. Brush Roller

JOTAMASTIC 80, RED 80 90 113 P

Surface Prep. Loose paint and heavy corrosion to be removed by scraping. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Corroded and damaged areas to be power-tool cleaned to St. 3 (ISO 8501-1:2007). Edges to intact paint system to be feathered.

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner10C 23C 40C

Substrate Mild steel Area No. 1

Location Date 7/1/2012

Position 2R ISO 12944-2 category N/A

Customer Approved by Version 1Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Application RestrictionRecommended Pot life

0 h

Nozzle Orifice Nozzle PressureMin C Max C

JOTAMASTIC 80, RED 150 bar 2 h 10 5010 min

Dry to touch 23 C

35

JOTAMASTIC 80, GREY 150 bar 2 h 10

.017" - .023"23 C

7A : 1B

Induction Time

Mixing Ratio

Volume

10 min 50

HARDTOP AS, COLOUR 150 bar 4 h 0 50

.017" - .023"

.013" - .018"

7A : 1B

4A : 1B

Product Application Methods

Spray

R

R

R

4 h

Product

Page 2 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

10.6 FC 2 h * 1,5 h * 40 min * 17 0

5.3 FC 24 h * 10 h * 4 h * 17 0

10 FC 10 h * 5 h * 2,5 h * 10 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible

1/2 h

50

.013" - .018" 150 bar 4 h 1 h 50

4 h 35 10

HARDTOP AS, COLOUR

50

JOTAMASTIC 80, GREY .017" - .023" 150 bar 2 h

Max C10 min 25 5

Min CBARRIER 77, GREY .015" - .021" 150 bar 24 h

4A : 1B 26 00

P

P

250

HARDTOP AS, COLOUR

3A : 1B

10 min

P

Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C

50 50 100 P

JOTAMASTIC 80, GREY 80 150 188

Dry spec. Wet spec.

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Brush Roller

BARRIER 77, GREY 53 50 94 P NR

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner10C 23C 40C

Substrate Mild steel Area 1 No. 2

1Location Date 7/1/2012

Position 2B ISO 12944-2 category N/A

EDC Land Rig Prepared by Hamed Mosbah - Jotun CoatingsCustomer Approved by Version

7A : 1B

R

R

R

Product Recommended Pot life Dry to touch 23 C Induction Time

Mixing Ratio

Volume

Product Application Methods

Spray

Project

Page 3 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

10 TU 24 h * 10 h * 4 h * 17 0

10 TU 24 h * 10 h * 4 h * 17 0

10 TU 24 h * 10 h * 4 h * 17 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible

50

150 bar 4 h 0 h 4A : 1B

4 h 35 10

HARDTOP AS, COLOUR .013" - .018"

50

150 bar 2 h 10 min 7A : 1B

Max C

150 bar 2 h 10 min 7A : 1B

Nozzle Orifice Nozzle Pressure

23 C

JOTAMASTIC 80, GREY .017" - .023"

Application Restriction

4 h 35 10

Recommended Dry to touch 23 C Flash Point C

Product Induction Time

Mixing Ratio

Volume

240

JOTAMASTIC 80,GREY

Pot life

Min C

JOTAMASTIC 80, RED .017" - .023"

80 80 100 P

NR

P

R

R

R P

JOTAMASTIC 80,GREY 80 80 100 P

Spray

JOTAMASTIC 80,RED 80 80 100 P

23C 40CDry spec. Wet spec. Brush Roller

Surface Prep. Loose paint and heavy corrosion to be removed by scraping. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Corroded and damaged areas to be power-tool cleaned to St. 3 (ISO 8501-1:2007). Edges to intact paint system to be feathered.

