Download - Wms 450 Schematic Part List
-
8/22/2019 Wms 450 Schematic Part List
1/52
WMS 450
Multichannel System
Schematic & Part List
1-12 Channel
Wolfgang Fritz / Feb. 2008MCS0802001
1
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
2/52
Introduction
SRA2 B/W active directional antenna
For Venues (tour sound &installs) that cover large distances (up to 150m, 500 ft) like
music halls, stadiums and other open air applications.
RA4000 B/W active omni-directional antenna
For Venues without a designated transmitter area and up to 100m/330 ft free line of
sight. Ideal for conference rooms, multi purpose halls, houses of worship etc.
The following schematics will help you to easily set up multi channel systems.
Please use the equipment that is specified in the schematics only.
For your convenience and understanding, weve added technical information and part lists.
You can use this part lists when ordering the system you require! If you need any help
regarding the frequency regulations or if your particular situation doesnt allow for a standard
system to be installed, please do not hesitate to contact us [email protected].
All the WMS450 Systems in this document are designed with active antennas that can
used in all venues with a 20m RG58 antenna cable.
Wolfgang Fritz / Feb. 2008MCS0802001
2
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
3/52
Content
Wolfgang Fritz / Feb. 2008MCS0802001
General Information Page
Receiver/Antenna Placement Information 4
Squelch Information 4
Intermodulation Information 4
Cable Attenuation Information 5
PS4000 dip switch Information 5
AB4000 dip switch Information 5
PS4000 dip Switch Matrix Information 6
Required Component Matrix Information 7
Glossar Information 8
WMS System Antenna Type Page
SRA2 B/W
RA4000 B/W
SRA2 B/W
RA4000 B/W
2 Channel no PS4000
2 Channel no PS4000
1 Channel
Channel1
2
2 Channel RA4000 B/W
SRA2 B/WChannel
SRA2 B/W4
4
Channel no PSU4000
Channel no PSU4000 RA4000 B/W
4
4
5
5
Channel
Channel
Channel
Channel
SRA2 B/W
RA4000 B/W
SRA2 B/W
RA4000 B/W
SRA2 B/W
6 Channel RA4000 B/W
6 Channel
8 Channel SRA2 B/W
8 Channel RA4000 B/W
Channel9
9 Channel10 Channel
10 Channel
SRA2 B/W
RA4000 B/WSRA2 B/W
RA4000 B/W
SRA2 B/W
RA4000 B/W
12
12
Channel
Channel
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part ListSchematic / Part List
Schematic / Part List
Schematic / Part List
Schematic / Part List
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
4345
47
49
51
3
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
4/52
Technical Information
Wireless Basics
Every wireless microphone system has to operate on one specific frequencyTransmitter and receiver of a system need to work on the same frequencyTwo transmitters cannot be used with one receiver at the same time
Receiver/Antenna Placement
Direct line of sight between transmitter and receiver antennaPlace the receiver/antennas at least 5 ft. (1.5 m) away from all transmittersPlace the receiver antennas at least 5 ft. (1.5 m) away from any big metal object,wire(particularly wire mesh) or sheet metal structures, walls, ceilings, etc.Do not place the antennas in hidden places (behind walls)Place the receiver at least 5 ft. (1.5 m) away from any equipment that may emit RFradiation such as lighting racks, fluorescent lamps, digital effect units, or PCs
Squelch
Standard: Carrier squelch, manual Operates strictly on the signal strength of the signal. If received signal strength drops under the adjustable squelch threshold the
audio output is muted
Advanced: Tone Code (only WMS4000)
The audio turns on only in the presence of the correct tone code and anadequate signal strength (-100dbm) Lock out all signals except ones with the correct key.
Intermodulation
Intermodulation is the result of two or more signals of different frequencies beingmixed together, forming additional signals that are not harmonic frequencies ofeither.
By using more than one transmitter simultaneously at the same location, intermodulation
happens in the receiver and/or transmitter. In your case this intermodulation productsare generated in the bandwidth that you are using.
To avoid intermodulating frequencies, we offer you pre-calculated frequencies as presets inthe SR450 and SR4000 Receiver. Please, make sure that when setting up a multi channelsystem, all your receivers are set to the same country preset (NAME) and group. Use theAutomatic channel function (auto setup) to scan for free frequencies at your venue.
