47
4
Solenoid valves, mechanical
and manual valves
Valve control, general symbol
Valve control, roll
Valve control, spring
Valve control, push button
Valve control, pilot valve
Valve control, direct acting solenoid
Valve control, solenoid pilot valve
3/2 valve, normally closed, mono stable, pressure-controlled
with spring return
2/2 valve, normally closed, mono stable, push button-controlled
with spring return
3/2 valve, normally closed
3/2 valve, normally open
5/2 valve, bi stable
5/2 valve, mono stable
5/3 valve, closed center
5/3 valve, open center
5/3 valve, pressurized center
Double 3/2 valve, normally closed/normally closed
Double 3/2 valve, normally closed/normally open
Double 3/2 valve, normally open/normally open
13
2
12
1
2
13
2
13
2
1 35
24
1 35
24
5 1 3
4 2
5 1 3
4 2
5 1 3
4 2
1 3
2
5
4
1 3
2
5
4
1 3
2
5
4
4
48
57
Cv 0.44 58
Cv 0.88 61
Cv 0.05 64
Cv 0.12 65
Cv 0.21 66
Cv 0.74 68
Cv 0.29 70
Cv 0.9 72
Cv 1.4 74
Cv 2.5 76
Cv 0.98–2.45 79
Cv 0.19 80
Cv 0.5 81
Cv 1 83
Cv 0.08–0.12 84
Cv 0.25 86
Cv 0.8 90
Cv 2 94
Cv 4.7 98
Cv 0.28 98
Cv 0.23 99
Cv 0.48 101
Cv 0.56 102
Cv 0.93 104
Cv 1.6 106
Cv 0.28–0.93 108
Cv 1.4 109
Cv 0.8 110
Cv 1 111
Cv 1.5 113
Cv 3.2 115
Cv 4.9 117
Cv 1.5–4.9 118
Cv 0.006–0.021 119
Cv 0.008–0.016 120
Cv 0.008 121
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
4/2, 5/2 and 5/3 solenoid valvesSY3000 & -5000 – overview
SY3000 – solenoid valve, plug-in
SY5000 – solenoid valve, plug-in
VQD1000 – 4/2 solenoid valve
SYj3000 – solenoid valve
SYj5000 – solenoid valve
SYj7000 – solenoid valve
SY3000 – solenoid valve
SY5000 – solenoid valve
SY7000 – solenoid valve
SY9000 – solenoid valve
VF3000 & -5000 – solenoid valve
SY3060 – valve manifold, cassette type
SY5060 – valve manifold, cassette type
SY7060 – valve manifold, cassette type
Sj2000 & -3000 – solenoid valve manifold, plug-in, cassette type
VQC1000 – solenoid valve, plug-in
VQC2000 – solenoid valve, plug-in
VQC4000 – solenoid valve, plug-in
VQ5000 – solenoid valve, plug-in
ContentsSV1000 – solenoid valve, tie rod type
SV1000 – solenoid valve, cassette type
SV2000 – solenoid valve, tie rod type
SV2000 – solenoid valve, cassette type
SV3000 – solenoid valve, plug-in
SV4000 – solenoid valve, plug-in
SV1000, -2000 & -3000 – solenoid valve, body ported
VFn nAMuR – solenoid valve
VFS2000 – solenoid valve, plug-in
VSR8-4 & VSS8-4 – solenoid valve, plug-in, ISO 15407-2
EVS7-6 & VQ7-6 – solenoid valve, ISO1
EVS7-8 & VQ7-8 – solenoid valve, ISO2
EVS7-10 – solenoid valve, ISO3
EVS7-XSE647 – solenoid valve, ISO
3/2 solenoid valvesS070 – 3/2 miniature solenoid valve
V114 & V111 – solenoid valve
VV100 – 3/2 block mounted solenoid valve, cassette type
Multiply Cv by 980 to get a Qn value in ln/min.
4
49
Cv 0.1–0.5 123
Cv 0.2–0.7 125
Cv 0.2 126
Cv 0.9–3.7 127
Cv 7.4–13.1 129
Cv 0.39–0.78 130
Cv 0.05–3.2 131
Cv 0.05–1 133
Cv 7.4–13.1 134
135
136
Cv 0.35–6 137
Cv 0.07–6 137
Cv 0.35–3.3 138
Cv 0.35–8 138
Cv 0.018 139
Cv 0.03–0.04 139
Cv 0.015–0.065 140
Cv 0.03–0.44 141
Cv 0.03–0.44 142
Cv 0.33–2.1 143
Cv 0.23–2.21 144
Cv 0.17–2.2 146
Cv 0.17–2.2 151
Cv 0.61 152
Cv 1.9–13 153
Cv 1.9–12 154
Cv 1.9–12 155
Cv 2.4–12 156
Cv 1–48 157
Cv 1.25–18.3 158
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
SYj300, -500 & -700 – 3/2 solenoid valve
EVT307, VO307 & EVT317 – 3/2 solenoid valve
VKF300 – 3 port direct operated solenoid valve
VP – 3/2 solenoid valve, body ported
VG342 – solenoid valve, body ported, IP65
2/2 solenoid valvesVQ20 & -30 – 2/2 solenoid valve
Mechanical, manual valvesVM, EVM, EVZM, VHK, VH & VR – mechanical, manual valves
air operated valvesSYjA, SYA & EVPA – 3/2, 5/2, 5/3 air operated valve
VGA342 – air operated 3/2 valve, body ported
Proportional flow valvesPVQ10 – proportional flow valve
PVQ30 – proportional flow valve
Media valvesLVC – 2/2 air operated chemical valve
LVA – 2/2 air operated chemical valve
LVH – 2/2 manually operated chemical valve
LVQ – 2/2 air operated corrosion resistant chemical valve
LVM09/090 – 2/3 port direct operated solenoid valve for chemistry & analysis
LVM10/100 – 2/3 port direct operated solenoid valve for chemistry & analysis
LVM15/150 & -20/200 – 2/3 port direct operated solenoid valve for chemistry & analysis
VDW10, -20 & -30 – 2/2 solenoid valve for water & air
VDW200 & -300 – 3/2 solenoid valve for water & air
VCA – solenoid valve for air & inert gases
new VX21, -22 & -23 – normally closed, 2 port direct operated solenoid valve
VX21, -22 & -23 – 2 port direct operated solenoid valve
VXK21, -22 & -23 – 2 port direct operated solenoid valve with built-in strainer
VXK with electronic timer and built-in strainer
VXD21 & -22 – pilot operated solenoid valve for water & other neutral media
VXZ22 & -23 – zero differential pressure solenoid valve with brass body
VXZ22 & -23 – zero differential pressure solenoid valve with stainless steel body
VXS22 & -23 – zero differential pressure solenoid valve for steam
VnB & VnD – 2/2 air operated valve for neutral media or steam
SGC – 2/2 air operated valve for cutting fluids
4
50
Sy3000 Sy7000Sy5000Sy3000 PluG-In
SJ2000/3000
VQD1000
VK3000
SyJ7000 SyJ5000 SyJ3000
SX5000 SX3000 SX7000
VQZ2000VQZ1000 VQZ3000
SV4000SV2000 SV1000 SV3000
VQ5000 VQC4000 VQC2000 VQC1000
VF5000 VF3000 VF1000
VQ7-8 VQ7-6
VFr6000 VFr5000VFr3000 VFr2000 VFr4000
VP4070 VP4050
VZS3000 VZS2000
VQZ2000 VQZ1000 VQZ3000
VS410
VQ5000 VQC4000 VQC2000 VQC1000
VQ7-8 VQ7-6
VFS6000 VFS5000VFS4000 VFS1000 VFS3000VFS2000
Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø140 Ø160 Ø180 Ø200 Ø250 Ø300
VQD1 0.07 2 M5 4
VK1 0.12 4 M5, 1/8 4, 6
SJ 0.08–0.12 0.6 M3, M5 2, 4, 6
SyJ 0.12–0.74 0.35 (0.1)2 M3, M5, 1/8, 1/4 4, 6, 8
SX 0.18–0.82 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10
VQZ 0.32–1.2 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
SV 0.28–1.6 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VQ/VQC 0.2–4.7 0.4 M5 3.2, 4, 6, 8, 10, 12
Sy 0.26–2.5 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VF 0.13–3 1.8 M5, 1/8, 1/4, 3/8, 1/2 —
VQ7 1.4–3.3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10
VFr 0.7–10.6 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
VP4 5.6–16.7 12 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 —
VZS 0.33–0.53 1.8 1/8, 1/4 4, 6, 8
VQZ 0.17–0.74 1 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
VS4 1 5.5 1/8, 1/4, 3/8 —
VQ/VQC 0.18–3.4 1 M5, 1/4, 3/8 3.2, 4, 6, 8, 10, 12
VQ7 1.1–3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10, 12
VFS 0.4–9 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
Sy9000 (see example 1)
Seal typerubber seal: Resistant to dust when the seals between the spool and sleeve are made of rubber.
Metal seal: Long life thanks to the air bearing be-tween metal spool and steel sleeve.
Directional control valves – solenoid valves
Conditions■ Pressure: 0.5 MPa■ Tubing length: 1 m■ Load: 50%■ Stroke: 200 mm■ Speed: 100 mm/s or lower
Cylinder size and speedExample 1: When using the valve series SY9000 (2500 ln/min) for driving Ø40 to Ø100 cylinders, they will have an average speed under the following conditions.
Ideal size for actuator control
Sea
l typ
e,
mai
n v
alve
Valve series
Flow characteristics
A, BE(2 position/ mono stable)
Applicable cylinder Speed: 100 mm/s or lower
Power consumption (W)
Connection size
Threaded connection (G)
Push-in fitting (Ø)applicable tubing size (mm) Cv value3
Rub
ber
sea
lM
etal
sea
l
1. Only available with single coil. 2. number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.
4
51
1 2
VFr6000
VP4070
VFS6000
Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø140 Ø160 Ø180 Ø200 Ø250 Ø300
VQD1 0.07 2 M5 4
VK1 0.12 4 M5, 1/8 4, 6
SJ 0.08–0.12 0.6 M3, M5 2, 4, 6
SyJ 0.12–0.74 0.35 (0.1)2 M3, M5, 1/8, 1/4 4, 6, 8
SX 0.18–0.82 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10
VQZ 0.32–1.2 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
SV 0.28–1.6 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VQ/VQC 0.2–4.7 0.4 M5 3.2, 4, 6, 8, 10, 12
Sy 0.26–2.5 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VF 0.13–3 1.8 M5, 1/8, 1/4, 3/8, 1/2 —
VQ7 1.4–3.3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10
VFr 0.7–10.6 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
VP4 5.6–16.7 12 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 —
VZS 0.33–0.53 1.8 1/8, 1/4 4, 6, 8
VQZ 0.17–0.74 1 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
VS4 1 5.5 1/8, 1/4, 3/8 —
VQ/VQC 0.18–3.4 1 M5, 1/4, 3/8 3.2, 4, 6, 8, 10, 12
VQ7 1.1–3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10, 12
VFS 0.4–9 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
5 port for pneumatics
Power consumptionreduction of necessary power for the valveWith power saving circuit: The power consumption is reduced to one quarter of the standard product power consumption. (The effect occurs when the on time is greater than 62 ms and operated at rated voltage of 24 VDC.)
