dxhw6 - dynamix hydro systems

72.7

7 - 7

3.03

6.5±0.05

Ø76.123 - Ø76.200

Ø142

M12 x 4 Nos.ON 1 11.1 PCD

35

Ø25+0.00- 0.03

Stainless steel 304

72.7

7 - 7

3.03

NBR

Stainless steel

NBR

Stainless steel 304

Ø142

Stainless steel 304

Stainless steel 304

CED coated Grey iron


Carbon

Carbon

Carbon

PE insulated winding

L (s

ee p

erfo

rman

ce d

ata

tabl

e)

Features • 6” Water filled heavy duty submersible motor • Easily rewindable (wet wound) induction motor with PE insulated windings

• Corrosion resistant stainless steel stator jacket and shaft • Water lubricated heavy duty radial and axial thrust bearings • Counter thrust bearing • Motors are pre-filled with clean water + Glycol mixture • High efficiency electrical design (lower operating cost) • Tropicalized design (lower winding temperature) • 6” NEMA coupling flange • Pressure compensation diaphragm

Specifications• Ratings: Three phase - 4 to 45 kW, 50 Hz

4 to 45 kW, 60 Hz• Supply voltages (Tolerance +10% / -15%):

50 Hz, 3 phase, 380 V, 400 V, 415 V 60 Hz, 3 phase, 230 V, 380 V, 460 V

• Degree of protection: IP 68• Continuous duty• Ambient temperature: 45°C• Rotation: Three phase - CCW and CW• Maximum nos. of starts/hour:

4 to 22 kW - 20 26 to 45 kW - 15

• Water pH: 6,5 - 8• Minimum cooling flow along the motor:

4 to 15 kW - 15 cm/sec 18,5 to 45 kW - 30 cm/sec

• Motor protection: Select thermal overload protection with trip time < 10 sec. at 5 x In

• Maximum submerged depth: 250 meters• Mounting: vertical / horizontal (up to 30 kW)

Special Features on Request• Mechanical shaft seal Sic/Sic.• Built-in PT 100 temperature sensor.• Double cable for Star - Delta operation.

ShaftSpline shaft: 15 teeth, 16/32 pitch, module1.5875, 30° pressure angle, coupling tolerance5 as per ANSI B.92.1. confirming with NEMA 6”

DXHW6Six-Inch Water Filled Heavy Duty Submersible Motor

DYNAMIX HYDRO SYSTEMS - 550 S Hill St., Suite 1607 / A667, Los Angeles, CA 900130399 USA T:+1-310-997-0399•www.dynamixpumps.com

Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%DXHW61552632

4 5.5 27500230 18.5 5.30 3480 69.8 75.8 77.0 0.63 0.74 0.81 10.98

663 54.5 0.0560DXHW61553632 380 11.6 4.56 3480 70.8 76.3 77.0 0.64 0.74 0.78 10.98DXHW61554732 460 9.3 4.63 3500 70.3 76.8 78.0 0.66 0.75 0.80 10.92DXHW61752632

5.5 7.5 27500230 25.8 5.30 3480 74.8 77.8 79.0 0.62 0.74 0.82 15.10

678 56.0 0.0560DXHW61753632 380 15.4 4.90 3480 75.8 78.3 79.0 0.64 0.75 0.79 15.10DXHW61754732 460 12.6 4.72 3500 74.8 77.8 79.0 0.65 0.75 0.82 15.00DXHW62102632

7.5 10 27500230 32.6 5.40 3480 75.8 78.8 80.0 0.64 0.76 0.83 20.59

708 60.2 0.0560DXHW62103632 380 20.5 5.30 3480 76.3 79.3 80.0 0.66 0.77 0.80 20.59DXHW62104732 460 16.5 5.06 3500 75.8 78.8 80.0 0.66 0.76 0.82 20.47DXHW62122632

9.3 12.5 27500230 41.8 5.55 3480 75.8 79.8 80.0 0.64 0.76 0.84 25.53

758 65.5 0.0560DXHW62123632 380 25.4 4.90 3480 76.8 79.8 80.0 0.66 0.77 0.80 25.53DXHW62124732 460 20.1 4.89 3500 77.3 80.3 81.0 0.66 0.76 0.82 25.39DXHW62152632

11 15 27500230 46.7 5.60 3480 77.8 80.3 81.0 0.64 0.77 0.84 30.20

798 69.4 0.0560DXHW62153632 380 29.3 5.25 3480 78.3 80.8 81.0 0.66 0.77 0.81 30.20DXHW62154732 460 23.3 5.26 3500 77.8 81.3 82.0 0.67 0.77 0.83 30.00DXHW62172632

13 17.5 27500230 55.6 5.65 3480 77.3 80.8 82.0 0.65 0.76 0.84 35.69

833 73.6 0.0560DXHW62173632 380 34.2 5.36 3480 78.8 81.3 82.0 0.66 0.77 0.81 35.69DXHW62174732 460 27.6 5.36 3500 77.8 80.8 82.0 0.67 0.77 0.83 35.49DXHW62202632

15 20 27500230 61.4 5.65 3480 78.3 82.0 83.0 0.64 0.76 0.85 41.18

863 76.0 0.0560DXHW62203632 380 39.0 5.37 3480 78.8 82.0 82.0 0.67 0.78 0.82 41.18DXHW62204732 460 31.1 5.38 3500 78.3 81.8 83.0 0.67 0.77 0.84 40.95DXHW62252632

18.5 25 27500230 79.4 5.66 3480 78.1 82.9 84.0 0.64 0.77 0.85 50.79

933 84.4 0.0660DXHW62253632 380 47.8 5.70 3480 78.7 83.1 83.0 0.67 0.78 0.82 50.79DXHW62254732 460 37.8 5.69 3500 78.3 82.9 84.0 0.68 0.78 0.84 50.50DXHW62302632

22 30 27500230 92.7 5.60 3480 79.1 83.9 85.0 0.65 0.76 0.85 60.40

993 90.5 0.0660DXHW62303632 380 55.8 6.23 3480 79.5 84.1 83.0 0.67 0.78 0.83 60.40DXHW62304732 460 45.0 5.80 3500 78.9 82.9 84.0 0.68 0.78 0.84 60.00DXHW62352632

