1/7
Specification Sheet lumencove® nano 2.0WHITE
EM - R32018.07.11
10-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse Group Inc. 2018
1220 Marie-Victorin Blvd., Longueuil, QC J4G 2H9 CA
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse Group Inc. reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Powered by
TOP VIEW
FRONT VIEW
BOTTOM VIEW
SIDE VIEW
1218 ", 47
12 "
[309mm, 1206mm]
97
16 ", 4434 "
[239mm, 1137mm]
"21
[14mm]Minimumend to end spacing
[81mm]
316
3 "
[35mm]
38
1 "
[60mm]
38
2 "
[36mm]
716
1 "
81° 81°
Maximum Pivot LimitsAdjustable in 9° increments
Client Project name
Order# Type Qty
FEATURES AND BENEFITS
Physical :• Polymer extruded housing • Available in 1' or 4' [0.3m or 1.2m] sections• Adjustable mounting brackets, +/- 81° aiming (tool-less) • Beam angle: 120° x 120°• IP20• White standard finish• Clear high-transmittance polycarbonate injected lens, frosted lens option available• Indoor applications, dry/damp location only• 10 year limited warranty1
Performance :• CRI value: 80+• Binning within a 2 step MacAdam ellipse• Color temperatures: 2700K, 3000K, 3500K or 4000K• Lumen maintenance 100,000 hrs [L70 @ 25°C]• Lumen measurements comply with LM-79-08 standard• Operating temperatures: 0° C to 50° C [32F to 122F]
Electrical :• Line voltage luminaire for 120V, 230V or 277V• Powered by Lumendrive AC step drive, no power supply onboard• Power and data in 1 cable (#16-4), white cable and connector standard• Thumb latch connectors, breakable under load• 3W/ft - RO version, 5W/ft - HO version• Dimming options: 0-10V, DMX and DALI dimming enabled with Digital Data Bridge (accessory)• Lumentalk network enabled with Lumentalk Data Bridge (accessory)
1The limited 10-year warranty is only valid if the product is operated in an ambient environment that does not exceed 25 °C. Otherwise, our limited 5-year warranty shall apply.
updated
2015 09 25
5W/ft te
sted values f
or HO 1ft
CCT [K]
*1ft fixture delivered output ratio = x0.25Frosted lens option delivered output ratio = x0.85
**Estimated. Consult website for latest ies files and reports.
Performance summary4ft fixture, clear lens*
Efficacy[lm/W]
Deliveredoutput [lm]
1,188
1,310
1,265
1,358
RO - Regular output
99.2
109.6
105.7
114.2
Efficacy[lm/W]
Deliveredoutput [lm]
87.6
89.1
98.5
1,668
1,696
1,868
1,840 97.9
HO - High output**
2700K
3000K
3500K
4000K
2/7
Specification Sheet lumencove® nano 2.0WHITE
EM - R32018.07.11
10-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse Group Inc. 2018
1220 Marie-Victorin Blvd., Longueuil, QC J4G 2H9 CA
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse Group Inc. reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
MOUNTING DETAILS
Suggested cove dimensions forminimum cove height
SUGGESTED COVE DIMENSIONS
3"[76mm]
11116
[43mm]
"
11116
[43mm]"
120°
MAXIMUM ANGLE ADJUSTMENTA jumper cable is required for angles greater than 45°.
TOP VIEW
45˚
BREAKABLE TAB
1316
[20mm]"
532
[4mm]"
316
Ø
[5mm]
"
316
Ø
[5mm]
"
178
"
[48mm]
[32mm]
114
"
MOUNTING PLATE DIMENSIONS
3/7
Specification Sheet lumencove® nano 2.0WHITE
EM - R32018.07.11
10-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse Group Inc. 2018
1220 Marie-Victorin Blvd., Longueuil, QC J4G 2H9 CA
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse Group Inc. reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
ACCESSORIESOrder separately, refer to each item’s specification sheet for ordering information
Cables (required):Leader Cable for Lumencove® Nano 2.0, 10ft (3m) or 25ft (7.6m) standard lengths*
Jumper Cable for Lumencove® Nano 2.0, 2ft (0.6m) or 4ft (1.2m) standard lengths
Lumentalk Data Bridge (optional dimming accessory):
DMX, 0-10V and TRIAC inputs enabled via Lumentranslator for the Lumentalk network.Lumentalk control enabled with Lumentalk Data Bridge.
Digital Data Bridge (required for dimming applications)*:Digital Data Bridge converts 0-10V, DALI and DMX control protocols to be compatible with Lumencove® Nano 2.0.
*A Digital Data Bridge is included with every leader cable specified for dimming applications. Refer to the LCN2 leader cable specification sheet for details.