Electrical circuit (with energy saving circuit)
1: Actuation power 2: Holding current
Red (+)
Coil
Tim
e ci
rcui
t LED
Dio
de
Black (–)
Ideal size for actuator control
Sea
l typ
e,
mai
n v
alve
Valve series
Flow characteristics
A, BE(2 position/ mono stable)
Applicable cylinder
Power consumption (W)
Connection size
Threaded connection (G)
Push-in fitting (Ø)applicable tubing size (mm) Cv value3
Rub
ber
sea
lM
etal
sea
l
1. Only available with single coil. 2. number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.
4
52
Sy3000 Sy7000Sy5000Sy3000 PluG-In
SJ1000/2000
VQD1000
VK3000
SyJ7000 SyJ5000 SyJ3000
SX5000 SX3000 SX7000
VQZ2000VQZ1000 VQZ3000
SV4000SV2000 SV1000 SV3000
VQ5000 VQC4000 VQC2000 VQC1000
VF5000 VF3000 VF1000
VQ7-8 VQ7-6
VFr6000 VFr5000VFr3000 VFr2000 VFr4000
VP4070 VP4050
VZS3000 VZS2000
VQZ2000 VQZ1000 VQZ3000
VS410
VQ5000 VQC4000 VQC2000 VQC1000
VQ7-8 VQ7-6
VFS6000 VFS5000VFS4000 VFS1000 VFS3000VFS2000
Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø140 Ø160 Ø180 Ø200 Ø250 Ø300
VQD1 0.07 2 M5 4
VK1 0.12 4 M5, 1/8 4, 6
SJ 0.08–0.12 0.6 M3, M5 2, 4, 6
SyJ 0.12–0.74 0.35 (0.1)2 M3, M5, 1/8, 1/4 4, 6, 8
SX 0.18–0.82 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10
VQZ 0.32–1.2 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
SV 0.28–1.6 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VQ/VQC 0.2–4.7 0.4 M5 3.2, 4, 6, 8, 10, 12
Sy 0.26–2.5 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VF 0.13–3 1.8 M5, 1/8, 1/4, 3/8, 1/2 —
VQ7 1.4–3.3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10
VFr 0.7–10.6 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
VP4 5.6–16.7 12 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 —
VZS 0.33–0.53 1.8 1/8, 1/4 4, 6, 8
VQZ 0.17–0.74 1 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
VS4 1 5.5 1/8, 1/4, 3/8 —
VQ/VQC 0.18–3.4 1 M5, 1/4, 3/8 3.2, 4, 6, 8, 10, 12
VQ7 1.1–3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10, 12
VFS 0.4–9 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
Sy9000 (see example 1)
Ideal size for actuator control
Sea
l typ
e,
mai
n v
alve
Valve series
Flow characteristics
A, BE(2 position/ mono stable)
Applicable cylinder Speed: 300 mm/s or lower
Power consumption (W)
Connection size
Threaded connection (G)
Push-in fitting (Ø)applicable tubing size (mm) Cv value3
Rub
ber
sea
lM
etal
sea
l
1. Only available with single coil. 2. number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.
Directional control valves – solenoid valves
Seal typerubber seal: Resistant to dust when the seals between the spool and sleeve are made of rubber.
Metal seal: Long life thanks to the air bearing be-tween metal spool and steel sleeve.
Conditions■ Pressure: 0.5 MPa■ Tubing length: 1 m■ Load: 50%■ Stroke: 200 mm■ Speed: 300 mm/s or lower
Cylinder size and speedExample 1: When using the valve series SY9000 (2500 ln/min) for driving Ø40 to Ø100 cylinders, they will have an average speed under the following conditions.
4
53
1 2
VP4070
Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø140 Ø160 Ø180 Ø200 Ø250 Ø300
VQD1 0.07 2 M5 4
VK1 0.12 4 M5, 1/8 4, 6
SJ 0.08–0.12 0.6 M3, M5 2, 4, 6
SyJ 0.12–0.74 0.35 (0.1)2 M3, M5, 1/8, 1/4 4, 6, 8
SX 0.18–0.82 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10
VQZ 0.32–1.2 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
SV 0.28–1.6 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VQ/VQC 0.2–4.7 0.4 M5 3.2, 4, 6, 8, 10, 12
Sy 0.26–2.5 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VF 0.13–3 1.8 M5, 1/8, 1/4, 3/8, 1/2 —
VQ7 1.4–3.3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10
VFr 0.7–10.6 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
VP4 5.6–16.7 12 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 —
VZS 0.33–0.53 1.8 1/8, 1/4 4, 6, 8
VQZ 0.17–0.74 1 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
VS4 1 5.5 1/8, 1/4, 3/8 —
VQ/VQC 0.18–3.4 1 M5, 1/4, 3/8 3.2, 4, 6, 8, 10, 12
VQ7 1.1–3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10, 12
VFS 0.4–9 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
5 port for pneumaticsIdeal size for actuator control
Sea
l typ
e,
mai
n v
alve
Valve series
Flow characteristics
A, BE(2 position/ mono stable)
Applicable cylinder
Power consumption (W)
Connection size
Threaded connection (G)
Push-in fitting (Ø)applicable tubing size (mm) Cv value3
Rub
ber
sea
lM
etal
sea
l
1. Only available with single coil. 2. number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.
Power consumptionreduction of necessary power for the valveWith power saving circuit: The power consumption is reduced to one quarter of the standard product power consumption. (The effect occurs when the on time is greater than 62 ms and operated at rated voltage of 24 VDC.)
Electrical circuit (with energy saving circuit)
1: Actuation power 2: Holding current
Red (+)
Coil
Tim
e ci
rcui
t LED
Dio
de
Black (–)
4
54
Sy3000 Sy7000Sy5000Sy3000 PluG-In
SJ1000/2000
SX5000 SX3000 SX7000
VQZ2000VQZ1000 VQZ3000
SV4000SV2000 SV1000 SV3000
VQ7-8 VQ7-6
VFr6000 VFr5000VFr3000 VFr2000 VFr4000
VP4070 VP4050
VZS3000 VZS2000
VQZ2000 VQZ1000 VQZ3000
VS410
VQ7-8 VQ7-6
VFS6000 VFS5000VFS4000 VFS1000 VFS3000VFS2000
VQD1000
VK3000
SyJ7000 SyJ5000 SyJ3000
VF5000 VF3000 VF1000
VQ5000 VQC4000 VQC2000 VQC1000
VQ5000 VQC4000 VQC2000 VQC1000
Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø140 Ø160 Ø180 Ø200 Ø250 Ø300
VQD1 0.07 2 M5 4
VK1 0.12 4 M5, 1/8 4, 6
SJ 0.08–0.12 0.6 M3, M5 2, 4, 6
SyJ 0.12–0.74 0.35 (0.1)2 M3, M5, 1/8, 1/4 4, 6, 8
SX 0.18–0.82 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10
VQZ 0.32–1.2 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
SV 0.28–1.6 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VQ/VQC 0.2–4.7 0.4 M5 3.2, 4, 6, 8, 10, 12
Sy 0.26–2.5 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VF 0.13–3 1.8 M5, 1/8, 1/4, 3/8, 1/2 —
VQ7 1.4–3.3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10
VFr 0.7–10.6 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
VP4 5.6–16.7 12 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 —
VZS 0.33–0.53 1.8 1/8, 1/4 4, 6, 8
VQZ 0.17–0.74 1 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
VS4 1 5.5 1/8, 1/4, 3/8 —
VQ/VQC 0.18–3.4 1 M5, 1/4, 3/8 3.2, 4, 6, 8, 10, 12
VQ7 1.1–3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10, 12
VFS 0.4–9 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
Sy9000 (see example 1)
Ideal size for actuator control
Sea
l typ
e,
mai
n v
alve
Valve series
Flow characteristics
A, BE(2 position/ mono stable)
Applicable cylinder Speed: 500 mm/s or lower
Power consumption (W)
Connection size
Threaded connection (G)
Push-in fitting (Ø)applicable tubing size (mm) Cv value3
Rub
ber
sea
lM
etal
sea
l
1. Only available with single coil. 2. number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.
Directional control valves – solenoid valves
Seal typerubber seal: Resistant to dust when the seals between the spool and sleeve are made of rubber.
Metal seal: Long life thanks to the air bearing be-tween metal spool and steel sleeve.
Conditions■ Pressure: 0.5 MPa■ Tubing length: 1 m■ Load: 50%■ Stroke: 200 mm■ Speed: 500 mm/s or lower
Cylinder size and speedExample 1: When using the valve series SY9000 (2500 ln/min) for driving Ø40 to Ø100 cylinders, they will have an average speed under the following conditions.
4
55
1 2
Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø140 Ø160 Ø180 Ø200 Ø250 Ø300
VQD1 0.07 2 M5 4
VK1 0.12 4 M5, 1/8 4, 6
SJ 0.08–0.12 0.6 M3, M5 2, 4, 6
SyJ 0.12–0.74 0.35 (0.1)2 M3, M5, 1/8, 1/4 4, 6, 8
SX 0.18–0.82 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10
VQZ 0.32–1.2 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
SV 0.28–1.6 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VQ/VQC 0.2–4.7 0.4 M5 3.2, 4, 6, 8, 10, 12
Sy 0.26–2.5 0.35 (0.1)2 M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VF 0.13–3 1.8 M5, 1/8, 1/4, 3/8, 1/2 —
VQ7 1.4–3.3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10
VFr 0.7–10.6 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
VP4 5.6–16.7 12 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 —
VZS 0.33–0.53 1.8 1/8, 1/4 4, 6, 8
VQZ 0.17–0.74 1 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
VS4 1 5.5 1/8, 1/4, 3/8 —
VQ/VQC 0.18–3.4 1 M5, 1/4, 3/8 3.2, 4, 6, 8, 10, 12
VQ7 1.1–3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10, 12
VFS 0.4–9 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
5 port for pneumaticsIdeal size for actuator control
Sea
l typ
e,
mai
n v
alve
Valve series
Flow characteristics
A, BE(2 position/ mono stable)
Applicable cylinder
Power consumption (W)
Connection size
Threaded connection (G)
Push-in fitting (Ø)applicable tubing size (mm) Cv value3
Rub
ber
sea
lM
etal
sea
l
1. Only available with single coil. 2. number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.
Power consumptionreduction of necessary power for the valveWith power saving circuit: The power consumption is reduced to one quarter of the standard product power consumption. (The effect occurs when the on time is greater than 62 ms and operated at rated voltage of 24 VDC.)
Electrical circuit (with energy saving circuit)
1: Actuation power 2: Holding current
Red (+)
Coil
Tim
e ci
rcui
t LED
Dio
de
Black (–)
4
56
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
a valve spool change position inside the valve when it is affected manually, with spring force, or when power is applied to the coil. The spool position de-
termines which ports are pressurised and exhausted.Many valves have a so called rubber seal, which can
be compared to a rubber O-ring. This type of seal works very well and is found in many of SMC’s valves.
In some applications, for example high-frequency applications, rubber seal can wear out, and the valves need to be replaced regularly.
SMC offer an optional metal seal for these applica-tions. This option extends the life time of the valve and your application.
A metal seal spool moves in a fixed sleeve, which in turn is rubber sealed against the valve body. The fit be-tween spool and sleeve is very precise.
■ At least 200 million cycles life time. There are docu-mented cases where more than 1 billion cycles have been achieved.
■ Less sensitive to impurities than conventional rubber seal valves.