Wolfgang Fritz / Feb. 2008MCS0802001
4
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
5/52
RG58 Cable Attenuation (MKPS, MKA5, MKA20 antenna cable)
Cable Attenuation
To obtain the best sound possible, you need to have the right RF input level throughoutyour signal chain. Premium quality wireless systems like the WMS450 and WMS4000,offer you adjustable RF-level settings that garantee to maximise operating distance evenwhen using different cable lenghts and different types of cable! For this purpose, AKGsPS4000W antenna splitter, has 3 dip switches that youll find on the right side of itsfront panel, behind the AKG logo.
PS4000 dip switch
This dip switch reduce the input RF level of the PS4000 between 0 dB and 14 dB.All antenna output level and the cascade(link) output level have an effect on this reduction.
AB4000 dip switch
The AB4000 has a fix 17.5dB amplifier in the output stage. The dip switch reduce theinput RF level of the AB4000 between 0 dB and -14 dB. AB4000 get the DC powerthrough the antenna cable from the PS4000 or an ASU4000 unit.
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
AB4000 Antenna Booster
Wolfgang Fritz / Feb. 2008MCS0802001
Signal level adjustment
InternalAttenuation
Total Gain
3.5 dB
5.5 dB
7.5 dB
9.5 dB
11.5 dB
13.5 dB
15.5 dB
17.5 dB
5
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
6/52
3x MKA 20
60m / 198ft
Antenna Booster
AB4000
necessary !
4x MKA 2080m / 264ft
Antenna Booster
AB4000
necessary !
MKA 5
5m / 16ft
MKA 20
20m / 66ft
MKA 5 + MKA 2025m / 82ft
2x MKA 20
40m / 132ft
Cable type
&
Length
0110E0189
1m / 3ft
PS4000 dip switch matrix (RG58 cable)
RA4000 W SRA2 W RA4000 BW SRA2 BW
Passiv Antennas Active Antennas
Antenna type
&
Gain
0 dB
0 dB 0 dB -4 dB
0 dB -2 dB -14 dB
-8 dB -12 dB
-6 dB -10 dB
0 dB
0 dB -2 dB
RA4000 BW
2x MKA 20
AB4000
0 dB
PS4000
-4 dB
1x MKA 20
SRA2 BW
2x MKA 20
AB4000
0 dB
PS4000
-8 dB
1x MKA 20
RA4000 BW
2x MKA 20
AB4000
0 dB
PS4000
0 dB
2x MKA 20
SRA2 BW
2x MKA 20
AB4000
0 dB
PS4000
0 dB
2x MKA 20
1 dB 4-6 dB 18 dB 22-24 dB
waveUHF Antenna
You have to use this PS4000 dip switch settings at all PS4000 with direct connection
to the antennas.
All cascade PS4000 have the same dip switch setting ON/ON/ON (0dB)
Wolfgang Fritz / Feb. 2008MCS0802001
6
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
7/52
Number of
PS4000 ZAPD-21 MKPS PSU4000
AC12 Power
Supply PSU01/4000
AC12 Power
Supply HUB4000Q
2 1 0 4 0 + 3 1 + 0 1
3 1 0 6 0 + 4 1 + 0 1
4 1 0 8 1 + 0 1 + 0 1
5 1 0 10 1 + 0 1 + 1 1
6 2 0 14 1 + 0 2 + 0 1
7 2 0 16 1 + 0 2 + 0 1
8 2 0 18 1 + 0 2 + 0 1
9 2 0 20 1 + 0 2 + 1 2
10 3 0 24 1 + 0 3 + 0 2
11 3 0 26 1 + 0 3 + 0 2
12 3 0 28 1 + 0 3 + 0 2
13 3 0 30 1 + 1 3 + 1 2
14 4 2 36 2 + 0 4 + 0 2
15 4 2 38 2 + 0 4 + 0 2
16 4 2 40 2 + 0 4 + 0 217 4 2 42 2 + 0 4 + 1 3
18 4 2 44 2 + 0 4 + 2 3
19 5 2 52 2 + 0 5 + 0 3
20 5 2 54 2 + 0 5 + 0 3
21 5 2 56 2 + 0 5 + 1 3
22 5 2 58 2 + 0 5 + 2 3
23 6 2 62 2 + 0 6 + 0 3
24 6 2 64 2 + 0 6 + 0 3
25 6 2 66 2 + 1 6 + 1 4
26 6 2 68 2 + 2 6 + 2 4
32 9 0 80 3 + 0 9 + 0 4
36 9 0 88 3 + 4 9 + 4 5
48 13 0 120 5 + 0 13 + 0 6
52 13 0 128 5 + 2 13 + 4 6
Additional you will need min. 2x antennas and 2x MKAxx antenna cables!