26 35 27500230 104.7 5.70 3480 80.1 83.9 85.0 0.66 0.79 0.86 71.39

1053 99.0 0.0660DXHW62353632 380 65.9 6.22 3480 80.4 84.1 83.0 0.69 0.79 0.83 71.39DXHW62354732 460 52.6 6.22 3500 79.9 83.9 85.0 0.70 0.80 0.84 70.98DXHW62402632

30 40 27500230 125.4 5.75 3480 79.9 83.7 85.0 0.67 0.79 0.86 82.37

1133 112.0 0.1330DXHW62403632 380 74.3 6.18 3480 80.5 83.9 84.0 0.69 0.80 0.84 82.37DXHW62404732 460 60.0 6.19 3500 80.1 83.9 85.0 0.70 0.80 0.85 81.90DXHW62502632

37 50 27500230 150.4 5.75 3480 80.1 83.9 85.0 0.66 0.79 0.86 101.60

1183 124.0 0.1330DXHW62503632 380 91.6 5.61 3480 80.3 84.1 84.0 0.68 0.80 0.84 101.60DXHW62504732 460 74.0 5.62 3500 79.9 83.7 85.0 0.69 0.79 0.85 101.00DXHW62602632

45 60 27500230 177.7 5.77 3480 80.1 83.9 85.0 0.65 0.78 0.86 123.55

1313 135.0 0.1400DXHW62603632 380 107.6 5.63 3480 80.3 84.1 86.0 0.67 0.79 0.86 123.55DXHW62604732 460 89.9 5.64 3500 79.9 83.7 85.0 0.68 0.78 0.85 122.84



Cable DatakW Type of Start Cable x Leads x Size (mm2) Length [m] H x B

4 - 45 DOL 1 x 4 x 6 3.5 7.9 x 24.3B

H

Performance Data 60 Hz

Pn: Rated outputKa: Thrust loadUn: Rated voltageIn: Rated currentIst/In: Locked rotor current/Rated amperagen: Rated speedɳ: efficiencycos φ:Power factorTn: Rated torqueL: Motor length





Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%

DXHW61554732 4 5.5 27500380 9.80 4.10 2900 70.3 74.5 76.0 0.64 0.74 0.82 13.18

678 56.0 0.0560400 9.30 4.00 2920 71.3 75.2 76.5 0.62 0.73 0.81 13.08415 9.40 4.10 2920 71.6 74.9 76.2 0.59 0.70 0.78 13.08

DXHW61754732 5.5 7.5 27500380 13.0 4.10 2865 72.3 76.2 77.8 0.65 0.77 0.84 18.34

708 60.2 0.0560400 12.6 4.00 2880 73.3 76.7 78.0 0.63 0.75 0.83 18.25415 12.7 4.10 2895 73.8 77.2 78.5 0.61 0.73 0.81 18.15

DXHW62104732 7.5 10 27500380 17.3 5.20 2870 73.8 76.9 78.5 0.66 0.77 0.84 24.97

758 65.5 0.0560400 16.8 5.00 2880 74.8 77.7 79.0 0.64 0.75 0.83 24.88415 16.5 4.90 2890 75.3 78.2 79.5 0.61 0.73 0.82 24.80

DXHW62124732 9.3 12.5 27500380 21.0 5.20 2855 75.0 78.7 80.5 0.66 0.76 0.84 31.12

798 69.4 0.0560400 20.5 5.10 2870 76.8 79.7 81.0 0.64 0.75 0.82 30.96415 20.2 5.00 2885 77.0 79.9 81.2 0.62 0.73 0.80 30.80

DXHW62154732 11 15 27500380 24.5 5.20 2860 76.3 79.2 81.2 0.67 0.77 0.85 36.75

833 73.6 0.0560400 23.8 5.10 2880 77.3 80.7 82.0 0.64 0.76 0.83 36.49415 23.6 5.30 2890 77.8 80.9 82.2 0.62 0.74 0.81 36.37

DXHW62174732 13 17.5 27500380 28.9 5.00 2870 76.8 79.7 81.5 0.66 0.77 0.84 43.28

863 76.0 0.0560400 28.2 5.10 2890 77.8 80.7 82.0 0.63 0.76 0.82 42.98415 28.1 5.20 2890 78.3 81.2 82.5 0.61 0.73 0.79 42.98

DXHW62204732 15 20 27500380 32.4 5.20 2870 77.8 80.9 82.8 0.68 0.79 0.85 49.93

933 84.4 0.0660400 31.4 5.10 2890 78.8 81.7 83.0 0.66 0.77 0.84 49.60415 31.2 5.30 2890 79.3 82.2 83.5 0.62 0.74 0.81 49.60

DXHW62254732 18.5 25 27500380 39.9 5.10 2860 78.2 81.3 82.8 0.69 0.79 0.85 61.80

993 90.5 0.0660400 39.0 5.20 2880 78.7 81.8 83.0 0.65 0.77 0.83 61.37415 39.3 5.25 2890 79.2 82.3 83.6 0.63 0.74 0.81 61.16

DXHW62304732 22 30 27500380 46.5 5.10 2870 78.3 81.6 83.6 0.70 0.80 0.86 73.24

1053 99.0 0.0660400 44.6 5.20 2890 79.2 82.8 84.0 0.66 0.77 0.85 72.73415 45.2 5.15 2900 79.7 83.0 84.3 0.62 0.75 0.83 72.48

DXHW62354732 26 35 27500380 56.2 5.18 2870 78.7 81.8 83.6 0.70 0.79 0.86 86.56

1133 113.5 0.1330400 55.4 5.20 2890 79.3 82.8 84.0 0.65 0.77 0.84 85.96415 56.0 5.15 2900 79.9 83.1 84.3 0.62 0.75 0.82 85.66

DXHW62404732 30 40 27500380 63.2 5.22 2890 78.9 82.8 84.5 0.71 0.80 0.87 99.18

1183 125.0 0.1330400 62.4 5.30 2900 80.1 83.8 85.0 0.65 0.79 0.86 98.84415 63.8 5.32 2900 81.2 84.3 85.6 0.63 0.75 0.83 98.84