■ Friction free.■ Air gap between spool and sleeve.■ Highest precision, surface finish, and small gap (1 µm).■ Minimum leakage (slightly more than rubber seal
valve).
Valve series available with metal seal: EVS, SQ, SY, VQ1000/2000/4000, VQ7, VQC and VSS.
SMC’s metal seal valvesValves in high-frequency use often suffer from wear on the seals. SMC’s metal seal valves resist such wear and have superior life time.
Detail of the metal spool inside its sleeve.
4
57■
EX500EX260EX250 EX600
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy3000 & -5000 – overview■ SMC’s new SY3000 and SY5000 series is extremely flexible and versatile.■ The high flow rate version enables you in many cases to use a smaller valve than usually.■ See below for an overview of some series with unique advantages.
Cable interface
Fieldbus interface
Flexibility
D-sub/flat cable
Function modules in sandwich format
Mix SY3000 and SY5000 on the same manifold
Easy to change port mode
Circular multipoleL connection Terminal box
Also available in hygienic design. Contact SMC for more information.
4
58 ■
5 µm
470 ln/min
SY3100-5u1 74 g
SY3100R-5u1 74 g
SY3101K-5u1 76 gSY3101R-5u1 76 gSY3200-5u1 83 gSY3200R-5u1 83 gSY3201K-5u1 86 gSY3201R-5u1 86 gSY3300-5u1 87 gSY3400-5u1 87 gSY3500-5u1 87 gSY3301K-5u1 90 gSY3401K-5u1 90 gSY3501K-5u1 90 gSY3A00-5u1 83 gSY3B00-5u1 83 gSY3C00-5u1 83 g
SS5Y3-50F1-04D-C6F 4SS5Y3-50F1-06B-C6F 6SS5Y3-50F1-08B-C6F 8SS5Y3-50F1-10B-C6F 10SS5Y3-50F1-12B-C6F 12SS5Y3-51F1-04D-C6F 4SS5Y3-51F1-06D-C6F 6SS5Y3-51F1-08D-C6F 8SS5Y3-51F1-10D-C6F 10SS5Y3-51F1-12D-C6F 12
SS5Y3-10S0-02D-C6 2SS5Y3-10S0-04D-C6 4SS5Y3-10S0-06B-C6 6SS5Y3-10S0-08B-C6 8SS5Y3-10S0-10B-C6 10SS5Y3-10S0-12B-C6 12
SS5Y3-10F1-02D-C6 2SS5Y3-10F1-04D-C6 4SS5Y3-10F1-06B-C6 6SS5Y3-10F1-08B-C6 8SS5Y3-10F1-10B-C6 10SS5Y3-10F1-12B-C6 12
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy3000 – solenoid valve, plug-inMedium Air (dry)
Degree of filtrationMax. working pressure 0.7 MPa (7 bar); high pressure type: 1 MPa (10 bar)
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar); metal seal (not double 3/2): 0.1 MPa (1 bar)
Operating temperature –10 to 50 °C
Voltage/power Standard: 24 VDC ±10% (12 VDC on request)/0.4 W (energy saving 0.1 W)
FlowEnclosure IP40/IP67 depending on choice of electrical connection
■ unmatched flexibility and easy configuration because of new internal connector technology and the ability to mix different sizes in the same manifold
Valve – plug-in, 24 VDC
Part number Type Weight5/2 mono stable, rubber seal5/2 mono stable, rubber seal, external pilot5/2 mono stable, metal seal, high pressure5/2 mono stable, metal seal, external pilot5/2 bi stable, rubber seal5/2 bi stable, rubber seal, external pilot5/2 bi stable, metal seal, high pressure5/2 bi stable, metal seal, external pilot5/3 closed center, rubber seal5/3 exhausted center, rubber seal5/3 pressurized center, rubber seal5/3 closed center, metal seal, high pressure5/3 exhausted center, metal seal, high press.5/3 pressurized center, metal seal, high press.Double 3/2 nC/nC, rubber sealDouble 3/2 nO/nO, rubber sealDouble 3/2 nC/nO, rubber seal
All versions available with external pilot supply. Contact SMC for delivery times.
Metal sub plate for D-sub connection – Ø6 mm, add valves and D-sub cable
Part number Valve stations TypeSide portedSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedBottom ported
Valve manifold for fieldbus – circular and L connection, Ø6 mm, add valves and electrical connector
Part number Valve stations TypeSide portedSide portedSide portedSide portedSide portedSide ported
Valve manifold for D-sub connection – Ø6 mm, add valves and D-sub cable
Part number Valve stations TypeSide portedSide portedSide portedSide portedSide portedSide ported
Valve, plug-in
Valve manifold, fieldbus Valve manifold, D-subSub plate, side ported Sub plate, bottom ported
4
59■
SY30M-2-1SA-C4 SY30M-2-1SA-C6 SY30M-2-1DA-C4 SY30M-2-1DA-C6
SY30M-1-1A-C8 —SY30M-1-1AS-C8SY30M-1-1AR-C8
SY30M-1-11A1-C8 —SY30M-1-11AS1-C8SY30M-1-11AR1-C8
SY30M-3-1A-C8 —SY30M-3-1AS-C8SY30M-3-1AR-C8
SY30M-38-1A-C6 Ø6 mm
SY30M-39-1A-C6 Ø6 mm
SY30M-26-1ASY30M-26-2A
SY30M-15-1A
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Manifold bottom plate – side ported
Part number TypeSingle solenoid, Ø4 mmSingle solenoid, Ø6 mmDouble solenoid, Ø4 mmDouble solenoid, Ø6 mm
End plate D-side for fieldbus – circular and L connection, with supply and exhaust, side ported, Ø8 mm
Part number Type
Built-in silencerExternal pilot
Sy3000 – solenoid valve, plug-in
replacement & extension parts
End plate D-side for D-sub connection – with supply and exhaust, side ported, Ø8 mm
Part number Type
Built-in silencerExternal pilot
End plate u-side – with supply and exhaust, side ported, Ø8 mm
Part number Type
Built-in silencerExternal pilot
Individual P-supply – for individual valve
Part number Type
Individual exhaust – for individual valve
Part number Type
Manifold bottom plate End plate D-side, fieldbus End plate D-side, D-sub
Individual P-supply Individual exhaust DIN rail mountBlanking plate
End plate U-side
Blanking plate – for unused valve stations
Part number TypeFor valve manifoldFor metal sub plate
DIn rail mount – for manifold, 1 mount per pack
Part number
4
60 ■
SY30M-14-4A-1-2SY30M-14-4A-1-3SY30M-14-4A-1-4SY30M-14-4A-1-6
SY30M-14-4A-2-3
SY30M-14-4A-3-3
SY30M-14-5AAXT100-MC26AXT100-MC26-015AXT100-MC26-030AXT100-MC26-050AXT100-MC26-080
VVZS3000-21A-2*VVZS3000-21A-3*VVZS3000-21A-4*
VVQC1000-T0-1
SY30M-50-1A
SY30M-24-1A
SY30M-60-1A
SY30M-40-1ASY30M-40-2A
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy3000 – solenoid valve, plug-in
replacement & extension parts
Check valveP-shut-off Double check module Sealing disc
Electrical connectionsl connector cable – 34 wire
Part number TypeConnector with 1,5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 10 m cable
l connector cable – 17 wire
Part number TypeConnector with 3 m cable
l connector cable – 9 wire
Part number TypeConnector with 3 m cable
Circular connector – 26-pin (IP67)
Part number TypeCircular connectorConnector onlyConnector with 1,5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
D-sub cable with connector – 25-pin, in accordance with MIL-norm (0,3 mm2)
Part number TypeConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
terminal box – suitable for same manifolds as fieldbus connection
Part number Type20 connections (IP67)
P-shut-off – for individual valve
Part number
Check valve – for exhaust channels
Part number
Double check module – maintains correct position during long stops
Part number
Sealing discPart number Type
For P-supply (2 different pressures in manifold)For exhaust (2 different exhausts in manifold)
Fieldbus – all SI-units can be used with manifolds for fieldbus, see chapter 5
For other versions, contact SMC.
Circular connector, connector with cable
L connector cable
Circular connector, connector onlyCircular connector
D-sub cable with connector
4
61■
5 µm
1060 ln/min
SY5100-5u1 82 g
SY5100R-5u1 82 g
SY5101K-5u1 91 gSY5101R-5u1 91 gSY5200-5u1 90 gSY5200R-5u1 90 gSY5201K-5u1 101 gSY5201R-5u1 101 gSY5300-5u1 100 gSY5400-5u1 100 gSY5500-5u1 100 gSY5301K-5u1 111 gSY5401K-5u1 111 gSY5501K-5u1 111 gSY5A00-5u1 90 gSY5B00-5u1 90 gSY5C00-5u1 90 g
SS5Y5-10F1-02D-C8 2SS5Y5-10F1-04D-C8 4SS5Y5-10F1-06B-C8 6SS5Y5-10F1-08B-C8 8SS5Y5-10F1-10B-C8 10SS5Y5-10F1-12B-C8 12SS5Y5-11F1-02D-C8 2SS5Y5-11F1-04D-C8 4SS5Y5-11F1-06B-C8 6SS5Y5-11F1-08B-C8 8SS5Y5-11F1-10B-C8 10SS5Y5-11F1-12B-C8 12
SS5Y5-50F1-04D-C8F 4SS5Y5-50F1-06D-C8F 6SS5Y5-50F1-08B-C8F 8SS5Y5-50F1-10B-C8F 10SS5Y5-50F1-12B-C8F 12SS5Y5-51F1-04D-C8F 4SS5Y5-51F1-06D-C8F 6SS5Y5-51F1-08D-C8F 8SS5Y5-51F1-10D-C8F 10SS5Y5-51F1-12D-C8F 12
SS5Y5-10S0-02D-C8 2SS5Y5-10S0-04D-C8 4SS5Y5-10S0-06B-C8 6SS5Y5-10S0-08B-C8 8SS5Y5-10S0-10B-C8 10SS5Y5-10S0-12B-C8 12SS5Y5-11S0-02D-C8 2SS5Y5-11S0-04D-C8 4SS5Y5-11S0-06B-C8 6SS5Y5-11S0-08B-C8 8SS5Y5-11S0-10B-C8 10SS5Y5-11S0-12B-C8 12
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy5000 – solenoid valve, plug-inMedium Air (dry)
Degree of filtrationMax. working pressure 0.7 MPa (7 bar); high pressure type: 1 MPa (10 bar)
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar); metal seal (not double 3/2): 0.1 MPa (1 bar)
Operating temperature –10 to 50 °C
Voltage/power Standard: 24 VDC ±10% (12 VDC on request)/0.4 W (energy saving 0.1 W)
FlowEnclosure IP40/IP67 depending on choice of electrical connection
■ unmatched flexibility and easy configuration because of new internal connector technology and the ability to mix different sizes in the same manifold
Valve – plug-in, 24 VDC