Type of coat Vol. solids % Filmthickness (m) Recoating intervals ThinnerProduct Application Methods10C

Substrate Mild steel Area 1 No. 3

1Location Date 7/1/2012

Position 3R ISO 12944-2 category N/A

Customer Approved by VersionProject EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

1 h 26 0 50

Page 4 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

10.6 FC 2 h * 1,5 h * 40 min * 17 0

5.3 FC 24 h * 10 h * 4 h * 17 0

10 FC 10 h * 5 h * 2,5 h * 10 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible

Flash Point C

Application Restriction

Nozzle Orifice

Pot life Induction Time

Mixing Ratio

Volume

Dry to touch 23 C

250

HARDTOP AS, COLOUR

Product Recommended

P

P

R

R

R P50 50 100

JOTAMASTIC 80, GREY 80 150 188 P

Dry spec. Wet spec. Brush Roller

BARRIER 77, GREY 53 50 94 P NR

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner10C 23C 40C

Position 3B ISO 12944-2 category N/ASubstrate Mild steel Area 1 No. 4

Version 1Location Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Nozzle Pressure

23 CMin C Max C

BARRIER 77, GREY .015" - .021" 150 bar 24 h 1/2 h 3A : 1B 10 min 25 5 50

JOTAMASTIC 80, GREY .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

HARDTOP AS, COLOUR .013" - .018" 150 bar 4 h 0 4A : 1B 1 h 26 0 50

Page 5 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.6 TU 2 h * 1,5 h * 1 h * 7 0

8.5 TU 4 h * 2 h * 1,5 h * 7 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible140

Product Recommended Application Restriction

Min C Max C

NR

PIONER TC, COLOUR 34 40 118 P P

PILOT QD PRIMER, GREY R

R

56 100 179 P

10C 23C 40CDry spec. Wet spec. Brush Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Welding seams and areas with damaged shopprimer to be power-tool cleaned to St. 3 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 4R ISO 12944-2 category N/ASubstrate Mild steel Area 1 No. 5

Location Date 7/1/2012Version 1Customer Approved by

Product Application Methods

Spray

Project EDC Land Rig Prepared by

Pot life Induction Time

Mixing Ratio

Volume

Dry to touch 23 C Flash Point C Nozzle Orifice Nozzle Pressure

23 C

Hamed Mosbah - Jotun Coatings

PILOT QD PRIMER, GREY .015" - .021" 150 bar NA NA NA 15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA NA 30 min 37 5 50

Page 6 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.6 FC 2 h * 1,5 h * 1 h * 7 0

8.5 FC 4 h * 2 h * 1,5 h * 7 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible

R

R

140

Product Recommended Pot life

Wet spec. Brush

NR

PIONER TC, COLOUR 34 40 118 P P

PILOT QD PRIMER, GREY

Recoating intervals Thinner

56 100 179 P

10C 23C 40CDry spec.

Area 1

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m)

No. 6

Date 7/1/2012

Position 4B ISO 12944-2 category N/ASubstrate Mild steel

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by Version 1

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max C

Induction Time

Mixing Ratio

VolumePILOT QD PRIMER, GREY .015" - .021" 150 bar NA NA NA 15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA NA 30 min 37 5 50

Page 7 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.6 TU 2 h * 1,5 h * 1 h * 7 0

8.5 TU 4 h * 2 h * 1,5 h * 7 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible140

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

NR

PIONER TC, COLOUR 34 40 118 P P

PILOT QD PRIMER, GREY R

R

56 100 179 P

10C 23C 40CDry spec. Wet spec. Brush

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Welding seams and areas with damaged shopprimer to be power-tool cleaned to St. 3 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 5R ISO 12944-2 category N/ASubstrate Mild steel Area 1

Version 1

No. 7

Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CPILOT QD PRIMER, GREY .015" - .021" 150 bar NA NA NA 15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA NA 30 min 37 5 50

Page 8 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.6 FC 2 h * 1,5 h * 1 h * 7 0

8.5 FC 4 h * 2 h * 1,5 h * 7 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible140

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

NR

PIONER TC, COLOUR 34 40 118 P P

PILOT QD PRIMER, GREY R

R

56 100 179 P

10C 23C 40CDry spec. Wet spec. Brush

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 5B ISO 12944-2 category N/ASubstrate Mild steel Area 1

Version 1

No. 8

Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CPILOT QD PRIMER, GREY .015" - .021" 150 bar NA NA NA 15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA NA 30 min 37 5 50

Page 9 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.6 TU 2 h * 1,5 h * 1 h * 7 0