DXHW62504732 37 50 27500380 78.5 5.35 2890 79.7 82.8 84.2 0.71 0.80 0.87 123.18

1313 135.0 0.1400400 77.4 5.30 2900 80.2 83.8 85.0 0.66 0.79 0.86 121.90415 79.0 5.32 2900 81.2 84.0 85.2 0.63 0.75 0.84 121.90

DXHW62604732 45 60 27500380 93.0 5.36 2890 79.7 82.8 84.5 0.71 0.80 0.87 148.77

1413 148.0 0.1490400 88.3 5.31 2900 80.2 83.8 85.5 0.66 0.79 0.86 148.26415 87.1 5.33 2900 81.2 84.0 85.6 0.63 0.75 0.84 148.26

72.7

7 - 7

3.03

6.5±0.05

Ø76.123 - Ø76.200

Ø142

M12 x 4 Nos.ON 1 11.1 PCD

35

Ø25+0.00- 0.03

Stainless steel 304

72.7

7 - 7

3.03

NBR

Stainless steel 304

NBR

Stainless steel 304

Ø142

Stainless steel

Stainless steel 304



Carbon

Carbon

Carbon


L (s

ee p

erfo

rman

ce d

ata

tabl

e)

Features • 6” Water filled heavy duty stainless steel submersible motor • Easily rewindable (wet wound) induction motor with PE insulated windings

• Complete stainless steel AISI 304 construction • Water lubricated heavy duty radial and axial thrust bearings • Counter thrust bearing • Motors are pre-filled with clean water + Glycol mixture • Shaft extension made of stainless steel AISI 316 • High efficiency electrical design (lower operating cost) • Tropicalized design (lower winding temperature) • 6” NEMA coupling flange • Pressure compensation diaphragm





4 to 22 kW - 20 26 to 45 kW - 15

• Water pH: 6.5 - 8• Minimum cooling flow along the motor:

4 to 15 kW - 15 cm/sec 18.5 to 45 kW - 30 cm/sec


• Maximum submerged depth: 250 meters• Mounting: vertical / horizontal (up to 30 kW)

Special Features on Request• Mechanical shaft seal Sic/Sic.• Built-in PT 100 temperature sensor• Double cable for Star - Delta operation

ShaftSpline shaft: 15 teeth, 16/32 pitch, module 1.5875. 30° pressure angle, coupling tolerance 5 as per ANSI B.92.1. confirming with NEMA 6”.

DXXW6Six-Inch Water Filled Heavy Duty Stainless Steel Submersible Motor





4 - 45 DOL 1 x 4 x 6 3.5 7.9 x 24.3B

H


Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%DXXW61552632

4 5.5 27500230 18.5 5.30 3480 69.8 75.8 77.0 0.63 0.74 0.81 10.98

620 53.3 0.0560DXXW61553632 380 11.6 4.56 3480 70.8 76.3 77.0 0.64 0.74 0.78 10.98DXXW61554732 460 9.3 4.63 3500 70.3 76.8 78.0 0.66 0.75 0.80 10.92DXXW61752632

5.5 7.5 27500230 25.8 5.30 3480 74.8 77.8 79.0 0.62 0.74 0.82 15.10

635 54.8 0.0560DXXW61753632 380 15.4 4.90 3480 75.8 78.3 79.0 0.64 0.75 0.79 15.10DXXW61754732 460 12.6 4.72 3500 74.8 77.8 79.0 0.65 0.75 0.82 15.00DXXW62102632

7.5 10 27500230 32.6 5.40 3480 75.8 78.8 80.0 0.64 0.76 0.83 20.59

665 58.5 0.0560DXXW62103632 380 20.5 5.30 3480 76.3 79.3 80.0 0.66 0.77 0.80 20.59DXXW62104732 460 16.5 5.06 3500 75.8 78.8 80.0 0.66 0.76 0.82 20.47DXXW62122632

9.3 12.5 27500230 41.8 5.55 3480 75.8 79.8 80.0 0.64 0.76 0.84 25.53

715 64.5 0.0560DXXW62123632 380 25.4 4.90 3480 76.8 79.8 80.0 0.66 0.77 0.80 25.53DXXW62124732 460 20.1 4.89 3500 77.3 80.3 81.0 0.66 0.76 0.82 25.39DXXW62152632

11 15 27500230 46.7 5.60 3480 77.8 80.3 81.0 0.64 0.77 0.84 30.20

755 67.5 0.0560DXXW62153632 380 29.3 5.25 3480 78.3 80.8 81.0 0.66 0.77 0.81 30.20DXXW62154732 460 23.3 5.26 3500 77.8 81.3 82.0 0.67 0.77 0.83 30.00DXXW62172632

13 17.5 27500230 55.6 5.65 3480 77.3 80.8 82.0 0.65 0.76 0.84 35.69

790 73.2 0.0560DXXW62173632 380 34.2 5.36 3480 78.8 81.3 82.0 0.66 0.77 0.81 35.69DXXW62174732 460 27.6 5.36 3500 77.8 80.8 82.0 0.67 0.77 0.83 35.49DXXW62202632

15 20 27500230 61.4 5.65 3480 78.3 82.0 83.0 0.64 0.76 0.85 41.18

820 73.7 0.0560DXXW62203632 380 39.0 5.37 3480 78.8 82.0 82.0 0.67 0.78 0.82 41.18DXXW62204732 460 31.1 5.38 3500 78.3 81.8 83.0 0.67 0.77 0.84 40.95DXXW62252632

18.5 25 27500230 79.4 5.66 3480 78.1 82.9 84.0 0.64 0.77 0.85 50.79

890 84.0 0.0660DXXW62253632 380 47.8 5.70 3480 78.7 83.1 83.0 0.67 0.78 0.82 50.79DXXW62254732 460 37.8 5.69 3500 78.3 82.9 84.0 0.68 0.78 0.84 50.50DXXW62302632

22 30 27500230 92.7 5.60 3480 79.1 83.9 85.0 0.65 0.76 0.85 60.40

950 88.0 0.0660DXXW62303632 380 55.8 6.23 3480 79.5 84.1 83.0 0.67 0.78 0.83 60.40DXXW62304732 460 45.0 5.80 3500 78.9 82.9 84.0 0.68 0.78 0.84 60.00DXXW62352632

