Download - THE MEGHALAYA FACTORIES RULES'1980
![Page 1: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/1.jpg)
THE MEGHALAYA FACTORIES RULES,1980 [[[[[[[[[[[[[
NO:LABOUR-108/79/179 ,DATED:26.05.1989 [As amended upto FEBRUARY 2007]
CONTENTS CHAPTER I Preliminary
Sl Rule No. Page No.
1. Rule 1----- Short title and commencement ..........
2. Rulle 2----- Definitions ..........
3. Rule 2A---- Competent Person ..........
4. Rule 3------ Submission of plans ..........
5. Rule 4------ Approval of plans ..........
6. Rule4A---- - Certificate of Stability ..........
7. Rule 5 ------Application for registration &grant of Licence ..........
8. Rule 6-------Grant of Licence ..........
9. Rule 7-------Amendment of Licence ..........
10. Rule 8------Renewal of Licence ..........
11. Rule 9------Transfer of licence ...........
12. Rule 10-----Procedure on death or disabilty of Licence ..........
13. Rule 11-----Loss of licence ..........
14. Rule 12-----Payment of fees ..........
15 Rule 13-----Prohibition of use of a premises as a factory ..........
without a valid licence
16. Rule 14-----Notice of Occupation ..........
17. Rule 15-----Notice of change of Manager ..........
18. Rule 15A—Guidelines, instructions and records ..........
CHAPTER II
Inspecting Staff
1. Rule 16-----Qualification of Chief Inspector, ..........
Deputy Chief Inspector etc.
2. Rule 17----Powers of Inspectors ..........
3. Rule 18----Duties of Certifying Surgeon ..........
CHAPTER III
Health 1. Rule 19----Record of white washing etc. ..........
2. Rule 20----Cleanliness of walls and ceilings ..........
![Page 2: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/2.jpg)
2 3. Rule 21----Disposal of Trade Wastes and Effluents ..........
4. Rule 22----Ventilation and Temperature ..........
5. Rule 23----When artificial humidification not allowed ..........
6. Rule 24----Provision of Hygrometers ..........
7. Rule 25----Exemption from maintenance of Hygrometers ..........
8. Rule 26----Copy of Scedule to Rule 23 to be affixed near ..........
every Hygrometer
9. Rule 27----Temperature to be recorded at each Hygrometer ..........
10. Rule 28----Specification of Hygrometer ..........
11. Rule 29----Thermomters to be maintained in efficient order ..........
12. Rule 30----Inaccurate thermometer not to be used without ..........
fresh certificate
13. Rule 31----Hygrometer not to be affixed to wall etc.,unless ..........
protected by wood
14. Rule 32----No Reading to be taken within 15 minutes of ..........
renewal of water
15 Rule 33----How to introduce steam for humidification ..........
16. Rule 34----(Lighting, application and commencement) .......... Deleted
17. Rule 35----Lighting of interior parts ..........
18. Rule 36----Prevention of Glare ..........
19. Rule 37----Power of Chief Inspector to exempt ..........
20. Rule 38----(Exemption from Rule 35) .......... Deleted
21. Rule 39----Quantity of Drinking water ..........
22. Rule 40----Source of Supply ..........
23. Rule 41----Means of Supply ..........
24. Rule 42----Cleanliness of well or reservoir ..........
25. Rule 43----Report from Health Officer ..........
26. Rule 44----Cooling of water ..........
27. Rule 45----Latrine accommodation ..........
28. Rule 46----Latrine to conform to public health requirements ..........
29. Rule 47----Privacy of latrines ..........
30. Rule 48----Signboards to be displayed ..........
31. Rule 49----Urinals accommodation drains ..........
32. Rule 50----Urinals to conform to public health requirements ..........
33. Rule 51----Certain latrines and urinals to be connected to sewerage system. ..........
34. Rule 52----Whitewashing, colourwashing of latrines and urinals ..........
35. Rule 53----Construction and maintenance of drains ..........
36. Rule 54----Water taps in latrines ..........
37. Rule 55----Number and locations of spittoons ..........
38. Rule 56---Types of spittoons ..........
![Page 3: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/3.jpg)
3 39. Rule 57 ----Cleaning of spittoons ..........
CHAPTER IV
Safety
1. Rule 58 ----Further Safety Precautions ..........
2. Rule 59 ----Register of workers employed for work on or ..........
near machinery in motion
3. Rule 60 ----Employment of young persons on ..........
dangerous machines
4. Rule 61 ----Hoists and lifts ..........
5. Rule 62 ----Lifting Machines,chains,ropes and lifting tackles ..........
6. Rule 63 ----Pressure Vessels or Plant ..........
7. Rule 64 ----Water-sealed gasholder ..........
8. Rule 65 ----Excessive weights ..........
9. Rule 66 ----Protection of eyes ..........
10. Rule 67 ----Minimum dimensions of manholes ..........
11. Rule 68 ----Exemptions ..........
12. Rule 69 ----Fire Protection ..........
13. Rule 70 ----(Fire Fighting apparatus and water supply) ......... Deleted
14. Rule 71 ----Safety Officers ..........
15. Rule 72 ----Buildings and Structures .........
16.Rule 73 ------Machinery and plant ..........
17.Rule 74- -----Methods of work ..........
18.Rule 75 -----Stacking and storing of materials etc. ..........
19.Rule 76 -----Ovens and Driers ..........
20.Rule 77 ---- -Ship building and ship repairing ..........
21.Rule 78 -----Reaction vessels and kettles ..........
22.Rule 78-A -----Examination of eye sight of certain workers ..........
23. Rule 78-B -----Safety Committee ..........
24. Rule 78-C -----Quality of Personal Protective Equipment ..........
25. Rule 78-D -----Protective Equipment ..........
26. Rule 78-E -----Thermic Fluid Heaters ..........
27.Rule 78-F ------Site Appraisal Committee ..........
28. Rule 78-G -----Health and Safety Policy ..........
29. Rule 78-H -----Material Safety Data Sheet ..........
30. Rule 78-I -----Disclosure Of information to workers ..........
31. Rule 78-J -----Disclosure of information to the Chief Inspector ..........
32. Rule78-K ------Information on industrial wastes ..........
33. Rule78-L ------Review of the information furnished to the workers etc. ..........
34. Rule78-M ------Confidentiality of information ..........
35. Rule78-N ----- Medical examinatiion of workers ..........
[Hazardous Process]
![Page 4: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/4.jpg)
4 36. Rule78-O----- Occupational Health Centres ..........
37. Rule78-P----- Ambulance Van ..........
38. Rule78-Q----- Decontamination facilities ..........
39. Rule78-R----- Making available Health Records to workers ..........
40. Rule78-S----- Qualification etc. Of Supervisers ..........
41. Rule78-T----- Issue of guidelines [to Occupiers] ..........
CHAPTER V
Welfare
1. Rule 79---- Washing facilities ..........
2 Rule 80---- Facilities for keeping clothing ..........
3. Rule 81--- First-aid appliances ..........
4. Rule 82---- Notice regarding first-aid ..........
5. Rule 83---- Ambulance room .........
6. Rule 84---- Canteens ..........
7. Rule 85---- Dining hall ..........
8. Rule 86---- Equipment ..........
9. Rule 87---- Price to be charged ..........
10 Rule 88---- Accounts ..........
11. Rule 89---- Managing Committee ..........
12. Rule 90---- Annual Medical Examination ..........
13. Rule 91---- Shelters, rest rooms and lunch rooms ..........
14. Rule 92----- Creches ..........
15. Rule 93---- Washroom ..........
16. Rule 94---- Supply of milk and refreshment ..........
17. Rule 95---- Clothes for creche staff ..........
18. Rule 96---- Exemption from provision of creche ..........
19. Rule 97---- Welfare Officers ..........
CHAPTER VI
Working Hours for Adults 1. Rule 98------Compensatory Holydays ..........
2. Rule 99------Muster Roll for exempted workers ..........
3. Rule 100-----Notice of work for adults ..........
4. Rule 101-----Register of adult workers ..........
5. Rule 102-----Persons defined to hold positions of supervision ..........
or management
6. Rule 103-----Persons defined to hold confidential positions ..........
7. Rule 104-----List to be maintained of persons holding confidential ..........
positions etc.
8. Rule 105-----Exemption of certain adult workers ..........
![Page 5: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/5.jpg)
5 CHAPTER VII Employment of young persons 1. Rule 106----Notice of period of work for children ..........
2. Rule 107----Register of child workers ..........
CHAPTER VIII
Leave with wages 1. Rule 108----Register of leave with wages .......... .
2. Rule 109----Leave Book ..........
3. Rule 110----Medical Certificate .........
4. Rule 111----Notice to Inspector of involuntary unemployment ..........
5. Rule 112----Notice by worker ..........
6. Rule 113----Notice of leave with wages ..........
7. Rule 114----Payment of wages if the worker dies ..........
8. Rule 115-----Register to be maintained in case of ..........
exemption under section 84
CHAPTER IX Special Provisions
1. Rule 116----Dangerous manufacturing processes or ..........
operations.
2. Rule 117----Notification of accidents and dangerous occurences ..........
3. Rule 118----Notice of poisoning and disease ..........
CHAPTER X Supplemental
1. Rule 119----Procedure in Appeals ..........
2. Rule 120----Display of Notices ..........
3. Rule 121----Returns ..........
4. Rule 122----Service of Notices ..........
5. Rule 123----Information required by the Inspector ..........
6. Rule 123A—Permissible levels of cetain chemical substances ..........
in work environment
7. Rule 124----Muster Roll ..........
8. Rule 125----Register of accidents and dangerous occurences ..........
9. Rule 126----Maintenance of Inspection Book ..........
10. Rule 127---- Information regarding closure of factories ..........
11. Rule 128----Notice regarding number of workers in each room ..........
12.. Rule 129----Repealing of The Meghalaya Factories ..........
Rules (The Assam Factories Rules,1950; adapted by Meghalaya)
![Page 6: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/6.jpg)
6 -:ANNEXURE - I:-
FORMS Pages
1. Form 1---- Application for permission to construct,extend .......... or take into use any building as a factory 2. Form 2---- Application for registration and grant or .......... renewal of licences 3. Form 3---- Licence to work a factory ..........
4. Form 4----Notice of change of Manager .......... 5. Form 5----Certificate of fitness [Under Rule 18(2)] .......... 6. Form 6----Health Register [Under Rule 18(5), .......... Deleted
Schedules-III,IV,X,XIV,XVI, XX and XXI to Rule 116] 7. Form 7----Record of lime washing,painting etc. ..........
8. Form 8----Humidity Register ......... 9. Form 9----Register of workers employed for work on or ..........
near machinery in motion 10. Form 10--- Report of examination of Hoists and Lifts ..........
11. Form 11--- Report of examination or test of pressure .......... vessel or plant
12. Form 12--- Register of examination of Gasholders ..........
13. Form 13--- Report of examination of watersealed Gasholders ..........
14. Form 14--- Register of Compensatory Holidays ..........
15. Form 15--- Overtime Muster Roll for exempted workers ..........
16. Form 16--- Notice of work for adult workers ..........
17. Form 17--- Register of adult workers ..........
18. Form 18--- Notice of period of work for child workers ..........
19 . Form 19--- Register of child workers ..........
20 . Form 20--- Register of leave with wages ..........
21 . Form 21--- Leave Book ..........
22. Form 22--- Nomination for payment of pay due for period of .......... holidays in the event of death of worker.
23. Form 23 --- Certificate of fitness (Under Scedule II to Rule 116) .......... 24. Form 24---- Health Register ..........
25. Form 25--- Report of examination and test of Dust Extraction .......... /Suppressiion system
26. Form 26--- Special certificate of fitness ..........
27. Form 27--- Certificate of fitness for dangerous operations ..........
28. Form 28--- Certificate of fitness(Under Scedule XXIII to Rule 116)..........
29. Form 29--- Health Register(Under Schedule XIII to Rule 116) ..........
30 Form 30-- Report of accident or dangerous occurrence resulting in .......... death or bodily injury
![Page 7: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/7.jpg)
731. Form 31---Report of dangerous occurrence which does not result in death .......... or bodily injury 32. Form 32---Notice of poisoning or disease ..........
33. Form 33---Abstract of The Factories Act,1948 and The Meghalaya .......... Factories Rules,1980 34. Form 34---Annual Return ..........
35. Form 35---Half-yearly Return ..........
36. Form 36---Muster Roll ..........
37. Form 37---Register of accidents and dangerous occurrences ..........
ANNEXURE II:
Index to the SCHEDULES ..........
"SCHEDULES" under Rule 116 : ..........
THE GAZETTE OF MEGHALAYA, Thursday, December,6,1990
NOTIFICATION The 31st May, 1990 No: LABOUR- 108/77/138— In exercise of the powers conferred under Section 112 of the Factories Act,,1948 (Central Act 63 of 1948), the Governor of Meghalaya is pleased to make the MEGHALAYA FACTORIES RULES,1980, after previous notice of its intention to do so, published in the Gazette of Meghalaya (Part VA), dated 20th September 1979 vide Notification Memo No: Labour-108/77/4, Dated 2nd August, 1979. J.M. Phira Spl. Secy. to the Govt. of Meghalaya, Labour Department.
![Page 8: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/8.jpg)
8THE MEGHALAYA FACTORIES RULES,1980
CHAPTER I
Preliminery 1.Short title and commencement : (1) These rules may be called The Meghalaya Factories Rules,1980 (2) They shall extend to the whole of Meghalaya. (3) They shall come into force at once.
2. Definitions : In these rules unless there is anything repugnant in the subject or context:- (a) ‘Act’ means The Factories Act,1948.
(b) ‘Appendix’ means an appendix appendeed to these rules;
(c)‘Artificial humidification’means the introduction of moisture into the air by any artificial means whatsoever,except the unavoidable escape of steam or water vapour into the atmosphere directly due to the manufacturing process.
Provide that the introduction of air directly from outside through moistened mats or screens placed in openings at times when the temperature of the room is 26.50 degrees centigrade or more, shall not be deemed to be artificial humidification;
(d) ‘Belt’ includes ay driving strap or rope; (e) ‘Degrees (of temperature) means degrees on the centigrade scale; (f) ‘District Magistrate includes such other official as may be appointed by the State Government in that
behalf; (g) ‘Fume includes gas or vapour; (h) ‘Health Officer means the Municipal Health Officer or District Health Officer or such other Official
as may be appointed by the State Government in that behalf; (i)‘Hygrometer’ means an accurate wet and dry bulb hygrometer conforming to the prescribed conditions as regards constructions and maintenance;
(j) ‘Maintained means maintained in an efficient state, in efficient working order and in good repair; (K) ‘Manager’ means the person responsible to the Occupier for the working of the factory for the purposes of the Act; and (l) All words and expressions used in these rules but not defined shall have the same meaning as and when used in the Act.
Rule 2A;Prescribed 2A.Competent Person: (1) The Chief Inspector may recognise any person as a Under Clause (ca) of ‘Competent Person’ within such area and for such period as may be specified for the
Section2 & Section 112 purposes of carrying out tests, examinations, inspections and certification for such buildings, dangerous machinery,hoists and lifts ,lifting machines and lifting tackles,pressure plant,confined space, ventilation system and such other process or plant or equipment as stipulated in theAct and Rules made thereunder located in a factory,if such a person possesses the qualifications ,experience and other requirements as set out in the schedules I and II annexed to this Rule; Provided that the Chief Inspector may relax the requirements of qualifications in respect of a competent person if such a person is exceptionally experienced and knowledgeable,but not the requirements in respect of the facilities at his command; Provided further that where it is proposed to recognise a person employed under the Chief Inspector as a competent person, concurrence of the Stata Government shall be taken and such a person after being so recognised, shall not have the power of an Inspector; Provide further that the competent person recognised under the provision shall not be above the age of 62 and shall be physically fit for the purpose of carrying out tests,examinations and inspections.
![Page 9: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/9.jpg)
9 (2) The Chief Inspector may recognise an institution of repute,having persons possessing qualifications and experience as set out in the schedule annexed to sub rule (1) for the purpose of carrying out tests,examinations, inspections and certification for buildings,dangerous machinery,hoists and lifts,lifting machines and lifting tackles,pressure plant,confined space,ventilation system and such other process or plant and equipment as stipulated in the Act and the Rules made thereunder,as a competent person within such area and for such period as may be specified. (3) The Chief Inspector on receipt of an application in the prescribed form from a person or an institution intending to be recognised as a competent person for the purposes of this Act and the Rules made thereunder,shall register such application and within a period of sixty days of the date of receipt of application ,either after having satisfied himself as regards competence and facilities available at the disposal of the applicant recognise the applicant as a competent person and issue a certificate of competency in the prescribed form or reject the application specifying the reasons therefor. Every application for recognition (or renewal of recognition) of competent person (under each provision of) rule 2A shall be accompanied by a treasury challan receipt towards the remittance of a fee of Rs.250/-(two hundred &fifty only) into the local treasury. (4) The Chief Inspector may,after giving an opportunity to the competent person of being heard,revoke the certificate of competency: (i) if he has reason to believe that a competent person— (a) has violated any condition stipulated in the certificate of competency; or,
(b) has carried out a test, examination and inspection or has acted in a manner inconsistent with the intent or the purpose of this Act or the Rules made thereunder; or has ommitted to act as required under the Act and the Rules made thereunder; or,
(ii) for any othe reason to be recorded in writing.[ Explanation: for the purpose of this Rule,an institution includes an organisation] (5) The Chief Inspector may,for reasons to be recorded in writing, require recertification of lifting machines,lifting tackles,pressure plant or ventilation system,as the case may be,which has been certified by a competent person outside the State. SCHEDULE I FORM OF APPLICATION FOR GRANT OF CERTIFICATE OF COMPETENCY TO A PERSON UNDER SUB-RULE(1) OF RULE-2A 1. Name: 2. Date of birth: 3. Name of the Organisation (if not self-employed): 4. Designation: 5. Educational qualification (copies of testimonials to be attached): 6.Details of professional experience (In chronological order): ___________________________________________________________________________________________ Name of the organisation Period Designation Area of of service responsibility. ___________________________________________________________________________________________ ___________________________________________________________________________________________ 7. Membership ,if any,of professional bodies: 8. (i) Details of facilities(examination,testing etc.) at his disposal: (ii) Arrangement of callibrating and maintaining the accuracy of these facilities: 9. Purpose for which competency certificate is sought(Section or Sections of the Act should be stated): 10. Whether the applicant has been declared as a competent person under any Statute.(If so,furnish details): 11. Any other relevant information: 12. Declaration by the applicant: I,...................................................., hereby declare that the information furnished above is true. I undertake: (a) that in the event of any change in the facilities at my disposal (either addition or deletion) or my leaving the aforesaid organisation, I will promptly inform the Chief Inspector;
![Page 10: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/10.jpg)
10 (b) to maintain the facilities in good working order,callibrated periodically as per manufacturers instructions or as per National Standards; and, (c) to fulfil and abide by all the conditions stipulated in the certificate of competency and instructions issued by the Chief Inspector from time to time. Place and Date. Signature of the Applicant. Declaration by the Institution (if employed) I,..............................................................................,certify that Shri.........................................................,whose details are furnished above,is in our employment and nominate him on behalf of the organisation for the purpose of being declared as a competent person under the Act. I also undertake that I will: (a) notify the Chief Inspector in case the competent person leaves our employment; (b) provide and maintain in good order all facilities at his disposal as mentioned above; (c) notify the Chief Inspector of any change in the facilities (either addition or deletion). Signature.............................. Designation.......................... Telephone No...................... Date................. Office seal :FORM OF APPLICATION FOR GRANT OF COMPETENCY TO AN INSTITUTION UNDER SUB-RULE (2) OF RULE 2A: 1. Name and full address of the Organisation: 2. Organisation’s status(specify whether Government, : Autonomous,Co-operative,Corporate or Private) 3. Purpose for which competency certificate is sought :
[Specify Section(s) of the Act] 4. Whether the Organisation has been declared as a : competent person under this or any other statute. If so, five details. 5. Particulars of the persons employed and possessing : qualification and experience as set out in Schedule annexed to Sub-rule(1) of Rule 2A. ___________________________________________________________________________________________ Sl.No. Name and Desigation Qualification Experience Section(s) and the Rules under which competency sought for. ___________________________________________________________________________________________ 1. 2. . . ___________________________________________________________________________________________ 6. Details of faclities (relevant to item 3 above) and :
arrangement made for their maintenance and period of callibration. 7. Any other relevant information : 8. Declaration :
I,.......................................................................hereby, on behalf of.................................................... .......... certify that the details furnished above are correct to the best of my knowledge. I undertake to ― (i) maintain the facilities in good working order,calibrate periodically as per manufacturer’s instructions or as per National Standards; and (ii) fulfil and abide by all the conditions stipulated in the certificate of competency and instructions issued by the Chief Inspector from time to time.
![Page 11: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/11.jpg)
11 Signature of the Head of the Institution or of the person authorised to sign on his behalf Place and Date Designation: ***************** FORM OF CERTIFICATE OF COMPETENCY ISSUED TO A PERSON OR AN INSTITUTION IN PURSUANCE TO RULE 2A MADE UNDER SECTION 2(ca) READ WITH SECTION............ I,..........................................................................in exercise of the powers conferred on me under section 2(ca) of the Factories Act and the Rules made thereunder,hereby recognise........................................................................... ..................................(Name of the Institution) or Shri...............................................................................(Name of the person),employed in.........................................................................(Name of the organisation) to be a competent person for the purpose of carrying out tests,examinations,inspections and certification for such buildings,dangerous machinery,lifts and hoists,lifting machines and lifting tackles,pressure plants,confined space,ventilation system and process or plant or equipment, as the case may be,used in a factory located in......................................................under Section...............and Rules made thereunder.* [*Strike out the words not applicable] This certificate is valid from......................to..................... This certificate is issued subject to the conditions stipulated hereunder:—
(i) Tests, examinations and inspections shall be carried out in accordance with the provisions of the Act and Rules made thereunder;
(ii) Tests,examinations and inspections shall be carried out under the direct supervsion of the competent person or by a person so authorised by an institution recognised to be a competent person;
(iii) The certificate of competency issued in favour of a person shall stand cancelled if the person leaves the organisation mentioned in his application;
(iv) The institution recognised as a competent person shall keep the Chief Inspector informed of the names,designations and qualifications of the persons authorised by it to carry out tests,examinations and inspections.
Station: Office seal Signature of the Date: Chief Inspector. Note: A seperate certificate should be issued under each relevant Section. A person or an institution may be recognised as competent person for the purpose of more than one Section of the Act. ************
SCHEDULE II Serial Section or Rule under Qualification Experience required Facilities at No. Which competency required his command Is required (1) (2) (3) (4) __________________________________________________________________________________________ 1. Rules made under Sect- Degree in (i)A minimum of ten years of exp- Section 6 and section112 Civil or -erience in Design,Construction, (Certificate of stability Structural Testing or Repairs of structures. for buildings). Egineering (ii)Knowledge of Non-Destructive xxxxxxx or Testing,various Codes of practices equivalent that are current and the effect of vibrations and natural forces on the stability of the buildings;and (iii)Ability to arrive at a reliable conclusion with regards to the safety of the structures or the buildings.
2. Rules made under Degree in (i)A minimum of seven years exper- Gauges for measur- Section 21(2) Electrical -ience in- -ement; instrument
![Page 12: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/12.jpg)
12 [Dangerous or (a)Design or operation or mainte- for measurement of Machines] Mechanical -nance,or speed and any other or (b)Testing,examination and insp- equipment or device Textile -ection of relevant machinery,their to determine the safety Engineering guards, safety devices and in the use of dangerous Or machines. equivalent (ii)He shall- (a)be conversant with safety devices and their proper functioning; (b)be able to defects and any other cause leading to failure;and (c)have ability to arrive at a reliable conclusion with regards to the proper functioning of the safety devices, appliances and machine guards.
3. Section 28(Lifts Degree in (i) A minimum experience of seven Facilities for load testing, and Hoists) Electrical years in: tensile testing, gauges/
and/or (a) Design or erection or maintenance; equipments/ gadgets for Mechanical or, measurement and any other Engineering (b) Inspection and test procedures of equipment required for or its Lifts & Hoists determining the safe equivalent (ii) He shall be―(a) Conversant with working conditions of the relevant Codes of practices and test Hoists and Lifts. procedures that are current; (b) Conversant with other statutory requirements covering the safety of Hoists and lifts; (c) able to identify defects and arrive at a reliable conclusion with regards to the safety of Hoists and Lifts.
4. Section 29(Lifting Degree in (i) A minimum of seven years of exp- Facilities for Load machinery and Lifting Mechanical -erience in: testing, tensile testing,
tackles). or (a) Design or erection or maintena- heat treatment, Electrical -nance,or equipment/gadget
or (b) Testing,examination and inspection for measurement, Metallurgical of Lifting machinery,Chains,ropes gauges and such Engineering and lifting tackles; other equipment
or its (ii) He shall be:― to determine the safe equivalent (a) conversant with the relevant Codes of working conditions of
practices and test procedures that are lifting machinery and current. lifting tackles.
(b) Conversant with Fracture Mec- -hanics and metallurgy of the material of constuction.
(c) Conversant with heat treatment / stress-relieving techniques as applic- -able to stress bearing components and parts of Lifting machinery and Lifting tackles. (d)capable of identifying defects and arriving at a reliable conclusion with reg- -ards to the safety of lifting machinery, chains,ropes and lifting tackles. 5. Section 31 Degree in (i) A minimum experience of ten years Facilities for carryi- [Pressure Chemical/ in:- -ng out hydraulic test, Plant] Electrical (a)Design or erection or maintenance; or non-destructive test, Metallurgical/ (b) Testing, examination and inspection gauges, equuipments/ Mechanical of Pressure Plants. gadgets for measure- Engineering -ment and any other
![Page 13: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/13.jpg)
13 Or its equipment or gauges equivalent. to determine the safe- (ii) He shall be:- -ty in the use of (a) Conversant with the relevant Codes Pressure Vessels. of practices and test procedures relating to pressure vessels; (b)Conversant with statutory requrements concerning the safety of unfired pressure ves- -sels and equipment operating under pressure; (c) Conversant with non-destructive testing techniques as are applicableto pressure vessels; (d) able to identify defects and arrive at a reliable conclusion with regards to the safety of pressure plants. 6. (i) Section 36 Master’s (i) A minimum experience of seven years Meters,instrume- [Precautions against Degree in in collection and analysis of environmental ments and devices dangerous fumes] Chemistry samples and calibration of monitoring equ- duly callibrated and or a Degree -ipment; certified for carrying
in Chemical out the test and certi- Engineering -fication of safety in
(ii) Rules made under: confined spaces. Section 41 & 112 (ii) He shall:- concerning: (a) be conversant with the hzardous prop- (a) Ship building and -erties of chemicals and their permissible Ship repairs. limit values; (b) Handling and pr- (b) be conversant with the current techniques -ocessing of asbestos. Of sampling and analysis of the environmental (c) Manufacture of rayon contaminants; and by viscous process. (c) be able to arrive at a reliable conclusion (d)Foundry operations as regards the safety of entering and carrying out hot work. 7. Ventilation system as Degree in (i) A minimum of seven years experience in Facilities for testing the required under various Mechanical/ the design,fabricatoion,installation,testing ventilation system, instr- Schedules framed Electrical of ventilation system and systems used for -uments and gauges under Section 87, Engineering extraction and collection of dusts,fumes and for testing the effectiven- such as Scedules on:- or its vapours and other ancillary equipment. -ess of the extraction syst- (i) Grinding or glazing equivalent. (ii) He shall be conversant with relevant Co- -ems for dusts, vapours
of metals and processes -des of practice and test procedures that are and fumes and any other incidental thereto; current in respect of ventillation and a traction equipment needed for system for fumes, and shall be able to arrive determining the efficien- at a reliable conclusion with regards to the -cy and adequacy of the- effectiveness of the system. -se systems. He shall have the assistance of a (ii) cleaning or smoothening , suitably qualified techn- roughening etc. of articles by -ical person who can jet of sand, metal shot , grit or come to a reasonable other abrasive propelled by a conclusion as to the blast of compressed air or steam. adequacy of the system. ______________________________________________________________________________________ Rules 3 to 13 3. Submission of Plans:- The State Government or the Chief Inspector of Factories may require, prescribed for the purpose of the Act, submission of plans of any factory which was either in existence on Under Sub-section the date of commencement of the Act or which has not been constructed or extended since then. (1) of Section 6 Such plans shall be drawn to scale showing:—
(a) the site of the factory and immediate surroundings including adjacent buildings and other structures,roads,drains etc.
(b) The plan,elevation and necessary cross sections of the factory buildings indicating all relevant details relating to natural lighting,ventilation and means of escape in case of fire,and the position of the plant and machinery,aisles and passageways; and
![Page 14: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/14.jpg)
14 (c)Such other particulars as the State Government or the Chief Inspector,as the case may
be,may require. 4.Approval of Plans:- (1) No site shall be used for the location of a factory or no building in a factory be constructed,reconstructed,extended or taken into use as a fatory or part of a factory,or any other extension of plant or machinery carried out in a factory unless previous permission in writing is obtained from the State Government or the Chief Inspector.
(2) Application for such permission shallbe made inForm No.1 which shall be accompanied by the following documents:—
(a) A Flow Chart of the manufacturing process supplemented by a brief description of the process in its various stages;
(b) plans,in duplicate,drawn to scale showing:— (i) the site of the factory and immediate surroundings including adjacent buildings and other structures,
roads,drains etc.;and (ii) the plan,elevation and necessary cross section of the various buildings indicating all relevant details
relating to natural lighting,ventilation and means of escape in case of fire. The plans shall also clearly indicate the position of the plant and machinery,aisles and passage-ways;and
(c) such other particulars as the Chief Inspector may require. (3) If the Chief Inspector is satisfied that the plans are in consonance with the requirements of the Act he
shall,subject to such conditions as he may specify,approve them by signing and returning to the applicant one copy of each plan; or he may call for such other particulars as he may require to enable such approval to be given. 4A. Certificate Of Stability:- (1) No manufacturing process shall be carried on in any building of a factory constructed,reconstructed or extended ,or in any building which has been taken into use as a factory or part of a factory until a certificate of stability in respect of that building in the Form given below has been sent by the Occupier or Manager of the factory to the Chief Inspector and accepted by him:— FORM OF CERTIFICATE OF STABILITY
1. Name of the factory................................................................................................... 2. Village, town and district in which the factory is situated........................................ 3. Full postal address of the factory............................................................................... 4. Name of the occupier of the factory.......................................................................... 5. Nature of manufacturing process to be carried on in the factory.............................. 6. Number of floors on which workers will be employed.............................................
I have inspected the premises of the factory on......................and examined the building/buildings and other
structures.The details of the building / buildings and other structures are specified in the schedule appended. I certify that it is / they are found to be structurally sound and that its / their stability will not be endangered by its / their use as factory / part of factory.
Signature Qualification: Address of Association:
The Certificate of stability referred to in sub-rule(1) shall be signed by one of the following categories of persons, namely:—
(i) A member of the Associate Members of Institute of Civil Engineers.Or, (ii) A member of the Institute of Structural Engineers. Or, (iii) A full member or Associate Member of the Institute of Engineers (India). Or, (iv) Civil Engineers of the Public Works, Electricity and Highways Department including
retired Civil Engineers not below the rank of Executive Engineer. 5.Application for registration and grant of licence: The occupier of every factory shall submit to the Chief Inspector an application in Form No. 2 for the registration of the factory and grant of a licence.
Provided that the Occupier of premises in use as a factory on the date of the commencement of these rules shall submit such application within 30 days from the date of the commenncement of these rules. 6.Grant of a licence: (1) A licence to work a factory may be granted by the Chief Inspector in Form 3 prescribed for the purpose and on payment of the fees specified in the schedule hereto,
![Page 15: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/15.jpg)
15 provide that where the Chief Inspector refuses to grant or renew a licence,he shall record in writing the reasons for such refusal and communicate the same to the occupier. (2) Every licence granted under this chapter shall remain in force upto the 31st of December of the year for which the licence is granted. (3) The licence or a copy thereof attested by an Inspector shall be exhibited at a conspicuous place inside the factory near the main entrance.
SCHEDULE A Scale of fees payable for grant of licence and annual renewal thereof for factories defined under Sections 2(m) and 85 of the Factories Act, 1948 other than Electricity Generating (or transforming ) Stations:- Quantity of Number of (maximum) persons to be employed on any one day during the year (maximum) (1) (2) (3) (4) (5) (6) (7) (8) K.W.installed ______________________________________________________________________________ 20 50 100 250 500 750 1000 Above1000 _________________________________________________________________________________________ (K.W) Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Nil - 400 - 600 - 1000 - 1600 - 1800 - 2250 - 2400 - 2550 10 - 800 - 1050 - 1375 - 1700 - 2100 - 2475 - 2875 - 3650 50 - 1050 - 1375 - 1700 - 2100 - 2475 - 2875 - 3650 - 5400 100 - 1375 - 1700 - 2100 - 2475 - 2875 - 3650 - 5400 - 6700 250 - 1700 - 2100 - 2475 - 2875 - 3650 - 5400 - 6700 - 8050 500 - 2100 - 2475 - 2875 - 3650 - 5400 - 6700 - 8050 - 9400 1000 - 2475 - 2875 - 3650 - 5400 - 6700 - 8050 - 9400 - 12100
Above 1000- 4050 - 5400 - 6700 - 8050 - 9400 - 10750 - 12100 - 13400 SCHEDULE B Scale of fees payable for grant of licence and annual renewal thereof for Electricity Generating (or transforming)
Stations:- Total installed capacity of the Number of workers to be employed Fees payable Generating/Transforming Station 0n any one day during the year (1) (2) (3) ____________________________________________________________________________________________ (K.W) (Rs)
50 - 10 or above - 240 100 - Do - 450 150 - Do - 575 300 - Do - 750 750 - Do - 900 1000 - Do - 1020 5000 - Do - 1680 10,000 - Do - 2250 50,000 - Do - 2800
Above 50,000 - Do - 3375 7. Amendment of licence: (1) A licence granted under rule 6 or renewed under rule 8 may be amended by the Chief Inspector. (2) A Licensee who desires to have his licence amended shall submit it to the Chief Inspector with an application stating the nature of the amendment and reasons therefor. (3) The fee for the amendment of a licence shall be fifty rupees plus the amount (if any) by which the fee that would have been payable if the licence had originally been issued in the amended form,exceeds the fee originally paid for the licence. Provided that the Occupier of premises in use as a factory on the date of the commencement of these rules shall submit such application within thirty days from the date of the commencement of these rules. 8. Renewal of licence: (1) A licence may be renewed by the Chief Inspector. (2) Every application for the renewal of a licence shall be in Form 2,in duplicate,and shall be made not less than two months before the date on which the licence expires,and,if the application is so made,the premises shall be held to be duly licensed until such date as the Chief Inspector renews the licence. (3) The same fee shall be charged for the renewal of a licence as for the grant thereof:
![Page 16: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/16.jpg)
16 Provided that if the application for renewal is not received within the time specified in sub-rule(2), the licence shall be renewed only on payment of a fee 25 percent in excess of the fee ordinarily payable for the licence. (4) Every licence renewed under this rule shall remain in force upto 31st December of the year for which the licence is renewed. 9. Transfer of licence: (1) The holder of a licence may,at any time before the expiry of the licence apply for permission to transfer a licence to another person. (2) Such application shall be made to the Chief Inspector who shall,if he approves of the transfer,enter upon the licence under his signature,an endorsement to the effect that the licence has been transferred to the person named. (3) A fee of fifty rupees shall be charged on each such application. 10. Procedure on death or disabiliy of licensee: If a licensee dies or becomes insolvent, the person carrying on the business of sush licensee shall not be liable to any penalty under the Act for exercising the powers granted to the licensee by the licence during such time as may reasonably be required to allow him to make an application for the amendment of the licence under rule 7 in his own name for the unexpired portion of the original licence. 11. Loss of licence: Where a licence granted under these rules is lost or accidentally destroyed,a duplicate may be granted on payment of a fee of rupees fifty. 12.Payment of fees: (1) Every application made under these rules shall be accompanied by a treasury receipt showing that the appropriate fee has been paid into the local treasury,under the Head of account: “B-Social Services-0230 Labour & Employment-104-Fees realised under the Factories Act (a)-Registration Licence fees-(b)Factories Licence fees-(c)Fines.” Provided that the appropriate fee may alternately be paid by a crossed cheque or a bank draft on any nationalised bank or by a postal order drawn in favour of the Chief Inspector. (2) If an application for the grant,renewal or amendment of a licence is rejected,the fee paid shall be refunded to the applicant. 13. Prohibition of use of a premises as factory without a valid licence: An occupier shall not use any premises as a factory or carry on any manufacturing process in a factory unless a licence has been issued in respect of such premises and is in force for the time being; provided that if a valid application for grant of licence or renewal thereof has been submitted and the required fee has been paid, the premises shall be deemed to be fully licensed until such date as the Chief Inspector grants or renews the licence or refuses in writing to grant or renew the licence. Form prescribed 14. Notice of occupation: The notice of occupation shall be in Form 2. Under sub-section(1) Of Secction7 Form prescribed 15.Notice of change of Manager: The notice of change of manager shall be in Form 4. under sub-section(4). Of Section and Section 112. 15A. Guidelines,instructions and records: (1) without prejudice to the general responsibility of the occupier to comply with the provisions of Section 7A the Chief Inspector may,from time to time,issue guidelines and instructions regarding the general duties of the occupier relating to health,safety and welfare of all workers while they are at work in the factory. (2) The occupier shall maintain such records,as may be prescribed by the Chief Inspector,in respect of monitoring of working environment in the factory.
CHAPTEER II Rules prescribed Inspecting Staff Under Sub-section(1) 16. Qualifications of Chief Inspector,Deputy Chief Inspector,Senior Inspecor and of Section 8 Inspector of Factories : (a) Qualification of Chief Inspector of Factories: No person shall be appointed to the post of Chief Inspector of Factories unless he has obtained a Degree in Mechanical Engineering or any qualification declared by the Union or State Public Service Commission as equivalent thereof and has served for not less than 7(seven) years as Deputy Chief Inspector of Factories under the Factories Act.
![Page 17: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/17.jpg)
17 (b) Qualification of Deputy Chief Inspector of Factories: No person shall be appointed to the post of Deputy Chief Inspector of Factories unless he has the requisite qualifications of an Inspector and has worked as Senior Inspector for not less than 5 (five) years. (c) Qualification of Senior Inspector Of Factories: No person shall be appointed to the post of Senior Inspector Of Factories unless he has the requisite qualification of an Inspector and worked as Inspector for not less than 5 (five) years. (d) Qualification of an Inspector: No person shall be appointed to the post of an Inspector Of Factories unless he has obtained a Degree in Mechanical Engineering of a recognised University or any qualification declare by the Union or State Public Service Commission as equivalent thereof.
Rule prescribed 17. Powers of Inspectors: An Inspector shall, for the purpose of the execution of the Act, Under Section 9 have power to do all or any of the following things,that is to say— (a) to photograph any worker,to inspect,examine,measure,copy,photograph,sketch or test,as the case may be any building or room,any plant,machinery,appliance or apparatus,any register or document,or anything provided for the purpose of securing the health,safety or welfare of the workers employed in a factory; (b) in the case of an Inspector who is a duly qualified medical practitioner,to carry out such medical examinations, as may be necessary, for the purpose of his duties under the Act;
(c) to seize any record or document for the purposes of examination and satisfying himself that the provisions of the Act and the rules thereunder were complied with or which he may consider relevant in respect of any offence under the Act which he may have reasons to believe or suspect has been committed by the occupier or the manager; (d) to direct by an order in writing the occupier or the manager to produce either personally or through his agent any prescribed record or register at his office or any other place where he may be temporarily camping or at any other convenient place; (e) to direct by an order in writing the manager or the occupier or any other employee of a factory to appear before him personally at his office or at the place where he may be temporarily camping or at any other place,to be examined and interrogated by him on any matter connected with the compliances of the provisions of the Act or the Rules. Rule prescribed 18. Duties of Certifying Surgeon:(1) For the purpose of the examination and certification of under sub-section(4) young persons who wish to obtain Certificate of Fitness, the Certifying Surgeon shall of section 10 arrange a suitable time and place for the attendance of such persons,and shall give previous notice in writing of such arrangements to the manager of factories situated within the local limit assigned to him. (2) The Certifying Surgeon shall issue his certificates in Form 5. The foil and counterfoil shall be filled in and the signature or the left thumb impression of the person in whose name the certificate is granted shall be taken on them. On being satisfied as to the correctness of the entries made therein and of the fitness of the person examined,he shall sign the foil and initial the counterfoil and shall deliver the foil to the person in whose name the certificate is granted. The foil so delivered shall be the certificate of fitness granted under Section 69. All counterfoils shall be kept by the Certifying Surgeon for a period of at least two years after the issue of the certificate. (3) The Certifying Surgeon shall,upon request by the Chief Inspector,carry out such examination and furnish him with such report as he may indicate,for any factory or class or description of factories where— (a) cases of illness have occurred which it is reasonable to believe are due to the nature of the manufacturing process carried on or other conditions of work prevailing therein; or (b) by reason of any change in the manufacturing process carried on,or in the substances used therein, or by reason of the adoption of any new manufacturing process or of any new substance for use in a manufacturing process,there is a likelyhood of injury to the health of workers employed in that manufacturing process; or (c) young persons are or are about to be,employed in any work which is likely to cause injury to their health. (4) For the purpose of examination of persons employed in processes covered by the rules relating to dangerous operation the Certifying Surgeon shall visit the factories within the local limits assigned to him at such intervals as are prescribed by the rules relating to such dangerous operations. (5) At such visits,the Certifying Surgeon after examining a worker shall issue a certificate of fitness in Form 28. The record of examination and re-examinations carried out shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2) including the nature and the results of the tests,shall also be entered by the Certifying Surgeon in a Health Register in Form 29. (6) If the Certifying Surgeon finds as a result of his examination that any person employed in such process,is no longer fit for medical reasons to work in the process,he shall suspend such persons from working in that process for such time as he may think fit and no person after suspension shall be employed in that process without the written sanction of the Certifying Surgeon in the Health Register. (7) The Manager of a factory shall afford to the Certifying Surgeon facilities to inspect any process in which any person is employed or is likely to be employed.
![Page 18: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/18.jpg)
18 (8) The Manager of a factory shall provide for the purpose of any medical examination which the Certifying Surgeon wishes to conduct at the factory (for his exclusive use on the occasion of an examination) a room which shall be properly cleaned and adequately ventilated and lighted and furnished with a screen,a table (with writing materials) and chairs. ____________________________________________________________________________________________ CHAPTER III Health Register prescribed 19. Record of white washing etc.: The record of dates on which white washing , colour under Sub-section washing, varnishing etc. are carried out shall be entered in a Register and maintained in (1) of Section 11 Form 7.
Exemption 20.Cleanliness of walls and ceiling: (1) Clause (d) of sub-section(1) of Section 11 of the under Sub-sectin(2) Act shal l not apply to the class or description of factories specified in the Schedule of Section (11) hereto:— Provided that they are kept in a clean state by washing, sweeping, brushing, dusting, vacuuam cleaning or other effective means:
Provided further that the said clause(d) shall continue to apply— (a) as respect factories or parts of factories specified in part A of the said schedule,to workrooms in which the amount of cubic space allowed for every person employed in room is less than 14.20 Cubic meters; (b) as respects factories or parts of factories specified in part B of the said Schedule,to workrooms in which the amount of cubic space allowed for every person employed inthe rooms is less than 70.80 Cubic meters; (c) to engine-houses,fitting shop,lunchrooms,canteens,shelters,creches,cloakrooms,restroms and washing places; and (d) to such parts of walls,sides and top of passages and staircases as are less than six meters and above the floor or stair. (2) If it appears to the Chief Inspector that any part of a factory,to which by virtue of sub-rule(1) any of the provisions of the said clause(d) do not apply or apply as varied by sub-rule(1),is not being kept in a clean state,he may,by written notice,require the occupier to whitewash or colourwash,paint or varnish the same,and in the event of the occupier failing to comply with such requisition within two months from the date of the notice,sub-rule(1) shall cease to apply to such part of a factory,unless the Chief Inspector otherwise determines. SCHEDULE Part A 1. Blast furnaces 4.Chemical works. 2.Brick and the work in which unglazede bricks or tiles are made.
5. Copper mills.
3. Cement works. 6. Gas works. 7. Iron and steel mills. 8. Stone slate and marble works. 9. The following parts of factories:— (a) Rooms used only for the storage of articles. (b) Rooms in which the walls or ceilings consists of galvanized iron, glazed bricks, glass, slate, asbestos, bamboo, or thatch. (c) Parts in which dense steam is continuously evolved in the process. (d) Parts in which pitch,tar or like materials are manufactured or are used to a substantial extent,except in brush works. (e) Parts of glass factory known as glass house. (f) Rooms in which graphite is manufactured or is used to a substantial extent in any process. (g) Partrs in which coal, coke, oxide of iron, ochre, lime or stone is crushed or ground. (h) Parts of wall, partition, ceilings or tops of rooms which are at least 6 metres above the floor. (i) Ceilings or tops of rooms in print work, bleach work or dye works with the exception of finishing rooms or warehouses (j) Inside walls of oil mills below a height of 1.5 metres from the ground floor level. (k) Inside walls of tanneries below a height of 1.5 metres from the ground floor level where a wet process is carried on.
![Page 19: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/19.jpg)
19 Part B 1. Coach and motor body works. 5. Foundries other than foundries in which brass casting
is carried on. 2. Electric generating or transforming stations. 6. Gun factories. 3. Engineering works. 7. Shipbuilding works. 4. Factories in which sugar isa refined or manufactured. 8.Those parts of factories where unpainted or
unvarnished wood is manufactured, ____________________________________________________________________________________________ Rules prescribed 21. Disposal of Trade Wastes and Effluents : The arrangements made in every factory for the Under Sub-section(2) treatment of wastes and effluents due to the manufacturing processes carried on therein shall Of Section 12 be in accordance with those approved by the relevant Water and Air Pollution Boards appointed under the Water (Prevention and Control Of Pollution) Act,1974 and the Air (Prevention and Control Of Pollution) Act,1981 and other appropriate authorities. Rules prescribed 22. Ventilation and Temperature: Under Section 13 (1) Limits of temperature and air movement:— In any factory the maximum wet-bulb temperature of air in a work room at a height of 1.5 metres above the floor level shall not exceed 30 Degrees Centigrade and adequate air movement of at least 30 metres per minute shall be provided; and in relation to dry-bulb temperature, the wet-bulb temperature in the work room at the said height shall not exceed that shown in the schedule annexed hereto, or as regards a dry-bulb reading intermediate between the two dry-bulb readings that specified in relation to the higher of these two dry-bulb readings; SCHEDULE Dry-bulb temperature Wet-bulb temperature (Degrees Centigrade) (Degrees Centigrade) 30 to 34 29 35 to 39 28.5 40 to 44 28 45 to 47 27.5 Provided that if the temperature measured with a thermometer inserted in a hollow glove of 15 centimeters diameter coated mat black outside and kept in the environment for not less than 20 minutes exceeds the dry-bulb temperature of air, the temperature so recorded by the globe thermometer shall be taken in place of the dry-bulb temperature: Provide further that when the reading of the wet-bulb temperature outside in the shade exceeds 27 degrees centigrade, the value of the wet-bulb temperature allowed in the schedule for a given dry-bulb temperature may be correspondingly exceeded to the same extent. Provided further that this requirement shall not apply in respect of factories covered by Section 15 of the Act and in respect of factories where the nature of work carried on involves production of excessively high high temperatures referred to in clause(ii) of Sub-section(1) to which workers are exposed for short periods of time not exceeding one hour followed by an interval of sufficient duration in thermal environments not exceeding those otherwise laid down in this rule: Provide further that the Chief Inspector, having due regard to the health of the workers, may in special and exceptional circumstances, by an order in writing exempt any factory or part of a factory from the foregoing requirement, in so far as restricting the thermal conditions within the limits laid down in the schedule are concerned to the extent that he may consider necessary subject to such conditions as he may specify. (2) Provision of thermometers:— (a) If it appears to the Inspector that in any factory, the temperature of the air in a work room is sufficiently high and is likely to exceed the limits prescribed in sub-rule(1), he may serve on the Manager of the factory an order requiring him to provide sufficient number of whirling hygrometers or any other type of hygrometers and direct that the dry-bulb and wet-bulb readings in each such workroom shall be recorded at such positions as approved by the Inspector twice during each working shift by a person especially nominated for the purpose by the Manager and approved by the Inspector. (b) If the Inspector has reasons to believe that a substantial amount of heat is added inside the environment of a work room by radiation from walls, roof or other solid surroundings, he may serve on the Manager of the factory an order requiring him to provide one or more globe thermometers referred to in the first provisio in
![Page 20: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/20.jpg)
20sub-rule(1) and further requiring him to place the globe thermometers at places specified by him and keep a record of the temperatures in a suitable Register. (3) Ventilation:- (a) In every factory the amount of ventilating openings in a workroom below the caves shall,except where mechanical means of ventilation as required by clause(b) below are provided, be of an aggregate area of not less than 15 per cent of the floor area and so located as to afford a continued supply of fresh air: Provided that the Chief Inspector may relax the requirements regarding the amount of ventilating openings if he is satisfied that having regard to the location of the factory, orientation of the workroom, prevailing winds, roof height and the nature of the manufacturing process carried on, sufficient supply of fresh air into the workroom is afforded during most part of the working time: Provided further that this requirement shall not apply in respect of workrooms of factories- (i) covered by Sectioin 15; or (ii) in which temperature and humidity are controlled by refrigeration. (b) Where in any factory owing to special circumstances such as situation with respect to adjacent buildings and height of the building with respect to floor space, the requirements of ventilation opening under clause(a)of this sub-rule cannot be complied with or in the opinion of the Inspector and the temperature of air in a workroom is sufficiently high and is likely to exceed the limits prescribed in sub-rule(1) he may serve on the Manager of the factory an order requiring him to provide additional ventilation either by means of roof ventilators or by mechanical means. (c) The amount of fresh air supplied by mechanical means of ventilation in an hour shall be equivalent to at least six times the cubic capacity of the workroom and shall be distributed evenly throughout the workroom without dead airpockets or undue draughts caused by high inlet velocities. (d) In regions where in summer(15th march-15th July) dry-bulb temperatures of outside air in the shade during most part of the day exceed 35 degrees centigrade and simultaneous wet-bulb temperatures are 25 degrees centigrade or below and in the opinion of the Inspector the manufacturing process carried on in the workroom of a factory permits thermal environments with relative humidity of 50 percent or more, the Inspector may serve on the Manager of the factory an order to have sufficient supply of outside air for ventilation cooled by passing it through water sprays either by means of unit type of evaporative air-coolers(Desert coolers) or where supply of outside air is provided by mechanical means through ducts in a plenum system, by means of central air washing plants. Rules 23 to 33 23 When artificial humidification not allowed: There shall be no artificial humidification in any Prescribed under room of a cotton spinning or weaving factory- Sub-section(1) (a) by the use of steam during any period when the dry-bulb temperature of that room Of Section15 exceeds 29.5 degrees centigrade; and (b) at any time when the wet-bulb reading of the hygrometer is higher than that specified in the following schedule in relation to the dry-bulb reading of the hygrometer at that time; or as regards a dry-bulb reading intermediate between any two dry-bulb readings indicated consecutively in the schedule when the dry-bulb reading does not exceed the wet-bulb reading to the extent indicated in relation to the lower of these two dry-bulb readings:—
SCHEDULE
Readings in degrees centigrade
Dry-bulb Wet-bulb Dry-bulb Wet-bulb Dry-bulb Wet-bulb 15.5 14.5 25.0 24.0 34.5 30.0 16.0 15.0 25.5 24.5 35.0 30.5 16.5 15.5 26.0 25.0 35.5 31.0 17.0 16.0 26.5 25.5 36.0 31.0 17.5 16.0 27.0 26.0 36.5 31.5
18.0 16.5 27.5 26.0 37.0 31.5 18.5 17.0 28.0 26.5 37.5 31.5 19.0 18.0 28.5 27.0 38.0 32.0 19.5 18.5 29.0 27.0 38.5 32.0 20.0 19.0 29.5 28.0 39.0 32.0 20.5 19.5 30.0 28.0 39.5 32.5 21.0 20.0 30.5 28.5 40.0 32.5 21.5 20.5 31.0 28.5 40.5 33.0 22.0 21.0 31.5 29.0 41.0 33.0 22.5 21.0 32.0 29.0 41.5 33.0 23.0 21.5 32.5 29.5 42.0 33.0
![Page 21: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/21.jpg)
21 23.5 22.0 33.0 29.5 42.5 33.0 24.0 23.0 33.5 29.5 43.0 33.5 24.5 23.5 34.0 30.0 43.5 33.5 Provided, however, that clause(b) shall not apply when the difference between wet-bulb temperature as indicated by the hygrometer in the department concerned and the wet-bulb temperature taken with a hygrometer outside in the shade is less 2 Degrees. 24. Provision of hygrometers: In all departments of cotton spinning and weaving mill wherein artificial humidification is adopted, hygrometers shall be provided and maintained in such positions as are approved by the Inspector. The number of hygrometer shall be regulated according to the following scale:— (a) Weaving department: —one hygrometer for departments with less than 500 looms, and one additional hygrometer for every 500 or part of 500 looms in excess of 500. (b) Other departments:— One hygrometer for each room of less than 85,000 cubic meters capacity and one extra hygrometer for each 5,670 cubic meters or part thereof, in excess of this. (c) One additional hygrometer shall be provided and maintained outside each cotton spinning and weaving factory wherein artificial humidification is adopted, and in a position approved by the Inspector for taking hygrometer shade readings. 25. Exemption from maintenance of hygrometers: When the Inspector is satisfied that the limits of humidity allowed by the schedule to Rule 23 are never exceeded, he may, for any department other than the weaving department, grant exemption from the maintenance of the hygrometer. The Inspector shall record such exemption in writing. 26. Copy of schedule to Rule 23 to be affixed near every hygrometer: A legible copy of the Schedule to Rule 23 shall be affixed near each hygrometer. 27. Temperature to be recorded at each hygrometer: At each hygrometer maintained in accordance with Rule 24, correct wet and dry-bulb temperatures shall be recorded thrice daily during each working day by competent persons nominated by the Manager and approved by the Inspector.The temperature shall be taken between 7 A.M. and 9 A.M., between 11 A.M. and 2 P.M. (but not in the rest interval) and between 4 P.M. and 5.30 P.M. In exceptional circumstances, such additional readings and between such hours as the Inspector may specify, shall be taken. The temperatures shall be entered in a Humidity Register in the prescribed Form 8, maintained in the factory. At the end of each month, the persons who have taken the readings shall sign the Register and certify in the Register the correctness of the entries. The Register shall always be available for inspection by the Inspector. 28. Specifications of hygrometer: (1) Each hygrometer shall comprise of two mercurial thermometers of wet-bulb and dry-bulb of similar constructions, and equal in dimensions, scale and divisions of scale. They shall be mounted on a frame with a suitable reservoir containing water. (2) The wet bulb shall be closely covered with a single layer of muslin, kept wet by means of a wick attached to it and dropping into the water in the reservoir. The muslin covering and the wick shall be suitable for the purpose, clean and free from size or grease. (3) No part of the wet-bulb shall be within 76 millimeters from the dry-bulb or less than 25 millimeters from the surface of the water in the reservoir and the water-reservoir shall be below it, on the side of it away from the dry-bulb. (4) The bulb shall be spherical and of suitable dimension and shall be freely exposed on all sides to the air of the room. (5) The bores of the stem shall be such that the position of the top of the mercury column shall be readily distinguishable at a distance of 60 centimeters. (6) Each thermometer shall be graduated so that accurate readings may be taken between 10 and 50 degrees centigrade. (7) Every degree from 10 degrees upto 50 degrees shall be clearly marked by horizontal lines on the stem, and each fifth degree shall be marked by longer marks than the intermediate degrees, and the temperature marked opposite each fifth degree i.e. 10,15,20,25,30,35,40,45,50. (8) The markings as above shall be accurate, that is to say, at no temperature between 10 and 50 degrees, shall the indicated readings be in error by more than one ninth of a degree. (9) A distinctive number shall be indelibly marked upon the thermometer. (10) The accuracy of each thermometer shall be certified by the National Physical Laboratory, Delhi, or some Competent Authority appointed by the Chief Inspector and such certificate shall be attached to the Humidity Register.
![Page 22: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/22.jpg)
22 29. Thermometers to be maintained in the efficient order: Each thermometer shall be maintained at all times during the period of employment in efficient working order, so as to give accurate indication; and in particular— (a) the wick and the muslin covering of the wet bulb shall be renewed once a week, (b) the reservoir shall be filled with water which shall be completely renewed once a day. The Chief Inspector may direct the use of distilled water or pure rain water in any particular mill or mills in certain localities, and (c) no water shall be applied directly to the wick or covering during the period of employment. 30. Inaccurate thermometer not to be used without fresh certificate: If an Inspector gives notice in writing that a thermometer is not accurate, it shall not, after one month from the date of such notice, be deemed to be accurate unless and until it has been re-examined as prescribed and a fresh certificate obtained which certificate shall be kept attached to the Humidity Register. 31. Hygrometer not to be affixed to wall etc. Unless protected by wood: (1) No hygrometer shall be affixed to a wall, pillar or other surface unless protected therefrom by wood or other non-conducting material at least 12 millimeters in thickness and distant at least 25 millimeters from the bulb of each thermometer. (2) No hygrometer shall be fixed at a height of more than 170 centimeters from the floor to the top of thermometer stem or in the direct draughts from a fan, window or ventilating opening. 32. No reading to be taken within 15 minutes of renewal of water: No reading shall be taken for record on any hygrometer within 15 minutes of renewal of water in the reservoir. 33. How to introduce steam for humidification: In any room in which steam pipes are used for the introduction of steam for the purpose of artificial humidification of the air, the following provisions shall apply:— (a) the diameter of such pipes shall not exceed 50 millimeters and in the case of pipes installed after the 1st day of January, 1979 the diameter shall not exceed 25 millimeters; (b) such pipes shall be as short as is reasonably practicable; (c) all hangers supporting such pipes shall be separated from the bare pipes by an efficient insulator not less than 12.5 mm in thickness; (d) no uncovered jet from such pipe shall project more than 11.5 cm beyond the outer surface of any cover; (e) the steam pressure shall be as low as practicable and shall not exceed 5 Kg/cm²; and (f) the pipe, employed for the introduction of steam into the air in a department, shall be effectively covered with such non-conducting material, as may be approved by the Inspector in order to minimise the amount of heat radiated by them into the department. [* Rule 34 Deleted] Rules 35 to 37prescribed under 35. Lighting of interior parts: (1) The general illumination over those interior Sub-section (4) of Section 17. parts of a factory where persons are regularly employed shall not be less than 65 lux measured in the horizontal plane at a level of 90 centimeters above the floor: provided that in any such parts in which the mounting height of the light source for general illumination necessarily exceeds 7.6 meters measured from the floor or where the structure of the room or the position or construction of the fixed machinery or plants prevents the uniform attainment of this standard, the general illumination at the said level shall be not less than 22 lux and where work is actually being done, the illumination shall be not less than 65 lux. (2) The illumination over all other interior parts of the factory over which persons employed pass shall, when and where a person is passing be not less than 5 lux at floor level. (3) The standard specified in this Rule shall be without prejudice to the provision of any additional illumination required to render the lighting sufficient and suitable for the nature of the work. 36. Prevention of glare: (1) Where any source of artificial light in the factory is less than 4.9 metres above the floor level, no part of the light source or of the lighting fitting having a brightness greater than 1.55 candles per square centimeter (4.87 lamborts) shall be visible to persons whilst normally employed within 30 metres of the source, except where the angle of elevation from eye to the source or part of the fitting as the case may be exceeds 20 degrees. (2) Any local light, that is to say, an artificial light designed to illuminate particularly the area or part of the area of work of a single operative or small group of operatives working near each other, shall be provided with a suitable shade of opaque material to prevent glare or with other effective means by which the light source is completely screened from the eyes of every person employed at a normal working place or shall be so placed that no such person is exposed to glare therefrom.
![Page 23: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/23.jpg)
23 37. Power of the Chief Inspector to exempt: Where the Chief Inspector is satisfied in respect of any particular factory or part thereof or in respect of any description of workroom or process that any requirement of Rules 35 and 36 is inappropriate or is not reasonably practicable, he may by an order in writing exempt the factory or part thereof, or description of workroom or process from such requirement to such extent and subject to such conditions as he may specify. [*Rule 38 deleted] Rules 39 to 44 prescribed under 39. Quantity of drinking water: The quantity of drinking water to be provided Sub-section (4) o Section 44 for the workers in every factory shall be at least 5 litres per worker employed in the factory and such drinking water shall be readily available at all times during working hours. 40. Source of supply: The water provided for drinking shall be supplied— (a) from a public water supply system; or (b) from any other source approved in writing by the Health Officer. 41. Means of supply: If drinking water is not supplied directly from taps either connected with public water supply system or any other water supply system of the factory approved by the Health Officer, it shall be kept in suitable vessels,receptacles or tanks fitted with taps and having dust-proof covers and placed on raised stands or platforms in shade and having suitable arrangement of drainage to carry away the spilt water. Such vessels, receptacles or tanks shall be kept clean and the water renewed at least once every day. All practicable measures shall be taken to ensure that the water is free from contamination. 42. Cleanliness of well or reservoir: (1) Drinking water shall not be supplied from any open well or reservoir unless it is so constructed, situated, protected and maintained as to be free from the possibility of pollution by chemical or bacterial and extraneous impurities (2) Where drinking water is supplied from such well or reservoir, the water in it shall be sterilised once a week or more frequently if the Inspector by written order so requires, and the date on which sterilising is carried out shall be recorded; Provided that this requirement shall not apply to any such well or reservoir if the water therein is filtered and treated to the satisfaction of the Health Officer before it is supplied for consumption. 43. Report from Health Officer: The Inspector may by order in writing direct the Manager to obtain, at such time or at such intervals as he may direct, a report from the Health Officer as to the fitness for human consumption of the water supplied to the workers, and in every case to submit to the inspector a copy of such report as soon as it is received from the Health officer. 44. Cooling of water: In every factory wherein more than 250 (two hundred and fifty) workers are ordinarily employed- (a) the drinking water supplied to the workers shall from the 15th April to the 15th September in every year, be cooled by ice or other effective methods; Provided that if ice is placed in the drinking water, the ice shall be clean and wholesome and shall be obtained only from a source approved in writing by the Health Officer; (b) the cooled drinking water shall be supplied in every canteen, lunch room and rest room and also at conveniently accessible points throughout the factory which for the purpose of these rules shall be called "water centres"; (c) the water centres shall be sheltered from the weather and adequately drained; (d) the number of water centres to be provided shall be one "entre" for every 150 persons employed at any one time in the factory; Provided that in the case of a factory where the number of persons employed exceeds 500, it shall be sufficient if there is one such centre as aforesaid for every 150 persons upto the first 500 and one for every 500 persons thereafter; Provided further that the distance between the place of work of any worker shall not be more than 50 metres from the nearest water centre or any distance as may be specified by the Inspector. (e) every water centre shall be maintained in a clean and orderly condition; and (f) the means of supply of cooled drinking water shall be either directly through taps connected to water coolers of any other system for cooling of water, or by means of vessels, receptacles or tanks fitted with taps and having dust-proof covers and placed on raised stands or platforms in shade and having suitable arrangement of drainage to carry away the spilt water. Such vessels, receptacles or tanks shall be kept clean and the water renewed at least once every day.
![Page 24: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/24.jpg)
24 Rules 45 to 54 45. Latrine accommodation: Latrine accommodation shall be provide in every factory in the Prscribed under folllowing scale:- Sub-section(3) (a) where females are employed, there shall be at least one latrine for every 25 females; Of Section 19 (b) Where males are employed, there shall be at leasat one latrine for every 25 males; Provided that where the number of male exceeds 100, it shall be sufficient if there is one latrine for every 25 males upto the first 100 and one for every 10 thereafter. In calculating the number of latrines required under this rule, any odd number of workers less than 25,or 50 as the case may be, shall be reckoned as 25 or 50. 46. Latrines to conform to public health requirements: Latrines, other than those connected with an efficient water borne sewage system, shall comply with the requirements of the Public Health Authorities. 47. Privacy of Latrines: Every latrine shall be under cover and so partitioned off as to secure privacy; and it shall have a proper door and fastenings. 48. Sign boards to be displayed: Where workers of both sexes are employed, there shall be displayed outside each latrine-block a notice "For Men Only" or "For Women Only" as the case may be in the language understood, by the majority of the workers. The notice shall also bear the figure of a man or a of woman as the case may be. 49.Urinal accommodation: Urinal accommodation shall be provided for the use of male workers and there shall be at least one urinal of not less than 60 centimeters in length for every 50 males; Provided that where the number of males employed exceeds 500, it shall be sufficient if there is one urinal for every 50 males upto the first 500 employed, ond one for every 100 thereafter. In calculating the urinal accommodation required under this rule any odd number of workers less than 50 or 100, as the case may be, shall be reckoned as 50 or 100. 50. Urinals to conform to public health reqirements: Urinals other than those connected with an efficient water-borne sewage system, and urinals in a factory wherein more than 250 (two hundred and fifty) workers are ordinarily employed shall comply with the requirements of the Public Health Authorities. 51. Certain latrines and urinals to be connected to sewarage system: When any general system of underground sewerage with an assured water supply for any particular locality is provided in municipality, all latrines and urinals of factory situated in such locality shall, if the factory is situated within 30 metres of an existing sewer, be connected with that sewerage system. 52. White washing, colour washing of latrines and urinals: The walls, ceilings and partitions of every latrine and urinal shall be white washed or colour washed and the white washing or colour washing shall be repeated at least once in every period of four months. The dates on which the white washing or colour washing is carried out shall be entered in the prescribed Register (Form 7); Provided that this rule shall not apply to latrines and urinals, walls, ceilings or partitions which are laid in glazed tiles or otherwise finished to provide a smooth, polished impervious surface and that they are washed with suitable detergents and disinfectants at least once in every period of four months 53. Construction and maintenance of drains: All drains carrying waste or sullage water shall be constructed in masonry or other impermeable material and shall be regularly flushed and the effluent disposed off by connecting such drains with a suitable drainage line; Provide that where there is no such drainage line,the effluent shall be deodorized and rendered innocuous and then disposed off in a suitable manner to the satisfaction of the Health Officer. 54. Water taps in latrine: (1) Where piped water supply is available, a sufficient number of water taps, conveniently accessible, shall be provided in or near such latrine accommodation. (2) If pipe water supply is not available, sufficient quantity of water shall be kept stored in suitable receptacles near the latrines. Rules 55 to 57 55. Number and location of spittoons: The number and location of spittoons to prescribed under be provided shall be to the satisfaction of the Inspector. Sub-section (2) of Section 20 56. Types of spittoons: The spittoons shall be of any of the following types— (a) a galvanized iron container with a conical funnelshaped cover. A layer of suitable disinfectant liquid shall always be maintained in the container; (b) a container filled with dry, clean sand and covered with a layer of bleaching powder, or
![Page 25: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/25.jpg)
25 (c) any other type approved by the Chief Inspector. 57. Cleaning of spittoons: The spittoon mentioned in clause (a) of Rule 56 shall be emptied, cleaned and disinfected at least once every day and the spittoon mentioned in clause (b) of Rule 56 shall be cleaned by scrapping out the top layer of sand as often as necessary or at least once every day. ____________________________________________________________________________________________ CHAPTER IV Safety Further precautions 58. Further safety precautions: Without prejudice to the provisions of Sub-section (1) of Prescribed under Section 21 in regard to the fencing of machines, the further precautions specified in the Sub-section(2) of Scedules annexed hereto shall apply to the machines noted in each Schedule. Section 21 SCHEDULE I Textile Machinery except Machinery used in Jute Mills 1. Application- The requirements of this schedule shall apply to machinery in factories engaged in the manufacture or processing of textiles other than jute textiles. The schedule would not apply to machinery in factories engaged exclusively in the manufacture of synthetic fibres. 2. Definitions- For the purpose of this schedule- (a) "Calendar" means a set of heavy rollers mounted on vertical side frames and arranged to pass cloth between them. Calendars may have two to ten rollers or bowls, some of which can be heated. (b) "Embossing calendar" means a calendar with two or more rolls, one of which is engraved for producing figure-effects of various kinds on a fabric. (c) "Card" means a machine consisting of cylinders of various sizes; and in certain cases flats —covered with card clothing and set in relation to each so that fibres in staple-form may be separated into individual relationship. The speed of the cylinders and their direction of rotation varies. The finished product is delivered as a sliver. Cards of different types are: the revolving flat card, the roller and clearer card etc. (d) "Card clothing" means the material with which the surface of the cylinder,deffer, flats etc. of a card are covered and consists of a thick foundation material made of, either textile fabrics through which are pressed many fine closely spaced, specially bent wires, or mounted saw toothed wire. (e) "Comber" means a machine for combing fibres of cotton, wool etc. The essential parts are device for feeding forward a fringe of fibres at regular intervals and an arrangement of combs or pins which , at the right time, pass through the fringe. All tangled fibres, short fibres and nips are removed and the long fibres are laid parallel. (f) "Combing machinery" means a general classification machinery including combers, sliver lap machines, ribbon lap machines and grill boxes, but excluding cards. (g) "Rotary staple cutter" means a machine consisting of one or more rotary blades used for the purpose of cutting textile fibres into staple lengths. (h) "Garnet machine" means any of a number of types of machine for opening hard twisted waste of wool, cotton, silk etc. Essentially, such machines consist of a licker-in; one or more cylinders, each having a competent worker and stripper rolls; and a fancy roll and a deffer. The action of this machine is some what like that of a wool card but it is much more severe in that the various rolls are covered with garnett wire instead of card clothing. (i) "Gill box" means a machine used in the worsted system of manufacturing yarns. Its function is to arrange fibres in parallel order. Essentially, it consists of a pair of feed rolls and a series of followers where the followers move at a faster surface speed and perform a combing action. (j) "In-running rolls" means any pair of rolls or drums between which there is a 'nip'. (k) "Interlocking arrangement" means a device that prevents the setting in motion of a dangerous part of a machine or the machine itself while the guard-cover or door provided to safeguard against danger is open or unlocked, and which will also hold the guard, cover or door closed and locked while the machine or the dangerous part is in motion. (l) "Kier" means a large metal vat, usually a pressure type, in which fabrics may be boiled out,bleached etc. (m) "Ribbon lapper" means a machine or a part of a machine used to prepare laps for feeding a cotton comb; its purpose is to provide a uniform lap in which the fibres have been straightened as much as possible. (n) "Sliver lapper" means a machine or a part of a machine in which a number of parallel card slivers are drafted slightly, laid side by side in a compact sheet and wound into a cylindrical package. (o) "Loom" means a machine for effecting the interlocking of two series of yarns crossing one another at right angles. The warp yarns are wound on a warp beam and pass through headles and reeds. The filling is shot across in a shuttle and settled in place by reeds and slay, and the fabric is wound on a cloth beam. (p) "Starch mangle" means a mangle that is used specifically for starching cotton goods. It commonly consists of two large rolls and a shallow open vat with several immersion rolls. The vat contains the starch solution.