Please, look at the "PS4000 dip switch matrix (RG58)" to find your antenna components.
PSU01/4000 is a 12V/2A Power Supply Adapter (1x PSU4000 = 3x PSU01/4000)
WMS
Receiver
Standard Power Supply! only available in US !
Power Supply
Wolfgang Fritz / Feb. 2008MCS0802001
WMS450/4000 Component Matrix
7
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
8/52
Glossar
SR4000 WMS4000 Stationary Receiver
PS4000W Power Splitter 1:4 (Distribute RF signal and DC Power)
Splits 1 antenna to 4 receiver
Antenna cascade(Link) output to send RF-Signal to next PS4000.
Cascade max. 3 PS4000.
If you need more than 12 channels use an ZAPD in front of the first PS4000.
PSU4000 Power Supply Unit with 3x 12 volt outputs (2.5A and 2A)
SRA2 B/W Active Directional Antenna (21dB Gain)
RA4000 B/W Active Omni-directional Antenna (18dB Gain)
HPA4000 Headphone Amplifier (8x stereo jack inputs, 1 HP output)
CU400 Charging Unit for WMS400/450 (2 transmitter / unit)
ZAPD-21 Passive Combiner 2:1 and 1:2
MKPS 0.65m/2 feet RG58 antenna cable
MKA20 20/66ft RG58 antenna cable
ASU4000 Antenna Supply Unit
Supplies up to three active elements (RA4000BW, SRA2BW, AB4000)
0110E01890 Front assembly cable
Install wave antennas at the front of the rack
AB4000 Antenna Booster
3.5 dB 17.5 dB amplifier
Front assembly cable & wave antenna
Wolfgang Fritz / Feb. 2008MCS0802001
Cable
MKA5 5m/16ft RG58 antenna cable
SR4000
XLR
AUDIO OUT
ANT A IN
DC IN (12V/0.5A)
TS
AUDIOOUT
ANTB IN
Mixer
DATA
LOGIC OUT
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT1 (2.5A)
AC POWER
PSU4000
DC OUT 2 (2A)
DC OUT 3 (2A)~90-230V
SRA2 B/W
ANTOUT
RA4000 B/W
ANTOUT
HPA4000
DCIN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
CU4000
DC IN (12V/1.4A)
ZAPD-21
A
S
B
ASU4000
ANTOUT
ANTIN
DC IN (12V/0.5A)
AB4000
ANTOUT
ANTIN
HUB4000QD C IN ( 1 2 V/ 0. 5A ) E TH ER NE T
DEV1
DEV2
DEV3
DEV4
DEV5
DEV6
DEV8
DEV7
HUB4000Q Network Concentrator for 8 devices (SR4000 or SST4) Operate with Harman System Architect software - http://hiqnet.harmanpro.com
8
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
9/52
2 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
1 channel WMS450 system(SRA2 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
K171 Studio Headphone
Headphone amplifier (optional)
1 Channel WMS450 System
With directional antennas & 40m antenna cable (132 feet)
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
ASU4000
ANTOUT
ANTIN
DC IN (12V/0.5A)AC12 Power Supply (500mA)
ASU4000
ANTOUT
ANT IN
DC IN (12V/0.5A)AC12 Power Supply (500mA)
2xMKPS
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
2x MKA20
(BNC I-connector is necessary to link cables!)
2x MKA20
(BNC I-connector is necessary to link cables!)