26 35 27500230 104.7 5.70 3480 80.1 83.9 85.0 0.66 0.79 0.86 71.39

1010 93.4 0.0660DXXW62353632 380 65.9 6.22 3480 80.4 84.1 83.0 0.69 0.79 0.83 71.39DXXW62354732 460 52.6 6.22 3500 79.9 83.9 85.0 0.70 0.80 0.84 70.98DXXW62402632

30 40 27500230 125.4 5.75 3480 79.9 83.7 85.0 0.67 0.79 0.86 82.37

1090 111.7 0.1330DXXW62403632 380 74.3 6.18 3480 80.5 83.9 84.0 0.69 0.80 0.84 82.37DXXW62404732 460 60.0 6.19 3500 80.1 83.9 85.0 0.70 0.80 0.85 81.90DXXW62502632

37 50 27500230 150.4 5.75 3480 80.1 83.9 85.0 0.66 0.79 0.86 101.60

1140 120.0 0.1330DXXW62503632 380 91.6 5.61 3480 80.3 84.1 84.0 0.68 0.80 0.84 101.60DXXW62504732 460 74.0 5.62 3500 79.9 83.7 85.0 0.69 0.79 0.85 101.00DXXW62602632

45 60 27500230 177.7 5.77 3480 80.1 83.9 85.0 0.65 0.78 0.86 123.55

1270 131.0 0.1400DXXW62603632 380 107.6 5.63 3480 80.3 84.1 86.0 0.67 0.79 0.86 123.55DXXW62604732 460 89.9 5.64 3500 79.9 83.7 85.0 0.68 0.78 0.85 122.84






Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%

DXXW61554732 4 5.5 27500380 9.80 4.10 2900 70.3 74.5 76.0 0.64 0.74 0.82 13.18

635 54.8 0.0560400 9.30 4.00 2920 71.3 75.2 76.5 0.62 0.73 0.81 13.08415 9.40 4.10 2920 71.6 74.9 76.2 0.59 0.70 0.78 13.08

DXXW61754732 5.5 7.5 27500380 13.0 4.10 2865 72.3 76.2 77.8 0.65 0.77 0.84 18.34

665 58.5 0.0560400 12.6 4.00 2880 73.3 76.7 78.0 0.63 0.75 0.83 18.25415 12.7 4.10 2895 73.8 77.2 78.5 0.61 0.73 0.81 18.15

DXXW62104732 7.5 10 27500380 17.3 5.20 2870 73.8 76.9 78.5 0.66 0.77 0.84 24.97

715 64.5 0.0560400 16.8 5.00 2880 74.8 77.7 79.0 0.64 0.75 0.83 24.88415 16.5 4.90 2890 75.3 78.2 79.5 0.61 0.73 0.82 24.80

DXXW62124732 9.3 12.5 27500380 21.0 5.20 2855 75.0 78.7 80.5 0.66 0.76 0.84 31.12

755 67.4 0.0560400 20.5 5.10 2870 76.8 79.7 81.0 0.64 0.75 0.82 30.96415 20.2 5.00 2885 77.0 79.9 81.2 0.62 0.73 0.80 30.80

DXXW62154732 11 15 27500380 24.5 5.20 2860 76.3 79.2 81.2 0.67 0.77 0.85 36.75

790 73.2 0.0560400 23.8 5.10 2880 77.3 80.7 82.0 0.64 0.76 0.83 36.49415 23.6 5.30 2890 77.8 80.9 82.2 0.62 0.74 0.81 36.37

DXXW62174732 13 17.5 27500380 28.9 5.00 2870 76.8 79.7 81.5 0.66 0.77 0.84 43.28

820 73.7 0.0560400 28.2 5.10 2890 77.8 80.7 82.0 0.63 0.76 0.82 42.98415 28.1 5.20 2890 78.3 81.2 82.5 0.61 0.73 0.79 42.98

DXXW62204732 15 20 27500380 32.4 5.20 2870 77.8 80.9 82.8 0.68 0.79 0.85 49.93

890 84.0 0.0660400 31.4 5.10 2890 78.8 81.7 83.0 0.66 0.77 0.84 49.60415 31.2 5.30 2890 79.3 82.2 83.5 0.62 0.74 0.81 49.60

DXXW62254732 18.5 25 27500380 39.9 5.10 2860 78.2 81.3 82.8 0.69 0.79 0.85 61.80

950 88.0 0.0660400 39.0 5.20 2880 78.7 81.8 83.0 0.65 0.77 0.83 61.37415 39.3 5.25 2890 79.2 82.3 83.6 0.63 0.74 0.81 61.16

DXXW62304732 22 30 27500380 46.5 5.10 2870 78.3 81.6 83.6 0.70 0.80 0.86 73.24

1010 93.4 0.0660400 44.6 5.20 2890 79.2 82.8 84.0 0.66 0.77 0.85 72.73415 45.2 5.15 2900 79.7 83.0 84.3 0.62 0.75 0.83 72.48

DXXW62354732 26 35 27500380 56.2 5.18 2870 78.7 81.8 83.6 0.70 0.79 0.86 86.56

1090 111.7 0.1330400 55.4 5.20 2890 79.3 82.8 84.0 0.65 0.77 0.84 85.96415 56.0 5.15 2900 79.9 83.1 84.3 0.62 0.75 0.82 85.66

DXXW62404732 30 40 27500380 63.2 5.22 2890 78.9 82.8 84.5 0.71 0.80 0.87 99.18

1140 120.0 0.1330400 62.4 5.30 2900 80.1 83.8 85.0 0.65 0.79 0.86 98.84415 63.8 5.32 2900 81.2 84.3 85.6 0.63 0.75 0.83 98.84

DXXW62504732 37 50 27500380 78.5 5.35 2890 79.7 82.8 84.2 0.71 0.80 0.87 123.18

1270 131.0 0.1400400 77.4 5.30 2900 80.2 83.8 85.0 0.66 0.79 0.86 121.90415 79.0 5.32 2900 81.2 84.0 85.2 0.63 0.75 0.84 121.90

DXXW62604732 45 60 27500380 93.0 5.36 2890 79.7 82.8 84.5 0.71 0.80 0.87 148.77

1370 142.7 0.1490400 88.3 5.31 2900 80.2 83.8 85.5 0.66 0.79 0.86 148.26415 87.1 5.33 2900 81.2 84.0 85.6 0.63 0.75 0.84 148.26

6±0.1

Ø126.924 - Ø127.000Ø38.1

101.