Part number Type Weight5/2 mono stable, rubber seal5/2 mono stable, rubber seal, external pilot5/2 mono stable, metal seal, high pressure5/2 mono stable, metal seal, external pilot5/2 bi stable, rubber seal5/2 bi stable, rubber seal, external pilot5/2 bi stable, metal seal, high pressure5/2 bi stable, metal seal, external pilot5/3 closed center, rubber seal5/3 exhausted center, rubber seal5/3 pressurized center, rubber seal5/3 closed center, metal seal, high pressure5/3 exhausted center, metal seal, high press.5/3 pressurized center, metal seal, high press.Double 3/2 nC/nC, rubber sealDouble 3/2 nO/nO, rubber sealDouble 3/2 nC/nO, rubber seal
All versions available with external pilot supply. Contact SMC for delivery times.Valve manifold for D-sub connection – Ø8 mm, add valves and D-sub cable
Part number Valve stations TypeSide portedSide portedSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedBottom portedBottom ported
Metal sub plate for D-sub connection – Ø8 mm, add valves and D-sub cable
Part number Valve stations TypeSide portedSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedBottom ported
Valve manifold for fieldbus – circular and L connection, Ø8 mm, add valves and electrical connector
Part number Valve stations TypeSide portedSide portedSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedBottom portedBottom ported
Valve, plug-in
Sub plate, side ported Sub plate, bottom ported
Valve manifold, fieldbus, side ported
Valve manifold, D-sub, side ported
4
62 ■
SY50M-2-1SA-C6SY50M-2-1SA-C8 SY50M-2-1DA-C6 SY50M-2-1DA-C8 SY50M-2-2SA-C6SY50M-2-2SA-C8SY50M-2-2DA-C6SY50M-2-2DA-C8
SY50M-2-3SA-C6 SY50M-2-3DA-C4 SY50M-2-3DA-C6
SY50M-1-1A-C10 —SY50M-1-1AS-C10SY50M-1-1AR-C10
SY50M-1-11A1-C10 —SY50M-1-11AS1-C10SY50M-1-11AR1-C10
SY50M-3-1A-C10 —SY50M-3-1AS-C10SY50M-3-1AR-C10
SY50M-38-1A-C8 Ø8 mm
SY50M-39-1A-C8 Ø8 mm
SY50M-26-1ASY50M-26-2A
SY50M-15-1A
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Manifold bottom platePart number Type
Single solenoid, Ø6 mm Side portedSingle solenoid, Ø8 mm Side portedDouble solenoid, Ø6 mm Side portedDouble solenoid, Ø8 mm Side portedSingle solenoid, Ø6 mm Bottom portedSingle solenoid, Ø8 mm Bottom portedDouble solenoid, Ø6 mm Bottom portedDouble solenoid, Ø8 mm Bottom ported
Manifold bottom plate – for mixing SY3000/5000, side ported
Part number TypeSingle solenoid, Ø6 mmDouble solenoid, Ø4 mmDouble solenoid, Ø6 mm
Sy5000 – solenoid valve, plug-in
replacement & extension parts
End plate D-side for fieldbus – circular and L connection, with supply and exhaust, side ported, Ø10 mm
Part number Type
Built-in silencerExternal pilot
End plate D-side for D-sub connection – with supply and exhaust, side ported, Ø10 mm
Part number Type
Built-in silencerExternal pilot
End plate u-side – with supply and exhaust, side ported, Ø10 mm
Part number Type
Built-in silencerExternal pilot
Individual P-supply – for individual valve
Part number Type
Individual exhaust – for individual valve
Part number Type
Blanking plate – for unused valve stations
Part number TypeFor valve manifoldFor metal sub plate
DIn rail mount – for manifold, 1 mount per pack
Part number
Manifold bottom plate End plate D-side, fieldbus End plate D-side, D-sub
Individual P-supply Individual exhaust DIN rail mountBlanking plate
End plate U-side
4
63■
SY50M-50-1A
SY50M-24-1A
SY50M-60-1A
SV2000-59-2A
SY30M-14-4A-1-2SY30M-14-4A-1-3SY30M-14-4A-1-4SY30M-14-4A-1-6
SY30M-14-4A-2-3
SY30M-14-4A-3-3
SY30M-14-5AAXT100-MC26AXT100-MC26-015AXT100-MC26-030AXT100-MC26-050AXT100-MC26-080
VVZS3000-21A-2*VVZS3000-21A-3*VVZS3000-21A-4*
VVQC1000-T0-1
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy5000 – solenoid valve, plug-in
replacement & extension parts
P-shut-off – for individual valve
Part number
Check valve – for exhaust channels
Part number
Double check module – maintains correct position during long stops
Part number
Sealing discPart number Type
For P-supply and exhaust (2 different pressures in manifold)
Electrical connectionsl connector cable – 34 wire
Part number TypeConnector with 1,5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 10 m cable
l connector cable – 17 wire
Part number TypeConnector with 3 m cable
l connector cable – 9 wire
Part number TypeConnector with 3 m cable
Circular connector – 26-pin (IP67)
Part number TypeCircular connectorConnector onlyConnector with 1,5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
D-sub cable with connector – 25-pin, in accordance with MIL-norm (0,3 mm2)
Part number TypeConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
terminal box – suitable for same manifolds as fieldbus connection
Part number Type20 connections (IP67)
Fieldbus – all SI-units can be used with manifolds for fieldbus, see chapter 5
For other versions, contact SMC.
Check valveP-shut-off Double check module Sealing disc
Circular connector, connector with cable
L connector cable
Circular connector, connector onlyCircular connector
D-sub cable with connector
4
64 ■
5 µm0.7 MPa (7 bar)
IP40
VQD1151-5MO-Q 34 g
VQD1151-5MO-M5-Q 54 gVQD1151u-5MO-M5-Q 54 g
VV4QD15-02M5F 2 M5VV4QD15-02C4F-Q 2 4 mmVV4QD15-04C4F-Q 4 4 mmVV4QD15-06C4F-Q 6 4 mmVV4QD15-08C4F-Q 8 4 mm
VQD1000-S-M5 M5
VVQD1000-10A-5
AXT661-14An-30 3000 mm
AXT632-7-13
VQD1000-9-1H
VQD11 -5 l
235
M5
M5
5 24 VDC6 12 VDC
5
lO
MO uVW
-1
G1/8
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
VQD1000 – 4/2 solenoid valveMedium Air or neutral gases
Degree of filtrationMax. working pressureMin. working pressure 0.0 MPa (0 bar) (vacuum: –100 kPa)
Operating temperature –10 to 50 °CVoltage/power 24 V/2 W (high flow type: 3.2 W)
Flow 50 ln/min (high flow type: 70 ln/min)Enclosure
Manual override Push button, non-lockableLeD, surge voltage suppressor Standard. Valve has no polarity
■ Direct acting ■ High flow ■ Compact ■ Low weight■ Also for vacuum (leakage ≤ 0.03 cm3/s He) ■ Quick response time – on: 4 ms; off: 2 ms
Valve – 4/2
Part number Type WeightStandard, including screws and gasketStandard, including plateHigh flow valve
Sub platePart number Stations Connection
Single sub platePart number Connection
Blanking plate – with screws and gasket
Part number
Connector – standard with cable
Part number Cable length
Valve mounting screw – M1.7 × 18 (spare part)
Part number
Gasket – between valve and manifold (spare part)
Part number
Part number: valve
Body type
Body ported (single assembly)Body ported (manifold assembly)Plate assembly
Port size
Body port M5 threadPlate assembly
Without sub plateM5 thread
Electrical connection
L connector without cable, with LED and surge voltage suppressorM connector without cable, with LED and surge voltage suppressor
Valve options
Standard, 2 WHigh flow type, 3.2 W1
Vacuum, 2 WHigh flow type vacuum, 3.2 W1
1. Energy saving circuit.
Valve Sub plate Blanking plate
rated voltage
4
65■
5 µm0.7 MPa (7 bar)
98 ln/min
SYj3143-5LOu-Q 37 gSYj3243-5LOu-Q 55 gSYj3343-5LOu-Q 58 gSYj3443-5LOu-Q 58 gSYj3543-5LOu-Q 58 g
SYj3143-5WAOu-Q 41 gSYj3243-5WAOu-Q 63 gSYj3343-5WAOu-Q 66 gSYj3443-5WAOu-Q 66 gSYj3543-5WAOu-Q 66 g
DXT060-67-01 Rc1/8
SY100-30-4A-6 600 mmSY100-30-4A-30 3000 mm
SY100-68-A-6 600 mmSY100-68-A-30 3000 mm
WX-83S-6 600 mmWX-83S-20 2000 mm
V111-5LOu 24 VDCV111-5WAOu M8, IP65 24 VDC
SY114-5LOu-Q IP50 24 VDC
G1/8
SYj3123-5LOZ-M3-Q M3
SYj3000-22-1-Q M5
SS5Yj3-S41-02-M5F-Q 2 M5SS5Yj3-S41-02-C4F-Q 2 Ø4SS5Yj3-S41-04-M5F-Q 4 M5SS5Yj3-S41-04-C4F-Q 4 Ø4SS5Yj3-S41-06-M5F-Q 6 M5SS5Yj3-S41-06-C4F-Q 6 Ø4SS5Yj3-S41-08-M5F-Q 8 M5SS5Yj3-S41-08-C4F-Q 8 Ø4
SYj3000-21-2A-Q
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
SyJ3000 – solenoid valveMedium Air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)
Operating temperature up to 50 °CVoltage/power 24 VDC (other voltages on request)/0.4 W
FlowEnclosure Standard: IP50 (IP65 with M8 connector)
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard
■ Extremely compact ■ Low power consumption
Valve – 5/2, 5/3, standard IP50, for sub plate assembly
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – 5/2, 5/3 with M8 connector IP65, for sub plate assembly
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Blanking plug – for P-, R-channel
Part number Connection
Connector – standard IP50 with cable
Part number Cable length
Connector – covered IP50 with cable
Part number Cable length
Connector – for M8 connection (IP65)
Part number Cable length
For more cable types, see chapter 5.
Pilot valve – spare part for valve with blue manual override button, new type
Part number Type VoltageStandard IP50
Pilot valve – spare part for valve with orange manual override button, old type
Part number Type Voltage
New SY – blue manual override button
Old SY – orange manual override button
Sub plate
M5 × 0.8 alt. C4
1 not used3 –+ (minus or plus)4 +– (plus or minus)
Wiring for M8 (WAOU)
Valve – 5/2, standard IP50, for individual assembly (body ported)
Part number Connection
For more types or M8 connection, contact SMC.
