Summary Datasheet
1Q 2015
Previously the NanoNID® & antMODULETM
Network Performance Modules
Accedian Network Performance Modules provide an innovative way to add key Performance Assurance features such as Remote Troubleshooting, Performance Monitoring (PM), and Connectivity Fault Management (CFM) to deployed Carrier Ethernet & IP Services.
The ant and Nano Modules employ a full featured FPGA which can do active Ethernet
testing and traffic generation, in a compact, power-efficient footprint - without compromising
performance or precision. This makes Accedian Modules an ideal fit for cost and space-
sensitive applications where performance is a key service differentiator.
Sharing the same firmware and programmable, FPGA-based hardware architecture, the
ant and Nano can be mixed and matched to adapt to site-specific media requirements.
Key Applications
The densification of service endpoints demands cost-effective QoS visibility with the
accuracy and low-latency performance unmatched by merchant silicon. Wire-speed
processing ensures peak performance in demanding small cell / LTE backhaul, and
business services vCPE applications.
The Modules enhance existing legacy network elements, and enrich green field
deployments with added performance assurance functionality, saving truck rolls and driving
down operational expenses to fit cost-competitive business models. Modules can be
installed in-line or out, allowing service providers to upgrade legacy networks without
downtime.
ant & Nano Performance Modules interoperate with the full line of Accedian Performance
Elements, Actuators, and programmable Platforms to deliver a scalable core-to-edge
performance-assured networking solution tailored to your applications.
Virtualized, programmable instrumentation for QoS monitoring, OAM & turn up testing in compact, cost-effective Modules:
• Low-latency, wire-speed
packet processing for
uncompromised performance
• Zero-touch Plug & Go™ auto
provisioning for customer
self-install
• Full line-rate loopback
support for popular third-party
test sets, 802.3ah & Y.1731
OAM standards works with
existing infrastructure
• RFC-2544 & Y.1731 Service
Activation Testing - including
multi-flow traffic generation -
eliminates the need for on-
site testing
• Standards-based+ Layer 2 &
3 TWAMP Light (Y.1564)
performance monitoring for
core-to-edge QoS visibility
• DOCSIS-friendly
management integration for
easy BSoD deployments.
• NFV-extensible feature set
• 50+ year MTBF
Benefits
Nano & ant
Summary Datasheet • Nano & ant • 1Q 2015
Model Description Part
Number
ANT-1000-TX
10/100/1000 Mbps 6VDC Ethernet Performance-Monitoring Demarcation Device
• One ant 1000 TX unit • DC 6V (power supply sold separately, see below)
772-000
ANT-1000-TX
10/100/1000 Mbps 6VDC Ethernet Performance-Monitoring Demarcation Device with DHCP enabled
• One ant 1000 TX unit
• DC 6V (power supply sold separately, see below)
772-002
Single AC Power Options
APS-6V-NA AC/DC 6V Power Supply Wall Adapter (North America) 720-600
APS-6V-EUR AC/DC 6V Power Supply Wall Adapter (Europe/Russia) 720-601*
APS-6V-UK AC/DC 6V Power Supply Wall Adapter (United Kingdom) 720-602*
APS-6V-AUS AC/DC 6V Power Supply Wall Adapter (Australia/New Zealand) 720-603*
AES-2-WALL Wall mount kit with cable support; fits one ant unit 709-006
*Available soon
Speed Wavelength Media Type Rated
Distance Temperature
Hardened DHCP
Enabled Part
Number
1 Gbps 850nm MMF 550 m • 771-101
1 Gbps 850nm MMF 550 m • • 771-102
1 Gbps 1310nm SMF 10 km • 770-101
1 Gbps 1310nm SMF 10 km • • 770-102
1 Gbps 1310nm SMF 10 km • • 770-110*
1 Gbps 1310nm SMF 10 km • 770-111*
1 Gbps 850nm MMF 550 m • • 771-110*
1 Gbps 850nm MMF 550 m • 771-111*
Note
*These SKUs are Ericsson-coded, which means they only work in the MBS radio and the 3000 series radio. They have been configured with a special security code recognized by Ericsson, which identifies them as genuine Ericsson hardware. Currently, only these two Ericsson radios that have been identified as compatible with these SKUs; there may be more, however.
Power & Connectivity
Connector Type Duplex LC interface
Interface Type ANN-1000-CX: IEEE 802.3z 1000 Base-LX
ANN-1000-CT: IEEE 802.3z 1000 Base-SX
Physical Specifications
Dimensions (nano only) 2.8” L x 8” W x 0.55” H in. (28 L x 80 W x 55 H mm)
Time to Initialize (nano only) 300ms
Environmental
Operating Temperature 0°C to +40°C
Clock Rate 400kHz
Storage Temperature -30°C to +85°C
Operating/Storage Humidity 5-85% RH, non-condensing
Regulatory and Certification
CFR Title 21, Parts 1040.10 and 1040.11 Compliant
FCC Part 15 Class A Compliant
INF-8074i Rev 1.0 Compliant
SFF-8472 Rev 11.0 Compliant
IEC 60980-1 2nd Edition Compliant
IEC 60825-1 2nd Edition Laser Class 1 Compliant
Contact Us
For detailed specifications, ask for a copy of our
Capabilities Matrix. Our engineers can help you
select the right unit for your application:
Accedian.com/Contact
Power6 VDC for
AC Adapter
Port 1 Status Power20-57 VDC
Auto-Ranging Input
Power & Connectivity
DC Power Input 6Vdc, 0.85A max, 2.5W max
Physical Specifications
Dimensions (ant only) 1.15” H x 2.3” W x 5.3” D in. (30 H x 58 W x 135 D mm)
Weight (ant only) 115 g or 4 oz.
Environmental
Operating Temperature 0°C to +40°C
Maximum Altitude 2000 meters above sea level
Storage Temperature -40°C to +70°C
Operating/Storage Humidity 20-80% RH, non-condensing
Regulatory and Certification
FCC Part 15 Class B, ICES-003 Class B
Specifications ant
Nano
© 2015 Accedian Networks Inc. All rights reserved. See Accedian/legal for trademarks. Specifications may change without notice. Some certifications may be pending, contact Accedian for details.
1 GbEOptical
LC
SM (Single-Mode) orMM (Multi-Mode)
Dual MACAddress
Nano Models (SFP Variants)
ant Models & Accessories