35 -

101.

60

Ø190

Ø1 1/16" x 4 Nos.ON 152.4 PCD

Stainless steel

101.

35 -

101.

60

NBR

Stainless steel


Stainless steel

NBR

Ø190




Carbon


Bronze

Rubber

Rubber

Bronze


CEDcoated Grey iron


L (s

ee p

erfo

rman

ce d

ata

tabl

e)


• Corrosion resistant stainless steel stator jacket and shaft • Water lubricated heavy duty radial and axial thrust bearings • Counter thrust bearing • Motors are pre-filled with clean water + Glycol mixture • High efficiency electrical design (lower operating cost) • Tropicalized design (lower winding temperature) • 8” NEMA coupling flange • Pressure compensation diaphragm





30 to 55 kW - 25 66 to 130 kW - 20

• Water pH: 6,5 - 8• Minimum cooling flow along the motor:

30 to 37 kW - 30 cm/sec 45 to 130 kW - 45 cm/sec


• Maximum submerged depth: 200 meters.

Special Features on Request• Mechanical shaft seal Sic/Sic• Built-in PT 100 temperature sensor• Special voltages• Double cable for Star - Delta operation

ShaftSpline shaft: 23 teeth, 16/32 pitch, module1.5875, 30° pressure angle, coupling tolerance5 as per ANSI B.92.1, confirming with NEMA 8”.

DXHW8Eight-Inch Water Filled Heavy Duty Submersible Motor





30 - 93 DOL 1 x 4 x 16 5 14 x 37.6

110 - 130 DOL 1 x 3 x 35 + 1 x 1 x 16 5 15.3 x 35


Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%DXHW82404732 30 40 45000 460 57.2 5.76 3480 82.1 84.3 85.0 0.78 0.84 0.89 82.40 1020 172.0 0.1793DXHW82502632

37 50 45000230 149.6 5.76 3480 82.1 83.9 85.0 0.75 0.81 0.84 101.60 1020 172.0 0.1793

DXHW82503632 380 89.1 5.75 3500 82.7 84.7 85.4 0.76 0.82 0.85 101.00 1020 172.0 0.1793DXHW82504732 460 72.2 5.75 3480 82.1 84.5 85.0 0.77 0.84 0.87 101.60 1110 194.0 0.1943DXHW82602632

45 60 45000230 179.8 5.75 3500 83.1 84.9 86.0 0.75 0.81 0.84 122.85 1110 194.0 0.1943

DXHW82603632 380 107.6 5.80 3510 83.9 85.7 86.0 0.75 0.81 0.85 122.50 1110 194.0 0.1943DXHW82604732 460 86.5 5.80 3500 83.3 85.5 86.3 0.76 0.82 0.87 122.85 1210 214.0 0.2130DXHW82752632

55 75 45000230 217.3 5.75 3500 83.2 85.3 87.0 0.75 0.80 0.84 150.00 1210 214.0 0.2130

DXHW82753632 380 130.0 5.80 3510 84.2 86.1 87.0 0.76 0.82 0.85 149.72 1210 214.0 0.2130DXHW82754732 460 104.9 5.80 3500 83.7 85.9 87.0 0.76 0.82 0.87 150.00 1260 228.0 0.2204DXHW82902632

66 90 45000230 254.7 5.75 3500 83.3 86.1 88.0 0.74 0.81 0.85 180.20 1427 267.0 0.2430

DXHW82903632 380 152.4 6.00 3510 84.9 87.2 88.0 0.75 0.82 0.86 179.66 1427 267.0 0.2430DXHW82904732 460 124.4 6.00 3500 84.1 86.9 88.0 0.76 0.83 0.87 180.20 1427 267.0 0.2430DXHW83102632

75 100 45000230 286.1 5.76 3500 83.5 85.9 88.0 0.75 0.82 0.86 204.70 1477 278.0 0.2503

DXHW83103632 380 169.2 6.01 3510 85.1 87.3 88.0 0.76 0.84 0.88 204.16 1477 278.0 0.2503DXHW83104732 460 139.8 6.01 3500 84.2 86.9 88.0 0.77 0.83 0.88 204.70 1477 278.0 0.2503DXHW83122632

93 125 45000230 363.2 5.76 3500 83.7 85.7 88.0 0.75 0.81 0.84 253.80 1617 305.0 0.2690

DXHW83123632 380 216.3 6.01 3510 84.7 87.1 88.4 0.75 0.81 0.85 253.16 1617 305.0 0.2690DXHW83124732 460 174.7 6.01 3500 84.5 86.9 88.3 0.76 0.82 0.87 253.80 1617 305.0 0.2690DXHW83153632 110 150 45000 380 263.0 6.01 3500 82.3 84.7 86.0 0.75 0.81 0.85 300.29 1747 342.0 0.2877DXHW83154732 460 214.0 6.01 3480 82.4 84.9 86.2 0.76 0.82 0.86 302.02 1747 342.0 0.2877DXHW83174732 130 175 45000 460 250.0 6.01 3480 82.6 85.0 86.3 0.77 0.83 0.87 356.93 1947 388.0 0.3213

B

H

B

H 8+

B

H

B

H 8+






Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%

DXHW82404732 30 40 45000380 62.8 4.51 2890 79.9 83.3 84.2 0.72 0.83 0.89 99.19

1020 172.0 0.1793400 59.9 4.61 2900 81.1 84.1 85.0 0.71 0.84 0.89 98.84415 57.8 4.66 2900 80.7 83.9 84.9 0.69 0.83 0.88 98.84

DXHW82504732 37 50 45000380 78.0 4.70 2890 80.1 83.1 84.1 0.74 0.84 0.88 122.30

1110 194.0 0.1943400 75.0 4.80 2900 81.3 84.1 85.0 0.72 0.83 0.86 121.90415 74.0 4.85 2900 80.7 83.5 84.4 0.70 0.80 0.84 121.90

DXHW82604732 45 60 45000380 92.5 4.70 2890 80.3 83.3 85.2 0.73 0.87 0.88 148.80

1210 214.0 0.2130400 89.8 4.80 2900 81.5 84.1 85.9 0.72 0.81 0.86 148.30415 88.8 4.90 2900 81.3 83.9 85.8 0.70 0.80 0.84 148.30

