Triple Pack User Manual
Sirius Loop ASL120 is InWin’s addressable RGB case fan. The structure and fan blade design were
carefully considered to provide the optimal cooling for your PC’s internal components.
Product Story
Package Content
Sirius Loop Fans x 3
Fan RGB One-Click Controller x 1
Screws x 12 3-Pin Headers x 3
03
01 Please make sure the power is off.
04 Installing the 3rd fan: Repeat
02 Install the fans in your PC case and mount them in the designated areas.
Installation Guide
Connect the fan’s Addressable RGB Y-Cable to a motherboard’s 3-pin addressable RGB header. Connect the attached fan cable to the motherboard’s fan header.Installing the 2nd fan: Connect the Addressable RGB Y-Cable and connect it to the available 3-pin Addressable RGB header on the previous fan. Connect the fan to the available fan header from the previous fan.
The fan cable, Addressable RGB Y-Cable and their counterparts are attached to each. Please connect as followed:
2nd fan’s fan cable
2nd fan’s addressable RGBY-Cable
MotherboardFan Header
1st fan’s addressable RGBY-Cable
1st fan’s fan Cable
Motherboard’s 3-pin addressable RGB header
If your motherboard does not support an addressable header, please use the included Fan RGB One-Click Controller to connect to your PSU’s SATA cable and the fan’s Addressable RGB Y-Cable in order to use the 11 different of lighting effects.
1st fan’s addressable RGBY-Cable
3-Pin LED header1st fan’s addressable RGBY-Cable
2nd fan’s addressable RGBY-Cable
Fan RGB One-Click ControllerSATA Power Input
Hold the button to turn on or off the lights. Tap the button to change the lighting modes.
*InWin reserves the right to change the lighting modes.
1 7
2 83 94 10
5
6
11
RainbowBreathingFull CircleTwo-Tone RingLight at the end of the Tunnel
Diagonal TransitionLED-RedLED-GreenLED-BlueLED-White
Rotating LED Trio
Troubleshooting
Important Notes
If your fan does not operate properly, please follow the instructions below:1.Please check your system’s power.2.Please make sure all the connectors are connected properly.
1.Please install the fan by following our instructions.2.When storing the fan, please keep this product away from high temperatures. Keep it away from machines such as heaters that might cause high temperatures.3.Please do not put anything in the impeller.4.Please do not modify the wires or the connectors provided by InWin.5.Please do not touch the fan blades when the fan is in operation.6.Please only use your fan in a computer case.7.Please keep this product away from any liquids.
■ Specifications may vary based on different regions.
InWin Sirius Loop Fans
Specifications
Product NamePart NumberFan SizeMaterialRated VoltageRated PowerRated CurrentADD RGB Rated VoltageADD RGB Rated PowerADD RGB Rated CurrentSpeed ModeAir FlowAir PressureLEDConnectorNoise LevelBearing TypeLife ExpectationNet WeightPackage Dimensions(H x L x W)Warranty
Sirius Loop ASL120Triple Pack ASL120FAN-3PK120 x 120 x 25mmPBTDC12V1.2W0.1ADC5V1.25V0.25APWM 500~1800 RPM50CFM1.67mm/ H2OAddressable RGB4-pin27 dB(A) Max.Long Lifespan Sleeve Bearing>30,000 hrs600 g185 x 125 x 80mm2 Years
Copyright © 2019 InWin Development Inc. All Rights Reserved.