SRA2 B/W
ANTOUT
SRA2 B/W
ANT OUT
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTB IN
Mixer
9
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
10/52
Wolfgang Fritz / Feb. 2008MCS0802001
units description comment code
1 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
2 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
4 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 10 Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter 3009Z0010
2 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
1 Channel WMS450 System with directional antennas, no PSU4000, no PS4000
Optional Components (Charging System & Headphone Amplifier)
CU 400
SRA 2 B/W
WMS 450
MK PS
MKA 20
HPA 4000/ none
K171 Studio
AC 12
ASU 4000 (BNC/none)
AC 12
10
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
11/52
2 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
1 channel WMS450 system(RA4000 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
K171 Studio Headphone
Headphone amplifier (optional)
1 Channel WMS450 System
with omni-directional antennas & 25m antenna cable (82 feet)
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
RA4000 B/W
ANTOUT
RA4000 B/W
ANT OUT
ASU4000
ANTOUT
ANTIN
DC IN (12V/0.5A)AC12 Power Supply (500mA)
ASU4000
ANTOUT
ANT IN
DC IN (12V/0.5A)AC12 Power Supply (500mA)
2xMKPS
BNC I-connectorAvailable e.g. www.rs-components.com,
Ordernumber 112-1798
BNC I-connectorAvailable e.g. www.rs-components.com,
Ordernumber 112-1798
1x MKA20 + 1x MKA5
(BNC I-connector is necessary to link cables!)
1x MKA20 + 1x MKA5
(BNC I-connector is necessary to link cables!)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTB IN
Mixer
11
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
12/52
units description comment code
1 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
2 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
4 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 10 Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter 3009Z0010
2 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
1 Channel WMS450 System with omni-directional antennas, no PSU4000, no PS4000
Optional Components (Charging System & Headphone Amplifier)
CU 400
RA 4000 B/W
WMS 450
MK PS
MKA 20
HPA 4000/ none
K171 Studio
AC 12
ASU 4000 (BNC/none)
AC 12
Wolfgang Fritz / Feb. 2008MCS0802001
12
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
13/52
2 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
2 channel WMS450 system(SRA2 B/W Antennas, no PS4000, PSU4000)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
4xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
2 Channel WMS450 System
With directional antennas & 40m antenna cable (132 feet)
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
AC12 Power Supply (500mA) AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
ZAPD-21
A
S
B
ZAPD-21
A
S
B
ASU4000
ANTOUT
ANTIN
DC IN (12V/0.5A)AC12 Power Supply (500mA)
ASU4000
ANTOUT
ANT IN
DC IN (12V/0.5A)AC12 Power Supply (500mA)
2xMKPS
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
2x MKA20
(BNC I-connector is necessary to link cables!)
2x MKA20
(BNC I-connector is necessary to link cables!)
SRA2 B/W
ANTOUT
SRA2 B/W
ANT OUT
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIOOUT
ANTB IN
Mixer
SR450
XLR
AUDIO OUT
ANT A IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTB IN
Mixer
13
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
14/52
units description comment code
2 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
6 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
4 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 10 Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter 3009Z0010
2 4 12V AC-A dapt er for 1 P S 4000, ASU4000, HUB 4000, HPA 4000 or S R 4000. 7801H000
2 88 passive power combiner (2in 1out) or Splitter (1in 2out) SERVSON76
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitor ing amplif ier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
1 412V AC-A dapt er for 1 P S 4000, ASU4000, HUB 4000, HPA 4000 or S R 4000. 7801H000
2 Channel WMS450 System with directional antennas, no PSU4000, no PS4000
Optional Components (Charging System & Headphone Amplifier)
CU 400
SRA 2 B/W
WMS 450
MK PS
MKA 20
HPA 4000/ none
K171 Studio
AC 12
ASU 4000 (BNC/none)
AC 12
ZAPD21
Wolfgang Fritz / Feb. 2008MCS0802001
14
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
15/52
2 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
2 channel WMS450 system(RA4000 B/W Antennas, no PS4000, PSU4000)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
4xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
2 Channel WMS450 System
with omni-directional antennas & 25m antenna cable (82 feet)
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
AC12 Power Supply (500mA) AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
RA4000 B/W
ANTOUT
RA4000 B/W
ANT OUT
ZAPD-21
A
S
B
ZAPD-21
A
S
B
ASU4000
ANTOUT
ANTIN
DC IN (12V/0.5A)AC12 Power Supply (500mA)
ASU4000
ANTOUT
ANT IN
DC IN (12V/0.5A)AC12 Power Supply (500mA)
2xMKPS
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
BNC I-connector
Available e.g. www.rs-components.com,
Ordernumber 112-1798
1x MKA20 + 1x MKA5
(BNC I-connector is necessary to link cables!)