8.5 TU 4 h * 2 h * 1,5 h * 7 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible140

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

NR

PIONER TC, COLOUR 34 40 118 P P

PILOT QD PRIMER, GREY R

R

56 100 179 P

10C 23C 40CDry spec. Wet spec. Brush

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Welding seams and areas with damaged shopprimer to be power-tool cleaned to St. 3 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 6R ISO 12944-2 category N/ASubstrate Mild steel Area 1

Version 1

No. 9

Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CPILOT QD PRIMER, GREY .015" - .021" 150 bar NA NA NA 15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA NA 30 min 37 5 50

Page 10 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.6 FC 2 h * 1,5 h * 1 h * 7 0

8.5 FC 4 h * 2 h * 1,5 h * 7 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible140

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

NR

PIONER TC, COLOUR 34 40 118 P P

PILOT QD PRIMER, GREY R

R

56 100 179 P

10C 23C 40CDry spec. Wet spec. Brush

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 6B ISO 12944-2 category N/ASubstrate Mild steel Area 1

Version 1

No. 10

Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CPILOT QD PRIMER, GREY .015" - .021" 150 bar NA NA NA 15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA NA 30 min 37 5 50

Page 11 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

8.8 TU 24 h * 10 h * 4 h * 17 0

8.8 TU 24 h * 10 h * 4 h * 17 0

10 TU 10 h * 5 h * 2,5 h * 10 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible

NR

P

230

HARDTOP AS, COLOUR 50 50 100 P

R

R

R P

Roller

JOTAMASTIC 80, GREY 80 90 113 P

Dry spec. Wet spec. Brush

JOTAMASTIC 80, RED 80 90 113 P

Surface Prep. Loose paint and heavy corrosion to be removed by scraping. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Corroded and damaged areas to be power-tool cleaned to St. 3 (ISO 8501-1:2007). Edges to intact paint system to be feathered.

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner10C 23C 40C

Position 7R ISO 12944-2 category N/ASubstrate Mild steel Area 1 No. 11

Version 1Location Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CJOTAMASTIC 80, RED .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

JOTAMASTIC 80, GREY .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

HARDTOP AS, COLOUR .013" - .018" 150 bar 4 h 0 h 4A : 1B 1 h 26 0 50

Page 12 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

10.6 FC 2 h * 1,5 h * 40 min * 17 0

5.3 FC 24 h * 10 h * 4 h * 17 0

10 FC 10 h * 5 h * 2,5 h * 10 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible

PR

R

R

HARDTOP AS,COLOUR 50 50 100

94 P NR

P

P

JOTAMASTIC 80,GREY 80 150 188 P

BARRIER 77,GREY 53 50

23C 40CThinner

Dry spec. Wet spec. Brush Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervalsProduct Application Methods10C

Substrate Mild steel Area 1 No. 12

Spray

Location Date 7/1/2012

Position 7B ISO 12944-2 category N/A

Customer Approved by Version 1Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

Dry to touch 23 C Flash Point C

250

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CBARRIER 77,GREY .015" - .021" 150 bar 24 h 1/2 h 3A : 1B 10 min 25 5 50

JOTAMASTIC 80, GREY .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

HARDTOP AS, COLOUR .013" - .018" 150 bar 4 h 0 4A : 1B 1 h 26 0 50

Page 13 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

10 TU 24 h * 10 h * 4 h * 17 0

10 TU 24 h * 10 h * 4 h * 17 0

10 TU 24 h * 10 h * 4 h * 17 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible

JOTAMASTIC 80, GREY 80 80 100 P

Product

P

R

R

R P

240

JOTAMASTIC 80, RED 80 80 100 P

Dry spec. Wet spec. Brush Roller

JOTAMASTIC 80, GREY 80 80 100 P NR

Surface Prep. Loose paint and heavy corrosion to be removed by scraping. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Corroded and damaged areas to be power-tool cleaned to St. 3 (ISO 8501-1:2007). Edges to intact paint system to be feathered.

