Couplings-component 94.20-94.20 v4.00 Page l oj3

, RDW Vehic1e Technology Division

..

EC TYPE-APPROV AL CERTIFICATE

Communication conceming the:

-type appro'lal-extension of type-approval- refusal of t),1>eappn)'{ul- \.vithdravlalof type approwl

of a type of a component with regard to Directive 94/20/EC.

Type-approval number (1) : e4*94/20*94/20*2007*Ol

Reason for extension : constructive modifications

Approval mark : e4 00-2007

0.1.

SECTION I

Make (trade name ofmanufacturer) : STEELPRESS

0.2. Type and general commercialdescription(s) : BC-2200, coupling head

0.3. Means of identification of type, ifmarked on the yemele/component/separateteclmieallillit(2) : Make (trade name) and type

0.3.1. Location of that marking : on housing

0.5. Name and address of manufacturer : STEELPRESS Sp. z 0.0.ul. Powstancow Wielkopolskich 48PL-62-031 Lubon -Poznan .

07. In the case of components and separatetechnical units, location and method ofaffixing of the EEC approval mark : on housing, data stamped

'*'

P.O. Box 777

2700 AT ZoetenneerThe Netherlands

Tel. + 31 (0)79345 81 43Fax + 31 (0)79 345 8043www.rdw.nl

Vehicle Approval and lnformation

Couplings-component 94.20-94.20 v4.00 Page 2 oj3

Type-approvalnurnber:e4*94/20*94/20*2007*Ol

0.8. Name(s) and address(es) ofassemblyplant(s) : see infonnation document (Annex III),

item 0.8..

SECTION II

l. Additional infonnation (whereapplicable) : see Appendix I

2. responsible forcarrying out th:etests : DEKRA Automobil GmbH

Automobil Test CenterSenftenberger StraBe30D-O1998 Klettwitz

: 13-6-2007

: 200207271 Extension Ol

: see Appendix I

: Zoetenneer

9. The index to the infonnation package lodged with the competent authority that has grantedtype-approval, which may be obtained on request, is attached:-Application fonn relating to Annex III and annexed drawings.- Drawings and instructions for attachment.- Fitting instructions.

(1) The EEC type-approval number appeanng on this document shall consist of all sections outlined in Annex vn to Directive 70/1 56/EEC,as last amended by Directive 92/53/EEC. The component itself shall be marked as prescribed in the relevant separate Directive.

(2) If the means of identification of type contains characters not relevant to describe the vehic1e, component or separate technical unit typescovered by this type-approval certificate such characters shall be represented in the documentation by the symbol: "?" (e.g.ABC??123??).

..

3. Date of test report

4. Number of test report

5. Remarks (if any)

6. Place

7. Date

8. Signature

: B50-X

APPENDIX I

Additional infonnation

Class of the type of coupling

Categones or types of vehic1esforwhich the device is designed orrestncted

Maximum (1)

to EEC type-approval certificate number: e4*94/20*94/20*2007*Ol

concerning the component type-approval of mechanical coupling devices with regard to Directive94/20IEC.

1.

1.1.

1.2.

1.3.

1.4.

1.5.

1.6.

1.7.

1.8.

5.

Maximum verticalload S at thecoupling point (1)

Maximum load U at the fifth wheelcoupling point (1)

Maximum

Instructions for attachment of the

coupling type to the vehic1e andphotographs or drawings of the fixingpoints at the vehic1e given by themanufacturer; additional infonnation ifthe use of the coupling type isrestncted to special types of vehic1es

Infonnation on the fitting of specialtowing brackets or mounting plates (1)

Remarks (2)

: see instructions for attachment and use

: 20,2 kN

: 120 kg

tonnes

kN

. see instructions for attachment and use

: not applicable

: The installation of the coupling device on thevehic1emust be checked according to therequirements given in Annex VII (see Annex IParagraph 5.10.)

(1) Delete where not applicable.

(2) Including information as to whether fifth wheel couplings are unsuitable for positive steering.

Couplings-component 94.20-94.20 v4.00

..

Pagd of3