![Page 26: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/26.jpg)
26 (q) "Water mangle" means a calendar having two or more rolls used for squeezing water from fabrics before drying. Water mangles also may be used in other ways during the finishing of various fabrics. (r) "Mule" means a type of spinning frame having a head stock and carriage as its two main sections. The head stock is stationary. The carriage is movable and it carries the spindles which draft and spin the roving into yarn. The carriage extends over the whole width of the machine and moves slowly towards and away from the head stock during the spining operation. (s) "Nip" is the danger zone between two rolls or drums which by virtue of their positioning and movement create a nipping hazard. (t) "Openers and pickers" means a general classification of machinery which includes breaker pickers,intermediate pickers, finisher pickers, single process pickers,multiple process pickers, willow machines, card and picker waste cleaners,thread extractors, shredding machines, roving waste openers, shoddy pickers,bale breakers,feeders, vertical openers, lattice cleaners, horizontal cleaners and any similar machinery equipped with either cylinders, screen section, calendar section, rolls or beaters used for the preparation of stock for further processing. (u) "Paddler" means a trough for a solution and, two or more squeeze rools between which cloth passes after being passed through a mordant or dye bath. (v) "Plaiting machine" means a machine used to lay cloth into folds of regular length for convenience of subsequent process or use. (w) "Roller printing machine" means a machine consisting of a large central cylynder, or pressure bowl, around the lower part of the perimeter of which is placed a series of engraved color rollers(each having a colour trough), furnisher roller, doctor blades etc.The machine is used for printing fabrics. (x) "Continuous bleaching range" means a machine for bleaching of cloth in rope or open-width form with the following arrangement; The cloth, after wetting out, pass through a squeeze roll into a saturator containing a solution of caustic soda and then to an enclosed J-Box. A V-shaped arrangement is attached to the front part of the J-Box for uniform and rapid saturation of the cloth, with steam before it is packed down in the J-Box. The cloth, in a single strand rope form, passes over a guide roll down the first arm of the 'V' and up the second. Steam is injected into the 'V' at the upper end of the second arm so that the cloth is rapidly saturated with steam at this point. The J-Box capacity is such that cloth will remain hot for a sufficient time to complete the scouring action. It then passes a series of washers with a squeeze roll in between. The cloth then passes through a second set of saturator, J-Box and washer, where it is treated with the peroxide solution. By slight modification of the form of the unit, the same process can be applied to open-width cloth. (y) "Mercerizing range" means a 3-bowl mangle, a tenter frame and a number of boxes for washing and scouring. The whole set up is in a straightline and all parts operate continuously. The combination is used to saturate the cloth with sodium hydroxide, stretch it while saturated and washing out most of the caustic before releasing tension. (z) "Sanforizing machine" means a machine consisting of large steam-heated cylinder and endless, thick woolen felt blanket which is in close contact with the cylinder for most of its perimeter, and electrically heated shoe which presses the cloth against the blanket while the latter is in a stretched condition as it curves around feed-in roll. (aa) "Shearing machine" means machine used for shearing cloth. Cutting action is provided by a number of steel blades spirally mounted on a roller. The roller rotates in close contact with a fixed ledger blade. There may be from one to six such rollers on a machine. (bb) "Singeing machine" means a machine which comprises of a heated roller, plate or an opened gas flame. The cloth or yarn is rapidly passed over the roller or the plate or through the open gas flame to remove fuzz or hairiness by burning. (cc) "Slasher" means a machine used for applying a size mixure to warp yarns. Essentially, it consists of a stand for holding section beams, a size box, one or more cylindrical dryers or an enclosed hot air dryer, and a beaming end for winding the yarn on the loom beams. (dd) "Tenter frame" means a machine for drying cloth under tension. It essentially consists of a pair of endless travelling chains fitted with clips of fine pins and carried on tracks. The cloth is firmly held at the salvages by the two chains which diverge as they move forward so that cloth is brought to the desired width. (ee) "Warper" means a machine for preparing and arranging the yarns intended for the warp of a fabric, specifically, a beam warper. 3. General safety requirements: (1) Every textile machine shall be provided with individual mechanical or electrical means for starting and stopping such machines. Belt shifter on machine driven by belts and shafting should be provided with a belt shifter lock of an equivalent positive locking device. (2) Stopping and starting handles or other controls shall be of such design and so positioned as to prevent the operator's hand or fingers from striking against any moving part of any other part of the machine. (3) All belts, pulleys, gears, chains, sprocket wheels and other dangerous moving parts of machinery which either form part of machinery or are used in association with it, shall be securely guarded.
![Page 27: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/27.jpg)
274. Openers and pickers: (1) In all opening or picker machinery, beaters and other dangerous parts shall be securely fenced by suitable guards so as to prevent contact with them. Such guards and doors or covers or openings giving access to any dangerous part of the machinery shall be provided with interlocking arrangement. Provided that in the case of doors or covers of openings giving access to any dangerous part, other than beater covers, instead of the interlocking arrangement, such openings may be so fenced by guards which prevent access to any such dangerous part and which is either kept positively locked in position or fixed in such a manner that it cannot be removed without the use of hand tools. (2) The feed rools on all opening and picking machinery shall be covered with a guard designed to prevent the operator from reaching the nip while the machinery is in operation. (3) The lap forming rollers shall be fitted with a guard or cover which shall prevent access to the nip at the intake of the lap roller and fluted roller as long as the weighted rack is down. The guard or cover shall be so locked that it cannot be raised until the machine is stopped, and the machine cannot be started until the cover or guard is closed. Provided that the foregoing provision shall not apply to the machine equipped with automatic lap forming devices. Provided further that any such machine equipped with an automatic lap forming device shall not be used unless the automatic lap forming device is in efficient working order. 5. Cotton cards: (1) All cylinder doors shall be secured by an interlocking arrangement which shall prevent the door being opened until the cylinder has ceased to revolve and shall render it imposible to restart the machine until the door has been closed. Provided that the latter requirement in respect of the automatic locking device shall not apply while stripping or grinding operations are carried out; Provided furter that stripping or grinding operations shall be carried out only by specially trained adult workers wearing tight fitting clothing whose names have been recorded in the Register prescribed in this behalf as required in Sub-section (1) of Section 22. (2) The licker-in shall be guarded so as to prevent access to the dangerous parts. (3) Every card shall be equipped with an arrangement that would enable the card cylinder to be driven by power during stripping/grinding operations without having to either shift the main belt to the fast pulley of the machine or to dismantle the interlocking mechanism. Such an arrangement shall be used only for stripping or grinding operations. 6. Garnett machines: (1) Garnett licker-in shall be enclosed. (2) Garnett fancy rolls shall be enclosed by guards. These shall be installed in a way that keeps worker rolls reasonably accessible for removal or adjustment. (3) The underside of the garnett shall be guarded by a screen mesh or other form of enclosures to prevent access. 7. Gill boxes: (1) The feed end shall be guarded so as to prevent fingers being caught in the pins of the intersecting rollers. (2) All nips of in-running rolls shall be guarded by suitable nip guards conforming to the following specifications:— Any opening which the guard may permit when fitted in position shall be so restricted with respect to the distance of the opening from any nip point through that opening and in any circumstances the maximum width of the opening shall not exceed the following:— Distance of opening from nip point Maximum width of opening 10 to 38 mm 6 mm 39 to 63 mm 10 mm 64 to 88 mm 13 mm 89 to 140 mm 15 mm 141 to 165 mm 19 mm 166 to 190 mm 22 mm 191 to 215 mm 32 mm 8. Silver and ribbon lappers (cotton): The calender drums and the lap spool shall be provided with a guard to prevent access to the nip between the in-running rolls. 9. Speed frames: Jack box wheels at the head stock shall be guarded and the guard shall have interlocking arrangement. 10. Spinning mules: Wheels on spinning mule carriages shall be provided with substantial wheel guards, extending to within 6 mm of the rails. 11. Warpers: Swivelled double-bar gates shall be installed on all warpers operating in excess of 410 metres/minute. These gates shall have interlocking arrangement, except for the purpose of inching or jogging; Provided that the top and bottom bars of the gate shall be at least 1.05 and 0.53 metres high from the floor or working platform, and the gate shall be located 38 mm from the vertical tangement to the beam head. 12. Slashers: (1) Cylinder dryers— (a) All open nips of in-running rolls shall be guarded by nip guards conforming to the requirements in paragraph 7.
![Page 28: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/28.jpg)
28 (b) When slushers are operated by control levers, these levers shall be connected to a horizontal bar or treadle located not more than 170 cm above the floor to control the operation from any point. (c) Slashes operated by push button control shall have stop and start buttons located at each end of the machine, and additional buttons located on both sides of the machine at the size box and the delivery end. If calender rolls are used, additional buttons shall be provided at both sides of the machine points near the nips except when slashers are equippedwith an enclosed dryer as in paragraph (b). (2) Enclosed hot air dryer: (a) All open nips of the top squeezing rollers shall be guarded by nip guards conforming to the requirement in paragraph 7 (2). (b) When slashers are operated by control levers, these levers shall be connected to a horizontal bar or treadle located not more than 170 mm above the floor to control the operation from any point. (c) Slashers operated by push-button control shall have stop and start buttons located at each end of the machine and additional stop and start buttons located on both sides of the machines at intervals spaced not more than 1.83 metres on centres. 13. Looms: (1) Each loom shall be equipped with suitable guards designed to minimise the danger from flying shuttles. (2) Beam weights for tension in beam shall be of such construction so as to prevent it from falling during its adjustment. 14. Valves of kiers, tanks and other containers: (1) Each valve controlling the flow of steam, injurious gases or liquids into a kier or any other tank or container into which a person is likely to enter in connection with a process,operation, maintenance or for any other purpose, shall be provided with a suitable locking arrangement to enable the said person to lock the valve securely in the closed position and retain the key with him before entering the kier, tank or container. (2) Wherever boiling tanks, caustic tanks and any other containers from which liquids which are hot, corrosive or toxic may overflow or splash, are so located that the operator cannot see the contents from the floor or working area, emergency shut off valves which can be controlled from a point not subject to danger of splash shall be provided to prevent danger. 15. Shearing machines: All revolving blades or shearing machines shall be guarded so that the opening between the cloth surface and the bottom of the guard will not exceed 10 mm. 16. Continuous bleaching range (cotton and rayon): The nip of all in-running rolls on open-width bleaching machine rolls shall be protected with a guard to prevent the worker from being caught at the nip. The guard shall extend across the entire length of the nip. 17. Mercerizing range (piece goods): (1) A stopping device shall be provided at each end of the machine. (2) Aguard shall be provided at each end of the frame between the in-running chain and the clip opener. (3) A nip guard shall be provided for the in-running rolls of the mangle and washers and the guard shall conform to the requirements in paragraph 7(2). 18. Tender frames: (1) A stopping device shall be provided at each end of the machine. (2) A guard shall be provided at each end of the machine frame at the in-running chain and clip opener. 19. Paddlers: Suitable nip guards conforming to the requirement in paragraph 7(2) shall be provided to all dangerous in-running rolls. 20. Centrifugal extractors: (1) Each extractor shall be provided with a guard with a basket, and the guard shall have interlocking arrangement. (2) Each extractor shall be equipped with a mechanically or electrically operated brake to quickly stop the basket when the power driving the basket is shut off. 21. Squeezer or wringer extractor,water mangle, starch mangle, back washer (worsted yarn) crabbing machines and decating machines: All in-running rolls shall be guarded with nip guards conforming to the requirements in paragraph 7(2). 22. Sanforizing and palmer machine: (1) Nip guards shall be provided on all accessible in-running rolls and these shall conform to the requirements in paragraph 7(2). (2) Access from the sides of the nips of in-running rolls should be fenced by suitable side guards. (3) A safety trip rod, cable or wire centre cord shall be provided across the front and back of all palmer cylinders extending the length of the face of the cylinder. It shall operate readily whether pushed or pulled. The safety trip shall not be more than 170 cm above the level at which the operator stands and shall be readily accessible. 23. Rope washers: (1) Splash guards shall be installed on all rope washers unless the machine is so designed as to prevent the water or liquid from splashing the operator, the floor or the working surface. (2) A safety trip rod, cable or wire centre cord shall be provided acrooss the front and back of all rope washers extending the length of the face of the washer. It shall operate readily whether pushed or pulled.this safety trip shall be not more than 170 cm above the level on which the operator stands and shall be readily accessible. 24. Laundry washer tumbler or shaker: (1) Each drying tumbler, each double cylinder shaker or clothes tumbler and each washing machine shall be equipped with an interlocking arrangement which will prevent the power operation of the inside cylinder when the outer door on the case or shell is open and which will prevent the outer
![Page 29: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/29.jpg)
29door on the case or shell from being opened without shutting off the power and the cylinder coming to a stop. This should not prevent the movement of the inner cylinder by means of a hand operated mechanism or on an inching device. (2) Each closed barrel shall also be equipped with adequate means for holding open the doors or covers of the inner and outer cylinders or shells while it is being loaded or unloaded. 25. Printing machine (roller type): (1) All in-running rolls shall be guarded by nip guards conforming to the requirement in paragraph 7(2). (2) The engraved roller gears and the large crown wheel shall be guarded. 26. Calenders: The nip at the in-running side of the rolls shall be provided with a guard extending across the entire length of the nip and arranged to prevent the fingers of the workers from being pulled in between the rolls, or between the guard and the rolls, and so constructed that the cloth can be fed into the rolls safely. 27. Rotary staple cutters: The cutter shall be protected by a guard to prevent the hands reaching the cutting zone. 28. Plaiting machines: Access to the trap between the knife and card bar shall be prevented by a guard. 29. Hand bailing machine: An angle iron handle stop guard shall be installed at right angle to the frame of the machine. The stop guard shall be so designed and so located that it will prevent the hand from travelling beyond the vertical position should the handle slip from the operator's hand when the pawl has been released from the teeth of the take up-gear. 30. Flat-work ironer: Each flat-work or collar ironer shall be equipped with a safety bar or other guard across the entire front of the feed or first pressure rolls, so arranged that the striking of the bar and guard by hand of the operator or other person will stop the machine. The guard shall be such that the operator or other person cannot reach into the rolls without removing the guard. This may be either a vertical guard in all sides or a complete cover. If a vertical guard is used, the distance from the floor or working platform to the top of guard shall be not less than 1.83 metres. _____________________________________________________________________________________________ SCHEDULE II Cotton Ginning Line Shaft: The line shaft of second motion in cotton ginning factories when below floor level, shall be completely enclosed by a continuous wall or unclimbable fencing with only so many openings as are necessary for access to the shaft for removing cotton seed, cleaning and oiling; and such openings shall be provided with gates or doors which shall be kept closed and locked. SCHEDULE III Woodworking Machinery 1. Definitions: For the purpose of this schedule- (a) "Woodworking machine" means a circular saw, band saw, planing machine,chain mortising machine or vertical spindle moulding machine operating on wood or cork. (b) "Circular saw" means a circular saw working in a bench (including a rack bench), but does not include a pendulum or similar saw which is moved towards the wood for the purpose of cutting operation. (c) "Band saw" means a band saw, the cutting portion of which runs in a vertical direction but does not include a log saw or band re-sawing machine; and (d) "Planing machine" means a machine for overhand planing or for thicknessing or for both operations. 2. Stopping and starting device: An efficient stopping and starting device shall be provided on every woodworking machine. The control of this device shall be in such a position as to be readily and conveniently operated by the person in charge of the machine. 3. Space around machines: The space surrounding every woodworking machine in motion shall be kept free from obstruction. 4. Floors: The floor surrounding every woodworking machine shall be maintained in good and level condition, and shall not be allowed to become slippery, and as far as practicable shall be kept free from chips or other loose material. 5. Training and supervision: (1) No person shall be employed at a woodworking machine unless he has been sufficiently trained to work that class of machine, or unless he works under the adequate supervision of a person who has a thorough knowledge of the working of the machine. (2) A person who is being trained to work a woodworking machine shall be fully and carefully instructed as to the dangers of the machine and the precautions to be observed to secure safe working of the machine. 6. Circular saw: Every circular saw shall be fenced as follows:— (a) behind and in direct line with the saw there shall be a riving knife, which shall have a smooth surface, shall be strong, rigid and easily adjustable and shall also conform to the following conditions:—
![Page 30: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/30.jpg)
30 (i) the edge of the knife nearer the saw shall form an arc of a circle having a radius not exceeding the radius of the largest saw used on the bench; (ii) the knife shall be maintained as close as practicable to the saw, having regard to the nature of the work being done at the time, and at the level of the bench table the distance between the front edge of the knife and the teeth of the saw shall not exceed 12 mm; and (iii) for a saw of a diameter of not less than 60 cm, the knife shall extend upwards from the bench table to within 25 mm of the top of the saw, and for a saw of a diameter 60 cm or over shall extend upwards from the bench table to a height of at least 23 cm. (b) the top of the saw shall be covered by a strong and easily adjustable guard, with a flange at the side of the saw farthest from the fence. The guard shall be kept so adjusted that the said flange shall extend below the roots of the teeth of the saw. The guard shall extend from the top of the riving knife to a point as low as practicable at the cutting edge of the saw ; and (c) the part of the saw below the bench table shall be protected by two plates of metal or other suitable material, one on each side of the saw; such plates shall not be more than 15 cm apart, and shall extend from the axis of the saw outwards to a distance of not less than 5 cm beyond the teeth of the saw. Metal plates, if not beaded, shall be of a thickness of at least 2.5 mm or, if beaded, be of a thickness of at least 1.25 mm. 7. Push sticks: A push stick or other suitable appliance shall be provided for use at every circular saw and at every vertical spindle moulding machine to enable the work to be done without unnecessary risk. 8. Band saws: Every band saw shall be guarded as follows: (a) both sides of the botttom pulley shall be completely encased by sheet or expanded metal or other suitable material; (b) the front of the top pulley shall be covered with sheet or expanded metal or other suitable material; and (c) all portions of the blade shall be enclosed or otherwise securely guarded, except the portion of the blade between the bench table and the top guide. 9. Planing machine: (1) A planing machine (other than a planing machine which is mechanically fed) shall not be used for over hand planing unless it is fitted with a cylindrical cutter block. (2) Every planing machine used for overhand planing shall be provided with a “bridge” guard capable of covering the full length and breadth of the cutting slot in the bench, and so constructed as to be easily adjusted both in vertical and horizontal direction. (3) The feed roller of every planing machine used for thicknessing except the combined machine for overhand planing and thicknessing, shall be provided with an efficient guard. 10. Vertical spindle moulding machine: (1) The cutter of every vertical spindle moulding machine shall be guarded by the most efficient guard having regards to the nature of the work being performed. (2) The wood being moulded at a vertical spindle moulding machine shall, if practicable, be held in a jig or holder of such construction as to reduce as far as possible the risk of accident to the worker. 11. Chain mortising machine: The chain of every chain mortising machine shall be provided with a guard which shall enclose the cutters as far as practicable. 12. Adjustment and maintenance of guards: The guards and other appliances required under this schedule shall be— (a) maintained in an efficient state; (b) constantly kept in position while the machinery is in motion;and (c) so adjusted as to enable the work to be done without unnecessary risk. 13. Exemptions: Paragraphs 6, 8, 9 and 10 shall not apply to any woodworking machine in respect of which it can be proved that other safeguards are provided, maintained and used which render the machine as safe as it would be if, guarded in the manner prescribed in this schedule. SCHEDULE IV Rubber mills 1. Installation of machines: Mills for breaking down cracking, grating,mixing, refining and warming rubber compound shall be so installed that the top of the front roll is not less than 105 centimetres above the floor or working level; Provided that in existing installations where the top of the front roll is below this height, a strong, rigid distance bar guard shall be fitted across the front of the machine in such position that the operator cannot reach the nip of the rolls. 2. Safety devices: (1) Rubber Mills shall be equipped with— (a) hoppers so constructed or guarded that it is impossible for the operators to come in contact in any manner with the tip of the rolls; or (b) horizontal safety-trip rods or tight wire cables across both front and rears, which will, when pushed or pulled, operate instantly to disconnect the power and apply the brakes, or to reverse the rolls.
![Page 31: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/31.jpg)
31 (2) Safety-trip rods or tight wire cables on rubber mill shall extend across the entire length of the face of the rolls and shall be located not more than 175 cm above the floor or working level. (3) Safety-trip rods and tight wire cables on all rubber mills shall be examined and tested daily in the presence of the Manager or other responsible person and if any defect is disclosed by such examination and test, the mill shall not be used until such defect has been remedied. SCHEDULE V Centrifugal Machines 1. Definition: "Centrifugal machines" include centrifugal extractors, separators and driers. 2. Design, construction, maintenance etc: Every part of centrifugal machine shall be— (a) of good design and construction and of adequate strength; (b) properly maintained; and (c) examined thoroughly by a competent person at regular intervals. 3. Inter-locking guard for drum or basket: (1) The cage housing the rotating drum or basket of every centrifugal machine shall be provided with a strong lid. The design and construction of the cage as well as of the lid shall be such that no access is possible to the drum and basket when the lid is closed. (2) Every centrifugal machine shall be provided with an efficient inter-locking device that will effectively prevent the lid referred to in sub-paragraph (1) from being opened while the drum or basket is in motion and prevent or basket from being set in motion while the lid is in the open position. 4. Braking arrangement: Every centrifugal machine shall be provided with an effective braking arrangement capable of bringing the drum or basket to rest within as short a period of time as reasonably practicable after the power is cut off. 5. Operating speed: No centrifugal machine shall be operated at a speed in excess of the manufacturer's rating which shall be legibly stamped at easily visible places both on the inside of the basket and on the outside of the machine casing. 6. Exceptions: Sub-paragraph (2) of paragraph 3, paragraph 4 and 5 shall not apply in case of top lung machines or similar machines used in the sugar manufacturing industry. ____________________________________________________________________________________________ SCHEDULE VI Power press 1. Application: The scedule shall apply to all types of power presses including press brakes, except when used for working hot metal. 2. Definition: For the purpose of this schedule— (a) "approved" means approved by the Chief Inspector; (b) "fixed fencing" means fencing provided for the tools of a power press being fencing which has no moving part associated with or dependent upon the mechanism of a power press and includes that part of a closed tool which acts as a guard; (c) "power press" means a machine used in metal or other industries for moulding, pressing, blanking, raising, drawing and similar purposes; (d) "Safety device" means the fencing and any other safeguard provided for the tools of a power press. 3. Starting and stopping mechanism: The starting and stopping mechanism shall be provided with safety stop so as to prevent over running of the press or descent of the ram during tool setting etc. 4. Protection of tool and die: (1) Each press shall be provided with a fixed guard with a slip plate on the under side enclosing the front and all sides of the tool. (2) Each die shall be provide with a fixed guard surrounding its front and sides, and extending to the back in the form of a tunnel through which the pressed article falls to the rear of the press. (3) The design, construction and mutual position of the guard referred to in (1) and (2) shall be such as to preclude the possibility of the worker's hand or fingers reaching the dangerous zone. (4) The machine shall be fed through a small aperture at the bottom of the die guard, but a wider aperture may be permitted for second or subsequent operations if feeding is done through a chute. (5) Notwithstanding anything contained in sub-clause(1) and (2), an automatic or inter-locked guard may be used in place of a fixed guard, but where such guards are used they shall be maintained in an efficient working condition and if any guard develops a defect, the power press shall not be operated unless the defect of the guard is removed. 5. Appointment of persons to prepare power presses for use: (1) Except as provided in sub-paragraph(4) no person shall set, reset, adjust or try out the tools on a power press or install or adjust any safety device thereon, being installation or adjustment preparatory to production of die proving, or carry out an inspection and test of any safety device thereon required by paragraph 8 unless he—
![Page 32: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/32.jpg)
32 (a) has attained the age of eighteen; (b) has been trained in accordance with the sub-paragraph 2) and has been appointed by the occupier of the factory to carry out those duties in respect of the class or description of power press or the class or description of safety device to which the power press or the safety device(as the case may be) belongs; and the name of every such person shall be entered in a Register in Form 9. (2) The training shall include suitable and sufficient practical instruction in the matters in relation to each type of power press and safety device in respect of which it is proposed to appoint the person being trained. 6. Examination and testing of power presses and safety devices: (1) No power press or safety device shall be taken into use in any factory for the first time in that factory,or incase of a safety device for the first time on any power press, unless it has been thoroughly examined and tested, in the case of a power press after installation in the factory, or in the case of a safety device, when in position on the power press in connection with which it is to be used. (2) No power press shall be used unless it has been thoroughly examined and tested by a competent person within the immediately preceding period of twelve months. (3) No power press shall be used unless every safety device (other than fixed fencing) thereon has within the immediately preceding period of six months when in position on that power press, been thoroughly examined and tested by a competent person. (4) The competent person carrying out an examination and test under the foregoing provisions shall make a report of the examination and test containing the following particulars and every such report shall be kept readily available for inspection:— (a) Name of the occupier of the factory: (b) Address of the factory: (c) Identification number or mark sufficient to identify the power press or the safety device: (d) Date on which the power press or the safety device was first taken into use in the factory: (e) The date of each periodical thorough examination carried out as per the requirement of sub-paragraph (2) above: (f) Particulars of any defect effecting the safety working of the power press or the safety device found at any such thorough examination and steps taken to remedy such defects. 7. Defects disclosed during a thorough examination and test: (1) Where any defect is disclosed in any power press or in any safety device by any examination and test under paragraph 6 and in the opinion of the competent person carrying out the examination and test either— (a) the said defect is a cause of danger to workers and in consequence the power press or safety device (as the case may be) ought not to be used until the said defect has been remedied; or (b) the said defect may become a cause of danger to workers and in consequence the power press or safety device (as the case may be) ought not to be used after the expiration of a specified period unless the said defect has been has been remedied, such defect shall, as soon as possible after the completion of the examination and test, be notified in writing by the competent person to the occupier of the factory and, in the case of a defect falling within clause (b) of this sub-paragraph such notification shall include the period within which, in the opinion of the competent person, the defect ought to be remedied. (2) In every case where notification has been given under this paragraph a copy of the reports made under paragraph 6(4) shall be sent by the competent person to the Inspector for the area within fourteen days of the completion of the examination and test. (3) Where any such defect is notified to the occupier in accordance with the foregoing provisions of this paragraph the power press or safety device (as the case may be) having the said defect shall not be used— (a) in the case of a defect falling within clause (a) of sub-paragraph (1), until the said defect has been remedied; and (b) in the case of a defect falling within clause (b) of sub-paragraph (1) has after the expiration of the said defect has been remedied. (4) As soon as is practicable after any defect of which notification has been given under sub-paragraph (1) has been remedied, a record shall be made by or on behalf of the occupier stating the measures by which and the date on which the defect was remedied. 8. Inspection and test of safety devices: (1) No power press shall be used after the setting, resetting or adjustment of the tools thereon unless a person appointed or authorised for the purpose under paragraph 5 has inspected and tested every safety device thereon while it is in position on the said power press; Provided that an inspection,test and certificate as aforesaid shall not be required where any adjustment of the tools has not caused or resulted in any alteration to or disturbance of any safety device on the power press and if after the adjustment of the tools, the safety devices remain, in the opinion of such a person as aforesaid, in efficient working order. (2) Every power press and every safety device thereon while it is in position on the said power press shall be inspected and tested by a trained person every day.
![Page 33: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/33.jpg)
339. Defects disclosed during an inspection and test: (1) Where it appears to any person as a result of any inspection and test carried out by him under paragraph 8 that any necessary safety device is not in position or is not properly in position on power press or that any safety device which is in position on a power press is not in his opinion suitable, he shall notify the Manager forthwith. (2) Except as provided in sub-paragraph (3) where any defect is disclosed in a safety device by any inspection and test under paragraph 8, the person carrying out the inspection and test shall notify the Manager forthwith. (3) Where any defect in a safety device is the subject of a notification in writing under paragraph 7 by virtue of which the use of the safety device may be continued during a specified period without the said defect having been remedied, the requirement in sub-paragraph (2) of this paragraph shall not apply to the said defect until the said period has expired. 10. Identification of power presses and safety devices: For the purpose of identification every power press and every safety device provided for the same shall be distinctively and plainly marked. 11. Training and instructions to operators: The operators shall be trained and instructed in the safe method of work on any power press. 12. Exemptions: (1) If in respect of any factory the Chief Inspector is satisfied that owing to the circumstances or infrequency of the processes or for any other reason, all or any of the provisions of this schedule are not necessary for the protection of the workers employed on any power press or in any class or description of power press or in the factory, the Chief Insoector may, by a certificate in writing (Which he may in his discretion revoke at any time), exempt such factory from all or any of such provisions subject to such conditions, if any, as he may specify therein. (2) Where such exemption is granted, a legible copy of the certificate, showing the conditions( if any) subject to which it has been granted, shall be kept posted in the factory in a position where it may be conveniently read by the persons employed. SCHEDULE VII Shears,Slitters and Guillotine Machines 1. Definition: For the purpose of this schedule— (a) "Guillotin" means a machine ordinarily equipped with straight level-edged blade operating vertically against a stationery resisting edge and used for cutting metallic or non-metallic substances; (b) "Shears" or "Shearing machine" means a machine ordinarily equipped with straight, level-edged blades operating vertically against the resisting edges, or with rotary, overlapping cutting wheels, and used for shearing metals or non-metallic substances; (c) "Slitter" or "Slitting machine" means a machine ordinarily equipped with circular dice-type knives, and used for trimming or cutting into metal or non-metallic substances or for slitting them into narrow strips; for the purpose of this Schedule this term includes bread or other food slicers equipped with rotary knives or cutting discs. 2. Guillotines and shears: (1) Where practicable, a barrier metal guard of adequate strength shall be provided at the front of the knife, fastened to the machine frame and shall be so fixed as would prevent any part of the operator's body to reach the descending blade from above, below or through the barrier guard or from the sides; Provided that in case of machines used in the paper printing and allied industries, where a fixed barrier metal guard is not suitable on account of the height and volume of the material being fed, there shall be provided suitable starting devices which require simultaneous action of both the hands of the operator or an automatic device which will move both the hands of the operator from the danger zone at every descent of the blade. (2) At the back end of such machines, an inclined guard shall be provided over which the slit pieces would slide and be collected at a safe distance in a manner as would prevent a person at the back from reaching the descending blade. (3) Power-driven guillotin cutters, except continuous feed trimmers, shall be equipped with:— (a) starting devices which require the simultaneous action of both hands to start the cutting motion and of at least one hand on a control during the complete stroke of the knife; or (b) an automatic guard which will remove the hands of the operator from the danger zone at every descent of the blade, used inconjunction with one-hand starting devices which require two distinct movements of the device to start the cutting motion, and so designed so as to return positively to the non-starting position after each complete cycle of the knife. (4) Where two or more workers are employed at the same time on the same power-driven guillotine cutter equipped with two hand control, the device shall be so arranged that each worker shall be required to use both hands simultaneously on the safety trip to start the cutting motion and at least one hand on a control to complete the cut. (5) Power-driven guillotine cutters, other than continuous trimmers, shall be provided, in addition to the brake or other stopping mechanism, with an emergency device which will prevent the machine from operating in the event of failure of the brake when the starting mechanism is in the non-starting position. 3. Slitting Machines: (1) Circular disc-type knives on machines for cutting metal and leather, paper, rubber, textiles or other non-metallic substances shall, if within reach of operators standing on the floor or working level, be
![Page 34: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/34.jpg)
34provided with guards enclosing the knife edges at all times as near as practicable to the surface of the material, and which may either— (a) automatically adjust themselves to the thickness of the material; or (b) be fixed or manually adjusted so that the space between the bottom of the guard and the material will not exceed 6 mm(1/2 in) at any time. (2) portions of blades underneath the table or benches of slitting machines shall be covered by guards. 4. Index cutters and Vertical Paper Slitters: Index cutters and other machines for cutting strips from the end of books, and for similar operations, shall be provided with fixed guards so arranged that the fingers of the operators cannot come between the blades and the tables. 5.Corner Cutters: Corner Cutters, used in the manufacture of paper boxes, shall be equipped with:— (a) suitable guard, fastened to the machines in front of the knives and provided with slots or perforations to afford visibility of the operations; or (b) other guard equally efficient for the protection of the fingers of the workers. 6. Band Knives: Band wheels or band knives, and all portions of the blades except the working side between the sliding guide and the table on the vertical machines or between the wheel guards on horizontal machines, shall be completely enclosed with hinged guards of sheet metal not less than 1 mm (0.04in.) in thickness or of other mareial of equal strength.
____________________________________________________________________________________________
Register prescribed 59. Register of workers employed for work on or near machinery in motion : In under Sub-section(1) every factory a Register shall be maintained in Form 9 in which the name and othe r of Section22 particulars of every such worker as may be employed for such examination or operation as referred to in the provisio to Sub-section (1) of Section 21 shall be entered. Rule prescribed 60. Employment of Young Persons on dangerous machines: The machines specified in under Sub-section(2) Section 28, 29 and 30 and the machines mentioned below shall be deemed to be of such Of Section 23 dangerous character that Young Persons shall not work at them unless the provisions of Sub-section(1) of Section 23 are complied with:— (a)Power press other than Hydraulic Presses (b) Milling Machines used in metal trades (c) Circular Saws. (d)Platen Printing Machines. (e) Guillotine Machines. Rule framed under 61. Hoists and Lifts: (1) A Register shall be maintained to record particulars of examination Section 28. of hoists and lifts and shall give particulars as shown in Form 10. (2) In pursuance of the provisions of Sub-section (4) of Section 28, in respect of any class or description of hoist or lift specified in the first column of the following Schedule, the requirements of Section 28 specified in the second column of the said Schedule and set opposite to that class or description of hoist or lift shall not apply. SCHEDULE Class or description of Hoist or lift Requirement which shall not apply (1) (2) Hoists or lifts mainly used for raising — Sub-section 1(b) in so far as it requires a gate at the bottom landing; materials for charging blast furnaces Sub-section 1(d); Sub-section 1(e) or lime kilns. Hoist not connected with mechanical — Sub-section 1(b) in so far as it requires the hoistway or liftway power and which are not used for enclosure to be so constructed so as to prevent any person or thing carrying persons. from being trapped between any part of the hoist or lift and any
fixed structure or moving part; Sub-section 1(e). _____________________________________________________________________________________________ Rule prescribed 62. Lifting machines,chains, ropes and lifting tackles: (1) No lifting macchine and no Under Sub-section(2) chain, rope or lifting tackle except a fibre rope or fibre rope sling shall be taken into use Section 29 in any factory for the first time in that factory unless it has been tested and all parts have been thoroughly examined by a competent person and a certificate of such a test and examination specifying the safe working load or loads and signed by the person making the test and examination, has been obtained and is kept available for inspection. (2) Every jib-crane so constructed that the safe working load may be varied by the raising or lowering of the jib, shall have attached thereto either an automatic indicator of safe working loads or an automatic jib angle indicator
![Page 35: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/35.jpg)
35and a table indicating the safe working loads at corresponding inclinations of the jib or corresponding radii of the load. (3) A table showing the safe working load of every kind and size of chain, rope or lifting tackle in use, and, in the case of a multiple sling, the safe working loads at different angles of the legs, shall be posted in the store in which the chains, ropes or lifting tackles are kept, and in prominent positions on the premises, and no chain, rope or lifting tackle not shown in the table shall be used; Provided that this Sub-rule shall not apply in respect of such lifting tackle if the safe working load thereof, or in the case of a multiple sling, the safe working load at different angles of the legs, is plainly marked upon it. (4) The Register to be maintained under clause (a) (iii) of Sub-section (1) of Section 29 of the Act shall contain the following particulars and shall be kept readily available for inspection:— (a) Name of Occupier of the factory: (b) Address of the factory: (c) Distinguishing number or mark, if any, and description suficient to identify the lifting machine , chain, rope or the lifting tackle. (d) Date when the lifting machine, chain, rope or lifting tackle was first taken into use in the factory: (e) Date and number of the certificate relating to any test and examination made under Sub-Rules(1) and (9) together with the name and address of the person who issued the certificate. (f) Date of each periodical thorough examination made under clause(a)(iii) of Sub-section(1) of Section 29 of the Act and Sub-rule(8) and by whom it was carried out: (g) Date of annealing or other heat treatment of the chain or other lifting tackle made under Sub-rule(7) and by whom it was carried out: (h) Particulars of any defects affecting the safe working load found at any such thorough examination or after annealing and of the steps taken to remedy such defects: (5) All rails on which a travelling crane moves and every track on which the carriage of a transporter or runway moves shall be of proper size and adequate strength and have an even running surface, and every such rail or track shall be properly laid, adequately supported and properly maintained. (6) To provide access to rail tracks of overhead travelling cranes suitable passage-ways of at least 50 centimeters width with toe boards and double hand rails 90cm high shall be provided alongside, and clear of, the rail tracks of overhead travelling cranes, such that no moving part of the crane can strike persons on the ways, and the passage-way shall be at a lower level than the crane track itself. Safe access ladders shall be provided at suitable intervals to afford access to these passage-ways, and from passage-ways to the rail tracks; Provided that the Chief Inspector may, for reasons to be specified in writing, exempt any factory in respect of any overhead travelling crane from the operation of any provision of this Sub-rule subject to such conditions as he may specify. (7) Allchains and lifting tackles except a rope sling shall, unless they have been subjected to such other heat treatment as may be approved by the Chief Inspector Of Factories, be effectively annealed under the supervision of a competent person at the following intervals:— (a) all chains, slings, rings, hooks, shackles and swivels used in connection with molten metal or molten slag or when they are made of 12.5 mm bar or smaller, once at least in every six months; (b) all other chains, rings, hooks, shackles and swivels in general use, once at least in every twelve months; Provided that chains and lifting tackles not in frequent use shall, subject to the Chief Inspector's approval, be annealed only when necessary. Particular of such annealing shall be entered in a Register prescribed under Sub-rule(4). (8) Nothing in the foregoing Sub-rule(7) shall apply to the following classes of chains and lifting tackles:— (a) chains made of malleable cast iron; (b) plate link chains; (c) chains, rings,hooks, shackles and swivels made of steel or of any non-ferrous metal; (d) pitched chains, working on sprocket or pocketed wheels; (e) rings, hooks,shackles and swivels permanently attached to pitched chains, pulley blocks or weighing machines; (f) hooks and swivels having screw threaded parts or ball bearing or other case hardened parts; (g) socket shackles secured to wire ropes by white metal capping; (h) bordeaux connections; Provided that such chains and lifting tackles shall be thoroughly examined by a competent person once at least in every twelve months, and particulars entered in the Register kept in accordance with Sub-rule (4). (9) All lifting machines, ropes,chains and lifting tackles, except a fibre rope or fibre sling, which have been lengthened, altered or repaired by welding or otherwise, shall, before being again taken into use, be adequately re-tested and re-examined by a competent person and certificate of such test and examination be obtained, and particulars entered in the Register kept in accordance with Sub-rule (4).
![Page 36: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/36.jpg)
36 (10) No person under 18 years of age and no person who is not sufficiently competent and reliable shall be employed as driver of a lifting machine whether driven by mechanical power or otherwise, or to give signals to a driver. (11) Where the Chief Inspector of Factories is satisfied that in a factory due to shut down or for any other reasons it is not practicable to maintain a minimum distance of 6 metres between the person employed or working on or near the wheel track of a travelling crane and the crane, he may on the request of the Manager reduce the distance to such extent as he may consider necessary and also prescribe further precautions indicating appointment of suitable number of supervisors to ensure the safety of the persons while they are employed or working on or near the track. Rules 63 and 64 prescribed 63. Pressure vessels or plant: (1) In this rule:— Under Sus-Sections (2) and (a) "Design pressure" means the maximum pressure that a pressure vessel or plant (3) of Section 31 is designed to withstand safely when operating normally; (b) "Maximum permissible working pressure" means the maximum pressure at which a pressure vessel or plant is permitted to be operated or used under this rule and is determined by the technical requirements of the process; (c) "Plant" means a system of piping that is connected to a pressure vessel and is used to contain a gas, vapour or liquid under pressure greater than the atmospheric pressure, and includes the pressure vessel; (d) "Pressure vessel" means a vessel that may be used for containing, storing, distributing, transferring, distilling, proessing or otherwise handling any gas, vapour or liquid under pressure greater than the atmospheric pressure and includes any pipeline fitting or other equipment attached thereto or used in connection therewith; and (e) "Competent person" means a person whois, in the opinion of the Chief Inspector, capable by virtue of his qualifications, training and experience, of conducting a thorough examination and pressure test, as required, on a pressure vessel or plant, and of making a full report on its condition. (2) Exceptions: Nothing in this rule shall apply to:— (a) vessels made of ferrous materials having an internal operating pressure not exceeding 1Kg/cm²; (b) steam boilers, steam and feed pipes and their fittings coming under the purview of the Indian Boilers Act,1923. (c) metal bottles or cylinders used for storage or transport of compressed gases or liquified or dissolved gases under pressure covered by the Gas Cylinder Rules,1940 framed under the Indian Explosive Act,1884; (d) vessels in which internal pressure is due solely to the static head of liquid; (e) vessels with a nominal water capacity not exceeding 500 litres connected in a water-pumping system containing air that is compressed to serve as a cushion; (f) vessels for nuclear energy application; (g) refrigeration plant having a capacity of 3 tons or less of refrigeration in 24 hours; and (h) working cylinders of steam engines or prime movers, feed pumps and steam traps, turbine casing, compressor cylinder, steam separators or driers,steam strainers, steam de-superheaters, oil separators,air receivers for firesprinkler installations; air receivers of monotype machines, provided the maximum working pressure of the air receiver does not exceed 1.33 Kg/cm² and the capacity 85 Litres; air receivers of electrical circuit breakers; air receivers of electrical relays; air vessels on pumps; pipe coils, accessories of instruments and appliances such as cylinders and piston assemblies used for operating relays and interlocking type of guards; vessels with liquids subjected to static head only; and hydraulically operated cylinders other than any cylinder communicating with an air loaded accumulator. (3) Design and construction: Every pressure vessel or plant used in a factory— (a) shall be properly designed on sound engineering practice; (b) shall be of good construction, sound material, adequate strength and free from any patent defects; and (c) shall be properly maintained in a safe condition; Provided that the pressure vessel or plant in respect of the design and construction of which there is an Indian Standard or a Standard of the country of manufacture or any other Law or Regulation in force, shall be designed and constructed in accordance with the said Standard, Law or Regulation, as the case may be, and a certificate thereof shall be obtained from the manufacturer or from the competent person which shall be kept and produced on demand by an Inspector. (4) Safety devices: Every pressure vessel shall be fitted with— (a) a suitable safety valve or other effective pressure relieving device of adequate capacity to ensure that the maximum permissible working pressure of the pressure vessel shall not be exceeded. It shall be set to operate at a pressure not exceeding the maximum permissible working pressure and when more than one protective device is provided, only one of the devices need be set to operate at the maximum permissible working pressure and the additional device shall be set to discharge at a pressure not more than 5 percent in excess of the maximum permissible working pressure;
![Page 37: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/37.jpg)
37 (b) a suitable pressure gauge with a dial range not less than 1.5 times the maximum permissible working pressure, easily visible and designed to show at all times the correct internal pressure and marked with a prominent red mark at the maximum permissible working pressure of the pressure vessel; (c) a suitable nipple and glove valve connected for the exclusive purpose of attaching a test pressure gauge for checking the accuracy of the pressure gauge referred to in clause (b) of this sub-rule; (d) a suitable stop valve or valves by which the pressure vessel may be isolated from other pressure vessels or plant or source of supply of pressure. Such a stop valve or valves shall be located as close to the pressure vessel as possible and shall be easily accessible; and (e) a suitable drain cock or valve at the lowest part of the pressure vessel for the discharge of the liquid or other substances that may collect in the pressure vessel; Provided that it shall be sufficient for the purpose of this sub-rule if the safety valve or pressure relieving device, the pressure gauge and the stop valve are mounted on a pipe line immediately adjacent to the pressure vessel and where there is a range of two or more similar pressure vessels served by the same pressure lead, only one set of such mountings need be fitted on the pressure lead immediately adjacent to the range of pressure vessels, provided they cannot be isolated. (5) Pressure reducing devices: (a) Every pressure vessel which is designed for a working pressure less than the pressure at the source of supply, or less than the pressure which can be obtained in the pipe connecting the pressure vessel with any other source of supply, shall be fitted with a suitable pressure reducing valve or other suitable automatic device to prevent the maximum permissible working pressure of the pressure vessel being exceeded. (b) To further protect the pressure vessel in the event of failure of the reducing valve or device, at least one safety valve having a capacity sufficient to release all the steam, vapour or gas without uindue pressure rise as determined by the pressure at the source of supply, and the size of the pipe connecting the source of supply, shall be fitted on the low pressure side of the reducing valve. (6) Pressure vessel or plant being taken into use: (a) No new pressure vessel or plant shall be taken into use in a factory after coming into force of this rule unless it has been hydrostatically tested by a competent person at a presure at least 1.3 times the design pressure, and no pressure vessel or plant which has been previously used or has remained isolated or idle for a period exceeding two months or which has undergone alterations or repairs shall be taken into use in a factory unless it has been thoroughly examined by a competent person externally and internally, if practicable and has been hydrostatically tested by the competent person at a pressure which shall be 1.5 times the maximum permissible working pressure; Provided, however, that the pressure vessel or plant which is so designed and constructed that it cannot safely filled with water or liquid or is used in service when even some traces of water cannot be tolerated, shall be pneumatically tested at a pressure not less than the design pressure or the maximum permissible working pressure, as the case may be; Provided further that the pressure vessel or plant which is lined with glass shall be tested hydrostatically or pneumatically as required at a pressure not less than the design pressure or maximum permissible working pressure as the case may be. Design pressure shall be not less than the maximum permissible working pressure and shall take into account the possible fluctuations of pressure during actual operation. (b) No pressure vessel or plant shall be used in a factory unless there has been obtained from the maker of the pressure vessel or plant or from the competent person a certificate specifying the design pressure or maximum permissible working pressure thereof, and stating the nature of tests to which the pressure vessel or plant and its fittings (if any) have been subjected and every pressure vessel or plant so used in a factory shall be marked so as to enable it to be identified as to be the pressure vessel or plant to which the certificate relates and the certificate shall be kept available for perusal by the Inspector. (c) No pressure vessel or plant shall be permitted to be operatrd or used at pressure higher than its design pressure, or the maximum permissible working pressure as shown in the certificate. (7) In-service test and examination: (a) Every pressure vessel or plant in service shall be thoroughly examined by a Competent Person— (i) externally, once in every period of six months; (ii) internally, once in every period of twelve months; Provided that if by the reason of the construction of a pressure vessel or plant, a thorough internal examination is not possible this examination may be replaced by a hydrostatic test which shall be carried out in every period of two years; Provided further that for a pressure vessel or plant in continuous process which cannot be frequently opened, the period of internal examination may be extended to four years; and (iii) hydrostatically tested once in every period of four years; Provided that in respect of a pressure vessel or plant with thin walls, such as sizing cylinder made of copper or any other non-ferrous metal, periodic hydrostatic test may be dispensed with subject to the condition that the requirements laid down in sub-rule (8) are fulfilled;
![Page 38: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/38.jpg)
38 Provided further that when it is impracticable to carry out thorough external examination of any pressure vessel or plant every six months as required in sub-clause (i) of this clause or if owing to its construction and use a pressure vessel or plant cannot be hydrostatically tested as required in sub-clauses (ii) and (iii) of this clause, a thorough external examination of the pressure vessel or plant shall be carried out at least once in every period of two years, and at least once in every period of four years a thorough systematic non-destructive test like ultrasonic test for metal thickness or other defects of all parts the failure of which might lead to eventual rupture of the pressure vessel or plant, shall be carried out. (b) The pressure for the hydrostatic test to be carried out for the purpose of this sub-rule shall be 1.25 times the design pressure or 1.5 times the maximum permissible working pressure, whichever is less. (8) Thin walled pressure vessel or plant: (a) In respect of any pressure vessel or plant of thin walls such as sizing cylinder made of copper or any other non-ferrous metal, the maximum permissible working pressure shall be reduced at the rate of 5 percent of the original maximum permissible working pressure for every year of its use after the first five years and no such cylinder shall be allowed to continue to be used for more than twenty years after it was first taken into use. (b) If any information as to the date of construction, thickness of walls or maximum permissible working pressure is not available, the age of such pressure vessel or plant shall be determined by the Competent Person in consultation with the Chief Inspector from the other particulars available with the Manager. (c) Every new and second hand pressure vessel or plant of thin walls to which repairs likely to affect its strength or safety have been carried out, shall be tested before use to at least 1.5 times its maximum permissible working pressure. (9) Report by Competent Person: (a) If during any examination any doubt arises as to the ability of the pressure vessel or plant to work safely until the next prescribed examination, the Competent Person shall enter in the prescribed Register his observations and conclusions with other relevant remarks with reasons and may authorise the pressure vessel or plant to be used and kept in operation subject to a lowering of maximum permissible working pressure, or to more frequent or special examination, test or subject to both these conditions. (b) A report of every examination or test carried out shall be completed in Form 11 and shall be signed by the person making the examination or test and shall be kept available for perusal by the Inspector at all hours when the factory or any part thereof is working. (c) Wher the report of any examination under this rule specified amy condition for securing the safe working of any pressure vessel or plant, the pressure vessel or plant shall not be used unless the specified condition is fulfilled. (d) The Competent Person making report of any examination under this rule, shall within seven days of the completion of the examination send to the Inspector a copy of the report in every case where the maximum permissible working pressure is reduced or the examination shows that the pressure vessel or plant or any part thereof cannot continue to be used with safety unless certain repairs are carried out or unless any other safety measure is taken. (10) Application of other laws: (a) The requirements of this rule shall be in addition to and without any prejudice to and not in derogation of the requirements of any other law in force. (b) Certificates or reports of any examination or test of any pressure vessel or plant to which sub-rule (7) to (9) do not apply, conducted or required to be conducted under any other law in force and other relevant record relating to such pressure vessel or plant, shall be properly maintained as required under the said law and shall be produced on demand by the Inspector. 64. Water-sealed gasholder: (1) The expression 'Gasholder' means a water sealed gasholder which has a storage capacity of not less than 141.5 cubic metres. (2) Every gasholder shall be of adequate material and strength, sound construction and properly maintained. (3) Where there is more than one gasholder in a factory, every gasholder shall be marked in a conspicuous position with a distinguishing number or letter. (4) Every gasholder shall be thoroughly examined externally by a Competent Person at least once in a period of 12 months. (5) In the case of gasholder of which any lift has been in use for more than 10 years, the internal state of the sheeting shall, within one year of the coming into operation of these rules and thereafter at least once in every period of four years, be examined by a Competent Person by means of electronic or other accurate devices; Provided that if the Chief Inspector is satisfied that such electronic or other accurate devices are not available, he may permit the cutting of samples from the crown and the sides of the holder; Provided further that if the above examination raises a doubt, an internal visual examination shall be made. (6) All possible steps shall be taken to prevent or minimise ingress of impurities in the gasholder (7) No gasholder shall be repaired or demolished except under the direct supervision of a person who, by his training, experience and knowledge of the necessary precautions against risks of explosion and of persons being overcome by gas is competent to supervise such work.
![Page 39: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/39.jpg)
39 (8) (a) All sample discs cut under sub-rule (5) above shall be kept readily available for inspection. (b) A permanent Register in Form 12 duly signed by the Occupier or Manager shall be maintained. (c) The results of examinations by the Competent Person carried out as required under sub-rules (4) and (5) shall be recorded in Form 13. (d) A copy of the report in Form 13 shall be kept in the Register in Form 12 and both the Register and the Report shall be readily available for inspection. (9) The Inspector of Factories shall inspect the gasholder at least once in a period of 12 months. Rule presdcribed under 65. Excessive weights: (1) No man, woman or young person shall, unaided by Sub-section (2) of Section 34. another person, lift, carry or move by hand or on head, any material, article, tool or appliance exceeding the maximumlimit in weight set out in the following schedule:— SCHEDULE _____________________________________________________________________________________________ Persons. Maximum weight of material, article, tool or appliance. _____________________________________________________________________________________________ (a) Adult male ..... ..... 55 Kilograms (b) Adult Female ..... ..... 30 Kilograms (c) Adolescent male ..... ..... 30 Kilograms (d) Adolscent female ..... ..... 20 Kilograms (e) Male child ..... ..... 16 Kilograms (f) Female child ..... ..... 14 Kilograms _____________________________________________________________________________________________ (b) No woman or young person shall engage, in conjunction with others, in lifting,carrying or moving by hand or on head, any material, article, tool or appliance, if the weight thereof exceeds the lowest weight fixed by the Schedule to Sub-rule (1) for any of the persons engaged, multiplied by the number of persons engaged. Rule prescribed 66. Protection of eyes: Effective screens or suitable goggles shall be provided for the protection Under Section 35 of persons employed in or in the immediate vicinity of the following processes:— (a) The process specified in Schedule I annexed hereto, being processes which involve risk of injury to eyes from particles or fragments thrown off in the course of the processes. (b) The processes specified in Schedule II annexed hereto being processes wich involve risk of injury to eyes by reason of exposure to excessive light or infra-red or ultra-violet radiations. SCHEDULE I 1. Breaking,cutting, dressing or curving of bricks, stone, concrete slag or similar materials by means of a hammer,chisel, pick or similar hand tool, or by means of a portable tool driven by mechanical power, and the dry grinding of surfaces of any such material by means of wheel or disc driven by mechanical power where in any of the foregoing cases, particles or fragments are liable to be thrown off towards the face of the operator in the course of the process. 2. Dry grinding of surfaces of metal by applying them by hand to a wheel, disc or hand driven by mechanical power, and of surfaces of metal by means of a portable tool driven by mechanical power. 3. Dividing into separate parts of metal, bricks, stone, concrete or similar materials by means of a high speed saw driven by mechanical power or by means of an abrasive cutting-off wheel or disc driven by mechanical power. 4. Turning of metals or articles of metal, where particles or fragments are liable to be thrown off towards the face of the operator in the course of the process. 5. Drilling by means of portable tools, where the particles or fragments are liable to be thrown off towards the face of the operator in the course of the process. 6. Welding and cutting of metals by means of an electric, oxy-acetylene or similar process. 7. Hot fettling of steel castings by means of a flux-injected burner or air torch and de-seaming of metal. 8. Fettling of metal castings involving the removal of metal including runners, gates and risers; and removal of any other material during the course of such fettling. 9. Chipping of metal; and chipping, knocking out, cutting out or cutting off of cold rivets, bolts, nuts, lugs,pins, collars or similar articles from any structure or plant, or from part of any structure or plant, by means of a hammer, chisel, punch or similar hand tool, or by means of a portable tool driven by mechanical power.
![Page 40: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/40.jpg)
40 10. Chipping or scurfing of paint, scale, slag, rust or other corrosion from the surface of metal and other hard materials by means of a hand tool or by a portable tool driven by mechanical power. 11. Breaking of scrap metal by means of a hammer or by means of a tool driven by mechanical power. 12. Routing of metal, where particles or fragments are liable to be thrown off towards the face of the operator in the course of the process. 13. Work with drop hammers and power hammers used in either case for the manufacture of forgings, and work by any person not working with such hammers, whose work is carried on in such circumstances and in such a position that particles or fragments are liable to be thrown off towards his face during work with drop hammers or power hammers. 14. Work at a furnace where there is risk to the eye from molten metal. 15. Pouring or skimming of molten metal. 16. Work involving risk to the eyes from hot sand being thrown off. 17. Truing or dressing of an abrasive wheel. 18. Handling in open vessels or manipulation of strong acids or dangerous corrosive liquids or materials; and operation, maintenance or dismantling of plant or any part of plant, being plant or part of plant which contains or has contained such acids, liquids or materials, unless the plant or part of plant has been so prepared (by isolation, reduction of pressure or otherwise) treated or designed and constructed as to prevent risk of injury. 19. Any other process wherein there is a risk of injury to eyes from particles or fragments thrown off during the course of the process. SCHEDULE II 1. Welding or cutting of metals by means of an electrical, oxy-acetylene or similar process. 2. All work on furnaces where there is risk of exposure to excessive light or infra-red radiations. 3. Process such as rolling, casting or forging of metals where there is risk of exposure to excessive light or infra-red radiations. 4. Any other process wherein there is risk of injury to eyes from exposure to excessive light or infra-red or ultra-violet radiations. Rule prescribed under 67. Minimum dimensions of manholes: Every chamber, tank, vat, pipe, flue or other Sub-section(6) of confined space, which persons may have to enter and which may contain dangerous fumes Section 36. to such an extent as to involve risk of the persons being overcome thereby, shall unless there is other effective means of egress, be provide with a manhole which may be rectangular, oval or circular in shape; and which shall— (a) In the case of a rectangular or oval shape, be not less than 40 cm long and 30 cm wide; and (b) in the case of a circular shape, be not less than 40 cm in diameter. Exemptions under 68. Exemption: The requirements of Sub-Section (4) of Section 37 shall not apply to the Sub-section (5) of following processes carried on in any factory:— Section 37. (a) the operation of repairing a water sealed gas holder by the electric welding process, sybject to the following conditions:— (i) the gas holder shall contain only the following gases separately or mixed at a pressure greater than atmospheric pressure, namely, town gas, coke-oven gas, producer gas, blast furnace gas or gases other than air used in their manufacture; Provided that this exemption shall not apply to any gas holder containing acetylene or mixture of gases to which acetylene has been added intentionally; and (ii) Welding shall only be done by the electric welding process and shall be carried out by experienced operatives under the constant supervision of a competent person; (b) the operations of cutting or welding steel or wrought iron by gas mains and services by the application of heat, subject to the following conditions: (i) the main or service shall be situated in the open air and it shall contain only the following gases, separately or mixed at a pressure greater than atmospheric pressure, namely; town gas or coke-oven gas, producer gas, blast furnace gas or gases other than air, used in their manufacture; (ii) the main or service shall not contain acetylene or any gas or mixture of gases to which acetylene has been added intentionally; (iii) the operation shall be carried out by an experienced person or persons and at least two persons (including those carrying out the operations) experienced in work on gas mains and over 18 years of age shall be present during the operation; (iv) the site of the operation shall be free from any flammable or explosive gas or vapour; (v) where acetylene gas is used as a source of heat in connection with an operation, it shall be compressed and contained in a porous substance in a cylinder; and
![Page 41: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/41.jpg)
41 (vi) prior to the application of any flame to the gas main or service, this shall be pierced or drilled and the escaping gas ignited; (c) the operation of repairing an oil tank on any ship by the electric welding process shall be subject to the following conditions:— (i) the only oil contained in the tank shall have a flash point of not less than 65.5 degrees centigrade (close test) and a certificate to the effect shall be obtained from a competent analyst; (ii) the analyst's certificate shall be kept available for inspection by an Inspector , or by any person employed or working on the ship; (iii) the welding operation shall be carried out only on the exterior surface of the tank at a place: (a) which is free from oil or oil leakage in flammable quantities and (b) which is not less than 30 centimetres below the nearest part of the surface of the oil within the tank; and (iv) welding shall be done only by the electric welding and shall be carried out by experienced operatives under the constant supervision of a competent person. Rule prescribed under 69. Fire Protection: Sub-Section(i) of Section 38 (1) Processes, equipment, plant etc. Involving serious explosion and serioous fire And 41. hazards: (a) All processes, storages, equipments, plants etc. involving serious explosion and flash fire hazard shall be located in segregated buildings where the equipment shall be so arranged that only a minimum number of employees are exposed to such hazards at any one time. (b) All industrial processes involving serious fire hazard shall be located in building or work places separated from one another by walls of fire-resistant construction. (c) Equipment and plant involving serious fire or flash fire hazard shall wherever possible, be so constructed and installed that in case of fire,they can be easily isolated. (d) Ventilation ducts, pneumatic conveyors and similar equipments involving a serious fire risk should be provided with flame-arresting or automatic fire extinguishing appliances or fire resisting dampers electrically interlocked with heat sensitive smoke detectors and the air-conditioning plant system. (e) In all work places having serious fire or flash fire hazards, passages between machines, installations or piles of material should be at least 90 cm. wide. For storage piles, the clearance between the ceiling and the top of the piles should not be less than 2 m. (2) Access for fire fighting: (a) Buildings and plants shall be so laid out and roads, passage ways etc., so maintained as to permit unobstructed access for fire fighting. (b) Doors and window openings shall be located in suitable positions on all external walls of the building to provide easy access to the entire area within the building for fire fighting. (3) Protection against lightning: Protection from lightning shall be provided for— (a) buildings in which explosive or highly flammable substances are manufactured, used, handled or stored; (b) storage tanks containing oils, paints or other flammable liquids; (c) grain elevators; (d) buildings, tall chimneys or stacks where flammable gases, fumes, dust or lint are likely to be present; and (e) sub-station buildings and out-door transformers and switch yard. (4) Precaution against ignition: Wherever there is danger of fire or explosion from accumulation of flammable or explosive substances in air— (a) all electrical apparatus shall either be excluded from the area of risk or they shall be of such construction and so installed and maintained as to prevent the danger of their being a source of ignition; (b) effective measures shall be adopted for prevention of accumulation of static charges to a dangerous extent; (c) workers shall wear shoes without iron or steel nails or any other exposed ferrous materials which is likely to cause spark by friction; (d) smoking, lighting or carrying of matches, lighters or smoking materials shall be prohibited; (e) transmission belts with iron fasteners shall not be used; and (f) all other precautions, as are reasonably practicable, shall be taken to prevent initiation of ignition from all other possible sources such as open flames, frictional sparks, overheated surfaces of machinery or , plant, chemical or physical-chemical reaction and radiant heat. (5) Spontaneous ignition: Where materials are likely to induce spontaneous ignition, care shall be taken to avoid formation of air pocket and to ensure adequate ventilation. The material susceptible to spontaneous ignition should be stored in dry condition and should be in heaps of such capacity and separated by such passage which will prevent fire. The material susceptible to ignition and stored in the open shall be at a distance not less than 10 metres away from process or storage buildings. (6) Cylinders containing compressed gas: Cylinders containing compressed gas may only be stored in open if they are protected against excessive variation of temperature, direct rays of sun or continuous dampness. Such cylinders shall never be stored near highly flammable substances, furnaces or hot processes. The room where such cylinders are stored shall have adequate ventilation.
![Page 42: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/42.jpg)
42(7) Storage of flammable liquids: (a) The quantity of flammable liquids in any work room shall be the minimum required for the process or processes carried on in such room.Flammable liquids shall be stored in suitable containers with close fitting covers; Provided that not more than 20 litres of flammable liquids having a flash point of 21°C or less shall be kept or stored in any work room. (b) Flammable liquids shall be stored in closed containers and in limited quantities in well ventilated rooms of fire-resisting construction which are isolated from the remainder of the building by fire walls and self closing fire doors. (c) Large quantities of such liquid shall be stored in isolated adequately ventilated building of fire resisting construction or in storage tanks, preferably under ground and at a distance from any building required in the Petroleum Rules, 1976. (d) Effective steps shall be taken to prevent leakage of such liquids into basements, sumps or drains and to confine in any escaping liquid within safe limits. (8) Accumulation of flammable dust, gas, fume or vapour in air or flammable waste material on the floors: (a) Effective steps shall be taken for removal or prevention of the accumulation in the air of flammable dust, gas, fume or vapour to an extent which is likely to be dangerous. (b) No waste material of a flammable nature shall be permitted to accumulate on the floors and shall be removed at least once in a day or shift, and more often, when possible. Such materials shall be placed in suitable metal containers with covers wherever possible. (9) Fire exits: (a) Inthis rule— (i) "Horizontal exit" means an arrangement which allows alternative agress from a floor area to another floor at or near the same level in an adjoining building or an adjoining part of the same building with adequate separation; and (ii) "Travel distance" means the distance an occupant has to travel to reach an exit. (b) An exit may be a door way, corridor, passage-way to an external stairway or to a verandah or to an internal stairway segregated from the rest of building by fire resisting walls which shall provide continuous and protected means of egress to the exterior of a building or to an exterior open space. An exit may also include a horizontal exit leading to an adjoining building at the same level. (c) Lifts, escalators and revolving doors shall not be considered as exits for the purpose of this sub-rule. (d) In every room of a factory, exits sufficient to permit safe escape of the occupants in case of fire or other emergency shall be provided which shall be free of any obstruction. (e) The exits shall be clearly visible and suitably illuminated with suitable arrangements, whatever artificial lighting is to be adopted for this purpose, to maintain the required illumination in case of failure of the normal source of electric supply. (f) The exits shall be marked in a language understood by the majority of the workers. (g) Iron rung ladders or spiral staircases shall not be used as exit stair cases. (h) Fire resisting doors or roller shutters shall be provided at appropriate places along the escape routs to prevent spread of fire and smoke particularly at the entrance of lifts or stairs where funnel or flue effect may be created inducing an upward spread of fire. (i) All exits shall provide continuous means of egress to the exterior of a building or to an exterior open space leading to a street. (j) Exits shall be so located that the travel distance to reach at least one of them on the floor shall not exceed 30 metres. (k) Incase of those factories where high hazard materials are stored or used, the travel distance to the exit shall not exceed 22∙5 metres and there shall be at least two ways of escape from every room, however small, except toilet rooms, so located that the point of access thereto are out of or suitably shielded from areas of high hazard. (l) Wherever more than one exit is required for any room, space or floor, exits shall be placed as remote from each other as possible and shall be arranged to provide direct access in separate directions from any point in the area served. (m) The unit of exit width used to measure capacity of any exit shall be 50 cm. A clear width of 25 cm shall be counted as an additional half unit. Clear width of less than 25 cm. shall not be counted for exit width. (n) Occupants per unit width shall be 50 for stairs and 75 for doors. (o) For determining the exits required, the occupant load shall be reckoned on the basis of actual number of occupants within any floor area or 10 square metres per person, whichever is more. (p) There shall not be less than two exits serving every floor area above and below the groumd floor, and at least one of them shall be an internal enclosed stairway. (q) For every building or structure used for storage only and every section thereof considered separately, shall have access to at least one exit so arranged and located as to provide a suitable means of escape for any persons employed therein, and in any such room wherein more than ten persons may be normally present, at least two separate means of exit shall be available, as remote from each other as practicable. (r) Every storage area shall have access to at least one means of exit which can be readily opened.
![Page 43: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/43.jpg)
43 (s) Every exit doorway shall open into an enclosed stairway, a horizontal exit on a corridor or passageway providing continuous and protected means of egress. (t) No exit doorway shall be less than 100 cm. in width. Doorways shall be not less than 200 cm. in height. (u) Exit doorways shall open outwards, that is away from the room but shall not obstruct the travel along any exit. No door when opened, shall reduce the required width of stairway or landing to less than 90 cm.overhead or sliding doors shall not be installed for this purpose. (v) An exit door shall not open immediately upon a flight of stairs. A landing of at least 1∙5mx 1∙5m size shall be provided in the stairway at each doorway. The level of landing shall be the same as that of the floor which it serves. (w) The exit doorway shall be openable from the side which they serve without the use of key. (x) Exit corridors and passageways shall be of a width not less than the aggregate required width of exit doorways leading from there in the direction of travel to the exterior. (y) Where stairways discharge through corridors and passageways, the height of the corridors and passageways shall not be less than 2∙4 metres. (aa) A staircase shall not be arranged round a lift shaft unless the latter is totally enclosed by a material having a fire resistance rating lower than that of the type of construction of the former. (bb) Hollow combustible construction shall not be permitted. (cc) The minimum width of an internal staircase shall be 100cm. (dd) The minimum width of treads without nosing shall be 25cm. for an internal staircase. The treads shall be constructed and maintained in a manner to prevent slipping. (ee) The maximum height of a riser shall be 19 cm., and the number of risers shall be limited to 12 per flight. (ff) Hand rail shall be provided with a minimum height of 100cm. and shall be firmly supported. (gg) The use of spiral staircase shall be limited to low occupant load and to a building of height of 9 metres, unless they are connected to platforms such as balconies and terraces to allow escapees to pause. A spiral staircase shall be not less than 300 cm. in diameter and have adequate head room. (hh) The width of a horizontal exit shall be same as the exit doorways. (ii) The horizontal exit shall be equipped with at least one fire door of self closing type. (jj) The floor area on the opposite or refuge side of a horizontal exit shall be sufficient to accommodate occupants of the floor areas served,allowing not less than 0∙3 square metre per person. The refuge area shall be provided with exit adequate to meet the requirements of this sub-rule. At least one of the exits shall lead directly to the exterior or street. (kk) Where there is difference in level between connected area for horizontal exit,ramps not more than 1 in 8 slope shall be provided.For this purpose steps shall not be used. (ll) Doors in horizontal exits shall be openable at all times. (mm) Ramps with a slope of not more than 1 in 10 may be substituted for the requirements of staircase.For all slopes exceeding 1 in 10 and wherever the use is such as to involve danger of slipping, the ramp shall be surfaced with non-slipping material. (nn) In any building not provided with automatic fire alarm a manual fire alarm system shall be provided if the total capacity of the building is over 500 persons,or if more than 25 persons are employed above or below the ground floor;except that no manual fire alarm shall be required in one-storey buildings where the entire area is undivided and all parts thereof are clearly visible to all the occupants. (10) First-aid fire fighting arrangements: (a) Inevery factory there shall be provided and maintained adequate and suitable fire fighting equipment for fighting fire in the early stages,those being referred to as first-aid fire fighting equipment in this rule. (b) The type of first-aid fire fighting equipment to be provided shall be determined by considering the different types of fire risks which are classified as follows:— (i) Class A fire: Fire due to combustible materials such as wood,textiles,paper,rubbish and the like. 1. "Light hazard": Occupancies like offices,assembly halls,canteens,rest-rooms,ambulance rooms and the like. 2. "Ordinary hazard": Occupancies like saw mills,carpentry shop,small timber yards,book binding shops,engineering workshop and the like. 3. "Extra hazard": Occupancies like large timber yards,godown storing fibrous materials,flour mills,cotton mills,jute mills,large wood working factories and the like. (ii) Class B fire: Fire in flammable liquids like oil,petroleum products,solvents,grease,paints etc. (iii) Class C fire: Fire arising out of gaseous substances. ( iv) Class D fire: Fire from reactive chemicals,active metals and the like. (v) Class E fire: Fire involving electrical equipment and delicate machinery and the like. (c) The number and types of first of first-aid fire fighting equipment to be provided for 'light hazard' occupancy shall be as given in Schedule I. For 'ordinary hazard or extra hazard' occupancies equipment as given in paragraph 12 shall be provided in addition to that given in Schedule I. (d) The first-aid fire fighting equipment shall conform to the relevant Indian Standards. (e) As far as possible the first-aid fire fighting equipment shall all be similar in shape and appearance and shall have the same method of operation.
