Download - Upendrasinh Project 60 Pages
-
8/8/2019 Upendrasinh Project 60 Pages
1/78
1.1 INTRODUCTION
1
-
8/8/2019 Upendrasinh Project 60 Pages
2/78
EKC is a public ltd. Company is established on 31-12-2005 in
Gandhidham. The company chairman and managing director is Mr. P.K.
Khurana.
EKC was the first company having in arrangement. Its there
manufacturing plan in India, Aurangabad, Tarapur and gandhidham.
EKC has capacity to produce cylinder from 1-280 litters water
capacity and working pressure form 150-400. it is number one industry in Asia in
manufacturing cylinder. Main branch of EKC in MUMBAI.
1.2 COMPANY PROFILE
NAMEEVEREST KANTO CYLINDER
LIMITED
ADDRESS SURVEY NO. 141/1/2 &142/1,
2
-
8/8/2019 Upendrasinh Project 60 Pages
3/78
NATIONAL HIGHWAY8-A(EAST)
VARSANA,
P.O. FOPALPURI,
TALUKA- ANJAR.DIST: GANDHIDHAM-370 240
PHONE NO. 02836-306800/305117
3
-
8/8/2019 Upendrasinh Project 60 Pages
4/78
FAX NO. 02836-299626
EMAIL I.D. [email protected]
ACCOUNTING YEAR 1ST APLIL TO 31ST MARCH
ESTABLISHED YEAR 31/12/2005
VICE PRESIDENT DHANJAY J JOSHI
REGISTERED OFFICE
204, RAHEJA CENTRE, FREE
PRESS JOURNAL MARG, 214,
NAREMAN POINT,
MUMBAI 400 021
HISTORY & DEVELOPMENT
EKC is one of the Indias most successful family enterprises, with a
wide ranging portfolio spanning property, manufacturing, media, cylinder,
hospitality, leisure and recreation.
Established as EVEREST KANTO CYLINDER the company is
recognized through well established chain of ICDs- the Thar Dry Port. Thar Dry
Port is one of its kinds in offering the ICD servicing. Pioneering to be 1st
privatized ICD, it plans to expand it service stream from single operational
location at Jodhpur to multiple strategic locations through global network.
4
-
8/8/2019 Upendrasinh Project 60 Pages
5/78
Immediate expansion of chain of ICDs should be Ahemdabad,
Jaipur by 2008, and Bilwara 1st quarter 2009. Other strategic location would be
on the plan.
5
-
8/8/2019 Upendrasinh Project 60 Pages
6/78
Extravagant strength of 200 owned fleets which calibrate to a
potential of 1000 fleet through transportation network enable HSPCL to deliver
transport solutions in time.
1.4 SIZE OF THE UNIT
The size of the any organisation can be determine on many base
the imported parameters for fixing the size of the unit have been quantum of
investment and no. of employee .
EKC company situated at version of gandhidham. It is located 100 Acers
on the base of investment Santana the scale of the organisation would be graded
as shown under :
Company Small scale:total investment 25lakh but dose not exceed 5 cr.
Medium scale company: total investment between 5-10 cr.
Large scale company: total investment more than 10 cr.
6
-
8/8/2019 Upendrasinh Project 60 Pages
7/78
The investment of EKC more than 300 cr. Therefore it is a large scale company.
7
-
8/8/2019 Upendrasinh Project 60 Pages
8/78
1.5 PRODUCT AND THEIR MANUFACTURING PROCESS1.5 PRODUCT AND THEIR MANUFACTURING PROCESS
The EVEREST KANTO CYLINDER LIMITED
company produces manly 4 types of cylinder.
(1) Cylinders for compressed industrial
gases
(2) Cylinders for CNG vehicles
(3) Seamless cylinders for fire-fighting
and beverage applications
(4) Medical cylinder
(1) Cylinders for compressed industrial gases:-
The gas industry relies heavily on cylinders to store and transport gases.
Because the cylinders are liked with gases under high pressure,. They can bevolatile. So they must be enough to withstand rough handling during
transportation to prevent accident.
EVEREST KANTO CYLINDER Limiteds high pressure gas cylinders for
oxygen, hydrogen, nitrogen, oxygen, helium, air etc are designed to withstand
8
-
8/8/2019 Upendrasinh Project 60 Pages
9/78
such rough handling. For one they are made of high quality seamless steel
tubes using state of the art CNG machines cylinders for domestic market
produced as per is-7285 certified by the BUREAU OF INDIAN STANDARD (ISI)
and approved by the controlled of explosives government of India
9
-
8/8/2019 Upendrasinh Project 60 Pages
10/78
The company provides cylinder water capacity that ranges between one
liter and 280 liters and also supplies the size we needed.