DXHW82754732 55 75 45000380 113.8 4.90 2890 80.5 84.1 85.7 0.74 0.84 0.88 181.84

1260 228.0 0.2204400 109.5 5.00 2910 81.9 85.1 86.4 0.72 0.82 0.86 180.60415 108.8 5.10 2910 81.5 84.7 86.2 0.69 0.80 0.84 180.60

DXHW82904732 66 90 45000380 135.5 4.90 2890 80.7 85.3 86.4 0.74 0.85 0.89 218.20

1427 267.0 0.2430400 131.0 5.00 2910 81.9 85.9 86.9 0.72 0.83 0.86 216.70415 128.5 5.05 2910 81.3 85.3 86.6 0.69 0.81 0.84 216.70

DXHW83104732 75 100 45000380 151.0 4.91 2890 80.9 84.7 86.2 0.74 0.85 0.89 247.96

1477 278.0 0.2503400 147.0 5.01 2910 81.9 85.5 87.0 0.72 0.83 0.87 246.26415 145.5 5.11 2910 81.7 85.3 86.6 0.70 0.79 0.84 246.26

DXHW83124732 93 125 45000380 186.8 4.91 2900 80.5 84.5 86.5 0.75 0.84 0.88 306.40

1617 305.0 0.2690400 181.0 5.01 2910 81.5 86.4 87.8 0.71 0.81 0.86 305.36415 180.5 5.06 2920 81.7 85.5 87.0 0.70 0.79 0.84 304.31

DXHW83154732 110 150 45000380 231.0 4.92 2890 79.0 83.3 85.0 0.72 0.81 0.85 363.68

1747 342.0 0.2877400 224.0 5.02 2900 79.5 84.1 85.5 0.71 0.79 0.83 362.42415 220.0 5.08 2900 80.0 84.7 86.0 0.69 0.77 0.81 362.42

DXHW83174732 130 175 45000380 273.0 4.93 2890 79.2 83.4 85.2 0.72 0.81 0.85 429.80

1947 388.0 0.3213400 261.0 5.02 2900 79.7 84.3 85.7 0.71 0.80 0.84 428.32415 256.0 5.08 2900 80.2 84.9 86.2 0.70 0.78 0.82 428.32

6±0.1

Ø126.924 - Ø127.000Ø38.1

101.

35 -

101.

60

Ø190

Ø1 1/16" x 4 Nos.ON 152.4 PCD

L (s

ee p

erfo

rman

ce d

ata

tabl

e)

101.

35 -

101.

60Stainless steel 304

NBR

Stainless steel 304

Stainless steel

Carbon


Stainless steel 304

Carbon

Stainless steel

Carbon

NBR

Stainless steel 304

Ø190

Carbon

Carbon

Stainless steel

Stainless steel

Features • 8” Water filled heavy duty stainless steel submersible motor • Easily rewindable (wet wound) induction motor with PE insulated windings

• Complete stainless steel AISI 304 construction • Water lubricated heavy duty radial and axial thrust bearings • Counter thrust bearing • Motors are pre-filled with clean water + Glycol mixture • Shaft extension made of stainless steel AISI 316 • High efficiency electrical design (lower operating cost) • Tropicalized design (lower winding temperature) • 8” NEMA coupling flange • Pressure compensation diaphragm





30 to 55 kW - 25 66 to 110 kW - 20




• Maximum submerged depth: 200 meters

Special Features on Request• Mechanical shaft seal Sic/Sic• Built-in PT 100 temperature sensor• Special voltages• Double cable for Star - Delta operation

ShaftSpline shaft: 23 teeth, 16/32 pitch, module1.5875, 30° pressure angle, coupling tolerance5 as per ANSI B.92.1, confirming with NEMA 8”.

DXXW8Eight-Inch Water Filled Heavy Duty Stainless Steel Submersible Motor





30 - 93 DOL 1 x 4 x 16 5 14 x 37.6

110 DOL 1 x 3 x 35 + 1 x 1 x 16 5 15.3 x 35


Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%DXXW82404732 30 40 45000 460 57.2 5.76 3480 82.1 84.3 85.0 0.78 0.84 0.89 82.40 1069 183.0 0.1900DXXW82502632

37 50 45000230 149.6 5.76 3480 82.1 83.9 85.0 0.75 0.81 0.84 101.60 1069 183.0 0.1900

DXXW82503632 380 89.1 5.75 3500 82.7 84.7 85.4 0.76 0.82 0.85 101.00 1069 183.0 0.1900DXXW82504732 460 72.2 5.75 3480 82.1 84.5 85.0 0.77 0.84 0.87 101.60 1159 205.0 0.2100DXXW82602632

45 60 45000230 179.8 5.75 3500 83.1 84.9 86.0 0.75 0.81 0.84 122.85 1159 205.0 0.2100

DXXW82603632 380 107.6 5.80 3510 83.9 85.7 86.0 0.75 0.81 0.85 122.50 1159 205.0 0.2100DXXW82604732 460 86.5 5.80 3500 83.3 85.5 86.3 0.76 0.82 0.87 122.85 1259 228.0 0.2200DXXW82752632

55 75 45000230 217.3 5.75 3500 83.2 85.3 87.0 0.75 0.80 0.84 150.00 1259 228.0 0.2200

DXXW82753632 380 130.0 5.80 3510 84.2 86.1 87.0 0.76 0.82 0.85 149.72 1259 228.0 0.2200DXXW82754732 460 104.9 5.80 3500 83.7 85.9 87.0 0.76 0.82 0.87 150.00 1309 240.0 0.2300DXXW82902632

66 90 45000230 254.7 5.75 3500 83.3 86.1 88.0 0.74 0.81 0.85 180.20 1398 249.0 0.2400

DXXW82903632 380 152.4 6.00 3510 84.9 87.2 88.0 0.75 0.82 0.86 179.66 1398 249.0 0.2400DXXW82904732 460 124.4 6.00 3500 84.1 86.9 88.0 0.76 0.83 0.87 180.20 1398 249.0 0.2400DXXW83102632