![Page 44: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/44.jpg)
44 (f) all first-aid fire fighting equipment shall be placed in a conspicuous position and shall be readily and easily accessible for immediate use. Generally, these equipments shall be placed as near as possible to the exits or stair landing or normal routes of escape. (g) All water buckets and bucket pump type extinguishers shall be filled with clean water. All sand buckets shall be filled with clean,dry and fine sand. (h) All other extinguishers shall be charged appropriately in accordance with the instructions of the manufacturer. (i) Each first-aid fire fighting equipment shall be alloted a serial number by which it shall be referred to in the records. The following details shall be painted with white paint on the body of each equipment:— 1. Serial number; 2.Date of last refilling; and 3.Date of last inspection. (j) First-aid fire fighting equipment shall be placed on the platforms or in cabinets in such a way that their bottom is 750 mmabove the floor level. Fire buckets shall be placed on hooks attached to a suitable stand or wall in such a way that their bottom is 750 mm above the floor level. Such equipment if placed outside the building shall be under sheds or covers. (k) All extinguishers shall be thoroughly cleaned and re-charged immediately after discharge. Sufficient refill material shall be kept readily available for this purpose at all times. (l) All first-aid fire fighting equipment shall be subjected to routine maintenance, inspection and testing to be carried out by properly trained persons.Periodicity of the routine maintenance, inspection and test shall conform to the relevant Indian Standards. (11) Other fire-fighting arrangements: (a) In every factory adequate provision of water supply for fire fighting shall be made and where the amount of water required in litres per minute, as calculated from the formula A+B+C+D divided by 20 is 550 or more, power driven trailer pumps of adequate capacity to meet the requirement of water as calculated above shall be provided and maintained. Inthe above formula:— A= The total area in m² (square metres) of all floors including gallaries in all buildings of the factory; B= The total area in m² of all floors and gallaries including open spaces in which combustible materials are handled or stored; C= The total area in m² of all floors over 15 metres above ground floor level; and D= The total area in m² of all floors of all buildings other than those of fire resisting construction. Provided in areas where the fire risk involved does not require use of water, such areas under B,C or D may, for the purpose of calculation, be halved. Provide further that where the areas under B,C or D are protected by permanent automatic fire-fighting installations approved by any fire association or fire insurance company, such areas may, for the purpose of calculation, be halved. Provided also that where the factory is situated at not more than 3 Kilometres from an established city or town fire service, the pumping capacity based on the amount of water arrived at by the formula above may be reduced by 25%;but no account shall be taken of this reduction in calculating water supply required under clause(a). (b) Each trailer pump shall be provided with equipment as per Schedule II appended to this rule. Such equipment shall conform to the relevant Indian Standards. (c) Trailer pumps shall be housed in a separate shed or sheds which shall be sited closed to a principal source of water supplies in the vicinity of the main risks of the factory. (d) In factories where the area is such as cannot be reached by man-hauling of trailer pumps within reasonable time vehicles with towing attachment shall be provided at the scale of one for every four trailer pumps with a minimum of one such vehicle kept available at all times. (e) Water supply shall be provided to give flow of water as required under clause (a) for at least 100 minutes. At least 50% of this water supply or 450,000 litres whichever is less, shall be in the form of static tanks of adequate capacities (not less than 450,000 litres each) distributed round the factory, with due regard to the potential fire risks in the factory. (Where piped supply is provided, the size of the main shall not be less than 15 centimetres diameter and it shall be capable of supplying a minimum of 4,500 litres per minute at a pressure of not less than 7 Kilograms per square centimetre) (f) All trailer pumps including the equipment provided with them and the vehicles for towing them shall be maintained in good condition and subjected to periodical inspection and testing as required. (12) Personnel in charge of equipment and for fire-fighting, fire drills etc.:— (a) The first-aid and other fire fighting equipment to be provided as required in sub-rules(10) and (11) shall be in charge of a trained responsible person. (b) Sufficient number of persons shall be trained in the proper handling of fire-fighting equipment as referred to in clause (a) and their use agaiinst the types of fire for which they are intended to ensure that adequate number of persons are available for fire fighting both by means of first-aid fire fighting equipment and others. Such persons
![Page 45: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/45.jpg)
45shall be provided with clothing and equipment including helmets, belts and boots, preferably gumboots. Wherever vehicles with towing attachments are to be provided as required in clause (d) of sub-rule (11), sufficient number of persons shall be trained in driving these vehicles to ensure that trained persons are available for driving them whenever the need arises. (c) Fire-fighting drills shall be held as often as necessary and at least once in every period of two months. (13) Automatic sprinklers and fire hydrants shall be in addition and not in substitution of the requirements in sub-rules (10) and (11). (14) If the Chief Inspector is satisfied in respect of any factory or any part of the factory that owing to the exceptional circumstances such as inadequacy of water supply or infrequency of the manufacturing process or for any other reason, to be recorded in writing, all or any of the requirements of the rules are impracticable or are not necessary for the protection of workers, he may by an order in writing (which he may at his discretion revoke) exempt such factory or part of the factory from all or any of the provisions of the rules subject to conditions as he may by such order prescribe. SCHEDULE I First-aid fire fighting equipments (1) The different types of first-aid fire fighting equipment suitable for use on them are as follows:— Class of fire Suitable type of appliances A Fires in ordinary combustibles (Wood, - Chemical Extinguishers of Soda-acid, gas-expelled water and vegetable fibres,paper and the like) anti-freeze types and water buckets. B Fires in flammable liquids,paints,grease, - Chemical Extinguishers of foam,carbon dioxide and dry powder Solvents and the like. types and sand buckets. C Fires in gaseous substances under pressure. - Chemical Extinguishers of carbon dioxide and dry powder types. D Fires in reactive chemichals,active metals - Special types of dry powder Extinguishers and sand buckets. and the like. E Fires in electrical equipments. - Chemical Extinguishers of carbon dioxide and dry powder type and sand buckets. (2) One 9 litre bucket shall be provided for every 100 sq.m. of the floor area or part thereof and one 9 litres water type Extinguisher shall be provided to six buckets or part thereof with a minimum of one Extinguisher and two buckets per compartment of the building. Buckets may be dispensed with, provided supply of Extinguishers is double that indicated above. (3) Acceptable replacements for water buckets and water type extinguishers in occupancies where Class B fires are anticipated, are as under:- __________________________________________________________________________________________ Acceptable Buckets of water Water type Replacements Extinguishers _____________________________________________________________________________________________ For one bucket For three buckets For each 9litres(2 gallons)Extinguisher _____________________________________________________________________________________________ Dry sand 1 bucket - 3 buckets ........... Carbondioxide 3 Kg.(7lbs) - 9 Kg(20 lbs) - 9Kg(20lbs) Extinguishers [ In not less than 2 extinguishers ] Dry powder extinguishers 2 Kg (5 lbs) - 5 Kg (11 lbs) - 5Kg (11 lbs) [ In one or more extinguishers ] Foam extinguishers 9litres (2 gallons) - 9litres (2 gallons) - 9 litres (2 gallons) _____________________________________________________________________________________________ (4) The following provisions shall be complied with where Class E fires are anticipated: (a) For rooms containing electrical transformers, switchgears, motors and/ or other electrical apparatus only, not less than two 2-Kg. Dry powder or Carbon Dioxide type extinguishers shall be provided within 15 m. of apparatus. (b) Where motors and/ or other electrical equipments are installed in rooms other than those containing such equipment only, one 5kg. Dry powder or Carbon Dioxide Extinguisher shall be installed within 15 m. Of such
![Page 46: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/46.jpg)
46equipment in addition to the requirements as mentioned at (2) and (3) above. For this purpose the same extinguisher may be deemed to afford protection to all apparatus within 15 m. thereof. (c) Where electrical motors are installed on platform, one 2-kg. Dry Powder or Carbon Dioxide type extinguisher shall be provided on or below each platform. In case of a long platform with a number of motors, one extinguisher shall be acceptable as adequate for every 3 motors on the common platform. The above requirements will be in addition to the requirements mentioned at items (2) and (3) above. (5) The first-aid fire fighting equipments shall be so distributed over the entire floor area that a person has to travel not more than 15 m. to reach the nearest equipment. (6) Selection of sites for the installation of first-aid fire fighting equipments:— (a) While selecting sites for first-aid fire fighting equipments,due consideration shall be given to the nature of the risk to be covered. The equipments shall be placed in conspicuous position and shall be readily accessible for immediate use in all parts of the occupancy. It should always be borne in mind while selecting sites that first-aid fire fighting equipments are intended only for use on incipient fires and their value may be negligible if the fire is not extinguished or brought under control in the early stages. (b) Buckets and extinguishers shall be placed at convenient and easily accessible locations either on hangers or on stands in such a way that their bottom is 750 mm above the floor level. (7) The operating instructiopns of the extinguishers shall not be defaced or obliterated. In case the operating instructions are obliterated or have become illegible due to passage of time, fresh transfers of the same shall be obtained from the manufacturers of the equipments and affixed to the extinguishers. SCHEDULE II Equipments to be provided with Trailer Pump -:For light trailer pump of a capacity of 680 litres/minute:- No. Description No. Description ____________________________________________________________________________________________ 1 - Armoured suction hose of 9 metres 1 - Fire hook (Preventor) with cutting edge. length, with wrenches. 1 - 25 mm manila rope of 30 metres length. 1 - Metal suction strainer. 1 - Extension ladder of 9 metres lenght (Where necessary) 1 - Basket strainer. 1 - Heavy axe. 1 - Two-way suction collecting head. 1 - Spade. 1 - Suction adapter. 1 - Pick axe 10 - Unlined or rubber-lined 70 mm delivery 1 - Crowbar. hose of 25 metres length complete with 1 - Saw. quick-release couplings. 1 - Hurricane lamp. 1 - Dividing breaching-piece. 1 - Electric torch. 2 - Branch-piece with 15 mm nozzles. 1 - pair Rubber gloves. 1 - Diffuser nozzle. 1 - Stand pipe with blank cap. 1 - Hydrant key. 4 - Collapsible canvas buckets. ____________________________________________________________________________________________ For large trailer pump of capacity of 1800 litres/minute. 1 - Armoured suction hose of 9 metres length 1 - Coiling hook (preventor)with cutting edge. with wrenches. 1 - 50mm manila rope of 30 m length. 1 - Metal strainer. 1 - Extension ladder of 9m length (where necessary) 1 - Basket strainer. 1 - Heavy axe. 1 - Three-way suction collecting head. 1 - Spade. 1 - Suction adaptor. 1 - Pick axe. 14 - Unlined or rubber-lined 70 mm delivery hose 1 - Crowbar. of 25 m length complete with quick-release 1 - Saw. couplings. 1 - Hurricane lamp. 1 - Dividing breathing-piece. 1 - Electric torch. 1 - Collecting breathing piece. 1 - Pair rubber gloves. 4 - Branch pipes with one 25 mm,two 20 mm and one diffuser nozzles.
![Page 47: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/47.jpg)
47 2 - Stand pipe with blank caps. 2 - Hydrant keys 6 - Collapsible canvas buckets. _____________________________________________________________________________________________ Note: If it appears to the Chief Inspector Of Factories that in any factory the provision of breathing apparatus is necessary, he may, by order in writing require the occupier to provide suitable breathing apparatus in addition to the equipment for light trailer pump or large trailer pump, as the case may be. [* Rule70 deleted] Rule prescribed 71. Safety Officers: (1) Qualification: (a) A person shall not be eligible for appopintment as Under Section 40-B a Safety Officer unless he (i) possesses— (aa) A recognised degree in any branch of engineering or technology and has had practical experience of working in a factory in a supervisory capacity for a period of not less than 2 years; or (bb) a recognised degree in physics or chemistry and has had practical experience of working in a factory in a supervisory capacity for a period of not less than 5 years; or (cc) a recognised diploma in any branch of engineering or technology and has had practical experience of working in a factory in a supervisory capacity for a period of not less than 5 years; (ii) possesses a degree or diploma in industrial safety recognised by the State Government in this behalf; and (iii) has adequate knowledge of the language spoken by majority of the workers in the region in which the factory where he is to be appointed is situated. (b) Notwithstanding the provisions contained in clause (a) any person who— (i) possesses a recognised degree or diploma in engineering or technology and has had experience of not less than 5 years in a department of the Central or State Government which deals with the administration of the Factories Act,1948 or the Indian Dock Labourers Act,1934; or (ii) Possesses a recognised degree or diploma in engineering or technology and has had experience of not less than 5 years, full time, on training, education, consultancy or research in the field of accident-prevention in industry or in any institution; —shall also be eligible for appointment as a Safety Officer; Provided that the Chief Inspector may,subject to such conditions as he may specify, grant exemption from the requirements of this sub-rule, if in his opinion, a suitable person possessing the necessary qualifications and experience is not available for appointment. Provided further that, in the case of a person who has been working as a Safety Officer for a period of not less than 3 years on the date of commencement of this rule, the Chief Inspector may, sybject to such condition as he may specify, relax all or any of the above said qualification. (2) Conditions of service: (a) Where the number of Safety Officers to be appointed in a factory as required by a notification of the Official Gazette exceeds one, one of them shall be designated as the Chief Safety Officer and shall have a status higher than that of the others. The Chief Safety Officer shall be in overall charge of the safety functions as envisaged in sub-rule (3), other Safety Officers working under his control. (b) The Chief Safety Officer or the Safety Officer in the case of factories where only one Safety Officer is required to be appointed, shall be given the status of a senior executive and he shall work directly under the control of the Chief executive of the factory. All other Safety Officers shall be given appropriate status to enable them to discharge their functioins effectively. (c) The scale of pay and the allowances to be granted to the Safety Officers including the Chief Safety Officer and other conditions of their service shall be the same as those of the other officers of corresponding status in the factory. (d) In the case of dismissal or discharge, a Safety Officer shall have a right to appeal to the State Government whose decision thereon shall be final. (3) Duties of Safety Officers: (a) The duties of the Safety Officer shall be to advise and assist the factory management in the fulfilment of its obligations, statutory or othetwise, concerning prevention of personal injuries and maintaining a safe working environment. These duties shall include the following, namely:— (i) to advise the concerned departments in planning and organising measures necessary for the effective control of personal injuries; (ii) to advise on safety aspects in all job studies, and to carry out detailed job safety studies of selected jobs; (iii) to check and evaluate the effectiveness of the action taken or proposed to be taken to prevent personal injuries; (iv) to advise the purchasing and stores departments in ensuring high quality and availability of personal protective equipment;
![Page 48: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/48.jpg)
48 (v) to provide advice on matters related to carrying out plant safety inspections; (vi) to carry out plant safety inspections in order to observe the physical conditions of work and the work practices and procedures followed by workers and to render advice on measures to be adopted for removing the unsafe physical conditions and preventing unsafe actions by workers; (vii) to render advice on matters related to reporting and investigation of industrial accidents and diseases; (viii) to investigate selected accidents; (ix) to investigate the cases of industrial diseases contracted and dangerous occurrences reportable under rule 117; (x) to advise on the maintenance of such rexcords as are necessary relating to accidents, dangerous occurrences and industrial diseases; (xi) to promote setting up of Safety Committees and act as adviser and catalyst to such committees. (xii) to organise in association with the concerned departments, campaigns, competitions, contests and other activities which will develop and maintain the interest of the workers in establishing and maintaining safe conditions of work and procedures; and (xiii) to design and conduct either independently or in collaboration with the training department, suitable training and educational programme for the prevention of personal injuries. (4) Facilities to be provided to Safety Officers: An occupier of a factory shall provide each Safety Officer with such facilities, equipment and information as are necessary to enable him to discharge his duties effectively. (5) Prohibition of performance of other duties: No Safety Officer shall be required or permitted to do any work which is inconsistant with or detrimental to the performance of the duties prescribed in sub-rule (3). Rules 72 to 75 prescribed 72. Buildings and structures: No building, wall, chimney, bridge, tunnel, road, under Section 41 gallery, stairway, ramp, floor, platform, staging or other structure whether of a permanent or temporary character, shall be constructed, situated or maintained in any factory in such a manner as to cause risk of bodily injury. 73. Machinery and plant: No machinery, plant or equipment shall be constructed, situated, operated or maintained in any factory in such a manner as to cause risk of bodily injury. 74. Methods of work: No process or work shall be carried out in any factory in such a manner as to cause risk of bodily injury. 75. Stacking and storing of materials etc.: No materials or equipment shall be stacked or stored in such a manner as to cause risk of bodiloy injury. Rules 76 to 78 prescribed 76. Ovens and Driers: (1) Application: This rule shall apply to ovens and driers, except Under Section 41 & 112. those used in laboratories or kitchens of any establishment and those which have a capacity below 325 litres. (2) Definition: For the purpose of this rule, oven or drier means any closed structure, receptacle, compartment or box which is used for baking, drying or otherwise processing of any article or substance at a temperature higher than the ambient temperature of the air in the room or space in which the oven or drier is situated, and in which a flammable or explosive mixture of air and a flammable substance is likely to be evolved within the enclosed structure, receptacle, comparrtment or box or part thereof on account of the article or substance which is baked, dried or otherwise processed within it. (3) Separate electrical connection: Electrical power supplied to every oven or drier shall be by means of a separate circuit provided with an isolation switch. (4) Design, construction, examination and testing: (a) Every oven or drier shall be properly designed on sound engineering practice and be of good construction, sound materials and adequate strength, free from any patent defects and safe if properly used. (b) No oven or drier shall be taken into use in a factory for the first time unless a Competent Person has thoroughly examined all its parts and carried out the tests as are required to establish that the necessary safe systems and controls provided for safety are in operation for the process for which it is to be used and a certificate of such examination and tests signed by that Competent Person has been obtained and is kept available for inspection. (c) All parts of an oven or drier which has undergone any alterarion or repair which has the effect of modifying any of the design characteristics, shall not be used unless a thorough examination and tests as have been mentioned in clause (b) has been carried out by a Competent Person and a certificate of such examination and tests signed by that Competent Person has been obtained and is kept available for inspection. (5) Safety Ventilation: (a) Every oven or drier shall be provided with a positive and effective safety ventilation system using one or more motor-driven centrifugal fans so as to dilute any mixture of air and any flammable
![Page 49: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/49.jpg)
49substance that may be formed within the oven or drier and maintain the concentration of the flammable substance in the air at a safe level of dilution. (b) The safe level of dilution referred to in clause (a) shall be so as to achive a concentration of the concerned flammable substance in air of not more than 25% of its lower explosive limit. Provided that a level of concentration in air upto 50% of the lower explosive limit of the concerned flammable substance may be permitted to exist subject to the installation and maintenance of an automatic device which— (i) shows continuously the concentration of the flammable substances in air present in the oven or drier at any instant; (ii) sounds an alarm when the concentration of the flammable substance in air in any part of the oven or drier reaches a level of 50% of its lower explosive limit; and (iii) shuts down the heating system of the oven or drier automatically when the concentration in air of the flammable substance in any part of the oven or drier reaches a level of 60% of its lower explosive limit, is provided to the oven or drier and maintained in efficient working condition. (c) Nooven or drier shall be operated without its safety ventilation system working in an efficient manner. (d) No oven or drier shall be operated with a level of dilution less than what is referred to in clause(b). (e) Exhaust ducts of safety ventilation systems should be so designed and placed that their ducts discharge the mixture of air and flammable substance away from the work-rooms and not near windows or doors or other openings from where the mixture could re-enter the workrooms. (f) The fresh air admitted in to the oven or drier by means of the safety ventilation system shall be circulated adequately by means of circulating fan or fans through all parts of the oven or drier so as to ensure that there are no locations where the flammable substance can accumulate in the air or become pocketed to any dangerous degree. (g) Throttling dampers in any safety ventilation system should be so designed by cutting away a portion of the damper or otherwise, that the system will handle at least the minimum ventilation rate required for safety when they are set in their maximum throttling position. (6). Explosion panels: (a) Every oven or drier having an internal total space of not less than half cubic metre shall be provided with suitably designed explosion panels so as to allow release of the pressure of any possible explosion within the oven or drier through explosion vents. The area of openings to be provided by means of such vents togetherwith the area of openings of any access doors which are provided with suitable arrangements for their release in case of an explosion, shall be not less than 2200 cm² for every one m³ of volume of the oven, or drier. The design of the explosion panels and doors as above said shall be such as to secure their complete release under an internal pressure of 0·25 Kg/cm². (b) The explosion releasing panels shall, as far as practicable, be situated at the roof of the oven or drier or at those portions of the walls where persons do not remain in connection with operation of the oven or drier. (7) Interlocking arrangements: (a) In each oven or drier efficient inter-locking arrangements shall be provided and maintained to ensure that— (i) all ventilating fans and circulation fans whose failure would adversely effect the ventilation rate or flow pattern, are in operation before any mechanical conveyor that may be provided for feeding the articles or substances to be processed in the oven or drier is put into operation.; (ii) failure of any of the ventilating or circulation fans will automatically stop any conveyor as referred to in clause (i) as may be provided, as well as stop the fuel supply by closing the shut off valve and shut off the ignition in the case of gas or oil-fired ovens, and in the case of electrically heated ovens switch off the electrical supply to the heaters; (iii) the above said mechanical conveyor is set in operation before the above said shut off valve can be energized;and (iv) the failure of the above said conveyor will automatically close the above said shut off valve in the case of ovens and driers heated by gas, oil or steam and deactivate the ignition system, or cut-off electrical heaters in the case of electrically heated ovens or furnaces. (8) Automatic pre-ventilation: Every oven or drier heated by oil, gas, steam or electrically shall be provided with an efficient arrangement for automatic pre-ventilation consisting of at least 3 volume changes with fresh air by operation of the safety ventilation fans and the circulating fans (if used) so as to effect purging of the oven or drier of any mixture of air and a flammable substance before the heating system can be activated and before the conveyor can be placed in position. (9) Temperature control: Every oven or drier shall be provided with an automatic arrangement to ensure that the temperature within does not exceed a safe upper present limit to be decided in respect of the particular processing being carried on. (10) Multistage processes: Wherever materials are to be processed in ovens or driers in successive operations, suitable arrangement should be provided to ensure that the operating temperatures necessary for safe operations at each stage are maintained within the design limits. (11) Combustible substances not to drip on electrical heaters or burners flame: Effective arrangements shall be provided in every oven or drier to prevent dripping of mcombustible substances on electric heaters or burner flame used for heating.
![Page 50: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/50.jpg)
50(12) Periodical examination, testing and maintenance: (a) All parts of every oven and drier shall be properly maintained and thoroughly examined and the various controls as mentioned in this rule and the working of the oven or drier tested at frequent intervals to ensure its safe operation by a responsible person designated by the Occupier or Manager, who by his experience or knowledge of necessary precautions against risks of explosion, is fit to undertake such work. (b) A Register shall be maintained in which the details of the various tests carried out from time to time under clause (a) shall be entered and every entry made shall be signed by the person making the tests. (13) Training of operators: No person shall be assigned any task connected with operation of any oven or drier unless he has completed 18 years of age and he is properly trained. (14) Polymerising machine: (a) Printed fabric shall be thoroughly dried by passing them over drying cans or through hot flue or other equally effective means, before the same is allowed to pass through polymerising machines. (b) Infra-red ray heaters of Polymerising machines shall be cut off while running the prints. 77. Shipbuilding and ship-repairing: (!) Application: This rule shall apply as respects work carried out in any of the operations defined in Sub-rule (2). (2) Definitions: In this rule unless there are anything repugnant in the subject or context— (a) "Certificate of entry" means a certificate which is given by a person who is a competent analyst and who is competent to give such certificate, and certifies that he has in an adequate and suitable manner tested the atmosphere in the oil-tank or oil-tanks specified in the certificate and found that having regard to all the circumstances of the case including the likelyhood or otherwise of the atmosphere being or becoming dangerous, entry to the oil-tanks without wearing breathing apparatus may in his opinion be permitted; (b) "Hot work" means any work which involves—(i) welding, burning, soldering,brazing, sand blasting or chipping by spark-producing tools; (ii) use of non-flameproof electrical equipment or equipment with internal combustion engines; and includes any other work which is likely to produce sufficient heat capable of igniting flammable gases or vapours; (c) "Naked light certificate" means a certificate which is given by a person who is a competent analyst and who is competent to give such certificates, and certifies that he has in an adequate and suitable manner tested for the presence of flammable vapour the oil-tank compartment, space or other part of the vessel specified in the certificate and found it to be free therefrom and that having regard to all the circumstances of the case, including the likelihood or otherwise of the atmosphere becoming flammable, the use of naked lights, fires, lamps or heated rivets or any hot work to be carried out may in his opinion be permitted in the oil- tank, compartment,space or other part of the vessel specified in the certificates; (d) "Oil" means any liquid which has a flash point below 132°C and also includes lubricating oil, liquid methane, liquid butane and liquid propane; Explanation: Flash point wherever it occurs in this rule shall be flash point as determined by Abel Closed cup or Pensky Closed Cup procedures as described in I.S. 1448—1960. (e) "Oil tank" means any tank or compartment in which oil is or has been carried; (f) "The operation" means— (i) construction, reconstruction or breaking up of any ship or vessel, repairing, refitting , painting and finishing; (ii) the scaling, scurfing or cleaning of its boilers (including combustion chambers or smoke boxes); and (iii) the cleaning of its bilges or oil-fuel tanks or any of its tanks last used for carrying oil. For the purpose of this definition the expression 'oil' means oil of any description whether or not oil within the meaning of foregoing definition of that expression; (g) "Ship and vessel" have the same meanings as in the Merchant Shipping Act,1958 ; (h) "Shipyard" means any yard or dry dock (including the precincts thereof) in which ships or vessels are constructed, reconstructed repaired , refitted or finished; (i) "Stage" means any temporary platform on or from which persons employed perform work in connection with operations, but does not include a boat-swain's chair; (j) "Staging" includes any stage, and any upright, thwart,thwart pin, wedge, distance piece, belt or other appliance or material not being part of the structure of the vessel, which is used in connection with the support of any stage, and any guard-rails connected with a stage; and (k) "Tanker" means a vessel constructed or adopted for carrying a cargo of oil in bulk. Access and staging (3) General access to vessels in a shipyard: All main gangways giving general access to a vessel in a shipyard, whether from the ground or from a wharf or quay, and all cross gangways leading from such a main gangway on to the vessel, shall— (a) be at least 60 cm wide; (b) be securely protected on each side to a height of at least 90 cm by strongly constructed upper and lower hand rails and by a secure toe-board projecting at least 15 cm above the
![Page 51: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/51.jpg)
51floor; (c) be of good construction, sound material and adequate strength; (d) be stable and, wherever practicable, of permanent construction; (e) be kept in position as long as required; and (f) maintained in good repair. (4) Access to dry dock: (a) Every flight of steps giving access from ground level either to an altar or to the bottom of a dry dock shall be provided throughout on each side with a substantial hand-rail. In the case of an open side, secure fencing to a height of at least 90 cm shall be provided by means of upper and lower rails, taut ropes or chains or by other equally safe means. For the purposes of this clause a flight of steps which is divided into two by a chute for materials, with no space between either side of the chute and the steps, shall be deemed to be one flight of steps. (b) Such hand rails and fencings as aforesaid shall be kept in position save when and to the extent to which their absence is necessary (whether or not for the purposes of the operations) for the access of persons, or for the movement of materials or vessels or for traffic or working, or for repair; but hand rails or fencing removed for any of these purposes shall be kept readily available and shall be replaced as soon as practicable. (5) Access to vessel in dry dock: (a) If a ship is lying in a dry dock for the purpose of undergoing any of the operations, there shall be provided as means of access for the use of workers at such times as they have to pass to, or from, the ship or dry dock— (i) where reasonably practicable one or more ship's accommodation ladders; or (ii) one or more soundly constructed gangways or similar constructions. (b) The means so provided shall be not less than 55 cm wide properly secured and fenced throughout on each side to a clear height of 90 cm by means of upper and lower rails, taut ropes or chains or by any other safe means, except that in the case of the ship's accommodation ladders, such fencing shall be necessary on the one side only provided where the other side is properly protected by the ship's side. (c) Where at any dry dock, there is a gangway giving access from an altar of the dock to a vessel which is in the dock for the purpose of undergoing any of the operations, and the edge of the altar is unfenced, adequate hand-holds shall be available for any length of the altar which workers commonly use when passing between the gangway and the nearest flight of steps which gives access to ground level. (6) Access to and from bulwalks: Where there is a gangway leading on to a bulwalk of a vessel there shall be provided— (a) wherever practicable, a platform at the in-board end of the gangway with safe means of access therefrom to the dock; or (b) where such a platform is not practicable, a second gangway or stairway leading from a bulwalk on to the dock which are, either attached to the first mentioned gangway or placed contiguous to it, in which case means of access, securely protected by fencing, shall be provided from the one to the other. (7) Access to staging, etc.: (a) Where outside staging is erected in a shipyard, there shall be provided sufficient ladders giving direct access to the stages having regard to the extent of the staging and to the work to be done. (b) Where vessel is under construction or reconstruction and workers are liable to go forward or after or towards the ship, across or along uncovered deck-beams, or across or along floors, sufficient planks shall be provided on these deck-beams or on these flors for the purpose of access to and from places of work, and sufficient and suitable portable ladders shall be provide so as to give access either from the ground or outer bottom plating to the top of the floor. (c) Without prejudice to any other provision in this rule requiring a greater width, no footway or passageway constructed of planks shall be less than 45 cm wide. (8) Ladders: (a) Subject to clauses (b) and (c) of this sub-rule, every ladder which affords a means of access, communication or support to a person shall— (i) be soundly constructed and properly maintained, and (ii) be of adequate strength for the purpose for which it is used, and (iii) be securely fixed either— (aa) as near its upper resting place as possible, or (bb) where this is impracticable at its base or where such fixing is impracticable a person shall be stationed at the base of ladder when in use to prevent it from slipping, and (iv) unless there is other adequate hand-hold, extend to a height of at least 75 cm above the place of landing or the highest rung to be reached by the foot of any person working on the ladder, as the case may be, or, if this is impracticable, to the greatest practicable height. (b) Requirements (iii) and (iv) of the preceding clause of this sub-rule shall not apply to fixed ladder of a ship or to rope ladders. Effective measures by means of roping off or other similar means shall be taken to prevent the use of fixed ladders of a ship which do not comply with requirements (i) and (ii) of the clause. (c) Any worker who removes any ladder and sets it up in a new position shall, as regards that ladder, comply with requirement (iii) of clause (a) of this sub-rule. (d) Rope ladders shall provide foot-hold of a depth including any space behind the ladder of not less than 12 cm and, so far as is reasonably practicable, suitable provision shall be made for preventing such ladders from twisting. (9) Lashing of ladders: (a) A fibre rope or a rope made with strands consisting of wire cores covered with fibre shall not be used to secure a ladder used for the purpose of the operations. (b) A wire rope shall not be used to secure any such ladder unless its ends are ferruled, but this provision shall not apply in the case of an end which is so situated or protected that a person using the ladder is not liable to come into contact with it so as to suffer injury.
![Page 52: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/52.jpg)
52(10) Material for staging: (a) A sufficient supply of sound and substantial material and appliances shall be avilable in convenient place or places for the construction of staging. (b) All planks and other materials and appliances intended to be used or re-used for staging shall be carefully examined before being taken into use or re-use in any staging. Every examination required by this clause shall be carried out by a person competent for this purpose. (11) Staging, dry dock altars and shoring sills: (a) All staging and every part thereof shall be of good construction, of suitable and sound material and of adequate strength for the purpose for which it is used and shall be properly maintained and every up-right and thwart shall be kept so fixed, secured or placed in position as to prevent, so far as is reasonably practicable, accidental displacement. (b) All planks forming stages shall be securely fastened to prevent them from slipping unless they extend 45 cm or more beyond the inside edge of the thwart or support on which they rest. (c) All staging used in connectionwith the operations shall be inspected before use, and thereafter at regular and frequent intervals, by a responsible person. (d) All dry dock altars and shoring sills on or from which persons perform work in connection with the operations shall be of sound construction and properly maintained. (e) All parts of stages, all parts of footways or passageways constructed of planks, and all parts of dry dock altars or shoring sills, being parts on or from which persons perform work in connection with the operations, shall so far as is reasonably practicable, be kept clear of all substances likely to make foot-hold or hand-hold insecure. (12) Upright used for hoisting block: (a) If any upright forming parts of staging is used as a fixing for a pulley block for hoisting materials— (i) it shall be properly housed in the ground or shall otherwise be adequately secured so as to prevent it from rising; and (ii) it shall be suitably protected against damage by the action of the chain or wire or other means of securing the pulley block to the upright. (b) No upright forming part of staging shall be used as an anchorage for a load pulley block, unless the upright is not likely to be displaced by such use. (13) Support of stages on planks: Planks supported on the rungs of ladders shall not be used to support stages. (14) Suspended stages: (a) Stages suspended by ropes or chains shall be secured as far as possible so as to prevent them from swinging. (b) A fibre rope or rope made of strands consisting of wire cores covered with fibre, shall not be used for suspending a stage except that fibre ropes may be used in the case of a stage of which the suspension ropes are reeved through blocks. (c) Chains, ropes, blocks and other gear used for the suspension of stages shall be of sound material, adequate strength and suitable quality, and in good condition. (d) Appropriate steps shall be taken to prevent ropes or chains used for supporting a stage from coming into contact with sharp edges of any part of a vessel. (15) Boatswain's chair: (a) Boatswain's chairs and chains,ropes or other gear used for their suspension shall be of sound material, adequate strength and suitable quality and the chains, ropes or other gear shall be securely attached. (b) Suitable measures shall be taken to prevent where possible the spinning of a boatswain's chair, to prevent the tipping of a boatswain's chair and to prevent any occupant falling therefrom. (16) Rising stage: All planks forming a rising stage at the bow and of a vessel shall be securely fastened to prevent them from slipping. (17) Width of staging : Without prejudice to the other provisions of these sub-rules, all stages shall be of sufficient width as is reasonable in all the circumstances of the case to secure the safety of the persons working thereon. (18) Stages from which a person is liable to fall more than 2 metres or into water : (a) This sub-rule applies to stages from which a person is liable to fall a distance of more than 2 metres or into water in which there is a risk of drowning. (b) Every stage to which this sub-rule applies— (i) shall so far as is reasonably practicable be closely boarded, planked or plated; (ii) shall be so constructed or placed that a person is not liable to fall as aforesaid through a gap in the staging not being a gap necessary and no larger than necessary having regard to the nature of the work being carried on; and (iii) shall be at least 45 cm wide. (c) Every side of a stage to which this sub-rule applies shall— (i) if it is not a side immediately adjacent to any part of a vessel, be fenced (subject to the provisions of clause (d) to (g) of this sub-rule) with a guard rail or guard rails to a height of at least 1 metre above the stage in which rail or rails shall be so placed as to prevent so far as practicable the fall of persons from the stage or from any raised standing place on the stage; or (ii) if it is a side immediately adjacent to any part of a vessel, be placed as near as practicable to that part having regard to the nature of the work being carried on and to the nature of the structure of the vessel. (d) In the case of stages which are suspended by ropes or chains or which are used solely for painting the fencing required by sub-clause(i) of the preceding clause may be provided by means of taut guard-rope or taut guard-ropes.
![Page 53: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/53.jpg)
53 (e) No side of a stage or , as the case may be , no part of the side of a stage need be fenced in pursuance of clause (c) (i) of this sub-rule in cases where, and so long as, the nature of the work being carried on makes the fencing of that side or, as the case may be, that part impracticable. (f) Guard-rails provided in pursuance of clause (c) (i) of this sub-rule may be removed for the time and to the extent necessary for the access of persons or for the movement of materials, but guard-rails removed for either of these purposes shall be replaced as soon as practicable. (g) Where it is not reasonably practicable to comply with the provisions of clause (c) (i) of this sub-rule, workers shall be provided with suitable safety belts equipped with life lines which are secured with a minimum amount of slack to a fixed structure. Further precautions against falls of (19) Fencing of dry docks: (a) Fencing shall be provided at or near the edges persons, materials and articles of a dry dock at ground level,including edges above flights of steps and chutes for materials.The height of such fencing shall at no point be less than 1 metre. (b) Such fencing as aforesaid shall, be kept in position save when and to the extent to which its absence is necessary (where or not for the purposes of the operation) for the access of persons, or for movement of materials or vessels or for traffic or working or for repairs, but fencing removed for any of these purposes shall be kept readily available and shall be replaced as soon as practicable. (20) Protection of openings: (a) Every side or edge of an opening in a deck or tank top of a vessel being a side or edge which may be a source of danger the workers shall, except where and while the opening is securely covered or where the side or edge is protected to a height of not less than 75 cm by a coaming or other part of the vessel, be provided with fencing to a height of not less than 90 cm above the edge or side and such fencing shall be kept in position save when and to the extent to which its absence is necessary (whether or not for the purposes of the operation) for the access of persons, or for the movement of materials or for traffic or working, or for repair, but fencing removed for any of these purposes shall be kept readily available and shall be replaced as soon as practicable. (b) Clause (a) of this sub-rule shall not apply— (i) to that part of an opening in a deck or tank top which is at the head of a stairway or ladderway intented to be used while the operations are being carried on;or (ii) to parts of a deck or tank top which are intended to be plated, except such parts where the plating has necessarily to be delayed so that the opening may be used for the purpose of the operations. (21) Fall of articles from stages: Where workers are at work outside a vessel on a stage adjacent to part of the structure of the vessel and other workers are at work directly beneath that stage, the planks of the stage shall be in such a position that no article liable to cause injury to the workers can fall between the planks,and the inside plank of the stage shall be placed as near as practicable to the structure of the vessel having regard to the nature of the work being carried on. (22) Boxes for rivets etc.: (a) Boxes or other suitable receptacles for rivets, nuts,bolts and welding rods shall be provided for the use of workers. (b) It shall be the duty of the workers to use,so far as practicable, the boxes or other suitable receptacle so provided. (23) Throwing down materials and articles: (a) Subject to the provisions of clause(b) of this sub-rule,parts of staging tools and other articles and materials shall not be thrown down from a height where they are liable to cause injury to workers, but shall be properly lowered. (b) When the work to be done necessarily involves the throwing down from a height of articles or materials,conspicuous notice shall be posted to warn persons from working or passing underneath the place from which articles or materials may fall, or the work shall be done under the direct supervision of a competent person in authority. (c) No personas shall throw any articles or materials from a height except in accordance with the requirements of this sub-rule. (24) Loose articles or materials: So far as practicable,steps shall be taken to minimise the risk arising from loose articles or materials left lying about in any place from which they may fall on workers or persons passing underneath. Raising and lowering (25) Secureness of loads: (a) Loads shall be securely suspended or supported whilst being raised or lowered and all reasonable precautions shall be taken to prevent danger from slipping or displacement. (b) Where by reason of the nature or position of the operations load is liable, whilst being moved by a lifting machine or lifting tackle, to come into contact with any object so that the object may become displaced, special measures shall be adopted to prevent the danger so far as reasonably practicable. (26) Support of lifting machine and lifting tackle: Every lifting machine and all lifting tackle shall be adequately and suitably supported or suspended having regard to the purpose for which it is used. (27) Wire ropes with broken wires: No wire rope shall be used if in any length of ten diameters the total number of visible broken wires exceeds 5% of the total number of wires,or if the rope signs of excessive wear or corrosion or other serious defect.
![Page 54: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/54.jpg)
54 (28) Splices in wire ropes: A thimble or loop splice made in any wire rope shall have at least three tucks with a whole strand of the rope and two tucks with one half of the wires cut out of each strand.All tucks shall be against the lay of the rope. Provided that this sub-rule shall not operate to prevent the use of another form of splice which can be shown to be as sufficient as the form of splice specified in this sub-rule. (29) Knotted chains etc.: (a) No chain or wire rope shall be used when there is a knot tied in any part thereof. (b) No chain which is shortened or joined to another chain by means of bolts and nuts shall be used. Provided that this does not exclude the use of a chain bolted or joined to another chain by an approved and properly constructed attachment. (30) Precaution against damage to chains and ropes: Appropriate steps shall be taken to prevent,so far as practicable, the use of chains and ropes for raising or lowering in circumstances in which they are in or liable to come into contact with sharp edges of plant,materials or loads or with sharp edges of any part of the vessel on which work is being carried out. (31) Loads on lifting appliances: No load shall be left suspended from a lifting appliance other than a self-sustaining,manually operated lifting appliance unless there is a competent person in charge of the appliance while the load is so left. (32) Heavy loads: Where there is reason to believe that a load is being lifted or lowered on a lifting appliance weighs more than 20 tonnes its weight shall be ascertained by means of an accurate weighing machione or by the estimation of a person competent for the purpose, and shall be clearly marked on the load; Provided that this sub-rule shall not apply to any load lifted or lowered by a crane which has either a fixed or a derricking jib and which is fitted with an approved type of indicator in good working order which— (a) indicates clearly to the driver or person operating the crane when the load being carried approaches the safe working load of the crane for the radius of the jib at which the load is carried ;and (b) gives an efficient sound signal when the load moved is in excess of the safe working load of the crane at that radius. Precautions against asphyxiation , injurious fumes or explosions (33) Certification for entry into confined spaces likely to contain dangerous fumes: A space shall not be certified under Section 36(3) (a) of the Act, unless— (a) effective steps have been taken to prevent any ingress of dangerous fumes; (b) any sludge or other deposit liable to give off dangerous fumes has been removed and the space contains no other material liable to give off dangerous fumes; and (c) the space has been adequately ventilated and tested for dangerous fumes and has a supply of air adequate for respiration. Provided that no account shall be taken for the purposes of clause (b) of this sub-rule of any deposit, or other material liable to give off dangerous fumes in insignificant quantities only. (34) Precautions agaainst shortage of oxygen No person shall enter or remain in any confined space in a vessel being a confined space in which there is reason to apprehend that the proportion of oxygen in the air is so low as to involve risk of persons being overcome,unless either— (a) the space has been and remains adequately ventilated and a responsible person has tested it and certified that it is safe for entry without breathing apparatus; or (b) he is wearing suitable breathing apparatus and a safety belt securely attached to a rope,the free end of which is held by a person standing outside the confined space. (35) Rivet fires: (a) Rivet fires shall not be taken into or used in or remain in any confined space on board or in a vessel unless there is adequate ventilation to prevent the accumulation of fumes. (b) No person employed shall move a rivet fire into any confined space on board or in a vessel unless he has been authorised by his employer to move the fire into that space. (36) Gas cylinders and acetylene generators— (a): No cylinder which contains or has contained oxygen or any flammable gas or vapour at a pressure above atmospheric pressure and no acetylene generating plant shall be installed or placed within 5 metres of any substantial source of heat (including any boiler or furnace when alight) other than the burner or blow-pipe operated from the cylinder or plant. (b) No such cylinder and no such plant shall be taken below the weather deck in the case of a vessel undergoing repair, or below the topmost completed deck in the case of a vessel under construction, unless it is installed or placed in a part of the vessel which is adequately ventilated to prevent any dangerous concentration of gas or fumes. (37) Further provisions as to acetylene generators: (a) The following provisions shall be observed as respect any acetylene generating plant— (i) No such plant shall be installed or placed in any confined space unless effective and suitable provision is made for securing and maintaining the adequate ventilation of that space so as to prevent, so far as practicable, any dangerous accumulation of gas; (ii) any person attending or operating any such plant shall have been fully instructed in its working and a copy of the maker's instructions for that type of plant shall be constantly available for his use; (iii) the charging andcleaning of such plant shall so far as practicable be done during daylight ; and (iv) partly spent calcium carbide shall not be re-charged into an acetylene generator. (b) No person shall smoke or strike a light or take a naked light or a lamp in or into any acetylene generator house or shed or in or into dangerous proximity to any acetylene generating plant in the open air or on board a vessel;
![Page 55: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/55.jpg)
55 Provided that the clause shall not apply ass respects a generator in the open air or on board a vessel which, since it was last charged has been thoroughly cleaned and freed from any calcium carbide and acetylene gas. (c) A prominent notice prohibiting smoking naked lights and lamps shall be exhibited on or near every acetylene generating plant whilst it is charged or is being charged or is being cleaned. (38) Construction of plant for cutting,welding or heating metal: (a) Pipes or hoses for the supply of oxygen or any flammable gas or vapour to any apparatus for cutting,welding or heating metal shall be of good construction and sound material and be properly maintained. (b) Such pipes or hoses shall be securely attached to the apparatus and other connections by means of suitable clips or other equally effective appliances. (c) Efficient rducing and regulating valves for reducing the pressure of the gases shall be provided and maintained in connection with all cylinders containing oxygen or any flammable gas or vapour at a pressure above atmospheric while the gases or vapours from such cylinders are being used in any process of cutting,welding or heating metal. (d) Where acetylene gas is used for cutting,welding or heating metal (i) a properly constructed and efficient back-pressure valve and flame arrester shall be provided and maintained in the acetylene supply pipe between each burner or blow-pipe and the acetylene generator,cylinder or container from which it is suplied, and shall be placed as near as practicable to the burner or blow-pipe,except that these requirements shall not apply where an acetylene cylinder serves only one burner or blow-pipe; and (ii) any hydraulic valve provided in pursuance of the preceding sub-clause shall be inspected on each day by every person who uses the burner or blow-pipe on that day and it shall be the duty of every worker who used the burner or blow-pipe to inspect the hydraulic valve accrdingly. (e) The operating valves of burners of blow-pipes to which oxygen or any flammable gas or vapour is supplied for the purpose of cutting,welding or heating metal shall be so constructed, or the operating mechanism shall be so protected that the valves cannot be opened accidentally. (39) Precautions after use of apparatus for cutting,welding or heating metal: (a) In the case of apparatus on board a vessel and used for cutting,welding or heating metal with the aid of oxygen or any flammable gas or vapour supplied at a pressure above atmospheric pressure the prtecautions specified in the following clauses of this sub-rule shall be taken when such use ceases for the day or for a substantial period and the appararus is to be left on board,but need not be taken when such use is discontinued merely during short interruptions of work.The requirements in clauses(c) and (d) of this sub-rule shall not apply during a meal interval,provided that a responsible person is placed in charge of the plant and equipment refferred to therein. (b) Supply valves of cylinders,generators and gas mains shall be securely closed and the valve key shall be kept in the custody of a responsible person. (c) Movable pipes or hoses used for conveying oxygen or flammable gas or vapour and the welding and cutting torches shall, in the case of a vessel undergoing construction,be brought to the topmost completed deck, or in the case of a vessel undergoing repair, to a weather deck or in either case to some other place of safety which is adequately ventilated to prevent any dangerous concentration of gas or fumes; Provided that where, owing to the nature of the work, it is impracticable to comply with the foregoing requirements of this clause the pipes or hoses shall be disconnected from cylinders,generators or gas mains, as the case may be. (d) When cylinders or acetylene generating plant have been taken below deck as permitted by clause(b) of sub-rule (36) such cylinders or acetylene generating plant shall be brought to a weather deck or,in the case of a vessel undergoing construction,to the topmost completed deck (40) Naked lights and hot work oil-carrying vessels: (a) Subject to the provisions of clause (b) of this sub-
rule and to the provisions of sub-rule (48), and without prjudice to the provisions of sub-rules (46) and (47), no naked light,fire or lamp (other than safety lamp of a type approved for the purpose of this sub-rule)— (i) shall be permitted to be applied to,or to be in, or any hot work permitted to be carried out in any part of a tanker unless,since oil was last carried in that tanker, a naked light certificate has been obtained and is in force in respect of those parts of the tanker for which in the opinion of competent analyst, a naked light certificate is necessary; Provided that a naked light,fire or lamp of a kind specified in writing by a competent analyst may be applied to or be in, or any hot work of a type specified by him carried on, any part of the tanker so specified;
(ii) shall be permitted— (aa) to be in any oil tank on board or in a vessel in which oil tank the oil last carried was oil having a flash point of not less than 23°C or was liquid methane,liquid propane or liquid butane,nor any hot work permitted to be carried out in any such oil tank or vessel,unless a naked light certificate has previously been obtained on the same day and is in force in respect of that oil tank and of any oil tank,compartment or space adjacent thereto; (bb) to be applied to the outer surface of any oil tank on board or in a vessel in which oil tank the oil last carried was such oil as aforesaid nor any work of such a nature which is likely to produce sufficient heat capable of igniting flammable gases or vapours permitted to be carried out on the outer surface of such oil tank or vessel, unless a naked light certificate has previously been obtained on the same day and is in force in respect of that oil tank; (cc) to be appled to the outer surface of, or to be in, any compartment or space adjacent to an oil tank on board or in a vessel in which oil-tank the oil last carried was such oil as aforesaid, nor any hot work permitted to be carried out in such compartment or space as aforesaid, nor any work of such nature which is likely to produce sufficient
![Page 56: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/56.jpg)
56capable of lightng flammable gases or vapours,permitted to be carried out on the outer surface of such compartment or space,unless a naked light certificate has previously been obtained on the same day and is in force in tespect of that compartment or space; Provided that where in any such case referred to in paragraph (aa), (bb) or (cc) of this sub-clause a competent analyst has certified that daily naked light certificates are unnecessary or are necessary only to a specified extent,such a daily certificate need not be obtained or,as the case may be,need only be obtained to the specified extent; (iii) shall be permitted to be applied to the outer surface of, or to be in, any oil tank on board or in a vessel nor any hot work permitted to be carried out in any such oil tank or vessel, nor any work of such nature which is likely to produce sufficient heat capable of igniting flammable gases or vapours,permitted to be carried out on the outer surface of the oil tank or vessel,unless,since oil was last carried in that oil tank, naked light certificate has been obtained and is in force in respect of that oil tank; (iv) shall be permitted to be applied to the outer surface of,or to be in, any compartment or space adjacent to an oil tank on board or in a vessel nor any hot work permitted to be carried out in any such compartment or space,nor any work of such nature which is likely to produce sufficient heat capable of igniting flammable gases or vapours, permitted to be carried out on the outer surface of any such compartment or space,unless, since oil was last carried as cargo in that oil tank, a naked light cetificate has been obtained and is in force in respect of that compartment or space. (b) Notwithstanding anything in clause (a) of this sub-rule, heated rivets may be permitted in any place without naked light certificate being in force in respect of that place if expressly so authorised by a competent analyst who certifies that after adequate and suitable testing he is satisfied having regard to all the circumstances of the case, including the likelyhood or otherwise of the atmosphere becoming flammable, that the place is sufficiently free from flammable vapour; but such heated rivets shall, where practicable, be passed through tubes. (c) No person shall introduce, have or apply naked light,fire or lamp (other than safety lamp of a type approved for the purpose of this sub-rule) into, in or to any place where they are prohibited by this sub-rule. (d) No person shall carry out hot work or any work of such nature which is likely to produce sufficient heat capable of igniting flammable gases or vapours, in any place or any surface where they are prohibited by this sub-rule. (e) In this sub-rule the expression 'competent analyst' means an analyst who is competent to give a naked light certificate. (41) Entering oil-tanks : (a) No persons (other than an analyst enering with a view to issuing a certificate of entry) shall, unless he is wearing a breathing apparatus of a type approved for the purpose of this sub-rule, enter or remain in an oil-tank on board or in a vessel unless, since the oil tank last contained oil, a certificate of entry has been obtained and is in force in respect of the tank. (b) Without prejudice to clause (a) of this sub-rule, no person (other than an analyst entering as aforesaid) shall be allowed or required to enter or remain in an oil tank on board or in a vessel in which oil tank the oil last carried was oil having a flash point of less than 23°C unless, since the oil tank last contained oil, an analyst has certified that the atmosphere is sufficiently free from flammable mixture. (c) The provisions of this sub-rule are without prejudice to the requirements of sub-rule (34). (42) Duration of certificates: Any naked light certificate or certificate of entry may be issued subject to a condition that it shall not remain in force after a time specified in that certificate. (43) Posting certificates: Every occupier for whom a naked light certificate or certificate of entry is obtained shall ensure that the certificate or a duplicate thereof is posted as soon as may be and remains pasted in a position where it may be conveniently read by all persons concerned. (44) Maintaining safe atmosphere: (a) When conditions in an oil tank in respect of which a naked light certificate has been issued are such that there is a possibility of oil vapour being released from residues or other sources, test shall be carried out by a competent analyst at such intervals as may be required so as to ensure that the conditions in the tank are maintained safe. (b) Whenever hot work is carried on or a naked light, fire or lamp is allowed to be, on the weather deck over spaces, in respect of which a naked light certificate has not been issued, all covers of manholes and openings on deck and all valves (except those wich are connected to high vent pipes) connecting the weather deck with the said spaces, shall be closed. (c) A record of all the tests carried out for the purposes of sub-rule (34), (40) and (41) shall be maintained in a register which should furnish the date, time, location and results of the tests. (45) Cleaning of oil tanks:(a) Subject to the provision of sub-rule(48), before a test for flammable vapour is carried out with a view to the issue of a naked light certificate for the purposes of sub-rule(40) in respect of an oil tank on board or in a vessel, that oil tank shall, since oil was last introduced into the tank, be cleaned and ventilated in accordance with clause (b) of this sub-rule. (b) The said cleaning and ventilation shall be carried out by the following methods— (i) the oil tank shall be treated in such manner and for such period as will ensure the vaporisation of all volatile oil; (ii) all residual oil and any sludge or other deposit in the oil tank shall be removed therefrom; and
![Page 57: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/57.jpg)
57 (iii) after the oil tank has been so cleaned— (aa) all covers of manholes and other openings therein shall be removed and it shall be thoroughly ventilated by mechanical or other efficient means with a view to the removal of all oil vapour; and then (bb) the interior surfaces, if any deposit remains thereon shall be washed or scraped down. (46) Invalidation of certificates: (a) If during the course of work in, or to the outer surfaceof, any part of a tanker or aircraft carrier, any pipe or tank joint is opened or broken or any other event occurs so that there is a risk of oil vapour entering or arising in that part of the tanker or air craft carrier, that work shall be suspended and thereafter any certificate of entry previously issued in respect of any oil tank in that part and any naked light certificate previously issued in respect of that part shall be no longer in force (b) If (in the case of a vessel other than a tanker or aircraft carrier) during the course of work in any oil tank or in any compartment or space adjacent thereto, any pipe or tank joint is opened or broken or any other event occurs so that there is a risk of oil vapour entering or arising in the oil tank or in any compartment or space adjacent thereto that work shall be suspended and thereafter any certificate of entry previously issued in respect of the oil tank and any naked light certificate previously issued in respect of the oil tank or any compartment or space adjacent thereto shall be no longer in force. (47) Provisions as to work in other compartments or space: (a) Without prejudice to the other provisions of this rule, if the presence of oil in such quantity and in such position as to be likely to give rise to fire or explosion is detected in any part of a vessel, being a part to which this sub-rule applies and in which repairs of the following kind are to be or are being undertaken that is to say, repairs involving the use of a naked light, fire or lamp (other than a safety lamp of a type approved for the purpose of sub-rule (40), or involving hot work, such repairs shall not be started or continued until a naked light certificate has been issued or, as the case may be, re-issued in respect of that part of the vessel. (b) This sub-rule shall apply to bilges, shaft tunnels, pump rooms and to compartment and space other than those to which clause (a)(iv) of sub-rule (40) applies. (48) Exemptions: If the Chief Inspector is satisfied,,by reasons of the nature of the work and the circumstances in which it is carried out, that any provisions of sub-rule(33) to (45) or part thereof can be suspended or relaxed without danger to the health or safety of any person, he may grant suspension or relaxation in writing specifying such conditions as he may consider fit. Any such suspension or relaxation may be revoked at any time. Precautions in the use of electrical energy (49) Earthing: Electrical energy other than that generated by an independent generating unit on board shall not be taken for use, or used in, or in connectionwith any of the operations unless the body of the ship is securely earthed in such a manner as to ensure an immediate and safe discharge of energy to the earth. Aship or vessel shall not be considered as securely earthed for the purposes of this sub-rule only on account of it being partly submerged in water. (50) Arc welding: (a) Electric arc welding shall not be carried on in connection with any of the operations unless separate and fully insulated welding return conductor or conductors, as the case may be, of adequate electrical capacity are provided for return of the current to the transformer or generator of the welding set. (b) The retrurn end of source of the welding current shall not be earthed. (c) All work on which welding is carried on shall be securely earthed independently to an earth electrode by means of conductor or conductors as the case may be, of adequate capacity, unless all such work are connected to any structure of the ship or vessel in such a manner as to ensure adequate connection to earth as aforesaid. (51) Cutting off energy in certain cases: Electrical energy shall be cut off from all portable electric tools and manual electrode holders within any tank, compartment or space referred to in sub-rule (34) and (40) or in any other confined space during all times when such tools or holders are not in operation; Provided that for determining whether any such portable electric tool or electric holder is not in operation, no account shall be taken of brief interruptions of work occuring during normal working; Provided further that energy may not be cut off from any such equipment if a responsible person is left in charge of it in such tank, compartment or space concerned; Provided further that cutting off all electrical energy by operation of any switch or control provided on the portable tool or electrodes holder itself should not be taken as fulfilling the requirement of this sub-rule. Miscellaneous safety provisions (52) Lighting: All parts of a vessel and all other places where operations are being carried on, and all approaches to such parts and to places to which a worker may be required to proceed in the course of his employment shall be sufficiently and suitably lighted. In providing such lighting, due regard shall be given to avoidance of glare and formation of shadows, to the safety of the vessel and cargo, of the navigation of other vessels; and to the local statutory requirements as to the lighting of harbour or dock. (53) Work in boilers etc.: (a) No work shall be permitted in any boiler, boiler furnace or boiler flue until it has been sufficiently cooled to make the work safe for the workers.
![Page 58: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/58.jpg)
58 (b) Before any worker enters any steam boiler which is one of a range of two or more steam boilers— (i) all inlets through which steam or hot water might otherwise enter the boiler from any other part of the range shall be disconnected from that part; or (ii) all valves or taps controlling such entry shall be closed and securely locked. (c) While workers remain in any steam boiler to which clause (b) of this sub-rule applies all such inlets as are referred to in that clause shall remain disconnected or all such valves or taps as are therein referred to shall remain closed and securely locked. (d) No worker shall be allowed or required to enter or remain in, and no person shall enter or remain, in any steam boiler to which clause (b) of this sub-rule applies unless the provisions of that clause are being complied with. (54) Hatch beams: The hatch beams of any hatch in use for the operations shall, if not moved, be adequately secured to prevent their displacement. (55) Jumped-up bolts: Bolts which have been jumped-up and re-screwed shall not be used for securing plates on the sides of vessels, and no worker shall use such bolts for this purpose. (56) Work in or on life boats: (a) Before workers are permitted to work in or on any life boat, either stowed or in suspended position, precautions shall be taken to prevent the boat from falling due to accidental tripping of the releasing gear or movements of the davits, and capsizing of the boat if in docks. (b) Workers shall not be permitted to remain in life boats while the life boats are being hoisted into final stowed position. Protective wear (57) Hand protection: Adequate protection for the hands shall be available for all workers when using, cutting or welding apparatus to which oxygen or any flammable gas or vapour is supplied at a pressure greater than atmospheric pressure or when engaged in machine caulking or machine riveting or in transporting or staking plates or in handling plates at machines. (58) Protection in connection with cutting and welding: Suitable goggles fitted with tinted eye-pieces shall be provided and maintained for all persons employed when using cutting or welding apparatus to which oxygen or any flammable gas or vapour is supplied at a pressure above atmospheric pressure. (b) There shall be provided and maintained for the use of all persons employed when engaged in the process of electric welding— (i) suitable helmets or suitable headshields or suitable handshields to protect the eye and face from hot metal and from rays likely to be injurious; and (ii) Suitable gauntlets to protect the hands and fore-arm from hot metal and from rays likely to be injurious. (c) When electric welding is in progress at any place and persons other than those engaged in that process are employed in a position where the rays are likely to be injurious to their eyes, screens shall, where practicable, be provided at that place for the protection of those persons. Where it is not practicable to provide effective protection of those persons by screening, suitable goggles shall be provided for their use. (59) Eye protection for other processes: Suitable goggles or effective screens shall be provided to protect the eyes of all workers in any of the following processes—(a) the cutting out or cutting off of cold rivets or bolts from boilers or other plant or from ships; (b) the chipping, scaling or scurfing of boiler or ship plates; (c) drilling by smeans of portable machine tools; and (d) dry grinding of metals. (60) Head protection: When workers are employed in areas where there is danger of falling objects they shall be provided with suitable safety helmets. (61) Safety belts and life lines: (a) Whenever any worker is engaged on work at a place in which he is liable to fall more than 5 metres, he shall be provided with safety belts equipped with life lines which are secured with a minimum of slack, to a fixed structure unless any other effective means such as provision of guard rails or ropes are taken to prevent his falling. (b) All safety belts and life lines shall be examined at frequent intervals by a Competent Person to ensure that no belt or life line which is not in good condition is used. Health and welfare (62) Prohibition of employment of young persons in certain processes: No young persons shall be employed in— (a) the application of asbestos by means of a spray; (b) the breaking down for removal of asbestos lagging; (c) the cleaning of sacks or other containers which have contained asbestos; (d) the cutting of materials containing asbestos by means of portable power driven saws; or (e) the scaling, scurfing or cleaning of boiler, combustion chambers or smoke boxes where his work exposes him to dust of such a character and to such an extent as likely to be injurious or offensive to persons employed in such work. (63) Lead processes: (a) Lead paint shall not be applied in the form of a spray in the interior painting of any part of a ship or vessel. (b) Wherever lead sheathing work is carried on for making cold storage chambers in the ships, efficient exhaust draughts with portable extractors should be provided to remove the lead fumes from the confined spaces. (64) Stretchers, ambulances and ambulance rooms etc.: (a) In every shipyard there shall be provided and kept readily available— (i) a sufficient number of suitably constructed sling stretchers or other similar appliances for raising injured person; (ii) a sufficient number of carrying or wheel stretchers; and (iii) a sufficient
![Page 59: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/59.jpg)
59supply of suitable reviving apparatus and oxygen and the stretchers, appliances and apparatus so provided shall be properly maintained. (b) In every shipyard there shall always be readily available during working hours a responsible person or responsible persons whose duty is to summon an ambulance or other means of transport if needed in cases of accident or illness. Legible copies of a notice indicating that person or,as the case may be, those persons shall be affixed in prominent positions in every shipyard. (c) Inevery shipyard other than a dry dock available for hire— (i) in which the number of persons employed normally exceeds five hundred ; or (ii) in which the number of persons employed normally exceeds one hundred and which is more than ten miles from a hospital; —there shall be provided and maintained in good order and in clean condition a properly constructed ambulance room containing at least the equipment prescribed in the rules framed under Section 45 of the Act. The room shall be used only for the purpose of treatment and rest and shall be in charge of a suitably qualified person who shall always be readily available during working hours, and record shall be kept of all cases of accident or sickness treated at the room. Training and supervision (65) Young persons: (a) No young person shall, until he has been employed in a shipyard or shipyqards for at least six months, be employed in connection with the operations in a shipyard on a stage from which, or in any part of a ship where, he is liable to fall a distance of more than 2 metres or into water in which there is a risk of drowning. (b) Any young person under the age of sixteen shall, when employed in the operations in shipyard, be placed under the charge of an experienced workman. (66) Safety supervision: In the case of every shipyard other than a dry dock available for hire, being a shipyard where the number of workers regularly or from time to time exceeds five hundred, a person experienced in the work of such yards shall be appointed and employed exclusively to exercise general supervision of the observance of these rules and to promote the safe conduct of the work generally. 78. Reaction vessels and kettles: (1) This rule applies to reaction vessels and kettles, hereinafter referred to as reaction vessels, which normally work at a pressure not above the atmospheric pressure but in which there is likelyhood of pressure being created above the atmospheric pressure due to reaction getting out of control or any other circumstances. (2) In the event of the vessel being heated by electrical means, a suitable thermostatic control device shall be provided to prevent the temperature exceeding the safe limit. (3) Where steam is used for heating purposes in a reaction vessel, it shall be supplied through a suitable pressure reducing valve or any other suitable automatic device to prevent the maximum permissible steam pressure being exceeded, unless the pressure of the steam in the supply line itself cannot exceed the said maximum permissible pressure. (4) A suitable safety valve or rupture disc of adequate size and capacity shall be provided to effectively prevent the pressure being built up in the reaction vessel beyond the safe limit. Effective arrangements shall be made to ensure that the released gases, fumes, vapours, liquids or dusts, as the case may be, are lead away and disposed off through suitable pipes without causing any hazard. Where flammable gases or vapours are likely to be vented out from the vessel the discharge end shall be provided with a flame arrestor. (5) Every reaction vessel shall be provided with a pressure gauge having the appropriate range. (6) In addition to the devices as mentioned in the foregoing provisions, means shall be provided for automatically stopping the feed into the vessel as soon as process conditions deviate from the normal limits to an extent which can be considered as dangerous. (7) Wherever necessary, an effective system for cooling, flooding or blanketing shall be provided, for the purpose of controlling the reaction and process conditions within the safe limits of temperature and pressure. (8) An automatic auditory and visual warning device shall be provided for clear warning wherever process conditions exceed the present limits. This device, wherever possible, shall be integrated with automatic process correction systems. (9) A notice pointing out the possible circumstances in which pressure above atmospheric pressure may be built up in the reaction vessel, the dangers involved and the precautions to be taken by the operators shall be displayed at a conspicuous place near the vessel Rule prescribed under 78A :Examination of eye sight of certain workers: (1) No person shall be employed Sections 41 and 112 to operate a crane, locomotive or fork-lift truck or to give signals to a crane or locomotive operators unless his eye sight and colour vision have been examined and declared fit by a qualified opthalmologist to work whether with or without the use of corrective glasses. (2) The eye sight and colour vision of the person employed as referred to in clause (1) shall be examined at least once in every period of 12 months upto the age of 45 years and once in every 6 months beyond that age.
![Page 60: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/60.jpg)
60 (3) Any fee payable for an examination of a person under this sub-rule shall be paid by the occupier and shall not be recoverable from that person. (4) The record of examination or re-examination carried out as required under sub-rule(1) shall be made in Form 38. Rules prescribed under 78B : Safety Committee : (1) In every factory— (a) Wherein 250 or more workers are Sections 41 and 41(G) ordinarily employed; or (b) Which carries on any process or operation declared to be dangerous under section 87 of the Act; or (c) Which carries on 'hazardous process' as defined under section 2 (cb) of the Act; —There shall be a safety committee. (2) The representative of the management of the safety committee shall include— (a) A senior official, who by his position in the organisation can contribute effectively to the functioning of the committee, shall be the chairman; (b) A Safety Officer and a Factory Medical Officer, wherever available and the Safety officer in such a case shall be the Secretary of the Committee; (c) A representative each from the production, maintenance and purchase departments. (3) The workers' representatives on the committee shall be elected by the workers. (4) The tenure of the committee shall be two years. (5) Safety Committee shall meet as often as necessary but at least once in every quarter. The minutes of the meeting shall be recorded and produced to the Inspector on demand. (6) Safety committee shall have the right to be adequately and suitably informed of— (a) potential safety and health hazards to which the worker may be exposed at work place; (b) data on accidents as well as data resulting from surveillance of the working environment and of the health of workers exposed to hazardous substances so far as the factory is concerned, provided that the committee undertakes to use the data on a confidential basis and solely to provide guidance and advice on measures to improve the working environment and the health and safety of the workers. (7) Functions and duties of the safety committee shall include— (a) assisting and co-operating with the management in achieving the aims and objectives outlined in the 'Health and safety policy' of the occupier; (b) dealing with all matters concerning health, safety and environment and to arrive at practicable solutions to problems encountered; (c) creating safety awareness amongst all workers; (d) undertaking educational, training and promotional activities; (e) discussing reports on safety, environmental and occupational health surveys, safety audits, risk assessment, emergency and disaster management plans and implementation of the recommendations made in the reports; (f) carrying out health and safety surveys and identifying causes of accidents; (g) looking into any complaint made on the likelyhood of an imminent danger to the safety and health of the workers and suggesting corrective measures; and (h) reviewing the implementation of the recommendations made by it. (8) Where owing to the size of the factory, or any other reason, the functions referred to in sub-rule (7) cannot be effectively carried out by the safety committee, it may establish sub-committees as may be required to assist it. 78-C: Quality of Personal protective Equipment: All personal protective equipment provided to workers as required under any of the provisions of the Act or the Rules shall have certification by Bureau of Indian Standards. 78-D: Protective Equipment: Inspector may, having regard to the nature of the hazards involved in work and process being carried out, order the occupier or the manager in writing to supply the workers exposed to particular hazard any personal protective equipment as may be found necessary. 78-E: Thermic Fluid Heaters: (1) All heaters shall be of such construction that coils are removable for periodic cleaning, visual inspection and hydraulic test. (2) Suitable arrangements shall be made for cooling the furnace effectively in case of power failure. (3) Before restarting the furnace, it shall be effectively purged. (4) Velocity of flow of thermic fluid shall not be allowed to fall below the minimum recommended by the manufacturers while the heater is in operation. (5) The thermic fluid shall be circulated in a closed circuit formation with an expansion-cum-deaerator tank. This tank shall be located outside the shed where the heater is installed. (6) Every heater shall be provided with a photo-resistor actuated audio-visual alarm to indicate flame failure and automatic burner cut-off. (7) The stack temperature monitor-cum-controller with audio-visual alarm shall be proivded so as to warn the operator in case the outlet temperature exceeds the specific minimum. (8) Where inspection doors are provided on the furnace, they shall be interlocked with the burner itself so that they cannot be opened until burner is shut off and furnace is cooled sufficiently. (9) All heaters shall also be provided with the following safety devices:— (i) level control in the expansion tank; (ii) temperature control of thermic fluid; (iii) differential pressure switch on the outlet line of the heater tubes; and (iv) temperature control device for the fuel oil supply to the burner. (10) All device mentioned in paragraph 9 shall have interlocking arrangement with burner so that in case of any predetermined limits being crossed, the supply of fuel and air to burner shall automatically be cut-off.
![Page 61: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/61.jpg)
61 (11) All safety interlocks when operated shall be indicated on the control panel of the heater by a suitable audio-visual alarm. (12) Every heater unit shall be provided as a standard accessory an arrangement for sniffing with low pressure steam or nitrogen for putting out the fire. (13) Electric panel for the heater shall be located near the heater but not so close as to be exposed to spilling or leaking oil. (14) The heater shall be located in a place partitioned off with fire-proof material from other manufacturing activities. (15) Explosion vent shall be so installed that release takes place at safe location. (16) The heater coil shall be subjected to pressure test by Competent Person once at least in every 12 months. The test pressure shall not be less than twice the operating pressure. (17) If repairs are carried out to the coil, it shall be tested before taking it into use. (18) The thermic fluid shall conform to the specifications prescribed by the manufacturers and shall be tested by Competent Person for suitability at least once in every three months period. Such test shall include test for acidity, suspended matter, ash contents, viscocity and flash point. (19) Cleaning of internal surface of the heater or soot and check up of refractory surface on the inside shall be carried out every month or as often as required depending upon working conditions. The coils shall be removed and surface of the coils cleaned thoroughly once at least in a period of six months. The burner, nozzle, oil filter and pumps shall be cleaned once a week during the period of use. (20) A separate register containing the following information shall be maintained—(i) weekly checks carried out confirming the effectiveness of the interlock; (ii) weekly checks confirming that all accessories are in good state of repairs; and (iii) information regarding fuel oil temperature, pressure, thermic fluid inlet/outlet pressure and temperature, fuel gas temperature, recorded at 4 hourly interval. (21) The heater when in operation shall always be kept in charge of a trained operator. 78-F: Site Appraisal Committee: (1) Constitution: The following provisions shall govern the functioning of the Site Appraisal Committee, hereinafter referred to as the 'Committee' in these rules:— (a) The State Government may constitute a Site Appraisal Committee and reconstitute the committee as and when necessary; (b) The State Government may appoint a senior official of the Factory Inspectorate, preferably with qualifications in Chemical Engineering to be the Secretary of the committee: (c) The State Government may appoint the following as members of the committee:— (i) A representative of the Fire Service Organisation of the State Government; (ii) A representative of the State department of Industries; (iii) A representative of the Director General Of Factory Advice Service and Labour Institutes, Mumbai. (2) No member, unless it is required to do so by a Court of Law, shall disclose otherwise than in connection with the purpose of the Act, at any time any information relating to manufacturing or commerial business or any working process which may come to his knowledge during his tenure as a member of the committee. (3) Application for appraisal of sites:— (a) Application for appraisal of sites in respect of the factories covered under Section 2(cb) of the Act shall be submitted to the Chairman of the Site Appraisal Committee; (b)The application for site appraisal alongwith 15 copies thereof shall be submitted in the Form annexed to this rule. The committee may dispense with furnishing information on any particular item in the application form if it considers the same to be not relevant to the application under consideration. (4) Functions of the committee— (a) The Secretary shall arrange to register the application received for appraisal of site in a separate register and acknowledge the same within a period of 7 days; (b) The secretary shall fix up meeting in such a manner that all the applications received and registered are referred to the committee within a period of one month from the date of their receipt; (c) The committee may adopt a procedure for its working keeping in view the need for expeditious disposal of applications; (d) The committee shall examine the application for appraisal of a site with reference to the prohibitions and restrictions on the locations of industry and carrying on of processes and operations in different areas as per the provisions of Rule 5 of the Environment (Protection) Rules, 1986 framed under the Environment Protection Act, 1986; (e) The committee may call for documents, examine experts, inspect the site if necessary and take other steps for formulating its views in regard to the suitability of the site; (f) Wherever the proposed site requires clearance by the Ministry of Environment and Forests, the application for site appraisal will be considered by the Site Appraisal Committee only after such clearance has been received. FORMAT OF APPLICATION OF THE SITE APPRAISAL COMMITTEE 1. Name and address of the applicant: 2. Site ownership data: 2.1: Revenue details of site such as Survey No.,Plot No., etc. 2.2: Whether the site is classified as forest and if so, whether approval of the Central Government under Section 5 of the Indian Forests Act,1927 has been taken.
![Page 62: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/62.jpg)
622.3: Whether the proposed site attracts the provisions of Section 3(2)(v) of the E.P.Act,1986; if so ,the nature of the restrictions: 2.4: Local authority under whose jurisdiction the site is located. 3. Site plan: 3.1: Site plan with clear identification of boundaries and total area proposed to be occupied and showing the following details nearby the proposed site: — (a) Historical monument, if any, in the vicinity; (b) Names of neighbouring manufacturing units and human habitats, educational and training institutions, petrol installations, storages of LPG and other hazardous substances in the vicinity and their distances from the proposed unit; (c) Water sources (rivers, streams,canals, dams,water filtration plants etc.) in the vicinity; (d) Nearest hospitals, fire stations, civil defence stations and police stations and their distances; (e) High tension electrical transmission lines, pipe lines for water, oil, gas or sewerage; railway lines, roads , stations; jetties and other similar installations. 3.2: Details of soil conditions and depth at which hard strata obtained: 3.3: Contour map of the area showing nearby hillocks and difference in levels: 3.4: Plot plan of the factory showing the entry and exit points, roads within; water drains etc. 4. Project report: 4.1: A summary of the salient features of the project: 4.2: Status of the organisation (Government, semi-Government, Public or Private etc.): 4.3: Maximum number of persons likely to be working in the factory: 4.4: Maximum amount of power and water requirements and source of their supply: 4.5: Block diagram of the buildings and installations in the proposed supply: 4.6: Details of housing colony, hospital, school and other infrastructural facilities proposed: 5. Organisation structure of the proposed manufacturing unit/factory: 5.1: Organisation diagram of: —(i) proposed enterprise in general; —(ii) Health, safety and environment protection departments and their linkage to operation and technical departments: 5.2: Proposed Health and Safety Policy: 5.3: Area allocated for treatment of wastes and effluent: 5.4: Percentage outlay on safety, health and environment protection measures: 6. Metrological data relating to the site: 6.1: Average, minimum and maximum of (i)Temperature: (ii) Humidity: (iii) Windvelocities; during the previous ten years: 6.2: Seasonal variations of wind direction: 6.3: Highest water level reached during the floods in the area recorded so far: 6.4: Lightning and seismic data of the area: 7. Communication links: 7.1: Availability of telephone/telex/wireless and other communication facilities for outside communication: 7.2: Internal communication facilities proposed: 8. Manufacturing process information: 8.1: Process flow diagram: 8.2: Brief write up on process and technology: 8.3: Critical process parameters such as pressure build up, temperature rise and run-away reactions: 8.4: Other external effects critical to the process having safety implications such as ingress of moisture or water, contact with incompatable substance, sudden power failure: 8.5: Highlight of the built-in safety/pollution control devices or measures incorporated in the manufacturing technology: 9. Information of hazardous materials: 9.1: Raw materials, intermediates, products and by-products and their quantities (Enclose Material Safety Data Sheet in respect of each hazardous substance): 9.2: Main and intermediate storages proposed for raw materials/intermediates/ products/ by-products (maximum quantities to be stored at any time) : 9.3: Transportation methods to be used for materials inflow and outflow, their quantities and likely routes to be followed: 9.4: Safety measures proposed for: —(i) handling for materials; —(ii) internal and external transportation; and —(iii) disposal ( packing and forwarding of finished products): 10. Information and dispersal/ Disposal of wastes and pollutants: 10.1: Major pollutants (gas, liquid, solid), their characteristics and quantities(average and at peak loads):
![Page 63: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/63.jpg)
6310.2: Quality and quantity of solid wastes generated, method of their treatment and disposal: 10.3: Air, water and soil pollution problems anticipated and the proposed measures to control the same, including treatment and disposal of effluents: 11. Process hazard information: 11.1: Enclose a copy of the report on environmental impact assessment: 11.2: Enclose a copy of the report on Risk Assessment Study: 11.3: Published (open or classified) reports, if any, on accident situations, occupational health hazards of similar plants elsewhere(within or outside the country): 12. Information of proposed safety and occupational health measures: 12.1: Details of fire fighting facilities and minimum quantities of water, CO2 and/ or other fire fighting measures needed to meet the emergencies: 12.2: Details of in-house medical facilities proposed: 13. Information on Emergency Preparedness: 13.1: Onsite emergency plan: 13.2: Proposed arrangements, if any, for mutual aid scheme with the group of neighbouring factories 14. Any other information: I certify that the information furnished above is correct to the best of my knowledge and nothing of importance has been concealed while furnishing it Name and signature of the Applicant. Rule made under Sections 78G: Health and safety policy: (1) The occupier of every factory, except as provided for 7A(3) ,41B(2) and 112 in sub-rule (2), shall prepare a written statement of his policy in respect of health and safety of wokers at work. (2) All factories:— (a) covered under Section 2(m)(i) but employing less than 50 workers; (b) covered under Section 2(m)(ii) but employing less than 100 workers; are exempted from the requirements of sub-rule(1); Provided that they are not covered under the first schedule under Section 2(cb) or carrying out processes or operations declared to be dangerous under Section 87 of the Act. (3) Notwithstanding anything containd in sub-rule(2), the Chief Inspector may require the occupier of any of the factories or class or description of factories to comply with the requirements of Sub-rule(1), if in his opinion, it is expedient to do so. (4) The health and safety policy should contain or deal with: (a) declared intention and commitment of the top management to health, safety and environment and compliance with all the relevant statutory requirements; (b) organisational set up to carry out the declared policy clearly assigning the responsibility at different levels; and (c) arrangements for making the policy effective. (5) In particular, the policy should specify the following:— (a) Arrangements for involving the workers; (b) intention of taking into account the health and safety performance of individuals at different levels while considering their career advancement; (c) fixing the responsibility of the contractors , sub-contractors, transporters and other agencies entering the premises; (d) providing a resume of health and safety performance of the factory in its annual report; (e) relevant techniques and methods, such as safety audits and risk assessment for periodical assessment of the status on health, safety and environment and taking all the remedial measures; (f) stating its intentions to integrate health and safety, in all decisions including those dealing with purchase of plant equipment, machinery and material as well as selection and placement of personnel; (g) arrangements for informing, educating and training and retraining its own employees at different levels and public, wherever required. (6) A copy of the declared health and safety policy signed by the occupier shall be made available to the Inspector having jurisdiction over the factory and to the Chief Inspector. (7) The policy shall be made widely known by— (a) making copies available to all workers including contract workers, apprentices, transport workers, suppliers etc.; (b) displaying copies of the policy at conspicuous places; and (c) any other means of communication in a language understood by majority of workers. (8) The occupier shall revise the safety policy as often as may be appropriate, but it shall necessarily be revised under the following circumstances:— (a) whenever any expansion or modification having implications on safety and health of persons at work is made; or (b) whenever new substance(s) or articles are introduced in the manufacturing process having implications on health and safety of persons exposed to such substances. Rules made under 78-H: Material Safety Data Sheet: (1) Collection, development and dissemination of Sections 41B and 112 information: The occupier of every factory carrying on a hazardous process, shall arrange to obtain or develop information in the form of Material Safety Data Sheet (MSDS) in respect of every hazardous substance or material handled in the manufacture, transportation and storage in the factory. It shall be accessible upon request to a worker for reference.
