Download - types of stress and strain
![Page 1: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/1.jpg)
1
![Page 2: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/2.jpg)
![Page 3: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/3.jpg)
PARTICIPANTS NAME
SATYAM SINGH (11SETME252) SAYANTAN DAS (11SETEM480) VIBHAS KUMAR (11SETME165) SUMIT RAJ (11SETME363) VISHAL BASNET (11SETME411)
![Page 4: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/4.jpg)
Stress
Simple stresses are expressed as the ratio of the applied force divided by the resisting area or
σ = Force / Area.
There are two types of simple stress namely;
normal stress, combined stress
![Page 5: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/5.jpg)
Normal Stress
The resisting area is perpendicular to the applied force, thus normal. There are two types of normal stresses;
Tensile stress Compressive stress.
Tensile stress applied to bar tends the bar to elongate while compressive stress tend to shorten the bar.
where P is the applied normal load in Newton and A is the area in mm2.
![Page 6: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/6.jpg)
![Page 7: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/7.jpg)
Combined Stress
In combined stress there are two types of stress
Shear stress
Tortional stress
![Page 8: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/8.jpg)
Shear Stress
Forces parallel to the area resisting the force cause shearing stress. It differs to tensile and compressive stresses, which are caused by forces perpendicular to the area on which they act. Shearing stress is also known as tangential stress.
where V is the resultant shearing force which passes which passes through the centroid of the area A being sheared.
![Page 9: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/9.jpg)
![Page 10: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/10.jpg)
The stresses and deformations induced in a circular shaft by a twisting moment.
Tortional stress
![Page 11: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/11.jpg)
Strain
Also known as unit deformation, strain is the ratio of the change in dimension caused by the applied force, to the original dimension.
where δ is the deformation and L is the original length, thus ε is dimensionless.
![Page 12: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/12.jpg)
Types of strain:
Tensile strainCompressive strainShear strainVolumetric strain
![Page 13: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/13.jpg)
Tensile strain
It is the ratio of the increase in length to its original length.
Tensile strain = increase in length,(l-l0)/original length,(l0)
![Page 14: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/14.jpg)
Compressive strain
It is ratio of the decrease in length to its original length.
compressive strain = decrease in length,(l0-l)/original length,(l0)
![Page 15: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/15.jpg)
Shear strain
We can define shear strain exactly the way we do longitudinal strain: the ratio of deformation to original dimensions.
tan
![Page 16: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/16.jpg)
Volumetric strain of a deformed body is defined as the ratio of the change in volume of the body to the deformation to its original volume.
Volumetric strain
volumetric strain = change in volume/original volume
![Page 17: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/17.jpg)
Stress-strain diagram
![Page 18: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/18.jpg)
The curve starts from the origin ‘O’ showing thereby that there is no initial stress or strain in the test specimen.
Up to point ‘A’ Hooke’s law is obeyed and stress is proportional to strain therefore ‘OA’ is straight line and point ‘A’ is called the proportionality limit stress.
The portion between ‘AB’ is not a straight line, but up to point ‘B’, the material remains elastic.
![Page 19: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/19.jpg)
The point ‘B’ is called the elastic limit point and the stress corresponding to that is called the elastic limit stress.
Beyond the point ‘B’, the material goes to plastic stage until the upper yield point ‘C’ is reached.
At this point the cross-sectional area of the material starts decreasing and the stress decreases to a lower value to a point ‘D’, called the lower yield point.
Corresponding to point ‘C’, the stress is known as upper yield point stress.
![Page 20: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/20.jpg)
At point ‘D’ the specimen elongates by a considerable amount without any increase in stress and up to point ‘E’.
The portion ‘DE’ is called the yielding of the material at constant stress.
From point ‘E’ onwards , the strain hardening phenomena becomes pre-dominant and the strength of the material increases thereby requiring more stress for deformation, until point ‘F’ is reached.
![Page 21: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/21.jpg)
Point ‘F’ is called the ultimate point and the stress corresponding to this point is called the ultimate stress.
It is the maximum stress to which the material can be subjected in a simple tensile test.
At point ‘F’ the necking of the material begins and the cross-sectional area starts decreasing at a rapid rate.
Due to this local necking the stress in the material goes on decreasing inspite of the fact that actual stress intensity goes on increasing.
![Page 22: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/22.jpg)
Ultimately the specimen breaks at point ‘G’, known as the breaking point, and the corresponding stress is called the normal breaking stress bared up to original area of cross-section.
![Page 23: types of stress and strain](https://reader031.vdocuments.mx/reader031/viewer/2022020207/559c0c541a28ab7a6a8b488c/html5/thumbnails/23.jpg)
Thanks for your kind attention….