(2) Cylinders for CNG vehicles:-
EVEREST KANTO CYLINDER LIMITED provides a wide range of
CNG cylinder that are designed and manufactured to company with highest
national and international standard we have high quality seamless steel CNG
cylinder at most all kinds of vehicles like three wheelers, cars, buses and delivery
vehicles.
EVEREST KANTO CYLINDER LIMITED provides High quality
cylinders fitting strength usage life and to ensure safety and reliability under
extreme climate conditions they provides cylinders with or without valves and
with neck threads according to customers satisfaction full types of cylinders are
epoxy coated on the outside to offer protection against rough handling.
(3) Seamless cylinders for fire-fighting and beverage
Applications:-
EVEREST KANTO CYLINDER LIMITED high pressure gas cylinders
are ideal to store carbon dioxide CO2 Gas which is used to store Rae rated as a
propellant for fire extinguishes beverages and beer kegs and to inflate ruffed
rafts.
The EVEREST KANTO CYLINDER LIMITED range is wide and
includes small cylinders with water capacity of between one liter to 34 liters and
ones for system applications (46.7 liters to 280 liters). We provide light weightCO2 cylinder that CNG be used for hand held and portable wheel-type fire
extinguishers and for beverage industry.
10
-
8/8/2019 Upendrasinh Project 60 Pages
11/78
They not only apply cylinder with neck threading that meets us
requirement but also with other things like values and guard cups painted with
colors that meet national and other standers.
(4) Medical cylinders:-
11
-
8/8/2019 Upendrasinh Project 60 Pages
12/78
Gases like oxygen and nitrous oxide are extensively used in the health for
patients as per need for help breathing. For administrating anesthesia during
operations etc so cylinders not only need to be safe they have to be free it
containments as well.
EVEREST KANTO CYLINDER LIMITED medical gas cylinders comply
with stringent national and international standards and there for they have to
ensure the customers that they have smooth clean internal surfaces to prevent
contain in ants trapped in them. They can supply the cylinders with bull nose or
pin index values. The external surface of these cylinders is coated with good
quality enamel epoxy paint to meet Indian standard or to full fill the specific
customers requirements.
One more type of cylinder they have stated making is the jumbo
cylinders. This cylinder is very big in size and can store much amount of water
gas. These cylinders are used at the gas storage in CNG pump and in factories.
This types of cylinders are also used in big ship and in submarine. This cylinders
are very costly and heavy duty.
MANUFACTURING PROCESS OF THE CYLINDERMANUFACTURING PROCESS OF THE CYLINDER
12
-
8/8/2019 Upendrasinh Project 60 Pages
13/78
EVEREST KANTO CYLINDER LIMITED manufactures its cylinders from
superior quality alloy steel seamless tubes at its state of the art modern
production plants at Aurangabad and Tarapure.
The manufacturing process determines the utility of every cylinder and
therefore it is carried out with at most responsibility. The tube ends are heated
13
-
8/8/2019 Upendrasinh Project 60 Pages
14/78
the ideal temperature range in a production furnace for the computerized
numerical control (Cnc) hot spinning in conjunction with an optical pyrometer that
ensures precise temperature control to guarantee the finest grain structure and
protect grain flow maximum strength.
The heat treatment is carried out in a continue walking beam furnace
featuring accurate precision temperature control.
The cylinders are either normalized or hardened quenching in oil with
subsequent tempering according applications and requisite material properties.
Reference data or heat treatments are thoroughly documented by time
temperature plots.
The tolerance range stipulated in company standards is considerably
close to the strength variations permitted in national and international standards
and specifications.
Metallurgical properties are verified by means of examination and analysis
mechanical properties are verified by means of destructive testing. The neck
threading is carried out to close tolerances on modern high performance CNG
machines.All gauges and measuring equipments used under go regular calibration
checking. Cylinders are also subjected to non destructive ultrasonic examination
for flows.
TIME KEEPING SYSTEM
The time keeping system is very important for all types of
organizations. In EKC there is tight working schedule. The production unit
working continuously. In EKC there are general shifts and workers shifts. The
time schedule of them is following.
