dst control - airborne day & night imaging
TRANSCRIPT
AIRBORNE DAY & NIGHT IMAGING
The information contained in this document is furnished in confidence. Possession hereof in no way constitutes any rights to use, reproduce or disclosethe document, in whole or in part, except as authorized by DST Control AB. Copyright DST Control AB as per date of issue hereof. All rights reserved.
North American Representative located in Tampa, FL USA
DST CONTROL
OUR PRODUCTS
ConfigurableRapid deliveriesBest price vs. performance ratio – point stability, steady image at long rangeMaximum exportability, no ITARLight-weight
DST CONTROL
PRODUCT CHARACTERISTICS
Manufacturer of UAV systemMainly European customersEverything from small (5-10 employees) to very big (1000+) companiesHigh level of technical competence, hence limited support required
DST CONTROL
OUR CUSTOMERS 200+ gimbal system soldOver 50+ UAV projectsSold in 40+ countriesReturning customersWell known player
The higher demands on the ability to see and detect under difficult conditions, the higher the requirements of pointing stability, detection distance, photon sensitivity and bandwidth
of which follows...
Specialized sensors, micro mechanical precision components, advanced software and electronics hardware, heavier, larger and more complex systems.
DST CONTROL THE CURSE OF PHYSICS
DST CONTROL
OTUS-U250
Our largest gimbal with four axis multi sensor gyro stabilization
New level of stabilization <50 μrad due to a combination of purpose-built high-bandwidth torque motors and geared motors.
Weight from 7-12 kg / 15.43-26.46 lbs
Multiple choice of sensors
DST CONTROL
OTUS-U250
•EO- and IR-cameras•Laser range finders, pointers, etc.•Complete 3 dimensional IMU mounted on the optical bench•Video processor•Video tracker capability•Direct torque drive•Customized for different sensor
configurations
DST CONTROL
OTUS PERFORMANCE
Gimbal system:De-stabilisation:Feedback res.:Weight:Power supply:Com. Interface:Video interface:
2-axis / 4-axis, direct drive< 100 µrad / < 50 µrad0.036°1-10 kg18-36 VDCRS-485PAL, NTSC, HD
SAITIS-640 Thermal Imagers
BROCHURE LINK
DST CONTROL
OTUS ACCESSORIES
OTUS HEL-MOUNTMechanical dampers
OTUS CABLE KITSCables for all your requirements
OTUS HAND CONTROL UNITErgonomic control of the gimbal
Automatic Video Tracker
Geo-location / Geo-tracker
Laser Pointer, Laser Illuminator, Laser Ranged Finder
Low Temperature Option
DST CONTROL
GIMBAL OPTIONS
The Automatic Video Tracking Option means that the OTUS gimbal will have a software function capable of locking the LOS onto a specified object in the image. Hence a moving object on the ground will remain locked onto the centre of the OTUS video or IR image at all times, provided the optical features meet certain requirements.
DST CONTROL
AUTOMATIC VIDEO TRACKER
The Geo-Location Option means that the OTUS gimbal will have a software function capable of outputting the GPS position of the viewed object centred in the video or IR image. For this function to work, it is required that two external sensors are connected to the gimbal:1. An external GPS sensor providing the position of the vehicle (e.g. theposition of the base of the gimbal).2. An external heading source providing the heading of the vehicles (e.g.the heading of the base of the gimbal).
DST CONTROL
GEO-LOCATION
Geo-Tracking Option means that the OTUS gimbal will have a software function capable of locking the LOS onto a GPS geographical position on the ground. Hence the gimbal can be commanded to move to and maintain any given geographical position centred in the image.
This option assumes that the Geo-Location Option is enabled.
DST CONTROL
GEO-TRACKER
Laser Range Finder (50 m to 4000 m): a device used to measure the distance to an object by measuring the time of flight for a laser beam emitted by the sensor and reflected by the object.
Laser Pointer & Laser Illuminator: a device that sends a laser beam to point out an object. The device is available with a wide variety of specifications depending on customer demands.
DST CONTROL
LASER ACCESSORIES
The Low Temperature Option means that the OTUS Gimbal Unit is equipped with an internal heating element to ensure proper operation of payloads that otherwise unable to operate at lower temperature. The lowest possible operating temperature is -40°C.
DST CONTROL
LOW TEMPERATURE
Production•CNC milling machine•FDM machine (3D-printer)•Water cutting machine•Laser engraving / cut
Test envirnoment•Climate chamber•Vibration tabel
DST CONTROLIN-HOUSE DEVELOPMENTPRODUCTION & TESTS
Completely backlash free solution with direct drive for outstanding performance and stability
Complete 3 dimensional IMU mounted on the optical bench
Minimum maintenance requirement, due to novel hybrid drive solution
High bandwidth for vibration attenuation
All electronics embedded within the unit
DST CONTROL
WHY CHOOSE OTUSIntegrated accessories, e.g. laser range finder.
Maximum exportability with worldwide delivery
Lightweight from 1.5 kg / 3.3 lbs
Multiple choice of sensors
Market leading price ratio
Contact Info (North American Rep)
www.uavpropulsiontech.com/dst-control