Single sub plate Part number Connection
Sub platePart number Stations Connection
Blanking plate – for S41, with screws and gasket
Part number
For individual assembly
1 3
4
4
66 ■
5 µm0.7 MPa (7 bar)
SYj5123-5LOu-M5-Q 47 gSYj5223-5LOu-M5-Q 66 gSYj5323-5LOu-M5-Q 75 gSYj5423-5LOu-M5-Q 75 gSYj5523-5LOu-M5-Q 75 g
SYj5123-5WAOu-M5-Q 51 gSYj5223-5WAOu-M5-Q 74 gSYj5323-5WAOu-M5-Q 85 gSYj5423-5WAOu-M5-Q 85 gSYj5523-5WAOu-M5-Q 85 g
SYj5123-5YZ-M5-Q 68 gSYj5223-5YZ-M5-Q 108 gSYj5323-5YZ-M5-Q 119 gSYj5423-5YZ-M5-Q 119 gSYj5523-5YZ-M5-Q 119 g
SS5Yj5-20-02-00F-Q 2 70 gSS5Yj5-20-04-00F-Q 4 118 gSS5Yj5-20-06-00F-Q 6 166 gSS5Yj5-20-08-00F-Q 8 214 gSS5Yj5-20-10-00F-Q 10 262 g
SYj5143-5LOu-Q 45 gSYj5243-5LOu-Q 62 gSYj5343-5LOu-Q 73 gSYj5443-5LOu-Q 73 gSYj5543-5LOu-Q 73 g
SYj5143-5WAOu-Q 51 gSYj5243-5WAOu-Q 74 gSYj5343-5WAOu-Q 85 gSYj5443-5WAOu-Q 85 gSYj5543-5WAOu-Q 85 g
SYj5143-5YZ-Q 68 gSYj5243-5YZ-Q 108 gSYj5343-5YZ-Q 119 gSYj5443-5YZ-Q 119 gSYj5543-5YZ-Q 119 g
SYj5000-22-1F-Q G1/8
SS5Yj5-41-02-M5F-Q 2 M5 86 gSS5Yj5-42-02-C6F-Q 2 Ø6 86 gSS5Yj5-41-04-M5F-Q 4 M5 148 gSS5Yj5-42-04-C6F-Q 4 Ø6 148 gSS5Yj5-41-06-M5F-Q 6 M5 210 gSS5Yj5-42-06-C6F-Q 6 Ø6 210 gSS5Yj5-41-08-M5F-Q 8 M5 272 gSS5Yj5-42-08-C6F-Q 8 Ø6 272 gSS5Yj5-41-10-M5F-Q 10 M5 334 gSS5Yj5-42-10-C6F-Q 10 Ø6 334 g
SYj5000-21-5ASYj5000-21-6A
DXT060-67-01 Rc1/8SY5000-9-1 Rc1/4
G1/8
G1/8
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
SyJ5000 – solenoid valveMedium Air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.15 MPa (1.5 bar)
Operating temperature up to 50 °CVoltage/power 24 VDC (other voltages on request)/0.4 W
Flow Individual assembly 196 ln/min; plate assembly 245 ln/minEnclosure IP50 (IP65 with M8 or DIn connector)
Manual override Standard: non-lockable, lockable on request.LeD, surge voltage suppressor Standard
■ Low weight and power consumption
Valve – individual or manifold assembly
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Manifold plate – type 20
Part number Stations Weight
Valve – plate assembly
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Single sub platePart number Connection
Sub plate – type 41 and 42
Part number Stations Connection Weight
Blanking plate – with screws and gasket
Part number PassarManifold plate type 20Sub plate type 41 and 42
Blanking plug – for P-, R-channel
Part number Connection
Manifold plate
Single sub plate Sub plate
Type 41: G1/8 Type 42: G1/4
For individual or manifold assembly
4
67■
V111-5LOu 24 VDCV111-5WAOu 24 VDCV115-5YZ 24 VDCV115-6YZ 12 VDCV115-3YZ 110 VACV115-4YZ 230 VAC
SY114-5LOu-Q 24 VDCSY115-5YZ 24 VDC
SY100-30-4A-6 600 mmSY100-30-4A-30 3000 mm
SY100-68-A-6 600 mmSY100-68-A-30 3000 mm
WX-83S-6 600 mmWX-83S-20 2000 mm
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Pilot valve – spare part for valve with blue (and yellow) manual override button, new type
Part number Type VoltageStandard (LOu)M8 connector (WAOu)DIn connector (YZ)DIn connector (YZ)DIn connector (YZ)DIn connector (YZ)
Pilot valve – spare part for valve with orange manual override button, old type
Part number Type VoltageStandard (LOu)DIn connector (YZ)
Connector – standard IP50 with cable
Part number Cable length
Connector – covered IP50 with cable
Part number Cable length
Connector – for M8 connection (IP65)
Part number Cable length
For more cable types, see chapter 5.
SyJ5000 – solenoid valve
New SY – blue manual override button
Old SY – orange manual override button
1 not used3 –+ (minus or plus)4 +– (plus or minus)
Wiring for M8 (WAOU)
1 3
4
4
68 ■
5 µm0.7 MPa (7 bar)
SYj7123-5LOu-01F-Q 84 gSYj7223-5LOu-01F-Q 96 gSYj7323-5LOu-01F-Q 106 gSYj7423-5LOu-01F-Q 106 gSYj7523-5LOu-01F-Q 106 g
SYj7123-5WAOu-01F-Q 90 gSYj7223-5WAOu-01F-Q 108 gSYj7323-5WAOu-01F-Q 118 gSYj7423-5WAOu-01F-Q 118 gSYj7523-5WAOu-01F-Q 118 g
SYj7123-5YZ-01F-Q 107 gSYj7223-5YZ-01F-Q 142 gSYj7323-5YZ-01F-Q 152 gSYj7423-5YZ-01F-Q 152 gSYj7523-5YZ-01F-Q 152 g
SS5Yj7-21-02-00F-Q 2 214 gSS5Yj7-21-04-00F-Q 4 344 gSS5Yj7-21-06-00F-Q 6 474 gSS5Yj7-21-08-00F-Q 8 604 gSS5Yj7-21-10-00F-Q 10 634 g
SYj7143-5LOu-Q 84 gSYj7243-5LOu-Q 96 gSYj7343-5LOu-Q 106 gSYj7443-5LOu-Q 106 gSYj7543-5LOu-Q 106 g
SYj7143-5WAOu-Q 90 gSYj7243-5WAOu-Q 108 gSYj7343-5WAOu-Q 118 gSYj7443-5WAOu-Q 118 gSYj7543-5WAOu-Q 118 g
SYj7143-5YZ-Q 107 gSYj7243-5YZ-Q 142 gSYj7343-5YZ-Q 152 gSYj7443-5YZ-Q 152 gSYj7543-5YZ-Q 152 g
SYj7000-22-1F-Q G1/8
SS5Yj7-41-02-01F-Q 2 G1/8 400 gSS5Yj7-42-02-C8F-Q 2 Ø8 400 gSS5Yj7-41-04-01F-Q 4 G1/8 600 gSS5Yj7-42-04-C8F-Q 4 Ø8 600 gSS5Yj7-41-06-01F-Q 6 G1/8 800 gSS5Yj7-42-06-C8F-Q 6 Ø8 800 gSS5Yj7-41-08-01F-Q 8 G1/8 1000 gSS5Yj7-42-08-C8F-Q 8 Ø8 1000 gSS5Yj7-41-10-01F-Q 10 G1/8 1200 gSS5Yj7-42-10-C8F-Q 10 Ø8 1200 g
SYj7000-21-1A-1-Q
SY5000-9-1 Rc1/4
G1/4
G1/8
G1/4
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
SyJ7000 – solenoid valveMedium Air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.15 MPa (1.5 bar)
Operating temperature up to 50 °CVoltage/power 24 VDC (other voltages on request)/0.4 W
Flow Individual assembly 589 ln/min; plate assembly 687 ln/minEnclosure IP50 (IP65 with M8 or DIn connector)
Manual override Standard: non-lockable, lockable on requestLeD, surge voltage suppressor Standard
■ Low weight and power consumption
Valve – individual or manifold assembly
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Manifold platePart number Stations Weight
Valve – plate assembly
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Single sub plate Part number Connection
Sub platePart number Stations Ansl. Weight
Blanking plate – with screws and gasket
Part number
Blanking plug – for P-, R-channel
Part number Connection
Single sub plate
Manifold plate
Sub plate
For individual or manifold assembly
4
69■
V111-5LOu 24 VDCV111-5WAOu 24 VDCV115-5YZ 24 VDCV115-6YZ 12 VDCV115-3YZ 110 VACV115-4YZ 230 VAC
SY114-5LOu-Q 24 VDCSY115-5YZ 24 VDC
SY100-30-4A-6 600 mmSY100-30-4A-30 3000 mm
SY100-68-A-6 600 mmSY100-68-A-30 3000 mm
WX-83S-6 600 mmWX-83S-20 2000 mm
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Pilot valve – spare part for valve with blue (and yellow) manual override button, new type
Part number Type VoltageStandard (LOu)M8 connector (WAOu)DIn connector (YZ)DIn connector (YZ)DIn connector (YZ)DIn connector (YZ)
Pilot valve – spare part for valve with orange manual override button, old type
Part number Type VoltageStandard (LOu)DIn connector (YZ)
Connector – standard IP50 with cable
Part number Cable length
Connector – covered IP50 with cable
Part number Cable length
Connector – for M8 connection (IP65)
Part number Cable length
For more cable types, see chapter 5.
SyJ7000 – solenoid valve
New SY – blue manual override button
Old SY – orange manual override button
1 not used3 –+ (minus or plus)4 +– (plus or minus)
Wiring for M8 (WAOU)
1 3
4
4
70 ■
5 µm0.7 MPa (7 bar)
SY320: 196 ln/min; SY340: 216 ln/min
SY3120-5LOu-M5-Q 51 gSY3220-5LOu-M5-Q 70 gSY3320-5LOu-M5-Q 72 gSY3420-5LOu-M5-Q 72 gSY3520-5LOu-M5-Q 72 g
SY3120-5LOu-C4-Q 51 gSY3220-5LOu-C4-Q 70 gSY3320-5LOu-C4-Q 72 gSY3420-5LOu-C4-Q 72 gSY3520-5LOu-C4-Q 72 g
SY3120-5LOu-C6-Q 51 gSY3220-5LOu-C6-Q 70 gSY3320-5LOu-C6-Q 72 gSY3420-5LOu-C6-Q 72 gSY3520-5LOu-C6-Q 72 g
SY3120-5WAOu-M5-Q 57 gSY3220-5WAOu-M5-Q 82 gSY3320-5WAOu-M5-Q 84 gSY3420-5WAOu-M5-Q 84 gSY3520-5WAOu-M5-Q 84 g
SY3120-5WAOu-C4-Q 67 gSY3220-5WAOu-C4-Q 91 gSY3320-5WAOu-C4-Q 94 gSY3420-5WAOu-C4-Q 94 gSY3520-5WAOu-C4-Q 94 g
SY3120-5WAOu-C6-Q 63 gSY3220-5WAOu-C6-Q 87 gSY3320-5WAOu-C6-Q 90 gSY3420-5WAOu-C6-Q 90 gSY3520-5WAOu-C6-Q 90 g
SX3000-16-1A
SX3000-16-2A
SS5Y3-20-02-00F-Q 2 61 gSS5Y3-20-04-00F-Q 4 87 gSS5Y3-20-06-00F-Q 6 113 gSS5Y3-20-08-00F-Q 8 139 gSS5Y3-20-10-00F-Q 10 165 gSS5Y3-20-12-00F-Q 12 191 g
SY3000-26-19A-Q
DXT060-67-01 Rc1/8
SY3000-38-20A-Q M5
SY3000-39-20A-Q M5
G1/8
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy3000 – solenoid valveMedium Air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)
Operating temperature up to 50 °C Voltage/power 24 VDC ±10% (other voltages on request)/0.4 W
FlowEnclosure Standard: IP50 (IP65 with M8 connector)
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard
■ Compact: 10 mm ■ High flow: 200 ln/min
Valve – individual or manifold assembly, 24 VDCConnection M5, all ports
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø4, supply and exhaust ports M5
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø6, supply and exhaust ports M5
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
For separate pilot supply (-X20), contact SMC.