1. GE NERAL SHIFT TIME:-
14
-
8/8/2019 Upendrasinh Project 60 Pages
15/78
Office time 08:30am.To 05:30.Lunch time 12:30 pm. To 01:00pm.
2. WORKERS SHIFT TIME :-
First ship 06:30am.To 03:00pmLunch time 11:30am To 12:00pmSecond ship 03:00pm To 11:30pmLunch time 07:30pm To 08:00pm
15
-
8/8/2019 Upendrasinh Project 60 Pages
16/78
Third ship 11:30pm To 06:30amLunch time 03:00am To 03:30am
When the times of festivals like Navtatri, Diwali, and
Indipandanceday etc. the workers will work for over time. Sunday is holiday.
ORGANIZATION CHART:-
16
-
8/8/2019 Upendrasinh Project 60 Pages
17/78
CHAIRMAN
MANAGINGDIRECTOR
GENERAL
MANAGER
MANAGER
HR
MANAGER
FINANCIAL
MANAGER
MARKETING
MANAGER
PRODUCTION
MANAGER
ENGINEERING
MANAGER
PUBLIC
RELATION
OFFECER
ACCOUNTANT
ASSISTANT
TEAM
LEADER
SALES
EXECUTIVE
SUPERVISOR
WORKERS
TECHNICALSPECEALIST
17
-
8/8/2019 Upendrasinh Project 60 Pages
18/78
EMPLOYEE SERVICESEMPLOYEE SERVICES
The EVEREST KANTO CYLINDER LIMITED company provides best
services to their employees and workers. It is very necessary for the companies
to provide best services to their laborer because that they can get better out put
from them. If the laborers are satisfied than they will continue work at that
company for longer period of time. Some most services of the EVEREST KANTO
CYLINDER LIMITED is as under,
Annual Bonus Medical insurance They have developed their own hospital named tap hospital for the
laborer
They organizes cultural programs for their employees They also provide financial help as a when required but according to the
company rules.
Three times tea to their employees in one shift. They provides buses for their employees transportation without cost They have also developed Everest society for the managers and
supervisors
They provide housing facilities (100 quarters) to their workers for free ofcost and foods for a token of Rs. 25 only at the working place.
For safety issue they have provided year plugs, Gogals, Helmet, HandGloss , mask.
18
-
8/8/2019 Upendrasinh Project 60 Pages
19/78
INTRODUCTION
HUMAN RESOURSE MANAGEMENT is always active and living. It
is process of bringing people and organization work to other. It helps the
19
-
8/8/2019 Upendrasinh Project 60 Pages
20/78
organization by providing component and motivated employees. It achieves and
also organization objectives simultaneously. It establishment and maintain
coordinate relations between employees and employers or manger. Human
Resource planning is process of maintain balance between H.R. required in
organization. It creates relation between employees and employers.
Edwin Flipper Personal management is the planning, organizing,
directing, and controlling of the procurement, development, compensating,
integration, maintenance and separation of human resources of the and that
individual organization and social objective are accomplished.
According to Scott, It is that branches of management which is
responsible on a staff basis for concentration on those aspects of operation
which is primarily concerned with the relationships of management to employees
and with the development of the individual and the group.
It is impact said that all development comes from the human mind.
ORGAN IZATION OF PERSONNEL DEPARTMENT
Organization of personnel department is very necessary for all
business. It also plays an important part in human resource. All these activities
20
-
8/8/2019 Upendrasinh Project 60 Pages
21/78
undertaken by the personnel department, which are concerned with human
element as well as with material element in the organization are known function
of personnel management. The major function undertaken by EKC.
In the modern industrial world, almost all giant business enterprises
have a line staff organization the goals of an enterprise can be achieved in a
21
-
8/8/2019 Upendrasinh Project 60 Pages
22/78
systematic and effective way. This can be said to be the purest from of
organization.
In EKC organization structure of personnel department is clear in
communication from top to bottom.
1. RECRUITMENT, SELECTION AND INDUCTIONPROCESS:-
Recruitment:-
Recruitment forms the first stage in the process, which continueswith selection and ceases with the placement of the candidate. As for out body
blood is necessary but until heart purifies pure and impure blood one cannot
even breath properly similarly, until one have one proper person for their
organization even money and machine cannot work properly.
