Tighten the remainder of the frame assembly bolts.

Loosen the frame assembly bolts.

Start with the Table Top upside down on floor or work surface. Align frame assembly with the pre-drilled holes. Attach table frame to bottom side of table top using Screws B (x12).

Ensure that all 12 of Screw B are fastened tightly.

Fasten controller with Screws A (x2).

54

1

3

What you will need: • #2 Phillips Head

screwdriver or driver bit • Standard straight blade

screw driver

x2 x12

SEWING STATION Assembly Directions

x1 Sewing Station Top

Screws

Hardware provided:•1 Sewing Station Table Top •Frame

A B

2

THE SEWING STATIONS Assembly Guide

EXECUTIVE

SEWING STATION

SIGNATURE

SEWING STATION

Visit us online at:martellinotions.com

facebook.com/martellinotionsinstagram.com/martellinotionsJoin Martelli Quilters Group on Facebook to be a part of a wonderful community of quilters that share in their

knowledge of quilting and Martelli Products