Valve – individual or plate assembly, M8 connector (IP65)Connection M5, all ports
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø4, supply and exhaust ports M5
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø6, supply and exhaust ports M5
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Bracket – for individual valve (side bracket)
Part number
Bracket – for individual valve (foot bracket)
Part number
Manifold plate – type 20
Part number Stations Weight
Blanking plate – with screws and gasket
Part number
Blanking plug – for P-, R-channel
Part number Connection
Individual P-supply – for valve on manifold plate type 20, with screws and gasket
Part number Connection
Individual r-exhaust – for valve on manifold plate type 20, with screws and gasket
Part number Connection
Manifold plate
For individual or manifold assembly
4
71■
SY3140-5LOu-Q 51 gSY3240-5LOu-Q 69 gSY3340-5LOu-Q 70 gSY3440-5LOu-Q 70 gSY3540-5LOu-Q 70 g
SY3140-5WAOu-Q 57 gSY3240-5WAOu-Q 82 gSY3340-5WAOu-Q 84 gSY3440-5WAOu-Q 84 gSY3540-5WAOu-Q 84 g
SY3000-6A-M5 M5SY3000-6A-C4 SY3000-6A-C6
SY3000-38-2A-Q M5
SY3000-39-2A-Q M5
V111-5LOu 24 VDCV111-5WOu 24 VDC
SY114-5LOu-Q 24 VDC
SY100-30-4A-6 600 mmSY100-30-4A-30 3000 mm
SY100-68-A-6 600 mmSY100-68-A-30 3000 mm
WX-83S-6 600 mmWX-83S-20 2000 mm
SY3000-27-1F-Q
SS5Y3-41-02-M5F-Q 2 110 gSS5Y3-41-04-M5F-Q 4 170 gSS5Y3-41-06-M5F-Q 6 230 gSS5Y3-41-08-M5F-Q 8 290 gSS5Y3-41-10-M5F-Q 10 350 g
SS5Y3-41-02-C6F-Q 2 110 gSS5Y3-41-04-C6F-Q 4 170 gSS5Y3-41-06-C6F-Q 6 230 gSS5Y3-41-08-C6F-Q 8 290 gSS5Y3-41-10-C6F-Q 10 350 gSS5Y3-41-12-C6F-Q 12 410 g
SY3000-26-9A-Q
DXT060-67-01 Rc1/8
KQ2P-04 4KQ2P-06 6KQ2P-08 8KQ2P-10 10
G1/8
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Valve – plate assembly, 24 VDC
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – plate assembly, 24 VDCWith M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Sy3000 – solenoid valve
Connection kit – for SY3000, A-, B-port on valve type 20
Part number Connection
Tubing Ø4 mmTubing Ø6 mm
Individual P-supply – for valve on sub plate type 41, with screws and gasket
Part number Connection
Individual r-exhaust – for valve on sub plate type 41, with screws and gasket
Part number Connection
Pilot valve – spare part for valve with blue (and yellow) manual override button, new type
Part number Type VoltageStandard (LOu)M8 connector (WOu)
Pilot valve – spare part for valve with orange manual override button, old type
Part number Type VoltageStandard (LOu)
Connector – standard IP50 with cable
Part number Cable length
Connector – covered IP50 with cable
Part number Cable length
Connector – for M8 connection
Part number Cable length
For more cable types, see chapter 5.
Single sub platePart number
Sub plate – type 41Connection M5
Part number Stations Weight
Connection Ø6
Part number Stations Weight
up to 20 stations. Different dimensions of cylinder connections can be mixed on type 45-plate. Contact SMC.
Blanking plate – with screws and gasket
Part number
Blanking plug – for P-, R-channel
Part number Connection
Plug – for unused cylinder ports
Part number Plug diameter
New SY – blue manual override button
Old SY – orange manual override button
Sub plate
1 not used3 –+ (minus or plus)4 +– (plus or minus)
Wiring for M8 (WAOU)
1 3
4
4
72 ■
5 µm0.7 MPa (7 bar)
SY520: 500 ln/min; SY540: 520 ln/min (5/3: 400 ln/min)
SY5120-5LOu-C6F-Q 91 gSY5220-5LOu-C6F-Q 111 gSY5320-5LOu-C6F-Q 116 gSY5420-5LOu-C6F-Q 116 gSY5520-5LOu-C6F-Q 116 gSY5120-5YZ-C6F-Q 112 gSY5220-5YZ-C6F-Q 153 gSY5320-5YZ-C6F-Q 158 gSY5420-5YZ-C6F-Q 158 gSY5520-5YZ-C6F-Q 158 gSY5120-5WAOu-C6F-Q 116 gSY5220-5WAOu-C6F-Q 161 gSY5320-5WAOu-C6F-Q 166 gSY5420-5WAOu-C6F-Q 166 gSY5520-5WAOu-C6F-Q 166 g
SY5120-5LOu-C8F-Q 82 gSY5220-5LOu-C8F-Q 103 gSY5320-5LOu-C8F-Q 108 gSY5420-5LOu-C8F-Q 108 gSY5520-5LOu-C8F-Q 108 gSY5120-5YZ-C8F-Q 103 gSY5220-5YZ-C8F-Q 145 gSY5320-5YZ-C8F-Q 150 gSY5420-5YZ-C8F-Q 150 gSY5520-5YZ-C8F-Q 150 gSY5120-5WAOu-C8F-Q 107 gSY5220-5WAOu-C8F-Q 153 gSY5320-5WAOu-C8F-Q 158 gSY5420-5WAOu-C8F-Q 158 gSY5520-5WAOu-C8F-Q 158 g
SY5120-5LOu-01F-Q 72 gSY5220-5LOu-01F-Q 93 gSY5320-5LOu-01F-Q 98 gSY5420-5LOu-01F-Q 98 gSY5520-5LOu-01F-Q 98 gSY5120-5YZ-01F-Q 93 gSY5220-5YZ-01F-Q 135 gSY5320-5YZ-01F-Q 140 gSY5420-5YZ-01F-Q 140 gSY5520-5YZ-01F-Q 140 gSY5120-5WAOu-01F-Q 97 gSY5220-5WAOu-01F-Q 143 gSY5320-5WAOu-01F-Q 148 gSY5420-5WAOu-01F-Q 148 gSY5520-5WAOu-01F-Q 148 g
G1/4
SS5Y5-20-02-00F-Q 2 136 gSS5Y5-20-04-00F-Q 4 208 gSS5Y5-20-06-00F-Q 6 280 gSS5Y5-20-08-00F-Q 8 352 gSS5Y5-20-10-00F-Q 10 424 gSS5Y5-20-12-00F-Q 12 496 g
SY5000-26-1A-Q
SY5000-9-1 Rc1/4
SX5000-16-1A
SX5000-16-2A
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy5000 – solenoid valveMedium Air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)
Operating temperature up to 50 °CVoltage/power 24 VDC ±10% (other voltages on request)/0.4 W
Flow Enclosure Standard: IP50 (IP65 with M8 or DIn connector)
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard
■ Compact: 15 mm ■ High flow: 500 ln/min
Valve – individual or manifold assembly, 24 VDCConnection Ø6, supply and exhaust ports G1/8
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø8, supply and exhaust ports G1/8
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – individual or manifold assembly, 24 VDCConnection G1/8, all ports
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
For separate pilot supply (-X20), contact SMC.
Manifold plate
Manifold plate – type 20
Part number Stations Weight
Blanking plate – with screws and gasket
Part number
Blanking plug – for P-, R-channel
Part number Connection
Bracket – for individual valve (side bracket)
Part number
Bracket – for individual valve (foot bracket)
Part number
For individual or manifold assembly
4
73■
SY5140-5LOu-Q 61 gSY5240-5LOu-Q 81 gSY5340-5LOu-Q 87 gSY5440-5LOu-Q 87 gSY5540-5LOu-Q 87 gSY5140-5YZ-Q 82 gSY5240-5YZ-Q 123 gSY5340-5YZ-Q 129 gSY5440-5YZ-Q 129 gSY5540-5YZ-Q 129 gSY5140-5WAOu-Q 65 gSY5240-5WAOu-Q 89 gSY5340-5WAOu-Q 95 gSY5440-5WAOu-Q 95 gSY5540-5WAOu-Q 95 g
SS5Y5-41-02-01F-Q 2 223 gSS5Y5-41-04-01F-Q 4 345 gSS5Y5-41-06-01F-Q 6 467 gSS5Y5-41-08-01F-Q 8 589 gSS5Y5-41-10-01F-Q 10 711 gSS5Y5-41-12-01F-Q 12 833 g
SS5Y5-41-02-C8F-Q 2 223 gSS5Y5-41-04-C8F-Q 4 345 gSS5Y5-41-06-C8F-Q 6 467 gSS5Y5-41-08-C8F-Q 8 589 gSS5Y5-41-10-C8F-Q 10 711 gSS5Y5-41-12-C8F-Q 12 833 g
G1/4
SY5000-6A-C6 SY5000-6A-C8 SY5000-6A-01F G1/8
SY5000-38-1A-Q R1/8
SY5000-39-1A-Q R1/8
SY5000-38-16FA-Q R1/8
SY5000-39-16FA-Q R1/8
SY114-5LOu-Q 24 VDC
V111-5LOu 24 VDCV111-5WOu 24 VDC
KQ2P-04 4KQ2P-06 6KQ2P-08 8KQ2P-10 10
SY100-30-4A-6 600 mmSY100-30-4A-30 3000 mm
SY100-68-A-6 600 mmSY100-68-A-30 3000 mm
WX-83S-6 600 mmWX-83S-20 2000 mm
SY5000-26-2A-Q
SY5000-9-1 Rc1/4
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Valve – plate assembly, 24 VDC
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable 5/3 closed center5/3 exhausted center5/3 pressurized center
Sub plate – type 41Connection G1/8
Part number Stations Weight
Connection Ø8
Part number Stations Weight
up to 20 stations. Different dimensions of cylinder connections can be mixed on type 45-plate. Contact SMC.
Sy5000 – solenoid valve
Sub plate
Connection kit – for SY5000, A-, B-port on valve type 20
Part number ConnectionTubing Ø6 mmTubing Ø8 mm
Individual P-supply – for valve on manifold plate type 20, with screws and gasket
Part number Connection
Individual r-exhaust – for valve on manifold plate type 20, with screws and gasket
Part number Connection
Individual P-supply – for valve on sub plate type 41, with screws and gasket
Part number Connection
Individual r-exhaust – valve on sub plate type 41, with screws and gasket
Part number Connection
Pilot valve – spare part for valve with orange manual override button, old type
Part number Type VoltageStandard (LOu)
Pilot valve – spare part for valve with blue (and yellow) manual override button, new type
Part number Type VoltageStandard (LOu)M8 connector (WOu)
Plug – for unused cylinder ports
Part number Plug diameter
Connector – standard IP50 with cable
Part number Cable length
Connector – covered IP50 with cable
Part number Cable length
Connector – for M8 connection
Part number Cable length
For more cable types, see chapter 5.