TOP VIEW
FRONT VIEW SIDE VIEW
For 4x 1/4-20 UNC(M6) screws
61116
"[169mm]
163 9"
[91mm]
718 "
[180mm]
1665 "
[160mm]
5 516 "
[135mm]
4"[102mm]
4"[102mm]
[58mm]"42 1
FRONT VIEW
TOP VIEW
SIDE VIEW
UL version
[110mm]"164 5
[110mm]"164 5
[65mm]"162 9
FRONT VIEW
TOP VIEW
SIDE VIEW
CE version
4/7
Specification Sheet lumencove® nano 2.0WHITE
EM - R32018.07.11
10-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse Group Inc. 2018
1220 Marie-Victorin Blvd., Longueuil, QC J4G 2H9 CA
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse Group Inc. reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMS
Wiring Color Code
Notes: • Consult factory for specific applications and maximum fixture count/cable length recommendations.• Regular Output version: 3 watts per foot [0.3m], High Output version: 5 watts per foot [0.3m].
A - Power inputB - To fixtureC - LineD - NeutralE - GroundF - Wire-nuts (by others)G - Junction box (by others)
Non-Dimming (NO)
Maximum run length - Lumencove® Nano 2.0 RO & HO
Cable length/Voltage 120V 230V 277V
150ft [46m] 300ft [91m] 300ft [91m] 25ft [8m] leader cable
Non-Dimming
A
B C D EA B
CDEFG
A - Power input (120V, 230V or 277V, to match fixture specified voltage)B - Junction box (by others) C - Leader cable (LCN2LC)D - Lumencove Nano 2.0 (LCN2) E - Jumper cable (LCN2JC)
Non-Dimming (NO) - Wiring detail
AmericanColor Code
CEColor Code
Black Brown
Red BlackOrange Grey
White Blue
USE
Line
Data +Data -
Line/Neutral
5/7
Specification Sheet lumencove® nano 2.0WHITE
EM - R32018.07.11
10-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse Group Inc. 2018
1220 Marie-Victorin Blvd., Longueuil, QC J4G 2H9 CA
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse Group Inc. reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMS - continued
A - Power input (to match fixture specified voltage)B - Ground (green)C - Data + D - Data - E - Data - (orange)F - Power and data output to fixture (4 or 5C/cable)G - Data + (red)H - Neutral (white)I - Line (black)J - Data input from third party dimmer/controllerK - Data - (orange)L - Data + (purple)M - Neutral (white)N - Line (black)G - Junction box (by others)
A - Power input (to match fixture specified voltage)B - Data - (grey)C - Power and data output to fixture (4 or 5C/cable)D - Data + (black)E - Neutral (blue)F - Line (brown)G - Data input from third party dimmer/controllerH - Data - (grey)I - Data + (black)J - Line (brown)K - Neutral (blue)
Wiring Detail using Digital Data Bridge DDB-DIM, DDB-DALI or DDB-DMX (UL)
A
J
F
INPUT OUTPUT
NM
B
CD
LK
E
HI
G
A C
INPUT OUTPUT B
DEF
G
KJI
H
A - Power input (120V, 230V or 277V, to match fixture specified voltage)B - Third party dimmer/DALI or DMX controllerC - Digital Data Bridge (DDB-DIM, DDB-DALI or DDB-DMX)D - Leader cable (LCN2LC)E - Lumencove Nano 2.0 (LCN2)F - Jumper cable (LCN2JC)
0-10V, DALI or DMX Dimming (Digital Data Bridge required) 10% minimum dimming value for 0-10V dimming, 5% minimum dimming value for DALI and DMX dimming
Maximum run length using Digital Data BridgeLumencove® Nano 2.0 RO & HO
Cable length/Voltage 120V 230V 277V
150ft [46m] 25ft [8m] leader cable
Notes: • Consult factory for specific applications and maximum fixture count/cable length recommendations. • Maximum wire length between Digital Data Bridge and 1st fixture in run is 100ft [30m] assuming 16AWG wire is used.• 0-10V mA ratings: passive dimmer (Current Sink): 3mA per fixture, active dimmer (Current Source): 0.5mA per fixture.• Regular Output version: 3 watts per foot [0.3m], High Output version: 5 watts per foot [0.3m].