MANAGING
DIRECTOR
GENERAL
MANAGER
HR
MANAGER
PUBLIC RALATIONOFFICER
22
-
8/8/2019 Upendrasinh Project 60 Pages
23/78
23
-
8/8/2019 Upendrasinh Project 60 Pages
24/78
Sources of Recruitment
There are two type of recruitment policy in EKC, which are as under:
I. Internal sources.
II. External sources.
In internal sources are as under:-
24
InternalPresent employees.
Employee referrals.
Former employees.
Previous applicant
Employee exchanges
advertisement
Employment Agencies
Professional associations
Campus Recruitment
Deputation
Word-of-mouthRaiding
External
-
8/8/2019 Upendrasinh Project 60 Pages
25/78
a) Promotion: If the company has required the new employee thancompany gives the promotion to the old employees.
b) Transfer: The employee transferred one place to another.
In external sources are as under:-
a) Advertisement: - When in EKC the need of new employees than thegive advertisement in the news papers.
25
-
8/8/2019 Upendrasinh Project 60 Pages
26/78
b) Employment exchanges: - EKC also use of employment exchange.
Selection:-
Selection starts where recruitment ends. Or say, selection follows
recruitment. Having identified the potential candidates, the next logical step in
Human Resource process is selection of candidates.
According to stone, Selection is the process of differentiating
between applicants in order to identify those with a greater likelihood of success
in a job.
According to Yoder, selection is the process by which candidates
for employment are divided into class those who will be offered employment and
those who will not.
The selection process in EKC is under.
1) Prelim interview
2) Application blank3) Selection test
4) Selection interview
5) Reference check
6) Final selection
7) Placement
INDUCTION :-
Induction is the process to make the new workmen familiar with the
environment of the work area. He is also made aware about the rules and
regulation of the work area and resistibility of this job.
26
-
8/8/2019 Upendrasinh Project 60 Pages
27/78
In EKC ltd is done by the personal department or supervisor
normally this is provided within 1 or 3 months of the initial induction. This is with
and intention whether the employee is responsible well satisfied with him efforts
are make to remove the difficulty experience by the new employees by personal
talk, guidance and counselling.
27
-
8/8/2019 Upendrasinh Project 60 Pages
28/78
EKC arraigns some induction programmed as under:
1) Company history
2) Organization structure
3) Job situation
4) Employees own department
5) Personal/company policies
6) Rules and regulation
2. TRAINING & DEVELOPMENT
Training is the process of teaching the new and present employees
the basic skill they need to effectively perform their jobs.
Thus, training refers to the teaching and learning activities carried on for the
primary purpose of helping members of an organization.
There are many types of training but in EKC there is used on the
job training and knowledge based methods of the training. In salary so company
provided on the job training. The manager also arraigned some conference,
seminars, lecture, and programmed instruction.
28
-
8/8/2019 Upendrasinh Project 60 Pages
29/78
29
-
8/8/2019 Upendrasinh Project 60 Pages
30/78
3. JOB DESCRIPTION
Job description is a list of specified job duty. Responsibility,
Reporting, Relationship, working condition and supervisor responsibility.
Job description is one product of job analysis.
In EKC there is gave information and guidance to the candidates
regarding his particular job for which he has been specified and than four year
work. The manager provides information about the both organizational
information. The manger give information about how to work, where to work etc.
In EKC the manager or supervisor give the information regarding
the job to the candidates.
30
-
8/8/2019 Upendrasinh Project 60 Pages
31/78
31
-
8/8/2019 Upendrasinh Project 60 Pages
32/78
4. PROMOTION AND TRANSFER POLICY :-
Promotion:-
A promotion takes place when and employee move to a position
higher then the one formally occupied. His responsibilities, status pay also
increase or not. When as a result of promotion there is no increase in the pay it
called a promotion.
There are many bases on which employees are promoted. Such as
merit, qualification seniority, performance of the employees etc. many of the time
merit, performance and seniority of the employees are considered while taking adecision about his promotion.
After five year working in our workshop as a worker an employee
become supervisor and than after five year working as a supervisors he become
a manager. This is a very good policy by EKC for promotion.
Naturally in the sense that, the boss feels that employees are liable
for the promotion, and the give promotion to such an employee.
32
-
8/8/2019 Upendrasinh Project 60 Pages
33/78
33
-
8/8/2019 Upendrasinh Project 60 Pages
34/78
TRANSFER:-
A transfer is a horizontal or lateral movement of an employee from
the job, selection department shift, or position to another usually without involving
any change in duties, responsibility, skill needed or compensation.