![Page 64: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/64.jpg)
64 (a) Every such MSDS shall include the following information:— (i) the identity used in the label; (ii) hazardous ingredients of the substance; (iii) physical and chemical characteristics of the hazardous substance; (iv) the physical hazards of the hazardous substance, including the potential for fire, explosion and reactivity; (v) the health hazards of the hazardous substance, including signs and sumptoms on exposure, and any medical conditions which are generally recognised as being aggravated by exposure to the substance; (vi) the primary rout(s) of entry; (vii) the permissible limits of exposure prescribed inthe Second Schedule under Section 41-F of the Act and in respect of a chemical not covered by the said Schedule, any exposure limit used or recommended by the manufacturer, importer or occuier; (viii) any generally applicable precautions for safe handling and use of the hazardous substance, which are known, including appropriate hygienic practices, protective measures during repairs and maintenance of contaminated equipment, procedures for clean-up of spills and leaks; (ix) any generally applicable control measures, such as appropriate engineering controls, work practices, or use of personal protective equipment; (x) emergency and first-aid procedures; (xi) the date of preparation of the MSDS or the last change to it; and (xii) the name, address and telephone number of the manufacturer, importer, occupier or other responsible party preparing or distributing the MSDS's who can provide additional information on the hazardous substance and appropriate emergency procedures, if necessary. (b) The occupier while obtaining or developing an MSDS in respect of hazardous substance shall ensure that the information recorded accurately reflects the scientific evidence used in making the hazard determination. If he becomes newly aware of any significant information regarding the hazards of a substance, or ways to protect against the hazards, this new information shall be added to the MSDS as soon as practicable. (c) An example of such MSDS is given in the Schedule to this Rule. (2) Labelling: Every container of a hazardous substance shall be clearly labelled or marked to identify:—(a) the contents of the container; (b) the name and address of the manufacturer or importer of the hazardous substances; (c) the physical and health hazards; and (d) the recommended personal protective equipment needed to work safely with the hazardous substance. SCHEDULE Format of a Material Safety DataSheet _____________________________________________________________________________________________ : 1. IDENTITY OF MATERIAL : Product name: Chemical Designation: Trade name: Synonyms: Formula: Label: Category- CAS number: UN number: Class- Regulated Shipping name Hazchem code: Identification: Codes/Label Hazardous waste identification number: Hazardous Ingredients CAS Number 1. ....................................................... ............................................................. 2. ........................................................ .............................................................. 3. ........................................................ .............................................................. _____________________________________________________________________________________________ : 2.PHYSICAL AND CHEMICAL PROPERTIES : Physical State:(Gas, liquid, solid): Boiling Point in Degree C: Vapour Pressure at 35°C(mm Hg): Appearance: Melting/freezing point in °C: Evaporation rate at 30°C: Odour: Vapour Density (air-1): Solubility in water at 30°C: Others(corrosivity etc.): Specific Gravity(Water-1): PH: _____________________________________________________________________________________________ : 3. FIRE AND EXPLOSION HAZARDS DATA : Explosion/Flammability: Flash point(°C): LEL%: Autoignition Temperature(◦C) Flash point(ºC) UEL%: TDG Flammability(Classification): _____________________________________________________________________________________________ : 4. REACTIVE HAZARDS : Stability Impact: (Hazardous combustion products) to Static discharge (Hazardous decomposition products) Reactivity (Conditions to avoid)
![Page 65: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/65.jpg)
65Hazardous May/May not (Conditions to avoid) Polymerisation occur Incompatibility (Materials to avoid) _____________________________________________________________________________________________ : 5. HEALTH HAZARD DATA : Routes of entry:— (Inhalation, skin, mucuos membrane, eye contact and ingestion): ........................................................................................................................................................................................... Effect of exposure/Symptoms:— LD50 (in rat) (orally or percutaneous absorption) LC 50 (in rat) (mg/L)/ 4 hours [mg/Kg body weight] ........................................................................................................................................................................................... Permissible Exposure Limit(PEL):— ppm mg/cu.m short term exposure limit (STEL): ppm mg/cu.m .......................................................................................................................................................................................... Threshold limit value(TLV) of ACGIH: ppm mg/cu.m odour thresholds: ppm mg/cu.m .......................................................................................................................................................................................... Emergency treatment: _____________________________________________________________________________________________ : 6. HAZARD SPECIFICATION : NFPA Hazard signal: Health flammability Stability Special ........................................................................................................................................................................................... -:Known Hazards: Combustible liquid Water reactive material Irritant
.......................................................................................................................................................................... Flammable material Oxidiser Sensitizer
........................................................................................................................................................................... Pyrophoric material Organic peroxide Carcinogen .......................................................................................................................................................................... Explosive material Corrosive material Mutagen .......................................................................................................................................................................... Unstable material Compressed gas Others(specify) ____________________________________________________________________________________________ : 7. SAFE USAGE DATA : Ventilation: General/Mechanical Local Exhaust ........................................................................................................................................................................................... Protective Equiopment Required: Eyes(specify) Respiratory(Specify) Gloves(specify) Clothing(specify) Others(specify) ........................................................................................................................................................................................... Precautions: Handling & storage Others(specify) _____________________________________________________________________________________________ : 8. EMERGENCY RESPONSE DATA : Fire: Fire extinguishing media Special procedures Unusual hazards ........................................................................................................................................................................................... Exposure(inhalation, skin and eye contact, ingestion): First-Aid Measures .......................................................................................................................................................................................... Spills: Steps to be taken Waste disposal method _____________________________________________________________________________________________ : 9. ADDITIONAL INFORMATION : ____________________________________________________________________________________________ : 10. SOURCES USED : Reference to books, journals etc. _____________________________________________________________________________________________ : 11. MANUFACTURER/ SUPPLIER : Firm's name Mailing address Telephone number Telex number Telegraphic address
![Page 66: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/66.jpg)
66 Contact person in emergency Standard packing Other other Emergency Tel in Transit area ____________________________________________________________________________________________ :Acronyms and glossary of terms: CAS: Chemical Abstract Service Registration Number. UN Number: United Nations Number HAZCHEM Code: Emergency Action Code(EAC), allocated by the Joint Committe of Fire Brigade Operations, UK. NFPA: National Fire Protection Association, USA. LD 50 and LC 50 represent the dose in mg/kg of body weight and the concentration in mg/L for 4 hours having lethal effect on 50% of the animals (rate) treated. PEL: Permissible exposure limit as laid down in the statutes. TLV: Threshold Limit Value as laid down by the American Conference of Governmental Industrial Hygienists (ACGIH), USA. STEL: Short Term Exposure Limit as laid down in the statutes or by the ACGIH. GUIDELINES: All efforts should be made to fill in all the columns. No column should be left blank. Incase certain information is not applicable or available, N/App. Or N/Av. Sign may be used. _____________________________________________________________________________________________ 78-I: Disclosure of information to workers: (1) The occupier of a factory carrying a 'hazardous process' shall supply to all workers the following information in relation to handling hazardous mateial or substances in the manufacture, transportation, storage and other processes:— (a) Requirements of Sections 41B, 41C and 41H of the Act; (b) A list of 'hazardous processes' carried on in the factory; (c) Location and availability of all Material Safety Data Sheets as per Rule 78H; (d) Physical and health hazards arising from the exposure to or handling of substances; (e) Measures taken by the occupier to ensure safety and control of physical and health hazards; (f) Measures to be taken by the workers to ensure safe handling, storage and transportation of hazardous substances; (g) Personal protective equipment required to be used by workers employed in 'hazardous process' or 'dangerous operations'; (h) Meaning of various labels and markings used in the containers of hazardous substances aqs provided under Rule 78H; (i) Signs and symptoms likely to be manifested on exposure to hazardous substances and to whom to report; (j) Measures to be taken by the workers in case of any spillage or leakage of a hazardous substance; (k) Rule of workers vis-a vis the emergency plan of the factory, in particular the evacuation procedures; and (l) Any other information considered necessary by the occupier to ensure safety and health of workers. (2) The information required by sub-rule(1) shall be complied and made known to workers individually through supply of booklets or leaflets and display of cautionary notices at the work places. (3) The booklets, leaflets and the cautionary notices displayed in the factory shall be in the language understood by the majority of the workers, and also explained to them. (4) The Chief Inspector may direct the occupier to supply further infomation to the workers as deemed necessary. 78-J: Disclosure of information to the Chief Inspector: (1) The occupier of every factory carrying on 'hazardous process' shall furnish in writing, to the Chief Inspector a copy of all information furnished to the workers. (2) A copy of compilation of Material Safety Data Sheet in respect of hazardous substances used, produced or stored in the factory shall be furnished to the Chief Inspector, and the local Inspector. (3) The occupier shall also furnish any other information asked for by the Chief Inspector from time to time for the purpose of this Act and Rules made thereunder. 78-K: Information on industrial wastes: (1) The information furnished under Rules 78-I and 78-J shall include the quality of the solid and liquid wastes generated per day, their characteristics and the method of treatment such as incineration of solid wastes, chemical and biological treatment of liquid wastes, and arrangements for their final disposal. (2) It shall also include information on the quality and quantity of gaseous waste discharged through the stacks or other openings, and arrangements such as provision of scrubbers, cyclone separators, electrostatic precipitators or similar such arrangements made for controlling pollution in the environment. (3) The occupier shall also furnish the information prescribed in sub-rules (1) and (2) to the State Pollution Control Board.
![Page 67: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/67.jpg)
67 78-L: Review of the information furnished to workers etc.: (1) The occupier shall review once in every calendar year and modify, if necessary, the information furnished under Rules 78-I and 78-J to the workers and the Chief Inspector. (2) In the event of any change in the process or operations or methods of work or when any new substance is introduced in the process or in the event of a serious accident taking place, the information so furnished shall be reviewed and modified to the extent necessary. 78-M: Confidentiality of information: The occupier of a factory carrying on 'hazardous process' shall disclose all information needed for protecting safety and health of the workers to— (a) his workers; and (b) Chief Inspector; as required under Rules 78-I and 78-J. If the occupier is of the opinion that the disclosure of details regarding the process and formulations will adversely affect his business interests, he may make a representation to the Chief Inspector stating the reasons for withholding such information. The Chief Inspector shall give an opportunity to the occupier of being heard and pass an order on the representation. An occupier aggrieved by the order of the Chief Inspector may prefer an appeal before the State Government within a period of 30 days. The State Government shall give an opportunity to the occupier of being heard and pass an order.The order of the State Government shall be final. Rules framed under :SPECIFIC RESPONSIBILITY OF THE OCCUPIER IN RELATION TO Sections41-B,41-C and 112 HAZARDOUS PROCESSES’: 78-N: Medical Examination: Workers employed ina 'hazardous process' shall be medically examined by a qualified medical practitioner hereinafter referred to as Factory Medical Officer, in the following manner: (a) Once before employment, to ascertain physical fitness of the person to do the particular job; (b) Once in a period of six months to ascertain the health status of all the workers in respect of occupational health hazards to which they are exposed; and in cases where in the opinion of the Factory Medical Officer it is necessary to do so at a shorter interval in respect of any workers; (c) The details of pre-employment and periodical medical examinations carried out as aforesaid shall be recorded in the Health Register in Form 24. (2) No person shall be employed for the first time without a certificate of fitness in Form 33 granted by the Factory Medical Officer. If the Factory Medical Officer declares a person unfit for being employed in any process covered under sub-rule(1), such a person shall have the right to appeal to the Inspector who shall refer the matter to the Certifying Surgeon whose opinion shall be final in this regard. If the Inspector is also a Certifying Surgeon, he may dispose off the application himself. (3) Any findings of the Factory Medical Officer revealing any abnormality or unsuitability of any person employed in the process shall immediately be reported to the Certifying Surgeon who shall in turn, examine the concerned worker and communicate his finding to the occupier within 30 days. If the Certifying Surgeon is of the opinion that the worker is required to be taken away from the process for health protection, he will direct the occupier accordingly, who shall not employ the said worker in the same process. However, the worker so taken away shall be provide with alternate placement unless he is in the opinion of the Certifying Surgeon, fully incapacitated in which case the worker affected shall be suitably rehabilitated. (4) A Certifying Surgeon on his own motion or on a reference from an Inspector may conduct medical examination of a worker to ascertain the suitability of his employment in a hazardous process or for ascertaining his health status. The opinion of the Certifying Surgeon in such a case shall be final. The fee required for this medical examination shall be paid by the occupier. (5) The worker taken away from employment in any process under sub-rule (2) may be employed again in the same process only after obtaining the fitness certificate from the Certifying Surgeon and after making entries to that effect inthe health Register. (6) The worker required to undergo medical examination under these rules and for any medical survey conducted by or on behalf of the Central or the State Government shall not refuse to undergo such medical examination. 78-O: Occupational Health Centres: (1) In respect of any factory carrying on 'hazardous process', there shall be provided and maintained in good order an Ocupational Health Centre with the services and facilities as per scale laid down hereunder:— (a) For factories employing upto 50 workers—(i) the services of a Factory Medical Officer on Retainership basis, in his clinic to be notified by the occupier. He will carry out the pre-employment and periodical medical examination as stpulated in rule 78-N and render medical assistance during any emergency; (ii) a minimum of 5 persons trained in the first-aid procedures amongst whom at least one shall always be available during the working period; (iii) a fully equipped first-aid box. (b) For factories employing 51 to 200 workers— (i) An occupational Health Centre having a room with a minimum floor area of 15 sq.m. with floors and walls made of smooth and impervious surface and with adequate illumination and ventilation as well as equiupment as per the Schedule annexed to this Rule; (ii) A Part time Factory Medical Officer shall be in overall charge of the Centre who shall visit the factory at least twice in a week
![Page 68: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/68.jpg)
68and whose service shall be readily available during medical emergencies; (iii) one qualified and trained dresser-cum-compounder on duty throughout the working period; and (iv) a fully equipped first-aid box in all the departments. (c) For factories employing above 200 workers— (i) one Full-time Factory Medical Officer for factories employing upto 500workers and one more Medical Officer for every additional 1000 workers or part thereof; (ii) an occupational Health Centre having at least 2 rooms each with a minimum floor area of 15 sq.m. with floors and walls made of smooth and impervious surface and adequate illumination and ventilation as well as equipment as per the Schedule annexed to this Rule; (iii) there shall be one nurse, one dresser-cum-compounder and one sweeper-cum-ward boy throughout the working period; (iv) the occupational Health Centre shall be suitably equipped to manage medical emergencies. (2) The factory Medical Officer required to be appointed under sub-rule(1) shall have qualifications included in Schedules to the Indian Medical Degrees Act of 1916 or in the Schedules to the Indian Medical Council Act,1956 and possesses a Certificate of Training in Industrial Health of a minimum three months duration recognised by the State Government; Provided that— (i) a person possessing a Diploma in Industrial Health or equivalent shall not be required to possess the certificate of training as aforesaid; (ii) the Chief Inspector may, subject to such conditions as he may specify, grant exemption from the requirement of this sub-rule, if in his opinion a suitable person possessing the necessary qualification is not available for appointment; (iii) in case of a person who has been working as a Factory Medical Officer for a period of not less than 3 years on the date of commencement of this rule, the Chief Inspector may, subject to the condition that the said person shall obtain the aforesaid certificate of training within a period of three years, relax the qualification. (3) The syllabus of the course leading to the above certificate, and the organisation conducting the course shall be approved by the Directorate General Of Factory Advice Service and Labour Institutes (DGFASLI) or the State Government in accordance with the guidelines issued by the DGFASLI. (4) Within one month of the appointment of a Factory Medical officer, the occupier of the factory shall furnish to the Chief Inspector the following particulars— (a) Name and address of the Factory Medical Officer; (b) Qualifications; (c) Experience, if any, and (d) The Sub-rule under which appointed. SCHEDULE Equipment for Occupational Health Centre In factories 1. Aglazed sink with hot and cold water always available. 19. One electric hand torch. 2.Atable with a smooth top at least 180cm x 105cm. 20. An adequate supply of titanus toxoid 3. Means for sterilizing instruments. 21. Caramine liquid (60 ml.) 4. A couch. 22. Tablets: antihistaminic, antispasmotic . (25 each) 5. Two buckets or containers with close fitting lids. 23. Syringes with needles: 2cc, 5cc and 10cc 6. A kettle and spirit stove or other suitable means of boiling water. 24. Two needles holders, big and small. 7. One bottle of spiritus ammoniac aromaticus (120ml) 25. Suturing needles and materials. 8. Two medium size sponges. 26. One dissecting forceps. 9. Two 'kidney’ trays. 27. One dressing forceps. 10. Four cakes of toilet, preferably antiseptic soap. 28. One scapels. 11. Two glass tumblers and two wine glasses. 29. One stethescope. 12. Two clinical thermometers. 30. Rubber bandage —pressure bandage. 13. Two tea spoons. 31. Oxygen cylinder with necessary attachments. 14. Two graduated (120ml.) measuring glasses. 32. One blood pressure apparatus. 15. One wash bottle (1000cc ) for washing eyes. 33. One Patellar Hammer. 16. One bottle (one litre ) carbolic lotion 1 in20. 34. One peak-flow meter for lung function measurement 17. Three chairs. 35. One Stomach wash set. 18. One screen. 36. Any other equipment recommended by the factory Medical Officer according to specific need relating to manufacturing process. ........................................................................................................................................................................................ 37. In addition— (1)For factories employing 51 to 200 workers: 1. Four plain wooden splints 900 mm x100 mm x 6 mm. 5. Injections:— morphia, pethadine, atropine, ardenaline,coramine, novocan (2 each)
![Page 69: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/69.jpg)
69 2. Four plain wooden splints 350 mm x 75 mm x 6 mm. 6. One surgical scissors. 3. Two plain wooden splints 250 mmx 50 mmx 12 mm. 4. One Pair artrery forceps. .......................................................................................................................................................................................... (2) For factories employing above 200 workers: 1. Eight plain wooden splints 900 mmx 100 mm x 6 mm. 5. Injecftions:—morphia, pethadine, atropine adrenaline, coramine, novacan (4 each) 2. Eight plain wooden splints 350 mmx 75 mm x 6 mm. 6. Two surgical scissors. 3. Four plain wooden splints 250 mmx 50 mm x 12 mm. 4. Two pairs artery forceps. ___________________________________________________________________________________________ 78-P: Ambulance van: (1) In any factory carrying on 'hazardous process', there shall be provided and maintained in good condition, a suitably constructed ambulance van equipped with items as per Sub-rule (2) and manned by a full-time Driver-cum-Mechanic and a Helper trained in first-aid, for the purpose of transportation of serious cases of accidents or sickness. The ambulance van shall not be used for any purpose other than the purpose stipulated herein and will normally be stationed at or near to the Occupational Health Centre; Provided that a factory employing less than 200 workers, may make arrangements for procuring such facility at short notice from nearby hospital or other places, to meet any emergency. (2) The ambulance should have the folowing equipment:— (a) General: A wheeled chair with folding and adjusting devices— with the head of the stretcher capable of being tilted upward; Fixed suction unit with equipment ; Fixed oxygen supply with equipment ; Pillow with case; Sheets; Blankets; —Towels; Emesis bag; Bad pan; Urinal pan; Glass. (b) Safety equipment: Flares with life of 30 minutes; Flood lights; Flash lights; Fire extinguisher dry powder type; Insulated gauntlets. (c) Emergency care equipment: (i) Resuscitation:— Portable suction unit; Portable oxygen units; Bag-valve-mask, hand operated artificial ventilation unit; Air ways; Mouth gags;Trachestomy adaptors; Short spine board; I.V.Fluids with administration unit; B.P.Manometer; Cugg; Stethescope; (ii) Immobilization:— Long and short padded boards; Wire ladder splints; Triangular bandage; Long and short spline boards; (iii) Dressings: Gauze pads 4" x 4"; Universal dressing 10"x 36"; Roll of aluminium foils; Soft roller bandages 6" x 5 yards ; Adhesive tape in 3" roll ; Sadety pins; Bandage sheets ; Burn sheet; (iv) Poisoning: Syrup of Ipecac; Activated charcoal prepacketed in dozes; Snake bite kit; Drinking water; (v) Emergency medicines: As per requirement ( under the advice of Medical Officer only). 78-Q: Decontamination facilities: In every factory, carrying out 'hazardous process', the following provisions shall be made to meet emergency:— (a) fully equipped first-aid box; (b) readily accessible means of water for washing by workers as well as for drenching clothing of workers who have been contaminate with hazardous and corrosive substance; and such means shall be as per the scale shown in the table below: TABLE No. of persons employed at any time. No. of drenching shower (i) Upto 50 workers 2 (ii) Between 51 to 200 workes 2+1 for every additional 50 or part thereof. (iii) Between 201 and 500 workers 5+1 for every additional 100 or part thereof. (iv) 501 workers and above 8+1 for every additional 200 or part thereof (c) a sufficient number of eye wash bottles filled with distilled water or suitable liquid, kept in boxes or cupboards conveniently situated and clearly indicated by distinctive sign which shall be visible at all times. 78-R: Making available Health Records to workers: (1) The occupier of every factory carrying out a 'hazardous process' shall make accessible the health records including the record of worker's exposure to hazardous process or, as the case may be, the medical records of any worker for his perusal under the folowing conditions:— (a) Once in every six months or immediately after the medical examination whichever is earlier; (b) If the factory Medical Officer or the Certifying Surgeon, as the case may be, is of the opinion that the worker has manifested signs and symptoms of any notifiable disease ass specified inthe Third Schedule of the Act; (c) If the worker leaves the employment; (d) If any of the following authorities so direct:— the Chief Inspector of Factories; the Health Authority of the Central or State Government; Commissioner of Workmen's Compensation; the Director General, Employees' State Insurance Corporation; the Director, Employees' State Insurance Corporation (Medical Benefits) ; and the Director General, Factory Advice Service and Labour Institutes.
![Page 70: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/70.jpg)
70 (2) A copy of the uptodate health records including the record of worker's exposure to hazardous process, or as the case may , the medical records shall be supplied to the worker on receipt of an application from him. X-ray plates and other medical diagnostic reports may also be made available for reference to his medical practitioner. 78-S: Qualifications etc. Of Supervisors: (1) All persons who are required to supervise the handling of hazardous substances shall possess the following qualifications and experience: (a) (i) A degree in Chemistry or Diploma in Chemical Engineering or Technology with 5 years experience; or (ii) A Master's Degree in Chemistry or a Degree in Chemical Engineering or Technology with 2 years experience; —The experience stipulated above shall be in process operation and maintenance in the Chemical Industry. (b) the Chief Inspector may require the Supervisor to undergo training in Health and Safety. (2) The syllabus and duration of the above training and the organisations conducting the training shall be approved by the DGFASLI or the State Government in accordance with the guidelines issued by the DGFASLI. 78-T: Issue of guidelines: For the purpose of compliance with the requirements of Sub-sections (1), (4) and (7) of Section 41-B or 41-C the Chief Inspector may, if deemed necessary, issue guidelines from time to time to the occupiers of factories carrying on 'hazardous process'. Such guidelines may be based on National Standards, Codes or Practice or recommendations of International Bodies such as ILO and WHO. ____________________________________________________________________________________________ CHAPTER V Welfare Rules prescribed under 79: Washing facilities: (1) There shall be provided and maintained in every factory Sub-section(2) of Section42 for the use of employed peersons adequate and suitable facilities for washing which shall include soap and nail brushes or other suitable means of cleaning and the facilities shall be conveniently accessible and shall be kept in a clean and orderly condition. (2) Without prejudice to the generality of the foregoing provisions, the washing facilities shall include— (a) a trough with taps or jets at intervals of not less than 60 centimetres ;or (b) wash basins with taps attached thereto; or (c) taps on stand pipes; or (d) showers controlled by taps; or (e) circular troughs of fountain type; Provided that the Inspector may, having regard to the needs and habits of the workers, fix the proportion in which the aforementioned types of facilities shall be installed. (3) (a) Every trough and basin shall have a smooth, impervious surface and shall be fitted with a waste pipe and plug; (b) The floor or ground under and in the immediate vicinity of every trough, tap, jet, wash-basin, standpipe and shower shall be so laid or finished as to provide a smooth impervious surface and shall be adequately drained. (4) For persons whose works involve contact with any injurious or noxious substance there shall be at least one tap for every fifteen persons; and for persons whose work does not involve such contact the number of taps shall be as prescribed in the Schedule annexed hereto: SCHEDULE
Number of workers Number of taps Upto 20 1 21 to 35 2 36 to 50 3 51 to 150 4 151 to 200 5 Exceeding 200 but not exceeding 500 5 +1 tap for every 50 or fraction of 50 Exceeding 500 11+ 1 tap for every 100 or fraction of 100
(5) If female workers are employed, separate washing facilities shall be provided and so enclosed or screened that the interiors are not visible from any place where persons of the other sex work or pass. The entrance of such facilities shall bear conspicuous notice " For women only" in the language understood by the majority of the workers and shall also be indicated pictorially. (6) The water supply to the washing facilities shall be capable of yielding at least 27 litres a day for each person employed in the factory and shall be from a source approved in writing by the Health Officer; Provided that where the Chief Inspector is satisfied that such a yield is not practicable he may by certificate in writing permit the supply of a smaller quantity not being less than 5 litres per day for every person employed in the factory.
![Page 71: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/71.jpg)
71Rules prescribed under 80: Facilities for keeping clothing: All classes of factories mentioned in the Schedule Section 43 annexed hereto shall provide facilities for keeping clothing not worn during working hours and for the drying of wet clothing. Such facilities shall include the provision of arrangements approved by the Chief Inspector of Factories. SCHEDULE: Glass works, Engineering workshops, Iron and steel works, Oil mills, Chemical works, Automobile workshops, Dyeing works. Rule prescribed under Sub- 81: First-aid appliances: The first-aid boxes or cupboards shall be distinctively -section(1) of Section 45 marked with a red cross on white back ground and shall contain the following equipment:— (a) For factories in which the number of persons employed does not exceed ten, or (in the case of factories in which mechanical power is not used) doe not exceed fifty persons, each first-aid box or cupboard shall contain the following equipments— (i) Six small size sterilised dressings; (ii) Three medium size sterilised dressings; (iii) Three large size sterilised dressings (iv) Three large size sterilised burn dressings. (v) One (60 ml) bottle of cetrimide solution (1%) or a suitable antiseptic solution; (vi) One (60ml) bottle of mercurochrome solution (2%) in water; (vii) One (30ml) bottle containing sal-volatile having the dose and mode of administration indicated on the label; (viii) One pair of scissors; (ix) One roll of adhesive plaster (2 cm x 1m); (x) Six pieces of sterilised eye pads in separate sealed packets; (xi) A bottle containing 100 tablets(each of 325 mg) of aspirin or any other analgesic; (xii) Polythene wash bottle (½ litre i.e.500 cc.) for washing eyes; (xiii) A snake bite lancet; (xiv) one (30 ml) bottle containing potassium permanganate crystals; (xv) One copy of first-aid leaflet issued by the Directorate General of Factory Advice Service and Labour Institutes, Government of India, Mumbai. (b) For factories in which mechanical power is used in which the number of persons employed exceeds ten but does not exceed fifty, each first-aid box or cupboard shall contain the following equipments:— (i) Twelve small size sterilised dressings; (ii) Six medium size sterilised dressings; (iii) Six large size sterilised dressings; (iv) Six large size sterilised burn dressings; (v) Six (15 gm) packets of sterilised cotton wool; (vi) One (120 ml) bottle of cetrimide solution (1%) or a suitable antiseptic solution; (vii) One (120ml) bottle of mercurochrome solution (2%) in water; (viii) One (60ml.) bottle containing sal-volatile having the dose and mode of administration indicated on the label; ((ix) One pair of scissors; (x) Two rolls of adhesive plaster (2 cm x 1 m ); (xi) Eight pieces of sterilised eye-pads in separate sealed packets; (xii) One tourniquet; (xiii) One dozen safety pins; (xiv) A bottle containing 100 tablets (each of 325 mg.) of aspirin or any other analgesic; (xv) One polythene wash bottle (½ litre, i.e. 500cc.) for washing eye; (xvi) A snake-bite lancet; (xvii) One (30ml.) bottle containing potassium permanganate crystals; (xviii) One copy of the first-aid leaflet issued by the Directorate General of Factory Advice Service and Labour Institute, Government of India, Mumbai. (c) For factories employing more than fifty persons,each first-aid box or cupboard shall contain the following equipments:— (i) Twenty-four small size sterilised dressings; (ii) Twelve medium size sterilised dressings; (iii) Twelve large size sterilised dressings; (iv) Twelve large size sterilised burn dressings; (v) Twelve (15gm.) packets of sterilised cotton wool; (vi) One (200 ml.) bottle of cetrimide solution (1%) or a suitable antiseptic solution; (vii) One (200ml ) bottle of mercurochrome (2%) solution in water; (viii)One (120ml.) bottle of sal-volatile having the dose and mode of administration indicated on the label; (ix) One pair of scissors; (x) One roll of adhesive plaster (6 cm x 1 m); (xi) Two rolls of adhesive plaster (2 cm x 1 m); (xii)Twelve pieces of sterilised eye-pads in separate sealed packets; (xiii) A bottle containing 100 tablets (each of 325 mg.) of aspirin or any other analgesic; (xiv) One polythene wash bottle (500 cc) for washing eyes; (xv) Twelve roller bandages 10cm wide; (xvi) Twelve roller bandages 5 cm wide; (xvii) Six triangular bandages; (xviii) One tourniquet; (xix) A supply of suitable splints; (xx) Two packets of safety pins; (xxi) Kidney tray; (xxii) A snake-bite lancet; (xxiii) One (30 ml) bottle containing potassium permanganate crystals; (xxiv) One copy of first-aid leaflet issued by the Directorate General of Factory Advice Service and Labour Institute, Government of India, Mumbai; Provided that items (xvi) to (xxi) inclusive, need not be included in the standard first-aid box or cupboard : (a) where there is a properly equipped ambulance room; or (b) if at least one box containing such items and placed and maintained in accordance with the requirements of Section 45 is separaely provided. (c) In lieu of the dressings required under items (i) and (ii), there may be substituted adhesive wound dressings approved by the Chief Inspector Of Factories and other equipment or medicines that may be considered essential and recommended by the Chief Inspector of Factories from time to time.
![Page 72: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/72.jpg)
72Rule Prescribed under 82: Notice regarding first-aid: A notice containing the names of the persons working Section 112 read with sub- within the precincts of the factory who are trained in first-aid treatment and who are section(3) of Section45 in charge of the first-aid boxes or cupboard shall be pasted in every factory at a conspicuous place and near each such box or cupboard. The notice shall also indicate workroom where the said persons shall be available.The name of the nearest hospital and its telephone number shall also be mentioned prominently in the said notice. Rule prescribed under 83: Ambulance room; (1) Every ambulance room shall be under the charge of at least Section 112read with Sub- one whole-time qualified medical practitioner (hereinafter referred to as ‘Medical Officer’) -section(4) of Section 45 assisted by at least one qualified nurse or dresser-cum compounder and one nursing attendant in each shift; Provided that where a factory works in more than one shift, the Chief Inspector, if he is satisfied that on account of the siz of the factory, nature of hazards or frequency of accidents, it is not necessary to employ a wholetime medical officer for each shift separately, may, with the previous approval of the State Government, grant exemption from the provisions of this sub-rule and permit employment of only one whole time medical officer for more than one or all shifts; subject to the condition that— (a) there shall be no relaxation in respect of nursing staff ; and (b) the medical officer is readily available on call during the working hours of the factory. (2) There shall be displayed in the ambulance room a notice giving the name, address and telephone number of the medical practitioner in charge.The name of the nearest hospital and its telephone number shall also be mentioned prominently in the said notice. (2A) No medical officeer shall be required or permitted to do any work which is inconsistant with or detrimental to his responsibilities under this rule. (3) The ambulance room shall be separate from the rest of the factory and shall be used only for the purpose of first-aid treatment and rest. It shall have a floor and shall be adequately smooth, hard and impervious walls and floors, and shall be adequately ventilated and lighted by both natural and artificizl means. There shall be attached to it at least one latrine and urinal of sanitary type.An adequate supply of wholesome drinking water shall be laid on and the room shall contain at least: (i) A glazed sink hot and cold water always available; (ii) A table with a smooth top at least 180 cm x 105 cm; (iii) Means for sterilizing instruments; (iv) A couch; (v) Two stretchers; (vi) Two buckets or containers with close fitting lids; (vii) Two rubber hot water bags; (viii) A kettle and spirit stove or other suitable means of boiling water; (ix) Twelve plain wooden splints 900 mm x 100mm x 6 mm; (x) Twelve plain wooden splints 350 mm x 75 mm x 6 mm; (xi) Six plain wooden splints 250 mm x 50 mm x 12 mm; (xii) Six woolen blankets; (xiii) Three pairs artery forceps; (xiv) One bottle of spiritus ammoniac aromaticus (120 ml); (xv) Smelling salts (60 gm); (xvi) Three medium size sponges; (xvii) Six hand towels; (xviii) Four kidney trays; (xix) Four cakes of toilet preferably antiseptic soap; (xx) Two glass tumblers and two wine glasses; (xxi) Two clinical thermometers; (xxii) Two tea spoons; (xxiii) Two graduated(120 ml) measuring glasses; (xxiv) Two mini measuring glasses; (xxv) One wash bottle (1000 cc) for washing eyes; (xxvi) One bottle (one litre) carbolic lotion 1 in 20; (xxvii) Three chairs; (xxviii) One screen; (xxix) one electric hand torch; (xxx) Four first-aid boxes or cupboard stocked to the standard prescribed under (c) of rule 81; (xxxi) An adequate supply of anti-tetanus toxoid; (xxxii) Injections: morphia, pethidine, atropine,adrenaline, coramine, novocan (6 each ); (xxxiii) Coramine liquid (60 ml); (xxxiv) Tablets: antihistaminic, antispasmotic (25 each); (xxxv) Syringe with needles—2 cc, 5 cc, 10 cc and 50 cc; (xxxvi) Three surgical scissors; (xxxvii) Two needle holders, big and small; (xxxviii) Suturing needles and material; (xxxix) Three dissecting forceps; (xl) Three dressing forceps; (xli) Three scapels; (xlii) Rubber bandage— pressure bandage; (xliii) One stethescope; (xliv) Oxygen cylinder with necessary attachments. (4) The occupier of every factory to which these rules apply shall for the purpose of removing serious cases of accident or sickness, provide in the premises and maintain in good condition a suitable conveyance unless he has made arangements for obtaining such a conveyance from a hospital. (5) The Chief Inspector of Factories may, by an order in writing, exempt any factory from the requirements of this rule, subject to such conditions as he may specify in that order, if a hospital, ambulance room or dispensary is maintained at or within 200 metres of the precincts of the factory and such arrangements are made as to ensure the immediate treatment of all injuries sustained by workers within the factory and for providing rest to the workers so injured. Explanation: For the purpose of this rule, "qualified medical practitioner" means a person holding a qualification granted by an authority specified in the schedule to the Indian Medical Degrees Act, 1916, or in the schedule to the Indian Medical Act, 1956. Rules 84 to 90 prescribed 84: Canteens: (1) The occupier of every factory notified by the State Government, Under Sections 46 and112 and wherein more than two hundred and fifty workers are ordnarily employed shall provide canteens in standards prescribed in this rule.
![Page 73: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/73.jpg)
73 (2) The canteen building shall be situated not less than 15 metres from any latrine, urinal, boiler house, coal stacks, ash dumps and any other source of dust, smoke or obnoxious fumes; Provided that the Chief Inspector may, in any particular factory, relax the provisions of this sub-rule to such an extent as may be reasonable in the circumstances and may require measures to be adopted to secure the essential purpose of this sub-rule. (3) The canteen building shall be constructed in accordance with the plans approved by the Chief Inspector and shall accommodate at least a dining hall, kitchen, store room, pantry and washing places separately for workers and for utensils. (4) In a canteen the floor and inside walls upto a height of 1·2 metres from the floor shall be made of smooth and impervious material; the remaining portion of the inside walls shall be made smooth by cement plaster or in any other manner approved by the Chief Inspector. (5) The doors and windows of a canteen building shall be of fly-proof construction and shall allow adequate ventilation. (6) The canteen shall be sufficiently lighted at all times when any persons have access to it. (7) (a) In every canteen— (i) all inside walls of rooms and all ceilings and passages and staircases shall be lime washed or colour washed at least once in each year or painted once in three years dating from the period when last lime washed, colour washed or painted, as the case may be; (ii) all wood work shall be varnished or painted once in three years dating from the period when last varnished or painted; (iii) all internal structural steel work iron shall be varnished or painted once in three years dating from the period when last varnished or painted; Provided that inside walls of the kitchen shall be lime washed once every four months. (b) Records of dates on which lime washing, colour washing, varnishing or painting iscarried out shall be maintained in the prescribed Register in Form 7. (8) The precincts of the canteen shall be maintained in a clean and sanitary condition. Waste water shall be carried away in suitable covered drains and shall not be allowed to accumulate so as to cause a nuisance. Suitable arrangements shall be made for the collection and disposal of garbage. 85: Dining hall: (1) The dining hall shall accommodate at a time at least 30 % of the workers working at a time; Provided that , in any particular factory or in any particular class of factories, the Inspector of Factories may by an order in writing in this behalf alter the percentage of workers to be accommodated. (2) The floor area of the dining hall, excluding the area occupied by the service counter any furniture except tables and chairs, shall be not less than 0·93 sq. metre per diner to be accommodated as prescribed in sub-rule (1). (3) A portion of the dining hall and service counter shall be partitioned off and reserved for women workers in proportion to their number. Washing places for women shall be separated and screened to secure privacy. (4) Sufficient tables, chairs or benches shall be available for the number of diners to be accommodated as prescribedin sub-rule (1). 86: Equipment: (1) There shall be provide and maintained sufficient utensils, crockery, cutlery, furniture and any other equipment necessary for the efficient running of the canteen. Suitable clean clothes for the employees serving in the canteen shall also be provided and maintained. (2) The furniture, utensils and other equipment shall be maintained in a clean and hygienic condition. A service counter, if provided, shall have a top of smooth and impervious material. Suitable facilities including an adequate supply of hot water shall be provided for the cleaning of utensils and equipment. 87: Prices to be charged: (1) Food, drink and other items served in the canteen shall be sold on a non-profit basis and the prices charged be subject to the approval of the Canteen Managing Committee; Provided that where a canteen is managed by workers' co-operative society, the prices to be charged may include a margin of profit upto a maximum of 5 % of its working capital. (2) In computing the prices referred to in sub-rule (1) the following items of expenditure shall not be taken into consideration, but will be borne by the occupier:— (a) the rent for land and building; (b) the depreciation and maintenance charges of the building and equipment provided for the canteen; (c) the cost of purchase, repairs and replacement of equipment including furniture, crockery, cutlery and utensils; (d) the water charges and expenses for providing lighting and ventilation; (e) the interest on the amount spent on the provision and maintenance of the building, furniture and equipment provided for the canteen; (f) the cost of fuel required for cooking or heating foodstuffs or water; and (g) the wages of the employees serving in the canteen and the cost of uniforms, if any, provided to them. (3) The charges per portion of food stuffs, beverages and any other items served in the canteen shall be conspicuously displayed in the canteen. 88: Accounts: (1) All books of accounts, registers and any other documents used in connection with the running of the canteen shall be produced on demand to an Inspector.
![Page 74: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/74.jpg)
74 (2) The accounts pertaining to the canteen shall be audited, once every twelve months, by registered accountant and auditors. The balance sheet prepared by the said auditors shall be submitted to the Canteen Managing Committee not later than two months after the closing of the audited accounts; Provided that the accounts pertaining to the canteen in a Government factory having ts own Accounts Department, may be audited in such department; Provided further that where the canteen is managed by a Co-operative Society registered under the Co-operative Societies Act, the accounts pertaining to such canteen may be audited in accordance with provisions of the Co-operative Societies Act. 89: Managing Committee: (1) The Manager shall appoint a Canteen Managing Committee which shall be consulted from time to time as to:— (a) the quality and quantity of food stuffs to be served in the canteen; (b) the arrangement of manus; (c) the times of meals in the canteen; and (d) any other matter as may be directed by the Committee; Provided that where the canteen is managed by a co-operative society registered under the Co-operative Societies Act, it shall not be necessary to appoint a Canteen Managing Committee. (2) The Canteen Managing Committee shall consist of an equal number of persons nominated by the occupier and elected by the workers. The number of elected workers shall be in the proportion of 1 for every 1000 workers employed in the factory, provided that in no case shall there be more than 5 or less than 2 workers on the committee; (3) The manager shall determine and supervise the procedure for elections to the Canteen Managing Committee. (4) A Canteen Managing Committee shall be dissolved by the manager two years after the last election, no account being taken of a by-election. 90: Annual medical examination: (1) Annual medical examination for fitness for each member of the canteen staff who handle food stuff shall be carried out by the factory medical officer or the certifying surgeon,which should include the following:— (a) routine blood examination; (b) routine and bacteriological testing of faeces and urine for germs of dysentry and typhoid fever; and (c) any other examination including chest x-ray that may be considered necessary by the factory medical officer or the certifying surgeon. (2) Any person who is in the opinion of the factory medical officer or the certifying surgeon is unsuitable for employment on account of possible risk to the health of others, shall not be employed as canteen staff. Rule prescribed under 91: Shelters, rest rooms and lunch rooms: (1) The shelters or rest rooms and lunch rooms Section 47 and 112 . shall conform to the following standards: —(a) the building shall be soundly constructed and all the walls and roof shall be of suitable heat resisting materials and shall be water-proof. The floor and wall to a height of 90 centimetres shall be so laid or finished as to provide a smooth, hard and impervious surface; (b) the height of every room in the building shall be not less than 3∙65 metres from floor level to the lowest part of the roof and there shall be at least 1∙12 m² of floor area for every person employed; Provided that: (i) workers who habitually go home for their meals during the rest periods may be excluded in calculating the number of workers to be acccomodated; and (ii) in the case of factories in existence at the date of commencement of the Act, where it is impracticable owing to lack of space to provide 1·12 m² of floor area for each person, such reduced floor area per person shall be provided as may be approved in writing by the Chief Inspector; (c) Effective and suitable provision shall be made in every room for securing and maintaining adequate ventilation by the circulation of fresh air and there shall also be provided and maintained sufficient and suitable natural or artificial lighting; (d) every room shall be adequately furnished with chair or benches with back-rest ; (e) sweepers shall be employed whose primary duty is to keep the rooms,building and precincts thereof in a clean and tidy condition; and (f) suitable provision shall be made inevery room for supply of drinking water and facilities for washing. (2) The lunch room shall—(a) comply with the requirements laid down in clause (a) to (f) of sub-rule (1); and (b) be provided with adequate number of tables with impervious tops for the use of workers for taking food. Rules 92 to 95 prescribed under Sub- 92: Creches: (1) The creche shall be conveniently accessible to the mothers section (3) of Sections 48 and 112 of the children accommodated therein and so far as is reasonably practicable it shall not be situated in close proximity to any part of the factory where obnoxious fumes, dust or odours are given off or in which excessively noisy processes arecarried on. (2) The building in which the creche is situated shall be soundly constructed and all the walls and roof shall be of suitable heat resisting materials and shall be water proof. The floor and internal walls of the creche shall be so laid or finished as to provide a smooth impervious surface. (3) The height of the rooms in the building shall be not less than 3·65 m from the floor to the lowest part of the roof and there shall be not less than 1·86 m² of floor area for each child to be accommodated. (4) Effective and suitable provision shall be made in every part of the creche for securing and maintaining adequate ventilation by the circulation of fresh air.
![Page 75: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/75.jpg)
75 (5) The crech shall be adequately furnished and equipped and in particular there shall be one suitable cot or cradle with the necessary bedding for each child (provided that for children over two years of age it will be sufficient if suitable bedding is made available), at least one chair or equivalent seating accommodation for the use of each mother while she is feeding or attending to her child, and sufficient supply of suitable toys for the older children. (6) A suitable fence and shady open air play ground shall be provided for the older children; Provided that the Chief Inspector may by an order in writing exempt any factory from compliance with this sub-rule if he is satisfied that there is not sufficient space available for the provision of such play ground. 93: Wash room: (1) There shall be in or adjoining the creche a suitable wash room for the washing of the children and their clothing. Wash room shall conform to the following standards:— (a) The floor and internal walls of the room to a height of 90cm, shall be so laid or furnished as to provide a smooth impervious surface. The room shall be adequately lighted and ventilated and the floor shall be effectively drained and maintained in a clean and tidy condition; (b) there shall be at least one basin or similar vessel for every four children accommodated in the crech at any one time together with a supply of water provided, if practicable, through tap from a source approved by the Health Officer. Such source shall be capable of yielding for each child a supply of at least 23 litres of water a day; and (c) an adequate supply of clean clothes, soap and clean towels shall be made available for each child while it is in the creche. (2) Adjoining the wash room referred to in sub-rule (1) a latrine shall be provided for the sole use of the children in the creche. The design of latrine and scale of accommodation to be provided shall either be aproved by the Public Health authority or, where there is no such Public Health authority, by the Chief Inspector of Factories. 94: Supply of milk and refreshment: At least a quarter litre of clean pure milk shall be available for each child on every day it is accommodated in the creche and the mother of such a child shall be allowed in the course of her daily work three hours intervals of at least 20 minutes each time to feed her child. For children above two years of age there shall be provided in addition adequate supply of wholesome refreshment. 95: Clothes for creche staff: The crech staff shall be provided with suitable clean clothes for use while on duty in the creche. Rule prescribed under Sect- 96: Exemption from the provision of creche: (1) In factories where the number -ion 50 read with Section 48 of married women or widows employed does not exceed 15 or where the factory works for less than 180 days in a calendar year, or where number of children kept in the creche was less than 5 in the preceding year, the Chief Inspector may exempt such factories from the provision of Section 48 and the rules 92 to 95 made thereunder, if he is satisfied that alternate arrangements as stipulated under sub-rule (2) are provided by the factory. (2) (a) The alternate arrangements required in sub-rule (1) shall include a creche building which has a minimum accommodation at the rate of 1∙86 m² per child and constructed in accordance with plans approved by Chief Inspector. (b) The creche building shall have:— (i) a suitable wash rooom for washing of the children and their clothing; (ii) adequate supply of soap and clean clothes and towel; and (iii) adequate number of female attendants who are provided with suitable clean clothes for use while on duty to look after the children in the creche. (3) The exemption granted under sub-rule (1) may at any time be withdrawn by the Chief Inspector if he finds after such enquiry as he may deem fit, that the factory has committed a breach of this rule. Rules prescribed under sub-se 97: Welfare Officers: (1) (a) The occupier of every factory employing between 500 -ction (2)Of Sections 49 and 50 and 2,000 workers shall appoint at least one Welfare Officer, and where the number of workers exceeds 2,000 there shall be an additional Welfare Officer for every additional 2,000 workers or fraction thereof over 500. In a factory where both men and women workers are employed, the number of women Welfare Officers to be appointed shall be in proportion to the women workers employed provided that where the number of women employed is more than 100 and the total number of workers does not exceed 2,500 an additional woman Welfare Officer shall be appointed. (b) Where there are more than one Welfare Officer appointed, one of them shall becalled the Chief Welfare Officer and the others Assistant Welfare Officers. (2) Qualifications: A person shall not be eligible for appointment as a Welfare Officer, unless he:— (a) possesses a Degree of a University recognised by the State Government in this behalf; (b) has obtained a Degree or Diploma in Social Science from any institution recognised by the State Government in this behalf; and (c) has adequate knowledge of the language spoken by the majority of the workers in the factory to which he is to be attached;
![Page 76: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/76.jpg)
76 Provided that the State Government may, by notification in the official gazette, grant exemption from the provisions of clause (b) in suitable cases till such time better facilities in the matter of training in social science are available; Provided further that, in the case of a person who is acting as a Welfare Officer at the commencement of these rules, the State Government may, subject to such conditions as it may specify, relax all or any of the aforesaid qualifications. (3) Recruitment of Welfare Officers: (a) The post of Welfare Officer shall be advertised in at least two newspapers having a wide circulation in the State, one of which shall be an English newspaper; (b) The selection shall be made from among the candidates applying for the post by a committee appointed by the occupier of the factory; (c) The appointment when made shall be notified by the occupier to the State Government or such authority as the State Government may specify for the purpose, giving full details of the qualification etc. of the officer appointed and the conditions of service. (4) Conditions of service of Welfare Officers: (a) A Welfare Officer shall be given appropriate status corresponding to the status of the other executive heads of the factory and he shall be started on a suitable scale of pay the minimum of which shall not be less than 900 per month; (b) The conditions of service of a Welfare Officer shall be the same as of other members of the staff of corresponding status in the factory; Provided that, in the case of discharge or dismissal, the Welfare Officer shall have a right of appeal to the State Government whose decision thereon shall be final and binding upon the occupier. (5) Duties of Welfare Officers: The duties of Welfare Officers shall be:— (a) to establish contacts and hold consultations with a view to maintaining harmonious relations between the factory management and workers; (b) to bring to the notice of the factory managements grievances of workers, individual as well as a collective, with a view to securing their expeditious redressal and to act as a liaison officer between the management and labour; (c) to study and understand the point of view of labour in order to help the factory management to shape and formulate labour policies and to interpret these policies to the workers in a language they can understand; (d) to watch industrial relations with a view to using his influence in the event of a dispute between the factory management and workers and to help to bring about a settlement by persuasive efort; (e) to advise on fulfilment by the management and the concerned department of the factory of obligations statutory or otherwise, concerning regulation of working hours, maternity benefit, medical care, compensation for injuries and sickness and other welfare and social benefit measures; (f) to advise and assist management in the fulfulment of its obligations, statutory or otherwise concerning prevention of personal injuries and maintaining a safe work environment in such factories where a Safety Officer is not required to be appointed under the enabling provisions under Section 40B; (g) to promote relations between the concerned department of the factory and workers which will bring about productive efficiency as well as amelioration in the working conditions and to help workers to adjust and adapt themselves to their working environments; (h) to encourage the formation of Works and Jont Production Committes, Co-operative Societies and Welfare Committees, and to supervise their work; (i) to encourage provision of amenities such as canteens, shelters for rest, creches,adequate facilities for drinking water, sickness and benevolent scheme, payments, pension and superannuation funds, gratuity payments, granting of loans and legal advice to workers; (j) to help factory management in regulating the grant of leave with wages and explain to the workers the provisions relating to leave with wages and other leave privileges and to guide the workers in the matter of submission of application for grant of leave for regulating authorised absence; (k) to advise on provision of welfare facilities, such as housing facilities, foodstaffs, social and recreational facilities, sanitation, advice on individual personnel problems and education of children; (l) to advise the factory management on questions relating to training of new starters, apprentices, workers on transfer and promotion, instructors and supervisors, supervision and control of notice board and information bulletins to further education of workers and to encourage their attendance at technical institutes; and (m) to suggest measures which will serve to raise the standard of living of workers and in general promote their well-being. (6) Welfare Officers not to deal with disciplinary cases or appear on behalf of the management against workers: No Welfare Officer should deal with any disciplinary cases against workers or appear before a conciliation officer in a court or tribunal on behalf of the factory management against a worker or workers. (7) Power of exemption: The State Government may by notification in the official gazette, exempt any factory or class or description of factories from the operation of all or any of the provisions of these rules subject to compliance with such alternative arrangements as may be approved. ____________________________________________________________________________________________ CHAPTER VI Working Hours for Adult Rule prescribed under sub- 98: Compensatory Holidays: (1) Except in the case of workeers engaged in any -Section (2) of Section 53 work which for technical reasons must be carried on continuously throughout the day, the compensatory holidays to be allowed under sub-section (1) of Section 53 of the Act shall be so spaced that not more than two holidays are given in the one week.
![Page 77: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/77.jpg)
77 (2) The manager of the factory shall display, on or before the end of the month in which holidays are lost, a notice in respect of workers allowed compensatory holidays during the following month and of the dates thereof, at the place at which the notice of periods of work prescribed under Section 61 is displayed. Any subsequent change in the notice in respect of any compensatory holiday shall be made not less than three days in advance of the date of that holiday. (3) Any compensatory holiday or holidays to which a worker is entitld shall be given to him before he is discharged or dismissed and shall not be reckoned as part of any period of notice required to be given before discharge or dismissal. (4) (a) The manager shall maintain a Register in Form 14; Provided that, if the Chief Inspector of Factories is of the opinion that any Muster roll or Register maintained as part of the routine of the factory or return made by the manager, gives in respect of any or all of the workers in the factory the particulars required for the enforcement of Section 52, he may by order in writing, direct that such Muster roll or Register or Return shall to the corresponding extent, be maintained in place of and be treated as the Register or Return required under this rule for that factory. (b) The Register, maintained under clause (a) shall be preserved for a period of three years after the last entry in it and shall be produced before the Inspector on demand. Muster roll prescribed under 99: Muster roll for exempted workers: The manager of every factory in which Sub-section(5) of Section 59 workers are exempted under Section 64 or 65 from the provisions of Section 51 or 54 shall keep a muster roll in Form 15 showing the normal piece-work rate of pay, or the rate of pay per hour, of all exempted employees. In this muster roll shall be correctly entered the overtime hours of work and payments therefor of all exempted workers. The muster roll shall alwaya be available for inspection. Notice prescribed under 100: Notice of periods of work for adults: The notice of periods of work for adult Sub-section(8) of Section 61 workers shall be in Form 16. Register prescribed under 101: Register of adult workers: The Register of adult workers shall be in Form 17. Sub-section(2) of Section 62 Rules 102 to 105 prescr- 102: Persons defined to hold positions of supervision or management: The follow- -ibed under Section 64 -ing persons shall be deemed to hold positions of supervision or management:— (a) all persons specified in the Schedule annexed hereto; and (b) any other person who, in the opinion of the Inspector, holds a position of supervision or management. SCHEDULE 1. Managers; 2. Assistant managers; 3. Engineers; 4. Foreman; 5. Weaving masters and spinning masters in textile mills. 6. Head electricians; 7.Supervisors and Instructors. 103: Persons to hold confidential positions: All timekeepers employed in a factory within the meaning of clause(1) of Section 2 shall be deemed to be employed in a confidential position in the factory. 104: List to be maintained of persons holding confidential position or position of supervision or management: A list showing the names and designations of all persons to whom the provisions of Sub-section (1) of Section 64 have been applied shall be maintained in every factory. 105: Exemption of certain adult workers: Adult workers engaged in factories specified in column 2 of the Schedule hereto annexed on the work specified in column 3 of the said schedule shall be exempted from the provisions of the sections specified in column 4 subject to the conditions, if any, specified in column 5 of the said schedule. SCHEDULE
Section of Class of Nature of Extent of Remarks the Act factory exempted exemption empowering work grant of exemption (1) (2) (3) (4) (5) 64(2) (a) All factories Urgent repairs Sections 51, (i) No worker shall be employed on such and 64(3) 52,54,55, repairs for more than 15 hours on any one
![Page 78: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/78.jpg)
78 56 and 61 day, 39 hours during any 3 consecutive days, or 66 hours during each period of seven consecutive days commencing from his first employment on such repairs. (ii) Within 24 hours of the commencement of the work, notice shall be sent ot the Inspector describing the nature of the uegent repairs and the period probably required for their completion.
(iii) Exemptions from the provisions of Section 54 shall apply only in the case of adult male workers.
64 (2) (b) All factories Work in the machine Sections 51, 54 The limits of work inclusive of over- and shop, the smithy or the 55,56 and 61 -time shall not exceed those mentined 64 (3). foundry or in connection in Sub-section (4) of Section 64. with the mill gearing, the electric driving or lighting apparatus, the mechanical or electrical lifts or the steam or water pipes or pumps of a factory. -do- -do- (b) Work of -do- -do- examining or repairing any machinery or other part of the plant which is necessary for carrying on work in the factory. -do- -do- (c) Work in boiler houses -do- -do- and engine rooms such as lighting fires in order to raise steam or generate gas preparatory to the commencement of regular work in the factory. 64(2) (c) All factories (a)Work performed Sections -do- and 64(3) by drivers on 51,54,55 lighting, ventilating and 61 and humidifying apparatus. -do- -do- (b)Work performed -do- -do- by fire pumpmen. 64(2)(d) (i)Oil tank Work performed by Sections 51, In the absence of a worker and 64(3) installations workers connected 52,54,55,56 who has failed to report for with pumping and 61 duty, a shift worker shall be operations allowed to work the whole or of a subsequent shift provided that – - -- - - - - - - - - - - - - - - do- - - - - - - - - - - - - - - - - - - - —(i) the next shift of the shift worker shall not commence before a period of 16 hours has elapsed; - - - - - - - - - - - - - - - - - - -do- - - - - - - - - - - - - - - - - - - - - - - (ii) within 24 hours of the commencement of the subsequent shift, notice shall be sent to the Inspector describing the
![Page 79: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/79.jpg)
79 circumstances under which the worker is required to work in the
subsequent shift; - - - - - - - - - - - - - - - - - -do- - - - - - - - - - - - - - - - - - - - - - (iii) the exemption will be restricted to only male adult workers; and - - - - - - - - - - - - - - - - - - do- - - - - - - - - - - - - - - - - - - - - - - (iv) the limits of work inclusive of overtime shall not exceed those mentioned
in Sub-section (4) of Section 64. -do- (2)Public hydro Operation and Sections 52, -do-
electric supply maintenance of 54 and 55 factories. Prime movers and auxiliaries, transfor- -mers and switches. (3) Public electric Work of engine -do- -do-
supply companies drivers and assistants, generating electri- generator attendants, city from oil in oilers and greasers, internal combustion switch board operators engines. and pumpmen. -do- (4)Electrical Work of operation -do- -do- transforming and maintenance of factories the transforming plant, switches and sychronous condensers.
-do- (5) Distilleries Work on the extrac- -do- -do- tion of sugar from various bases, fermentation of sugar juice and distillation of fermented wash. -do- (6) Sugar Extraction of the -do- -do
factories juice from the cane, clarification,
evaporation and boiling of the juice; curing of the massecuite; and bagging. -do- (7) Chemical Work on the
factories sulphur burners, -do- -do- chambers, concentra- tors and pumps; roasting furnace, manufacture of
hydrochloric and nitric acid, sulphates sulphides, nitrates, superphosphates and chlorides; and work on the steam service. -do- (8)Vegetable Work on refining , -do- -do-
![Page 80: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/80.jpg)
80hydrogenation bleaching, filtering factories. generation of hydrogen;
hydrogenating; deodorising processes; compression of oxygen and cylinder filling; and work on the electrical power plant. -do- (9) Ice factories Work of the engine and -do- -do- compressor drivers and assistants and oilers. -do- (10) Oil mills All work Section 54 and 55 -do- -do- (11)Flour mills All work. Sections 52 and 55. -do- -do- (12)Glass factories (a)Work in attending -do- -do- to furnace. (b)All work and processes Section 52 -do- from mixing of batch to removal of the manufactured glassware from the lears. -do- (13)Paper factories (a) All work on paper- Sections 54 and 55 -do- making machinery and on the generation and supply of power connected therewith. -do- -do- (b)Work on choppers, Sections 52,54 and 55 -do- digesters, kneaders, strainers and washers, beaters, paper-making machines, pumping plant reelers, cutters and power plant. -do- (14)Rubber tyre All work on curing Section 55 -do- factories process. -do- (15)Iron and steel All work on steel Sections 51, 52,54, -do- factories. furnaces 55 and 56 -do- (16) All Work on automatic Sections (1) The limits of work inclusive factories equipment engaged 51,52,54,55,56 of overtime shall not exceed in galvanizing, and 58. those mentioned in sub- anodising and section (4) of section 64. enamelling. - - - - - - - - - - - - - - - - - - -do- - - - - - - - - - - - - - - - - - - - - - - - - - - (2)The exemption shall be granted only in respect of adult male workers. 64 (2)(i) Newspaper Teleprinter Sections -do- printing service 51,54 and factories 56. 64 (2) (j) All factories Loading Sections -do- . and unloading 51,52,54 of railway wagons, 55 and 56. Lorries or trucks 64(2)(k) Any factory Work of national Sections 51, (1)The limit of work
![Page 81: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/81.jpg)
81 or class or importance as may 52,54,55,56 and inclusive of overtime description of be notified by the 58. shall not exceed those factories as may State Government in mentioned in sub-section(4) be notified by the the Official Gazette. of section 64. State Government in the Official (2)The exemption shall Gazette. be limited to adult male Workers.
Explanations :- 1. The following shall be considered to be urgent repairs :-
(a) repairs to any part of the machinery, plant or structure of a factory which are of such a nature that delay in their execution would involve danger to human life or safety or the stoppage of manufacturing process;
(b) breakdown repairs to the motive power, transmission or other essential plant of other factories, collieries, railways, dockyards, harbours, tramways, motor transport, gas, electrical generating and transmission, pumping or similar essential or public utility services carried out in general engineering works and foundries and which are necessary to enable such concerns to maintain their main manufacturing processes, production or services during normal working hours;
(c) repairs to deep-sea ships, and repairs to commercial air-craft done in a factory which are essential to enable such ships or air-craft to leave port at proper time or continue their normal operations in a sea-worthy or air-worthy condition, as the case may be; and
(d) repairs in connection with a charge of motive power, for example, from steam to electricity or vice versa, when such work cannot possibly be done without stoppage of the normal manufacturing process.
2. Periodical cleaning is not included in the terms “examining’ or “repairing”.
____________________________________________________________________________________________
CHAPTER VII
Employment of Young persons Notice prescribed under 106: Notice of periods of work for children: The notice of period of work Sub-section(3) of Section 72 for child workers shall be in Form 18. Register prescribed under 107: Register of child workers: The register of child workers shall be in Sub-section(2) of Section 73 Form 19. ____________________________________________________________________________________________ CHAPTER VIII Leave with wages Rules 118 to 115 prescribed 108: Register of leave with wages: (1) The Manager shall keep a register in under Sectios 83 and 112. Form 20 hereinafter called the Register of leave with wages; Provided that , if the Chief Inspector is of the opinion that any muster roll or register maintained as part of the routine of the factory, or return made by the manager, gives in respect of any or all of the workers in the factory, the particulars required for the enforcement of Chapter VIII of the Act, he may, by order in writing, direct that such muster roll or register or return shall, to the corresponding extent, be maintained in place of and be treated as the register or return required under this rule in respect of that factory. (2) The register of leave with wages shall be preserved for a period of three years after the last entry in it and shall be produced before the Inspector on demand. 109: Leave book: (1) The manager shall provide each worker who has become entitled to leave during a calendar year, with a book in Form 21 (hereinafter called the Leave book ) not later than the 31st January of the following calendar year. The leave book shall be the property of the worker and the manager or his agent shall not demand it except to make entries of the dates of holidays or interruptions in service, and shall not keep it for more than a week at a time; provided that, in the case of a worker who is discharged or dismissed from service during the course of the year that is, who is covered under sub-section (3) of Section 79 of the Act, the manager shall issue an abstract from the Register of Leave with Wages (Form 20) within a week from the date of discharge or dismissal, as the case may be.
![Page 82: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/82.jpg)
82 (2) If a worker loses his leave book, the manager shall provide him with another copy on payment of paise fifty and shall complete it from his record. 110: Medical certificate: If any worker is absent from work and it appears that his absence is due to illness, he shall, if so required by his manager by a notice in writing, submit a medical certificate signed by a registered medical practitioner or by a registered or recognised Vaid or Hakim stating the cause of the absence and the period for which the worker is, in the opinion of such medical practitioner, Vaid or Hakim, unable to attend to his work. 111: Notice to Inspector of involuntary unemployment: The manager shall give, as soon as possible, a notice to the Inspector of every case of involuntary unemployment of workers, giving numbers of unemployed and the reason for their unemployment. Entries to this effect shall be made in the Register of Leave with Wages and the Leave Book in respect of each worker concerned. 112: Notice by worker: Before or on the completion of a period of twelve months' continuous service in the factory, as defined in Section 79, a worker may give notice to the manager of his intention not to avail himself of holidays falling due in the following period of twelve months. The manager shall make an entry to that effect in the Register of Leave Book with Wages and in the Leave Book of the worker concerned. 113: Notice of leave with wages: (1) Except in regard to a worker who has given notice of his intention not to avail himself of holidays in the year in which these fall due, the manager shall, by a notice displayed at the place at which the notice of the period of work required by Section 61 is displayed, fix the dates on which leave with wages shall be allowed to each worker or group of workers including any worker who has accumulated his leave. This date shall not, in an individual case, be earlier than four weeks from the date of notice unless the worker agrees to take the leave earlier. The necessary entries shall be made in the Register of Leave with Wages and the Leave Book of the worker concerned; (2) As far as circumstances permit, members of the same family comprising husband, wife and children shall be allowed leave on the same date; (3) The manager may alter the dates fixed for leave only after giving a notice of four weeks to the worker; (4) A worker may exchange the period of his leave with another worker, subject to the approval of the manager. 114: Payment of wages if the worker dies: If a worker dies before he resumes work, the balance of his pay due for the period of holidays shall be paid to his nominee within one week of the intimation of the death of the worker. For this purpose each worker shall submit a nomination in Form 22 duly signed by himself and attested by two witnesses. The nomination shall remain in force untilit is cancelled or revised by another nomination. 115: Register to be maintained in case of exemption under Section 84: (1) Where an exemption is granted under Section 84, the manager shall maintain a register showing the position of each worker as regards leave due, leave taken and wages granted; (2) He shall display at the main entrance of the factory, a notice giving full details of the system established in the factory for leave with wages and shall send a copy of it to the Inspector; (3) Noalteration shall be made in the scheme approved by the State Government at the time of granting exemption under Section 84 without its previous sanction. ____________________________________________________________________________________________ CHAPTER IX Special provisions Rule prescribed 116: Dangerous manufacturing processes or operations: (1) The following manufacturing Under Section 87 processes or operations when carried on in any factory are declared to be dangerous manufacturing processes or operations under Section 87:—
![Page 83: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/83.jpg)
83
** Ref: page-120 for details of the above Schedules (1A) "First employment" means employment for the first time in a hazardous process or operation so notified under Section 87, or re-employment therein after cessation of employment in such process or operation for a period exceeding three calendar months. 2) The provisions specified in the schedules annexed hereto shall apply to any class or description of factories wherein dangerous manufacturing processec or operations specified in each schedule are carried on (3) (a): For the medical examinations of the workers to be carried out by the Certifying Surgeon as required by the schedule annexed to this rule, the occupier of the factory shall pay fees at the rate of Rupees five per examination of each worker every time he is examined. (b) : The fees prescribed in sub-rule (3) (a) shall be exclusive of any charges for biological, radiological, or other tests which may have to be carried out in connection with the medical examinations. Such charges shall be paid by the occupier; (c) : The fees to be paid for medical examinations shall be paid into the local treasury under the head of account "087— Labour and Employment—E— Fees realised under the Factories Act, 1948" ; (4) Notwithstanding the provision specified in the schedules annexed to these rules, the Inspector may by issue of orders in writing to the manager or occupier or both, direct them to carry out such measures and within such time, as may be specified in such order with a view to removing conditions dangerous to the health of the workers, or to suspend any process, where such process constitutes, in the opinion of the Inspector, imminent danger of poisoning or toxicity. (5) Any register or record of medical examinations and test connected therewith required to be carried out under any of the schedules annexed hereto in respect of any worker shall be kept readily available to the Inspector and shall be preserved till the expiry of one year after the worker ceases to be in employment of the factory. Rule prescribed under 117: Notification of accidents and dangerous occurences: (1) When any accident Section 88 and 88-A. which results in the death of any person or which results in such bodily injury to any person as is likely to cause his death, or any dangerous occurence specified in the schedule annexed hereto takes place in a factory the manager of the factory shall forthwith send a notice thereof by telephone, special messenger or telegram to the Inspector and the Chief Inspector. (2) When any accident or any dangerous occurence specified in the schedule annexed hereto,which results in the death of any person or which results insuch bodily injury to any person as is likely to cause his death, takes place in a factory, notice as mentioned in sub-rule (1) shall be sent to:— (a) : the District Magistrate or Sub-Divisional Officer; (b): the Officer-In-Charge of the nearest police station; (3) :the relatives of the injured or deceased person. (3) Any notice given as required under sub-rules (1) and (2) shall be confirmed by the manager of the factory to the authorities mantioned in those sub-rules within 12 hours of the accident or the dangerous occurrence by sending them a written report in Form 30 in thecase of an accident or dangerous occurrence causing death or bodily injury
I. Manufacture of aerated water and processes incidental thereto.
II. Electolytic plating or oxidation of metal articles by use of an electrolyte containing acids, bases or salts of metals such as chromium, nickel, cadmium, zinc, copper, silver, gold etc.
III. Manufacture and repair of electric accumulators IV. Glass manufacture. V. Grinding or glazing of metals. VI. Manufacture and treatment of lead and certain
compounds of lead. VII. Generating petrol gas from petrol. VIII. Cleaning or smoothing, roughening etc. Of articles
by a jet of sand, metal shot or grit or other abrasive proelled by a blast of compressed air or steam.
IX. Liming and tanning of raw hides and skins and processes incidental thereto.
X. Certain lead processes carried on in printing presses and type foundries.
XI. Manufacture of pottery. XII. Chemical works. XIII. Manipulation of stone or any other material containing free silica.
XIV. Handling and processing of asbestos, manufacture of any article of asbestos and any other process of manufacture or otherwise in which asbestos is used in any form.