Blanking plate – with screws and gasket
Part number
Blanking plug – for P-, R-channel
Part number Connection
New SY – blue manual override button
Old SY – orange manual override button
1 not used3 –+ (minus or plus)4 +– (plus or minus)
Wiring for M8 (WAOU)
1 3
4
4
74 ■
5 µm0.7 MPa (7 bar)
SY7120/7220: 882 ln/min; SY7320/7420: 650 ln/min
SY7120-5YZ-C8F-Q 131 gSY7220-5YZ-C8F-Q 174 gSY7320-5YZ-C8F-Q 182 gSY7420-5YZ-C8F-Q 182 gSY7520-5YZ-C8F-Q 182 g
SY7120-5WAOu-C8F-Q 135 gSY7220-5WAOu-C8F-Q 182 gSY7320-5WAOu-C8F-Q 190 gSY7420-5WAOu-C8F-Q 190 gSY7520-5WAOu-C8F-Q 190 g
SY7120-5YZ-C10F-Q 126 gSY7220-5YZ-C10F-Q 169 gSY7320-5YZ-C10F-Q 177 gSY7420-5YZ-C10F-Q 177 gSY7520-5YZ-C10F-Q 177 g
SY7120-5WAOu-C10F-Q 130 gSY7220-5WAOu-C10F-Q 177 gSY7320-5WAOu-C10F-Q 185 gSY7420-5WAOu-C10F-Q 185 gSY7520-5WAOu-C10F-Q 185 g
SY7120-5YZ-02F-Q 125 gSY7220-5YZ-02F-Q 167 gSY7320-5YZ-02F-Q 175 gSY7420-5YZ-02F-Q 175 gSY7520-5YZ-02F-Q 175 g
SY7120-5WAOu-02F-Q 129 gSY7220-5WAOu-02F-Q 175 gSY7320-5WAOu-02F-Q 183 gSY7420-5WAOu-02F-Q 183 gSY7520-5WAOu-02F-Q 183 g
SX7000-16-1A
G1/4
SS5Y7-20-02-00F-Q 2 150 gSS5Y7-20-04-00F-Q 4 236 gSS5Y7-20-06-00F-Q 6 322 gSS5Y7-20-08-00F-Q 8 408 gSS5Y7-20-10-00F-Q 10 494 gSS5Y7-20-12-00F-Q 12 580 g
SY7000-26-1A-Q
SX7000-16-2A
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy7000 – solenoid valveMedium Air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)
Operating temperature up to 50 °CVoltage/power 24 VDC ±10% (other voltages on request)/0.45 W
FlowEnclosure Standard: IP65 with DIn or M8 connector
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard
■ Compact: 18 mm ■ High flow: 900 ln/min ■ DIn connector included in valve
Valve – individual assembly, 24 VDCConnection Ø81, DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø81, M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø101, DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø101, M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection G1/41, DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection G1/41, M8 connector (IP65)
Part number Type Weight5/2 monostable5/2 bi stable 5/3 closed center5/3 exhausted center5/3 pressurized center
1. Note! Exhaust ports = G1/8, supply port 1 (P) = G1/4.
For separate pilot supply (-X20), contact SMC.
Bracket – for individual valve (side bracket)
Part number
Manifold plate
Manifold plate – type 20
Part number Stations Weight
Blanking plate – with screws and gasket
Part number
Bracket – for individual valve (foot bracket)
Part number
For individual assembly
4
75■
SY7140-5YZ-Q 113 gSY7240-5YZ-Q 155 gSY7340-5YZ-Q 158 gSY7440-5YZ-Q 158 gSY7540-5YZ-Q 158 gSY7140-5WOu-Q 96 gSY7240-5WOu-Q 121 gSY7340-5WOu-Q 124 gSY7440-5WOu-Q 124 gSY7540-5WOu-Q 124 g
SS5Y7-42-02-02F-Q 2 351 gSS5Y7-42-04-02F-Q 4 551 gSS5Y7-42-06-02F-Q 6 751 gSS5Y7-42-08-02F-Q 8 951 gSS5Y7-42-10-02F-Q 10 1151 gSS5Y7-42-12-02F-Q 12 1351 g
SY7000-26-22A-Q
SY5000-9-1 Rc1/4
SY7000-6A-C8 SY7000-6A-C10 SY7000-6A-02F G1/4
SY7000-38-1FA-Q R1/4
SY7000-39-1FA-Q R1/4
SY7000-38-16FA-Q G1/4
SY7000-39-16FA-Q G1/4
SY115-5YZ-Q 24 VDC
V111-5WOu 24 VDCV115-5YZ 24 VDC
KQ2P-04 4 mmKQ2P-06 6 mmKQ2P-08 8 mmKQ2P-10 10 mm
K41K43
WX-83S-6 600 mmWX-83S-20 2000 mm
G1/4
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Valve – plate assembly, 24 VDC
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Supplied complete with connector, LED and surge voltage suppressor.
Sub plate – type 42, connection G1/4
Part number Stations Weight
up to 20 stations.
Blanking plate – with screws and gasket
Part number
Blanking plug – for P, R connection
Part number Connection
Connection kit – for SY7000
Part number ConnectionTubing Ø8 mmTubing Ø10 mm
Individual P-supply – for valve on manifold plate type 20, with screws and gasket
Part number Connection
Individual r-exhaust – for valve on manifold plate type 20, with screws and gasket
Part number Connection
Individual P-supply – for valve on sub plate type 42, with screws and gasket
Part number Connection
Individual r-exhaust – for valve on sub plate type 42, with screws and gasket
Part number Connection
Pilot valve – spare part for valve with orange manual override button, old type
Part number Type VoltageDIn connector (YZ)
Pilot valve – spare part for valve with blue (and yellow) manual override button, new type
Part number Type VoltageM8 connector (WOu)DIn connector (YZ)
Plug – for unused cylinder ports
Part number Plug diameter
Connector – spare part, DIn43650C
Part number TypeStandard (YZ)LED + surge voltage suppressor, 24 VDC (YZ)
Connector – for M8 connection
Part number Cable length
For more cable types, see chapter 5.
Sy7000 – solenoid valve
New SY – blue manual override button
Old SY – orange manual override button
Sub plate
1 not used3 –+ (minus or plus)4 +– (plus or minus)
Wiring for M8 (WAOU)
1 3
4
4
76 ■
G3/8
5 µm0.7 MPa (7 bar)
1700 ln/min
SY9120-5YZ-C12F-Q 289 gSY9220-5YZ-C12F-Q 332 gSY9320-5YZ-C12F-Q 356 gSY9420-5YZ-C12F-Q 356 gSY9520-5YZ-C12F-Q 356 g
SY9120-5WAOu-C12F-Q 293 gSY9220-5WAOu-C12F-Q 340 gSY9320-5WAOu-C12F-Q 364 gSY9420-5WAOu-C12F-Q 364 gSY9520-5WAOu-C12F-Q 364 g
SY9120-5YZ-03F-Q 260 gSY9220-5YZ-03F-Q 303 gSY9320-5YZ-03F-Q 327 gSY9420-5YZ-03F-Q 327 gSY9520-5YZ-03F-Q 327 g
SY9120-5WAOu-03F-Q 264 gSY9220-5WAOu-03F-Q 311 gSY9320-5WAOu-03F-Q 335 gSY9420-5WAOu-03F-Q 335 gSY9520-5WAOu-03F-Q 335 g
SS5Y9-23-02-00F-Q 2SS5Y9-23-04-00F-Q 4SS5Y9-23-06-00F-Q 6SS5Y9-23-08-00F-Q 8SS5Y9-23-10-00F-Q 10SS5Y9-23-12-00F-Q 12SS5Y9-23-14-00F-Q 14SS5Y9-23-16-00F-Q 16
SY9000-26-1A-Q
SY9000-GS-1
SY9000-6A-C8 SY9000-6A-C10 SY9000-6A-C12 SY9000-6A-03F G3/8
SY9000-39-1FA
SY9000-38-1FA-Q
SY9000-61-2A
SY9000-50-1A
SY9000-23-
SY9000-25-1
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Manifold plate, type 23
Sy9000 – solenoid valveMedium Air, lubricated or not lubricated (dry)
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.10 MPa (1.0 bar); 5/3 with center position: 0.20 MPa (2.0 bar)
Operating temperature up to 50 °CVoltage/power 24 VDC ±10% (other voltages on request)/0.45 W
FlowEnclosure Standard: IP65 with DIn or M8 connector
Manual override Standard: non-lockable (lockable on request)LeD, surge voltage suppressor Standard
■ Expandable ALu manifold ■ Replaces VF5000
Valve – individual or manifold assembly type 23Connection Ø121, DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection Ø121, M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
1. Note! Supply and exhaust ports (1, 3, 5) = G1/4.
Valve – individual or manifold assembly type 23Connection G3/81, DIn connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Connection G3/81, M8 connector (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
1. Note! Supply and exhaust ports (1, 3, 5) = G1/4.
Manifold plate – type 23, expandable
Part number Stations
Blanking plate – with screws and gasket
Part number
Valve mounting kit – with screws and gasket
Part number
Connection kit – for SY9000
Part number ConnectionTubing Ø8 mmTubing Ø10 mmTubing Ø12 mm
Individual r-exhaust – for valve on manifold plate type 23, with screws and gasket
Part number
Individual P-supply – for valve on manifold plate type 23, with screws and gasket
Part number
P- or r-blocking disc – for pressure or exhaust zoning
Part number
Station expansion part – for expanding manifold plate
Part number
Note! new tensile bolts required.
Tensile bolt – for assembling manifold plate
Part number
= number of valve stations
nut – for tensile bolt
Part number
For individual or manifold assembly
4
77■
SY9140-5YZ-Q 196 gSY9240-5YZ-Q 239 gSY9340-5YZ-Q 263 gSY9440-5YZ-Q 263 gSY9540-5YZ-Q 262 g
SY9140-5WOu-Q 179 gSY9240-5WOu-Q 205 gSY9340-5WOu-Q 229 gSY9440-5WOu-Q 229 gSY9540-5WOu-Q 229 g
SS5y9-43- -
02 20
D05
uDB
rS
rS
C12 -
D
D0
RcF Gn nPTT nPTF
02 1/4"03 3/8"C8
C10 C12 M
-Q
SY9000-26-2A-Q
SY9000-GS-2
SY9000-39-2FA-Q
SY9000-38-2FA-Q
SY9000-57-1A
SY9000-18-2
SY9000-50-2A-C8 8 mmSY9000-50-2A-C10 10 mmSY9000-50-2A-C12 12 mmSY9000-50-2A-02F G1/4SY9000-50-2A-03F G3/8
SY9000-23-
SY9000-25-1
SY9000-30-1A
VVQ4000-50B-C8 8 mmVVQ4000-50B-C10 10 mmVVQ4000-50B-C12 12 mm
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Valve – sub plate assembly type 43With DIn connector
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With M8 connection (IP65)
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Sy9000 – solenoid valve
Part number: sub plate – type 43, expandable
No of valve stations
2 stations 20 stations
P/r port output
u-sideFor 2–10 stations
D-sideBåda For 2–20 stations
Supply/exhaust
Internal pilot (standard)External pilotInternal pilot with built-in silencerExternal pilot with built-in silencer
Options
Direct mountingMounted on DIn railFor mounting on DIn rail
ThreadA/B port size
Push-in, Ø8 mmPush-in, Ø10 mmPush-in, Ø12 mmMixed
Blanking plate – with screws and gasket
Part number
Valve mounting kit – with screws and gasket
Part number
Individual r-exhaust – for valve on sub plate type 43, with screws and gasket
Part number
Individual P-supply – for valve on sub plate type 43, with screws and gasket
Part number
P- or r-blocking disc – for pressure or exhaust zoning
Part number
Valve mounting screw – M3 × 42, nickel plated
Part number
Station expansion part – for expanding sub plate, A/B connection
Part number Connection
Note! new tensile bolts required
Tensile bolt – for assembling sub plate
Part number = number of valve stations
nut – for tensile bolt
Part number
DIn rail mountPart number
Push-in fittingPart number Connection
Sub plate, type 43
1 (P) + 3/5 (R) connectionsØ12 mm
4
78 ■
SY9000-58A-02F G1/4SY9000-58A-03F G3/8
SY9000-62-1A
V111-5LOu 24 VDCV111-5WOu 24 VDCV115-5YZ 24 VDC
SY114-5LOu-Q 24 VDCSY115-5YZ-Q 24 VDC
K41K43
WX-83S-6WX-83S-20
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy9000 – solenoid valve
Port block – with female thread for sub plate type 43
Part number Connection
Blanking plug – for P, R connection
Part number
Pilot valve – spare part for valve with blue (and yellow) manual override button, new type
Part number Type VoltageStandard (LOu)M8 connector (WOu)DIn connector (YZ)
Pilot valve – spare part for valve with orange manual override button, old type
Part number Type VoltageStandard (LOu)DIn connector (YZ)
Connector – spare part, DIn43650C
Part number TypeStandard (YZ)LED + surge voltage suppressor, 24 VDC (YZ)
Connector – for M8 connection
Part number TypeFor M8 connection with 0.6 m cableFor M8 connection with 2 m cable
For more cable types, see chapter 5.