Wiring Color CodeAmericanColor Code
CEColor Code
Black Brown
Red BlackOrange Grey
White Blue
USE
Line
Data +Data -
Line/Neutral
Wiring Detail using Digital Data Bridge DDB-DIM, DDB-DALI or DDB-DMX (CE)
A
B
D
C
E F
6/7
Specification Sheet lumencove® nano 2.0WHITE
EM - R32018.07.11
10-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse Group Inc. 2018
1220 Marie-Victorin Blvd., Longueuil, QC J4G 2H9 CA
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse Group Inc. reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
TYPICAL WIRING DIAGRAMS - continued
Lumentalk (LT, Lumentranslator, Lumentalk Data Bridge and Digital Data Bridge required)10 % minimum dimming value
A C GF H I
B
ED
F
A - Third party dimmer/DMX controllerB - Lumentranslator (LTL-010, -DMX)C - Data wiring (by others)D - Power line (120-277V AC)E - Lumentalk Data Bridge (LDB-DIM or LDB-DMX)F - Digital Data Bridge (DDB-DIM or DDB-DMX)G - Leader cable (LCN2LC)H - Lumencove Nano 2.0 (LCN2)I - Jumper cable (LCN2JC)
Wiring Color Code
A - Power input (to match fixture specified voltage)B - Ground (green)C - Data + D - Data - E - Data - (orange)F - Power and data output to fixture (4 or 5C/cable)G - Data + (red)H - Neutral (white)I - Line (black)J - Data input from third party dimmer/controllerK - Data - (orange)L - Data + (purple)M - Neutral (white)N - Line (black)G - Junction box (by others)
A - Power input (to match fixture specified voltage)B - Data - (grey)C - Power and data output to fixture (4 or 5C/cable)D - Data + (black)E - Neutral (blue)F - Line (brown)G - Data input from third party dimmer/controllerH - Data - (grey)I - Data + (black)J - Line (brown)K - Neutral (blue)
Wiring Detail using Digital Data BridgeDDB-DIM or DDB-DMX (UL)
A
J
F
INPUT OUTPUT
NM
B
CD
LK
E
HI
G
A C
INPUT OUTPUT B
DEF
G
KJI
H
Wiring Detail using Digital Data BridgeDDB-DIM or DDB-DMX (CE)
A - Power input (control over power line via Lumentalk system)B - LineC - NeutralD - 0-10V + / Data +E - 0-10V - / Data -F - To next fixtureG - To Digital Data Bridge
Wiring detail using LDB (LDB-DIM or LDB-DMX)
F
A
CB
ED
Notes: • Consult factory for specific applications and maximum fixture count/cable length recommendations.• Maximum wire length between Digital Data Bridge and 1st fixture in run is 100ft [30m] assuming 16AWG wire is used.• Lumentalk Data Bridge and Digital Data Bridge required for Lumentalk applications. All fixtures attached to the Digital Data Bridge will act as 1 zone. For applications with all fixtures controlled as 1 zone: Digital Data Bridge and Lumentalk Data Bridge must be specified as DIM. Maximum of 24 Digital Data Bridges per Lumentalk Data Bridge (LDB-DIM). Consult factory for details. For applications where each Digital Data Bridge is a separate zone: Digital Data Bridge and Lumentalk Data Bridge must be specified as DMX. Maximum of 24 Digital Data Bridges per Lumentalk Data Bridge (LDB-DMX).• For DMX applications: 1 DMX controller per Lumentalk network, maximum of 48 DMX channels per Lumentalk network (minimum step transition update rate is 1 second, minimum fade time between two colors is 1 minute). Consult factory for applications that require additional capabilities.• Maximum of 1 transmitter (Lumentranslator or Lumenlink) per system• No third party fixtures allowed on the same circuit. • Consult factory for DALI Lumentalk applications.• Regular Output version: 3 watts per foot [0.3m], High Output version: 5 watts per foot [0.3m].
Maximum run length using Digital Data BridgeLumencove® Nano 2.0 RO & HO
Cable length/Voltage 120V 230V 277V
150ft [46m] 25ft [8m] leader cable
AmericanColor Code
CEColor Code
Black Brown
Red BlackOrange Grey
White Blue
USE
Line
Data +Data -
Line/Neutral
7/7
Specification Sheet lumencove® nano 2.0WHITE
EM - R32018.07.11
10-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse Group Inc. 2018
1220 Marie-Victorin Blvd., Longueuil, QC J4G 2H9 CA
1.877.937.3003 P.514.937.3003 F. [email protected]
Lumenpulse Group Inc. reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
LCN2 WH 1 2 3 4 5 6 7
HOW TO ORDER
1
Housing:LCN2 RO - Lumencove® Nano 2.0, Regular Output 3W/ftLCN2 HO - Lumencove® Nano 2.0, High Output 5W/ft
2
Certification:UL - UL compliantCE - CE compliant
3
Voltage:120 - 120 volts230 - 230 volts277 - 277 volts
4
Length:12 - 12 1/8 inches (309mm) (0.23kg/0.5 lbs)48 - 47 1/2 inches (1206mm) (0.68kg/1.5 lbs)
5
Colors and Color temperatures:27K - 2700K30K - 3000K35K - 3500K40K - 4000K
6
Lens:CL - Clear lensFR - Frosted lens
7
Finish:WH - White (standard finish)
Notes: LCN2 is suitable for non-dimming and dimmingapplications. For dimming applications, a DigitalData Bridge is required. Specify a dimming controloption in the LCN2 leader cable order code.
Consult the LCN2 leader cable specification sheetfor more information, as well as the accessories page of this specification sheet.