![Page 84: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/84.jpg)
84to any person; and in Form 31 in the case of a dangerous occurrence which has not resulted in any bodily injury to any person. (4) When any accident or any dangerous occurrence specified in the schedule, takes place in a factory and it causes such bodily injury to any person as prevents the person injured from working for a period of 48 hours or more immediately following the accident or the dangerous occurrence, as the case may be, the manager of the factory shall send a report thereof to the Inspector in Form 30 within 24 hours after the expiry of 48 hours from the time of the accident or the dangerous occurrence; Provided that, if in the case of an accident or dangerous occurrence, death occurs of any person injured by such accident or dangerous occurrence after the notices and reports referred to in the foregoing sub-rules have been sent, the manager of the factory shall forthwith send a notice thereof by telephone, special messenger or telegram to the authorities and person mentioned in sub-rules (1) and (2) and also have this information confirmed in writing within 12 hours of the death. Provided further that, if the period of disability from working for 48 hours or more referred to in sub-rule (4) does not occur immediately following the accident, or the dangerous occurrence, but later, or occurs in more than one spell, the report referred to shall be sent to the Inspector in the prescribed Form 30 within 24 hours immediately following the hour when the actual total period of disability from working resulting from the accident or the dangerous occurrence becomes 48 hours. SCHEDULE The following classes of dangerous occurrences, whether or not they are attended by personal injury or disablement:— 1. Bursting of a plant used for containing or supplying steam under pressure greater than atmospheric pressure. 2. Collapse or failure of a crane, derrick, winch, hoist or other appliances used in raising or lowering persons or goods, or any part thereof, or the overturning of a crane. 3. Explosion, fire, bursting out, leakage or escape of any molten metal, or hot liquid or gas causing bodily injury to any person or damage to any room or place in which persons are employed, or fire in rooms of cotton pressing factories when a cotton opener is in use. 4. Explosion of a receiver or container used for the storage at a pressure greater than atmospheric pressure of any gas or gases (including air) or any liquid or solid resulting from the compression of gas. 5. Collapse or subsidence of any floor, gallary, roof, bridge, tunnel,chimney, wall, building or any other structure. Rule prescribed under sub- 118: Notice of poisoning or disease: A notice in Form 32 should be sent -section (1) of Section 89. forthwith both to the Chief Inspector and to the Certifying Surgeon, by the Manager of a factory in which there occurs a case of lead phosphorus, mercury, manganese, arsenic, carbon bisulphide or benzene poisoning; or of poisoning by nitrous fumes or by halogens or halogen derivatives of the hydrocarbons of the aliphatic series; or of chrome ulceration, anthrax, silicosis, toxic aneamia, toxic jaundice, primary opitheliomatous cancer of the skin, or of phathological manifestations due to radium or other radio active substances or X-rays. _____________________________________________________________________________________________ CHAPTER X Supplemental Rule prescribed under sub- 119: Procedure in appeals: (1) An appeal presented under Section 107 shall lie -section (1) of Section 107 with the Chief Inspector, or in cases where the order appealed against is an order passed by that officer, with the State Government or with such authority as the State Government may appoint in this behalf and shall be in the form of a memorandum setting forth concisely the grounds of objection to the order and bearing court fee stamp in accordance with Article 11 of Schedule II to the Court Fees Act, 1870, and shall be accompanied by a copy of the order appealed against. (2) On receipt of the memorandum of appeal, the appellate authority shall, if it thinks fit or if the appellant has requested that the appeal should be heard with the aid of accessors, call upon the body declared under sub-rule (3) to be representative of the industry concerned, to appoint an accessor within a period of 14 days. If an assessor is nominated by such body, the appellate authority shall appoint a second assessor itself. It shall then fix a date for the hearing of the appeal and shall give due notice of such date to the appellate and to the Inspector whose order is appealed against, and shall call upon the two assessors to appear upon such date to assist in the hearing of the appeal. (3) The following shall be the body for the purpose of sub-rule (2), viz,— 'The Meghalaya Industrial Association'. (4) An assessor appointed in accordance with the provisions of sub-rule (2) and (3) shall receive, for the hearing of the appeal, a fee to be fixed by the appellate authority, subject to a maximum of Rs. 50 (Rupees Fifty only) per diem. He shall also receive the actual travelling expenses. The fees and travelling expenses shall be paid to the
![Page 85: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/85.jpg)
85assessors by the State Government, but where assessors have been appointed at the request of the appellant and the appeal has been decided wholly or partly against him the appellate authority may direct that the fees and travelling expenses of the assessors shall be paid in whole or in part by the appellant. Rule prescribed under sub- 120: Display of notices: The abstract of the Act and of the rules required to be -section (1) of Section 108. displayed in every factory shall be in Form 33. Rule prescribed 121: Returns: The manager of every factory shall furnish to the Inspector or other under Section 110. officer appointed by the State Government in this behalf the following returns in the form and within the due dates specified below: (a): Annual return in Form 34, in duplicate, on or before the 31st January of each year; and (b): Half-yearly return in Form 35, in duplicate, on or before the 15th July of each year. Rule prescribed 122: Service of notices: The despatch by post under registered cover of any notice under Section 109. or order shall be deemed sufficient service on the occupier, owner or manager of a factory of such noltice or order. Rules 123 to 127 prescribed 123: Information required by the Inspector: The occupier, owner or manager Under Section 112. of a factory shall furnish any information that an Inspector may require for the purpose of satisfying himself whether any provision of the Act has been complied with or whether any order of an Inspector has been duly carried out. Any demand by an Inspector for any such information, if made, during the course of any inspection, shall be complied forthwith if the information is available in the factory, or, if made in writing, shall be complied with, within seven days of receipt thereof. 123A: Permissible levels of certain chemical substances in work environment: Without prejudice to the requirements in any other provisions in the Act or the Rules, the requirements specified in this Schedule shall apply to all factories. SCHEDULE 1. Definitions: for the purpose of this schedule— (a): "mg/m³" means milligram of a substance per cubic metre of air; (b): "mppcm" means million particles of a substance per cubic metre of air; (c): "ppm" means parts of vapour or gas per million parts of air by volume at 25°C and 760 mm of mercury pressure; (d): " Time weighted average concentration" means the average concentration of a substance in the air at any work location in a factory computed from evaluation of adequate number of air samples taken at that location, spread over the entire shift on any day, after giving weightage to the duration for which each such sample is collected and the concentration prevailing at the time of taking the sample, C1T1 + C2 T2 +. . . . . . . . . . . . .. . . . . . . . . CnTn Time weighted average concentration= ------------------------------------------------------------------- T1+ T2+. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tn Where C1 represents the concentration of the substance for duration T1 (in hours) ; C2 represents the concentration of the substance for duration T2 (in hours) ; Cn represents the concentration of the substance for duration Tn (in hours). (e): " Work location" means a location in a factory at which a worker works or may be required to work at any time during any shift on any day. 2. Limits of concentration of substances at work locations: (1) The time weighted average concentration of any substance listed in the table 1 or 2 of the schedule, at any work location in a factory during any shift on any day shall not exceed the limit of the permissible time weighted average concentration specified in respect of that substance; Provided that in the case of a substance mentioned inTable 1 in respect of which a limit in terms of short term maximum concentration is indicated, the concentration of such a substance may exceed the permissible limits of the time weighted average concentration for the substance for short periods not exceeding 15 minutes at a time, subject to the condition that— (a) Such periods during which the concentration exceeds the prescribed time weighted average concentration are restricted to not more than 4 per shift; (b): the time interval between any two such periods of higher exposure shall not be less than 60 minutes; and (c): At no time the concentration of the substance in the air shall exceed the limit of short term maximum concentration. (2) In the case of any substance given in Table 3, the concentration of the substance at any work location in a factory at any time during any day shall not exceed the limit of exposure for that substance specified in the table.
![Page 86: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/86.jpg)
86 (3) In the cases where the word 'skin' has been indicated against certain substance mentioned in Tables 1 and 3, appropriate measures shall be taken to prevent absorption through cutaneous routes particularly skin, mucous membranes and eyes as the limit specified in these Tables are for conditions where the exposure is only through respiratory tract. (4) (a) In case, the air at any work location contains a mixture of such substances mentioned in Table 1, 2 or 3 which have similar toxic properties, the time weighted concentration of each of these substances, during the shift should be such, that when these time weighted concentration divided by the respective permissible time specified in the above mentioned tables and the fractions obtained are added together, the total shall not exceed unity, i.e: C1 + C2 Cn -------------. . . . . . . . . . . . . . . . . . . —. . . ---------- should not exceed unity, when C1, C2 . . . . .Cn L1 + L2 Ln are the time weighted concentration of the toxic substances 1 , 2.....and n respectively, determined after measurement at the work location and L1, L2. . . . .Ln are the permissible time weighted average concentration of the toxic substances 1, 2......... and n respectively. (b) Incase the air at any work location contains a mixture of substances, mentioned in table 1, 2 or 3 and these do not have similar toxic properties, then the time weighted concentration of each of these substances shall not exceed the permissible time weighted average conentration specified in the above mentioned tables, for that particular substance. (c) The requirements in clauses (a) and (b) shall be inaddition to the requirements in paragraphs 2 (1) and 2 (2). 3. Sampling and evaluation procedures: (1) Notwithstanding provisions in any other paragraphs, the sampling and evaluation procedures to be adopted for checking compliance with the provisions in the schedule shall be as per standard procedures in vouge from time to time. (2) Notwithstanding the provisions in paragraph 5, the following conditions regardng the sampling and evaluation procedures relevant to checking compliance with the provisions in this schedule are specified: (a) For determination of the number of particles per cubic metre in item 1(a)(i)(1) in table 2, samples are to be collected by standard or midget impinger and the counts made by light-field technique; (b) The percentage of quartz in the three formulae given in item 1 (a) (i) of table 2 is to be determined from airborne samples; (c) For determination of number of fibres as specified in item 2 (a) of table 2, the Membrane Filter Method at 430x magnification (4mm objective) with phase contrast illumination should be used; (d) Both for determination of concentration and percentage of quartz for use of the formula given in item 1(a)(i)(2) of table 2, the fraction passing through a size-selector with the following characteristics should only be considered:
Aerodynamic diameter (Unit density sphere)
Percentage allowed By size-selector
2.0 90 2.5 75 3.5 50 5.0 25 10 0
4. Power to require assessment of concentration of substances: (1) An Inspector may, by an order in writing, direct the occupier or manager of a factory to get before any specified date, the assessment of the time weighted average concentration at any work location of any of the substances mentioned in table 1, 2 or 3 carried out; (2) The results of such assessment as well as the method followed for air sampling and analysis for such assessment shall be sent to the Inspector within 3 days from the date of completion of such assessment and also a record of the same kept readily available for inspection by an Inspector. 5. Exemption: If in respect of any factory or a part of a factory, the Chief Inspector is satisfied that, by virtue of the pattern of working time of the workers at different work locations or on account of other circumstances, no worker is exposed in the air at the work locations to a substance or substances specified in tables 1, 2 or 3 to such an extent as is likely to be injurious to his health, he (the Chief Inspector) may by an order in writing, exempt the factory or a part of the factory from the requirements in paragraph 2, subject to such conditions ,if any, as he may specify therein. TABLE 1 ___________________________________________________________________________________________ Substance Permissible limits of exposure _____________________________________________________________________________________________
![Page 87: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/87.jpg)
87 Time-weighted average Short-term maximum concentration concentration ppm mg/m³ ppm mg/m³ (1) (2) (3) (4) (5) Acetic acid 10 25 15 37 Acrolein 0.1 0.25 0.3 0.8 Aldrin-skin .... 0.25 .... 0.75 Ammonia 25 18 35 27 Aniline-skin 2 10 5 20 Anisidine(Opisomers)-skin 0.1 0.5 ..... ...... Arsenic & compounds (as As) .... 0.2 ..... ...... Benzene 10 30 ..... ...... Bromine 0.1 0.7 0.3 2 2 Butanone ( Methylethyl Ketone-MEK) 200 590 300 885 n-Butyl acetate 150 710 200 950 Sec/tert. Butyl acetate 200 950 250 1190 Cadmium-dust and salts (as Cd) ..... 0.05 ..... 0.2 Calcium oxide ..... 2 ..... ..... Carbaryl (Sevin) ..... 5 ..... 10 Carbofuran (Furadan) ..... 0.1 ..... ..... Carbon disulfide-skin 2 60 30 90 Carbon monoxide 50 55 400 440 Carbon tetrachloride-skin 10 65 20 130 Carbonyl chloride (Phosgene) 0.1 0.4 ..... ..... Chlordane-skin ..... 0.5 ..... 2 Chlorobenzene (monochlorobenzene) 75 350 ..... ..... Chlorine 1 3 3 9 Bis-chloromethyl ether 0.001 ..... ..... ..... Chromic acid and Chromates (as Cr) ..... 0.05 ..... ..... Chromium, Sel-chromic, Chromous salts(As Cr) ..... 0.5 ..... ..... Copper fume ...... 0.2 ..... ..... Cotton dust, raw ...... 0.2 ..... 0.6 Cresol, all isomers-skin 5 22 ...... ..... Cyanides (as CN)-skin ..... 5 ..... ..... Cyanogen 10 20 ..... ..... DDT(Dichlorodiphenyl trichloroethane) ..... 1 ..... 3 Demeton-skin 0.01 0.1 0.03 0.3 Diazion-skin ..... 0.1 ..... 0.3
![Page 88: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/88.jpg)
88 Dibutyl phthalate .... 5 ..... 10 Dichlorves (DDV)-skin 0.1 1 0.3 3 Dieldrin-skin .... 0.25 .... 0.75 Dinitrobenzene (all isomers)-skin 0.15 1 0.5 3 Dinitrobenzene-skin .... 1.5 .... 5 Diphenyl 0.2 1.5 0.6 4 Endosulfan (Thiodan)-skin .... 0.1 .... 0.3 Endrin-skin .... 0.1 .... 0.3 Ethyl acetate 400 1000 .... .... Ethyl alcohol 1000 1900 .... .... Ethyl amine 10 18 .... .... Flourides (as F) .... 2.5 .... .... Flourine 1 2 2 4 Hydrogen cyanide-skin 10 11 15 16 Hydrogen sulfide 10 15 15 27 Ironoxide fume (Fe2 O2 as Fe) .... 5 .... 10 Isoamyl acetate 100 525 125 655 Isoamyl alcohol 100 360 125 450 Isobutyl alcohol 50 150 75 225 Lead inorg , fumes and dusts (as Pb) .... 0.15 .... 0.45 Lindane-skin .... 0.5 .... 1.5 Malathion-skin .... 10 .... .... Manganese fume (as Mn) .... 1 .... 3 Mercury (as Hg ) .... 0.05 .... 0.15 Mercury (alkyl compounds)-skin (as Hg) 0.001 0.01 0.003 0.03 Methyl alcohol (methanol)-skin 200 260 250 310 Methyl cellosolve-skin (2 methoxy ethanol) 25 80 35 120 Methyl isobutyl ketone-skin 100 410 125 510 Naphthalene 10 50 15 75 .... ....
1 .... .... .... .... .... 1 .... .... 1 0.5 .... ....
.... .... ..
![Page 89: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/89.jpg)
89
TABLE 2 __________________________________________________________________________________
| Substance Permissible time weighted average concentration |
| (1) (2) |
Nickel carbonyl (as Ni) 10 50 15 75 Nitric acid 2 5 4 10 Nitric oxide 25 30 35 45 Nitrobenzene-skin 1 5 2 10 Oil mist mineral .... 5 .... 10 Parathion-skin .... 0.1 .... 0.3 Phenol-skin 5 19 10 38 Phorate (thimate) skin ..... 0.05 .... 0.2 Phosgene (Carbonyl Chloride) 0.1 0.4 .... ..... Phosphine 0.3 0.4 1 1 Phosphorus (Yellow) ..... 0.1 .... 0.3 Phosphorus pentachloride ..... 1 .... 3 Phosphorus trichloride 0.5 3 .... .... Picric acid-skin ..... 0.1 .... 0.3 Pyridin 5 15 10 30 Silane (silicon tetrahydride) 0.5 0.7 1 1.5 Styrene, monomer (Phenylethylene) 100 420 125 525 Sulfur dioxide 5 13 .... .... Sulfuric acid .... 1 .... .... Toluene 100 375 150 560 O-Toludine 5 22 10 44 Trichloroethylene 100 535 150 800 Vinyl chloride 5 10 .... .... Welding fumes .... 5 .... .... Xylene (o-m-p isomers) -skin 100 435 150 655
1. :Silica: (a) Crystalline (i) Quartz : 1060 (1) Interms of dust count ...... ---------------------------- mpp cm % Quartz + 10 30 (2) In terms of respirable dust ...... -------------------------------- mg/m³ % Respirable quartz +2 30 (3) In terms o f total dust ...... -------------------------------- mg/m³ % Quartz + 3 (ii) Cristobalite ...... Half the limits given against quartz. (iii) Tridymite ...... Half the limits given against quartz. (iv) Silica fused ...... Same limit as for quartz. (v) Tripoli ...... Same limit as in formula in item (2) given against quartz. (b) Amorphous ...... 705 mpp cm. 2. :Silica having less than 1% free silica by weight: (a) Asbestos-fibres longer than 5 microns ...... 2 fibres/ cubic centimetre. (b) Mica ...... 705 mpp cm. (c) Mineral wool fibre ...... 10 mg/m³. (d) Porlite ...... 1060 mppcm. (e) Portland cement ...... 1060 mppcm
![Page 90: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/90.jpg)
90
TABLE 3 ___________________________________________________________________________________ | Substance Permissible limit of exposure | | ppm mg/m³ | 124: Muster Roll: The manager of a factory shall maintain a muster roll of all the workers employed in the
factory in Form 36 showing (a) the name of each worker; (b) the nature of his work; and (c) the daily attendance of the worker; Provided that, if the daily attendance is noted in the Register of Adult Worker in Form 17 or the particulars required under this rule are noted in any register, a separate muster roll required under this rule need not be maintained.
125: Register of accidents and dangerous occurrences: The manager of every factory shall maintain a register of all accidents and dangerous occurrences which occur in the factory in Form 37.
126: Maintenance of Inspection Book: The manager of every factory shall maintain a bound inspection book and shall produce it when so required by the Inspector or Certifying Surgeon.
127: Information regarding closure of factories: The occupier or manager of every factory shall report to the Inspector any intended closure of the factory or any section or department thereof immediately it is decided to do so intimating the reason for the closure, the number of workers on the register on the date of the report, the number of workers likely to be affected by the closure and the probable period of the closure. Informations as to the particulars and quantity of stored chemicals and action taken or proposed to be taken to ensure safety from those chemicals while in storage during such closure shall also be furnished alongwith the report of intended closure.Information as to the particulars and quantity of stored chemicals and action taken or proposed to be taken to ensure safety from those chemicals while in storage during such closure shall also be furnished alongwith the report of intended closure. An intimation should also be sent to the Inspector as soon as the factory or the section or department of the factory, as the case may be, starts working again. 128: Notice regarding number of workers in each room: (1) The maximum number of workers who may be employed in each workroom or work hall shall be posted prominently by means of a notice displayed in each such room. When determining the maximum number of workers permissible in addition to the breathing space required to be provided as required under Section 16 (2), a maximum floor space of 2·3 m² (square metres) in case of existing factories and 3·3 m² in the case of factories built after the commencement of the Act, shall also be provided for each worker working at any one time, but such floor space shall be exclusive of the space occupied by machinery, fixtures and the materials in the room. (2) The Inspector may, for reasons to be recorded in writing, relax the provisions of this rule to such extent as he may consider necessary, where in his opinion, such relaxation can be made having regard to the health of the concerned workers.
(f) Soap stone ...... 705 mpp cm. (g) Talc (monobostiform) ...... 705 mppcm. (h) Talc (fibrous) ...... Same limit as for asbestos. (i) Tromolite ...... Same limit as for asbestos. 3. :Coal dust: (1) For airborne dust having less than 5% silicon dioxide by weight ...... 2 mg/m³ (2) For airborne dust having over 5% silicon dioxide ...... Same limit as prescribed by formula in item(2) against quartz.
Acetic anhydride 5 20 O-Dichlorobenzene 50 300 Formaldehyde 2 3 Hydrogen chloride 5 7 Manganese and compounds (as Mn) .... 5 Nitrogen dioxide 5 9 Nitroglycerin-skin 0.2 2 Potassium hydroxide .... 2 Sodium hydroxide .... 2 2,4,6 Trinitrotoluene (TNT) .... 0.5
![Page 91: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/91.jpg)
91 129: (a) The Meghalaya Factories Rules (The Assam Factories Rules, 1950) as adapted by Meghalaya are hereby repealed. (b) Notwithstanding such repeal, any decision given, order issued or action taken or whatsoever done under the Rules repealed shall be valid and shall be deemed always to have been given, issued, taken or done under the corresponding provisions of these Rules. ********************************************************************************************* ANNEXURE-I
FORM-1 Prescribed under Rule 4(2) APPLICATION FOR PERMISSION TO CONSTRUCT, EXTEND OR TAKE INTO USE ANY BUILDING AS A FACTORY 1. Applicant's name, calling and address: 2. Full name and postal address of factory: 3. Situation of factory: (a) Province: (b) District: (c) Town or village: (d) Nearest Police station: (e) Nearest railway station or steamer ghat: 4. Particular of plants to be installed: Signature of Applicant Date: _____________________________________________________________________________ Note: This application shall be accompanied by the following documents:— (a) a flow chart of the manufacturing process supplemented by a brief description of the process in its various stages; (b) plans, in duplicate, drawn to scale showing:— (i) the site of the factory and immediate surroundings including adjacent buildings and other structures, roads, drains etc; and (ii) the plan, elevation and necessary cross-sections of the various buildings indicating all relevant details relating to natural lighting, ventilation and means of escape in case of fire. The plans shall also clearly indicate the position of the plant and machinery, aisles and passage-ways; and (c) such other particulars as the Chief Inspector may require.
FORM 2 Prescribed under Rules 5, 8(2) and 14 APPLICATION FOR REGISTRATION AND GRANT OR RENEWAL OF LICENCE FOR THE YEAR.......................AND NOTICE OF OCCUPATION SPECIFIED IN SECTIONS 6 AND 7. (to be submitted in triplicate) 1. (a) Full name of factory: (b) Factory licence number if already registered before: 2. (a) Full postal address and : situation of factory. (b) Full postal address to which: communications relating to factory should be sent. 3. Nature of manufacturing process or processes— (a) carried on in the factory in the last : twelve months (in the case of factories already in existance); and (b) to be carried on in to the factory during the next twelve months
![Page 92: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/92.jpg)
92 ( in the case of all factories). 4. Names and values of principal products : Name Value manufactured during the last twelve months 1. ........................ ........................... (in the case of factories already in existence) 2. ........................ ........................... 3. ........................ ........................... 5. (a) Maximum number of workers proposed to be ― employed on any one day during the year. (b) Maximum number of workers employed on : any one day during the last twelve months (in the case of factories already in existence). (c) Number of workers to be ordinarily employed : in the factory. 6. (a) Nature and total amount of power (Kilowatts): (i) installed: (ii) proposed to be installed : (b) Maximum amount of power : (Kilowatts) proposed to be used 7. Full name and residential address of the person who: shall be the manager of the factory for the purposes of the Act. 8. Full name and residential address of the occupier, that is— (a) the proprioter of the factory in case of : a private firm or proprietory concern (b) the Directors in case of public limited: 1. ............................................................... liability company or firm. 2. ............................................................... 3. ............................................................... 4. ............................................................... 5. ...............................................................
(c) (i) the managing agent in case whether : a managing agent is employed. (ii) The Directors of the above managing : 1. ................................................................ agent. 2. ................................................................ 3. ................................................................ 4. ................................................................ (d) the share holders in case of a private : 1. ................................................................. company where no managing agent 2. ................................................................. is employed ; or 3. ................................................................. 4. ................................................................. (e) the chief administrative head in case of a : Government or local fund factory. 9. Full name and address of the owner of : the premises or building ( including the precincts thereof) referred to in Section 93. 10.Inthe case of a factory constructed or extended after the date of commencement of the rules: (a) reference number and date of aproval of the : plans for site whether for old or new building and for construction or extension of factory by State Government / Chief Inspector; and (b) reference number and date of approval of the : arrangements, if any, made for the disposal of trade waste and effluents and the name of the authority granting such approval. 11. (a) Amount of fees paid : Rs. .............................................. (b) In case of payment made in treasury— (i) name of treasury: : (ii) date of payment ; and :
![Page 93: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/93.jpg)
93 (iii) challaln number (Challan to be enclosed) : (c) Incase of transmission by crossed cheque— (i) name of the nationalised bank : (ii) crossed cheque number; : and (iii)date of cheque(crossed cheque drawn in : favour of the Chief Inspector of Factories to be enclosed). (d) In case of transmission by crossed postal order— (i) name of post office : (ii) crossed postal order number : and (iii) date of postal order (crossed postal order : drawn in favour of the Chief Inspector Factories to be enclosed) Signature of Occcupier : Date: Signature of Manager : Date: _____________________________________________________________________________________________ Notes: 1. This form should be completed in ink in block letters or typed ; 2. If power is not used at the time of filling up of this form,but is introduced later,the fact should be communicated to the Chief Inspector of Factories immediately; 3. If any of the persons named against item 8 is minor,the fact should be clearly stated; 4. In case of a factory where under the provision to sub-section (1) and (2) of Section 100,a person has been nominated as the Occupier,information required in item 8 should be supplied only in respect of that person; 5.In case of a factory where a managing agent or agents have been appointed as Occupiers under the Indian Companies Act,1956, information required in item 8 should be supplied only in respect of that person or persons.
FORM 3 Prescribed under Rule 6(1) LICENCE TO WORK A FACTORY Licence No.................................... Reg. No............................... Date of Reg................................ Licence is hereby granted to............................................................................................... for the premises known as ................................................................................................................................. situated at............................................................................................................................................................ for use as a factory within the limits stated hereinafter, subject to provisions of the Factories Act, 1948, and the rules made thereunder. The................................. 20.... Issuing Authority Valid for
Calendar year
Maximum number of workers on any one day
Maximum installed power (capacity in Kilowatts)
Fee Date of payment
Excess fee for late payment
Date of payment
Signature of the issuing Authority
Granted under Rule7
Renewed under Rule 8
TRANSFERS To whom transferred Year of transfer Date of payment of
transfer fee Signature of the Issuing Authority
![Page 94: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/94.jpg)
94 AMENDMENTS Year when amended
Amended Workers
Installed power(capacity in Kilowatts)
Date of pay- ment of ame- -ndment fee
Additional fee
Date of payment
Signature of the Issuing Authority
FORM 4 Prescribed under Rule 15 NOTICE OF CHANGE OF MANAGER 1. (a) Name of factory: (b) Current licence number of factory: 2. Postal address of factory: 3. Name of outgoing Manager: 4. (a) Name of new Manager : (b) Residential address : (c) Telephone number : 5. Date of appointment of new Manager: Signature of new Manager Signature of Occupier Date: _____________________________________________________________________________________________ FORM 5 Prescribed under Rule 18(2) CERTIFICATE OF FITNESS 1. (a) Serial Number: (b) Date: 2. Name of the person examined: 3. Father's Name: 4. Sex: 5. Residence: 6. Date of birth,if available and/or certified age: 7. Physical fitness: 8. Descriptive marks: 9. Reasons for— (a) refusal of certificate; or (b) certificate being...................................................... ................................................................................... Signature or left hand thumb Impression of the person examined Initial of Certifying Surgeon
Serial Number: Date: I certify that I have personally examined (Name)............................................................................... ........................................................................................... son/daughter of.................................................................. ........................................................................................... residing at.......................................................................... ........................................................................................... ........................................................................................... who is desirous of being employed in a factory, and that his/her age, as nearly as can be ascertained from my examination, is ...........................................years and that he/she is fit for employment in factory as an adult/child. His/her descriptive marks are......................................... ........................................................................................... ........................................................................................... Signature or left hand thumb Impression of the person examined. Signature of Certifying Surgeon.
** FORM 6:― Deleted
![Page 95: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/95.jpg)
95 FORM 7 Prescribed under Rules 19, 52 and 84(8)(b) RECORD OF LIME WASHING, PAINTING ETC. Part of factory,e.g.,name of room
Parts lime washed, varnished or, oiled, e.g., walls, ceilings, wood works etc.
Treatment,i.e.,whether limewashed, painted varnished or oiled.
Date on which lime washing, painting, varnishing or oiling was carried out.
Date Month Year
Remarks
1
2
3 4
5 6 7
Signature of Manager Date........................... FORM 8 Prescribed under Rule 27 HUMIDITY REGISTER Department......................................................................................................................................... : Distinctive mark or number................................................................ Hygrometer : : position in department.......................................................................... Year.............................................. Month................................................... Date Readings of hygrometer
Between 7 a.m. and 9 a.m.
Between 11 a.m.and 2 p.m. (but not in the rest interval)
Between 4p.m. and 5.30 p.m.
If no humidity, insert 'none'
Remarks Signature of person taking the reading
1st 2nd 3rd 4th 5th 6th ..... ..... ..... ...... 29th 30th 31st
Dry-bulb
Wet-bulb
Dry-bulb
Wet-bulb
Dry-bulb
Wet-bulb
Certified that the above entries are correct Signature and designation of the person taking the readings
![Page 96: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/96.jpg)
96 FORM 9 Prescribed under Rule 59 REGISTER OF WORKERS EMPLOYED FOR WORK ON OR NEAR MACHINERY IN MOTION 1. Name of worker: 2. Serial number as in the register of workers under Section 62: 3. Father's name: 4. Date of birth and age: 5. Nature of work: 6. Qualification,if any, or period of service on similar work: 7. Date when tight fitting clothing was provided: 8. Remarks: I certify that the above mentioned worker whose signature or left hand thumb-impression is given below, is a properly trained male adult worker who is competent to mount or slip belts, lubricate or do other adjusting operations on the machinery installed in my factory while they are in motion. Signature or thumb impression of worker Signature of Occupier Date: FORM 10 Prescribed under Rule 61(1) REPORT OF EXAMINATION OF HOISTS AND LIFTS Occupier (or owner) of premises: Address............................................................................................. 1. (a) Type of hoist or lift and identification number or description: (b) Date of construction or reconstruction (if ascertainable): 2. Are all parts of the hoist of lift of good mechanical construction, : sound material and adequate strength (so far as ascertainable) ? 3. Arte the following parts of the hoist or lift properly maintained : and in good working order? If not,state what defects have been found— (a) Enclosure of hoistway or lift way:
(e) Cage and platform & fittings,guides,buffers,interior of the hoistway or lift way:
(i)Brakes:
(b)Landing gatesand cage gates:
(f) Overrunning devices: (j) Worm or spur gearing:
(c) Interlocks and landing gates and cage gates:
(g) Suspension ropes or chain & their attachments:
(k) Other electrical equipment:
(d) Other gate fastenings: (h) Safety gear i.e.,arrangements for preventing fall of platform or cage brakes:
(l) Other parts:
4. What parts,if any, were inaccessible? 5. Repairs,renewal or alterations( if any) required and : the period within which they should be executed? 6. Maximum safe working load subject to repairs,renewals : or alterations (if any) specified in item 5. 7. Other particulars: I/We certify that on (date)...................I/We thoroughly examined this hoist or lift and that the above is a correct report of the result. Signature: Qualification: Address: If employed by a company or association, name and address of the company or association: _____________________________________________________________________________________________
![Page 97: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/97.jpg)
97 FORM 11 Prescribed under Rule 63(9)(b) REPORT OF EXAMINATION OR TEST OF PRESSURE VESSEL OR PLANT 1. Name of the Occupier (or factory): 2. Situation and address of factory : 3. Name,description and distinctive number : of pressure vessel or plant. 4. Name and address of manufacturer and : reference to their test certificate or certificate of competent person . 5. Nature of process in which pressure : vessel or plant is used. 6. Particulars of pressure vessel or plant— (a) Date of construction: (b) Thickness of walls: (c) Date on which the pressure vessel or plant was first taken into use: (d) Maximum permissible working pressure recommended by the manufacturer: (e) Design pressure , if known : (f) Brief history of the pressure vessel or plant,indicating : whether the Examiner has seen the last previous report. 7. Date of last hydrostatic test (if any) and pressure applied: 8. Is the pressure vessel or plant in open or : otherwise exposed to weather or to damp? 9. What part (if any) were inaccessible?: 10 What examination and tests were made? :
(Specify pressure if hydrostatic test was carried out). 11. Condition of pressure vessel or plant (State any defects materially affecting the maximum permissible working pressure or the safe working of the pressure vessel or plant):— External: Internal:
12. Are the required fittings and appliances provided in accordance with the rules?: 13. (a) Are all fittings and appliances properly : maintained a nd in good condition? (b) Have the pressure settings been checked and corrected ? : 14. (a) Repairs(if any) required : (b) Period within which the repairs should be executed : (c) Any other condition which the person making the : examination thinks it necessary for securing safe working. 15. Maximum permissible working pressure calculated from dimensions and : from the thickness and other data ascertained by the present examination due allowance being made for conditions of working if unusual or exceptionally severe (State minimum thickness of walls measured during the examination). 16. Where repairs affecting the maximum working ptressure are required, state the working pressure:— (a) after the examination of the period specified in item 14:
(b) after the expiration of such period if the required repairs have not been completed:
(c)after the completion of the required repairs:
17. Other observations: I certify that on (date).................the pressure vessel or plant described above was thoroughly cleaned and (so far as its construction permits) made accessible for thorough examination and for such tests as were necessary for thorough examination and that on the said date, I thoroughly examined this pressure vessel or plant, including its fittings and that the above is a true report of my examination. Signature:
Qualification: Address: Date: If employed by a company or associatioon, name and address of the company or association:—
![Page 98: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/98.jpg)
98 FORM 12 Prescribed under Rule 64(8)(b) REGISTER OF EXAMINATION OF GAS HOLDERS
Distinguish-ing number or letter of gasholder
Particulars of manufacture
Particulars of examination carried out under sub-rules 63(4) and (5)
Particulars of repairs
Remarks Maker’s
name Date of manufacture
Number of lifts
Maximum capacity in cubic metres
Pressure thrown by gasholder when full of gas
Method of examina-tion used
Date of examina-tion
Name and designation of the person making this examination
Nature of repairs
Date of repairs and painting
By whom repairs are carried out
1 2 3 4 5 6 7 8 9 10 11 12 13
__________________________________________________________________________________________________________________________________ FORM 13 Prescribed under Rule 64(8)(c) REPORT OF EXAMINATION OF WATER-SEALED GASHOLDER 1. Name of occupier (or factory) : 2. Situation and address of factory : 3. Name,description,distinguishing number or letter and type of gasholder : 4.Name and address of the manufacturer : 5.
(a) Number of lifts
(b) Maximum capacity in cubic meters
(c) Pressure thrown by holder when full of gas
6. Particulars of gas to be stored in the holder: 7. Particulars as to the condition of:
(a) Crown (b) Side sheeting,including grips and cups
(c) guiding mechanism (Roller carriages,rollers,pins,guiderails or ropes)
(d) Tank (e) Other structure,if any(columns,framing and bracing)
![Page 99: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/99.jpg)
99 (Form 13 contd./-) 8. Particular as to the position of the lifts at the time of examination: 9. Particulars as to whether the tank and lift were found sufficiently level : for safe working and if not,as to the steps taken to remedy the defect. 10. Date of examination and by whom it was carried out: 11. Condition of vessel— (a) External: (b) Internal: 12.(a) Are all fittings and appliances properly maintained and in good condition?: (b) Repairs,if any,required and period within which they should be executed: (c) Any other conditions which the persons making the : examination thinks it necessaary for securing safe working. 13. Other observations: I certify that on (date) ..............................the gasholder described above was thoroughly examined and such of the tests as were necessary made on the same day and that the above is a true report of my examination. Qualification; Address: Signature: Date: If employed by a company or association, name : and address of the company or association. FORM 14 REGISTER OF COMPENSATORY HOLIDAYS
Serial No.
Number in the register of workers
Name
Group or relay number
Number and date of exempting order
Year
Weekly rest days lost due to the exempting order in
Date of compensatory holidays given in
Lost rest days carried to the next year
Remarks
January to March
April to June
July to September
October to December
January to March
April to June
July to September
October to December
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
![Page 100: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/100.jpg)
100 FORM 15 Prescribed under Rule 99 OVERTIME MUSTER ROLL FOR EXEMPTED WORKERS Month ending.....................
Number in the register of adult workers
Name of exempted worker
Department Dates on which overtime has been worked
Extent of vertime on each occasion
Total overtime hours worked or production incase of piece workers
Normal hours
Normal rate of pay for piece work or rate of pay per hour
Overtime rate of pay
Normal earnings
Overtime earnings
Total earnings
Date on which overtime payment made
Remarks
FORM 16 Prescribed under Rule 100
Notice of periods of work for adult workers Name of factory........................................................................Place...............................................................District.............................................................
Date on which this notice is first exhibited: Date: Signature of Manager
Periods of work Men Women Description of groups Remarks
Groups
Total number of men employed
Total number of women employed
Group letter
Nature of work
Relays
A B C D E F G H
On working days From ... To ... From ... To ... From ... To ... On partial working days From ... To ... From ... To ...
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
![Page 101: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/101.jpg)
101 FORM 17 Prescribed under Rule 101 REGISTER OF ADULT WORKERS
Serial No
Name
Residential address
Father’s name
Nature of work
Letter of group as in Form 16
Number of relay,if working in shifts
Number and date of certificate, if an adolescent
Remarks
Number of certificate and date
Token number giving reference to the certificate
1 2 3 4 5 6 7 8 9 10
FORM 18 Prescribed under Rule 106 NOTICE OF PERIODS OF WORK FOR CHILD WORKERS Name of factory....................................................................................... Place......................................................... District.................................
Period of work
Children
Description of group
Remarks
Total number of children employed
Groups A
B
C
Group letter
Nature of work
Relays 1 2 1 2 1 2 From To
A B C
Date on which this notice is exhibited: Signature of Manager Date:
![Page 102: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/102.jpg)
102 FORM 19 Prescribed under Rule 107 REGISTER OF CHILD WORKERS FORM 20
Prescribed under Rule 108 REGISTER OF LEAVE WITH WAGES Factory: Part I—Adults Name of worker:
Department: Part II—Children Father’s name:
Note: Separate page shall be alotted to each worker.
Serial No.
Name
Residentiasl address
Father’s name
Date of first employment
Number of certificate and date
Token number giving reference to certificate
Letter or group as in Form 18
Number of relay,if working in shifts
Remarks
1 2 3 4 5 6 7 8 9 10
Serial No.
Serial No. In the Register of adult/child worker
Date of entry into service
Interrptions Leave due with effect from
Whether leave not desired during the next 12 months
Date from which the worker is allowed leave
Wages for leave paid in
Discharged worker
Remarks
Sickness and accident
Authorised leave
Lockout or legal strike
Involuntary unemployment
Others
Date of discharge
Date and amount of payment made in lieu of leave due
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
![Page 103: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/103.jpg)
103 FORM 21 Prescribed under Rule 109(1) LEAVE BOOK Factory: Name of worker: Department: Father’s name:
Serial number
Serial number in the register of adult/child workers
Date of entry into service
Interruptions
Leave due with effect from
Whether leave not desired during the next 12 months
Date from which the worker is allowed leave
Wages for leave paid in
Discharged worker
Remarks
Sickness and accident
Authorised leave
Lockout or legal strike
Involuntary unemployment
Others
Date of discharge
Date and amount of payment made in lieu of leave due
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Note: The leave book shall be made out separately for each worker on thick bound sheets. FORM 22 Prescribed under Rule 114 NOMINATION FOR PAYMENT OF PAY DUE FOR PERIOD OF HOLIDAYS IN THE EVENT OF DEATH OF WORKER I hereby require that in the event of my death before resuming work, the balance of my pay due for the period of holidays shall be paid to................................ ...................................................................................who is my...........................................................................and resides at.................................................................. ............................................................................. Witnesses: Signature or left hand thumb impression of worker. Attested: Signature: Particulars of worker such as serial number in the register Name: of adult / child workers , Section or department etc. Designation: Address Date: Signature: Name: Designation: Address:
![Page 104: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/104.jpg)
104 FORM 23 Prescribed under paragraph 8(1) of Schedule II to Rule 116 CERTIFICATE OF FITNESS Serial number....................................... Date.................................................... I hereby certify that I have personally examined Shri.......................................................................................... son of Shri.......................................................................residing at......................................................................... who is desirous of being employed as ...................................................in the..........................................................
and that his age, as nearly as can be ascertained from my examination, is.............years and that he is,in my opinion, fit for employment in.......................................................................
His descriptive marks are: Signature or left hand thumb Signature of Certifying Surgeon. Impression of the person employed. Date:
I certify that I examined the person mentioned above on
I extend this certificate until Signature of Certifying Surgeon
Note of symptoms
FORM 24 Prescribed under paragraph 9(2) of ScheduleII to Rule 116 HEALTH REGISTER
Serial No.
Departmentof works
Name of worker
Age at last birth day
Date of employment on present works
Date of leaving or transfer (with reasons for discharge or transfer)
Nature of job or occupation
Raw-material or by-product handled
Date of weekly examination with results (fit/ infit)
Nature of symptoms
Signature of registered medical practitioner
1 2 3 4 5 6 7 8 9 10 11
![Page 105: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/105.jpg)
105 FORM 25
Prescribed under paragraph 7 (2) of Schedule V to Rule 116.
Report of examination and test of DUST EXTRACTION OR SUPPRESSION System
1. Description of system:
2. Hood:— (a) Serial number of hood:
(b) Contaminant captured:
3. Total pressure drop at — (a) Joints: (b) Other points of system(To be specified):
4. Transport velocity in duct (at points along ducts to be specified):
5. Air cleaning device:—
6.Fan—
7. Fan Motor—
8. Particulars of defects,if any,disclosed during test in any of the above components: I certify that on (date)..........................................the above dust extraction system was thoroughly cleaned and ( so far as its construction permits) made accessible for thorough examination. I further certify that on the said date, I thoroughly examined the above dust extraction system including its components and fittings and that the above is a true report of my examination. Address: Signature: Qualification: Date: If employed by a company or association,name and address of the company or association: ________________________________________________________________________________________________
Design value Actual value (c) Captured velocities (at points to be specified)
(d) Volume exhausted at hood: (e) Hood static pressure:
(a) Type used (b) Velocity at inlet
(c) Static pressure at inlet
(d) Velocity at outlet
(e)Static pressure at outlet
(a) Type used (b) Volume handled
(c) Static pressure (d) pressure drop at outlet of fan
(a) Type (b) Speed and power in kilowatts
![Page 106: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/106.jpg)
106 FORM 26 Prescribed under paragraph 10 of Schedule X, paragraph 17 of Schedule XI and paragraph 12(2) 0f ScheduleXIX SPECIAL CERTIFICATE OF FITNESS Serial number: Date: I hereby certify that I have personally examined........................................................................................................... son of…………………………………...residing at........................................................who is desirous of being employed as.......................................................................in the...........................................................................and that his age,as nearly as can be ascertained from my examination, is............................................................years, and that he is,in my opinion, fit for employment at work involving the use of..................................................... His descriptive marks are: ...................................... ....................................... : Signature or left hand thumb impression of person examined : Signature of Certifying Surgeon Date:
I certify that I examined the person mentioned above on
I extend the certificate until
Signature of Certifying Surgeon
Note of symptoms of lead poisoning(if any)
FORM 27
Prescribed under paragraphs 11(1) and (7) of Scedule XIV to Rule CERTIFICATE OF FITNESS FOR DANGEROUS OPERATIONS
1. Serial number: 1. Serial number:
I certify that I have personally examined (name)................................................................................... ............................................................................son of (father’s name)................................................................................. residing at (address).................................................................... who is desirous of being employed as.................................................................................. in (name of factory)......................................................................... in (department and process)..................................................................................... and that as nearly as can be ascertained from my examination,is fit/unfit for employment at the above noted factory.
2. Name of person examined: 3.Father’s name: 4. Sex: 5. Address: 6. Name of factory in which ‘employed’/ ‘wishes to be employed’:
7. Process or Department in which ‘employed’/ ‘wishes to be employed’:
2.He is fit to be employed and may be employed on some other non-hazardous operation such as..............................................................................................
8. Whether certificate granted: 3.He may be produced for further examiination after a period of..............................................................................................
![Page 107: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/107.jpg)
1079. Whether declared unfit and certificate refused:
4.He is advised following further examination............................... ..............................................................................................
10. Reference number of previous certificate granted or refused:
5.He is advised treatment............................................................................... 6.The serial number of the previous certificate is............................................................................................
:Signature or left hand thumb :Signature or left hand thumb Impression of person examined: impression of person examined: Signature of Certifying Surgeon Signature of Certifying Surgeon Note: 1. The counterfoil should be retained by the Certifying Surgeon and maintained in a bound book or in a file. 2. The paragraph which does not apply may be cancelled. FORM 28
Prescribed under paragraph 21 (3) of Schedule XXIII of Rule116. Certificate of Fitness Serial Number: I certify that I have personally examined (name)................................................................................................., son of (father’s name) .................................................................................................., residing at (address)................................ ..................................................................................................................................who is desirous of being employed as (designation).................................................................................in (process, department and factory) ................................. ..............................................................................................................................................................and that his age, as nearly as can be ascertained from my examination,is..............................................years, and that he is, in my opinion fit/unfit for employment in the above mentioned factory as mentioned above. 2. He may be produced fro mfurther examination after a period of ........................................................ 3. The serial number of the previous certificate is................................................................... Signature or left thumb impression Signature of Certifying of the person examined Surgeon. Date............................ I certify that I examined the personmentioned above.
I extend this certificate until (if certificate is not extyended, the period for which the worker is considered unfit for work is to be mentioined)
Signs & symptoms observed during examination.
Signaturre of the Certifying Surgeon
![Page 108: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/108.jpg)
108 FORM 29 Prescribed under paragraph 21(4) of Schedule XIII to Rule 116
HEALTH REGISTER
Serial number
Department/ works
Name of worker
Sex
Age (at last birth day)
Date of employment on present work
Date of leaving or transfer to other work with reasons for discharge or transfer
Nature of job or occupation
Raw materials, products or by-products likely to be exposed to
Date of medical examination and result thereof
Signs and symptoms observed during examination
Nature of tests and result thereof
If declared unfit for works,state period of suspension with reasons in detail
Whether certificate of unfitness issued to the worker
Re-certified fit to resume duty on
Signature of Certifying Surgeon with date
Date
Result (Fit/ unfit)
1 2 3 4 5 6 7 8 9 10 11 14 15 16 17
FORM 30 Prescribed under Rule 117(3)
REPORT OF ACCIDENT OR DANGEROUS OCCURRENCE RESULTING IN DEATHOR BODILY INJURY E.SI.C. Employer’s code Number: E.S.I.C. Insurance Number of the injured person: 1. Name of Occupier (or factory / employer : 2. Address of works/premises where the accident or dangerous : occurrence took place 3. Nature of industry: 4. Branch or department and exact place where the accident or : dangerous occurrence took place. 5. Name and address of the injured person: 6.
(a) Sex :
(b) Age (at the last birth day) (c) Occupation of the injured person
7. Local E.S.I.C. Office to which the injured person is attached : 8. Date,shift and hour of accident or dangerous occurrence:
![Page 109: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/109.jpg)
109
(Form 30 Contd/-) 9.
(a) Hour at which the injured person started work on the day of accident or dangerous occurrence:
(b) Whether wages in full or part are payable to him for the day of the accident or dangerous occurrence:
10. (a) Cause or nature of accident or dangerous occurrence : (b) If caused by machinery— (i) give the name of machine and the part causing the : accident or dangerous occurrence. (ii) state whether it was moved by mechanical power : at the time of accident or dangerous occurrence. (c) State exactly what the injured person was doing at : the time of accident or dangerous occurrence. (d) In your opinion, was the injured person at the time of accident or dangerous occurrence— (i) acting in contravention of provisions of any law applicable to him: (ii) acting in contravention of any orders given by or on behalf of his employer : or,(iii) acting without instructions from his employer? : (e) In case reply to d (i),(ii) or (iii) is in affirmative, state whether the act wasdone for the purpose of and in connection with the employer’s trade or business:
11. In case the accident or dangerous occurrence took place while travelling in the employer’s transport,state whether— (a) the injured person was travelling as a passenger to or from his place of work: (b) the injure person was travelling with the express or implied permission of his employer: (c) the transport being operated by or on behalf of the employer or some other person by whom it is provided in pursuance of arrangement made with the employer: (d) the vehicle is being/not being operated in the ordinary course of public transportr service.
![Page 110: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/110.jpg)
110
FORM 31 Prescribed under Rule 117(3) REPORT OF DANGEROUS OCURRENCE WHICH DOES NOT RESULT IN DEATH OR BODILY INJURY 1. Name and address of factory: 2. Name of Occupier: 3. Name of Manager: 4. Nature of industry: 5. Branch or department and exact place :
where the dangerous occrrence took place. 6. Date and hour of dangerous occurrence: 7. Nature of dangerous occurrence (State exactly what happened) : I certify that to the best of my knowledge and belief the above particulars are correct in every respect. Name,designation and address of Manager: Signature of Manager: Date of dispatch of report: ______________________________________________________________________________________________ (To be completed by the Inspector of Factories) District: Date of receipt: Number of the dangerous occurrence: Date of investigation: Causation: Result of investigation: FORM 32 Prescribed under Rule 118 NOTICE OF POISONING OR DISEASE (See instructions on the reverse)* 1. Name of factory: 2. Address of factory: 3. Address of office of occupier: 4. Residential address: 5. Nature of industry : 6. (a) Name of patient: (b) Works number of patient: (c) Address of patient: 7. Precise occupation of patient: 8. Nature of poisoning or disease from which patient is suffering: 9. Has the case been reported to the Certifying Surgeon? Signature of Manager: Date: ______________________________________________________________________________________________ (To be filled in by the Chief Inspector) Number of the case: Remarks: * Notice of poisoning or disease Extract from the Factories Act,1948 (Section 89) Where any worker in a factory contracts any disease specified in the Schedule,the manager of the factory shall send a notice thereof to such authorities, and in such Form and within such time, as may be prescribed.
![Page 111: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/111.jpg)
111 SCHEDULE LIST OF NOTIFIABLE DISEASES
1. Lead poisoning including poisoning by any preparation of lead or their sequelae.
12. Silicosis.
2. Lead tetra-ethyl poisoning. 13. Poisoning by halogens or halogen derivatives of the hydrocarbons of the aliphatic series.
3. Phosphorus poisoning or its sequelae. 14. Pathological manifestations due to— (a) radium or other radio-active substances; and (b) X-rays.
4. Mercury poisoning or its sequelae. 15. Primary epitheliomatous cancer of skin. 5. Manganese poisoning or its sequelae. 16. Toxic anaemia. 6. Arsenic poisoning or its sequelae. 17.Toxic jaundice due to poisonous substances. 7. Poisoning by nitrous fumes. 18. Oil acne or dermititis due to mineral oils and
compounds containing mineral oil base. 8. Carbon bisulphide poisoning. 19. Byssinosis. 9. Benzene poisoning, including poisoning by any of its homologues, their nitro or amino derivatives or its sequelae.
20. Asbestosis.
10. Chrome ulceration or its sequelae. 21. Occupational or contact dermatitis caused by direct contact with chemicals and paints. These are of two types ,that is,primary irritants and allergic sensitizers.
11. Anthrax. 22. Noise induced hearing loss (exposure to high noise level)
EXTRACT FROM THE MEGHALAYA FACTORIES RULES,1980 (RULE 118) A notice in Form 32 should be sent forthwith both to the Chief Inspector and to the Certifying Surgeon,by the Manager of factory in which there occurs a case of lead, phosphorus, mercury, manganese, arsenic, carbon bisulphide or benzene poisoning; or of poisoning by nitrous fumes or by halogens or halogen derivatives of the hydrocarbons of aliphatic series; or of chrome ulceration, anthrax, silicosis, toxic anaemia,toxic jaundice, primary epitheliomatous cancer of skin, or of pathological manifestations due to radium or other radio-active substances or X-rays. _________________________________________________________________________________________________ FORM 33 Prescribed under Rule120
ABSTRACTS OF THE FACTORIES ACT, 1948 AND THE MEGHALAYA FACTORIES RULES, 1980. (To be affixed in a conspicuous and convenient place at or near the main entrance to the factory) Interpretation 1. “Factory” means any premises including the precincts thereof— (i) Whereon ten or more workers are working, or were working on any day of the preceeding twelve months, and in any part of which a manufacturing process is being carried on with the aid of power, or is ordinarily so carried on, or (ii) Whereon twenty or more workers are working, or were working onany day of the preceding twelve months and in any part of which a manufacturing process is being carried on without the aid of power, or is ordinarily so carried on, but does not include a mine subject to the operation of the Mines Act,1952 (35 of 1952), or a mobile unit belonging to the armed forces of the Union, a railway running shed or a hotel, restaurant or eating place. Explanation:— For computing the number of workers for the purposes of this clause all the workers in different relays in a day shall be taken into account. 2. “Worker” means a person employed, directly or through any agency (including a contractor) with or without the knowledge of the principal employer, whether for remuneration or not, in any manufacturing process, or in cleaning any part of the machinery or premises used for a manufacturing process, or in any other kind of work incidental to, or connected with the manufacturing process, or the subject of the manufacturing process; but does not include any member of the armed forces of the Union. 3. “Manufacturing process” means any process for:— (i) making,altering,repairing,ornamenting,finishing,packing,oiling,washing,cleaning,breaking up,demolishing or otherwise treating or adapting any article or substance with a view to its use, sale,transport,delivery or disposal; or (ii) pumping oil,water,sewage or any other substance; or
![Page 112: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/112.jpg)
112 (iii) generating,transforming or transmitting power; or
(iv) composing types of printing, printing by letter press lithography,photogravure or other similar process or book- binding; or
(v) constructing, reconstructing, repairing, refitting, finishing or breaking up ships or vessels; or (vi) preserving or storing any article in cold storage. Working hours,holydays, intervals after rest etc. 4. Hours of work for adults (Section51 and 54): No adult worker shall be required or allowed to work in a factory for more than 48 hours in any week and for more than 9 hours in any day 5. Relaxation of hours of work for adults (Section 64): The ordinary limit on working hours of adults may be relaxed in certain special cases, e.g., workers engaged on urgent repairs; in work in the nature or preparatory or complementary work which must necessarily be carried on outside the limits laid down for the general working of the factory; in work which is necessarily so intermittent that the intervals during which they do not work while on duty ordinarily amount to more than the intervals for rest; in any work which for technical reasons must be carried on continuously; in making or supplying articles of prime necessity which must be made or supplied every day; in a manufacturing process which cannot be carried on except during fixed seasons, or at times dependent on the irregular action of natural forces; in engine rooms or boiler houses or in attending to power plant or transmission machinery; in the printing of newspapers, who are held up on account of the breakdown of machinery; in the loading or unloading of railway wagons or lorries or trucks; or in any work which is notified by the State Government in the Official Gazette as a work of national importance. Except in the case of urgent repairs the relaxastion shall not exceed the following limits of work inclusive of overtime:— (i) the total number of hours of work in any day shall not exceed ten; (ii) the spread over, inclusive of intervals for rest, shall not exceed twelve hours in any one day; (iii) the total number of hours of work in a week, including overtime, shall not exceed sixty; (iv) the total number of hours of overtime work shall not exceed fifty for any quarter. 6. Payment of overtime (Section 59) : Where a worker works in a factory for more than nine hours in any day or for more than 48 hours in any week, he shall in respect of overtime work, be entitled to wages at the rate of twice his ordinary rate of wages. 7. Exemption of supervisory staff (Section 64) : Chapter VI, other than the provisions of clause (b) of sub-section (1) of Section 66 and of the provision to that sub-section of the Act― Working hours of adults does not apply to persons holding positions of supervision or management or are employed in a confidential position in a factory, provided that where the ordinary rate of wages of such persons does not exceed rupees seven hundred and fifty per month, they are entitled to extra wages in respect of overtime work under Section 59. 8. Weekly holidays (for adults; Section 52) : No adult worker shall be required or allowed to work in a factory on the first day of the week unless― (a) he has, or will have, a holiday for a hole day on one of the three days immediately before or after the said day; and (b) the manager of the factory has, before the said day or the substituted day under clause (a) whichever is earlier― (i) delivered a notice at the office of the Inspector of his intention to require the worker to work on the said day and of the day which is to be substituted; and (ii) displayed a notice to that effect in the factory; Provided that no substitution shall be made which will result in any worker working for more than ten days consecutively without a holiday for a whole day. 9. Compensatory holidays (Section 53): Where a worker in a factory, as a result of exemption from the ordinary provision relating to weekly holidays, is deprived of any of the weekly holidays, he shall be allowed, within the months in which the holidays were due to him or within the two months immediately following that month, compensatory holidays of equal number of the hloidays so lost. 10. Intervals for rest for adults (Section 55 and 56): The periods of work for adult workers in a factory each day shall be so fixed that no period shall exceed 5 hours and that no worker shall work for more than 5 hours before he has had an interval for rest of at least half an hour and that inclusive of intervals for rest they shall not spread over more than ten and a half hours in any day or, with the permission of the Chief Inspector inwriting, 12 hours. 11. Prohibition of double employment (Sections 60,71 and 99): No child or except in certain circumstances, an adult worker, shall be required or allowed to work in any factory on any day on which he has already been working in any other factory If a child works in a factory on any day on which he has already been working in another factory, the parent or guardian of the child or the person havimg custody of or control over him or obtaining any direct benefit from his wages, shall be punishable with fine, which may extend to Rs. 50 unless it apears to the court that the child so worked without the consent or connivance of such parent, guardian or person. 12. Prohibition of employment of children under 14 (Section 67): No child who has not completed his fourteenth year shall be required or allowed to work in any factory.
![Page 113: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/113.jpg)
11313. Hours of work for children ( Section 71): No child shall be employed or permitted to work in any factory for more than four and a half hours in any day during the period of at least twelve consecutive hours which shall include the interval between 10 p.m. and 6 a.m. The periods of work of all children emploed in a factory shall be limited to two shifts which shall not overlap or spread over more than five hours each and each child shall be employed in only one of the relays. The provision relating to weekly holidays shall also apply to child workers and no exemption from this provision may be granted in respect of any child. 14. Prohibition of employment of women (Section 66): No women worker shall be required or allowed to work in any factory except between the hours of 6 a.m. and 7 p.m. The State Government may vary these limits or exempt this restriction in case of women working in fish-curing or fish-canning factories.
LEAVE WITH WAGES 15. Leave with wages (Sections 79,80 and 83 and Rules): Every worker who has worked for a period of 240 days or more in a factory during a calendar year shall be allowed during the subsequent calendar year leave with wages for a number of days calculated at the rate of:— (i) if an adult, one day for every twenty days of work performed by him during the previous calendar year; and (ii) if a child, one day for every 15 days of work performed by him during the prervious calendar year. Explanation (1):— For the purpose of this sub-section:— (a) any days of lay off by agreement of contract or as permissible under the standing orders; (b) in the case of female worker, maternity leave for any number of days not exceeding twelve weeks; and (c) the leave earned during the year prior to that in which the leave is enjoyed;— shall be deemed to be days on which the worker has worked in a factory for the purpose of computation of the period of 240 days or more, but he shall not earn leave for these days. Explanation (2):— The leave admissible under this sub-section shall be exclusive of all holidays whether occuring during or at either end of the period of leave. For the leave allowed to him, a worker shall be paid at a rate equal to the daily average of his total full-time earnings, for the days in which he actually worked during the month immediately preceding the leave exclusive of any overtime and bonus but inclusive of dearness allowance and the cash equivalent of the advantage accruing through the concessional sale to the worker of food grains and other articles. A worker whose service commences otheerwise than on the first day of January shall be entitled to leave with wages at the rate indicated above, if he has worked for two-thirds of the total number of days in the remainder of the calendar year. If a worker is discharged or dismissed from service or quits his employment or is suprerannuated or dies while in service, during the course of the calendar year, he or his heir or nominees as the cae may be, shall be entitled to wages in lieu of the quantum of leave to which he was entitled immediately before hs discharge, dismissal, quitting of employment, superannuation or death, calculated at the rates specified above even if he had not worked for the entire period specified above. Such payment shall be made— (i) whether the worker is discharged or dismissed or quits employment, before the expiry of the second working day from the day of such discharge, dismissal or quitting; and (ii) where the worker is superannuated or dies while in service, before the expiry of two months from the date of such superannuation or death. If the employment of a worker who is entitled to leave with wagews is terminated by the occupier before he has taken the ( entire leave to which he is entitled, or if having applied for and) having not been granted such leave, the worker quits his employment before he has taken the leave, the occupier of the factory shall pay him the amount payable in respect of the leave not taken, and such payment shall be made before the expiry of the second working day after the day on which his employment is terminated and a worker who quits his employment, on or before the next pay day. The manager shall maintain a register of leave with wages in the prescribed Form 20 and shall provide each worker with a book called the “Leave Book” in the prescribed Form 21. The leave book shall be the property of the worker and the manager or his agent shall not demand it except to make entries of the dates of holidays or interruptions in service and shall not keep it for more than a week at a time. If a worker loses his leave book, the manager shall provide him with another copy on payment of paise fifty and shall complete it from his record.
HEALTH 16. Cleanliness (Section11): Except in cases specially exempted, all inside wqalls and partitions, all ceilings or tops of rooms and all walls, sides and tops of passages and staircases in a factory shall be kept whitewashed or colour washed. The white washing or colour washing shall be carried out at least once in every period of fourteen months. The floor of every work room shall be cleaned at least once in every week by washing using disinfectant where necessary or by some other effective method. 17. Disposal of wastes and effluents (Section12): Effective arrangements shall be made in every factory for the treatment of wastes and effluents due to the maqnufacturing process carried on therein, so as to render them innocuous and for their disposal.
![Page 114: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/114.jpg)
114 18. Ventilation and temperature (Section13): Effective and suitable provision shall be made in every factory for securing and maintaining in every work room adequate ventilation by the circulation of fresh air and such a tempertature as will secure to workers therein reasonable conditions of comfort and prevent injury to health. 19. Overcrowding (Section 16) : Unless exemption has been granted there shall be in every work room of factory in existence on the date of commencement of this Act at least 350 cubic feet and of a factory built after the commencement of this Act at least 500 cubic feet of space for every worker employed therein, and for this purpose no account shall be taken of any space which is more than 14 feet above the level of the floor of the room. 20. Lighting (Setion 17): In every part of a factory where workers are working or passing , there shall be provided and maintained sufficient and suitable lighting, natural or artificial or both. 21. Drinking water (Section 18 and Rules) : In every factory effective arrangements shall be made to provide and maintain at suitable points conveniently situated for all workers employed therein, a sufficient supply of wholesome drinking water. In every factory wherein more than 250 workers are ordinarily employed the drinking water shall, during hot weather, be cooled by ice or other effective methods.The cooled drinking water shall be supplied in every canteen, lunch room and rest room and also at conveniently accessible points throughout the factory. 22. Latrines and urinals (Section 19 and Rules) : Inevery factory sufficient latrine and urinal accommodation of the prescribed types (separate enclosed accommodation for male and female workers) shall be provided conveniently situated and accessible to workers at all times while they are at the factory. Every latrine shall be under cover and so partitioned off as to secure privacy and shall have a proper door and fastenings. Sweepers shall be employed whose primary duty would be to keep clean latrines,urinals and washing places. 23. Spitttoons (Section 20) : In every factory there shall be provided a sufficient number of spittoons of the type prescribed in convenient places and they shall be maintained in a clean and hygienic condition. No person shall spit within the premises of a factory except in the spittoons provided for the purpose. Whoever spits in contravention of this provision shall be punishable with fine not exceeding five rupees. SAFETY 24. Fencing of machinery (Section 21) : In every factory dangerous parts of machinery e.g. every moving part of a prime mover and every flywheel connected to a prime mover etc. shall be securely fenced by safe guards of substantial construction which shall be constantly maintained and kept in position while the parts of machinery they are fencing are in motion or in use. 25. Work on or near machinery in motion (Section 22) : No woman or young person shall be allowed in any factory to clean , lubricate or adjust any part of a prime mover or any transmission machinery while the prime mover or the transmission machinery is in motion, or to clean, lubricate or adjust any part of machine if the cleaning ,lubrication or adjustment thereof would expose the woman or young person to risk of injury from any moving part either of that machine or of any adjacent machinery. 26. Employment of young persons on dangerous machines (Section 23) : No young person shall work at any machine declared to be dangerous unless he has been fully instructed as to the dangers arising in connection with the machine and the precautions to be observed and has received sufficient training in work at the machine or is under adequate supervision by a person who has a thorough knowledge and experience of the machine. 27. Casing of new machinery (Section 26) : In all machinery driven by power and installed in any factory after the commencement of this Act, every set screw, bolt or key on any revolving shaft,spindle, wheel or pinion shall be so sunk,encased or otherwise effectively guarded as to prevent danger; all spur, worm and other toothed or friction gearing which does not require frequent adjustment while in motion shall be completely encased, unless it is so situated as to be as safe as it would be if it were completely encased. Whoever sells or lets on hire or , as agent of a seller or hirer, causes or procures to be sold or let on hire, for use in a factory any machinery driven by power which does not comply with these provisions or any rules made under this section, shall be punishable with imprisonment for a term which may extend to three months or with fine which may extend to five hundred rupees or with both. 28. Prohibition of employment of women and children near cotton openers (Sedction 27) : No woman or child shall be employed in any part of a factory for pressing cotton in which a cotton opener is at work. 29. Excessive weights (Section 34 and Rules) : No man,woman or young person shall, unaided by another person lift,carry or move by hand or on head, any material, article, tool or appliance exceeding the maximum limit in weight set out in the following schedule:-
![Page 115: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/115.jpg)
115 SCHEDULE
PERSON MAXIMUM WEIGHT OF MATERIAL, ARTICLE, TOOL OR APPLIANCE
(a) Adult male 55 Kilograms (b) Adult female 30 Kilograms (c) Adolescent male 30 Kilograms (d) Adolescent female 20 Kilograms (e) Male child 16 Kilograms (f) Female child 14 Kilograms
30. Protection of eyes (Section 35 and Rules) : Effective screens or suitable goggles shall be provided for the protection of persons employed in or in the immediate vicinity of processes which involve risk of injury to eyes from particles or fragments thrown off in the course of the processes or which involve risk of injury to eyes by reason of exposure to excessive light or infra-red or ultra-violet radiations. 31. Precautions in case of fire (Section 38 and Rules) : Every factpry shall be provided with adequate means to escape in case of fire for the persons employed therein. The doors effording exit from any room shall, unless they are of the sliding type, be constructed to open outwards. Every window, door or other exit affording a means of escape in case of fire, other than the means of exit in ordinary use, shall be distictively marked. Effective and clearly audible means of giving warning in case of fire to every person employed in the factory shall be provided. Effective measures shall be taken to ensure that wherein more than twenty workers are ordinarily employed in any place above the ground floor, or wherein explosive or highly inflammable materials are used or stored, all the workers are familiar with the means of escape in case of fire and have been adequately trained in the routine to be followed in such case. WELFARE 32. Washing facilities (Section 42 and Rules) : In every factory adequate and suitable facilities for washing shall be provided and maintained for the use of the workers therein. Such facilities shall include soap and nail brushes or other suitable means of cleaning and the facilities shall be conveniently accessible and shall be kept in a clean and orderly condition. If female workers are employed, separate washing facilities shall be provided and so enclosed or screened that the interiors are not visible from any place where persons of the other sex work or pass. 33. Facilities for storing and drying clothing (Section 43 and Rules) : In the case of certain dangerous operations e.g., lead processes, liming and tanning of raw hides and skins etc., suitable places for keeping clothing not worn during working hours and for the drying of wet clothing shall be provided and maintained. 34. Facilities for sitting (Section 44) : In every factory suitable arrangements for sitting shall be provided and maintained for all workers obliged to work in a standing position in order that they may take advantage of any opportunities for rest which may occur in the course of their work. 35. First-aid and ambulance room (Section45) : There shall in every factory be provided and maintaine as to be readily accessible during all working hours first-aid boxes or cup-boards equipped with the prescribed contents. Each first-aid box or cup-board shall be kept in the charge of a separate responsible person who holds a certificate in first-aid treatment recognised by the State Government who shall always be available during the working hours of the factory. In every factory wherein more than 500 workers are ordinarily employed there shall be provided and maintained an ambulance room of the prescribed size, containing the prescribed equipment, and in the charge of such medical and nursing staff as may be prescribed and those facilities shall alwaya be made readily available during the working hours of the factory. 36. Canteens (Section 46 and Rules) : In specified factories wherein more than 250 workers are ordinarily employed, a canteen or canteens shall be provided and maintained by the occupier for the use of the workers. Food, drink and other items served in the canteen shall be sold on a non-profit basis and the prices charged shall be subject to the approval of a Canteen Managing Committee which shall be appointed by the Manager and shall consist of an equal number of persons nominated by the occupier and elected by the workers. The number of elected workers shall be in the proportion of 1 for every 1000 workers employed in the factory, provided that in no case shall there be more than 5 or less than 2 workers on the committee. The committee shall be consulted from time to time as to the quality and quantity of food-staffs to be served in the canteen, the arrangement of the menus etc. Where the canteen is managed by a co-operative society it is not necessary to appoint a Canteen Managing Committee and the prices to be charged may include a margin of profit upto a maximum of 5% of its working capital. 37. Shelters, rest rooms and lunch rooms (Section 47) : In every factory wherein more than 150 workers are ordinarily employed, adequate and suitable lunch room, with provision of drinking water, where workers can eat meals brought by them, shall be provided and maintained for the use of the workers.
![Page 116: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/116.jpg)
116 38. Creches (Section 48 and Rules) : In every factory wherein more than 30 women workers are ordinarily employed there shall be provded and maintained a suitable room or rooms for the use of children under the age of six years of such women. The creche shall be adequately furnished and equipped and in particular there shall be one suitable cot or a cradle with the necessary beddding for each child, at least one chair or equivalent sitting accommodation for the use of each mother while she is feeding or attending to her child, and a sufficient supply of suitable toys for older children. There shall be in or adjoining the creche a suitable wash room for the washing of the children and their clothing. An adequate supply of clean clothes, soap and clean towels shall be made available for each child while it is in the creche. At least a quarter litre of clean pure milk shall be available for each child on every day it is accommodated in the creche and the mother of such a child shall be allowed in the course of her daily work suitable intervals to feed the child. For children above two years of age, there shall be provided, in addition, an adequate supply of wholesome refreshment. Asuitably fenced and shady open air play ground shall also be provided for the older children. . 39. Welfare Officers (Section 49) : In every factory wherein 500 or more workers are ordinarily employed the occupier shall employ in the factory such number of Welfare Officers as may be prescribed. SPECIAL PROVISIONS 40. Dangerous operations (Section 87 and Rules) : Employment of women, adolescents and children is prohibited or restricted in certain operations declared to be dangerous e.g., electroplating,manufacture and repair of electric accumulators, glass manufacture, grinding or glazing of metals, manufacture and treatment of lead and certain compounds of lead, sand blasting etc. 41. Notice of accidents (Section 88 and Rules) : When an accident occurs which results in the death of any person or which results in such bodily injury to any person as is likely to cause his death, or any dangerous occurrence specified in the schedule annexed hereto takes place in a factory, the Manager of the factory shall forthwith send a notice thereof by telephone, special messenger or telegram to the Inspector and the Chief Inspector. When any accident or any dangerous occurrence specified in the schedule annexed hereto, which results in the death of any person or which results in such bodily injury to any person as is likely to cause his death, takes place in a factory, forthwith notice shall be sent also to the District Magistrate or Sub-divisional Officer, to the Officer-in-charge of the nearest police station; and to the relatives of the injured or deceased person. SCHEDULE 1. Bursting of a plant used for containing or supplying steam under pressure greater than the atmospheric pressure. 2. Collapse or failure of a crane, derrick, winch, hoist or other appliances used in raising or lowering persons or
goods, or any part thereof, or the overturning of a crane. 3. Explosion, fire,bursting out, leakage or escape of any molten metal, or hot liquor or gas causing bodily injury to any
person or damage to any room or place in which persons are employed or fire in rooms of cotton pressing factories when a cotton opener is in use.
4. Explosion of a receiver or container used for the storage at a pressure greater than the atmospheric pressure of any gas or gases (including air) or any liquid or solid resulting from the compression of gas.
5. Collapse or subsidence of a floor, gallary, roof, bridge, tunnel, chimney, wall, building or any other structure. 42. Notice of certain diseases (Section 89 and Rules) : Where any worker in a factory contracts any of the following diseases, the Manager of the factory shall send notice in Form 32 thereof forthwith both to the Chief Inspector and the Certifying Syrgeon— Lead, phosphorus, mercury, manganese, arsenic, carbon bisulphide or benzene poisoning; or poisoning by nitrous fumes or by halogens or halogen derivatives of the hydrocarbons of the aliphatic series; or of chrome ulceration, anthrax, silicosis, toxic aneamia, toxic jaundice, primary epithelimatous cancer of the skin, or pathological manifestations due to radium or other radio-active substsances or X-rays. 43. No charge for facilities and convenience (Sectio 114) : No fee or charge shall be realised from any worker in respect of any arrangements or facilities to be provided or any equipments or appliances to be supplied by the occupier under the provisions of this Act. 44. Powers of Inspectors (Sections 9 and 82) : Inspectors have powers to inspect factories any time and may require the production of registers,certificates etc. ,prescribed under the Acts and the Rules. Any Inspector may institute proceedings on behalf of any workers to recover any sum required to be paid by an employer under the provision relating to Leave with Wages, which the employer has not paid.