75 100 45000230 286.1 5.76 3500 83.5 85.9 88.0 0.75 0.82 0.86 204.70 1448 261.0 0.2500

DXXW83103632 380 169.2 6.01 3510 85.1 87.3 88.0 0.76 0.84 0.88 204.16 1448 261.0 0.2500DXXW83104732 460 139.8 6.01 3500 84.2 86.9 88.0 0.77 0.83 0.88 204.70 1448 261.0 0.2500DXXW83122632

93 125 45000230 363.2 5.76 3500 83.7 85.7 88.0 0.75 0.81 0.84 253.80 1588 293.0 0.2700

DXXW83123632 380 216.3 6.01 3510 84.7 87.1 88.4 0.75 0.81 0.85 253.16 1588 293.0 0.2700DXXW83124732 460 174.7 6.01 3500 84.5 86.9 88.3 0.76 0.82 0.87 253.80 1588 293.0 0.2700DXXW83153632 110 150 45000 380 263.0 6.01 3500 82.3 84.7 86.0 0.75 0.81 0.85 300.29 1718 323.0 0.2900DXXW83154732 460 214.0 6.01 3480 82.4 84.9 86.2 0.76 0.82 0.86 302.02 1718 323.0 0.2900DXXW83174732 130 175 45000 460 250.0 6.01 3480 85.0 85.0 86.3 0.77 0.83 0.87 356.93 1918 370.0 0.3200

B

H

B

H 8+

B

H

B

H 8+






Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%

DXXW82404732 30 40 45000380 62,8 4,51 2890 79,9 83,3 84,2 0,72 0,83 0,89 99,19

1069 183.0 0.1900400 59,9 4,61 2900 81,1 84,1 85,0 0,71 0,84 0,89 98,84415 57,8 4,66 2900 80,7 83,9 84,9 0,69 0,83 0,88 98,84

DXXW82504732 37 50 45000380 78,0 4,70 2890 80,1 83,1 84,1 0,74 0,84 0,88 122,30

1159 205.0 0.2100400 75,0 4,80 2900 81,3 84,1 85,0 0,72 0,83 0,86 121,90415 74,0 4,85 2900 80,7 83,5 84,4 0,70 0,80 0,84 121,90

DXXW82604732 45 60 45000380 92,5 4,70 2890 80,3 83,3 85,2 0,73 0,87 0,88 148,80

1259 228.0 0.2200400 89,8 4,80 2900 81,5 84,1 85,9 0,72 0,81 0,86 148,30415 88,8 4,90 2900 81,3 83,9 85,8 0,70 0,80 0,84 148,30

DXXW82754732 55 75 45000380 113,8 4,90 2890 80,5 84,1 85,7 0,74 0,84 0,88 181,84

1309 240.0 0.2300400 109,5 5,00 2910 81,9 85,1 86,4 0,72 0,82 0,86 180,60415 108,8 5,10 2910 81,5 84,7 86,2 0,69 0,80 0,84 180,60

DXXW82904732 66 90 45000380 135,5 4,90 2890 80,7 85,3 86,4 0,74 0,85 0,89 218,20

1398 249.0 0.2400400 131,0 5,00 2910 81,9 85,9 86,9 0,72 0,83 0,86 216,70415 128,5 5,05 2910 81,3 85,3 86,6 0,69 0,81 0,84 216,70

DXXW83104732 75 100 45000380 151,0 4,91 2890 80,9 84,7 86,2 0,74 0,85 0,89 247,96

1448 261.0 0.2500400 147,0 5,01 2910 81,9 85,5 87,0 0,72 0,83 0,87 246,26415 145,5 5,11 2910 81,7 85,3 86,6 0,70 0,79 0,84 246,26

DXXW83124732 93 125 45000380 186,8 4,91 2900 80,5 84,5 86,5 0,75 0,84 0,88 306,40

1588 293.0 0.2700400 181,0 5,01 2910 81,5 86,4 87,8 0,71 0,81 0,86 305,36415 180,5 5,06 2920 81,7 85,5 87,0 0,70 0,79 0,84 304,31

DXXW83154732 110 150 45000380 231,0 4,92 2890 79,0 83,3 85,0 0,72 0,81 0,85 363,68

1718 323.0 0.2900400 224,0 5,02 2900 79,5 84,1 85,5 0,71 0,79 0,83 362,42415 220,0 5,08 2900 80,0 84,7 86,0 0,69 0,77 0,81 362,42

DXXW83174732 130 175 45000380 273,0 4,93 2890 79,2 83,4 85,2 0,72 0,81 0,85 429,80

1918 370.0 0.3200400 261,0 5,02 2900 79,7 84,3 85,7 0,71 0,80 0,84 428,32415 256,0 5,08 2900 80,2 84,9 86,2 0,70 0,78 0,82 428,32

Stainless steel

101.

35NBR


Sic/Sic

Stainless steel


Stainless steel

NBR

Ø240

L (s

ee p

erfo

rman

ce d

ata

tabl

e)


Carbon


Bronze

Rubber

Rubber

Bronze



101.

60

9.52-0.036-0.000

Ø240

Ø22 x 4 Nos.ON 190.5 PCD

101.

35 -

101.

60

Ø42.830Ø42.850

Ø127.000 - Ø126.93147.5

5±0.1

9.52-0.09-0.00

85


• Corrosion resistant stainless steel stator jacket and shaft • Water lubricated heavy duty radial and axial thrust bearings • Counter thrust bearing • Mechanical shaft seal (Sic/Sic) provided • Motors are pre-filled with clean water + Glycol mixture • High efficiency electrical design (lower operating cost) • Tropicalized design (lower winding temperature) • Pressure compensation diaphragm

Specifications• Ratings: Three phase - 55 to 185 kW• Supply voltages (Tolerance ±10%):

50 Hz, 3 phase, 380 V, 400 V, 415 V 60 Hz, 3 phase, 380 V, 460 V


55 to 135 kW - 20 150 to 185 kW - 15




• Maximum submerged depth: 200 meters

Special Features on Request• Built-in PT 100 temperature sensor• Special voltages• Double cable for Star - Delta operation