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner10C 23C 40C

Substrate Mild steel Area 1 No. 13

Version 1Location Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Position 8R ISO 12944-2 category N/A

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max C

Recommended Pot life Induction Time

Mixing Ratio

Volume

JOTAMASTIC 80, GREY .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

JOTAMASTIC 80, RED .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

JOTAMASTIC 80, GREY .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

Page 14 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

10.6 FC 2 h * 1,5 h * 40 min * 17 0

5.3 FC 24 h * 10 h * 4 h * 17 0

5.3 FC 24 h * 10 h * 4 h * 17 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible

Flash Point C

Application RestrictionNozzle Orifice

Pot life Induction Time

Mixing Ratio

Volume

Dry to touch 23 C

350

JOTAMASTIC 80, GREY

Product Recommended

80 150 188 P

NR

P

R

R

R P

JOTAMASTIC 80, RED 80 150 188 P

Dry spec. Wet spec. Brush Roller

BARRIER 77, GREY 53 50 94 P

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner10C 23C 40C

Position 8B ISO 12944-2 category N/ASubstrate Mild steel Area 1 No. 14

Version 1Location Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Nozzle Pressure23 C Min C Max C

JOTAMASTIC 80, GREY .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

JOTAMASTIC 80, RED .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

JOTAMASTIC 80, GREY .017" - .023" 150 bar 2 h 10 min 7A : 1B 4 h 35 10 50

Page 15 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

16 TU 5 h * 4 h * 3 h * 7 0

16 TU 5 h * 4 h * 3 h * 7 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible50

Product Recommended Application Restriction

Min C Max C

NR

SOLVALITT, ALUMINIUM 40 25 63 P P

SOLVALITT, ALUMINIUM R

R

40 25 63 P

10C 23C 40CDry spec. Wet spec. Brush Roller

Surface Prep. SSPC-SP11

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 9R ISO 12944-2 category N/ASubstrate Mild steel Area 1 No. 15

Location Date 7/1/2012Version 1Customer Approved by

Product Application Methods

Spray

Project EDC Land Rig Prepared by

Pot life Induction Time

Mixing Ratio

Volume

Dry to touch 23 C Flash Point C Nozzle Orifice Nozzle Pressure

23 C

Hamed Mosbah - Jotun Coatings

SOLVALITT, ALUMINIUM .015" - .021" 150 bar NA NA NA 30 min 26 5 50

SOLVALITT, ALUMINIUM .015" - .021" 150 bar NA NA NA 30 min 26 5 50

Page 16 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

11.2 TU 2 h * 1,5 h * 1 h * 7 0

11.2 TU 2 h * 1,5 h * 1 h * 7 0

9.6 TU 24 h * 16 h * 12 h * 2 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible140

PILOT II, COLOUR 48 40 83 P

NR

P

R

R

R P

PPILOT QD PRIMER, GREY 56 50 89

Dry spec. Wet spec. Brush Roller

PILOT QD PRIMER, RED 56 50 89 P

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Welding seams and areas with damaged shopprimer to be power-tool cleaned to St. 3 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner10C 23C 40C

Substrate Mild steel Area 1 No. 16

Location Date 7/1/2012

Position 10R ISO 12944-2 category N/A

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by Version 1

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max C

NA

PILOT QD PRIMER, RED .015" - .021" 150 bar NA NA NA

150 bar NA NA 5

15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA

NA 15 min 26 50

30 min 37 5 50

PILOT QD PRIMER, GREY .015" - .021"

Page 17 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.6 TU 2 h * 1,5 h * 1 h * 7 0

8.5 TU 4 h * 2 h * 1,5 h * 7 0

TU:Touch up R: Recommended NR: Not Recommended P:Possible

Mixing Ratio

Volume

R

140

Product Recommended Pot life Induction Time

Brush

NR

PIONER TC, COLOUR 34 40 118 P P

PILOT QD PRIMER, GREY R

N/A

Filmthickness (m) Recoating intervals Thinner

Substrate

56 100 179 P

10C

17

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. Welding seams and areas with damaged shopprimer to be power-tool cleaned to St. 3 (ISO 8501-1:2007).

Type of coat Vol. solids %23C 40C

Dry spec. Wet spec.