1x MKA20 + 1x MKA5
(BNC I-connector is necessary to link cables!)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIOOUT
ANTB IN
Mixer
SR450
XLR
AUDIO OUT
ANT A IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTB IN
Mixer
15
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
16/52
units description comment code
2 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
6 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 56 16.5 ft. (5m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 2455Z0062
2 10 Antenna Supply unit for long antenna cables (BNC connector) without AC-Adapter 3009Z0010
2 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
2 88 passive power combiner (2in 1out) or Splitter (1in 2out) SERVSON76
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
Optional Components (Charging System & Headphone Amplifier)
2 Channel WMS450 System with omni-directional antennas, no PSU4000, no PS4000
CU 400
RA 4000 B/W
WMS 450
MK PS
MKA 20
HPA 4000/ none
K171 Studio
AC 12
ASU 4000 (BNC/none)
AC 12
ZAPD21
MKA 5
Wolfgang Fritz / Feb. 2008MCS0802001
16
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
17/52
2 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
2 channel WMS450 system(SRA2 B/W An tennas, no PSU4000)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
4xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
2 Channel WMS450 System
with directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-12dB
2xMKA20
(40m Cable)
-2dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SRA2 B/W
ANT OUT
SRA2 B/W
ANT OUT
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
AC-CU4000 Power Supply (1.4A) (recommend) orAC12 Power Supply (500mA)
AC12 Power Supply (500mA)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
17
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
18/52
units description comment code
2 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....
1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
4 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 7 12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 7801H000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
2 Channel WMS450 System with directional antennas, PSU4000
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
SRA 2 B/W
WMS 450
PS 4000W
MK PS
MKA 20
HPA 4000/ none
K171 Studio
AC 12
AC-CU 4000
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
18
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
19/52
2 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
2 channel WMS450 system(RA4000 B/W Antennas, no PSU4000)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
2 Channel WMS450 System
with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-8dB
2xMKA20
(40m Cable)
0dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
RA4000 B/W
ANTOUT
RA4000 B/W
ANTOUT
AC-CU4000 Power Supply (1.4A) (recommend) orAC12 Power Supply (500mA)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
19
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
20/52
units description comment code
2 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
4 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 7 12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 7801H000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code1 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
2 Channel WMS450 System with omni-directional antennas, no PSU4000
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
RA 4000 B/W
WMS 450
PS 4000W
MK PS
MKA 20
HPA 4000/ none
K171 Studio
AC 12
AC-CU 4000
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
20
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
21/52
4 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
4 channel WMS450 system(SRA2 B/W An tennas, no PSU4000)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
4 Channel WMS450 System
with directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-12dB
2xMKA20
(40m Cable)
-2dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SRA2 B/W
ANT OUT
SRA2 B/W
ANT OUT
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
AC-CU4000 Power Supply (1.4A)
AC12 Power Supply (500mA)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
21
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
22/52
units description comment code
4 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....
1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
8 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 7 12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 7801H000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code2 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
4 Channel WMS450 System with directional antennas, no PSU4000
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
SRA 2 B/W
WMS 450
PS 4000W
MK PS
MKA 20
HPA 4000/ none
K171 Studio
AC 12
AC-CU 4000
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
22
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
23/52
4 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
4 channel WMS450 system(RA4000 B/W Antennas, no PSU4000)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
4 Channel WMS450 System
with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-8dB
2xMKA20
(40m Cable)
0dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
AC12 Power Supply (500mA)
AC-CU4000 Power Supply (1.4A)
AC12 Power Supply (500mA)
RA4000 B/W
ANTOUT
RA4000 B/W
ANTOUT
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
23
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
24/52
units description comment code
4 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....