EKC industries ltd in GANDHIDHAM jobs is not transferable. Only
internal transfer is that many one department to another department within the
organization. Transfer is not applicable from one branch to another branch.
34
-
8/8/2019 Upendrasinh Project 60 Pages
35/78
5. PERFORMANCE APPRAISAL SYSTEM:-
In simple terms, performance appraisal may be understood as the
assessment of an individuals performance in a systematic way, the performance
being measured against such factors as hob knowledge, quality, cooperation,
35
-
8/8/2019 Upendrasinh Project 60 Pages
36/78
judgment, versatility, health, and the like. Assessment should not be confined to
past performance alone. Potentials of the employee for future performance also
are assessed.
There are two types of performance appraisal methods. (1)
Traditional methods. (2) Modern methods.
In EKC the use traditional methods like (1) Man to man comparison
method and (2) Graphic rating scale method.
In EKC the use of man to man comparison method for the objective
of understood employee individual performance and the graphic rating scale to
know about employee character, contribution responsibility and creativity.
6. STUDY OF PROVIDENT FUND SCHEME:-
The employees provident fund, Provident fund, pension and
insurance schemes framed under the act are administrated by a tripartite central
board of trusties. This act applies to every estate which is a factory engaged the
36
-
8/8/2019 Upendrasinh Project 60 Pages
37/78
act in which the government modifies in the official gazette and in which more
persons are mote employed
Benefits of provident fund scheme:-
37
-
8/8/2019 Upendrasinh Project 60 Pages
38/78
It acts as made schemes for three types of benefits, like provident
fund, pension and deposit linked insurance. Under provident fund benefits an
employee can avail himself of non refundable withdraws or take advance from
his provident fund account for various purposes. Because it is government act it
apply to the EKC industries also. It means that EKC is also contributing at 8.33%
every month of the pay to the employees provident fund.
The main advantage is that, the employees can take a loan from
his provident fund account.
7. PERSONAL RECORD OF THE EMPLOYEES:-
Most of the companies are records bio-data of every employee.
This bio-data are as under. Companies keep bio-data are records weekly and
yearly.
Full name
Address
Age
Birth data
38
-
8/8/2019 Upendrasinh Project 60 Pages
39/78
Blood group
Married / unmarried
Working hours
Training
39
-
8/8/2019 Upendrasinh Project 60 Pages
40/78
Reason for keeping personal records
For performance appraisal system
For increment n wages and salary
For knowing efficiency of employees
For promotion and transfer
OTHER INFORMATION
EKC industries give following services to the employees.
1) UNIFORM:-
It gives uniform only to the permanent employees. Uniform
generally includes the clothes, shoes, belt etc. The company
provides two pairs of uniform to the workers and supervisor.
2) LOAN:-
EKC gives facilities of loan. EKC gives loan for the employees
provident fund and companys own society.
3) BONUS:-
40
-
8/8/2019 Upendrasinh Project 60 Pages
41/78
EKC give a bonus workers, supervisor and companys all of the
members.
4) GIFTS:-
41
-
8/8/2019 Upendrasinh Project 60 Pages
42/78
EKC gives sweets to all the employees on some festivals such as
Diwali, Dashera, Holi etc. and also give a birthday gifts of his
employees birthday.
8. Grievance handling procedure
Grievance is any dissatisfaction or feeling of injustice in connection
with ones employment situation that is brought to the attention of the
management. The cause of the dissatisfaction may be due to working conditions
or personal maladjustment or management policy regarding wages, bonus etc.
Present enactment like industrial Employment (standing order) Act 1946,Factories act 1945 and industrial Disputes act 1947 only indirectly deal with the
Redresser of individuals grievances.
Following are the steps for the Redresser of individual grievances:
An aggrieved employee shall present his grievance verbally to the officer
designated b the management for the same. The response shall be given by the
officer within the next 48 hours of the presentation of the complaint.
If the worker is not dissatisfied with the decision of the officer. He along with the
department head will present his grievance to the head of the department.
42
-
8/8/2019 Upendrasinh Project 60 Pages
43/78
43
-
8/8/2019 Upendrasinh Project 60 Pages
44/78
9. W AGE AND SALARY ADMINISTRATION
Wage and salary administration should be controlled by some
proper theories. The structure of wage and salary refers to implementation of
sound policies and practices of employee compensation.
