Transcript
Page 1: W4600H Washer Electrolux JayWash RJ brochure - Richard Jay

Washer ExtractorW4600H

• With Clarus Control program

• Fully programmable microprocessor

• All relevant wash parameters can be programmed

• Programming from key pad or downloading via memory card

• 350G High extraction force for effi cient dewatering

• Frequency-controlled motor for optimal washing

• Supplied with 8 + 5 signals for liquid detergents

• Eight connections for liquid detergents

• Large door opening for easy loading and unloading

• All critical parts made from stainless steel to provide a

high

• Level of corrosion resistance

• Powder painted galvanised steel side panels

• Bearing seals lubricated with oil to ensure a long service

life

Low energy consumptionfor optimal effi ciency

• Front mounted loading hopper

• Forward or forward/backward tilting with full reversing

• function

• Test tap with level tube

• Two drain valves for recovering water/wash solution

• Five-compartment injector for powder detergent

• (located at the front or on the right hand side of the

machine)

• IS – Integrated Saving

• Connection for intelligent detergent system (DMIS)

• Connection to CMIS

Features

Main options

Richard Jay is proud to supply superior-quality laundry

equipment from Swedish manufacturer Electrolux.

Electrolux Professional develops the world’s most

sustainable and fl exible laundry solutions while striving

to continuously improve functionality, productivity

and ergonomics.

When you partner with Richard Jay for laundry

equipment, you can feel confi dent you’re dealing

with one of Australia’s largest and most respected

suppliers. Our family-owned business is the only B2B

laundry provider with a truly national footprint.

NATIONWIDE 1300 RICHARD (742 427) - www.richardjay.com.auest. 1969

Page 2: W4600H Washer Electrolux JayWash RJ brochure - Richard Jay

Main Specifications W4600HMax. capacity ratio 1:10 - 1:9 60 kg/132 lb - 65 kg/135 lb

Drum volume

diameter

600 L

980 mm

Extraction 800 rpm

G-factor 350

Heating alternatives standard 36/54 kW

Low energy -

Steam -

Consumption data “Normal 60°C” * (Economy) El 36kW | 54 kW Steam

Total time (cold + hot /cold) 48 | 46 min 44/49

Water consumption (cold/hot) 555/92 L 555/92 L

Energy consumption (motor/heating) 1.2/4.7 kWh 1.2/- kWh

Steam consumption (cold/hot) - 7 kgSteam consumption (cold) 14 kg

* Water temperature 15°C cold water and 65°C hot water ** Depending on steam pressure

Electrical connections*

Heating Voltage Total power (Recommended

El 380-415V 3N 50 Hz 38 (63) kW(A)

Steam or non-heated 230V 3AC 50 Hz 4 (16) kW(A)* Other voltages available, see installation manual.

Water, steam and air connection

Water valves 1 In 1x Hot & 1x Cold

Water pressure 200-600 kPa

Capacity at 300 kPa 110 l/min

Drain valve 110 mm

Draining capacity 400 l/min

Steam valve 3/4 In

Steam pressure 300 - 600 kPa

Five-compartment detergent injector 3/4 In

Floor requirements

Frequency of the dynamic force 13.3 Hz

Floor load at max extraction 16.9 ± 1.4

Sound levels

Sound level 76 dB(A)

Sound level with insulation < 70 dB(A)

Heat emission

% of installed power, max 6

Weight

net, kg 1380 kg

Shipping volume m³ 5.7 m³

NATIONWIDE 1300 RICHARD (742 427) - www.richardjay.com.auest. 1969


Top Related