![Page 117: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/117.jpg)
11745. Obligations of workers (Sections 97 and 111) : No worker in a factory— (i) shall wilfully interfere with or misuse any appliance, convenience or other thing provided in a factory for the purposes of securing the health, safety or welfare of the workers therein; (ii) shall wilfully and without any reasonable cause do anything likely to endanger himself or others; and (iii) shall wilfully neglect to make use of any appliance or other thing provided in the factory for the purpose of securing the health or safety of the workers therein. If any worker employed in a factory contravenes any of these provisions or any rule or order made thereunder,he shall be punishable with imprisonment for a term which may extend to three months, or with fine which may extend to Rs. 100, or with both. If any worker employed in a factory contravenes any provision of this Act or any rule or order made thereunder, imposing any duty or liability on workers, he shall be punishable with fine which may extend to Rs. 20. 46. Certificate of fitness (Sections 69, 70 and 98) : No child who has completed his fourteenth year or an adolescent shall be required or allowed to work in any factory unless a certificate of fitness granted with reference to him is in the custody of the manager of the factory and such child or adolescent carries, while he is at work, a token giving a reference to such certificate. Any fee payable for such a certificate shall be paid by the occupier and shall not be recoverable from the young person, his parents or guardian. An adolescent who has been granted a certificate of fitness to work in a factory as an adult and who while at work in a factory carries a token giving reference to the certificate shall be deemed to be an adult for all the purposes of the provisions of the Act relating to the working hours of adults and the employment of young persons.An adolescent who has not been granted a certificate of fitness to work in a factory as an adult shall, notwithstanding his age, be deemed to be a child for all the purposes of this Act. Whoever knowingly uses or attempts to use, as a certificate of fitness granted to himself, a certificate granted to another adolescent to work in a factory as an adult, or who having procured such a certificate knowingly allows it to be used, or an attempt to use it to be made, by another person, shall be punishable with imprisonment with a term which may extend to one month or with fine which may extend to Rs. 50 or with both. 47. Registers, notices and returns (Sections 61,62, 63, 72, 73, 74 asnd 110 and Rules) : A register of adult workers in the prescribed Form 17 and a register of child workers in the prescribed Form 19 shall be maintained by the manager of every factory. A notice of periods of work for adults and a notice of periods of work for children in the prescribed Forms 16 and 18 shall be correctly maintained and displayed in every factory. No adult worker or child shall be required or allowed to work in any factory otherwise than in accordance with their respective notices of periods of work displayed in the factory. The owners, occupiers or managers of factories shall submit the prescribed periodical returns to the Inspector regularly. FORM 34 Prescribed under Rule 121(a) Annual Return For the year ending 31st December, 20.... 1. Registration number of the factory : 2. Name of the Factory: 3. Name of occupier: 4. Name of manager: 5. District: 6. Full postal address of the factory: 7. Nature of industry: Number of workers and particulars of employment 8. No. Of days worked during the year: 9. No. Of man-days worked during the year:
(a) Men: (b) Women: (c) Children: 10. Average number of workers employed daily (See explanatory note) :
(a) Adults (b) Adolescents (c) Children (i)Men: (ii)Women: (i)Male: (ii)Female: (i)Male: (ii)Female:
11. Total No. of man-hours worked including overtime:
(a) Men: (b) Women: (c) Children: 12. Average number of hours worked per week (see explanatory note):
(a) Men: (b) Women: (c) Children: 13. (a) Does the factory carry out any process or operationa declared as dangerous under Section 87 (see Rule 116): (b) If so, give the following information:
![Page 118: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/118.jpg)
118
Name of the dangerous process or operations carried on
Average No. of persons employed daily in each of the processes or operations given in col. 1
1 2 i) ii) iii) etc.
Leave with wages 14. Total number of workers employed during the year:
(a)Men: (b)Women: (c)Children: 15. Number of workers who were entitled to annual leave with wages during the year:
(a)Men: (b)Women: (c)Children: 16. Number of workers who were granted leave during the year:
(a)Men: (b)Women: (c)Children: 17. (a) Number of workers who were discharged or dismissed from service or quit : employment or were superannnuated or died while in service during the year (b) Number of such workers in respect of whom wages in lieu of leave were paid : 18. (a) Number of Safety Officers required to be appointed as per notification under Sectioin 40-B : (b) Number of Safety Officers appointed : Ambulance room 19. Is ther any ambulance room provided in the factory as required under Section 45 ? : Canteen 20. (a) Is there a canteen provided in the factory as required under Section 46 ? : (b) Is the canteen provided/ managed:
(i) departmentally, or (ii) through a contractor ?
Shelters or Rest Rooms and Lunch Rooms 21. (a) Are there adequate and suitable shelteers or rest rooms : provided in the factory as required under Section 47 ? (b) Are there adequate and suitable lunch rooms provided : in the factory as required under Section 47 ? Crecheches 22. Is there a creche provided in the factory as required under Section 48? : 23. (a) Number of Welfare Officers to be appointed as required under Section 49: (b) Number of Welfare Officers appointed : Accidents 24. (a) Total number of accidents (see explanatory notes) :
(i) Fatal: (ii) Non-fatal: (b) Accidents in which workers returned to work during the year to which this return relates:
(i)Accidents (workers injured) occuring during the year in which workers returned to work during the same year : (aa) Number of accidents: (bb) Man-days lost due to accidents:
(ii)Accidents (workers injured) occuring in the previous year in which injured workers returned to work during the year in which this return relates (aa) Number of accidents: (bb) Man-days lost due to accidents:
![Page 119: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/119.jpg)
119 (c) Accidents (workers injured) occuring during the year in which injured workers did not return to work during the year to which the return relates:
(i) Number of accidents: (ii) Man-days lost due to accidents: Certified that the information furnished above is to the best of my knowledge and belief,correct. Signature of the manager Date: _________________________________________________________________________________________________ Explanatory Notes: 1. The average number of workers employed daily should be calculated by dividing the aggregate number of attendance on working days (i.e., man-days worked by the number of working days in the year. In reckoning attendance, attendance by temporary as well as permanent employees should be counted, and all employees should be included, whether they are employed directly or under contractors. Attendance on separate shifts (e.g. night and day shifts) should be counted separately. Days on which the factory was closed for whatever cause, and days on which the manufacturing processes were not carried on should not be treated as working days. Partial attendance for less than half a shift on a working day should be ignored, while attendance for half a shift or more on such day should be treated as full attendance. 2. For seasonal factories, the average number of workers employed during the working season and the off-season FORM 35 Prescribed under Rule 121 (b) HALF-YEARLY RETURN For the half-year ending 30th June, 20......./ 31st December 20...... 1. Registration number of factory : 2. Name of factory : 3. Name of occupier : 4. Name of manager : 5. District : 6. Postal address of factory : 7. Nature of industry : 8. Average number of workers employed daily:—
(a) Adults (b) Adolescents (c) Children (i)Men: (ii)Women: (i)Male: (ii)Female: (i)Male: (ii)Female:
9. Number of days worked during the half-year ending 30 th June, 20....../ : 30th December, 20...... : Signature of manager Date: ______________________________________________________________________________________________ Explanatory Note: The average daily number should be calculated by dividing the aggregate number of attendances on working days by the number of working days during the half-year. In reckoning attendances by temporary as well as permanent employees should be counted and all employees should be included whether they are employed directly or under contractors. Attendances on separate shifts (e.g., night and day shifts) should be counted separately. Days on which the factory was closed, for whatever cause, and days on which the manufacturing processes were not carried on should not be treated as working days. Partial attendance for less than half a shift on a working day should be ignored, while attendance for a half a shift or more on such day should be treated as full attendance. ______________________________________________________________________________________________
![Page 120: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/120.jpg)
120 FORM 36 Prescribed under Rule124 MUSTER ROLL Name of factory: Place: District:
should be given separately. Similarly, the number of days worked and average number of man-hours worked per week during the working and off-season should be given separately. 3. The average number of hours worked per week means the total actual hours worked by all workers during the year excluding the rest intervals but including overtime work divided by the product of total number of workers employed in the factory during the year and ‘52’. Incase the factory has not worked for the whole year, the number of weeks during which the factory worked should be used in place of the figure ‘52’. 4. Every person killed or injured should be treated as one separate incident. If in one occurrence six persons were injured or killed, it should be counted as six accidents. 5. In item 24(a), the number of accidents which took place during the year should be given. In case of non-fatal accidents only those accidents which prevented workers from working for 48 hours or more, should be indicated. ________________________________________________________________________________________________ FORM 37 Prescribed under Rule 125 REGISTER OF ACCIDENTS AND DANGEROUS OCCURRENCES Name of injured person (if any)
Date of accident or dangerous occurrence
Date of report (in Form 30) to Inspector
Nature of accident or daqngerous occurrence
Date of return of injured person to work
Number o days the injured person was absent from work
1 2 3 4 5 6
Serial No.
Name of worker
Father’s name
Nature of work
Daily attendance for the month of....................20........
Remarks
1 2 3 4 5 6 7 8 9 . . . . . .
![Page 121: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/121.jpg)
121 ANNEXURE II (Schedules under rule 116) —:CONTENTS:—
Sl. No. Schedule No. and title
Page No.
I Manufacture of aerated water and processes incidental thereto 122 II Electrolyting plating or oxidatioin of metal articles by use of electrolyte containing acids,bases or salts
of metals such as chromium, nickel, cadmium,zinc, copper, silveer, gold etc. 122
III Manufacture and repair of electric accumulators. 124 IV Glass manufacture 126 V Grinding or glazing of metals 128 VI Manufacture and treatment of lead and certain compounds of lead 129 VII Generating petrol gas from petrol 131 VIII Cleaning or smoothing, roughening etc. Of articles by a jet of sand, metal shot or grit or other abrasive
propelled by a blast of compressed air or steam 131
IX Liming and tanning of raw hides and skins and processes incidental thereto 133 X Certain lead processes carried on in printing presses and type foundries 135 XI Manufacture of pottery 136 XII Chemical works 138 XIII Manipulation of stone or any other material containing free silica 148 XIV Handling and processing of asbestos, manufacture of any article of asbestos and any other process of
manufacture or otherwise in which asbestos is used in any form 149
XV Handling or manupulation of corrosive substances 152 XVI Processing of cashewnut 153 XVII Compression of oxygen and hydrogen produced by the electrolysis of water 154 XVIII Process of extracting oils and fats from vegetable and animal sources in solvent extraction plants 155 XIX Manufacture or manupulation of manganese and its compounds 156 XX Manufacture or manupulation of dangerous pesticides 158 XXI Manufacture, handling and usage of benzene and substances containing benzene. 161 XXII Manufacture, process or operations in carbon disulphide plants 163 XXIII Manufacture or manupulation of carcenogenic dye intermediates 165 XXIV Operations involving high noise level 167 XXV Manufacture of Rayon by Viscose Process 169 XXVI Highly flammable liquids and flammable compressed gases 171 XXVII Operations in foundries 172
********************************************************************************************
![Page 122: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/122.jpg)
122 SCHEDULE I
MANUFACTURE OF AERATED WATERS AND PROCESSES INCIDENTAL THERETO
1. Fencing of machines : All machines for filling bottles or syphons shall be so constructed, placed or fenced, as to prevent as far as may be practicable, a fragmant of a bursting bottle or syphon from striking any person employed in the factory. 2. Face guards and gauntlets: (1) The occupier shall provide and maintain in good condition for the use of all persons engaged in filling bottles or syphons— (a) suitable face guards to protect the face, neck and throat; and (b) suitable gauntlets for both arms to protect the whole hand and arms; Provided that paragraph 2(1) shall not apply where bottles are filled by means of an automatic machine so constructed that no fragment of a bursting bottle can escape; Provide further that where a machine is so constructed that only one arm of the bottle at work upon it is exposed to danger a gauntlet need not be provided for the arm which is not exposed to danger. (2) The occupier shall provide and maintain in good condition for the use of all persons engaged in corking, crowning, screwing, wiring, foiling, capsuling, sighting or labelling bottles or syphons— (a) suitable face-guards to protect the face, neck and throat; and (b) suitable gauntlets for both arms to protect the arm and at least half of the palm and the space between the thumb and forefinger. 3. Wearing of face guards and gauntlets: All persons engaged in any of the processes specified in paragraph 2 of this schedule shall, while at work in such processes, wear the face guards and gauntlets provided under the provisions of the said paragraph. _______________________________________________________________________________________________ SCHEDULE II ELECTROLYTIC PLATING OR OXIDATION OF METAL ARTICLES BY USE OF AN ELECTROLYTE CONTAINING ACIDS, BASES OR SALTS OF METALS SUCH AS CHROMIUM, NICKEL, CADMIUM, ZINC, COPPER,SILVER, GOLD ETC. 1. Definitions: For the purpose of this schedule— (a) “electrolytic process” means the eletrolytic plating or oxidation of metal articles by the use of an electrolyte containing acids, bases or salts of metals such as chromium, nickel, cadmium,zinc, copper, silver, gold etc. ; (b) “bath” means any vessel used for an eletrolytic process or for any subsequent process ; and (c) “employed” means employed in any process involving contact with liquid from a bath. 2. Exhaust draught: An efficient exhaust draught shall be applied to every vessel in which an electrolytic process is carried on. Such draught shall be provided by mechanical means and shall operate on the vapour or spray given off in the process as near as may be at the point of origin. The exhaust draught appliance shall be so constructed, arranged and maintained as to prevent the vapour or spray from entering into any room or place in which work is carried on. 3. Prohibitioin relating to women and young persons: No women, adolescent or child shall be employed or permitted to work at a bath. 4. Floor of work-rooms: The floor of every work-room containing a bath shall be impervious to water. The floor shall be maintained in good and level condition and shall be washed down at least once a day. 5. Protective devices: (1) The occupier shall provide and maintain in good and clean condition the following articles of protective devices for the use of all persons employed on any process at which they are liable to come in contact with liquid from a bath and such devices shall be worn by the persons concerned— (a) waterproof aprons and bibs; and (b) for persons actually working at a bath, loose fitting rubber gloves and rubber boots or other water proof foot wear and chemical goggles. (2) The occupier shall provide and maintain for the use of all persons employed suitable accommodation for the storage and drying of protective devices. 6. Water facilities: (1) There shall be provided and maintained in good repairs for the use of all persons employed in eletrolytic process and processes incidental to it— (a) a wash place under cover, with either— (i) a trough with a smooth impervious surface filled with a waste pipe, and of sufficient length to allow at least 60 cms for every 5 persons employed at any one time, and having a constant supply of water from taps or jets above the trough at intervals of not more than 60 cms., or (ii) at least one wash basin for every five such persons employed at any one time, fitted with a waste pipe and having a constant supply of water laid on. (b) a sufficient supply of clean towels renewed daily, and soap or other suitable cleaning material.
![Page 123: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/123.jpg)
123 (2) In addition to the facility in sub-paragraph 1 an approved type of emergency shower with eye fountain shall be provided and maintained in good working order. Whenever necessary, in order to ensure continuous water supply, storage tank of 1500 litres capacity shall be provided as a source of clean water for emergency use. 7. Cautionary placard ; A cautionary placard in the form specified below and printed in the language of the majority of the workers employed shall be fixed in a prominent place in the factory where it can be easily and conveniently read by the workers. CAUTIONARY NOTICE Electrolytic plating 1. Chemicals handled in this plant are corrosive and poisonous. 2. Smoking, chewing tobacco, eating food or drinking in this area is prohibited. No food stuff or drink shall be brought in this area. 3. Some of these chemicals may be absorbed through the skin and may cause poisoning. 4. A good wash shall be taken before meals 5. Protective devices supplied shall be used while working in this area. 6. Spillage of the chemicals on any part of the body or on the floor shall be immediately washed away with water. 7. All workers shall report for the prescribed medical tests regularly to protect their own health. 8. Medical facilities and records of examinations and tests— (1) The occupier of every factory in which electrolytic processes are carried on shall— (a) employ a qualified medical practitioner for medical surveilance of the workers employed therein whose appointment shall be subject to the approval of the Chief Inspector of Factories; (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a); and (c) maintain a sufficient supply of suitable barrier cream, ointment and impermeable water proof plaster ina separate box readily accessible to the workers and used solely for the purpose of keeping these substances. In case cyanides are used in the bath, the box shall also contain an emergency cyanide kit. (2) The medical practitioner shall examine all workers before they are employed in electrolytic processes. Such examination in case of chrome plating shall include inspection of hands, forearms and nose and will be carried out once at least in every fortnight. (3) The record of the examination referrd to in sub-paragraph (2) shall be maintained in a separate register approved by the Chief Inspector of Factories which shall be kept readily available for inspection by the Inspector. 9. Medical examination by the Certifying Surgeon— (1) Every worker employed in the eletrolytic processes shall be examined by a Certifying Surgeon before his first employment. Such examination shall include X-ray of the chest and— (a) in case of chromium plating include examination of nasal septum perforation and test for chromium in urine; (b) in case of nickel plating, test of nickel in urine; and (c) in case of cadmium plating, test for cadmium in urine and -2 microglobulin in urine. (2) No worker shall be employed in any electrolytic process unless certified fit for such employment by the Certifying Surgeon. (3) Every worker employed in the electrolytic processes shall be re-examined by the Certifying Surgeon at least once in every year except in case of the workers employed in cadmium, chromium and nickel plating processes for whom this examination shall be carried out once every six months. Such examination shall, wherever the Certifying Surgeon considers appropriate, include tests as specified under sub-paragraph (1) excluding the X-ray of the chest which shall not be required normally to be carried out earlier than once in three years.
(4) The Certifying Surgeon after examining a worker, shall issue a Certificate Of Fitness in Form 28. The record of examination and re-examinations carried out shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2) including the nature and the results of the tests shall also be entered by the Certifying Surgeon in a health register in Form 29. (5) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (6) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the electrolytic processes on the ground that continuance therein would involve danger to the health of the workers, he shall make a record of his findings in the said certificate and the health register. The entry of his findings inthose documents should also include the period for which he considers that the said person is unfit for work in the said processes. The person declared unfit in such circumstances shall be provided with alternate placement facility unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated. (7) No person who has been found unfit to work as said in sub-paragraph (6) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes
![Page 124: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/124.jpg)
124 SCHEDULE III MANUFACTURE AND REPAIR OF ELECTRIC ACCUMULATORS 1. Savings: This schedule shall not apply to the manufacture or repair of electric accumulators or parts thereof not containing lead or any compound of lead; or to the repair on the premises, of any accumulator forming part of a stationary battery. 2. Definitions: For the purposes of this schedule— (a) “lead process” means the melting of lead or any material containing lead, casting, pasting, lead burning or any other work including trimming, or any other abrading or cutting of pasted plates, involving the use, movement or manipulation of , or contact with any oxide of lead; (b) “manipulation of raw oxide of lead” means any lead process involving any manipulation or movement of raw oxides of lead other than its conveyance in a receptacle or by means of an implement from one operation to another. 3. Prohibition relating to women and young persons: No women or young person shall be employed or permitted to work in any lead process or in any room in which the manipulation of raw oxide of lead or pasting is carried on. 4. Separation of certain processes: Each of the following processes shall be carried on in such a manner and under such conditions as to secure effectual separation from one another and from any other process:— (a) manipulation of raw oxide of lead; (b) pasting; (c) drying of pasted plates; (d) formation with lead burning (tacking) necessarily carried on in connection therewith; and (e) melting down of pasted plates. 5. Air space: In every room in which a lead process is carried on, there shall be at least 14.2 cubic metres of air space for each person employed therin; and in computing this air space on height over 3.65 metres shall be taken into account. 6. Ventilation: Every work room shall be provided with inlets and outlets of adequate size as to secure and maintain efficient ventilation in all parts of the room. 7. Distance between workers in pasting room: In every pasting room the distance between the centre of the working position of any paster and that of the paster working nearest to him shall not be less than 1.5 metres. 8. Floor of workrooms: (1) The floor of every room in which lead process is carried on shall be— (a) of cement or similar material so as to be smooth and impervious to water; (b) maintained in sound condition; and (c) kept free from materials, plant or other obstruction not required for, or produced in, the process carried on in the room. (2) In all such rooms other than grid casting shops the floor shall be cleansed daily after being thoroughly sprayed with water at a time when no other work is being carried on in the room. (3) In grid casting shops the floor shall be cleaned daily. (4) Without prejudice to the requirements of sub-paragraphs (1), (2) and (3), where manipulation of raw oxide of lead or pasting is carried on, the floor shall be— (a) kept constantly moist while work is being done; (b) provided with suitable and adequate arrangements for drainage; and (c) thoroughly washed daily by means of hose pipe. 9. Work-benches: The work-benches at which any lead process is carried on shall— (a) have a smooth surface and maintained in sound condition; and (b) be kept free from all materials or plant not required for, or produced in, the process carried on thereat; and all such work-benches other than those in grid casting shops shall— (c) be cleansed daily either after being thoroughly damped or by means of a suction cleaning apparatus at a time when no other work is being carried on thereat; and , all such work-benches in grid casting shops, shall— (d) be cleansed daily; and every work-bench used for pasting shall— (e) be covered throughout with sheet lead or other impervious material; (f) be provide with raised edges; and (g) be kept constantly moist while pasting is being carried on. 10. Exhaust draught: (1) The following processes shall not be carried on without the use of an efficient exhaust draught:— (a) melting of lead or materials containing lead; (b) manipulation of raw oxide of lead, unless done in an enclosed apparatus so as to prevent the escape of dust into the workroom; (c) pasting; (d) trimming, brushing, filling or any other abrading or cutting of pasted plates giving rise to dust; and (e) lead burning other than— (i) tacking in the formation room; and (ii) chemical burning for the making of lead lining for cell cases necessarily carried on in such a manner that the application of efficient exhaust is impracticable. (2) Such exhaust draught shall be effected by mechanical means and shall operate on the dust or fume given off as nearly as may be at its point of origin, so as to prevent it from entering the air of any room in which persons work. 11. Fumes and gases from melting pots: The products of combustion produced in the heating of any melting pot shall not be allowed to escape into a room in which persons work. 12. Container for dross: A suitable receptacle with tightly fitting cover shall be provided and used for dross as it is removed from every melting pot. Such receptacle shall be kept covered while in the workroom, except when dross is being deposited therein. 13. Container for lead waste : A suitable receptacle shall be provided in every workroom in which old plates and waste material which may give rise to dust shall be deposited.
![Page 125: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/125.jpg)
12514. Racks and shelves in drying room: (1) The racks or shelves provided in any drying room shall not be more than 2.4 metres from the floor nor more than 60 centimetres in width; Provided that as regards racks or shelves set or drawn from both sides the total width shall not exceed 120cm. (2) Such racks or shelves shall be cleaned only after being thoroughly damped unless an efficient suction cleaning apparatus is used for this purpose. 15. Protective clothing: (1) Protective clothing shall be provided and maintained in good repair for all persons employed in— (a) manipulation of raw oxide of lead; (b) pasting ; and (c) the formation room; —and such clothing shall be worn by the persons concerned. (2) The protective clothing shall consist of a waterproof apron and waterproof footwear; and, in addition, as regards persons employed in the manipulation of raw oxide of lead or in pasting, head coverings. The head coverings shall be washed daily. 16. Messroom: There shall be provided and maintained for the use of all persons employed in a lead process and remaoining in the premises during the intervals, a suitable messroom, which shall be furnished with sufficient tables and benches, and adequate means for warming food. The messroom shall be placed under the charge of a responsible person and shall be kept clean. 17. Cloakroom : There shall be provided and maintained for the use of all persons employed in a lead process— (a) a cloakroom for clothing put off during working hours with adequate arrangements for drying the clothing if wet which accommodation shall be separated from any messroom; and (b) separate and suitable arrangements for the storage of protective clothing provided under paragraph 15. 18. Washing facilities: (1) There shall be provided and maintained ina cleanly state and in good repair for the use of all persons employed in a lead process— (a) a wash place under cover, with either— (i) aq trough with a smooth impervious surface fitted with a waste pipe without plug, and of sufficient length to allow of at least 60 centimetres for every five such persons employed at any one time, and having a constant supply of water from taps or jets above the trough at intervals of not more than 60cm.; or (ii) at least one wash basin for every five such persons employed at any one time, fitted with a waste pipe and plug and having a constant supply of water laid on; (b) a sufficient supply of clean towels madeof suitable materials renewed daily, which supply, in the case of pasters and persons employed in the manipulation of raw oxide of lead, shall include a separate marked towel for each such worker; and (c) a sufficient supply of soap or other suitable cleaning material and of nail brushes. (2) There shall in addition be provided means of washing in close proximity to the rooms in which manipulation of raw oxide of lead or pasting is carried on if required by notice in writing from the Chief Inspector. 19. Time to be allowed for washing: Before each meal and before the end of day’s work, at least ten minutes, in addition to the regular meal times, shall be allowed for washing to each person who has been employed in the manipulation of raw oxide of lead or in pasting; Provided that if there be one basin or 60centimetres of trough for each such person this paragraph shall not apply. 20. Facilities for bathing: Sufficient bath accommodation to the satisfaction of the Chief Inspector shall be provided for all persons engaged in the manipulation of raw oxide of lead or in pasting, and a sufficient supply of soap and clean towels.
21. Food, drinks etc. Prohibited inworkroom: No food, drink, pan and supari or tobacco shall be consumed or brought by any worker into any workroom in which aqny lead process is carried on. 22. Medical facilities and records of examinations and tests: (1) The occupier of every factory in which manufacture and repair of electric accumulators is caried on shall— (a) employ aq qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories ; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a).
(2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chierf Inspector of Factories, which shall be kept readily available for inspection by the Inspector
![Page 126: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/126.jpg)
126 23. Medical examination by Certifying Surgeon: (1) Every worker employed in lead processes shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include tests for lead in urine and blood. ALA in urine, haemoglobin content, stippling of cells and steadiness test. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every three calendar months. Such re-examination shall, wherever the Certifying Surgeon considers appropriate, include tests specified in sub-paragraph (1) (3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 28. The record of examination and re-examination carried out shall be entered in the certificate and the certificate shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a Health Register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated. (6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination again certfies him fit for employment ion those processes. _______________________________________________________________________________________________ SCHEDULE IV GLASS MANUFACTURE 1. Definitions : For the purposes of this schedule— (a) “efficient exhaust draught” means localised ventilation effected by mechanical means for the removal of gas, vapour, dust or fumes so as to prevent them (as far as practicable under the atmospheric conditions usually prevailing) from escaping into the air of any place in which work is carried on. No draught shall be deemed efficient which fails to remove smoke generated at the point where such gas, vapour, fume (b) “lead compound” means any compound of lead other than galena which, when treated in the manner described below, yields to an aqueous solution of hydrochloric acid a quantity of soluble lead compound exceeding, when The method of treatment shall be as follows:— A weighed quantity of the material which has been dried at 100◦ centigrade and thoroughly mixed shall be continuously shaken for one hour at the common temperature with 1,000 times its weight of an aqueous solution of hydrochloric acid containing 0.25% by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered. The lead salt contained in the clear filtrate shall then be precipitated as lead sulphide and weighed as lead sulphate. (b) “lead compound” means any compound of lead other than galena which, when treated in the manner described below, yields to an aqueous solution of hydrochloric acid a quantity of soluble lead compound exceeding, when The method of treatment shall be as follows:— A weighed quantity of the material which has been dried at 100◦ centigrade and thoroughly mixed shall be continuously shaken for one hour at the common temperature with 1,000 times its weight of an aqueous solution of hydrochloric acid containing 0.25% by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered. The lead salt contained in the clear filtrate shall then be precipitated as lead sulphide and weighed as lead sulphate. 2. Exhaust draught: The following processes shall not be carried on except under an efficient exhaust draught or such other conditions as may be approved by the Chief Inspector:— (a) the mixing of raw materials to form a “batch”; (b) the dry grinding, glazing and polishing of glass or any article of glasss; (c) all processes in which hydrofluoric acid fumes or ammoniacal vapours are given off; (d) all processes in the making of furnace moulds or ‘pots’ including the grinding or crushing of used ‘pots’ and (e) all processes involving the use of a dry lead compound. 3. Prohibition relating to women and young persons: No women or young person shall be employed or permitted to work in any of the operations specified in paragraph 2 or at any place where such operations are carried on. 4. Floor and work-benches: The floor and work-benches of every room in which a dry compound of lead is manipulated or in which any process is carried on giving off silica dust shall be kept moist and shall comply with the folowing requirements:— (a) the floor shall be— (i) of cement or similar material so as to be smooth and impervious to water; (ii) maintained in sound condition; and (iii) cleansed daily after being thoroughly spread with water at a time when no other work is being carried on in the room; and (b) the work-benches shall— (i) have a smooth surface and be maintained in sound condition; and
![Page 127: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/127.jpg)
127 (ii) cleansed daily either after being thoroughly damped or by means of a suction cleaning apparatus at a time when no other work is being carried on thereat. 5. Use of hydrofluoric acid: The following provisions shall apply to rooms in which glass is treated with hydrofluoric acid:— (a) there shall be inlets and outlets of adequate size so as to secure and maintain efficient ventilation in all parts of the room; (b) the floor shall be covered with guttaparcha and be tight and shall slope gently down to a covered drain; (c) the workplace shall be so enclosed in projecting hoods that openings required for bringing in the objects to be treated shall be as small as practicable; and (d) the efficient exhaust draught shall be so contrived that the gases are exhausted downwards. 6. Storage and transport of hydrofluoric acid: Hydrofluoric acid shall not be stored or transported except incylinders or receptacles made of lead or rubber. 7. Blow pipes: Every glass blower shall be provided with a separate blow pipe bearing the distinguishing mark of the person to whom it is issued and suitable facilities shall be readily available to every glass blower for sterilizing his blow pipe. 8. Food,drinks etc. prohibited in workrooms: No food, drink, pan and supari or tobacco shall be brought into or consumed by any worker in any room or work place wherein any process specified in paragraph 2 is carried on. 9. Protective clothing: The occupier shall provide, maintain in good repair and keep in a clean condition for the use of all persons employed in the processes specified in paragraph 2 suitable protective clothing, footwear and goggles according to the nature of the work and such clothing, footwear etc. shall be worn by the persons concerned. 10. Washing facilities: There shall be provided and maintained in a cleanly state and in good repair for the use of all persons employed in the processes specified in paragraph 20— (a) wash place with either— (i) a trough with a smooth impervious suface fitted with a waste pipe, without plug, and of sufficient length to allow of at least 60 centimetres for every five such persons employed at any one time, and having a constant supply of water from taps or jets above the trough at intervals of not more than 60 cm.; or (ii) at least one wash basin for every five such persons employed at any one time, fitted with a waste pipe and plug and having an adequate supply of water laid on or always readily available; (b) a sufficient supply of clean towels made of suitable material renewed daily with a sufficient supply of soap or other suitable cleaning material and of nail brushes ; and (c) a sufficient number of stand pipes with taps the number and location of which shall be to the satisfaction of the Chief Inspector. 11. Medical facilities and record of examinations and tests: (1) The occupier of every factory in which glass manufacturing processes are carried out shall— (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose appointment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The records of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector Of Factories, which shall be kept readily available for inspection by the Inspector. 11 A. Medical examination by Certifying Surgeon: (1) Every worker employed in processes specified in paragraph 2 shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include pulmonary function tests and in suspected cases chest X-ray as well as tests for lead in urine. No worker shall be allowed to work after fifteen days of his first emploment in the factory unless certified fit for such emploment by the Certifying Surgeon. The person so suspended from the process shall be provided with an alternate placement facility unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated. (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in twelve calendar months. Such re-examination shall, wherever the Certifying Surgeon considers appropriate, include tests as specified in sub-paragraph (1). (3) The Certifying Surgeon after examining a worker shall issue a Certificate of Fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspectio by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes.
![Page 128: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/128.jpg)
128 (6) No person who has been found unfit to work as said in sub-paragraph (5) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. 12. Exemption: If the Chief Inspector is satisfied in respect of any factory or any class of process that, owing to the special methods of work or the special conditions in a factory or otherwise, any of the requirements of this scedule can be suspended or relaxed without dangers to the persons employed therein, or that the application of this schedule or any part thereof is for any reason impracticable he may by certificate in writing authorise such suspensioin or relaxation as may be indicated in the certificate for such period and on such conditions as he may think fit. _______________________________________________________________________________________________ SCHEDULE V GRINDING OR GLAZING OF METALS AND PROCESSES INCIDENTAL THERETO 1. Exception: (1) Nothing in this schedule shall apply to any factory in which only repairs are carried on except any part thereof in which one or more persons are wholly or mainly employed in the grinding or glazing of metals. (2) Nothing in this schedule except paragraph 4 shall apply to any grinding or glazing of metals carried on intermittently and at which no person is employed for more than 12 hours in any week. 2. Definitions: For the purposes of this schedule— (a) “grindstone” means a grindstone composed of natural or manufactured sandstone but does not include a metal wheel or cylinder into which blocks of natural or manufactured sandstone are fitted; (b) “abrasive wheel” means a wheel manufactured of bonded emery or similar abrasive; (c) “grinding” means the abrasion, by aid of mechanical power, of metal, by means of a grindstone or abrasive wheel; (d) “glazing” means the abrading, polishing or finishing, by aid of mechanical power, of metal, by means of any wheel, buff, mop or similar appliance to which any abrading or polishing substance is attached or applied; (e) “racing” means the turning up, cutting or dressing of a revolving grindstone before it is brought into use for the first time; (f) “hacking” means the chipping of the surface of a grindstone by a hack or similar tool; and (g) “rodding” means the dressing of the surface of a revolving grindstone by the application of a rod, bar or strip of metal to such surface. 3. Equipment for removal of dust: No racing, dry grinding or glazing shall be performed without— (a) a hood or other appliance so constructed, arranged, placed and maintained as substantially to intercept the dust thrown off; (b) a duct of adequate size, air tight and so arranged as to be capable of carrying away the dust, which duct shall be kept free from obstruction and shall be provided with proper means of access for inspection and cleaning, and where practicable, with a connection at the end remote from the fan to enable Inspector to attach thereto any instrument necessary for ascertaining the pressure of air in the said duct; and (c) a fan or other efficient means of producing a draught sufficient to extract the dust; Provided that the Chief Inspector may accept any other appliance that is, in his opinion, as effectual for the interception, removal and disposal of dust thrown off as a hood, duct and fan would be. 4. Restriction on employment on grinding operations: Not more than one person shall at any time perform the actual process of ginding or glazing upon a grindstone, abrasive wheel or glazing applianc; Provided that this paragraph shall not prohibit the employment of persons to assist in the manipulation of heavy or bulky articles at any such grindstone, abrasive wheel or glazing appliance. 5. Glazing: Glazing or other processes, except other processes incidental to wet grinding upon a grindstone shall not be carried on in any room in which wet grinding upon a grindstone is done. 6. Hacking and rodding: Hacking and rodding shall not be done unless during the process either an adequate supply of water is laid on at the upper surface of the grindstone or adequate appliances for trhe interception of dust are provided in accordance with the requirements of paragraph 3. 7. Examination of dust equipment: (1) All equipment for the extraction or suppression of dust shall at least once in every six months be examined and tested by a competent person and any defect disclosed by such examination and test shall be rectified as soon as practicable. (2) A register containing particulars of such examination and tests shall be kept in Form 25. 7A. Medical facilities and records of examinations and tests: (1) The occupier of every factory in which grinding or glazing of metals are carried out, shall— (a) employ a qualified medical practitioner for medical surveillance of the workers employed thereon whose appointment shall be subject to the approval of the Chief Inspector of factories; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector.
![Page 129: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/129.jpg)
1297B. Medical examination by Certifying Surgeon: (1) Every worker employed in grinding or glazing of metals and processes incidental thereto shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include pulmonary function tests and in suspected cases chest X-rays. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certfying Surgeon in which case the person affected shall be suitably rehabilitated. (2) Every worker employed in the said processes shall be re-examined by the Certifying Surgeon at least once in every 12 calendar months. Such re-examination shall, wherever the Certifying Surgeon considers appropriate, include tests as specified in sub-paragraph (1) (3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certfying Surgeon in a health register in Form29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. (6) No person who has been found unfit to work as said in sub-paragraph (5) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certfies him fit for employment in those processes. 8. Exemption: The Chief Inspector may by certificate in writing, subject to such conditions as he may specify therein, relax or suspend any of the provisions of this schedule in respect of any factory if owing to the special methods of work or otherwise such relaxation or suspensiion is practicable without danger to the health or safety of the persons employed. SCHEDULE VI MANUFACTURE AND TREATMENT OF LEAD AND CERTAIN COMPOUNDS OF LEAD 1. Application: This schedule shall apply to all factories or parts of factories in which any one of the following operations are carried on:— (a) work at a furnace where the reduction or treatment of zinc or lead ores is carried on; (b) the manipulation, treatment or reduction of ashes containing lead, the desilvering of lead or the melting of scrap lead or zinc; (c) the manufactureof solder or alloys containing more than 10% of lead; (d) the manufacture of any oxide, carbonate, sulphate, chromate, acetate, nitrate or silicate of lead; (e) the handling or mixing of lead tetra-ethyl (f) any other operation involving the use of a lead compound; and (g) the cleaning of workrooms where any of the operations aforesaid are carried on. 2. Definitions: For the purposes of this schedule— (a) “lead compound” means any compound of lead other than galena which, when treated in the manner described below, yields to an aqueous solution of hydrochloric acid, a quantity of soluble lead compound exceeding , when calculated as lead monoxide, 5% of the ‘dry weight’ of the portion taken for analysis. In the case of paints and similar products and other mixtures containing oil or fat the “dry weight” means the dry weight of the material remaining after the substance has been thoroughly mixed and treated with suitable solvents to remove oil, fats, varnish or other media. The method of treatment shall be as follows:— A weighed quantity of the material which has been dried at 100◦C and thoroughly mixed shall be continuously shaken for one hour, at the common temperature with 1000 times its weight of an aqueous solution of hydrochloric acid containing 0.25% by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered. The lead salt contained in the clear filtrate shall then be precipitated as lead sulphide and weighed as lead sulphate; (b) “efficient exhaust draught” means localised ventilation affected by heat or mechanical means, for the removal of gas, vapour, dust or fumes so as to prevent them (as far as practicable under the atmospheric conditions usually prevailing) from escaping into the air of any place in which work is carried on. No draught shall be deemed efficient which fails to remove smoke generated at the point where such gas, vapour, fumes or dust originate. 3. Prohibition relating to women and young persons: No women or young persons shall be employed or permitted to work in any operations specified in paragraph 1. 4. Requirements to be observed: No person shall be employed or permitted to work in any process involving the use of lead compound if the process is such that dust or fume from a lead compound is produced therein, or the persons employed therein are liable to be splashed with any lead compound in the course of their employment unless the provisions of paragraphs 5 to 13 are complied with.
![Page 130: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/130.jpg)
1305. Exhaust draught: Where dust, fume, gas or vapour is produced in the process, provision shall be made for removing them by means of an efficient exhaust draught so contrived as to operate on the dust, fume, gas or vapour as closely as possible to the point of origin. 6. Food, drinks etc. Prohibited in workroom: No food, drink, pan and supari or tobacco shall be brought into or consumed by any worker in any workroom in which the process is carried on and no person shall remain in any such room during intervals for meals or rest. 7. Protective clothing: Suitable protective overalls and head coverings shall be provided, maintained and kept clean by the occupier and such apoveralls and head coverings shall be worn by the persons employed. 8. Cleanliness of workrooms, tools etc.: The rooms in which the persons are employed and all tools and apparatus used by them shall be kept in a clean state. 9. Washing facilities: (1) The occupier shall provide and maintain for the use of all persons employed suitable washing facilities consisting of — (a) a trough with a smooth impervious surface fitted with a waste pipe without plug and of sufficient length to allow at least 60 centimetres for every ten persons employed at any one time, and having a constant supply of clean water from taps of jets above the trough at intervals of not more than 60cm.; or (b) at least one wash basin for every ten persons employed at any one time, fitted with a waste pipe and plug and having a constant supply of clean water; — togetherwith, in either case, asufficient supply of nail brushes, soap or other suitable cleansing material and clean towels. (2) The facilities so provided shall be placed under the charge of a responsible person and shall be kept clean. 10. Messroom or canteen: The occupier shall provide and maintain for the use of the persons employed suitable and adequate arrangements for taking their meals. The arrangements shall consist of the use of a room separate from any workroom which shall be furnished with sufficient tables and benches, and unless a canteen serving hot meals is provided, adequate means for warming the food..The room shall be adequately ventilated by the circulation of fresh air, shall be placed under the charge of a responsible person and shall be kept clean. 11. Cloakroom: The occupier shall provide and maiintain for the use of persons employed, suitable accommodation for clothing not worn during working hours, and for the drying of wet clothing. 12. Medical facilities and records of examinations and tests: (1) The occupier of every factory to which the shedule applies shall— (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose appointment shall be subject to the approval of the Chief Inspector of Factories ; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 13. Medical examination by Certifying Surgeon: (1) Every worker employed in the processes referred to in paragraph 1 shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include tests for lead in blood and urine. ALA in urine, heomoglobin content, stippling of cells and steadiness test. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated. (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every three calendar months. Such re-examination shall, wherever the Certifying Surgeon considers appropriate, include tests specified in sub-paragraph (1). (3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and thecertificate shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2) including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in the health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspecton by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. (6) No person who has been found unfit to work as said in the sub-paragraph (5) above shall be re-employed or permitted to work in the said processes until the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. 14. Exemption: Where the Chief Inspector is satisfied that all or any of the provisions of this schedule are not necessary for the protection of the persons employed, he may by certificate in writing, exempt any factory from all or any of such provisions, subject to such conditions as he may specify.
![Page 131: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/131.jpg)
131 SCHEDULE VII GENERATING PETROL GAS FROM PETROL 1. Prohibition relating to women and young persons: No women or young person shall be employed or permitted to work in or shall be allowed to enter any building in which the generation of gas from dangerous petroleum is carried on. 2. Flame traps: The plant for generation of gas from dangerous petroleum and associated piping and fittings shall be fitted with at least two efficient flame traps so designed and maintained as to prevent a flash back from any burner to the plant. One of these traps shall be fitted as close to the plant as possible. The plant and all pipes and valves shall be installed and maintained free from leaks. 3. Generating building or room: All plants for generation of gas from dangerous petroleum erected after the coming into force of the provisions specified in this schedule, shall be erected outside the factory building proper in a separate well ventilated building (hereinafter referred to as the “generating building”). In the case of such plants erected before the coming into force of the provisions specified in this schedule, there shall be no direct communication between the rooms where such plants are erected (hereinafter referred to as “the generating room”) and the remainder of the factory building. So far is practicable, all such generating rooms shall be constructed of fire-resisting materials. 4. Fire extinguishers: An efficient means of extinguishing petrol fires shall be maintained in an easily accessible position near the plant for generation of gas from dangerous petroleum. 5. Plant to be approved by the Chief Inspector: Petrol gas shall not be manufactured except in a plant for generating petrol gas the design and construction of which has been approved by the Chief Inspector. 6. Escape of petrol: Effective steps shall be taken to prevent petrol from escaping into any drain or sewer. 7. Prohibition relating to smoking: No person shall smoke or carry matches, fire or naked light or other means of producing a naked light or spark in the generation room or building or in the vicinity thereof and a warning notice in the language understood by majority of the workers shall be pasted in the factory prohibiting smoking and the carrying of matches, fire or naked light or other means of producing a naked light or spark into such room or building. 8. Access to petrol or container: No unauthorised person shall have access to any petrol or to a vessel containing or having actually contained petrol. 9. Electric fittings: All electric fittings shall be of flameproof construction and all electric conductors shall either be enclosed in metal conduits or be lead-sheathed. 10. Construction of doors: All doors in the generating room or building shall be constructed to open outwards or to slide and no door shall be locked or obstructed or fastened in such a manner that it cannot be easily and immediately opened from the inside while gas is being generated and any person is working in the generating room or building. 11. Repair of containers: No vessel that has contained petrol shall be repaired in a generating room or building and no repairs to any such vessel shall be undertaken unless live steam has been blown into the vessel and until the interior is thoroughly steamed out or other equally effective steps have been taken to ensure that it has been rendered free from petrol or flammable vapour. _______________________________________________________________________________________________ SCHEDULE VIII CLEARING OR SMOOTHING, ROUGHENING ETC. OF ARTICLES BY A JET OF SAND, METAL SHOT OR GRIT OR OTHER ABRASIVE PROPELLED BY A BLAST OF COMPRESSED AIR OR STEAM 1. Definitions: For the purposes of this schedule:— (a) “blasting” means cleaning, smoohing, roughening or removing of any part of the surface of any article by the use as an abrasive of a jet of sand, metal shot, grit or other material, propellled by a blast of compressed air or steam; (b) “blasting enclosure” means a chamber, barrel, cabinet or any other enclosure designed for the performance of blasting therein; (c) “blasting chamber” means blasting enclosure in which any person may enter at any time in connection with any work or otherwise; and (d) “cleaning of castings” where done as an incidental or supplemental process in connection with the making of metal castings means the freeing of the casting from adherent sand and other substance and includes the removal of cores and the general smoothening of a casting, but does not include the free treatment. 2. Prohibition of sand blasting: Sand or any other substance containing free silica shall not be introduced as an abrasive into any blasting apparatus and shall not be used for blasting; Provided that this clause shall come into force two years after the comimg into operation of this schedule; Provided further that no woman or young person shall be employed or permitted to work at any opeeration of sand blasting. 3. Precautions in connection with blasting operations: (1) Blasting shall not be done except in a blasting enclosure and no mwork other than blasting any work immediately incidental thereto and clearing and repairing of the enclosure
![Page 132: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/132.jpg)
132including the plant and appliances situated therein shall be performed in a blasting enclosure. Every door, aperture and joint of blasting enclosure shall be kept closed and air tight while blasting is being done therein. (2) Blasting enclosure shall always be maintained in good condition and effective measures shall be taken to prevent dust escaping from such enclosure and from apparatus therewith, into the air of any room. (3) There shall be provided and maintained for and in connection with every blasting enclosure, efficient apparatus for separating, so far as practicable,abrasive which has been used for blasting and which is to be used again as an abrasive, from dust or particulars of other materials arising from blasting; and no such abrasive shall be introduced into any blasting apparatus and used for blasting until it has been so separated; Provided that this clause shall not apply, except in the case of blasting chambers, to blasting enclosures constructed or installed before the coming into force of this schedule, if the Chief Inspector is of the opinion that it is not reasonably practicable to provide such separating apparatus. (4) There shall be provided and maintained in connection with every blasting enclosure efficient ventilating plant to extract, by exhaust draught effected by mechanical means, dust, produced in the enclosure. The dust extracted and removed shall be disposed off by such method and in such manner that it shall not escape into the air of any room; aand every other filtering or settling device situated in a room in which persons are employed, other than persons attending to such bag or other filtering or settling device, shall be completely separated from the general air of that room in an enclosure ventilated to the open air. (5) The ventilating plant provided for the purpose of sub-paragraph (4) shall be kept in continuous operation whenever the blasting enclosure is in use whether or not blasting is actually taking place therein, and in the case of a blasting chamber, it shall be in operation even when any person is inside the chamber for the purpose of cleaning. 4. Inspection and examination: (1) Every blasting enclosure shall be specially inspected by a competent person at least once in every week in which it is used for blasting. Every blasting enclosure, the apparatus connected therewith and the ventilating plant shall be thoroughly examined and in the case of ventilating plant, tested by a competent person at least once in every month. (2) Particulars of the result of every such inspection, examination or test shall forthwith be entered in a register which shall be kept in a Form approved by the Chief Inspector and shall be available for inspection by any workman employed in or in connection with blasting in the factory. Any defect found on any such inspection, examination or test shall be immediately reported by the person carrying out the inspection, examination or test to the occupier, manager or other appropriate person and without prejudice to the foregoing requirements of this schedule, shall be removed without avoidable delay. 5. Provision of protective helmets, gauntlets and overalls: (1) There shall be provided and maintained for the use of all persons who are employed in a blasting chamber, whether in blasting or in any work connected therewith or in cleaning such a chamber, protective helmets of a type approved by a certificate of the Chief Inspector; and every such person shall wear the helmet provided for this use whilst he is in the chamber and shall not remove it until he is outside the chamber. (2) Each protective helmet shall carry a distinguishing mark indicating the person by whom it is intended to be used and no person shall be allowed or required to wear a helmet not carrying his mark or a helmet which has been worn by another person and has not since been thoroughly disinfected. (3) Each protective helmet when in use shall be supplied with clean and not unreasonably cold air at a rate of not less than 170 litres per minute. (4) Suitable gauntlets and overalls shall be provided for the use of all persons while performing blasting or assisting at blasting, and every such person shall while so engaged wear the gauntlet and overall provided. 6. Precautions in connection with cleaning and other work: (1) Where any person is engaged upon cleaning of any blasting apparatus or blasting enclosure or of any apparatus or ventilating plant connected therewith or the surroundings thereof or upon any other work inconnection with any blasting apparatus or blasting enclosure or with any apparatus or ventilating plant connected therwith so that he is exposed to the risk of inhaling dust which has arisen from blasting, all practicable measures shall be taken to prevent such inhalation. (2) In connection with any cleaning operation referred to in paragraph 5 and with the removal of dust from fitering or settling devices all practicable measures shall be taken to dispose off the dust in such a manner that it does not enter the air of any room. Vacuum cleaner shall be provided and used wherever practicable for such cleaning operations. 7. Storage accommodation for protective wear: Adequate and suitable storage accommodation for the helmets, gauntlets and overalls required to be provided by paragraph 5 shall be provided outside and conveniently near to every blasting enclosure and such accommodation shall be kept clean. Helmets, gauntlets and ovaealls when not in actual use shall be kept in this accommodation. 8. Maintenance and cleaning of protective wear: All helmets, gauntlets, overalls and other protective devices or clothings provided and worn for the purpose of this schedule, shall be kept in good conditiion and so far as is reasonably practicable shall be cleaned on every weekday in which they are used. Where dust arising from the cleaning of such protective clothing or devices is likely to be inhaled, all practicable measures shall be taken to prevent such inhalation. Vacuum cleaners shall, wherever practicable, be used for removing dust from such clothing and compressed air shall not be used for removing dust from any clothing.
![Page 133: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/133.jpg)
1339. Maintenance of vacuum cleaning plant: Vacuum cleaning plant used for the purpose of this schedule shall be properly maintained. 9A. Medical facilities and records of examinations and tests: (1) The occupier of every factory to which this schedule applies, shall— (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 9B. Medical examination by Certifying Surgeon: (1)Every worker employed in any of the processes to which this schedule applies shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include pulmonary function test and chest X-ray. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated. (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every twelve calendar months and such examination shall, wherver the Certifying Surgeon considers appropriate, include pulmonary function test and chest X-ray once in every three years.
(3) The Certifying Surgeon after examining a worker, shall issue a Certificate of Fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried under sub-paragraphs (1) and (2) including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. (6) No person who has been found unfit to work in the said processes as said in sub-paragraph (5) above shall be re-employed or permitted to work unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. 10. Restrictions in employment of young persons: (1) No person under 18 years of age shall be employed in blasting or assisting at blasting or in any blasting chamber or in the cleaning of any blasting apparatus or any blasting enclosure or any apparatus or ventilating plant connected therewith or be employed on maintenance or repair work at such apparatus, enclosure or plant. (2) No person under 18 years of age shall be employed to work regularly within 20 feet of any blasting enclosure unless the enclosure is in a room and he is outside that room where he is effectively separated from any dust coming from the enclosure. 11. Power to exempt or relax: (1) If the Chief Inspector is satisfied that in any factory or any class of factory the use of sand or other substance containing free silica as an abrasive in blasting is necessary for a particular manufacture or process (other than the process incidental or supplemental to making of metal casting) and that the manufacture or process cannot be carried on without the use of such abrasive or that owing to the special conditions or special method of work or otherwise any requirement of this schedule can be suspended either temporarily or permanently, or can be relaxed without endangering the health of the persons employed or that application of any of such requirements, for any reason impracticable or inappropriate, he may, with the previous sanction of the State Government, by an order in writing exempt the said factory or class of factory from such provisions of this schedule, to such an extent and subject to such conditions and for such period as may be specified in the said order. (2) Where an exemption has been granted under sub-paragraph (1), a copy of the order shall be displayed at a notice board at a prominent place at the main entrance or entrances to the factory and also at the place where the blasting is carried on. _______________________________________________________________________________________________ SCHEDULE IX LIMING AND TANNING OF RAW HIDES AND SKINS AND PROCESSES INCIDENTAL THERETO 1. Cautionary notices: (1) Cautionary notices as to anthrax in the Form specified by the Chief Inspector shall be affixed in prominent positions in the factory where they may be easily and conveniently read by the persons employed. (2) A copy of the warning notice as to anthrax in the Form specified by the Chief Inspector shall be given to each person employed when he is engaged, and subsequently if still employed, on the first day of each calendar year.
![Page 134: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/134.jpg)
134 (3) Cautionary notices as to the effects of chrome on the skin shall be affixed in prominent positions in every factory in which chrome solutions are used and such notices shall be so placed as to be easily and conveniently read by the persons employed. (4) Notices shall be affixed in prominent places in the factory stating the position of the first-aid box or cupboard and the name of the person in charge of such box or cupboard. (5) If any person employed in the factory is illiterate, effective steps shall be taken to explain carefully to such illiterate person the contents of the notice specified in sub-paragraphs (1), (2) and (4) and if chrome solutions are used in the factory, the contents of the notice specified in sub-paragraph (3). 2. Protective clothing: The occupier shall provide and maintain in good condition the following articles of protective clothing:— (a) waterproof footwear, leg covering , aprons and gloves for persons employed in processes involving contact with chrome solutions, including the preparation of such solutions; (b) gloves and boots for persons employed in lime yard; and (c) protective footwear, aprons and gloves for persons employed in processes involving the handling of hides or skins, other than in processes specified in sub-paragraphs (a) and (b) above; Provided that gloves, aprons, leg coverings or boots may be of rubber or leather, but the gloves and boots to be provided under sub-paragrahs (a) and (b) shall be rubber;
Provided furhter that the gloves may not be provided to persons fleshing by hand or employed in processes in which ther is no risk of contact with lime, sodium sulphide or other caustic liquor. 3. Washing facilities,messroom and cloakroom: There shall be provided and maintained in a clean state and in good repair for the use of all persons employed:— (a) a trough with a smooth impervious surface fitted with a waste pipe without plug, and of sufficient length to allow at least 60 centimetres for every ten persons employed at any one time, and having a constant supply of water from taps or jets above the trough at intervals of not more than 60 cm; or at least one wash basin for every ten such persons employed at any one time, fitted with a waste pipe and plug and having a constant supply of water togetherwith, in either case, a sufficient supply of nail brushes, soap or other suitable cleaning material, and clean towels; (b) a suitable messroom, adequate for the number rermaining on the premises during the meal intervals, which shall be furnished with sufficient tables and benches and adequate means for warming food and for boiling water. The messroom shall— (i) be separate from any room or shed in which hides or skins are stored, treated or manipulated; (ii) be placed under the charge of a responsible person; and (c) suitable accommodation for clothing put off during working hours and another accommodation for protective clothing and also adequate arrangements for drying up the clothing in both the cases, if wet. The accommodation so provided shall be kept clean at all times and placed under the charge of a respnsible person. 4. Food, drinks etc., prohibited in workrooms: No food, drink, pan and supari or tobacco shall be brought into or consumed by any worker in any workroom or shed in which hides or skins are stored, treated or manipulated. 5. Medical facilities and record of examination and tests: (1) The occupier of every factory to which the schedule applies shall— (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a); (c) arrange for inspection of the hands of all the persons keeping in contact with chromium substances to be made twice a week, and (d) provide, maintain and supply suitable ointment and plaster in a box readily accessible to the workers and solely used for the purpose of keeping the ointment and the plaster. (2) The record of medical examination and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector 6. Medical examination by Certifying Surgeon: (1) Every worker employed in any of the processes to which the schedule applies shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include skin test for dermatoses and detection of anthrax bacillus from local lesion by gram stain. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided with alternative placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated. (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every twelve calendar months. Such re-examination shall, wherever the Certifying Surgeon considers appropriate, include tests as specified in sub-paragraph (1). (3) The Certifying Surgeon, after examining a worker, shall issue a certificate of fitness in Form 28. The record of examination and re-examination carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector.
![Page 135: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/135.jpg)
135 (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. (6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. SCHEDULE X PRINTING PRESSES AND TYPE FOUNDRIES AND CERTAIN LEAD PROCESSES CARRIED THEREIN 1. Definitions: For the purposes of this schedule— (a) “lead material” means material containing not less than five percent of lead; (b) “lead process” means— (i) the melting of lead or any lead material for casting and mechanical composing; (ii) the recharging of machines with used lead material; (iii) any other work including removal of dross from melting pots and cleaning of plungers; and (iv) manipulation, movement or other treatment of lead material. (c) “efficient exhaust draught” means localised ventilation effected by heat or mechanical means, for the removal of gas, vapour, dust or fumes so as to prevent them from escaping into the air of any place in which work is carried on. No draught shall be deemed efficient which fails to remove gas, vapour, fume or dust at the point where they originate. 2. Exhhaust draught: (1) None of the following processes shall be carried on except with an efficient exhaust draught unless carried on in such a manner as to prevent free escape of gas, vapour, fumes or dust into any place in which work is carried on, or unless carried on, in electrically heated and thermostatically controlled melting pots— (a) melting lead material or slugs; and (b) heating lead material so that vapour containing lead is given off. (2) Such exhaust draught shall be effected by mechanical means and so contrived as to operate on the dust, fume, gas or vapour given off as closely as may be at its point of origin. 3. Prohibitioin relating to women and young person: No women or young person shall be employed or permitted to work in any leads process. 4. Separation of certain processes: Each of the following processes shall be carried on in such a manner and under such conditions as to secure effectual separation from one another and from any other processes— (a) melting of lead or any lead material; (b) casting of lead ingots and (c) mechanical composing. 5. Container for dross: A suitable receptacle with tightly fitting cover shall be provided and used for dross as it is removed from every melting pot. Such receptacle shall be kept covered while in the workroom near the machine except when the dross is being deposited therein. 6. Floor of workroom: The floor of every workroom where lead process is carried on shall be— (a) of cement or similar material so as to be smooth and impervious to water; (b) maintained in sound condition; and (c) shall be cleansed throughout daily after being thoroughly damped with water at a time when no other work is being carried on at the place. 7. Messroom: There shall be provided and maintained for the use of all persons employed in a lead process and remaining on the premises during the meal intervals, a suitable messroom which shall be furnished with sufficient tables and benches. 8. Washing facilities: There shall be provided and maintained in a clean state and in good repair for the use of all persons employed in a lead process— (a) a wash place with either— (i) a trough with a smooth impervious surface fitted with a waste pipe without plug, and of sufficient length to allow at least 60 centimetres for every five such persons employed at any one time and having a constant supply of water from taps or jets above the trough at intervals of not more than 60 cm.; or (ii) at least one wash basin for every five such persons employed at any one time fitted with a waste pipi and plug and having an adequate supply of water laid on or always readily available; and (b) a sufficient supply of clean towels made of suitable material, renewed daily with a sufficient supply of soap or other suitable cleansing material. 9. Food,drinks etc. Prohibited in workrooms: No food, drink, pan and supari or tobacco shall be consumed or brought by any worker into any workroom in which any lead process is carried on. 10. Medical facilities and records of examinations and tests: (1) The occupier of every factory to which the schedule applies shall— (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in the clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 10A. Medical examination by Certifying Surgeon: (1) Every worker employed in a lead process shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include tests for lead in urine and blood, ALA in urine, haemoglobin, stippling of cells and steadiness test. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so
![Page 136: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/136.jpg)
136suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated. (2) Every worker employed in the said process shall be re-examined by a Certifying Surgeon at least once in every six calendar months. Such re-examination shall, wherever the Certifying Surgeon considers appropriate, include tests as specified in sub-paragraph (1). (3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be enterd by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said process on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should include the period for which he considers that the said person is unfit for work in the said processes. (6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. 11. Exemption: Where the Chief Inspector is satisfied that all or any of the provisions of this schedule are not necessary for the protection of persons employed, he may by certificate in writing exempt any factory from all or any of such provisions subject to such conditions as he may specify therein. Such certificate may at any time be revoked by the Chief Inspector. _______________________________________________________________________________________________ SCHEDULE XI MANUFACTURE OF POTTERY 1. Savings: These provisions shall not apply to factory in which any of the following articles, but no other pottery, are made— (a) Unglazed or salt glazed bricks and tiles; and (b) architectural terra-cotta made from plastic clay and either unglazed or glazed with a leadless glaze only. 2. Definitions: For the purposes of this schedule— (a) “pottery” includes earthenware,stoneware, porcelain, china tiles and any other articles made from such clay or from a mixture containing clay and other materials such as quartz, flint,feld spar and gypsum; (b) “efficient exhaust draught” means localised ventilation effected by mechanical or other means for removal of dust or fume so as to prevent it from escaping into air of any place in which work is carried on. No draught shall be deemed efficient which fails to remove effectively dust or fume generated at the point where dust or fume originates. (c) “fettling” includes scalloping, towing, sand papering, sand sticking, brushing or any other process of cleaning of potteryware in which dust is given off; (d) “leadless glaze” means a glaze which does not contain more than one percent of its dry weight, of a lead compound calculated as lead monoxide; (e) “low solubility glaze” means a glaze which does not yield to dilute hydrochloric acid more than 5% of its dry weight, of a soluble lead compound calculated as lead monoxide when determined in the manner described below:— A weighed quantity of the material which has been dried at 100◦C and thoroughly mixed shall be continuously shaken for one hour at the common temperature with 1000 times its weight of an aqueous solution of hydrochloric acid containing 0.25% by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered. The lead salt contained in the clear filtrate shall then be precipitated as lead sulphide and weighed as lead sulphate; (f) “ground or powdered flint or quartz” does not include natural sands; and (g) “potter’s shop” includes all places where pottery is formed by pressing or by any other process and all places where shaping, fettling or other treatment of pottery articles prior to placing for the biscuit fire is carried on. 3. Efficient exhaust draught: The following processes shall not be carried on without the use of an efficient exhaust draught— (a) all processes involving the manipulation or use of a dry and unfritted lead compound; (b) fettling operations of any kind, whether on greenware or biscuit, provided that this shall not apply to the wet fettling, and to the occasional finishing of pottery articles without the aid of mechanical power; (c) shifting of clay dust or any other material for making tiles or other articles by pressure, except where— (i) this is done in a machine so enclosed as to effictually prevent the escape of dust; or (ii) the material to be shifted is so damp that no dust can be given off; (d) pressing of tiles from clay dust, an exhaust opening being connected with each press, and pressing from clay dust of articles other than tiles, unless the material is so damp that no dust is given off; (e) fettling of tiles made from clay dust by pressure, except where the fettling is done wholly on, or with damp material, and fettling of other articles made from clay dust, unless the material is so damp that no dust is given off; (f) process of loading and unloading of saggars where handling and manipulation of ground and powdered flint, quartz, alumina or other materials are involved;
![Page 137: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/137.jpg)
137 (g) brushing of earthenware biscuit, unless the process is carried on in a room provided with efficient general mechanical ventilation or other ventilation which is certified by the Inspector of Factories as adequate having regard to all the circumstances of the case; (h) fettling of biscuitware has been fired in powdered flint or quartz except where this is done in machines so enclosed as to effectually prevent the escape of dust; (i) where cleaning after the application of glaze by dipping or other process; (j) crushing and dry grinding of materials for pottery bodies and saggars, unless carried on in machines so enclosed as to effectively prevent the escape of dust or is so damp that no dust can be given off; (k) sieving or manipulation of powdered flint, quartz, clay grog or mixture of these materials unless it is so damp that no dust can be given off; (l) grinding of tiles on a power driven wheel unless an efficient water spray is used on the wheel; (m) lifting and conveying of materials by elevators and conveyors unless they are effectively enclosed and so arranged as to prevent escape of dust into the air in or near to any place in which persons are employed; (n) preparation or weighing out of flow material,lawning of dry colours, colour dusting and colour blowing; (o) mould making unless the bins or similar receptacles used for holding of plaster of paris are provided with suitable covers; and (p) manipulation of calcined material unless the material has been made and remain so wet that no dust is given off. 4. Separation of processes: Each of the following processes shall be carried on in such a manner and under such conditions as to secure effectual separation from one another, and from other wet processes:— (a) crushing and dry grinding or sieving of materials, fettling, pressing of the tiles, drying of clay and greenware, loading and unloading of saggars; and (b) all processes involving the use ofa dry lead compound. 5. Prohibition on use of glaze: No glaze which is in leadless glaze or a low solubility glaze shall be used in a factory in which pottery is manufactured. 6. Prohibition relating to women and young persons: No woman or young person shall be employed or permitted to work in any of operations specified in paragraph 4, or at any place where such operations are carried on. 7. Provision of screen to potter’s wheels: The potter’s wheel (Jolly and Jigger) shall be provided with screens or so constructed as to prevent clay scrapings being thrown off beyond the wheel. 8. Control of dust during cleaning: (1) All practical measures shall be taken by damping or otherwise to prevent dust arising during cleaning of floors; (2) Damp saw dust or other suitable material shall be used to render the moist method effective in preventing dust rising into the air during the cleaning process which shall be carried out after work has ceased. 9. Floor of certain work rooms: The floors of potter’s shops, slip houses, dipping houses and ware cleaning rooms shall be hard, smooth and impervious and shall be thoroughly cleaned daily by an adult male using a moist method. 10. Protective equipment: (1) The occupioer shall provide and maintain suitable overalls and head coverings for all persons employed in process included under paragraph 3. (2) The occupier shall provide and maintain suitable aprons of a waterproof or similar material, which can be sponged dailly, for the use of the dippers, dippers assistants, throwers, jolly workers, casters, mould makers and filters press and pug mill workers. (3) Aprons provided in pursuance of paragraph 10 (2) shall be thoroughly cleaned daily by the wearers by sponging or other wet process. All overalls and head coverings shall be washed,cleaned and mended at least once a week and this washing, cleaning or mending shall be provided for by the occupier. (4) No person shall be allowed to work in emptying sacks of dusty materials, weighing out and mixing of dusty materials and charging of ball mills and plungers without wearing a suitable and efficient dust respirator. 11. Washing facilities: The ocupier shall provide and maintain, in a clean state and in good repair for the use of all persons employed in any of the processes specified in paragraph 3— (a) a wash place under cover with either— (i) a trough with smooth impervipus surface fitted with a waste pipe without plug, and of sufficient length to allow at least 60 centimetres for every five such persons employed at any one time, and having a constant supply of clean water from taps or jets above the trough at intervals of not more than 60cm. Or (ii) at least one strap or stand pipe for evey five such persons employed at any one time, and having a constant supply of clean water, the tap or stand pipe being spaced not less than 120 cm apart; and (b) a sufficient supply of clean towels made of suitable material changed daily, with sufficient supply of nail brushes and soap. 12. Time allowed for washing: Before each meal before the end of the day’s work, at least ten minutes in addition to the regular meal times, shall be alowed for washing to each person employed in any of the processes mentined in paragraph 3. 13. Messroom: (1) There shall be provided and maintained for use fo all persons remaining within the premises during the rest intervals, a suitable messroom providing accommodation of 0.93 square metre per head and furnished with— (a) a sufficient number of tables and chairs or benches with back rest; (b) arrangements for washing utensils; (c) adequate means for warming food; and (d) adequate quanity of drinking water. (2) The room shall be adequately ventilated by the circulation of fresh air and placed under the charge of a responsible person and shall be kept clean.
![Page 138: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/138.jpg)
13814. Food,drinks etc. prohibited in workrooms: No food ,drink, pan and supari or tobacco shall be brought into, or consumed by any worker in any workroom in which any of the processes mentioned in paragraph 3 are carried on and no person shall remain in any such room during intervals for meals or rest. 15. Cloakroom etc.: There shall be provided and maintained for the use of all persons employed in any of the processes mentined in paragraph 3— (a) a cloakroom for clothing put off during working hours and such accommodation shall be separate from any messroom; and (b) separate and suitable arrangements for the storage of protective equipment provided under paragraph 10. 16. Medical facilities and records of examinations and tests: (1) The occupier of every factory in which manufacture of pottery is carried on, shall— (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 17. Medical examination by Certifying Surgeon: (1) Every worker employed in any process mentioned under paragraph 3, shall be examined by a Certifying Surgeon within 15days of his first employment. Such examination shall include tests for lead in urine and blood, ALA in urine,haemoglobin content, stippling of cells and pulmonary function tests and chest X-ray for workers engaged in processes mentioned in clauses (a) and (n) of paragraph 3 and pulmonary function tests and chest X-rays for the others. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated. (2) All persons employed in any of the processes included under sub-paragraphs 3 (a) and 3 (n) shall be certified by a Certifying Surgeon once in every three calendar months. Those employed in any other processes mentioned in the remaining sub-paragraphs of paragraphph 3 shall be examined by a Certifying Surgeon once in every twelve calendar months. Such examinations in respect of all the workers shall include all the tests as specified in sub-paragraph (1) except chest X-ray which wiil be once in three years. (3) The Certifying Surgeon after examining a worker shall isseu certificate of Fitness in Form 28. The record of examination carried out shall be entered in the certificate and the certificate shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said peson is unfit to work in the said processes. (6) No person who has been unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. 18. Exemption: If in respect of any factory the Chief Inspector of Factories is satisfied that all or any of the provisions of this schedule are not necessary for the protection of the persons employed in such factory, he may by a certificate in writing exempt such factory from all or any of such provisions subject to such conditions as he may specify therein. Such certificate may at any time be revoked by the Chief Inspector without assigning any reasons.
SCHEDULE XII CHEMICAL WORKS PART I 1. Application: This schedule shall apply to all manufacture and processes incidental thereto carried on in chemical works. 2. Definitions: For the purpose of this schedule—
(a) “Chemical works” means any factory or such parts of any factory as are listed in appendix ‘A’ to this schedule; (b) “efficient exhaust draught” means localised ventilation effected by mechanical or other means for the removal of
gas, vapour, fume or dust to prevent it from escaping into the air of any place in which work is carried on; (c) “bleaching powder” means the bleaching powder commonly called chloride of lime; (d) “chlorate” means chlorate or perchlorate; (e) “caustic” means hydroxide of potassium or sodium; (f) “chrome process” means the manufacture of chromate or bichromate of potassium or sodium, or the manipulation,
movement or other treatment of these substances; (g) “nitre or amino process” means the manufacture of nitro or amino derivatives of phenol and of benzene or its
homologues, and the making of explosives with the use of any of these substances;
![Page 139: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/139.jpg)
139(h) “permit to work system” means compliance with the procedures laid down under para 20 of part II; (i) “toxic substances” means all those substances which when they enter into the human body, through inhalation or
ingestion or absorption through skin in sufficient quantities, cause fatality or exert serious affliction of health or chronic harmful effects on the health of persons exposed to it due to its inherent chemical or biological effects. In respect of subststances whose TLV is specified in Rule 123-A exceeding the concentration specified therein would make the substance toxic;
(j) “emergency” means a situation or condition leading to a circumstances or set of circumstances in which there is danger to the life or health of persons or which could result in big fire or explosion or pollution to the work and outside environment, affecting the workers or neighbourhood in a serious manner, demanding immediate action.
(k) “dangerous chemical reaction” means high speed reactions, run-away reactions, delayed reactions etc. and are characterised by evolution of large quantities of heat, intense release of toxic or flammable gases or vapours, sudden pressure build-up etc.;
(l) “manipulation” means mixing, blending, filling, emptying, grinding, sieving, drying, packing, sweeping, handling, using etc.;
(m) “approved personal protective equipment” means items of personal protective equipment conforming to the relevant ISI specifications or in the absence of it, personal protective equipment approved by the Chief Inspector of Factories;
(n) “appropriate personal protective equipment” means that when the protective equipment is used by the worker, he shall have no risk to his life or health or body; and
(o) “confined space” means any space by reason of its construction as well as in relation to the nature of the work carried therein and where hazards to the persons entering into or working inside exist or likely to develop during working.
PART II General requirements applying to all the works in Appendix ‘A’ 1. House-keeping: (1) Any spillage of materials shall be cleaned up before further processing; (2) Floors,
platforms, stairways, passages and gangways shall be kept free from any obstructions. (3) There shall be provided easy means of access to all parts of the plant to facilitate cleaning.
2. Improper use of chemicals: No chemicals or solvents or empty containers containing chemicals or solvents shall be permitted to be used by workers for any purposes other than in the processes for which they are supplied. 3. Prohibition on the use of food etc.: No food , drink, tobacco, pan or any edible item shall be stored or heated or consumed on or near any part of the plant or equipment. 4. Cautionary notices and instructions: (1) Cautionary notices in a language understood by the majority of workers shall be prominently displayed in all hazardous areas drawing the attention of all workers about the hazards to health, hazards involving fire and explosion and any other hazard such as consequences of testing of material or substances used in the process of using any cotaminated container for drinking or eating, to which the worker’s attention should be drawn for ensuring their safety and health; (2) In addition to the above cautionary notice, arrangement shall be made to instruct and educate all the workers including illiterate workers about the hazard in the process including the specific hazards to which they may be exposed to, in the normal course of their work. Such instructions and education should also deal with the hazard involved in unauthorised and unsafe practices including the properties of substances used in the process under normal conditions as well as abnormal conditions and the precautions to be observed against each and every hazard. Further, an undertaking from the workers shall be obtained within one month of their employment and for old workers employed, within one month of coming into operation of the rules, to the effect that they have read the contents of the cautionary notices and instructions to all workers and all supervisory personnel shall include the significance of different types of symbols and colours used on the labels stuck or painted on the various types of containers and pipe lines.
5. Evaluation and provision of safeguards before the commencement of process: (1) Before commencing any process or any experimental work, or any new manufacture covered under appendix ‘A’, the occcupier shall take all possible steps to ascertain definitely all the hazards involved both from the actual operations and the chemical reactions including the dangerous chemical reactions. The properties of the raw materials used, the final products to be made and any by-products derived during manufacture, shall be carefully studied and provisions shall be made for dealing with any hazards including effects on workers, which may occur during manufacture; (2) Information in writing giving deatils of the process, its hazards and the steps taken or proposed to be taken from the design stage to disposal stage for ensuring the safety as in sub-para (1) above should be sent to the Chief Inspector at the earliest but in no case less than 15 days before commencing manufacture, handling or starage of any of items covered under appendix ‘A’, whether on experimental basis or as pilot plant or as trial production, or as large scale manufacture;
(3) The design, construction, installation, operation, maintenance and disposal of the buildings, plant and facilities shall take into consideration effective safeguards against all the safety and health hazards so evaluated;
(4) The requirements under the sub-paras (1) to (3) shall not act in lieu of or in derogation to , any other provisions contained in any Act governing the work.