Remuneration of employees largely consists of base remuneration,
perquisites and performance incentives. The components of the total
remuneration vary for different cadres and are governed by industry pattern,
qualifications and experience of the employees to excel in their performance,
recognize their contribution, and retain talent in the organization and reward
merit.
In EKC the board of director decided wage and salary of the
employees.
44
-
8/8/2019 Upendrasinh Project 60 Pages
45/78
45
-
8/8/2019 Upendrasinh Project 60 Pages
46/78
10. T RADE UNION
Trade union is a continuous association of wage earners for the
purpose of maintaining and improving the conditions of their working lives.
A continuous and whole entry association of the salary or wage
earners and egged and whatever industries or trade, formed for safe grading the
interest of its member, maintaining and improving the conditions of their
vocational interest and securing better relations between them and their
employer through collective bargaining.
Thus a trade union is a device which unable groups pa class in
industry or trade to bargaining with any other class all group on equal bases such
a union is.
1. INTRODUCTION
46
-
8/8/2019 Upendrasinh Project 60 Pages
47/78
There are the many kinds of management like financial
management, human resource management, marketing management. Todays
successful companies at all levels have one thing is common they are strongly
customer focused and heavily committed to marketing.
47
-
8/8/2019 Upendrasinh Project 60 Pages
48/78
Today, marketing mist be understood not in the old sense of
making a sale telling and selling but in the new sense of satisfying customers
needs. It is the very heart of modern marketing understands, creating,
communicating and delivering customer value and satisfaction.
DEFINITION:-
Marketing is the performance of business activities that directs the
flow as goods and services from the produces to the customers.
In the simple word, we can say that marketing means delivering
customers satisfaction at the profit. As far as EKC industries has also a separate
marketing department. Marketing department plays a vital roll because the
market of EKC industries is spread not only in India but also in foreign countries.
2. ORGANIZATION OF MARKETING DEPARTMENT
48
-
8/8/2019 Upendrasinh Project 60 Pages
49/78
MANAGING DIRECTOR
MARKETING MANAGER
MARKETING OFFICER
SALES DEPARTMENT
49
-
8/8/2019 Upendrasinh Project 60 Pages
50/78
As the above chart are starting the authorities flows from managing
director to marketing manager. There are no any sales men in this company.
There are two departments under marketing manager. First one is marketing
officer and second one is sales department.
3. PRODUCT PLANNING
First of all EKC is built product planning steps. The product
planning steps are as under.
Market survey
Innovation
Market research
Study of competitors product
Market testing
First of all they are market survey of the product. They carefully
segment the marker and choose his targets of consumer groups.
50
-
8/8/2019 Upendrasinh Project 60 Pages
51/78
And then after they are innovation, they are the market research
process and collect the market data. They study their competitors and then
company checks the market testing.
51
-
8/8/2019 Upendrasinh Project 60 Pages
52/78
MARKET SEGMENTATION
Market segment means divide the market into different customer
class. Has also divide their marker as per that need and preferences and
requirement of customers. EKC is not producing only one product but it produces
different internal parts of varies machinery. As it is not produce only one product
continuously. It has not any particular segment for its specific product.
In EKC consumer place an order as per requirement and EKC
produces the similar product demanded by the consumer. So, we can say thatEKC is producing that product which is demanded by their customer.
52
-
8/8/2019 Upendrasinh Project 60 Pages
53/78
53
-
8/8/2019 Upendrasinh Project 60 Pages
54/78
4. PRICING POLICY
Pricing means the value of product attribute expressed in monetary
team. Which is a consumer pay or is expressed to pay in exchange and
anticipation of the expected offered utility. Internal and external factors both are
affected to pricing decision.
Pricing covers the profit of the organization. So, if affects also and
profit is the main aim of any organization. So, it is very essential production
department lakes decision.
EKC industries takes the decision of price based on many factors
such as expected profit, administrative expenses, transportation charges.
54
-
8/8/2019 Upendrasinh Project 60 Pages
55/78
5. CHANNEL OF DISTRIBUTION
55
-
8/8/2019 Upendrasinh Project 60 Pages
56/78
Distribution is very essential point in view of company because it is
the process reach the product to the customer. At all the activities in the physical
flow of the product or transfer of the producer and the consumers.
A distribution channel is a set of interdependent organization
involved in the process of making a product or services available for use or
consumption by the consumer or business user.
Every organization has different distribution channels. EKC has
only one distribution channels.
Direct marketing channel
MANUFACTURER ------------------- CUSTOMER
There are no any sales men in HPCSL company direct talk to
customer.
