University of Wisconsin StoutLearning TechnologiesBryan Walhovd
Goals:
The Goal of this Module is to give you a basic understanding of a cable modem and how it operates.
This high level overview will help you understand the following: What a cable modem is. The types of interfaces that exist on the modem. Devices associated with a cable provider network. How a modem comes online. Glance into the OSI model and DOCSIS.
Future modules will provide a detailed view of each step a modem takes to come online as well as factors that limit connectivity and speed.
What is a Cable modem?
A cable modem is a broadband device used to connect to the internet over a cable companies Hybrid Fiber Coaxial Network (HFC).
Image courtesy of: https://daiswiki.wikispaces.com/
Cable modem interface A cable modem has two main interfaces that
allow operation with the cable plant and customer equipment. A coaxial cable port used to hook up to the
cable plant
A RJ45 port which is used to connect to a computer or router via an RJ45 Ethernet cable.
Image courtesy of: http://www.cloudclipart.com/clipart/free-clipart/rj45-detail
Image courtesy of: http://www.cloudclipart.com/clipart/other-clipart/coaxial-cable-detail
In your home
Typically a modem is hooked to a router in a home or a business which allows access too the internet for multiple devices including PC’s, Phones, Printers and Gaming consoles.
Image courtesy of: bmisitgs.wikispaces.com
Connection
Once the cable modem is connected to the HFC plant via the Coaxial connector and your PC, your all ready to go right?
Not exactly! The modem itself has to be set up (provisioned) on the cable providers network in order for it to access the internet.
So what next?
The Cable Modem Termination System Once hooked up to the coaxial plant, the
modem connects back to the cable providers CMTS, located typically in a HeadEnd.
Image courtesy of: By Vivien Guéant [CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons
What does all this mean??? A Modulator Demodulator (modem)
communicates with the cable provider utilizing Radio Frequency. This communication is bi-directional as we
send and receive data from our personal devices.
Images courtesy of: http://www.cloudclipart.com/clipart/free-clipart
Image courtesy of: By Vivien Guéant [CC BY-SA 3.0 (http://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons
Image courtesy of: https://daiswiki.wikispaces.com/
How it works!
Downstream Lock The modem first locks onto the Downstream
frequency(s). The normal frequency range delivered from the cable provider is 54Mhz to 1000 Mhz.
Scan for Downstream Channel
Power Modem
ON
Downstream Sync Established
Upstream Lock
The CMTS then sends a UCD (Upstream Channel Descriptor) which tells the modem the Return frequency to talk back at which is typically 5Mhz to 42Mhz.
Obtain the upstream parameters
UCD acquired
Ranging and IP Once the modem has successfully locked on
downstream and upstream, it completes ranging, IP connectivity, and security.
Start Ranging
Complete Ranging and Power adjustments
IP Complete
Establish IP Connectivity
Establish TOD/TOD Established
Establish Security/ Security Established
Configuration, Registration and Baseline Privacy. Almost there!!
Transfer operational parameters and
configuration file.
Register with CMTS
Initiate and establish Baseline Privacy
Registration complete
Modem is operational!
I’m ONLINE!!
Your device can now communicate to the internet!!!
Image courtesy of: http://lis3353.wikispaces.com/file/view/125_systemy_standardu_docsis.jpg/89183273/332x209/125_systemy_standardu_docsis.jpg
Do all cable modems function the same? The OSI model was defined to standardize the
functions of a communication system.
A cable modem, as with most communication devices, uses the Open Systems Interconnection Model.
The OSI model breaks a communication system into different layers with the objective of interoperability between devices without requiring logic changes of hardware and software.
Open System Interconnection?Detail:
Image By Dino.korah [GFDL (http://www.gnu.org/copyleft/fdl.html) or CC-BY-SA-3.0 (http://creativecommons.org/licenses/by-sa/3.0/)], via Wikimedia Commons
•Each Layer is briefly described in the included diagram.
• Where do you think DOCSIS modems operate?
OSI and DOCSIS
Data Over Cable Service Interface Specification (DOCSIS) was designed to standardize high bandwidth data transfer between cable providers internationally.
DOCSIS standard changes as the consumer demand for bandwidth increases.
DOCSIS modems operate primarily at the Physical, Data Link and Network layers of the OSI model.
Quiz
Click Here to start the Quiz
What do you know about DOCSIS cable modems??
Hint: Pick the best answer!
A cable modem is a broadband device used to connect to the internet over which type of Network?
HFC Network
Fiber NetworkCoaxial Cable
Network
Wireless Network
CORRECT!!
Next Question
Please Try Again!!
Next QuestionTry Again
OSI is short for?
Open Something Interesting
Open System Interconnection
Open System Interface
Open System Internet
Try This one!
CORRECT!!
Next Question
Please Try Again!!
Next QuestionTry Again
CMTS stands for?
Cable Modem Transitional
System
Cable Modem Television system
Cable Modem Telecommunication
s System
Cable Modem Termination
System
CORRECT!!
Next Question
Please Try Again!!
Next QuestionTry Again
The first thing a modem does when hooked to the HFC network once powered on is?
Looks for its Downstream
Looks for it’s upstream
parameters
Registers with the CMTS
Accesses the internet
CORRECT!!
Great Job!! Quiz Complete
Please Try Again!!
Great Job!! Quiz Complete
Try Again
Thank You for Completing DOCSIS Cable Modem Basics Part 1.
If you have additional questions or feedback, please click here.
Cable Modems are interesting…
Try Again