![Page 140: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/140.jpg)
1406. Authorised entry: Authorised persons only shall be permitted to enter any section of the factory or plant. Where any dangerous operations or processes are being carried on or where dangerous chemical reactions are taking place or where hazardous chemicals are stored. 7. Examination of instruments and safety devices: (1) All instruments and safety devices used in the process shall be tested before taking into use and after carrying out any repair to them and examined once in a month by a competent person. Records of such tests and examinations shall be maintained in a register; (2) All instruments and safety devices used in the process shall be operated daily or as often as it is necessary, to ensure its effective and efficient working at all times. 8. Electrical installations: All electrical installations used in the process covered in appendix ‘A’ shall be of an appropriate type to ensure safety against the hazard prevalent in that area such as suitability against dust, dampness, corosion, flammability and explosivety etc. and shall conform to the relevant ISI specifications governing their construction and use for that area. 9. Handling and storage of chemicals: (1) The containers for handling and storage of chemicals shall be of adequate strength taking into consideration the hazardous nature of the contents. They shall also be provided with adequate labeling and colour coding arrangement to enable identification of the containers and their contents indicating the hazards and safe handling methods and shall conform to the respective ISI standards. The instructions given in the table shall be strictly adhered to. Damaged containers shall be handled only under supervision of a knowledgable and responsible person and spillage shall be rendered innocuous in aq safe manner using appropriate means; (2) The arrangements for the storage of chemicals including charging of chemicals in reaction vessels and containers shall be such as to prevent any risk of fire or explosion or formation of toxic concentration of substances above the limits specified in Rule 128; (3) Without prejudice to the generality of the requirements in sub-para (2) above, the arrangements shall have suitable facilities and shall enable the maintenance of safe levels in vessels and containers. Such arrangements shall also take into consideration, the type of flooring and the capacity of flooring and the compatibility requirements of substances with other chemicals stored nearby; (4) (a) Storage of chemicals and intermediate products, which are highly unstable or reactive or explosive shall be limited to the quantities required for two months use. (b) Whenever the quantities laid down in the above clause (a) are to be exceeded, the permission of the Chief Inspector shall be obtained; (c) Notwithstanding anything contained in clause (a) and (b) above, the Chief Inspector of Factories may direct any factory carrying out processes covered in appendix ‘A’ to further limit the storage of hazardous substances to quantities less than two months on considerations of safety; (5) Standby arrangements equal to the biggest container shall always be available to transfer the toxic substances quickly into the standby storage facility if any defect develops in any of the containers resulting in the release of toxic substances. (6) Any storage facility constructed using non-metallic material such as Fibreglass, Reinforced plastics (FRP), all glas vessels etc. shall have adequate strength to withstand the stress, if any, exerted by the contents and shall be properly anchored. Working platforms, access ladders, pipelines etc., used in such storage facility shall not have any support on the structure of the storage facility and shall be independantly supported. 10. Facility for isolation: The plant and equipment shall be so constructed and maintained as to enable quick isolation of plant or part of plant or equipment, with appropriate indication. One copy of the layout plan indicating the isolation facilities shall always be available with the security personnel, the maintenance and the health and safety personnel and these isolation facilities shall be checked for its effectiveness once in a month. 11. Personal protective equipment: (1) All workers exposed to the hazards in the processes covered by this schedule shall be appropriate and approved type of personnel protective equipment. Such equipment shall be in a clean, sterile and hygienic condition before isse; (2) The occupier shall arrange to inform, educate and supervise all the workers in the issue of personnel protective equipment while carrying out the job; (3) As regards any doubt regarding the appropriateness of any personnel protective equipment, the decision of the Chief Inspector shall be final. 12. Alarm systems: (1) Suitable and effective alarm systems giving audible and visible indications, shall be installed at the control room as well as in all strategic locations where process control arrangements are available so as to enable corrective action to be taken before the operational parameters exceed the predetermined safe levels or lead to conditions conducive for an outbreak of fire or explosion to occur. Such alarm system shall be checked daily and tested every month at least once to ensure its performance-efficiency at all times; (2) The Chief Inspector of Factories may direct such system to be installed in case of plants or processes where toxic materials are being used and spillage or leakage of which may cause wide spread poisoning in or around the plant. 13. Control of escape of substances into the work atmosphere: (1) Effective arrangements such as enclosure or by-pass or efficient exhaust draught, maintenance of negative pressure etc. shall be provided in al plants, containers, vessels, sewers, drains, flues, ducts, culverts and burried pipes and equipment, to control the escape and spread of substances which are likely to give rise to fire or explosion or toxic hazards during normal working and in the event of accident or emergency; (2) In the event of the failure of the arrangements for control resulting in the escape of substances in the work atmosphere, immediate steps shall be taken to control the process in such a manner, that further escape is brought down to the safe level; (3) The substances that would have escaped into the work atmosphere before taking immediate
![Page 141: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/141.jpg)
141steps as required in sub-para (2), shall be rendered innocuous by diluting with air or water or any other suitable agent or by suitably treating the substances. 14. Control of dangerous chemical reactions: Suitable provisions, such as automatic and or remote control arrangements, shall be made for controlling the effects of dangerous chemical reactions. In the event of failure of control arrangements, automatic flooding or blanketing or other effective arrangements shall come into operation. 15. Testing, examination and repair of plant and equipment:―
(1) All parts of plant, equipment and machinery used in the process which in the likely event of their failure may give rise to an emergent situation shall be tested by a competent person before commencing process and re-tested at an interval of two years or after carrying out repairs to it.The competent person shall identify the parts of the plant,equipment and machinery required to be tested as aforesaid and evolve a suitable testing procedure. In carrying out the test as mentioned above in respect of pressure vessels or reaction vessels, the following precautions shall be observed, namely:― (a) before the test is carried out, each vessel shall be thoroughly cleaned and examined externally, and as far as practicable internally also for surface defects, corrosion and foreign matters. During the process of cleaning and removal of sludge, if any, all, due precautions shall be taken against fire or explosion, if such sludge is of pyropheric nature or contains spontaneously combustible chemicals; (b) as soon as the test is completed, the vessel shall be thoroughly dried internally and shall be clearly stamped with the marks and figures indicating the person by whom testing has been done and the date of test; and (c) any vessel which fails to pass the test or which for any other reason is found unsafe for use shall be destroyed or rendered unusable under intimation to the Chief Inspector.
(2) All parts of plant, equipment, machinery which in the likely event of failure may give rise to an emergent situation shall be examined once in a month by the competent person. (3) Records of testing and examination referred to in paragraph (1) and (2) shall be maintained as long as that part of the plant, equipment and machinery are in use.
(4) all repair work including alteration, modification and addition to be carried out to the plant, equipment and machinery shall be done under the supervision of a responsible person who shall evolve a procedure to ensure safety and health of persons doing the work. When repairs or modification is done on pipe lines, and joints are required to be welded, butt welding of joints shall be preferred. Wherever necessary, the resposible person shall regulate the aforesaid work through a ‘Permit to work system’.
16. Staging: (1) All staging that is erected for the purpose of maintenance work or repair work or for work connected with entry into confined spaces and used in the processes included in appendix ‘A’ shall be stable, rigid and constructed out of substantial material of adequate strength. Such staging shall conform to the respective Indian Standard Specifications;
(2) Staging shall not be erected over any closed or open vessel unless the vessel is so constructed and ventilated to prevent exposure of persons working on the stages; (3) All the staging constructed for the purpose of this para shall have appropriate access which are safe and shall be fitted with proper hand rails to a height of one metre and toe board. 17. Seating arrangements: The seating arrangements provided for the operating personnel working in processes covered in appendix ‘A’ shall be located in a safe manner as to prevent the risk of exposure to toxic, flammable and explosive substances evolved in the work environment in the course of manufacture or repair or maintenance; either due to failure of plant and equipment or due to the substances which are under pressure, escaping into the atmosphere. 18. Entry into or work in confined spaces: (1) The occupier of every factory to which the provisions of this schedule apply, shall ensure the observance of the following precautions before permitting any persons to enter or work inside the confined spaces:— (a) identify all confined spaces and the nature of the hazards that are encountered in such spaces, normally or abnormally, and arrange to develop the most appropriate safeguards for ensuring the safety and health of persons entering into or working inside the confined spaces; (b) regulate the entry or work inside the confined spaces through a permit to work system which should include the safeguards so developed as required under sub-clause (a) above; (c) before testing the confined spaces for entry into or work, the place shall be rendered safe by washing or cleaning with neutralising agents; or purging with steam or inert gase and making adequate forced ventilation arrangements or such measure which will render the confined spaces safe;
(d) shall arrange to carry out tests as are necessary for the purpose by a competent person and ensure that the confined space is safe for the persons to enter or work. Such testing shall be carried out as often as is necessary during the course of work to ensure its continued safety; (e) shall arrange to educate and train the personnel who would be required to work in confined spaces about the hazards involved in the work. He shall also keep in readiness the appropriate and approved personnel protective equipment including arrangements for rescue, resurrection and first-aid, and shall arrange supervision of the work at all times by a responsible and knowledgable person.
(2) The Manager shall maintain a log of all entry into or work in, confined spaces and such record shall contain the details of the persons assigned for the work, the location of the work and such other details that would have bearing on the safety and health of the persons assigned for this work. The log book so maintained shall be retained as long as the concerned workers are in service and produced to the Inspector when demanded.
19. Maintenance work etc: (1) All the work connected with the maintenance of plant and equipment including cleaning of empty containers which have held hazardous substances used in the processes covered in the schedule, shall be carried out under permit to work system employing trained personel and under the supervision of responsible person, having knowledge of the hazards and precautions required to deal with them; (2) Maintenance work shall be carried out
![Page 142: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/142.jpg)
142in such a manner that there is no risk to persons in the vicinity or to persons who pass by. If necesary, the place of such work shall be cordoned off or the presence of unconnected persons effectively controlled.
20. Permit to work system: The permit to work system shall inter alia include the observance of the following precautions while carrying out specified work to be subjected to the permit to work system:— (a) all work subject to the permit to work system shall be carried out under the supervision of a knowledgeable and responsible person; (b) all parts of plant or machinery or equipment on which permit to work system is carried out , shall remain isolate from other parts throughout the period of permit to work and the space of working including the partrs of plant, machinery shall be rendered safe by cleaning, purging ,washing etc.; (c) All work subject to the permit to work system shall have pre-determined work procedure which integrate to safety with the work. Such procedurre shall be reviewed whenever any change occuring in material or equipment so that continued safety is ensured; (d) persons who are assigned to carry out the permit to ork system shall be physically fit in all respects taking into consideration the demands and nature of the work before entering into the confined space. Such person shall be adequately informed about the correct work procedures as well as the precautions to be observed while carrying out permit to work system; (e) adequate rescue arramgements wherever considered necessary and adequate first-aid, rescue and resurrectioin arrangements shall be available in good working condition near the place of work while carrying out the permit to work system, for use in emergency; (f) appropriate and approved personal protective equipment shall be used while carrying out the ‘permit to work system’; (g) after completion of work subject to the permit to work system the person responsible shall remove all the equipment and tools and restore to the original condition as to prervent any danger while carrying out regular process. 21. Safety sampling personnel: The occupier shall ensure the safety of persons assigned for collecting samples by instructing them on the safe procedures. Such personnel shall be provided with proper and approved personal protective equipment, if required. 22. Ventilation: Adequate ventilation arrangements shall be provided and maintained at all times in the process area where dangerous or toxic or flammable or explosive substance could be evolved. These arrangements shall ensure that concentrations, which are either harmful or could result in explosion are not permitted to be built up in the work environment. 23. Procedure for meeting emergencies: (1) The occupier of every factory carrying out the works covered in appendix ‘A’ shall arrange to identify all types of possible emergencies that could occur in the processes during the course of work or while carrying out mauntenance work or repair work. The emergencies so identified shall be reviewed every year. (2) The occupier shall formulate a detailed plan to meet all such identified emergencies including arrangements for summoning outside help for rescue and fire fighting and arrangements for making available urgent medical facilities. (3) The occupier shall send the list of emergencies and the details of procedures and plans formulated to meet the emergencies, to the Chief Inspector of Factories. (4) The occupier shall arrange to install distinctive and recognisable warning arrangements to caution all persons inside the plant as well as the neighbouring community, if necessary, to enable evacuation of persons and to enable the observance of emergency procedures by the persons who are assigned emergency duties. All concerned must be well informed about the warning arangements and their meaning. The arrangements must be checked for its effectiveness every month.
(5) Alternate power supply arrangements shall be made and interlocked with the normal power supply system so as to ensure constant supply of power to the facilities and equipment meant for compliance to the requirements of paragraphs 10, 11, 12, 13, 14,, 18, 22 and this paragraph of part II, part III, part IV and part V of this schedule. (6) The occupier shall arrange to suspend the further process work in a place where emergency is established and shall forthwith evacuate all persons in that area except workers who have been assigned emergency duties. (7) All the employees of the factory shall be trained about the action to be taken by them including evacuation procedures during emergencies. (8) All emergency procedures must be rehearsed every three months. Deficiencies, if any, in the achievement of the objectives shall suitably be corrected. (9) The occupier shall arrange to have 10% of the workers trained in the use of first-aid fire fighting appliances and in the rendering of specific first-aid measures taking into consideration the special hazards of the particular process. (10) The occupier shall furnish immediately on request the specific chemical idenity of the hazardous substance to the treating physician when the information is needed to administer proper emergency or first-aid treatment to exposed persons 24. Danger due to effluents: (1) Adequate precautions shall be taken to prevent the mixing of effluents from different processes and operations which may cause dangerous poisonous gases to be evolved; (2) Effluents which contain or give rise in the presence of other effluents to poisonous gases shall be provided with independent drainage systems to ensure that they may be trapped and rendered safe.
PART III Fire and explosion risks 1. Sources of ignition including lighting installation: (1) No internal combustion engine and no electric motor or other electrical equipment, and fittings and fixures capable of generating of sparks or otherwise causing combustion or
![Page 143: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/143.jpg)
143other source of ignition or any naked light shall be installed or permitted to be used in the process area where there could be fire and explosion hazards; (2) All hot exhaust pipes shall be installed outside a building and other hot pipes or hot surface or surfaces likely to become hot shall be suitably protected; (3) The classification of work area in terms of its hazard potential and the selection of electrical equipment or other equipment that could constitute a source of ignition shall be in accordance with the respective Indian Standard; (4) Where a flammable atmosphere may be prevalent or could occur, the soles of footwear worn by workers shall have no metal on them, and the wheels of trucks or conveyors shall be of conductive type; (5) All tools and appliances used for work in this area shall be of non-sparking type; (6) Smoking in process areas where there are risks of fire and explosion shall be prohibited and warning notices in the language understood by majority of workers shall be pasted in the factory prohibiting smoking into specified areas. 2. Static electricity: (1) All machinery and plant, particularly pipelines and belt drives, on which static charge is likely to accumulate, shall be effectively earthed. Receptacles for flammable liquids shall have metallic connections to the earthed supply tanks to prevent static sparking. Where necessary, humidity shall be regulated; (2) Mobile tanker wagons shall be earthed during filling and discharge and precautions shall be taken to ensure that earthing is effective before such filling or discharge takes place. 3. Lightning protection: Lightning protection arrangement shall be fitted where necessary, and shall be maintained. 4. Process heating :The method of providing heat for a process likely to result in fire and explosion shall be as safe as possible and where the use of naked flame is necessary, the plant shall be so constructed as to prevent any escaping flammable gas, vapour or dust coming into contact with the flame or exhaust gases or other sources likely to cause ignition. Wherever possible, the heating arangement shall be automatically controlled at a predetermined temperature below the danger temperature. 5. Leakage of flammable liquids: (1) Provision shall be made to confine by means of bund walls, dykes,sumps etc. possible leakages from storage vessels containing flammable liquids; (2) Waste material in contact with flammable substances shall be disposed off suitably under the supervision of knowledgeable and responsible person; (3) Adequate and suitable fire-fighting appliances shall be installed in the vicinity of such vessels. 6. Safety valves: Every still and every closed vessel in which gas is evolved or into which gas is passed and in which the pressure is liable to rise above the atmospheric pressure, shall have attached to it a pressure gauge and a proper safety valve or other equally efficient means to relieve the pressure. These appliances shall be maintained in good conditioin. 7. Installation of pipeline etc.: All pipelines carrying flammable or explosive substances shall be protected from mechanical damage and shall be examined by a responsible person once in a week to detect any deterioration or defects or accumulation of flammable or explosive substances and record kept of any defects found and repairs made. 8. Fire fighting systems: (1) Every factory employing 500 or more persons and carrying out processes listed in appendix ‘A’ shall provide— (a) Trained and responsible fire fighting squad so as to efeectively handle the fire fighting and life saving equipment in the event of fire or other emergency. Number of persons in this squad will necessarily depend upon the size of risk involved, but in case shall be less than 8 such trained persons to be available at any time. The squad shall consist of watch and ward personnel, fire pump men and departmental supervisors and operators trained in the operation of fire and emergency services; (b) Squad leaders shall preferably be trained in a recognised government institution and their usefulness enhanced by providing residence on the premises; (c) Squad personnel shall be provided with clothing and equipment including helmets, boots and belts. (2) A muster roll showing the duties allocated to each member on the squad shall be prepared and copies supplied to each leader as well as displayed in prominent places so as to be easily available for reference in case of emergency. (3) The pumpman shall be thoroughly conversant with the location of all appliances. He shall be responsible for maintaining all fire fighting equipment in proper working order. Any defect coming to his notice shall be immediately brought to the notice of the squad leader. (4) As far as is practicable, the fire pump room and the main gate(s) of the factory be connected to all manufacturing or storing areas through telephone interlinked and placed in a convenient location near such areas.
PART IV Risks of toxic substances 1. Leakage: (1) All plants shall be so designed and constructed as to prevent the escape of toxic substances. Where necessary, separartebuildings, rooms or protective structures shall be used for the dangerous stages of the process and the buildings shall be so designed as to localise any escape of toxic substances; (2) Catch pits, bund walls, dykes or other suitable safeguards shall be provided to restrict the serious effects of such leakages. Catch pits shall be placed below joints in pipelines where there is danger involved to maintenance and other workers from such leakage. 2. Drainage: Adequate drainage shall be provided and shall lead to collection tanks specifically provided for this purpose wherein deleterios material shall be neutralised, treated or otherwise rendered safe before it is discharged into public drains or sewers. 3. Covering of vessels: (1) Every fixed vessel or structure containing any toxic substance and not so covered as to eliminate all reasonable risk of accidental contact of any portion of the body of a worker, shall be so constructed as to avoid physical contact; (2) Such vessel shall unless its edge is at least 90 centimetres above the adjoining ground or platform, be securely fenced to a height of at least 90 cm above such adjoining ground or platform; (3) Where such
![Page 144: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/144.jpg)
144vessels adjoin and the space between them, clear of any surrounding brick or other work is either less than 45 cm in width or is 45 or more centimetres in width, but is not securely fenced on both sides to a height of at least 90 cm., secure barrier shall be so placed as to prevent passage between them; Provided that sub-paragrah (2) of this paragraph shall not apply to— (a) staurators used in the manufacture of sulphate of ammonia; and (b) that part of the sides of brine-evaporating pans which require raking, drawing or filling. 4. Continuous exhaust arrangement: (1) Any process evolving toxic vapour, gas, fume and substance shall have efficient exhaust draught; such arrangement shall be interlocked in the process control wherever possible; (2) In the event of failure of continuous exhaust arrangement, means shall be provided to automatically stop the process. 5. Work bench: All the work benches used in processes involving the manipulation of toxic substances, shall be graded properly and shall be made of smooth impervious surface which shall be washed daily after the completion of work. 6. Waste disposal: (1) There shall be provided a suitable receptacle made of non-absorbable material with tightly fitting cover for depositing waste material soiled with toxic substances and the contents of such receptacle shall be destroyed by burning or using other suitable methods under the supervision of a responsible person; (2) during the course of manufacture, whenever any batch of intermediate products having toxicity is rejected on considerations of quality, sufficient precautions shall be taken to render them innocuous or otherwise treat them or inactivate them before disposal; (3) The empty containers of toxic substances shall be cleaned thoroughly before disposal under the supervision of a responsible person.
PART V Special provision 1. Special precautions for Nitro and Amino processes: (1) Unless the crystallised nitro or amino substances or any of its liquor is broken or agitated in a completely enclosed process so as not to give rise to dust or fume, such process shall be carried on under an efficient exhaust draught or by adopting any other suitable means in such a manner as to prevent the escape of dust or fume in the working atmosphere; (2) No part of the plant or equipment or implements which was in contact with nitro or amino compounds shall be repaired or handled unless they have been emptied and thoroughly cleaned and decontaminated; (3) Filling of containers with nitro or amino compounds shall be done only by using a suitable scoop to avoid physical contact and the drying of the containers in the stove shall be done in such a manner that the hot and contaminated air from the stove is not drawn into the workroom; (4) Processes involving the steaming into or around any vessel containing nitro or amino or its raw materials shall be carried out in such a manner that the steam or vapour is effectively prevented to be blown back into the working atmosphere; (5) Suitable antidotes such as methylene blue injections shall always be available at designated places of work for use during emergency involving the poisoning with nitro or amino copmpounds. 2. Special precautions for ‘chrome processes’: (1) Grinding and sieving of raw materials in chrome processes shall be caried on in such a manner and under such conditions as to secure effective separation from any other processes and under an efficient exhaust draught; (2) There shall be washing facilities located very near to places where wet chrome processes such as leaching, acidification, sulphate settling, evaporation, crystallisatioon, centrifugation or packing are carried out, to enable quick washing of effected parts of body with running water; (3) Weekly inspection of hands and feet of all persons employed in chrome process shall be done by a qualified nurse and record of such inspections shall be maintained in a form approved by the Chief Inspector of Factories; (4) There shall be always available at designated places of work suitable ointment such as glycerine, vaseline etc. and water proof plaster in a separate box readily accessible to the workers so as to protect against perforation of nasal septum. 3. Special precautions for processes carried out in all glass vessels: (1) Processes and chemical reactions such as manufacture of vinyl chloride, benzyl chloride etc., which are required to be carried out in all glass vessels shall have suitable means like substantial wire-mesh-covering to protect persons working nearby in the event of breakage of glass vessel; (2) Any spillage or emission of vapour from the all glass vessel due to breakage, shall be immediately inactivated or rendered innocuous by suitable means such as dilution with water or suitable solvents so as to avoid the risks of fire or explosion or health hazards. 4. Special precautions for processes involving chlorate manufacture: (1) Crystallisation, grinding or packing of chlorate shall not be done in a place used for any other purposes and such places shall have hard, smooth and impervious surface made of non-combustible material. The place shall be thoroughly cleaned daily. (2) The personal protective equipment like overall etc. provided for the chlorate workers shall not be taken from the place of work and they shall be thoroughly cleaned daily; (3) Adequate quantity of water shall be available near the place of chlorate process for use during fire emergency; (4) Wooden vessels shall not be used for the crystallisation of chlorate or to contain crystallised ground chlorate. 5. Special precautions in the use of plant and equipments made from reinforced plastics: (1) All plants and equipments shall conform to appropriate Indian or any other National standard; (2) Care shall be taken during storage, transport, handling and installation of plant and equipments to avoid accidental damage; (3) All plant and equipments shall be installed in such a way as to ensure that loads are distributed as intended in design or as per the recommendations of the manufacturers; (4) All pipe work shall be supported so that total loads local to the branches on the vessel or tank do not exceed their design values; (5) After erection all plant and equipments shall be subjected to a pressure test followed by a thorough examination by a competent person. The test and examination shall be as per relevant standard. Acertificate of
![Page 145: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/145.jpg)
145test and examination by competent person shall be obtained and kept available at site; (6) All plant and equipments shall be subjected to periodical test and examintion and record maintained as per paragraph 15 in part II of this schedule; (7) Plant and equipments during their use shall not be subjected to over filling or over loading beyond rated capacity.
PART VI Medical requirements 1. Decontamination facilities: In all places where toxic substances are used in processes listed in appendix ‘A’, the following provisions shall be made to meet an emergency:— (a) fully equipped first-aid box; (b) readily accessible means of drenching with water persons, parts of body of persons and clothing of persons who have been contaminated with such toxic and corrosive substances and such means shall be as shown in the table below:—
No. of persons employed at any time No. of drenching showers Upto 50 persons 2 Between 51 to 100 3 ,, 101 to 200 3+1 for every 50 persons thereafter ,, 201 to 400 5+1 for every 100 persons thereafter 401 and above 7+1 for every 200 persons thereafter
(c) a sufficient number of eye wash bottles filled with distilled water or suitable liquid, kept in boxes or cupboards conveniently situated and clearly indicated by a distinctive sign which shall be visible at all times. 2. Occupational health centre: In all the factories carrying out processes covered in Appendix ‘A’ there shall be provided and maintained in good order an occupational health centre with facilities as per scale laid down hereunder:— (1) For factories employing upto 50 workers:— (a) the services of a qualified medical practitioner hereinafter known as Factory Medical Officer, available on a retainership basis, in his notified clinic near to the factory for seeking medical help during emergency. He will also carry out the pre-employment and periodical medical examinations as stipulated in paragraph 4 of this part; (b) a minimum of five persons trained in first-aid procedures, amongst whom at least one shall always be available during the working period; (c) A fully equipped first aid box. (2) For factories employing 51 to 200 workers:— (a) the occupational health centre shall have a room having a minimum floor area of 15 sq. m. with floors and walls made of smooth, hard and impervious surface and shall be adequately illuminated, ventilated and equipped; (b) a part time Factory Medical Officer will be in overall charge of the centre who shall visit the factory minimum twice in a week and whose services shall be readily available during emergencies. (c) there shall be one qualified and trained dresser-cum-compounder on duty throughout the working period; (d) a fully equipped first-aid box.
(3) For factories employing above 200 workers:— (a) there shall be one full time Factory Medical Officer for factories employing upto 500 workers and one more medical officer for every 1000 workers or part thereof; (b) the occupational health centre in this case shall have a minimum of two rooms each having a minimun floor area of 15 sq.metres with floors and walls made of smooth, hard and impervious surface and shall be adequately illuminated, ventilated and equipped; (c) There shall be one trained nurse, one dresser-cum-compounder qand one sweeper-cum-ward boy throughout the working period; (d) The occupational health centre in this case shall be suitably equipped to manage medical emergencies. 3. Ambulance Van: (1) In every factory carrying out processes covered in appendix ‘A’, there shall be provided and maintained in good condition, a suitably constructed and fully equipped ambulance van as per Appendix ‘C’ manned by a full time driver-cum-mechanic and a helper, trained in first-aid for the purpose of transportation of serious cases of accidents or sickness unless arrangements for procuring such facility at short notice during emergencies have been made with the nearby hospital or other places. The ambulance van shall not be used for any purpose other than the purpose stipulated herein and will always be available near the Occupational Health Centre; (2) The relaxation to procure ambulance van from nearby places provided for in sub-para (1) above will not be applicable to factories employing more than 500 workers. 4. Medical examination: (1) Workers employed in processes covered in appendix ‘A’ shall be medically examined by a Factory Medical Officer in the following manner:— (a) Once before employment, to ascertain physical suitability of the person to do the particular job; (b) Once in a period of six months, to ascertain the health status of the worker; and (c) The details of pre-employment and periodical medical examinations carried out as aforesaid shall be recorded in the prescribed form.
(2) Any finding of the Factory Medical Officer revealing any abnormality or unsuitability of any person employed in the process shall immediately be reported to the Certifying Surgeon who shall in turn examine the concerned workers and communicate his findings within 30 days. If the Certifying Surgeon is of the opinion that the person so examined is required to be suspended from the process for health protection, he will direct the occupier accordingly, who shall not employ the said worker in the same process. However, the person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated;
![Page 146: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/146.jpg)
146 Provided that the Certifying Surgeon on his own may examine any other worker whom he feels necessary to be examined for ascertaining the suitability of his employment in the process covered in appendix ‘A’ or for ascertaining the health status of any other worker and his opinion shall be final. (3) No person shall be newly appointed without the certificate of fitness granted by the Factory Medical Officer. If the Factory Medical Officer declares a person unfit for being appointed to work in the process covered in appendix ‘A’, such person shall have a right to appeal to the Certifying Surgeon, whose opinion shall be final in this regard. (4) The worker suspended from the proces owing to the circumstances coverd in sub-para (2) shall be employed again in the same process only after obtaining the fitness certificate from the Certifying Surgeon and after making entries to that effect in the health register.
PART VII Additional welfare amenities 1. Washing facilities: (1) There shall be provided and maintained in every factory for the use of all the workers taps for washing, at the rate of one tap for every 15 persons including liquid soap in a container with tilting arrangements and nail brushes or other suitable means for effective cleaning. Such facilities shall be conveniently accessible and shall be kept in a clean and hygienic condition; (2) If washing facilities as required above are provided for women, such facilities shall be separate for them and adequate privacy at all times shall be ensured in such facilities. 2. Mess room facilities: (1) The occupiers of all the factories carrying out processes covered in Appendix ‘A’ and employing 50 workers or more, shall provide for all the workers working in a shift mess room facilities which are well ventilated and provided with tables and sitting facilities alongwith the provision of cold and hygienic drinking water facilities; (2) Such facilities shall include suitable arrangements for cleaning and washing and shall be maintained in a clean and hygienic condition. 3. Cloak room facilities: (1) The ocupier of every factory carrying out any process covered in Appendix ‘A’ shall provide for all the workers employed in the process cloak room facilities with lockers. Each worker shall be provided with two lockers, one for work clothing and another separately for personal clothing and the lockers should be such as to enable the keeping of the clothing in a hanging position; (2) The cloak room facilities so provided in pursuance of sub-para (1) shall be located as far as possible near to the facilities provided for washing in pursuance of para 1 (1). If it is not possible to locate the washing facilities, the cloak room facilities shall have adequate and suitable arrangements for cleaning and washing. 4. Special bathing facilities: (1) The occupier of any factory carrying out the processes covered under Appendix ‘B’ shall provide special bathing facilities for all the workers employed and such facilities shall be provided at the rate of 1 for 25 workers and part thereof, and shall be maintained in a clean and hygienic condition; (2) The occupier shall insist all the workers employed in the processes covered in Appendix ‘B’ to the bath after completion of the day’s or shift work using the bathing facilities so provided and shall also effectively prevent such of the workers taking bath in any place other than the bathing facilities; (3) Notwithstanding anything contained in sub-para (1) above, the Chierf Inspector may require in writing the occupier of any factory carrying out any other process for which in his opinion bathing facilities are essential from the health point of view, to provide special bathing facilities. PART VIII Duties of workers 1. Every worker employed in the processes covered in Appendix ‘A’ and Appendix ‘B’ shall not make any safety device or appliance or any guarding or fencing arrangement, inoperative or defective and shall report the defective condition of the aforesaid arrangements as soon as he is aware of any such defect. 2. Before commencing any work, all workers employed in processes covered in Appendix ‘A’ shall check their work place as well as the machinery, equipment or appliance used in the processes and report any mal-function or defect immediately to the supervisor or any responsible person of the management. 3. All the workers shall co-operate in all respects with the management while carrying out any work or any emergency duty assigned to them in pursuance of this schedule and shall always use all the personal protective equipments issued to them in a careful manner. 4. All workers employed in the processes covered in Appendix ‘A’ or Appendix ‘B’ shall not smoke in the process area or storage area. If special facilities are provided by the management, only such facilities should be used. 5. All the workers employed in the processes covered in Appendix ‘A’ shall remain in unauthorised place or carry out unauthorised work or improvise any arrangements or adopt short cut method or misuse any of the facilities provided in pursuance of the schedule, in such a manner as to cause risk to themselves as well as to others employed. 6. The workers shall not refuse undergoing medical examination as required under these rules.
PART IX
Restriction on the employment of young persons under 18 years of age, and women 1. The Chief Inspector of Factories may by an order in writing restrict or prohibit the employment of women and young persons under the age of 18,in any of the processes covered in Appendix ‘A’ of this schedule on consideratioon of health and safety of women and young persons.
![Page 147: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/147.jpg)
1472. Such persons who are restricted or prohibited from working in the process due to the order issued in pursuance of sub-para (1) above shall be provided with alternate work which is not detrimental to their health and safety. PART X Exemptions Power of exemption: The State Government or subject to the control of the State Government, the Chief Inspector may exempt from the compliance with any of the requirements of this schedule partly or fully, any factory carrying out processes covered in Appendix ‘A’if it is clearly and satisfatorily established by the occupier that the compliance with any of the requirements is not necessary to ensure the safety and health of persons employed, suitable and effective alternate arrangements are available to any of the requirements covered in this schedule. APPENDIX ‘A’ Any works or that part of works in which— (a) the manufacture, manipulation or recovery of any of the following is carried out:— (i) sodium, potassium, iron, aluminium, cobalt, nickel, copper, arsenic, antimony, chromium, zinc, selenium,magnesium, cadmium, mercury, beryllium and their organic and inorganic salts, alloys, oxides and hydroxides; (ii) ammonia, ammonium hydroxide and salts of ammonium; (iii) the organic or inorganic compounds of sulphurous, sulphuric, nitric, nitrous, hydrochloric, hydrofluoric, hydroiodic, hydrosulphuric, hydrobromic,boric; (iv) cyanogen compounds, cyanide compounds, cyanate compounds; (v) phosphorus and its compounds other than organic phosphorus insecticide; (vi) chlorine; (b) hydrogen sulphide is evolved by the decomposition of metallic sulphides; or hydrogen sulphide is used in the production of such sulphides; (c) bleaching powder is manufactured or chlorine gas is produced in chlor-alkali plants; (d) (i) gas tar or coal tar or bitumen or shale oil asphalt or any residue of such tar is distilled or is used in any process of chemicals manufacture; (ii) tar based synthetic colouring matters or their intermediates are produced; (e) nitric acid is used in the manufacture of nitro compounds; (f) explosives are produced with the use of nitro compounds; (g) aliphatic or aromatic compounds or their metallic and non-metallic derivatives or substituted derivatives—such as chloroform, ethylene glycol, formaldehyde, benzyle chloride, phenol, methyl ethyl ketone peroxide, cobalt carbonyl, tungsten carbide etc. are manufactured or recovered. APPENDIX ‘B’
Concerning special bathing accommodation in pursuance of para 4 of part IV 1. Nitro or amino process; 2. All chrome processes; 3. Process of distilling gas or coal tar or process of chemical manufacture in which tar is used; 4. Process involving manufacture, manipulation, handling or recovery of cyanogen compound, cyanide compound, cyanate compounds; 5. Process involving manufacture of bleaching powder or production chlorine gas in chlor-alkali plants; 6. Manufacture, manipulation or recovery of nickel and its compounds; 7. All processes involving the manufacture, manipulation or recovery of aliphatic or aromatic compounds or their derivatives or substitute derivatives APPENDIX ‘C’ Ambulance Ambulance should have the following equipments:— General: —A wheeled stretcher with folding and adjusting devices; Head of the stretcher must be capable of being tilted upward; —Fixed suction unit with equipments; —Fixed oxygen supply with equipments; —pillow with case; —Sheets; —Blankets; —Towels; —Emesis bag; —Bed pan; —Urinal; —Glass. Safety equipment: —Flares with a life of 30 minutes; —Flood lights; —Flash lights; —Fire extinguisher: dry powder type; —Insulated gauntlets. Emergency care equipment: Resuscitatioin: —Portable suction unit; —Portable oxygen unit; —Bag valve mask, hand operated artificial ventilation unit; —Airways; —Mouth gags; —Tracheostomy adaptors; —Short spine board; —I.V. Fluids with administration unit; —B.P. Manometer; —Cugg; —Stethoscope. Immobilization: —Long and short padded boards; —Wire ladder splints; —Triangular bandage; —Long and short spine boards.
![Page 148: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/148.jpg)
148Dressings : —Gauge pads-4″x 4″; —Universal dressing-10″x 36″; ―Roll of aluminium foils; —Soft roller bandages-6″x 5yards; —Adhesive tape in 3″ roll; ―Safety pins; —Bandage sheets; ―Burn sheets; Poisoning: ―Syrup of Ipecac, [Pre-packed in doses] ; ―Snake bite kit; —Drinking water. ―Activated charcoal, [pre-packed in doses] Emergency Medicines: as per requirement (under the advice of Medical Officer only.) SCHEDULE XIII
MANIPULATION OF STONE OR ANY OTHER MATERIAL CONTAINING FREE SILICA 1. Application : This schedule shall apply to all factories or part of factories in which manipulation of stone or any other material containing free silica is carried on. 2. Definitions: For the purpose of this schedule:― (a) “manipulation” means crushing, breaking, chipping, dressing, grinding, sieving, mixing, grading or handling of stone or any other material containing stone or any other material containing free silica or any other operation involving such stone or material; (b) “Stone or any other material containing free silica” means stone or any other solid material containing not less than 5% by weight of free silica. 3. Precautions in manipulation: No manipulation shall be carried out in a factory or part of a factory unless one or more of the following measures are taken, namely:―
(a) damping the stone or other material being processed; (b) providing water spray; (c) enclosing the process; (d) isolating the process; and (e) providing localised exhaust ventilation; ― are adopted so as to effectively control the dust in any place in the factory where any person is employed, at a level equal to or below the maximum permissible level for silica dust as laid down in table 2 apened in Rule 123-A; Provided that such measures as above said are not necessary if the process or operation itself is such that the level of dust created and prevailing does not exceed the permissible level referred to. 4. Maintenance of floors: (1) All floors or places where fine dust is likely to settle on and whereon any person has to work or pass shall be of impervious material and maintained in such condition that they can be thoroughly cleaned by a moist method or any other method which would prevent dust being airborne in the process of cleaning; (2) The surface of every floor of every work room or place where any work is carried on or where any person has to pass during the course of his work, shall be cleaned of dust once at least during each shift after being sprayed with water or by any other suitable method so as to prevent dust being airborne in the process of cleaning. 5. Prohibition relating to young person: No young person shall be employed or permitted to work in any of the operations involving manipulation or at any place where such operations are carried out. 6. Medical facilities and records of examinations and tests: (1) The occupier of every factory to which the schedule applies shall― (a) employ a qualified medical practitiooner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a); (2) the record of medical examination and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories which shall be kept readily available for inspection by the Inspector. 7. Medical examination by Certifying Syrgeon: (1) Every worker employed in the processes specified in paragraph 1 shall be examined by a Certifying Surgeon within 15 days of his first employment. Such medical examination shall include pulmonary function tests and chest X-ray. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated. (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every twelve months. Such examination shall, wherever the Certifying Surgeon considers appropriate, include all the tests as specified in sub-paragraph (1) except chest X-ray which will be once in three years. (3) The Certifying Surgeon after examining a worker shall issue a certificate of fitness in Form 28. The record of examination and re-examination carried out shall be entered in the certificate and the certificate shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2) including the nature and the results of the tests shall also be entered by the Certifying Surgeon in a health register in Form29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker he shall make a record of his findings in the said certificate and the health register. The entry of his findings in these documents should also include the period for which he considers that the said person is unfit for work in the said processes.
![Page 149: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/149.jpg)
149 (6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon after further examination, again certifies him fit for employment in those processes. 8. Exemption: If in respect of any factory, the Chief Inspector is satisfied that owing to the exceptional circumstances or infrequency of the processes or for any other reason, all or any of the provisions of this schedule is not necessary for protection of the workers in the factory, the Chief Inspector may by a certificate in writing, which he may in his discretion revoke at any time, exempt such factory from all or any of such provisions subject to such conditions, if any, as he may specify therein.
SCHEDULE XIV HANDLING AND PROCESSING OF ASBESTOS,MANUFACTURE OF ANY ARTICLE OF ASBESTOS AND ANY OTHER PROCESS OF MANUFACTURE OR OTHERWISE IN WHICH ASBESTOS IS USED IN ANY FORM. 1. Application: This schedule will apply to all fatories or parts of factories in which any of the following processes are carried on:― (a) breaking, crushing, disintegrating, opening, grating, grinding, mixing or sieving of asbestos; and any other processes, involving handling and manipulation of asbestos, incidental thereto; (b) all processes in the manufacture of asbestos textiles including preparatory and finishing processes; (c) making of insulation slabs or sections, composed wholly or partly of asbestos, and processes incidental thereto; (d) making or repairing of insulating mattresses, composed wholly or partly of asbestos, and processes incidental thereto; (e) manufacture of asbestos cardboard and paper; (f) manufacture of asbestos cement goods; (g) application aof asbestos by spray method; (h) sawing, grinding, turning, abrading and polishing in dry state of articles composed wholly or partly of asbestos; (i) cleaning of any room, vessel, chamber, fixure or appliance for the collection of asbestos dust; and (j) any other process in which asbestos dust is given off into the work environment. 2. Definitions: For the purposes of this schedule:―
(a) “asbestos” means any fibrous silicate mineral and any admixture containing actionalite,amosite,anthophyllite,dhrysolite, crocidolite, tremolite or any mixture thereof, whether crude,crushed or opened;
(b) “asbestos textiles” means yarn or cloth composed of asbestos or asbestos mixed with any other material; (c) “approved” means approved for the time being in writing by the Chief Inspector;
(d) “breathing apparatus” means a helmet or face piece with necessary connection by means of which a person using it breathes air free from dust; or any other approved apparatus; (e) “efficient exhaust draught” means localised ventilation by mechanical means for the removal of dust so as to prevent dust from escaping into air of any place in which work is carried on. No draught shall be deemed to be efficient which fails to control dust produced at the point where such dust originates;
(f) “preparing” means crushing, disintegrating and any other processes in or incidental to the opening of asbestos; (g) “protective clothing” means overalls and head covering, which (in either case) will when worn exclude asbestos
dust. 3. Tools and equipment: Any tools and equipment used in processes to which this schedule applies shall be such that
they do not create asbestos dust above the permissible limit or are equipped with efficient exhaust draught. 4. Exhaust draught: (1) An efficient exhaust draught shall be provided and maintained to control dust from the
following processes and machines:― (a) manufacture and conveying machinery namely:― (i) prerparing, grinding or dry mixing machines; (ii)carding,
cardwaste and ring spinning machines and looms; (iii) machines or other plant fed with asbestos; and (iv) machines used for the sieving, grinding, turning, drilling, abrading or polishing, in the dry state of articles, composed wholly or partly of asbestos;
(b) cleaning and grinding of cylinders or other partrs of a carding machine; (c) chambers, hoppers or other structures into which loose asbestos is delivered or passes; (d) work-benches for asbestos waste sorting or for other manipulation of asbestos by hand; (e) work places at which the filling or emptying of sacks, skips or other portable containers, weighing or other process
incidental thereto which is effected by hand, is carried on; (f) sack cleaning machines; (g) mixing and blending of asbestos by hand; and (h) any other process in which asbestos dust is given off into the work environment.
(2) Exhaust ventilation equipment provided in accordance with sub-paragraph (1) shall, while any work of maintenance or repair to the machinery, apparatus or other plant or equipment in connection with which it is provided is being carried on, be kept in use so as to produce an exhaust draught which prevents the entry of asbestos dust into the air of any work place. (3) Arrangements shall be made to prevent asbestos dust discharged from exhaust apparatus being drawn into the air of any work room.
(4) The asbestos bearing dust removed from any work room by the exhaust system shall be collected in suitable receptacles or filter bags which shall be isolated from all work areas.
![Page 150: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/150.jpg)
1505. Testing and examination of ventilation system:― (1) All ventilating systems used for the purpose of
extracting or suppressing dust as required by this schedule shall be examined and inspected once every week by a responsible person. It shall be thoroughly examined and tested by a Competent Person once in every period of twelve months. Any defects found by such examinations or test shall be rectified forthwith; (2) A register containing particulars of such examination and test and the state of the plant and the repairs or alterations (if any) found to be necessary shall be kept and shall be available for inspection by an Inspector.
6. Segragation in caseof certain processes: Mixing or blending of asbestos by hand or making or repairing of insulating mattresses composed wholly or partly of asbestos shall not be carried on in any room in which any other work is done.
7. Storage and distribution of loose asbestos: All loose asbestos shall, while not in use, be kept in suitable closed receptacles which prevent the escape of asbestos dust therefrom. Such asbestos shall not be distributed within a factory except in closed receptacles or in a totally enclosed systems of conveyance.
8. Asbestos sacks: (1) All sacks used as receptacles for the purpose of transport of asbestos within the factory shall be constructed of impermeable material and shall be kept in good repair; (2) A sack which has contained asbestos shall not be cleaned by hand beating but by machine, complying with paragraph 3 and sub-paragraph (4) of paragraph 4.
9. Maintenanceof floors and work place: (1) In every work room in which any of the requirements of this schedule apply― (a) the floors, work benches, machinery and plant shall be kept in a clean state and free from asbestos debris and suitable arrangements shall be made for the storage of asbestos not immediately required for use; and (b) the floors shall be kept free from any materials, plant or other articles not immediately required for the work carried on in the room, which would obstruct the proper cleaning of the floor.
(2) The cleaning as mentioned in sub-rule (1) shall so far as is practicable, be carried out by means of vacuum cleaning equipment so designed and constructed and so used that asbestos dust neither escapes nor is discharged into the air of any work place;
(3) When cleaning is done by any method other than that mentioned in sub-paragraph (2), the persons doing cleaning work and any other person employed in that room shall be provided with respiratory protective equipment and protective clothing;
(4) The vacuum cleaning equipment used in accordance with provisions of sub-paragraph (2), shall be properly maintained and after each cleaning operation, its surfaces kept in a clean state and free from asbestos waste and dust;
(5) Asbestos waste shall not be permitted to remain on the floors or other surfaces at the work place at the end of the working shift and shall be transferred without delay to suitable receptacles. Any spillage of asbestos waste occuring during the course of the work at any time shall be removed and transferred to the receptacles maintained for the purpose without delay. 10. Personal protective equipment: (1) An approved breathing apparatus and protective clothing shall be provided and maintained in good condition for use of every person employed― (a) in chambers containing loose asbestos; (b) in cleaning, dust settling or filtering chambers or apparatus; (c) in cleaning the cylinders, including the doffer cylinders, or other parts of a carding machine by means of hand-strickles; (d) in filling, beating or levelling in the manufacture or repair of insulating mattresses; and (e) in any other operation or circumstances in which it is impracticable to adopt technical means to control asbestos dust in the work environment within the permissible limit. (2) Suitable accommodation in conveniently accessible position shall be provided for the use of persons employed when putting on or taking off breathing apparatus and protective clothing provided in accordance with this rule and for the storage of such apparatus and clothing when not in use. (3) All protective clothing and breathing apparatus when not in use shall be stored in the accommodation provided in accordance with sub-rule (2) above. (4) All protective clothing in use shall be de-dusted under efficient exhaust draught or by vacuum cleaning and shall be washed at suitable intervals. The cleaning scedule and procedure should be such as to ensure the efficiency in protecting the wearer. (5) All breathing apparatus shall be cleaned and disinfected at suitable intervals and thoroughly inspected once every month by a responsible person. (6) A record of the cleaning and maintenance and of the condition of the breathing apparatus shall be entered in a register provided for that purpose which shall be readily available for inspection by an Inspector. (7) No person shall be employed to perform any work specified in sub-paragraph (1) for which breathing apparatus is necessary to be provided under that sub-paragraph unless he has been fully instructed in the proper use of that equipment. (8) No breathing apparatus provided in pursuance of sub-paragraph (1) which has been worn by a person shall be worn by another person unless it has been thoroyghly cleaned and disinfected since last being worn and the person has been fully instructed in the proper use of that equipment. (9) There shall be provided accommodation in conveniently accessible position for all persons employed in operation to which this schedule applies for storing of personal clothing. This should be separated from the accommodation provided under sub-paragraph (2) to prevent contamination of personal clothing. 11. Washing and bathing facilities: (1) There shall be provided and maintained in a clean state and in a good repair for the use of all workers employed in the processes covered by the schedule, adequate washing and bathing places having a constant supply of water under cover at the rate of one such place for every 15 persons employed; (2) The washing
![Page 151: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/151.jpg)
151places shall have standpipes placed at intervals of not less than one metre; (3) Not less than one half of the total number of washing places shall be provided with bathrooms; (4) Sufficient supply of clean towels made of suitable material shall be provided; ―Provided that such towels shall be supplied individually for each worker if so mordered by the Inspector; and (5) Sufficient supply of soap and nail brushes shall be provided. 12. Messroom: (1) There shall be provided and maintained for the use of all workeers employed in the factory covered by this schedule, remaining on the premises during the rerst intervals, a suitable mess room which shall be furnished with:—(a) sufficient tables and benches with backrest; and (b) adequate means of warming food. (2) The messroom shall be placed under the charge of a resonsible person and shall be kept clean. 13. Prohibition of employment of young persons: No young person shall be employed in any one of the processes covered by this schedule. 14. Prohibition relating to smoking: No person shall smoke in any area where processes covered by this schedule are carried on. A notice in the language understood by majority of the workers shall be posted in the plant prohibiting smoking at such areas. 15. Cautionery notices: (1) Cautionery notices shall be displayed at the approaches and along the perimeter of every asbestos processing area to warn all persons regarding― (a) hazards to health from asbestos dust; (b) need to use appropriate protective equipment; (c) prohibition of entry to unauthorised persons; or authorised persons but without protective equipment; (2) Such notices shall be in the language understood by the majority of the workers. 16. Air monitoring: To ensure the effectiveness of the control measures, monitoring of asbestos fibre in air shall be carried out once at least in every shift and the record of the results so obtained shall be entered in a Register specially maintained for the purpose. 17. medical facilities and records of medical examination and tests: (1) The occupier of every factory or part of the factory to which the schedule applies, shall― (a) employ a qualified medical practitioner for medical surveillance of the workers covered by this schedule whose employment shall be subject to the approval of the Chief Inspector of Factories; (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a);
(2) The record of medical examination and appropriate tests carried out by the said medical practitioner shall be maintained in a specific register approved by the Chief Inspector of Factories which shall be kept readily available for inspection by the Inspector.
18. Medical examination by Certifying Surgeon: (1) Every worker employed in the processes specified in paragraph 1 shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include pulmonary function tests, tests for detecting asbestos fibres in sputum and chest X-ray. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the pereson affected shall be suitably rehabilitated.
(2) Every worker employed in the process referred to in sub-paragraph (1) shall be re-examined by a Certifying Surgeon at least once in every twelve calendar months. Such examinatioin shall, wherever the Certifying Surgeon considers appropriate, include all the tests specified in sub-paragraph (1) except chest X-ray which will be carried out once in three years.
(3) The Certifying Surgeon after examining a worker shall issue a Certificate of Fitness in Form 28. The record of examination and re-examinations carried out shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a health register in Form 29.
(4) The Certificate of Fitness and the Health Register shall be kept readily available for inspectioin by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit to work in the said processes.
(6) No person who has been unfit to work as said in sub-paragraph (5) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. 19. Exemptions: If in respect of any factory the Chief Inspector is satisfied that owing to the exceptional circumstances or infrequency of the processes or for any other reason all or any of the provisions of this schedule is not necessary for protection of the workers in the factory, the Chief Inspector may by a certificate in writing, which he may at his discretion revoke at any time, exempt such factory from all or any of such provisions subject to such conditions, if any, as he may specify therein.
![Page 152: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/152.jpg)
152 SCHEDULE XV
HANDLING OR MANIPULATION OF CORROSIVE SUBSTANCES 1. Definition: For the purpose of this schedule― (a) “corrosive operation” means an operation of manufacturing, storing, handling, processing, packing or using any corrosive substance in a factory; and
(b) “corrosive substance” includes sulphuric acid, nitric acid, hydrochloric acid, hydrofluoric acid, carbolic acid, phosphoric acid, liquid chlorine, liquid bromine, bromine, ammonia, sodium hydroxide and potassium hydroxide and a mixture thereof, and any other substance which the State Government by notification in the official gazette specify to be a corrosive substance. 2. Flooring: The floor of every work room of a factory in which corrosive operation is carried on shall be made of any impervious, corrosive and fire resistant material and shall be so constructed as to prevent collection of any corrosive substance. The surface of such flooring shall be smooth and cleaned as often as necessary and maintained in a sound condition. 3. Protective equipment: (1) the occupier shall provide for the use of all persons employed in any corosive operation suitable protective wear for hands and feet, suitable aprons, face shields, chemical safety goggles and respirators. The equipments shall be maintained in good order and shall be kept in a clean and hygienic conditioin by suitably treating to get rid of the ill effects of any absorbed chemicals and by disinfecting. The occupier shall also provide suitable protective creams and other preparations whenever necessary ; (2) The protective equipment and preparations provided shall be used by the persons employed in any corrosive operation. 4. Water facilities: Where any corrosive operation is carried on , there shall be provided as close to the place of such operation as possible, a source of clean water at a height of 210 centimetres from a pipe of 1.25 centimetres diameter and fitted with a quick acting valve so that in case of injury to the worker by any corrosive substance, the injured part can be thoroughly flooded with water. Whenever necessary, in order to ensure continuous water supply, a storage tank having a minimum length, breadth and height of 210cm.,120 cm. and 60 cm. respectively or such dimensions as are approved by the Chief Inspector shall be provided as the source of clean water. 5. Cautionary notice: A cautionary notice in the following form and printed in the language which majority of the workers employed understand, shall be displayed prominently close to the place where a corrosive operation is carried out and where it can be easily and conveniently read by the workers. If any worker is illeterate, effective steps shall be taken to explain carefully to him the contents of the notice so displayed.
CAUTIONARY NOTICE DANGER! Corrosive substances cause severe burns and vapours thereof may be extremely hazardous. In case of contact, immediately flood the part affected with plenty of water for at least 15 minutes Get Medical Attention: Quickly.
6. Transport: (1) Corrosive substances shall not be filled, moved or carried except in containers or through pipes and when they are to be transported in containers, they shall be placed in crates of sound construction and of sufficient strength; (2) A container with a capacity of 11.5 litres or more of a corrosive substance shall be placed in a receptacle or crate and then carried by more than one person at a height below the waste line unless a suitable rubber wheeled truck is used for the purpose; (3) Containers for corrosive substances shall be plainly labelled. 7. Devices for handling corrosives: (1) tilting, lifting or pumping arrangements shall be used for emptying jars, carboys and other containers of corrosives; (2) Corrosive substances shall not be handled by bare hands but by means of a suitable scoop or other device. 8. Opening of valves: Valves fitted to containers holding a corrosive substance shall be opened with great care. If they do not work freely, they shall not be forced open. They shall be opened by a worker suitably trained for the purpose. 9. Cleaning tanks, stills etc.: (1) In cleaning out or removing residues from stills or other large chambers used for holding any corrosive substance, suitable implements made of wood or other material shall be used to prevent production of arseniuretted hydrogen (arsine); (2) Whenever it is necessary for the purpose of cleaning or other maintenance work for any worker to enteer chamber, tank,vat, pit or other confined space where corrosive substance has been stored, all possible precautions required under Section 36 of the Act shall be taken to ensure the worker’s safety; (3) Whenever possible, before repairs are undertaken to any part of equipment in which a corrosive substance was handled, such equipment or part thereof shall be freed of any adhering corrosive substance by adopting suitable methods. 10. Storage: (1) Corrosive substances shall not be stored in the same room with other chemicals such as turpentine, carbides, metallic powders and combustible materials, the accidental mixing with which may cause a reaction which is either violent or gives rise to toxic fumes and gases; (2) Pumping or filling overhead tanks, receptacles, vats or other containers for storing corrosive substances shall be so arranged that there is no possibility of any corrosive substances overflowing and causing injury to any person; (3) Every container having a capacity of twenty litres or more and every pipeline, valveand fitting used for storing or carrying corrosive substances shall be thoroughly examined every year for
![Page 153: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/153.jpg)
153 finding out any defects, and defects so found out shall be removed forthwith. A register shall be maintained of every such examination made and shall be produced before the Inspector whenever required. 11. Fire extinguishers and fire fighting equipment: An adequate number of suitable type of fire extinguisheers or other fire fighting equipment, depending on the nature of chemicals stored shall be provided. Such extinguishers or other equipment shall be regularly tested and refilled. Clear instructions as to how the extinguishers or other equipment should be used, printed in the language which majority of the workers employed understand, shall be affixed near each extinguisher or other equipment. 12. Exemptioin: If in respect of any factory on an application made by the manager, the Chjief Inspector is satisfied that owing to the exceptional circumstances or the infrequency of the process or for any other reason to be recorded by him in writing,all or any of the provisions of this schedule are not necessary for the protection of the persons employed therein he may by a certificate in writing, which he may at any time revoke, exempt the factory from such of the provisions and subject to such conditions as he may specify therein. _______________________________________________________________________________________________
SCHEDULE XVI PROCESSING OF CASHEWNUT 1. Application: This schedule shall apply to all factories in which roasting, scrubbing and shelling of cashewnut or extracting oil from cashewnut or cashewnut shells are carried on. 2. Prohibition of employment of women and young persons: No woman or young person shall be employed in any of the processes specified in paragraph 1 except in shelling of roasted cashewnuts. 3. Protective clothing and equipment: The occupier shall provide and maintain for the use of all persons employed in roasting and scrubbing of cashewnuts or extracting oil from cashewnuts or cashewnut shells― (a) suitable rubber or washable leather gloves; (b) suitable type of impervious aprons with sleeves to cover body down to knees and shoulders; and (c) suitable type of footwear to afford protection to feet and legs against cashewnut oil; —and, for the workers employed in cashewnut shelling, either:― (d) a protective ointment containing 10% of shelzac, 55% of alcohol, 10% of sodium perborate, 5% of carbitol and 20% of talc; or,
(e) suficient quantity of kaolin and coconut oil; and (f) any other material or equipment which the Chief Inspector of Factories may deem to be necessary for the protection of the workers. 4. Use of protective clothing and equipment: Every person employed in processes specified in paragraph 1 shall make use of protective clothing and equipment supplied and arrangements shall be made by the occupier to supervise its use, maintenance and cleanliness. 5. Disposal of shells,ashes or oil of cashewnut: (1) Shells, ashes or oil of cashewnut shall not be stored in any room in which workers are employed and shall be removed at least twice a day to any pit or enclosed place in the case of shells and ashes and to closed containers kept in a separate room in the case of oil; (2) No worker shall be allowed to handle shells or oil of cashewnuts without using the protective clothing or equipment provided under paragraph 3 above. 6. Floors of workrooms: The floor of every workroom in which processes specified in paragraph 1 are carried on, shall be of hard material so as to be smooth and impervious and of even surface and shall be cleaned daily, and spillage of any cashewnut oil in any workroom shall be washed with soap and cleaned immediately. 7. Seating accommodation: Workers engaged in shelling of cashewnuts shall be provided with adequate seats or work benches which shall be cleaned daily. 8. Messrooms: (1) There shall be provided and maintained for the use of all persons employed in processes specified in paragraph 1, a suitable restroom furnished with sufficient tables and chairs or benches; (2) separate lockers shall be provided where food etc. shall be stored by workers before it is consumed in the restroom. 9. Food, drinks etc prohibited in work rooms: No food, drink, pan, supari or tobacco shall be brought or consumed by any worker in any room in which processes specified in paragraph 1 are carried out and no person shall remain in any such room during intervals for meal or rest. 10. Washing facilities: Where roasting, scrubbing and shelling of cashewnuts or extracting oil from cashewnuts or cashewnut shells is carried on, there shall be provided and maintained in a clean state and good repair washing facilities, with a sufficient supply of soap, coconut oil, nail brushes and towels at the scale of one tap or stand pipe for every 10 workers; and the taps or stand pipes shall be spaced not less than 1.2 metres apart. 11. Time allowed for washing: Before each meal and before the end of the day’s work, at least ten minutes, in addition to the regular meal times, shall be allowed for washing, to each person employed in processes specified in paragraph 1. 12. Smoke or gas produced by roasting cashewnuts: Where smoke or gas is produced in the operatrion of roasting, provision shall be made for removing the smoke or gas through a chimney of sufficient height and capacity or by such other arrangements as may be necessary to prevent the gas or smoke escaping into the air or any place in which workers are employed. 13. Storage of protective equipment: A suitable room or a portion of the factory suitably partitioned off shall be provided exclusively for the storage of all the protective equipment supplied to the workers and no such equipment shall be stored in any place other than the room or places so provided.
![Page 154: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/154.jpg)
154 14. Medical facilities and records of examinations and tests: (1) The occupier of every factory to which this schedule applies shall― (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The said medical practitioner shall inspect daily the hands and feet of all the persons employed in the processes specified in paragraph 1. (3) The record of such examinations carried out by the medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspectioin by the Inspector.
(4) The first-aid box maintained shall also contain Burrough’s Solution (1:20) and aqueous solution of tannic acid (10%) for treatment of cases of dermatitis.
14A. Medical examination by Certifying Surgeon: (1) Every worker employed in the processes specified in paragraph 1 shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examinations shall include skin tests for dermatitis and no worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such emplolyment by the Certifying Surgeon.
The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated.
(2) Every worker employed in the said processes shall be re-examined by the Certifying Surgeon at least once inevery three calendar months. Such examinations shall, wherever the Certifying Surgeon considers appropriate, include a skin test for dermatitis.
(3) The Certifying Surgeon after examining a worker shall issue a certificate of fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), shall also be entered by the Certifying Surgeon in a health register in Form 29.
(4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said
processes on the ground that continuance therin would involve special danger to the health of the worker, he shall make a record of his findings in the said cetificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit to work in the said processes.
(6) No person who has been unfit to work as said in sub-paragraph (5) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes.
15. Exemption: The Chief Inspector of Factories may grant exemptions from the operation of any of these provisions where he is satisfied that their observance is not necessary for safeguarding the health of the workers.
_______________________________________________________________________________________________ SCHEDULE XVII
COMPRESSION OF OXYGEN AND HYDROGEN PRODUCED BY ELECTROLYSIS OF WATER 1. Location of electrolyser plant: The room in which electrolyser plant is installed shall be separate from the plant for storing and compressing the oxygen and hydrogen and also the electric generator room. 2. Testing of purity: (1) The purity of oxygen and hydrogen shall be tested by a competent person at least once in every shift at the following posts:― (a) in the electrolysis room; (b) at the gas holder inlet; and (c) at the suction end of the compressor. (2) The purity figure shall be entered in a register and signed by the persons carrying out such tests: Provided, however, that if the electrolysis plant is fitted with automatic recrder of purity of oxygen and hydrogen with alarm lights, it shall be sufficient if the purity of gases is tested at the suction end of the compressor only. 3. Restriction as to the compression: The oxygen and hydrogen gases shall not be compresed if their purity as determined under paragraph 2 above falls below 98% at any time. 4. Limit switch for gasholder: The bell of any gas holder shall not be permitted to go within the 30 centimetres of its lowest position when empty and a limit switch shall be fitted to the gasholder in such a manner as to switch off the compressor motor when the limit is reached. 5. Provision of negative pressure switch: In addition to the limit switch in the gasholder, a sensitive negative presure switch shall be provided in or adjacent to the suction main for hydrogen close to the gasholder and between the gasholder and the hydrogen compressor to switch off the compressor motor in the event of the gasholder being emptied to the extent as to cause vacuum. 6. Purity of caustic soda: The water and caustic soda used for making lye shall be chemically pure within pharmaceutical limits. 7. Precautions against reversal of polarity: Electrical connections at the electrolyser cells and at the electric generator terminals shall be so constructed as to preclude the possibility of wrong connections leading to the reversal of polarity an in addition an automatic device shall be provided to cut off power in the event of reversal of polarity owing to wrong connections either at the switch board or at the electric generator terminals
![Page 155: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/155.jpg)
1558. Colouring of gas pipes: Oxygen and hydrogen gas pipes shall be painted with distinguishing colours and in the event of leakage at the joints of the hydrogen gas pipes, the pipe after reconnection shall be purged of all air before drawing in hydrogen gas. 9. Use of flameproof fitings: All electrical wiring and apparatus in the electrolyser room shall be of flame proof construction or enclosed in flame proof fittings and no naked light or flame shall be allowed to be taken either in the electrolyser room or where compression and filling of the gases is carried on and such warning notices shall be exhibited in prominent places. 10. Prohibition of hot work: No part of the electrolyser plant and the gasholder and compressor shall be subjected to welding, brazing,soldering or cutting until steps have been taken to remove any explosive substances from that part and render the part safe for such operations and after the completion of such operations no explosive substances shall be allowed to enter that part until the metal has cooled sufficiently to prevent risk of explosion. 11. Repair etc. to be done under supervision : No work of operation, repair or maintenance shall be undertaken except under the direct supervision of a person who, by his training, experience and knowledge of the necessary precautions against risk of explosion is competent to supervise such work. No electric generator after erection or repairs shall be switched on to the electrolysers unless the same is certified by the competent persons under whose direct supervision erection or repairs are carried on to be in a safe condition and the terminals have been checked for the polarity as required by paragraph 7. 12. Checking of plant: Every part of the electrolyser plant and the gasholders and compresor shall have a regular schedule of overhaul and checking and every defect noticed shall be rectified forthwith. _______________________________________________________________________________________________
SCHEDULE XVIII PROCESS OF EXTRACTING OILS AND FATS FROM VEGETABLES AND ANIMAL SOURCES IN SOLVENT EXTRACTION PLANTS 1. Definitions: For the purposes of this schedule―
(a) “solvent extraction plant” means a plant in which the process of extracting oils and fats from vegetable and animal sources by use of solvent is carried on;
(b) “solvent” means an inflammable liquid such as pentane, hexane and heptane used for the recovery of vegetable oils; (c) “flame proof enclosure” as applied to electrical machinery or apparatus means an enclosure that will withstand, when covers or other access doors are properly secured, an internal explosion of the flammable gas or vapour which may enter or which may originate inside the enclosure without sufering damage and without communicating internal inflammation (or explosion) to the external flammable gas or vapour; (d) “competent person’’ for the purpose of this schedule shall be at least a member of the Institue of Engineers (India) or an Associate Member of the said institution with 10 years experience in a responsible position as may be approved by the Chief Inspector; provided that a graduate in Mechanical Engineering or Chemical Technology with specialised knowledge of oils and fats and with a minimum experience of 5 years in a solvent extraction plant shall also be considered to be a competent person; provided further that the State Government may accept any other qualifications if in its opinioin they are equivalent to the qualifications aforesaid. 2. Location and layout: (1) No solvent extraction plant shall be permitted to be constructed or extended to within a distance of 30 metres from the nearest residential locality; (2) A 1.5 metre high continuous wire fencing shall be provided around the solvent extraction plant upto a minimum distance of 15 metres from the plant; (3) No persons shall be allowed to carry any matches or an open flame or fire inside the area bound by the fencing; (4) Boiler houses and other buildings where open flame processes are carried on shall be located at least 30 metres away from the solvent extraction plant; (5) If godowns and preparatory processes are at a distance of less than 30 metres from the solvent extraction plant, these shall be at least 15 metres distant from the plant; and a continuous barrier wall of non- combustible material 1.5 metres high shall be erected at a distance of not less than 15 metres from the solvent extraction plant so that it extends to at least 30 metres of vapour travel around its ends from the plant to the possible sources of ignition. 3. Electrical installation: (1) All electrical motors and wiring and other electrical equipment installed or housed in solvent extraction plant shall be of flame proof construction; (2) All metal parts of the plant and building including various tanks and containers where solvents are stored or are present and all parts of electrical equipment not required to be energised shall be properly bonded together and connected to earth so as to avoid accidental rise in the electrical potential of such parts above the earth potential. 4. Restriction on smoking: Smoking shall be strictly prohibited within 15 metres distance from solvent extraction plant. For this purpose, “Nosmoking” signs shall be permanently displayed in the area.
5. Precautions against friction: (1) All tools and equipments including ladders, chains and other lifting tackles required to be used in the solvent extraction plant shall be of non-sparking type; (2) No machnery or equipment in solvent extraction plant shall be belt driven unless the belt used is of such a type that it does not permit accumulation of static electricity to any dangerous level; (3) No person shall be allowed to enter and work in the solvent extraction plant if
![Page 156: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/156.jpg)
156 wearing clothes made of nylon or such other fibre that can generate static electrical charge, or wearing footwear which is likely to cause sparks by friction. 6. Fire fighting apparatus: Adequate number of portable fire extinguishers suitable for use against flammable liquid fire shall be provided in the solvent extraction plant; (2) An automatic water spray sprinkler system on a wet pipe or open-head deluge system with sufficient supply of storage water shall be provided over solvent extraction plant and throughout the building housing such plant. 7. Precautions against power failure: Provision shall be made for the automatic cutting off of steam in the event of power failure and also for emergency overhead water supply for feeding water by gravity to condenser which shall come into play automatically with the power failure. 8. Magnetic separators: Oil cake shall be fed to the extractor by a conveyor through a hopper and magnetic separator shall be provided to remove any pieces of iron during its transfer. 9. Venting: (1) Tanks containing solvents shall be protected with emergency venting to relieve excessive internal pressure in the event of fire; (2) All emergency relief vents shall terminate at least 6 metres above the ground and be so located that vapours will not re-enter the building in which solvent extraction plant is located. 10. Waste water: Process waste water shall be passed through a flash-evaporator to remove any solvent before it is discharged into a sump which should be located within the fenced area but not closer than 8 metres to the fence. 11. Ventilation: The solvent extraction plant shall be well ventilated and if the plant is housed in building, the building shall be provided with mechanical ventilation with provision for at least six air changes per hour. 12. House keeping: (1) Solvents shall not be stored in an area covered by solvent extraction plant except in small quantities which shall be stored in approved safety cans; (2) Waste materials such as oily rags, other wastes and absorbents used to wipe off solvent and paints and oils shall be deposited in approved containers and removed from the premises at least once a day; (3) Space within the solvent extraction plant within 15 metres from the plant shall be kept free from any combustible materials and any spills of oil or solvent, shall be cleaned up immediately. 13. Examination and rerpairs: (1) The solvent extraction plant shall be examined by the competent person to determine any weakness or corrosion and wear once in every 12 months. Report of such examination shall be supplied to the Inspector with his observation as to whether or not the plant is in safe condition to work; (2) No repairs shall be carried out to the machinery or plant except under the direct supervision of the competent person; (3) Facility shall be provided for purging the plant with inert gas or steam before opening for cleaning or repairs and before introducing solvent after repairs. 14. Operating personnel: The operation of the plant and machinery in the solvent extraction plant shall be in the charge of such duly qalified and trained persons as are certified by the competent person to be fit for the purpose and no other person shall be allowed to operate the plant and machinery. 15. Employment of women and young persons: No women or young person shall be employed in the solventextraction plant. 16. Vapour detection: A suitable type of flameproof and portable combustible gas indicator shall be provided and maintained in good working order and a schedule of routine sampling of atmosphere at various locations as approved by the Chief Inspector shall be drawn out and entered in a register maintained for the purpose. 17. Exemption: If in respect of any factory, the Chief Inspector is satisfied that owing to exceptional circumstances or infrequency of process or for any other reasons, all or any of the provisions of this schedule is not necessary for the protection of the workers in the factory, the Chief Inspector may by a certificate in writing (which he may in his discretion revoke at any time) exempt such factory from all or any of such provisions subject to conditions, if any, as he may specify therein.
SCHEDULE XIX MANUFACTURE OR MANIPULATION OF MANGANESE AND ITS COMPOUNDS 1. Application: This schedule shall apply to every factory in which or in any part of which any manganese process is carried on. 2. Definitions: For the purpose of this schedule― (a) “manganese process” means processing, manufacture or manipulation of manganese or any compound of manganese or any ore or any mixture containing manganese; (b) “first employment” means first employment in any manganese process and includes, also re-employment in any manganese process following any cessation of employment for a continuous period exceeding three calendar months; (c) “manipulation” means mixing, blending, filling, emptying, grinding, sieving, drying, packing, sweeping or otherwise handling of manganese or a compound of manganese or any ore or any mixture containing manganese; and (d) “efficient exhaust ventilation” means localised ventilation effected by mechanical means for the removal of dust or fume or mist at its source of origin so as to prevent it from escaping into the atmosphere of any place where any work is carried on. No draught shall be deemed to be efficient which fails to remove the dust or fume or mist at the point where it is generated and fails to prevent it from escaping into and spreading into the atmosphere of a work place.