1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
8 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 7 12V AC-Adapter (EU-Version) power supply CU4000, PS 4000 7801H000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code2 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
1 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
4 Channel WMS450 System with omni-directional antennas, no PSU4000
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
RA 4000 B/W
WMS 450
PS 4000W
MK PS
MKA 20
HPA 4000/ none
K171 Studio
AC 12
AC-CU 4000
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
24
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
25/52
4 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
4 channel WMS450 system(SRA2 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
4 Channel WMS450 System
with directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-12dB
2xMKA20
(40m Cable)
-2dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SRA2 B/W
ANT OUT
SRA2 B/W
ANT OUT
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
25
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
26/52
units description comment code
4 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
8 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code2 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
4 Channel WMS450 System with directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
SRA 2 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
26
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
27/52
4 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
4 channel WMS450 system(RA4000 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
4 Channel WMS450 System
with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-8dB
2xMKA20
(40m Cable)
0dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
RA4000 B/W
ANT OUT
RA4000 B/W
ANT OUT
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
27
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
28/52
units description comment code
4 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
8 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code2 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
4 Channel WMS450 System with omni-directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
RA 4000 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
28
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
29/52
6 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
5 channel WMS450 system(SRA2 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
10xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
5 Channel WMS450 System
with directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-12dB
2xMKA20
(40m Cable)
-2dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SRA2 B/W
ANT OUT
SRA2 B/W
ANT OUT
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
29
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
30/52
units description comment code
5 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
10 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code3 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
5 Channel WMS450 System with directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
SRA 2 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
30
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
31/52
6 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
5 channel WMS450 system(RA4000 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
10xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
5 Channel WMS450 System
with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-8dB
2xMKA20
(40m Cable)
0dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
RA4000 B/W
ANT OUT
RA4000 B/W
ANT OUT
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
31
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
32/52
units description comment code
5 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....1 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
10 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code3 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
5 Channel WMS450 System with omni-directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
RA 4000 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
32
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
33/52
6 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
6 channel WMS450 system(SRA2 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
4xMKPS
2xMKPS
6 Channel WMS450 System
with directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-12dB
2xMKA20
(40m Cable)
-2dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
up
down
0dB
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
1A
1B
2A
2B
3A
3B
4B
4A
ANT AIN ANT B IN
DCIN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SRA2 B/W
ANT OUT
SRA2 B/W
ANT OUT
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
33
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
34/52
units description comment code
6 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
14 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code3 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
6 Channel WMS450 System with directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
SRA 2 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
34
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
35/52
6 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
6 channel WMS450 system(RA4000 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
4xMKPS
2xMKPS
6 Channel WMS450 System
with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-8dB
2xMKA20
(40m Cable)
0dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
up
down
0dB
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
RA4000 B/W
ANT OUT
RA4000 B/W
ANT OUT
1A
1B
2A
2B
3A
3B
4B
4A
ANT AIN ANT B IN
DCIN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
35
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
36/52
units description comment code
6 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
14 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code3 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
6 Channel WMS450 System with omni-directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
RA 4000 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
36
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
37/52
8 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
