Orion Telecom Networks Inc. 2005
VCL-T1 DACSVCL-T1 DACS8 Port, T1 Digital Access Cross Connect Switch8 Port, T1 Digital Access Cross Connect Switch
Slide 1
Updated : January 1st, 2005
16810, Avenue of Fountains, Suite # 108,Fountain Hills, AZ 85268, U.S.A.
Phone: +1 (480) 816-8672Fax: +1 (480) 816-0115
E-mail: [email protected] Site: http://www.oriontelecom.com
Orion Telecom Networks Inc. 2005
VCL-T1 DACSVCL-T1 DACS
Product OverviewProduct Overview
T1 Digital Access Cross Connect Switch
• 4 Ports, T1 Digital Access Cross
Connect Switch
• 8 Ports, T1 Digital Access Cross
Connect Switch
• Offers full cross-connect functionality to cross-connect, and / or
aggregate DS-0s, Nx56/64Kbps consecutive data channels and, Fractional T1 channels to full T1 channels.
• Uni-directional Monitoring• Bi-directional Monitoring• Non - Obstructive Monitoring Application
Combine traffic from partially - utilized facilities onto a single fully - utilized T1
Slide 2
Orion Telecom Networks Inc. 2005
• ISP - Providing Fractional T1s to Subscribers
• Data - Aggregating Fractional T1 Data Circuits
• Monitoring & Billing - Non-Obstusive Line Traffic
Monitoring for “Listen-Only” and Billing Applications
• Cellular - Extending Fractional T1 ports from MTSO to Cell-Sites.
APPLICATIONS:APPLICATIONS:
• Remote TCP/IP Access for configuration and Monitoring.
• Windows based User Friendly GUI for easy configuration.
• Available in 4 Port & 8 Port configuration.
• Low Cost.
HIGHLIGHTS:HIGHLIGHTS:
VCL-T1 DACSVCL-T1 DACS
Slide 3
Orion Telecom Networks Inc. 2005
• Provides DS0, "n"x64Kbps and Fractional T1 grooming for up to 8 T1 ports.• Rear Access • Windows 95 based GUI, Software configurable • Easy to use• Configurable from 4, T1 ports to 8, T1 ports depending on user requirements.• LED Indications on the front panel for alarms and status.
FEATURESFEATURES
• Reduce access costs by combining partially loaded T1s onto a single T1. • Rear access wiring. Improves wiring and cable management.• Support Nx56/64kbps fractional T1 operation and grooming.• Can be ordered for (non - obtrusively) connecting to monitoring/billing
equipment for Live - Traffic monitoring and cross connect functions.• Easy to install and simple to use.
BENEFITSBENEFITS
VCL-T1 DACSVCL-T1 DACS
Slide 4
Orion Telecom Networks Inc. 2005
ISP Digital Cross Connect Application
Providing Fractional T1s’ to Subscribers
InternetT1 Digital Access
Cross Connect
Fractional T1
Fractional T1
Fractional T1
RouterVCL - T1 DACS
Fractional T1, Channels
upto 7,VCL - T1 DACS
Aggregates upto 7, FractionalT1 Channels to a Single T1
VCL-T1 DACSVCL-T1 DACS
Slide 5
Orion Telecom Networks Inc. 2005
Cell Site
VCL - T1 DACSDigital AccessCross Connect
Cell Site
Cell Site
Cell SiteCell SiteCell Site
MTSOSwitch
Backhaul - Cellular Application using VCL-DACS
VCL-T1 DACSVCL-T1 DACS
Slide 6
Orion Telecom Networks Inc. 2005
Equipment - B
Combine traffic from partially - utilized facilities onto a single fully - utilized T1Non - Obstructive Monitoring Application
VCL-T1 DACSVCL-T1 DACS
Uni-directional Monitoring
To monitor an T1 link in a single direction, you will need to connect ONE high impedance T1, RX pair of the DACS, as it is only the Rx (RECEIVE) pair that is capable of listening. Please leave the Tx (TRANSMIT) pair un-connected.
T1Rx
TxRx
Tx
T1
Equipment - A
Monitoring Point
Monitoring Equipment
Rx
Tx
T1 DACSRxTx
T1Port # 1
RxTxT1
Port # 8
XNC
Slide 7
Orion Telecom Networks Inc. 2005
VCL-T1 DACSVCL-T1 DACS
Bi-directional Monitoring
Equipment - B
T1Rx
TxRx
Tx
T1
Equipment - A
Monitoring Point
T1 DACSRxTx
T1Port # 1
RxTxT1
Port # 8
XNC
XNC
RxTx
RxTx
T1Port # 7
To monitor an T1 link in both directions, you will need to connect TWO high impedence T1, RX pairs of the DACS, i.e. use 2, Hiz T1 ports.
Monitoring Equipment
Slide 8
Orion Telecom Networks Inc. 2005
Front View of the Shelf
78 6 5 4 3 2 1
VCL-T1 DACSDigital AccessCross Connect
ERR +5V -48V
Rear View of the ShelfRJ-45 Version
VCL-T1 DACSVCL-T1 DACS
100 Ohms, RJ-45, T1 InterfaceConnectors - 8, T1 channels
J1J2J3J4J5J6J7J8
Slide 9
Orion Telecom Networks Inc. 2005
TECHNICALTECHNICAL SPECIFICATIONSSPECIFICATIONS
System Management
Windows 95 /Windows 98 based GUI,
Alarm Contact Closures
2 Alarms Relays,
Type - Form "C" relay,
Temperature
Operating 00C to 500C
Humidity 5% to 95% Non-Condensing
VCL-T1 DACSVCL-T1 DACS
Mechanical Specification
Width : 480mmDepth : 280mmHeight : 90 mmWeight : 4.20 Kg.
T1 Interface
Line Rate T1 (1.544 Mbps ± 50 bps)
Available Time-Slots 1-24
Framing Structure as per ITU(CCITT) G.704
Framing Options D4, ESF, SLC96 (Selectable)
Line Coding AMI, B8ZS (Selectable)
Electrical ITU-T G.703
Jitter ITU-T G.823, ITU-T 1.431
Impedance 100 Ohm
Connector Wire-Wrap or RJ-45 (optional)
RJ-45 (female) extension cords, optional.
Power Consumption
Power Consumption 10 Watt
Slide 10
Orion Telecom Networks Inc. 2005
Orion’s Orion’s ProductsProducts
E1, Voice & Data Drop-Insert Multiplexer
PRI ISDN (Q.931) Multiplexers
E1 Intelligent Channel Banks
E1 / T1 DCME (Digital Circuit Multiplication Equipment) - Voice Compression Equipment
Thin Route DCME
E1 / T1 Echo Cancellers
E1 / T1 Digital Cross Connect
T1 / E1 Converters
E3, 34Mbps Multiplexer
34Mbps Optical Line Transmission Equipment (OLTE)
STM 1 / STM 4 - SDH Equipment
Remote Asset Management Systems
Slide 11
VCL-T1 DACSVCL-T1 DACS
Orion Telecom Networks Inc. 2005
Thank you for your attentionThank you for your attention
For more details visit us at our Web Site at
http://www.oriontelecom.com
16810, Avenue of Fountains, Suite # 108,Fountain Hills, AZ 85268, U.S.A.
Phone: +1 (480) 816-8672 Fax: +1 (480) 816-0115E-mail: [email protected]
Slide 12
VCL-T1 DACSVCL-T1 DACS