![Page 157: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/157.jpg)
1573. Isolation of a process: Every manganese process which may give rise to dust, vapour or mist containing manganese shall be carried on in a totally enclosed system or otherwise effectively isolated from other processes so that other plants and processes and other parts of the factory and persons employed on other processes may not be affected by the same. 4. Ventilation process: No process in which any dust, vapour or mist containing manganese is generated, shall be carried out except under an efficient exhaust ventilation which shall be applied as near to the point of generation as practicable. 5. Personal protective equipment: (1) The occupier of the factory shall provide and maintain in good and clean condition suitable overalls and head coverings for all persons employed in any manganese process and such overalls and head coverings for all persons employed in any manganese process and such overalls and head coverings shall be worn by the persons while working on a manganese process; (2) The occupier of the factory shall provide suitable respiratory protective equipment for use by workers in emergency to prevent inhalation of dusts, fumes or mists. Sufficient number of complete sets of such equipment shall always be kept near the work place and the same shall be properly maintained and kept always in a condition to be used readily; (3) The occupier shall provide and maintain for the use of all persons employed, suitable accommodation for the storage and make adequate arrangements for cleaning and maintenance of personal protective equipment. 6. Prohibition relating to women and young persons: No women or young persons shall be employed or permitted to work in any manganese process. 7. Food, drinks etc. prohibited in the work rooms: No food, drink, pan and supari or tobacco shall be allowed to be brought into or consumed by any worker in any work room in which any manganese process is carried on. 8. Messroom: There shall be provided and maintained for the use of the persons employed in a manganese process a suitable messroom which shall be furnished with sufficient tables and benches and adequate means for warming of food. The messroom shall be placed under the charge of a responsible person and shall be kept clean. 9. Washing facilities: There shall be provided and maintained in clean state and in good condition, for the use of persons employed on manganese process― (a) a wash place under cover, with either― (i) a trough with a smooth impervious surface fitted with a waste plug without plug, and of sufficient length to allow at least 60 centimetres for every ten such persons employed at any one time; and having a constant supply of water from taps or jets above the trough at intervals of not more than 60cm. ;or (ii) at least one wash basin for every five such persons employed at any one time, fitted with a waste pipe and plug and having a constant supply of water; and (b) sufficient supply of soap or other suitable cleaning material and nail brushes and clean towels. 10. Cloakroom: If the Chief Inspector so requires, there shall be provided and maintained for the use of persons employed in a manganese process a cloakroom for clothing put off during working hours with adequate arrangements for drying the clothing. 11. Cautionary placard and instructions: Cautionary notices in the form specified in appendix and printed in the language of the majority of the workers employed shall be afixed in prominent places in the factory where they can be easily and conveniently read by the workers and arrangement shall be made by the occupier to instruct periodically all workers employed in a manganese process regarding the health hazards connected with their duties and the best preventinve measures and methods to protect themselves. The notices shall always be maintained in a legible condition. 12. Medical facilities and records of examination and tests: (1) The occupier of every factory to which the schedule applies, shall― (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate Register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 12A. Medical examination by Certifying Surgeon: (1) Every person employed in any manganese process shall be medically examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include test for detection of serum calcium, serum phosphate and manganese in blood and urine and also include steadiness tests and other neuro-muscular co-ordination tests. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated. (2) Every person employed in a manganese process shall be re-examined by a Certifying Surgeon at least once in every three calendar months and such examination shall, wherever the Certifying Surgeon considers appropriate, include all the tests in sub-paragraph (1). (3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of these tests, shall also be entered by the Certifying Surgeon in a health register in Form 29.
![Page 158: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/158.jpg)
158 (4) The certificate of fitnes and the health register in Form 29 shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that the worker is no longer fit for employment in the said process on the ground that cotinuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit to work in the said process. (6) No person who has been found unfit to work as said in sub-paragraph (5) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. 13. Exemption: If in respect of any factory, the chief Inspector is satisfied that owing to any exceptional circumstances, or infrequency of the process, or for any other reason, application of all or any of the provisions of this schedule is not necessary for the protection of the persons employed in such factory he may, by an order in writing which he may at his discretion revoke, exempt such factory from all or any of the provisions on such conditions and for such period as he may specify in the said order.
APPENDIX CAUTIONARY NOTICE Manganese and manganese compounds 1. Dusts, fumes and mists of manganese and its compounds are toxic when inhaled or when ingested. 2. Do not consume food or drink near the work place. 3. Take a good wash before taking meals. 4. Keep the working area clean. 5. Use the protective clothing and equipment provided. 6. When required to work in situations where dusts, fumes or mists are likely to be inhaled, use respiratory
protective equipment provided for the purpose. 7. If you get severe head aches, prolonged sleeplessness or abnormal sensatiions on the body, report to the
Manager who would make arrangements for your examination and treatment. _______________________________________________________________________________________________
SCHEDULE XX MANUFACTURE OR MANIPULATION OF DANGEROUS PESTICIDES 1. Application: This schedule shall apply in respect of all factories or any part thereof in which the process of manufacture or manipulation of dangerous pesticides hereinafter referred to as the said manufacturing process, is carried on. 2. Definitions: For the purpose of this schedule― (a) “dangerous pesticides” means any product proposed or used for controlling, destroying or repelling any pest or for preventing growth or mitigating effects of such growth including any of its formulations which is considered toxic under and is covered by The Insecticides Act,1968 and the rules made thereunder and any other product, as may be notified from time to time by the State Government; (b) “manipulation” includes mixing, blending, formulating ,filling, emptying, packing or otherwise handling; (c) “efficient exhaust draught”means localised mechanical ventilation for removal of smoke, gas,vapour, dust,fume or mist so as to prevent them from escaping into the air of any workroom in which work is carried on. No exhaust draught shall be considered efficient if it fails to remove smoke generated at the point where such gas, fume, dust, vapour or mist originates from the process; (d) “first employment” shall mean first employment in any manufacturing process to which this schedule applies and shall also include re-employment in the said manufacturing process following any cessation of employment for a continuous period exceeding three calendar months. 3. Instruction to workers: Every worker on his first employment shall be fully instructed on the properties including dangerous properties of the chemicals handled in the said manufacturing process and the hazards involved. The employees shall also be instructed on the measures to be taken to deal with any emergency. Such instructions shall be repeated periodically. 4. Cautionery notices and placards: Cautionary notices and placards in the form specified in the appendix to this schedule and printed in the language of the majority of the workers shall be displayed in all work places in which the said manufacturing process is carried on so that they can be easily and conveniently read by the workers. Arrangements shall be made by the occupier and the manager of the factory to periodically instruct the workers regarding the health hazards arising in the said manufacturing process and methods of protection. Such notices shall include brief instructions regarding the periodical clinical tests required to be undertaken for protecting the health of the workers. 5. Prohibition relating to employment of women or young persons: No woman or young person shall be employed or permitted to work in any room in which the said manufacturing process is carried on or in any room in which dangerous pesticide is stored.
![Page 159: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/159.jpg)
1596. Food, drinks and smoking prohibited: (1) No food, drink, tobacco, pan or supari shall be brought into or consumed by any worker in any workroom in which the said manufacturing process is carried out; (2) Smoking shall be prohibited in any workroom in which the said manufacturing process is carried out. 7. Protective clothing and protective equipment: (1) Protective clothing consisting of long pants and shirts or overalls with long sleeves and head coverings shall be provided for all workers employed in the said manufacturing process; (2) (a) Protective equipment consisting of rubber gloves, gum boots, rubber aprons, chemical safety goggles and respirators shall be provided for all workers employed in the said manufacturing process; (b) Gloves, boots, aprons shall be made from synthetic rubber where a pesticide contains oil. (3) Protective clothing and equipment shall be worn by the workers supplied with such clothing and equipment. (4) Protective clothing and equipment shall be washed daily from inside and outside if the workers handle pesticidescontaining nicotine or phosphorus and shall be washed frequently if handling other pesticides. (5) Protective clothing and equipment shall be maintained in good repair 8. Floors and work benches: (1) Floors in every work room where dangerous pesticides are manipulated shall be of cement or other impervious material giving a smooth surface; (2) Floors shall be maintained in good repair, provided with adequate slope leading to a drain and thoroughly washed once a day with hose pipe; (3) Work benches where dangerous pesticides are manipulated shall be made of smooth, non-absorbing material preferably stainless steel and shall be cleaned at least once daily. 9. Spillage and waste: (1) If a dangerous pesticide during its manipulation splashes or spills on the work-bench, floor or on the protective clothing worn by a worker, immediate action shall be taken for thorough decontamination of such areas or articles; (2) Clothes, rags, paper or other material soaked or soiled with a dangerous pesticide shall be deposited in a suitable receptacle with tight fitting cover.Contaminated waste shall be destroyeed by burning at least once a week; (3) Suitable deactivating agents, where available, shall be kept in a readily accessible place for use while attending to a spillage; (4) Easy means of access shall be provided to all parts of the plant for cleaning, maintenance and repairs. 10. Empty containers used for dangerous pesticides: Containers used for dangerous pesticides shall be thoroughly cleaned of their contents and treated with an inactivating agent before being discarded or destroyed. 11. Manual handling: (1) A dangerous pesticide shall not be required or allowed to be manipulated by hand except by means of a long handled scoop; (2) Direct contact of any part of the body with a dangerous pesticide during its manipulation shall be avoided. 12. Ventilation: (1) In every work room or areas where a dangerous pesticide is manipulated, adequate ventilation shall be provided at all times by the circulation of fresh air;
(2) Unless the process is completely enclosed, the following operations during manipulation of dangerous pesticide shall not be undertaken without an efficient exhaust draught:―(a) emptying a container holding a dangerous pesticide; (b) blending a dangerous pesticide; (c) preparing a liquid or powder formulation containing a dangerous pesticide ; and (c) changing or filling a dangerous pesticide into a container, tank, hopper or machine or small sized containers. (3) In the event of a failure of the exhaust draught provided on the above operation, the said operations shall be stopped forthwith. 13. Time allowed for washing: (1) Before each meal and before the end of the day’s work at least ten minutes in addition to the regular rest interval shall be allowed for washing to each worker engaged in the manipulation of dangerous pesticide; (2) Every worker engaged in the manipulation of dangerous pesticides shall have a thorough wash before consuming any food and also at the end of the day’s work.
14. Washing and bathing facilities: (1) There shall be provided and maintained in a clean state and in good repair for the use of all workers employed in the factory where the said manufacturing process is carried on , adequate washing and bathing places having a constant supply of water under cover at the rate of one such place for every five persons employed. (2) The washing places shall have stand pipes placed at intervals of not less than one metre; (3) Not less than one half of the total number of washing places shall be provided with bathrooms; (4) Sufficient supply of clean towels made of suitable material shall be provided; —provided that such towels shall be supplied individually for each worker if so ordered by the Inspector; (5) Sufficient supply of soap and nail brushes shall be provided. 15. Cloakroom: There shall be provided and maintained for the use of all workers employed in the factory where the said manufacturing process is carried on― (a) a cloakroom for clothing put off during working hours with adequate arrangements for drying clothing, if wet; and (b) separate and suitable arrangements for the storage of protective clothing provided under paragraph 7. 16. Messroom: (1) There shall be provided and maintained for the use of all workers employed in which the said manufacturing process is carried on and remaining on the premises during the rest intervals, a suitable messroom which shall be furnished with― (a) sufficient tables and benches with back rest; and (b) adequate means of food; (2) The messroom shall be placed under the charge of a resposible person and shall be kept clean. 17. Manipulation not to be undertaken: Manufacture or manipulation of a pesticide shall not be undertaken in any factory unless a certificate regarding its dangerous nature or otheerwise is obtained from the Chief Inspector.
![Page 160: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/160.jpg)
16018. Medical facilities and records of examinations and tests: (1) The occupier of every factory to which the schedule applies, shall― (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) Provide to the said medical practitioner all the necessarry facilities for the purpose referred to in clause (a); (2) The record of medical examinations and appropriate tests carried out by the said medicaql practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 19. Medical examination by Certifying Surgeon : (1) Every worker employed in the processes mentioned in paragraph 1 shall be examined by the Certifying Surgeon within 15 days of his first employment. Such examination in respect of Halogenated Pesticides shall include tests for determination of the chemical in blood and in fat tissues, EEG-abnormalities and memory tests. In respect of organo phosphorus compounds, such examination shall include test for depression of cholinesterase in plasma and red blood cells. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated;
(2) Every worker employed in the said processes shall be examined by a Certifying Surgeon at least once in every six calendar months. Such examination shall, wherever the Certifying Surgeon considers appropriate, include the test specified in sub-paragraph (1). Further, every worker employed in the said processes shall also be examined once in every three months by the Factory Medical Officer.
(3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2) including the nature and the results of these tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the workers, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit to work in the said processes. (6) No person who has been found unfit to work as said in sub-paragraph (5) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after furhter examination, again certifies him fit for employment in those processes. 20. Exemption: If in respect of any factory the Chief Inspector is satisfied that owing to the exceptional circumstances or the infrequency of the said manufacturing process or any other reason which he shall record in writing all or any of the provisions of this schedule are not necessary for the protection of the workers employed in the factory, he may by a certificate in writing exempt such factory, from all or any of the provisions on such condition as he may specify therein. Such certificate may at any time be revoked by the Chief Inspector after recording his reasons therefor.
CAUTIONARY NOTICE Insecticides and pesticides 1. Chemical handled in this plant are poisonous subtances 2. Smoking, eating food or drinkimg, chewing tobcco in this area is prohibited. No food stuff or drink shall be
brought in this area. 3. Some of these chemicals may be absorbed through skin and may cause poisoning. 4. A good wash shall be taken before meals. 5. A good bath shall be taken at the end of the shift. 6. Protctive clothing and equipment supplied shall be used while working in this area. 7. Containers of pesticides shall not be used for keeping food stuffs. 8. Spillage ofthe chemicals on any part of the body or on the floor or work-bench shall be immediately washed
away with water. 9. Clothing contaminated due to splashing shall be removed immediately. 10. Scrupulous cleanliness shall be maintained in this area. 11. Do not handle pesticides with barehand; use scoops provided with handles. 12.. In case of sickness like nausea, vomiting, giddiness, the Manager should be informed who will make
necessary arrangements for treatment. 13. All workers shall report for the prescribed medical tests regularly to protect their own health.
![Page 161: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/161.jpg)
161SCHEDULE XXI
MANUFACTURE,HANDLING, AND USAGE OF BENZENE AND SUBSTANCES CONTAINING BENZENE 1. Application: This schedule shall apply in respect of factories or parts thereof in which benzene or substances
containing benzeze are manufactured, handled or used. 2. Definitions: For the purposes of this schedule― (a) “substances containing benzene” means substances
wherein benzene content exceeds one percent by volume; (b) “substitute” means a chemical which is harmless or less harmful than benzene and can be used in place of benzene; (c) “enclosed system” means a system which will not allow escape of benzene vapours to the working atmosphere; and (d) “efficient exhaust draught” means localised ventilation effected by mechanical means for removal of gases, vapours and dusts or fumes so as to prevent them from escaping into the air of any workroom. No draught shall be deemed to be efficient if it fails to remove smoke generated at the point where such gases, vapours, fumes or dust originate.
3. Prohibition and substitution: (1) The use of benzene and substances containing benzene is prohibited in the following processes― (a) manufacture of varnishes, paints and thinners; and (b) cleaning and degreasing operations.
(2) Benzene or substances containing benzene shall not be used as a solvent or diluent unless the process in which it is used is carried on in an enclosed system or unless the process is carried on in a manner which is considered equally safe as if it were carried out in an enclosed system;
(3) Where suitable substitutes are available, they shall be used instead of benzene or substance containing benzene. This provision, however, shall not apply to the following processes― (a) Production of benzene; (b) Process where benzene is used for chemical synthesis; and (c) Motor spirits (used as fuel).
(4) The Chief Inspector may, subject to confirmation by the State Government, permit exemption from the percentage laid down in sub-paragraph 2 (a) and also from the provisions of sub-paragraph (2) of this paragraph temporarily under conditions and within limits of time to be determined after consultations with the emoployers and workers concerned.
4. Protection against inhalation: (1) The process involving the use of benzene or substances containing benzene shall as far as practicable be carried out in an enclosed system.
(2) Where, however, it is not practicable to carryout the process in an enclosed system, the workroom in which benzene or substances containing benzene are used shall be equipped with an efficient exhaust draught or other means for the removal of benzene vapours to prevent their escape into the air of the workroom so that the concentration of benzene in the air does not exceed 25 parts per million by volume or 80 milligrams per cubic metre.
(3) Air analysis for the measurement of concentration of benzene vapours in air shall be carried out every 8 hours or at such intervals as may be directed by the Chief Inspector at places where process involving use of benzene is carried on and the result of such analysis shall be rrecorded in a register specially maintained for the purpose. If the concentration of benzene vapours in air as measured by air analysis, exceeds 25 parts per million by volume or 80 milligrams per cubic metre, the Manager shall forthwith report the concentration to the Chief Inspector stating the reason for such increase.
(4) Workers who for special reasons are likely to be exposed to concentration of benzene in the air of the workroom exceeding the maximum referred to in sub-paragrah (2) shall be provided with suitable respirators or face masks. The duration of such exposure shall be limited as far as possible. 5. Measures against skin contact: (1) Workers who are likely to come in contact with liquid benzene or liquid substances containing benzene shall be provided with suitable gloves, approns, boots and where necessary vapour tight chemical goggles, made of material not affected by benzene or its vapours; (2) The protective wear referred to in sub-paragraph (1) shall be maintained in good condition and inspected regularly. 6. Prohibition relating to employment of women and young persons : No women or young person shall be employed or permitted to work in any workroom involving exposure to benzene or substances containing benzene. 7. Labelling: Every container holding benzene or substances containing benzene shall have the word ‘Benzene’ and approved danger symbols clearly visible on it and shall also display information on benzene content,warning about toxicity and warning about inflammability of the chemical. 8. Improper use of benzene: (1) The use of benzene or substances containing benzene by workers for cleaning their hands or their work-clothing shall be prohibited; (2) Workers shall be instructed on the possible dangers arising from such misuse. 9. Prohibition of consuming food etc. in workrooms: No worker shall be allowed to store or consume food or drink in the workroom in which benzene or substances containing benzene are manufactured, handled or used. Smoking and chewing tobacco or pan shall be prohibited in such workrooms. 10. Instructions as regards risks: Every worker on his first employment shall be fully instructed on the properties of benzene or substances containing benzene which he has to handle and of the dangers involved. Workers shall also be instructed on the measures to be taken to deal with an emergency. 11. Cautionary notices: Cautionary notices in the form specified in appendix and printed in the language easily read and understood by the majority of the workers shall be displayed in prominent places in the workrooms where benzene or substances containing benzene are manufactured, handled or used.
![Page 162: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/162.jpg)
16212. Washing facilities, cloakroom and messroom: In factories in which benzene or substances containing benzene are manufactured, handled or used, the occupier shall provide and maintain in a clean state and in good repair―
(a) washing facilities under cover, of the standard of at least one tap for every 10 persons having constant supply of water with soap and a clean towel provided individually to each worker if so ordered by the Inspector; (b) a cloakroom with locker for each worker, having two compartments―one for streeet clothing and one for work-clothing; and (c) a messroom furnished with tables and benches with means for warming food, provided that where a canteen or other proper arrangements exist for the workers to take their meals, the requirement of messroom shall be dispensed with. 13. Medical facilities and records of examinations and tests: (1) The occupierof every factory to which the schedule applies shall― (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The redcord of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector Of Factories, which shall be kept readily available for inspection by the Inspector. 14. Medical examination by the Certifying Surgeon: (1) Every worker employed in processes mentioned in paragraph 1, shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include test for detection of phenol in urine and determination of urinary sulphide ratio and C.N.S. and haemotological tests. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. The person suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated. (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in evey twelve calendar months and such examination shall, wherever the Certifying Surgeon considers appropriate, include all tests specified in sub-aragraph (1). Further, every worker shall also be examined once in every three calendar months by the factory medical officer. (3) The Certifying Surgeon after examining a worker shall issue a certificate of fitness in Form 28. The records of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of these tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findingds in those documents should also include the period for which he considers that the said person is unfit to work in the said processes. (6) No person who has been found unfit to work as said in sub-paragraph (5) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes.
APPENDIX CAUTIONARY NOTICE Benzene and substances containing benzene 1. Hazards: (a) Benzene and substancescontaining benzene are harmful. (b) Prolonged or repeated breathing of benzene vapour may result in acute or chronic poisoning. (c) Benzene can also be absorbed through skin which may cause skin and other disease. 2. Preventive measures: (a) Avoid breathing of benzene vapours. (b) Avoid prolonged or repeated contact of benzene with the skin. (c) Removed benzene soaked or wet clothing promptly. (d) If any time you are exposed to high concentration of benzene vapours and symptoms such as dizziness,
difficulty in breathing, excessive excitation and losing of consciousness, immediately inform your factory manager.
(e) Keep all the containeres of benzene closed. (f) Handle, use and process benzene and substances containing benzene carefully in order to prevent their
spillage on floor. (g) maintain good house keeping. 3. Protective equipment:
(a) Use respiratory protective equipment in places where benzene vapours are present in high concentration. (b) In emergency, use self generating oxygen mask or oxygen or air cylinder masks. (c) Wear hand gloves, aprons, goggles and gumboots to avoid contact of benzene with your skin and body parts.
![Page 163: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/163.jpg)
163 4. First-aid measures in case of acute benzene poisoning: (a) Remove the clothing immediately if it is wetted with benzene.
(b) If liquid benzene enters eye, flash thoroughly for at least 15 minutes with clean running water and immediately secure medical attention.
(c) In case of unusual exposure to benzene vapour, call a physician immediately. Until he arrives, do the following:―
(i) If the exposed person is conscious― (a) Move him to fresh air in open; (b) Lay down without a pillow and keep him quiet and warm;
(ii) If the exposed person is unconscious― (a) Lay him down preferably on the left side with the head low; (b) Remove any false teeth, chewing gum, t obacco or other foreign objects which may be in his mouth; (c)
Provide him artificial respiration in case difficulty is being experienced in breathing; (d) Incase of shallow breathing or cyanosis (blueness of skin, lips, ears, finger-nail beds) , he should be provided with medical oxygen or oxygen carbon dioxide mixture. If needed, he should be given artificial respiration. Oxygen should be administered by a trained person only. _________________________________________________________________________________________
SCHEDULE XXII MANUFACTURING PROCESS OR OPERATIONS IN CARBON DISULPHIDE PLANTS
1. Application: This schedule shall aply to all electric furnaces in which carbon disulphide is generated and all other
plants where carbon disulphide after generation, is condensed, refined and stored. This schedule is in addition to and not in derogation of any of the provisions of the Act and Rules made thereunder.
2. Construction, installation and operation: (1) The buildings in which electric furnaces are installed and carbon disulphide after generation is condensed and refined shall be segregated from other parts of the factory and shall be of open type to ensure optimum ventilation and the plant layout shall be such that only a minimum number o f workers are exposed to the risk of any fire or explosion at any time.
(2) Every electric furnaces and every plant in which carbon disulphide is condensed, refined and stored with all their fittings and attachments shall be of good construction, sound material and of adequate strength to sustain the internal pressure to which the furnace or the plant may be subjected to and shall be so designed that carbon disulphide and gas are in closed system during their normal working.
(3) The electric furnace supports shall be firmly grouted about 60 centimetres in concrete or by other effective means. 1(4) Every electric furnace shall be installed and operated according to manufacturers’ instructions and these
instructions shall be clearly imparted to the personnel-in-charge of construction and operation. (5) The instructions regarding observance of correct furnace temperature, sulphur dose, admissible current or power
consumption and periodcal checking of charcoal level shall be strictly complied with. 3. Electrodes: (1) Where upper ring electrodes made of steel are used in the electric furnace, they shall be of seamless tube construction and shall have arrangement for being connected to cooling water system through a siphon built in the electrodes or through a positive pressure water pump; (2) The arrangement for cooling water referred to in sub-paragraph (1) shall be connected with automatic alarm system which will actuate in the event of interruption of cooling water in the electrodes and give visible and audible alarm signals in the control room and simultaneously stop power supply for the furnace operation and to stop the further supply of water. The alarm system and the actuating device shall be checked every day. 4. Maintenance of charcoal level: When any electric furnace is in operation, it shall be ensured that the electrodes are kept covered with charcoal bed. 5. Charcoal separator: A cyclone type of charcoal separator shall be fitted on the offtake pipe between the electric furnace and sulphur separator to prevent entry of pieces of charcoal into the condensers and piping. 6. Rupture disk and safety seal: (1) At least two rupture disks of adequate size which shall blow off a pressure twice the maximum operating pressure shall be provided on each furnace and shall either be mounted directly on the top of the furnace or each through an independent pipe as close as posssible to the furnace; (2) A safety water seal shall be provided and tapped from a pont between the charcoal separator and the sulphur separator. 7. Pyrometer and manometers: (1) Each electric furnace shall be fitted with adequate number of pyrometers to give an indication of the temperature as correctly as reasonably practicable at various points at the furnace. The dials for reading temperatures shall be located in the Control Room.
(2) Manometers or any other suitable devices shall be provided for indicating pressure― (a) in the offtake pipe before and after the sulphur separator ; and (b) in primary and secondary condensers. 8 Check valves: All piping carrying carbon disulphide shall be fitted with check valves at suitable positions so as to prevent gas from flowing back into any electric furnace in the event of its shut down. 9. Inspection and maintenance of electric furnaces: (1) Every electric furnaces shall be inspected internally by a
competent person― (a) before being placed in serviceafter installation; (b) before being placed in service after
![Page 164: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/164.jpg)
164reconstruction; and (c) periodically every time the furnace is opened for cleaning or de-ashing or for replacing electrodes. (2) When an electric furnace is shut down for cleaning or de-ashing― (a) the brick lining shall be checked for continuity and any part found defective shall be removed; (b) after removal of any part of the lining referred to in (a) the condition of the shell shall be closely inspected; and (c) any plates forming shell found corroded to the extent that the safety of the furnace is endangered, shall be replaced.
10. Maintenance of records: The following hourly records shall be maintained in a log book ― (a) manometer reading at the points specified in sub-paragraph 7(2); (b) gas temperature indicated by pyrometers and all other vital points near the sulphur separator and primary and secondary condensers; (c) water temperature and flow of water through the siphon in the electrodes; and (d) primary and secondary voltages and current and energy consumed.
11. Electrical apparatus, wiring and fittings: All buildings in which carbon disulphide is refined or stored shall be provided with electrical apparatus , wirings and fittings which shall afford adequate protection from fireand explosion.
12. Prohibition relating to smoking: No person shall smoke or carry matches, fire or naked light or other means of producing a naked light or spark in buildings in which carbon disulphide is refined or stored, and a notice in the language understood by the majority of the workers shall be posted in the plant prohibiting smoking and carrying of matches, fire or naked light or other means of producing naked light or spark into such rooms.
13. Means of escape: Adequate means of escape shall be povided and maintained to enable persons to move to a safe place as quickly as possible in case of an emergency. At least two independent staircases of adequate width shall be provided in every building housing the furnaces at reasonable intervals at opposite ends. These shall always be kept clear of all obstructions and so designed as to afford easy passage.
14. Warning in case of fire: There shall be adequate arrangements for giving warnings in case of fire or explosion which shall operate on electricity and in case of failure of electricity, by some mechanical means.
15. Fire-fighting equipment: (1) Adequate number of suitable fire extinguishers or other fire fighting equipment shall be kept in constant readiness for dealing with risks involved and depending on the amount and nature of materials stored; (2) Clear instructions as to how the extinguishers or other equipment should be used, printed in the language which the majority of the workers employed understand, shall be affixed to each extinguisher or other equipment and the personnel trained in their use.
16. Bulk sulphur: (1) open or semi enclosed spaces for storage of bulk sulphur shall be sited with due regard to the dangers which may arise from sparks given off by nearby locomotives etc., and precautions shall be taken to see that flames, smoking and matches and other sources of ignition do not come in contact with the clouds of dust arising during handling of bulk sulphur; (2) All enclosures for bulk sulphur shall be of non-combustible construction, adequately ventilated and so designed as to provide a minimum of ledges on which dust may lodge; (3) The bulk sulphur in the enclosures shall be handled in such a manner as to minimise the formation of dust clouds and no flame, smoking and matches or other sources of ignition shall be employed during handling and non-sparking tools shall be used whenever sulphur is shovelled or otherwise removed by hand; (4) No repairs involving flames, heat or use of hand or power tools shall be made in the enclosure where bulk sulphur is stored.
17. Liquid sulphur: Open flames, electric sparks and other sources of ignition, including smoking and matches, shall be excluded from the vicinity of molten sulphur. 18. Training and supervision: (1) All electric furnaces and all plants in which carbon disulphide is condensed, refined or stored shall be under adequate supervision at all time while the furnaces and plant are in operation; (2) Workers in charge of operation and maintenance of electric furnaces and the plants shall be properly qualified and adequately trained. 19. Washing facilities: (1) The occupier shall provide and maintain in a clean state and in good repair, for the use of all persons employed wash place under cover with at least one tap or stand pipe, having a constant supply of clean
water for every five such persons, the taps or stand pipes being spaced not less than 120 centimetres apart with a sufficient supply of soap and clean towels, provided that the towels shall be supplied individually to each worker if so ordered by the Inspector; (2) All the workers employed in the sulphur storage, handling and melting operations shall be provided with a nail brush.
20. Personal protective equiupment: (1) Suitable goggles and protective clothing consisting of overalls without pockets, gloves and footwear shall be provided for the use of operatives ― (a) when operating valves or cocks controlling fluids etc.; (b) drawing off of molten sulphur from sulphur pot;and (c) handling of charcoal or sulphur.
(2) Suitable respiratory protective equipment shall be provided and stored in the appropriate place for use during abnormal conditions or in an emergency; (3) Arangements shall be made for proper and efficient cleaning of all such protective equiupment.
21. Cloakrooms: There shall be provided and maintained for the use of all persons employed in the processes a suitable cloakroom for clothing put off during work hours and a suitable place separate from the cloakroom for the storage of overalls or working clothes. The accommodation so provided shall be placed in the charge of a responsible person and shall be kept clean.
22. Unauthorised persons: Only maintenance and repair personnel, persons directly connected with the plant operation and those acompanied by authrised persons shall be admitted into the plant.
![Page 165: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/165.jpg)
165 SCHEDULE XXIII
MANUFACTURE OR MANIPULATION OF CARCINOGENIC DYE INTERMEDIATES 1. Applications: The schedule shall apply in respect of all factories or any part thereof where processes in which the substances mentioned in paragraphs 3 and 4 are formed, manufactured, handled or used and the processes incidental thereto in the course of which these substances are formed, are carried on. The process indicated in this paragraph shall be referred to hereinafter as ‘the said processes’, and such a reference shall mean any or all the processes described in this paragraph. 2. Definition: For the purpose of this schedule the following definitions shall apply, unless the context otherwise requires― (a) “controlled substances” means chemical substances mentioned in paragraph 4 of this schedule; (b) “first employment” means first employment in the said processes and also re-employment in such processes following any cessatiomof employment for a continuous period exceeding three calendar months; (c) “efficient exhaust draught” means localised ventilation effected by mechanical means for the removal of gas, vapour, dust or fume so as to prevent them from escaping into the air of any place in which work is carried on. No draught shall be deemed to be efficient which fails to remove smoke generated at the point where such gas, vapour, fume or dust originates; and (d) “prohibited substances” means chemical substances mentioned in paragraph 3 of this schedule. 3. Prohibited substances: For the purpose of this schedule, the folowing chemical substances shall be clasified as ‘prohibited substances’ except when these substances are present or are formed as a by-product of a chemical reaction in a total concentration not exceeding one percent :― (a) beta naphthylamine and its salts; (b) benzidine and its salts; (c) 4-amino diphenyl and its salts; (d) 4-nitro diphenyl and its salts; and (e) any substance containing any of these compounds. 4. Controlled substances: For the purpose of this schedule , the following chemical substances shall be classified as “controlled substances”:― (a) alpha-naphthylamine or alpha-naphthylamine containing not more than 1.00% of beta-naphthylamine either as by-product of chemical reaction or otherwise, and its salts; (b) ortho-tolidine and its salts; (c) dianisidine and its salt; (d) dichlorobenzidine and its salts; (e) auramine; and (f) magneta. 5. Prohibition of employment: No person shall be employed in the said processes in any factory in which any prohibited substance is formed, manufactured, processed, handled or used except as exempted by the Chief Inspector as stipulated in paragraph 23. 6. Requirements for processing or handling controlled substances: (1) Wherever any of the controlled substances referred to in paragraph 4 are formed, manufactured, processed, handled or used, all practical steps shall be taken to prevent inhalation, ingestion or absorption of the said controlled substance by the workers while engaged in processing that substance; and its storage or transport within the plant ;or in cleaning or maintenance of the concerned equipment, plant, machinery and storage areas; (2) As far as possible all operations shall be carried out in a totally enclosed system. Wherever such enclosure is not possible, efficient exhaust draught shall be applied at the point where the controlled substances are likely to escape into the atmosphere during the process; (3) The conrolled substances shall be received in the factory in tightly closed containers and shall be kept so except when these substances are in process or in use. The controlled substances shall leave the factory only in tightly closed containers of appropriate type. All the containers shall be plainly labelled to indicate the contents. 7. Personal protective equipment: (1) The following items of personal protective equipment shall be provided and issued to every worker employed in the said processes:― (a) long trousers and shirts or overalls with full sleeve and head coverings. The shirt or overalls shall cover the neck completely; and (b) rubber gum-boots. (2) The following items of personal protective equipment shall be provided in sufficient numbers for use by workers employed in the said processes when there is danger of injury during performance of normal duties or in the event of emergency:―(a) rubber hand gloves; (b) rubber approns; and (c) airline respirators or other suitable respiratory protective equipment.
(3) It shall be the responsibility of the manager to maintain all items of personal protective equipment in a clean and hygienic condition and in good repair.
8. Prohibition relating to employment of women and young persons: No woman or young person shall be employed or permitted to work in any room in which the said processes are carried on. 9. Floors of work room: The floor of every workroom in which the said processes are carried on shall be (a) smooth and impervious to water provided that asphalt or tar shall not be used in the composition of the floor; (b) maintained in a state of good repair; (c) with a suitable slope for easy draining and provided with gutters and (d) thoroughly washed daily with the drain water being left into a sewer through a closed channel. 10. Disposal of empty containers: Empty containers used for holding controlled substances shall be thoroughly cleaned of their contents and treated with an inactivating agent before being discarded. 11. Manual handling: Controlled substances shall not be allowed to be mixed, emptied or handled except by means of a scoop with a handle. Such scoop shall be thoroughly cleaned daily. 12. Instructions rergarding risk: Every worker on his first employment in the said processes shall be fully instructed on the properties of the toxic chemicals to which he is likely to be exposed to, of the dangers involved and the precautions to be taken. Workers shall be instructed on the measures to be taken to deal with an emergency. 13. Cautionary placards: cautionary placards in the Form specified in appendix attached to this schedule and printed in the language of the majority of the workers employed in the said processes shall be affixed in prominent places frequented
![Page 166: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/166.jpg)
166by them in the factory, where the placards can be easily and conveniently read. Arrangements shall be made by the manager to instruct periodically all such workers regarding the precautions contained in the cautionary placards. 14. Obligation of the workers: It shall be the duty of the persons employed in the said processes to submit themselves for the medical examination including exfoliative cytology of urine by the Certifying Surgeon or the qualified medical practitioner as provided for under these rules. 15. Washing and bathing facilities: (1) The following washing and bathing facilities shall be provided and maintained in a clean state and in good rtepair for the use of all workers employed in the said processes:― (a) a wash place under cover having constant suply of water and provided with clean towels, soap and nail brushes and with at least one stand pipe for every five such workers; (b) 50% of the stand pipes provided under clause (a) shall be locate in bathrooms where both hot and cold water shall be made available during the working hours of the factory and for one hour thereafter; (c) the washing and bathing facilities shall be in close proximity of the area housing the said processes; (d) clean towels shall be provided individually to each worker; and (e) in addition to taps mentioned under clause (a), one stand pipe in which warm water is made available, shall be provided on each floor. (2) Arrangement shall be made to wash factory uniforms and other work clothes every day. 16. Food,drinks etc. prohibited in workroom: No worker shall consume food, drink, pan, supari or tobacco or shall smoke in any workroom in which the said processes are carried on and no worker shall remain in any such workroom during intervals for meals or rest. 17. Cloakroom: There shall be provided and maintained in a clean state and in good repair for the use of the workers employed in the said processes (a) a cloakroom with lockers having two compartments―one for street clothes and the other for work clothes, and (b) a place separate from the locker room and the messroom, for the storage of protective equipment provided under paragraph 7. The accommodation so provided shall be under the care of a responsible person and shall be kept clean. 18. Messroom: There shall be provided and maintained for the use of workers employed in the said processes who remain on the premises during the meal intervals, a messroom which shall be furnished with tables and benches and provided with suitable means for warming food. 19. Time allowed for washing: Before the end of each shift 30 minutes shall be allowed for bathing for each worker who is employed in the said processes. Further, at least 10 minutes shall be allowed for washing before each meal in addition to the regular time allowed for meals. 20. Restriction on age of persons employed: No worker under the age of 40 years shall be engaged in the factory in the said process for the first time after the date on which the schedule comes into force. 21. Medical facilities and records of examinations and tests: (1) The occupier of every factory to which the schedule applies, shall― (a) employ a qualified medical practitioner for medical surveillance of the workers emplolyed therein whose employment shall be subject to the approval of the Chief Inspector of Factories, and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 22. Medical examination by Certifying Surgeon: (1) Every worker employed in the said processes shall be examined by a certifying Surgeon within 15 days of his first employment. Such examination shall include tests for detection of methemoglobin in blood (Haematological tests), paranitrophenol in urine, pulmonary function tests and C.N.S. tests. No worker shall be allwed to work after 15 days of his first employment in the factory unless certified fit for such employmentby the Certifying Surgeon. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated.
(2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every six calendar months and such re-examination shall, wherever the Certifying Surgeon considers appropriate, include all the tests specified in sub-paragraph (1).
(3) The Certfying Surgeon after examining a worker shall issue a certificate of fitness in Form 28. The record of examination and re-examintion carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of those tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit to work in the said processes. (6) No person who has been found unfit to work as said in sub-paragraph (5) shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes. 23. Exemptions―prohibited substances: (1) The Chief Inspector may by a certificate in writing (which he may at his discretion revoke at any time) , subject to such conditions if any, as may be specified therein, exempt any process in the
![Page 167: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/167.jpg)
167course of which any of the prohibited substances is formed, processed, manufactured, handled or used, from the provision of paragraph 5 if he is satisfied that the process is carried out in a totally enclosed and hermetically sealed system in such a manner that the prohibited substance is not removed from the system except in quantities not greater than that required for the purpose of control of the process or such purposes as is necessary to ensure that the product is free from any of the prohibited substances. (2) The Chief Inspector may allow the manufacture, handling or use of benzidine hydrochloride provided that all the processes in connection with it are carried out in a totally enclosed system in such a manner that no prohibited substances other than benzidine hydrochloride is removed therefrom except in quantities not greater than that required for the purpose of control of the processes or such purposes as is necessary to ensure that the product is free from prohibited substances and that adequate steps are taken to ensure that benzedine hydrochloride is, except while not in a totally enclosed system, kept wet with not less than one part of water to two parts of benzidine hydrochloride at all times. 24. Exemptions―general : If in respect of any factory, the Chief Inspector is satisfied that owing to the exceptional circumstances or infrequency of the processes or for any other reason, all or any of the provisions of this schedule is not necessary for the protection of the workers in the factory, the Chief Inspector may by a certificate in writing (which he may in his discretion revoke at any time), exempt such factory from all or any of such provisions subject ot such conditions if any, as he may specify therein.
APPENDIX CAUTIONARY PLACARD/ NOTICE Carcinogenic dye intermediates. 1. Dye intermediates which are nitro amino derivatives or aromatic hydrocarbons are toxic. You have to handle
these chemicals frequently in this factory. 2. Use the various items of protective wear to safeguard your own health. 3. Maintain scrupulous cleanliness at all times. Thoroughly wash hands and feet before taking meals. It is essential
to take a bath before leaving the factory. 4. Wash off any chemical falling on your body with soap and water. If splashed with a solution of the chemical,
remove the contaminated clothing immediately. These chemicals are known to produce cyanosis. Contact the Medical Officer or appointed doctor immediately and get his advice.
5. Handle the dye intermediates only with a long handled scoops, never with bare hands. 6. Alcoholic drinks should be avoided as they enhance the risk of poisoning by the chemicals. 7. Keep your food and drinks away from work place. Consuming food, drinks or tobacco in any form at the place
of work is prohibited. 8. Serious effects from work with toxic chemicals may follow after many years. Great care must be taken to
maintain absolute cleanliness of body, clothes, machinery and equipment.
SCHEDULE XXIV OPERATIONS INVOLVING HIGH NOISE LEVELS 1. Applications: This schedule shall appy to all operations in any manufacturing process having high noise level. 2. Definitions: For the purpose of this schedule― (a) “Noise” means any unwanted sound; (b) “High noise level”
means any noise level measured on the A-weighted scale is 90 dB or above; (c) “Decibel” means one-tenth of “Bel” which is the fundamental division of a logarithmic scale used to express the ratio of two specified or implied quantities, the number of “bels” denoting such a ratio being the logarithm to the base of 10 of this ratio. The noise level (or the sound pressure level) corresponds to reference pressure of 20x10ֿ6 newtons per square metre or 0.0002 dynes per square centimetre which is the threshold of hearing, that is, the lowest sound pressure level necesary to produce the sensation of hearing in average healthy listeners. The decibel in abbreviated form is dB; (d) “Frequency” is the rate of pressure variations expressed in cycles per second or hertz; (e) “dBA” refers to sound level in decibels as measured on a sound level meter operating on the A-weighted network with slow meter response; (f) “A-weighted” means making graded adjustments in the intensities of sound of various frequencies for the purpose of noise measurement so that the sound pressure level measured by an instrument reflects the actual response of the human ear to the sound measured.
3. Protection against noise: (1) In every factory , suitable engineering control or administrative measure shall be taken to ensure, so far as is
reasonably practicable, that no worker is exposed to sound levels exceeding the maximum permissible noise exposure levels specified in tables 1 and 2.
TABLE – I Permissible exposure in cases of continuous noise
Total time of exposure (continuous or a number of short term exposures) per day in hours
Sound pressure level in dBA
8 90
![Page 168: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/168.jpg)
168 6 92 4 95 3 97 2 100 1 ½ 102 1 105 ¾ 107 ½ 110 ¼ 115
Notes: 1. No exposure in excess of 115 dBA is to be permitted. 2. For any period of exposure falling in between any figure and the next higher or lower figure as indicated in
column 1, the permissible sound pressure level is to be determined by extrapolation on a proportioate basis. TABLE – 2
Permissible exposure levels of impulsive or impact noise Peak sound pressure level in dB
Permitted number of impulses or impacts per day
140 100 135 315 130 1,000 125 3,160 120 10,000
Notes: 1. No exposure in excess of 140 dB peak sound pressure level is permitted. 2. For any peak sound pressure level falling in between any figure and the next higher or lower figure as
indicated in column 1, the permitted number of impulses or impacts per day is to be determined by extrapolation on a proportionate basis.
(2) For the purposes of this schedule, if the variations on the noise level involve maxima at intervals of one second or
less, the noise is to be considered as a continuous one and the criteria given in table 1 would apply. In other cases, the noise is to be considered as impulsive or impact noise and the criteria given in table 2 would apply. (3) When the daily noise exposure is composed of two or more periods of noise exposure at different levels, their combined effect should be considered, rather than the individual effect of each. The mixed exposure should be considered to exceed the limit value if the sum of the fractions C1+C2 + ............. .Cn, exceeds unity; T1 T2 Tn Where:— C1,C2 etc. indicate the total time of actual exposure at a specified noise level and T1, T2 etc. denote the time of exposure permissible at that level. Noise exposure of less than 90 dBA may be ignored in the above calculation. (4) Where it is not possible to reduce the noise exposure to the levels specified in sub-rule (1) by reasonably
practicable engineering control or administrative measures, the noise exposure shall be reduced to the greatest extent feasible by such control measures and each worker so exposed shall be provided with suitable ear protectors so as to reduce the exposure to noise to the levels specified in sub-rule (1).
(5) Where the ear protectors provided in accordance with sub-paragraph (2) and worn by a worker cannot still attenuate the noise reaching near his ear, as determined by subtracting the attenuation value in dBA of the ear protectors concerned from the measured sound pressure level to a level permissible under Table 1 or Table 2 as the case may be, the noise exposure period shall be suitably reduced to correspond to the permisible noise exposures specified in sub-paragraph (1). (6 ) (a) In all cases where the prevailing sound levels exceeds the permissible levels specified in sub-paragraph (1) there shall be administered an effective hearing conservation programme which shall include among other hearing conservation measures, pre-employment and periodical auditory surveys conducted on workers exposed to noise exceeding the permisiible levels, and rehabilitatioin of such workers either by reducing the exposure to the noise levels or by transferring them to places where noise levels are relatively lesws or by any other suitable means. (b) Every worker employed in areas where the noise exceeds the maximum permissible exposure levels specified in sub-rule (1) shall be subjected to an auditory examination by a Certifying Surgeon within 14 days of his first employment and thereafter, shall be re-examined at least once in every 12 months. Such initial and periodical examinations shall include tests which the Certifying Surgeon may consider appropriate, and shall include determination of auditory thresholds for pure tones of 125, 250, 500,1000,2000, 4000 and 8000 cycles per second.
![Page 169: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/169.jpg)
169 SCHEDULE XXV MANUFACTURE OF RAYON BY VISCOSE PROCESS 1. Definition: For the purpose of this schedule— (a) “approved” means aproved for the time being in writing by the Chief Inspector; (b) “breathing apparatus” means a helmet or face piece with necessary connections by means of which the person using it in a poisonous, asphyxiating or irritant atmosphere breathes unpolluted air; or any other approved apparatus; (c) “churn” means the vessel in which alkali cellulose pulp is treated with carbon disulphide; (d) “dumping” means transfer ofcellulose xanthate from a dry churn to a dissolver; (e) “efficient exhaust draught” means localised ventilation by mechanical means for the removal of any gas or vapour, so as to prevent it from escaping into the air of of any place in which work is carried on. No draught shall be deemed to be efficient if it fails to control effectively any gas or vapour generated at the point where such gas or fume originates; (f) “fume process” means any process in which carbon disulphide or hydrogen sulphide is produced, used or given off; (g) “life belt” means a belt made of leather or other suitable material which can be securely fastened round the body with suitable length of rope attached to it, each of which is sufficiently strong to sustain the weight of a man; 2. Ventilation: (1) In all work rooms where a fume process is carried on, adequate ventilation by natural or mechanical means shall be provided so as to control, in associatioin with other control measures, the concentration of the pollutants in the air of every work environment within the permissible limits. (2) An efficient exhaust draught shall be provided and maintained to control gas or vapour at the following locations:― (a) dumping hoppers of dry churns; (b) spinning machines; (c) trio rollers and cutters used in stapple fibre spinning; (d) hydro-extractors for yarn cakes; (e) after treatment processes; and (f) spin baths. (3) In so far as the spinning machines and trio rollers and cutters used in staple fibre spinning are concerned, they shall be for the purpose of ensuring the effectiveness of the exhaust draft to be provided as required in sub-paragraph (1), enclosed as fully as practicable and provided with suitable shutters in sections to enable the required operations to be carried out without giving rise to undue quantities of vapours of pollutants escaping to the work environment. (4) No dry churns shall be opened after completion of reaction without initially exhausting the residual vapours of carbon disulphide by operation of a suitable and efficient arrangement for exhausting the vapours wich shall be continued to be operated as long as the churn is kept opened. (5) Whenever any ventilation apparatus normally required for the purpose of meeting the requirements in sub-paragraphs (2), (3) and (4) is ineffective, fails or is stopped for any purpose whatsoever, all persons shall be required to leave the work areas where the equipment or processes specified in the above said sub-paragraphs are in use, as soon as possible and in anycas not later than 15 minutes after such an occrrence.
(6) (i) All ventilation systems provided for the purposes as required in sub-paragraphs (2), (3) and (4) shall be examined and inspected once every week by a responsible person. It shall be thoroughly examined and tested by a competent person once in every period of 12 months. Any defects found by such examinations or tests shall be rectified forthwith; (ii) A register containing particulars of such examinatiions and tests and the state of the systems and the repairs or alterations (if any) found to be necessary shall be kept and shall be available for inspection by an Inspector. 3. Waste from spinning machines: Waste yarn from the spinning machines shall be deposited in suitable containers provided with close fitting covers. Such wastes shall be disposed off as quickly as possible after decontamination. 4. Lining of dry churns: The inside surface of all dry churns shall be coated with a non-sticky paint so that cellulose xanthate will not stick to the surface of the churns. Such coating shall be maintained in good condition. 5. Air monitoring: (1) To ensure the effectiveness of the control measures, monitoring of carbon disulphide and hydrogen sulphide in air shall be carried out once atleast in every shift and the record of the results so obtained shall be entered in a register specially maintained for the purpose; (2) For the purpose of the requirement in sub-paragraph (1) instantaneous gas detector tubes shall not be used. Samples shall be collected over a duration of not less than 10 minutes and analysed by an approved method. The locations whrer such monitoring is to be done shall be as directed by the Inspector; (3) If the concentration of either carbon disulphide or hydrogen sulphide exceeds the permissible limits for such vapour or gas laid down in Rule 123A, suitable steps shall be taken for controlling the concentrations in air of such contaminants. Areport of such occurrences shall be sent to the Chief Inspector forthwith. 6. Prohibition to remain in fume process room: No person during his intervals for meal, or rest shall remain in any room wherein fume process is carried on. 7. Prohibition relating to employment of young persons: No young person shall be employed or permitted to work in any fume process or in any room in which any such process is carried on. 8. Protective equipment: The occupier shall provide and maintain in good condition protective equipment as specified in the Table for use of persons employed in the processes referred to therein. TABLE Process Protective Equipment 1. Dumping Overalls,face shields,gloves and foot wear—all made of
![Page 170: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/170.jpg)
170suitable material.
2. Spinning Suitable approns,gloves and footwear. 3. Process involving or likely to involve contact with viscose solution
Suitable gloves and footwear.
4. Handling of sulphur Suitable chemical goggles. 5 Any other process involving contact with hazardous chemicals
Protective equipment as may be directed by the Chief Inspector by an order in writing.
(2) A suitable room or locker shall be provided exclusively for the storage of all the protective equipment supplied to workers and no such equipment shall be stored at any place other than the room, roms or lockers so provided. 9. Breathing apparatus: (1) There shall be provided in every factory where fume process is carried on, sufficient supply of— (a) breathing appaqratus; (b) oxygen and suitable appliances for its administration; and (c) life belts. (2) (i) The breathing apparatus and other appliances referred to in sub-paragraph (1) shall be maintained in good condition and kept in appropriate locations so as to be readily available; (ii) The breathing apparatus and other appliances referred to in clauses (a) and (b) of sub-paragraph (1) shall be cleaned and disinfected at suitable intervals and thoroughly inspected once every month by a responsible person; (iii) A record of the maintenance and of the condition of the breathing apparatus and other appliances referred to in sub-clause (i) shall be entered in a register provided for that purpose which shall be readily available for inspection by an Inspector. (3) Sufficient number of workers shall be trained and periodically retrained in the use of breathing apparatus and administering artificial respiration so that at least two such trained persons would be available during all the working hours in each room in which fume process is carried on. (4) Breathing aparatus shall be kept properly labelled in clean,dry, light-proof cabinetsa and if liable to be affected by fumes, shall be protected by placing them in suitable containers. (5) No person shall be employed to perform any work specified in sub-paragraph (1) for which breathing apparatus is necssary to be provided under that sub-paragraph unless he ias been fully instructed in the proper use of that equipment. (6) No breathing apparatus provided in pursuance of sub-paragraph (1) which has been worn by a person shall be worn by another person unless it has been thoroughly cleaned and disinfected since last being worn and the person has been fully instructed in the proper use of that equipment. 10. Electric fittings: All electric fittings in any room in which carbon disulphide is produced, used or given off or is likely to be given off into the work environment, other than a spinning room, shall be of flame-proof construction and all electric conductors shall either be enclosed in metal conduits or be lead-sheathed. 11. Prohibition relating to smoking etc.: No person shall smoke or carry matches, fire or naked light or other means of producing a naked light or spark in a room in which fume process is carried on. A notice in the language understood by the majority of the workers shall be posted in prominent locations in the plant prohibiting smoking and carrying of matches, fire or naked light or other means of producing naked light or spark into such rooms; Provided that fire, naked light or other means of producing a naked light or spark may be carried on in such room only when required for the purposes of the process itself under the direction of a responsible person. 12. Washing and bathing facilities: (1) There shall be provided and maintained in a clean state and in good repair for the use of all workers employed in the processes covered by the schedule, adequate washing and bathing places having a constant supply of water under cover at the rate of one such place for every 25 such persons employed; (2) The washing places shall have standpipes placed at intervals of not less than one metre; (3) Not less than one half of the total number of washing places shall be provided with bathrooms; (4) Sufficient supply of clean towels made of suitable materials shall be provided; provided that such towels shall be supplied individually for each worker if so ordered by the Inspector; (5) Sufficient supply of soap and nail brushes shall be provided. 13. Rest rooms: A rest room shall be provided for the workers engaged in dofing operations of filament yarn spinning process; (2) Such rest room shall be provided with fresh air supply and adequate seating arangement. 14. Cautiion notice and instructions: (1) The following cautionary notice shall be prominently displayed in each fume process room. This notice shall be in a language understood by the majority of the workers and displayed where it can be easily and conveniently read. If any worker is illiterate, effective steps shall be taken to explain carefully to him the contents of the notice so displayed.
CAUTIONARY NOTICE 1. Carbon disulphide (CS/2) and Hydrogen sulphide (H2/S) which may be present in this room are hazardous to health 2. Follow safety instructions. 3. Smoking is strictly prohibited in this area. 4. Use protective equipment and breathing apparatus as and when required.
(2) The occupier shall make arrangements to instruct each worker employed in the fume process room regarding the health hazard connected with their work and the preventive measures and method to protect themselves. Such instructions shall be given on his first employment and repeated periodically;
![Page 171: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/171.jpg)
171 (3) Simple and special instructions shall be framed to ensure that effective measures will be carried out in case of emergency involving escape of carbon disulphide and hydrogen sulphide. Those instructions shall be displayed in the concerned areas and the workers shall be instructed and trained in the actions to be taken in such emergencies. 15. Medical facilities and records of examinations and tests: (1) The occupier of each factory to which this schedule applies, shall— (a) employ a qualified Medical Officer for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the said medical officer all the necessary facilities for the purpose referred to in clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical officer shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 16. medical examination by the Certifying Surgeon: (1) Every worker employed in any fume process shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include tests for estimation of exposure-co-efficient (iodine azide test on urine), as well as electro-cardiogram (ECG) and Central Nervous System (CNS) tests. No worker shall be allowed after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon, The person so suspended from the process shall be
provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated;
(2) Every worker employed in any fume process shall be re-examined by a Certfying Surgeon at least once in every twelve calendar months. Such examination shall, wherever the Certifying Surgeon considers appropriate, include all the tests as specified in sub-paragraph (1). (3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 28. The record of re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out under sub-paragraphs (1) and (2) including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he consders that the said person is unfit for work in the fume process. (6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the fume process unless the Certifying Surgeon, after further examination again certifies him fit for employment in such process.
17. Exemptions: If in respect of any factory, The Chief Inspector is satisfied that owing to the exceptional circumstances or infrequency of the processes or for any other reason, all or any of the provisions of this schedule is not necessary for protection of the workers in the factory the Chief Inspector may by a certificate in writing, which he may at his discretion revoke at any time, exempt such factory from all or any of such provisions subject to such conditions if any, as he may specify therein. ______________________________________________________________________________________________
SCHEDULE XXVI HIGHLY FLAMMABLE LIQUIDS AND FLAMMABLE COMPRESSED GASES
1. Application: These rules will be applicable to all factories where highly flammable liquids or flammable compressed gases are manufactured, stored, handled or used. 2. Definitins: For the purpose of this schedule— (a) “highly flammable liquid” means any liquid including its solution, emulsion or suspension which when tested in a manner specified by section 14 and 15 of the Petroleum Act,1934, (30 0f 1934) gives off flammable vapours at a temperature less than 32˚Centigrade; (b) “flammable compressed gas” means flammable compressed gas as defined in section 2 of the Static and Mobile Pressure Vessels (Unfired) Rules- 1981, framed under the Explosives Act,1884. 3. Storage: (1) Every flammable liquid or flammable compressed gas used in every factory shall be stored in suitable fixed storage tank, or in suitable closed vessel located in a safe position under the ground in the open or in a stores room of adequate fire resistsnt construction; (2) Except as necessary for use, operation or maintenance, every vessel or tank which contains or had contained a highly flammable liquid or flammable compressed gas shall be aways kept closed and all reasonably practicable steps shall be taken to contain or immediately drain off to suitable container any spill or leak that may occur. (3) Every container, vessel, tank, cylinder or store room used for storing highly flammable liquid or flammable compressed gas shall be clearly and in bold letters marked “DANGER! HIGHLY FLAMMABLE LIQUID”; OR “DANGER! FLAMMABLE COMPRESSED GAS”. 4. Enclosed systems for conveying highly flammable liquids: Wherever it is reasonably practicable, highly flammable liquids shall be conveyed within a factory in totally enclosed systems consisting of pipelines, pumps and similar appliances from the storage tank or vessel to the point of use. Such enclosed systems shall be so designed, installed, operated and maintained as to avoid leakage or the risk of spilling.
![Page 172: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/172.jpg)
1725. Preventing formation of flammable mixture with air: Wherever there is a possibility for leakage or spill of highly flammable liquid or flammable compressed gas from an equipment, pipe line, valve, joint or other part of a system, all practicable measures shall be taken to contain, drain off or dilute such spills or leakage as to prevent formation of flammable mixture with air. 6. Prevention of ignition: (1) In every room, work place or other location where highly flammable liquid or flammable combustible gas is stored, conveyed, handled or used or where there is danger of fire or explosion from accumulation of highly flammable liquid or flammable compressed gas in air, all practicable measures shall be taken to exclude the sources of ignition. Such precautions shall include the following:―(a) All electrical apparatus shall either be excluded from the area of risk or they shall be of such construction and so installed and maintained as to prevent the danger of their being a source of ignition; (b) effective measures shall be adopted for prevention of accumulation of static charges to a dangerous extent; (c) no person shall wear shoes with iron or steel nails or any other exposed ferrous materials which is likely to cause sparks by friction; (d) smoing, lighting or carrying of matches, lighters or smoking materials shall be prohibited; (e) transmission belts with iron fasteners shall not be used; and (f) all other precautions, as are reasonably practicable, shall be taken to prevent initiation of ignition from all other possible sources such as open flames, frictional sparks, overheated surfaces of machinery or plant, chemical or pysical-chemical reaction and radiant heat. 7. Prohibition of smoking: No person shall smoke in any place where highly flammable liquid or flammable compressed gas is present in circumstances that smoking would give rise to a risk of fire. The occupier shall take all practicable measures to ensure compliance with this requirement including display of a bold notice indicating prohibitioin of smoking at every place where this requirement applies. 8. Fire- fighting: In every factory where highly flammable liquid or flammable compressed gas is manufactured, stored, handled or used, appropriate and adequate means of fighting a fire shalll be provided. The adequacy and suitability of such means which expression includes the fixed and portable fire extinguishing systems, extinguishing material, procedures and the process of fire fighting shall be to the standards and levels prescribed by the Indian standards applicable, and in any case not inferior to the stipulations under Rule 69. 9. Exemptions: If in respect of any factory, the chief Inspector is satisfied that owing to the exceptional circumstances or infrequency of the processes or for any other reason, all or any of the provisions of this schedule is not necessary for protection of the workers in the factory, the Chief Inspector may by a certificate in writing, which he may at his discretion revoke at any time, exempt such factory from all or any of such provisions subject to such conditions, if any, as he may specify therein.
SCHEDULE XXVII
OPERATIONS IN FOUNDRIES 1. Application : Provisions of this schedule shall apply to all parts of factories where any of the following operations or processes are carried on:― (a) the production of iron castings or, as the case may be, steel castings by casting in moulds made of sand, loam, moulding composition or other mixture of materials, or by shell moulding, or by centrifugal casting and any process incidental to such production; (b) the production of non-ferrous castings by casting metal in moulds made of sand, loam, metal, moulding composition or other makings or mixture of materials or by shell mouldings, die-casting (including pressure die-casting), centrifugal casting or continuous casting and any process incidental to such production; and (c) the melting and casting of non-ferrous metal for the production of ingots, billets, slabs or other similar products ;and the stripping thereof:
—but shall not apply with respect to: (a) any process with respect to the smelting and manufacture of lead and the Electric Accumulators; (b) any process for the purposes of a printing works; or (c) any smelting process in which metal is obtained by a reducing operation or any process incidental to such operation; or (d) the production of steel in the form of ingots; or (e) any process in the course of the manufacture of solder or any process incidental to such manufacture; or (f) the melting and casting of lead or any lead-based alloy for the production of ingots, billets, slabs or other similar products or the stripping thereof; or any process incidental to such melting, casting or stripping. 2. Definition: For the purpose of this schedule:― (a) “approved respirator” means a resprator of a type approved by the Chief Inspector; (b) “cupola or furnace” includes a receiver associated therewith; (c) “dressing or fettling operations” includes stripping and other removal of adherent sand, cores, runners, risers, flash and other surplus metal from a casting and the production of reasonably clean and smooth surface, but does not include (i) the removal of metal from a casting when performed incidentally in connection with the machining or assembling or casting after they have been dressed or fettled ;or (ii) any operation which is a knock-out operation within the meaning of this schedule; (d) “foundry” means those parts of a factory in which the production of iron or steel or non-ferrous casting (not being the production of pig iron or the production of steel in the form of ingots) is carried on by casting in moulds made of sand, loam, moulding composition or other mixture of materials, or by shell moulding or by centrifugal casting in metal moulds lined with sand, or die casting including pressure die casting, togetherwith any part of the factory in which any of the following processes are carried on as incidental processes in connection with and in the course of such production, namely
![Page 173: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/173.jpg)
173the preparation and mixing of materials used in foundry process, the preparation of moulds and cores, knock out operations and dressing or fettling operations; (e) “knock out operations” means all methods of removing castings from moulds and the following operations, when done inconnection therewith, namely, stripping, coring-out and the removal of runners and risers; (f) “pouring aisle” means an aisle leading from a main gangway or directly from a cupola or furnace to where metal is poured into moulds. 3. Prohibition of use of certain materials as parting materials: (1) A material should not be used as a parting material if it is a material containing compounds of silicon calculated as silica to the extent more than 5% by weight of the dry material; ―provided that this prohibition shall not prevent the following being used as a parting material if the material does not contain an admixture of any other silica:― (a) Zirconium silicate (Zircon); (b) Calcined china clay; (c) Calcined aluminous fireclay; (d) Silimanite; (e) Calcined or fused alumina; (f) Olivine; and (g) Natural sand. (2) Dust or other matter deposited from a fettling or blasting process shall not be used as a parting material or as a constituent in a parting material. 4. Arrangement and storage: For the purposes of promoting safety and cleanliness in workroom the following requirements shall be observed:― (a) moulding boxes, loam plates, ladles, patterns, pattern plates, frames, boards, box weights and other heavy articles shall be so arranged and placed as to enable work to be carried on without unnecessary risk; (b) suitable and conveniently accessible racks, bins or other receptacles shall be provided and used for the storage of other gear and tools; (c) where there is bulk storage of sand, fuel, metal scrap or other materials or residues― suitable bins, bunkers or other receptacles shall be provided for the purpose of such storage. 5. Construction of floors: (1) Floors of indoor workplaces in which the processes are carried on, other than parts which are of sand, shall have an even surface of hard material; (2) no part of the floor of any such indoor workplace shall be of sand except where this is necessary by reason of the work done; (3) All parts of the surface of the floor of any such indoor workplace which are of sand shall, so far is practicable, be mintained in an even and firm condition. 6. Cleanliness of indoor workplaces: (1) All accessible parts of the walls of every indoor workplace in which the processes are carried on and of everything affixed to those walls shall be effectively cleaned by a suitable method to a height of not less than 4.2 metres from the floor at least once in every period of fourteen months. A record of the carrying out of every such effective cleaning in pursuance of this paragraph including the date (which shalll be not less than five months nor more than nine months after the last immediately preceding washing, cleaning or other treatment); (2) Effective cleaning by a suitable method shall be carried out at least once every working day of all accessible parts of the floor of every indoor workplace in which the processes are carried on , other than parts which are of sand; and the parts which are of sand shall be kept in good order. 7. Manual operations involving molten metal: (1) There shall be provided and properly maintained for all persons employed on manual operations involving molten metal with which they are liable to be splashed, a working space for that operation:― (a) which is adequate for the safe performance of the work; and (b) which, so far as reasonably practicable, is kept free from obstruction. (2) Any operation involving the carrying by hand of a container holding molten metal shall be performed on a floor all parts of which where any person walks while engaged in the operation shall be on the same level; provided that, where necessary to enable the operation to be performed without undue risk, nothing in this paragraph shall prevent the occasional or exceptional useof a working space on a different level from the floor, being a space provided with a safe means of access from the floor for any person while engaged in the operation. 8. Gangways and pouring aisles: (1) In every workroom to which this paragraph applies constructed, reconstructed or converted for use as such after the making of this schedule and, so far as reasonably practicable, in every other workroom to which this paragraph applies, sufficient and clearly defined main gangways shall be provided and properly maintained which:― (a) shall have an even surface of hard material and shall, in particular, not be of sand or have on them more sand than is necessary to avoid risk of flying metal from accidental spillage; (b) shall be kept, so far as reasonably practicable, free from obstruction; (c) if not used for carrying molten metal, shall be at least 920mm in width; (d) if used for carrying molten metal, shall be― (i) where truck ladles are used exclusively, at least 600 mm wider than the overall width of the ladle; (ii) where hand shanks are carried by not more than two men, at least 920 mm. in width; (iii) where land shanks are carried by more than two men, at least 1.2 metres in width; and (iv) where used for simultaneous travel in both directions by men carrying hand shanks, at least 1.8 metres in width. (2) In workroom to which this paragraph applies constructed, reconstructed or converted for use as such after the making of this schedule, sufficient and clearly defined pouring aisles shall be provided and properly maintained which― (a) shall have an even surface of hard material and shall, in particular, not be of sand or have on them more sand than is necessary to avoid risk of flying metal from accidental spillage; (b) shall be kept so far as reasonably practicable free from obstruction; (c) if molten metal is carried in hand ladles or bull ladles by not more than two men per ladle, shall be at least 460 mm wide, but where any moulds alongside the aisle are more than 510 mm above the floor of the aisle, the aisle shall be not less than 600 mm wide; (d) if molten metal is carried in hand ladles or bull ladles by more than two men per ladle, shall be at least 760 mm wide; (e) if molten metal carried in crane, trolley or truck ladles, shall be of a width adequate for the safe performance of the work;
![Page 174: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/174.jpg)
174 (3) Requirements of sub-paragraphs (1) and (2) shall not apply to any workroom or a part of a workroom if by reason of the nature of the work done therein, the floor of that workroom or, as the case may be, that part of a workroom has to be of sand. (4) In this paragraph “workroom to which this paragraph applies” means a part of a ferrous or non-ferrous foundry in which molten metal is transported or used and a workroom to which this paragraph applies shall be deemed for the purposes of this paragraph to have been constructed, reconstructed or converted for use as such after the making of this schedule if the construction, reconstruction or conversion thereof was begun after the making of this schedule. 9. Work near cupolas and furnaces: No person shall carry out any work within a distance of 4 metres from a vertical line passing through the delivery end of any spout of cupola or furnace, being a spout used for delivering molten metal, or within a distance of 24 metres from a vertical line passing through the nearest part of any ladle which is in position at the end of such a spout, except in either case where it is necessary for the proper use or maintenance of cupola or furnace that work should be carried out within that distance of that work being carried out at such a time and under such conditions that there is no danger to the person carrying it out from molten metal which is being obtained from the cupola or furnace or is in a ladle in a position at the end of the spout. 10. Dust and fumes: (1) Open coal, coke or wood fires shall not be used for heating or drying ladles inside a workroom unless adequate measures are taken to prevent, so far as practicable, fumes or other impurities from entering into or remaining in the atmosphere of the workroom (2) No open coal, coke or wood fires shall be used for drying moulds except in circumstances in which the use of such fires is unavoidable. (3) Mould stoves, core stoves and annealing furnaces shall be so designed, constructed, maintained and worked as to prevent, so far as practicable, offensive or injurious fumes from entering into any workroom during any period when a person is employed therein.
(4) All knockout operations shall be carried out― (a) In a separate part of the foundry suitably partitioned off, being a room or part in which so far as reasonably practicable, effective and suitable local exhaust ventilation and a high stamdard of general ventilation are provided; or (b) in an area of the foundry in which, so far as reasonably practicable, effective and suitable local exhaust ventilation is provided; or where compliance with this requirement is not reasonably practicable, a high standard of general ventilation is provided. (5) All dressing or fettling operations shall be carried out― (a) in a separate room or in a separate part of the foundry suitably partitioned off; or (b) in an area of the foundry set apart for the purpose; and shall, so far as reasonably practicable, be carried out with effective and suitable local exhaust ventilation or other equally effective means of suppressing dust, operating as near as possible to the point of origin of the dust. 11. Maintenance and examination of exhaust plant: (1) All ventilation plant used for the purpose of extracting, suppressing or controlling dust or fumes shall be properly maintained; (2) All ventilating plant used for the purpose of extracting, suppressing or controlling dust or fumes shall be examined and inspected once every week by a responsible person. It shall be thoroughly examined and tested by a competent person at least once in every period of twelve months; and particulars of the results of every such examination and test shall be entered in an approved register which shall be available for inspection by an Inspector. Any defect found on any such examination and test shall be immediately reported in writing by the person carrying out the examination and test to the occupier or manager of the factory. 12. Protective equipment: (1) The occupier shall provide and maintain suitable protective equipment specified for the protection of the workers; (a) suitable gloves or other protection for the hands for workers engaged in handling any hot material likely to cause damage to the hands by burn, scald or scar; or in handling pig iron, round castings or other articles likely to cause damage to the hands by cut or abrasion; (b) approved respirators for workers carrying out any operations creating a heavy dust concentration which cannot be dispelled quickly and effectively by the existing ventilation arrangements. (2) No respirators provided for the purposes of clause 1(b) which has been worn by a person shall be worn by another person if it has not since been thoroughly cleaned and disinfected. (3) Persons who for any of their time:― (a) work at a spout of or attend to, a cupola or furnace in such circumstances that material therefrom may come into contact with the body, being material at such a temperature that its contact with the body would cause a burn; or (b) are engaged in ,or in assisting with, the pouring of molten metal; or (c) carry by hand or move by manual power any ladle or mould containing molten metal; or (d) are engaged in knocking-out operations involving material at such a temperature that its contact with the body would cause a burn ; ― shall be provided with suitable footwear and gaiters which worn by them prevent, so far as reasonably practicable, risk of burns to his feet and ankles. (4) Where appropriate,suitable screens shall be provided for protection against flying materials (including splashes of molten metal and sparks and chips thrown off in the course of any process). (5) The occupier shall provide and maintain suitable accommodation for the storage and make adequate arrangements for cleaning and maintaining of the protective equipment supplied in pursuance of this paragraph. (6) Every person shall make full and proper use of the equipment provided for his protection in pursuance of sub-paragraphs (1) and (4) and shall without delay report to the occupier, manager or other appropriate person any defect in, or less of, the same.
![Page 175: THE MEGHALAYA FACTORIES RULES'1980](https://reader031.vdocuments.mx/reader031/viewer/2022012300/61e15f286d508734b61e1606/html5/thumbnails/175.jpg)
17513. Washing and bathing facilities: (1) There shall be provided and maintained in clean state and good repair for the use of all workers employed in the foundry:― (a) a wash place under cover with either:― (i) a trough with impervious surface fitted with a waste pipe without plug and of sufficientlength to allow at least 60 centimetres for every 10 such persons employed at any one time and having a constant supply of clean water from taps or jets above the trough at intervals of not more than 60 cm; or (ii) at least one tap or stand pipe for every 10 such persons employed at any one time, and having a constant supply of clean water, the tap or stand pipe being spaced not less than 1.2 metres apart; and (b) not less than one half of the total number of washing places provided under clause (a) shall be in the form of bath rooms. (c) a sufficient supply of clean towels made of suitabl material changed daily, with sufficient supply of nail brushes and soap. (2) The facilities provided for the purposes of sub-paragraph (1) shall be placed in charge of a responsible person or persons and maintained in a clean and orderly condition. 14. Disposal of dress and skimmings: Dress and skimmings removed from molten metal or taken from a furnace shall be placed forthwith in suitable receptacles. 15. Disposal of waste: Appropriate measures shall be taken for disposal of all waste products from shell moulding (including waste burnt) and as soon as reasonably practicable after the castings have been knocked out. 16. Material and equipment left out of doors: All material and equipment left out of doors (including material and equipment so left only temporarily or occasionally) shall be so arranged and placed as to avoid unnecessary risk. There shall be safe means of access to all such material and equipment and so far as reasonably practicable, such access shall be by roadways or pathways which shall be properly maintained. Such roadways or pathways shall have a firm and even surface and shall, so far as reasonably practicable be kept free from obstruction. 17. Medical facilities and records of examinations and tests: (1) The occupier of every factory to which the schedule applies, shall― (a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and (b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 18. Medical examination by Certifying Surgeon: (1) Every worker employed in a foundry shall be examined by a Certifying Suirgeon within 15 days of his first employment. Such medical examination shall include pulmonary function tests and chest X-ray. No worker shall be alowed to work unless certified fit for such employment by the Certifying Surgeon. (2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every twelve months. Such examination shall, wherever the Certifying Surgeon considers appropriate, include all the tests as specified in sub-paragraph (1) except chest X-ray which will be once in three years. (3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 28. The record of examination and re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the manager of the factory. The record of each examination carried out under sub-paragraph (1) and (2) including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a health register in Form 29. (4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated. (6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certfies him fit for employment in those processes. 19. Exemption: If in respect of any factory, the Chief Inspector is satisfied that owing to the exceptional circumstances or infrequency of the processes or for any other reason, all or any of the provisions of this schedule is not necessary for protection of the workers in the factory, the Chief Inspector may by a certificate in writing, which he may at his discretion revoke at any time, exempt such factory from all or any of such provisions subject to such conditions, if any, as he may specify therein. G.P (Labour) 16/80/150 Dt.12.09.1981 Sd/-
Special Secretary to the Govt. Of Meghalaya. Labour Department