8 channel WMS450 system(SRA2 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
8xMKPS
2xMKPS
8 Channel WMS450 System
with directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-12dB
2xMKA20
(40m Cable)
-2dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
up
down
0dB
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
1A
1B
2A
2B
3A
3B
4B
4A
ANT AIN ANT B IN
DCIN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SRA2 B/W
ANT OUT
SRA2 B/W
ANT OUT
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
37
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
38/52
units description comment code
8 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
18 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code4 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
8 Channel WMS450 System with directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
SRA 2 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
38
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
39/52
8 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
8 channel WMS450 system(RA4000 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
8xMKPS
2xMKPS
8 Channel WMS450 System
with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-8dB
2xMKA20
(40m Cable)
0dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
up
down
0dB
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
RA4000 B/W
ANT OUT
RA4000 B/W
ANT OUT
1A
1B
2A
2B
3A
3B
4B
4A
ANT AIN ANT B IN
DCIN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A) TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
SR450
XLRAUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANTBIN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANTBIN
Mixer
39
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
40/52
units description comment code
8 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
18 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code4 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
1 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
8 Channel WMS450 System with omni-directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
RA 4000 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
40
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
41/52
10 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
9 channel WMS450 system(SRA2 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
8xMKPS
2xMKPS 2xMKPS
AC12 Power Supply (500mA)
9 Channel WMS450 System
with directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-12dB
2xMKA20
(40m Cable)
-2dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
up
down
0dB
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SRA2 B/W
ANTOUT
SRA2 B/W
ANT OUT
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLRAUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLRAUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)TS
AUDIO OUT
ANT B IN
Mixer
41
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
42/52
units description comment code
9 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 72 External directional active "paddle" antenna with amplifier (2 req.) 3009Z0001
20 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
2 BNC I-connector EXTERNAL !! Not available at AKG - BNC I-Connector
(you can buy it at www.rs-components.com, Ordernumber 112-1798)
units description comment code5 35 Charging unit for WMS 400 transmitters, AC adapters included 2934Z000
2 45 Headphone monitoring amplifier-8 receivers ins; & selectable out without AC Adapter 2998Z0004
1 85 Closed-back circum-aural dynamic stereo headphone, mini XLR connector, detachable cable 2908Z0001
2 4 12V AC-Adapter for 1 PS 4000, ASU4000, HUB 4000, HPA 4000 or SR 4000. 7801H000
9 Channel WMS450 System with directional antennas
Optional Components (Charging System & Headphone Amplifier)
Additional parts for 40m(132feet) Antenna Cable
CU 400
SRA 2 B/W
WMS 450
PS 4000W
MK PS
MKA 20
PSU 4000
HPA 4000/ none
K171 Studio
AC 12
MKA 20
Wolfgang Fritz / Feb. 2008MCS0802001
42
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
43/52
10 HT450 or PT450 charging system (optional)
Project
Designer
Date Revision
9 channel WMS450 system(RA4000 B/W Antennas)
Wolfgang Fritz
02.02.2008 1.0
Build document1.0
Ref.No.MCS0802001
MKA20MKA20
8xMKPS
K171 Studio Headphone
Headphone amplifier (optional)
8xMKPS
2xMKPS 2xMKPS
AC12 Power Supply (500mA)
9 Channel WMS450 System
with omni-directional antennas & 20(40)m antenna cable (66 or132 feet)
up
down
-8dB
2xMKA20
(40m Cable)
0dB
1xMKA20(20m Cable)
40m / 132 ft Version:
2x MKA20
BNC I-connector is necessary to link cables!
Available e.g. www.rs-components.com,
Ordernumber 112-1798
up
down
0dB
Rear View
4x Antenna A output(DC power)
Antenna A input Ant. B
Antenna A cascade output
(DC power)
dip switches behind AKG Logo
Signal level adjustment
Attenuation
PS4000W Power Splitter
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
DC OUT 1 (2.5A)
AC POWER
PSU4000
DC OUT2 (2A)
DC OUT3 (2A)~90-230V
HPA4000
DC IN (12V/0.5A) Headphone
SR1
SR2
SR3
SR4
SR5
SR6
SR8
SR7
RA4000 B/W
ANTOUT
RA4000 B/W
ANT OUT
1A
1B
2A
2B
3A
3B
4B
4A
ANT A IN ANT B IN
DC IN (12V/0.5A)
PS4000W
CASCADE A
CASCADE B
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
5V Power Supply (1.4 A)
CU400
DC IN (5V/1.4A)
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLRAUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIO OUT
ANTA IN
DC IN (12V/0.5A)TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
SR450
XLRAUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TSAUDIO OUT
ANT B IN
Mixer
SR450
XLR
AUDIOOUT
ANTA IN
DC IN (12V/0.5A)
TS
AUDIO OUT
ANT B IN
Mixer
43
loaded from www.Manualslib.commanuals search engine
http://www.manualslib.com/http://www.manualslib.com/ -
8/22/2019 Wms 450 Schematic Part List
44/52
units description comment code
9 73 PT 450 or HT 450 transmitter; SR 450 receiver, with AC adapter, rack mount kit, mic holder,
batteries, user's manual; carrying case
3235X....
3236X....
3237X....
3238X....
3239X....2 59 Wide band antenna multi coupler (4+1 out) without AC-Adapter 2996Z0008
2 66 External omni-directional active dipoleantenna with amplifier (2 req.) 2632Z0030
20 54 Connecting cable for PS to SR 2.15ft (65cm) 6000H0206
2 55 66 ft. (20m) Cables for connecting ext. antennas to multi-couplers (2 req.) KOAX RG58 6000H0205
1 60 Central Power supply unit for powering up to 3 WMS 4000 HUB 4000, HPA 4000, CU 4000 or up
to 12 receivers via PS 4000, Mains Cable
2997Z000
2 55 66 ft. (20m)