A channel of distribution refers it to a process of distribution goodsand services from production centre to consumers. It is a one seat of pipeline
through which the producers put their products through it and so it reaches to the
consumers wants right:
The channel of distribution has many levels of distribution viz.
1. Zero level distribution
56
-
8/8/2019 Upendrasinh Project 60 Pages
57/78
Producer to consumer
2. One level distribution
Producer Retailer Consumer
57
-
8/8/2019 Upendrasinh Project 60 Pages
58/78
3. Two level distribution
Producer Wholesaler Retailer Consumer
Producer- Agent - Wholesaler - Retailer - Consumer
6. ADVERTISING
Advertisings are the most important promotion tools. No firm can go
long without using the advertising tools. Advertising is a very important step in
every firm and crucial decision for management. Advertising strategy consists of
two major elements are:
A. Advertising message
58
-
8/8/2019 Upendrasinh Project 60 Pages
59/78
B. Selection advertising media
Advertising means any paid form of non personal presentation and
promotion of goods or services by the company on its own or by giving contact to
an advertising agency.
59
-
8/8/2019 Upendrasinh Project 60 Pages
60/78
They do not have any special advertising department. EKC is
advertisement in industrial magazine, industrial fair, and international fair and
international news paper but not advertising in local news paper and television.
7. MARKETING RESEARCH
It includes information about your product and the competitors
product also, because you want to make to your product better by comparing it
with competitors product.
The systematic design, collection, analysis and reporting data
relevant to a specific marketing situation facing an organization.
As the need of customer changes and selling. Sellers use more
complex marketing approaches and face more complex marketing approaches
and face more competition. They used information on the effectiveness of their
marketing 100%. Todays mote rapidly changing environment managers had
more up to data information to make timely decision.
60
-
8/8/2019 Upendrasinh Project 60 Pages
61/78
The company can do marketing research in it own marketing
research department or in our side the marketing research.
In EKC industries they use the following marketing research
process.
61
-
8/8/2019 Upendrasinh Project 60 Pages
62/78
Defining the problem and research objective
Implementing research plan
Collecting the data
Analyzing the data
Presenting the findings to the marketing management
Developing the research plan for collecting informati
1 INTRODUCTION
Finance is regarded as the life blood f business enterprise. It
has rightly said that business needs money to pay more money. Hence effective
management of every business enterprise is closely link with efficient
management of its finance.
Definitions:-
According to J.C. Van Horne, financial management is
concerned with the acquisition, financing management, of assets with some over
all goals in mind.
According to Weston and Brigham, Financial Management
is an area of financial decision making, harmonizing individual motives and
enterprise goals.
62
-
8/8/2019 Upendrasinh Project 60 Pages
63/78
63
-
8/8/2019 Upendrasinh Project 60 Pages
64/78
ORGANIZATION OF PERSONNELDEPARTMENT
Finance department is also the most important department,
which has all the responsible about finance. Financial department takes the
decision regarding sources of fund, application of fund, cash flow, borrowing
policy etc.
Organization chart of finance EKC is given below.
Managing
Director
GeneralManager
Financial
Manager
Accountant
Assistant
64
-
8/8/2019 Upendrasinh Project 60 Pages
65/78
65
-
8/8/2019 Upendrasinh Project 60 Pages
66/78
1) FINANCIAL PLANNING
In every organization has financial planning is
required. Finance planning means:-
Estimation of the amount of capital to be raised.
Determining the form & proportionate amount of securities.
Laying down the policies as to the administration of the financial plan.
Financial planning means deciding in advance the
financial activities to be carried out by the firm.
Financial planning is very necessary for smooth
running of the business financial planning covers functions such as forecasting of
cash receipts.
In EKC the finance manager is making financial
planning. Every decision of finance is to be taken by finance manager of EKC.
66
-
8/8/2019 Upendrasinh Project 60 Pages
67/78
2) CAPITALIZATION
Capitalization means amount of capital employed inbusiness. It studies of the company and indicated whether it is proper or not
67
-
8/8/2019 Upendrasinh Project 60 Pages
68/78
company can estimate the future financial plan by studying the capitalization.
Generally there are 3 types of capitalization.
1) OVER CAPITALIZATION:-
A company is said to be over capitalized, when its earnings
are less as compared to its capital investments. This means that the earning of
the unit is less as compared to the earning of the some other unit in the same
industry.