Position 11R ISO 12944-2 categoryMild steel Area 1 No.

Customer Approved by VersionLocation Date 7/1/2012

1Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CPILOT QD PRIMER, GREY .015" - .021" 150 bar NA NA NA 15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA NA 30 min 37 5 50

Page 18 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.6 FC 2 h * 1,5 h * 1 h * 7 0

8.5 FC 4 h * 2 h * 1,5 h * 7 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible140

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

NR

PIONER TC, COLOUR 34 40 118 P P

PILOT QD PRIMER, GREY R

R

P

10C 23C 40CDry spec. Wet spec. Brush

Filmthickness (m) Recoating intervals Thinner

56 100 179

Mild steel Area 1

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids %

Version 1

No. 18

Date 7/1/2012

11B ISO 12944-2 category

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Position N/ASubstrate

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CPILOT QD PRIMER, GREY .015" - .021" 150 bar NA NA NA 15 min 26 5 50

PIONER TC, COLOUR .018" - .026" 150 bar NA NA NA 30 min 37 5 50

Page 19 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

4.2 FC 24 h 30 d 10 h 30 d 4 h 30 d 23 0

4.2 FC 24 h 30 d 10 h 30 d 4 h 30 d 23 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible300

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

NR

TANKGUARD STORAGE, RED 63 150 238 P P

TANKGUARD STORAGE, LIGHT RED R

R

63 150 238 P

10C 23C 40CDry spec. Wet spec. Brush

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 12B ISO 12944-2 category N/ASubstrate Mild steel Area 1

Version 1

No. 19

Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CTANKGUARD STORAGE, LIGHT RED .018" - .027" 150 bar 4 h 20 min 6.5A : 1B 4 h 28 10 50

TANKGUARD STORAGE, RED .018" - .027" 150 bar 4 h 20 min 6.5A : 1B 4 h 28 10 50

Page 20 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

5.4 FC 24 h * 10 h * 4 h * 17 0

5.4 FC 24 h * 10 h * 4 h * 17 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible300

Product Recommended Pot life Induction Time

Mixing Ratio

Volume

NR

BALLOXY HB LIGHT, BEIGE 82 150 183 P P

BALLOXY HB LIGHT, LIGHT GREEN R

R

82 150 183 P

10C 23C 40CDry spec. Wet spec. Brush

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 13B ISO 12944-2 category N/ASubstrate Mild steel Area 1

Version 1

No. 20

Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max CBALLOXY HB LIGHT, LIGHT GREEN .021" - .031" 150 bar 2 h 10 min 5A : 1B 4 h 35 10 50

BALLOXY HB LIGHT, BEIGE .021" - .031" 150 bar 2 h 10 min 5A : 1B 4 h 35 10 50

Page 21 of 22

Technical specification

m

TSR

Min Max Min Max Min Max No. Max %

3.3 FC 30 h 5 d 12 h 5 d 4 h 3 d 0 0

FC:Full Coat R: Recommended NR: Not Recommended P:Possible300

Product Recommended Pot life Induction Time

NRTANKGUARD 412, WHITE R100 300 300 P

10C 23C 40CDry spec. Wet spec. Brush

Location

Roller

Surface Prep. Oil and grease etc. to be removed with a suitable detergent. The entire area to be high pressure fresh water washed at min. 350 bar in order to remove salts and other contamination. When the surface is dry the entire area is to be blast cleaned to min. Sa. 2 (ISO 8501-1:2007).

Type of coat Vol. solids % Filmthickness (m) Recoating intervals Thinner

Position 14B ISO 12944-2 category N/ASubstrate Mild steel Area 1

Version 1

No. 21

Date 7/1/2012

Project EDC Land Rig Prepared by Hamed Mosbah - Jotun Coatings

Product Application Methods

Spray

Customer Approved by

Mixing Ratio

Volume

Dry to touch 23 C Flash Point C

Application RestrictionNozzle Orifice Nozzle Pressure

23 C Min C Max C

6 h 100 10 50TANKGUARD 412, WHITE .021" - .026" 300 bar 1 h 10 min 2A : 1B

Page 22 of 22