Upgrade your stretch packaging technology to reduce cycle times and lower film costs
Signode Service Business
Signode Service Business Toll Free: [email protected]
©2016 SIGNODE SPD1839 07-20-16
CONVERSION PACKAGE
Z-20 LumberCut, Clamp and Seal
Cutter and heater pad assembly
Clamp
Cut, Clamp and Seal ConversionThe Cut, Clamp and Seal conversion for SpiralGrip and Cobra stretch packaging systems introduces enhanced sealing technology to make your stretch film equipment more cost efficient and effective.
This new system replaces the roping and heat seal mechanism that was standard on these machines. By eliminating the need to create a rope of film at the end of each cycle, the new system enables two fewer revolutions per load, reducing cycle times and lowering film costs.
Conversion Benefits• Reduced cycle time• Increased throughput• Reduced film usage and cost• Less maintenance than roping systems• Fewer components that require no adjustments• Ready availability of parts
The Cut, Clamp and Seal conversion can be quickly fitted to the SpiralGrip 5100, 6100, 7150 & 8150 models as well as Cobra 5 and 6 models, and may also work with the SpiralGrip 2100 model depending on package orientation.
Signode Service Business
Typical conversion package includes:• Cutter• Clamp• Heater pad assembly
In most cases, the machine’s existing PLC can be utilized for required programming. If the Existing PLC is obsolete or incompatible, upgrades are also available.
CONVERSION PACKAGE
Z-20 LumberCut, Clamp and Seal