ShaftCylindrical shaft with key

DXHW1Ten-Inch Water Filled Heavy Duty Submersible Motor





55 - 185 DOL 3 x 1 x 70 + 1 x 1 x 50 5 14 mm


Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%DXHW12753632 55 75 60000 380 136.2 5.69 3500 81.1 82.1 85.0 0.67 0.76 0.83 150.00 1496 309.0 0.2942DXHW12754732 460 110.0 5.70 3480 82.1 84.1 85.0 0.74 0.81 0.85 151.00DXHW12903632 66 90 60000 380 163.5 5.85 3500 81.1 83.1 85.0 0.68 0.78 0.83 180.22 1566 330.0 0.3035DXHW12904732 460 133.4 5.89 3480 83.1 84.1 85.0 0.74 0.82 0.84 181.00DXHW13103632 75 100 60000 380 183.6 5.94 3500 83.1 85.1 86.0 0.69 0.77 0.83 205.00 1666 361.0 0.3259DXHW13104732 460 149.8 5.85 3480 83.1 84.1 85.0 0.75 0.82 0.85 206.00DXHW13123632 93 125 60000 380 230.3 5.19 3510 81.1 83.1 85.0 0.68 0.77 0.83 253.10 1716 378.0 0.3259DXHW13124732 460 183.6 4.67 3500 83.1 84.1 85.0 0.75 0.82 0.86 253.80DXHW13153632 110 150 60000 380 274.0 5.20 3510 84.1 86.1 86.0 0.69 0.78 0.84 299.40 1766 397.0 0.3407DXHW13154732 460 224.5 5.16 3500 84.1 86.1 86.0 0.70 0.79 0.84 300.20DXHW13183632 135 180 60000 380 313.0 5.45 3510 84.1 86.1 86.0 0.72 0.81 0.86 367.50 1826 419.0 0.3594DXHW13184732 460 253.5 5.15 3500 85.1 87.1 87.0 0.76 0.83 0.87 368.50DXHW13203632 150 200 60000 380 353.0 5.59 3510 84.1 87.1 87.0 0.74 0.82 0.87 408.30 1866 433.0 0.3594DXHW13204732 460 293.5 5.30 3500 85.1 87.1 87.0 0.76 0.83 0.87 409.50DXHW13223632 165 225 60000 380 393.0 5.83 3510 84.1 86.1 86.0 0.74 0.81 0.85 449.10 1916 451.0 0.3743DXHW13224732 460 333.0 5.38 3500 85.1 86.1 87.0 0.72 0.80 0.85 450.40DXHW13253632 185 250 60000 380 463.0 5.77 3510 84.1 87.1 87.0 0.65 0.76 0.83 503.60 1966 472.0 0.3966DXHW13254732 460 376.0 5.64 3500 85.1 87.1 87.0 0.69 0.78 0.84 505.00

DD+






Motor Type Pn Ka[N]

Un[V]

ln lst/ln n [min-1]

n [%] COS φ Tn

[Nm]L

[mm]

Gross Wt.[kg]

Gross Volume{m3]

kW HP [A] 50% 75% 100% 50% 75% 100%

DXHW12754732 55 75 60000380 123.4 4.54 2890 76.9 81.1 82.6 0.68 0.77 0.82 181.84

1496 309.0 0.2942400 115.2 4.59 2900 79.1 82.3 83.0 0.69 0.79 0.83 181.21415 113.2 4.64 2900 79.1 82.1 83.0 0.68 0.79 0.83 181.21

DXHW12904732 66 90 60000380 147.0 4.59 2890 78.4 81.7 83.2 0.68 0.78 0.82 218.20

1566 330.0 0.3035400 137.0 4.69 2900 79.9 83.1 84.0 0.69 0.79 0.83 217.45415 133.8 4.74 2900 79.7 82.9 84.0 0.68 0.79 0.83 217.45

DXHW13104732 75 100 60000380 163.4 4.63 2890 78.9 82.1 84.0 0.69 0.79 0.83 247.96

1666 361.0 0.3259400 152.8 4.69 2900 79.9 84.1 85.0 0.70 0.80 0.84 247.11415 150.5 4.71 2900 79.9 83.1 84.0 0.69 0.80 0.84 247.11

DXHW13124732 93 125 60000380 195.6 4.74 2890 79.4 83.7 85.0 0.70 0.81 0.85 307.47

1716 378.0 0.3259400 187.5 4.80 2900 80.4 83.9 85.0 0.70 0.80 0.84 306.41415 185.5 4.83 2900 80.5 84.1 85.0 0.69 0.78 0.83 306.41

DXHW13154732 110 150 60000380 228.0 4.75 2900 79.5 84.9 86.0 0.69 0.81 0.85 362.42

1766 397.0 0.3407400 223.0 4.80 2910 80.5 85.9 86.0 0.69 0.80 0.83 361.20415 221.0 4.83 2910 80.7 85.1 86.0 0.70 0.80 0.82 361.20

DXHW13184732 135 180 60000380 266.0 4.80 2900 79.7 85.1 87.0 0.69 0.83 0.87 444.80

1826 419.0 0.3594400 255.8 4.90 2910 80.9 87.1 88.0 0.70 0.82 0.86 443.27415 254.5 4.95 2910 80.7 85.9 87.0 0.70 0.81 0.84 443.27

DXHW13204732 150 200 60000380 303.0 4.80 2900 79.7 84.7 86.0 0.69 0.84 0.88 494.22

1866 433.0 0.3594400 293.5 4.90 2910 80.9 86.1 87.0 0.71 0.81 0.85 492.52415 292.0 4.94 2920 80.9 84.9 87.0 0.70 0.81 0.84 490.83

DXHW13224732 165 225 60000380 335.0 4.89 2900 79.9 84.1 86.0 0.70 0.83 0.87 543.64

1916 451.0 0.3743400 325.0 4.99 2910 81.4 85.6 87.0 0.71 0.81 0.85 541.77415 321.0 5.04 2910 81.1 85.8 87.0 0.71 0.81 0.85 541.77

DXHW13254732 185 250 60000380 376.0 4.89 2900 80.1 85.3 87.0 0.70 0.82 0.86 609.53

1966 472.0 0.3966400 366.0 4.99 2910 81.7 86.9 88.0 0.71 0.81 0.85 607.44415 362.0 5.04 2910 81.4 84.6 86.0 0.71 0.82 0.85 607.44

dxhw6 - dynamix hydro systems

Documents