2) UNDER CAPITALIZATION:-
A company is said to be under capitalized, when its earnings
are high as compared to its capital investments. Such case of
undercapitalization is very rare.
3) OPTIMUM CAPITALIZATION:-
A company is said to be optimum capitalized, when itsearnings are appropriate in accord as compared to its capital invested.
3) CAPITAL STRUCTURE
Capital structure refers to proportional share of different
security and other funds in the capitalization. It decides the proportion of fund to
be raised by issued of ownership capital and by borrowing.
68
-
8/8/2019 Upendrasinh Project 60 Pages
69/78
Capital structure can be different from the firm to firm and
management to management and country to country. It includes the long term
capital like equity share. Preference share, bonus share, debentures, reserve
and surplus etc.
69
-
8/8/2019 Upendrasinh Project 60 Pages
70/78
In EKC capital structure is well designed. The capital
structure EKC is composed of equity share and capital invested by the owners.
Through there is equity share capital in the capital structure of the firm.
4) RATIO ANALYSIS
There are three branches of accounting:
1) Financial Accounting.
2) Cost Accounting.
3) Management Accounting.
70
-
8/8/2019 Upendrasinh Project 60 Pages
71/78
In Management Accounting Manager has to prepare various
statements. Manager has to do some analysis & interpretation of various data.
Through this analysis manager has to evaluate past information & predict future
position. So, this purpose he has to do wome analysis of various financial
situations.
71
-
8/8/2019 Upendrasinh Project 60 Pages
72/78
Then one question arise in our mind how we can do such
analysis. There are five techniques to do some analysis.
1) Ratio analysis
2) Fund flow statements
3) Cash flow statements
4) Common size statements
5) Comparative statements.
7. MAMAGEMENT OF FIXED ASSETS
There are some fixed assets in the business. Fixes assets
are those assets that are permanent in nature and those are not easily
convertible in to cash. There should be a systematic utilization of these fixed
assets.
It depends upon the firm how fixed assets are managed in
an efficient way. These assets include land, building, plant and machinery, etc.
72
-
8/8/2019 Upendrasinh Project 60 Pages
73/78
73
-
8/8/2019 Upendrasinh Project 60 Pages
74/78
8. MANAGEMENT OF WORKING CAPITAL
Working capital management is concerned with the
problems that arise in attempting to manage the current assets. In other words,
capital management involves deciding upon the amount and composition of
current assets and how to finance these assets e.g. cash, receivable and
inventories as well as currant liabilities, The term currant assets refers to those
assets which in the ordinary course of business can be or will be turned into cash
within one year without under going a diminution in value.
The working capital manger at EKC is according to the
standard. The company has enough currant assets to pay of its currant liabilities.
74
-
8/8/2019 Upendrasinh Project 60 Pages
75/78
75
-
8/8/2019 Upendrasinh Project 60 Pages
76/78
9. LEVERAGE ANALYSIS
Financial leverage is defined as the ability of a firm to use fixed financial
changes in earring before income tax on the earning per share.
The company to magnify the equity earning uses the financial leverage.
Debt. Generally have fixed of interest. Company has to pay specified rate of
interest on such capital. If company rate of return on investment is more than the
rate of interest on debt than company can trade on equity or can employ fixed
charge debt. Usually company earn more than such fixed cost on debt capital soafter paying interest remaining surplus is distribution among share holder subject
to the condition that earning or rate is higher than the rate of interest on sub
debts.
EKC pvt.Ltd has employed debentures and long term, its capital structure
incurring fixed cost or rate of interest. If company earning are higher than it is
called favorable leverage. If earning are lower than then cost it is called
unfavorable leverages.
76
-
8/8/2019 Upendrasinh Project 60 Pages
77/78
BIBLIOGRAPHY
Personnel Management:
77
-
8/8/2019 Upendrasinh Project 60 Pages
78/78
Book: personnel management
Author: C.B.MAMORIA
S.V.GANKAR
Publication: Himalaya Publication House
Edition: Twenty-fifth edition
Marketing management:
Book: Marketing management
Author: PHILIP KOTLER
KEVIN LANE KELLER
ABRAHAM KOSHY
Publication: Dorling Kindersley (India) Pvt. Ltd.
Edition: Eleventh edition
Financial management:
Book: Financial management
Author: Prof. J.M. SHAH
Dr. P.K.PRIYAM
Dr. HITESH SHUKLA
Publication: Mahajan