New SY – blue manual override button
Old SY – orange manual override button
1 not used3 –+ (minus or plus)4 +– (plus or minus)
Wiring for M8 (WAOU)
1 3
4
4
79■
10 µm1 MPa (10 bar)
VF3000: 750–870 ln/min; VF5000: 2450 ln/minIP65
VF3130K-5YOD1-02F 214 gVF3230K-5YOD1-02F 311 gVF3330K-5YOD1-02F 328 gVF3430K-5YOD1-02F 328 gVF3530K-5YOD1-02F 328 g
VV5F3-30-021-00F 2VV5F3-30-041-00F 4VV5F3-30-061-00F 6VV5F3-30-081-00F 8
DXT031-38-5A
V212K-5 24 VDCV212K-4 220 VAC
VF5120K-5YOD1-03F 335 gVF5220K-5YOD1-03F 426 gVF5320K-5YOD1-03F 463 gVF5420K-5YOD1-03F 463 gVF5520K-5YOD1-03F 463 g
VF5120K-5YOE1-03F 335 gVF5220K-5YOE1-03F 426 gVF5320K-5YOE1-03F 463 g
VV5F5-20-021-00F 2VV5F5-20-041-00F 4VV5F5-20-061-00F 6VV5F5-20-081-00F 8
VF5000-70-2A
V212K-5 24 VDCV212K-4 220 VAC
X31X32X30
VF3140K-5YOD1 228 gVF3240K-5YOD1 324 gVF3340K-5YOD1 342 gVF3440K-5YOD1 342 g
VV5F3-40-022-02F 2VV5F3-40-042-02F 4VV5F3-40-062-02F 6VV5F3-40-082-02F 8
X31X32X30
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
VF3000 & -5000 – solenoid valveMedium Air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.15 MPa (1.5 bar)
Operating temperature –10 to 50 °C
Voltage/power 24 VDC –15 to +10% (other voltages on request)/1.5 W
FlowEnclosure
Manual override LockableLeD, surge voltage suppressor See connectors
■ Robust design ■ G1/4 ≈ 1000 ln/min ■ G3/8 ≈ 2500 ln/min
Valve VF3000 – individual assembly, ports on valve, G1/4, 24 VDC
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
For 220 VAC, replace 5YOD1 with 4YOD1. Example: VF3130K-4yOD1-02F.
Manifold plate – for VF3000
Part number number of stations
Blanking plate – with screws and gaskets
Part number
Pilot valve – spare part
Part number Type
Valve VF5000 – individual assembly, ports on valve, G3/8, 24 VDC
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With push/turn manual override
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center
For 220 VAC, replace 5YOD/E1 with 4YOD/E1. Example: VF5520K-4yOD1-03F.
Manifold plate – for VF5000
Part number number of stations
Blanking plate – with screws and gaskets
Part number
Pilot valve – spare part
Part number Type
ConnectorPart number Type
StandardLED + surge voltage suppressor, 24 VDCLight + surge voltage suppressor, 220 VAC
Note! Connector ordered separately.
Valve VF3000 – for plate assembly, ports in plate, 24 VDC
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center
For 220 VAC, replace 5YOD1 with 4YOD1. Example: VF3140K-4yOD1.
Sub plate – for VF3000, cylinder port G1/4
Part number number of stations
ConnectorPart number Type
StandardLED + surge voltage suppressor, 24 VDCLight + surge voltage suppressor, 220 VAC
Note! Connector ordered separately.
Ports on valve
Ports in plate
4
80 ■
5 µm0.7 MPa (7 bar)
170 ln/min
➊
SY3160-5LOu-C6-Q 51 gSY3260-5LOu-C6-Q 73 gSY3360-5LOu-C6-Q 76 gSY3460-5LOu-C6-Q 76 gSY3560-5LOu-C6-Q 76 g
➊
SY3160-5WAOu-C6-Q 55 gSY3260-5WAOu-C6-Q 81 gSY3360-5WAOu-C6-Q 84 gSY3460-5WAOu-C6-Q 84 gSY3560-5WAOu-C6-Q 84 g
➋
SY3000-55-1A-Q Ø8 mm
➌➍
SY3000-56-1A-QSY3000-56-1B-Q
➎
SY3000-52-5A
SS5Y3-60-02D-Q 2 110 gSS5Y3-60-04D-Q 4 170 gSS5Y3-60-06D-Q 6 230 gSS5Y3-60-08D-Q 8 290 gSS5Y3-60-10D-Q 10 350 gSS5Y3-60-12B-Q 12 410 g
SY3000-52-6A
SY3000-6A-M5 M5SY3000-6A-C4 Ø4 mmSY3000-6A-C6 Ø6 mm
SY100-30-4ASY100-30-4A-6SY100-30-4A-10SY100-30-4A-15SY100-30-4A-20SY100-30-4A-25SY100-30-4A-30SY100-30-4A-50SY100-68-A-6SY100-68-A-30V100-49-1-1V100-49-1-2V100-49-1-3V100-49-1-4V100-49-1-5
SY114-5LOu-QV111-5LOu
V111-5WAOu
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy3060 – valve manifold, cassette typeMedium Compressed air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)
Operating temperature up to 50 °C
Voltage/power Standard: 24 VDC ±10% (other voltages on request)/0.4 W (low power: 0.1 W)
FlowEnclosure IP50 or IP65 (M8 connector)
Manual override Standard: lockable (push)LeD, surge voltage suppressor Standard
■ Compact, low weight ■ Extremely simple and flexible ■ Few parts to stock
D-side
u-side
Valve – cassette type, 24 VDC, connection Ø6 mm, IP50
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – M8 connector, 24 VDC, connection Ø6 mm, IP65
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Also available with M5 thread and connection Ø4 mm.
Supply and exhaust blockPart number Connection
Includes gaskets SY3000-52-5A.
End plates, D- and u-sidePart number Description
End plate, D-sideEnd plate, u-side
Gaskets – 3 st
Part number
Manifold assembly kit – includes supply and exhaust block, end plates and DIn rail
Part number Stations Weight
Plug kitPart number Description
Plugs for channel 1, 3 and 5
Connection kit – A and B port
Part number Connection
ConnectorPart number Description
0.3 m cable0.6 m cable1 m cable1.5 m cable2 m cable2.5 m cable3 m cable5 m cable0.6 m cable, covered, IP50 enclosure3 m cable, covered, IP50 enclosureM8, 0.3 m cableM8, 0.5 m cableM8, 1 m cableM8, 2 m cableM8, 5 m cable
Pilot valve – 24 VDC
Part number DescriptionFor valve with orange manual override buttonFor valve with blue manual override buttonM8 connector, for valve with blue manual over-ride button
➌➋
➊
➎➋
➍
4
81■
5 µm0.7 MPa (7 bar)
450 ln/min
➊
SY5160-5LOu-C6-Q 88 gSY5260-5LOu-C6-Q 111 gSY5360-5LOu-C6-Q 117 gSY5460-5LOu-C6-Q 117 gSY5560-5LOu-C6-Q 117 g
➊
SY5160-5LOu-C8-Q 80 gSY5260-5LOu-C8-Q 103 gSY5360-5LOu-C8-Q 109 gSY5460-5LOu-C8-Q 109 gSY5560-5LOu-C8-Q 109 g
➊
SY5160-5DZ-01F-Q 90 gSY5260-5DZ-01F-Q 136 gSY5360-5DZ-01F-Q 142 gSY5460-5DZ-01F-Q 142 gSY5560-5DZ-01F-Q 142 g
➊
SY5160-5WAOu-01F-Q 71 gSY5260-5WAOu-01F-Q 102 gSY5360-5WAOu-01F-Q 108 gSY5460-5WAOu-01F-Q 108 gSY5560-5WAOu-01F-Q 108 g
➋
SY5000-55-1A-Q Ø10 mm
➌➍
SY5000-56-1A-QSY5000-56-1B-Q
➎
SY5000-52-3A
SS5Y5-60-02D-Q 2 141 gSS5Y5-60-04D-Q 4 145 gSS5Y5-60-06D-Q 6 150 gSS5Y5-60-08D-Q 8 154 gSS5Y5-60-10D-Q 10 159 gSS5Y5-60-12B-Q 12 163 g
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy5060 – valve manifold, cassette typeMedium Compressed air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)
Operating temperature up to 50 °C
Voltage/power Standard: 24 VDC ±10% (other voltages on request)/0.4 W (low power: 0.1 W)
Flow
Enclosure Standard: IP65 (IP50 on request)
Manual override Standard: lockable (push)LeD, surge voltage suppressor Standard
■ Compact, low weight ■ Extremely simple and flexible ■ Few parts to stock
Valve – cassette type, 24 VDC, connection Ø6 mm, IP65
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – cassette type, 24 VDC, connection Ø8 mm, IP65
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – DIn connector, 24 VDC, connection G1/8, IP65
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – M8 connector, 24 VDC, connection G1/8, IP65
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Supply and exhaust blockPart number Connection
Includes gaskets SY5000-52-3A.
End plates, D- and u-sidePart number Description
End plate, D-sideEnd plate, u-side
Gaskets – 3 st
Part number
Manifold assembly kit – includes supply and exhaust block, end plates and DIn rail
Part number Stations Weight
D-side
u-side
➌➋
➊
➎➋
➍
4
82 ■
SY5000-52-4A
SY5000-6A-C6 Ø6 mmSY5000-6A-C8 Ø8 mmSY5000-6A-01F G1/8
SY100-30-4ASY100-30-4A-6SY100-30-4A-10SY100-30-4A-15SY100-30-4A-20SY100-30-4A-25SY100-30-4A-30SY100-30-4A-50SY100-68-A-6SY100-68-A-30SY100-61-3-05V100-49-1-1V100-49-1-2V100-49-1-3V100-49-1-4V100-49-1-5
SY114-5LOu-QV111-5LOu
V115-5DZ
V111-5WAOu
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Plug kitPart number Description
Plugs for channel 1, 3 and 5
Connection kit – A and B port
Part number Connection
Sy5060 – valve manifold, cassette type
ConnectorPart number Description
0.3 m cable0.6 m cable1 m cable1.5 m cable2 m cable2.5 m cable3 m cable5 m cable0.6 m cable, covered, IP50 enclosure3 m cable, covered, IP50 enclosureDIn connector, 24 VDCM8, 0.3 m cableM8, 0.5 m cableM8, 1 m cableM8, 2 m cableM8, 5 m cable
Pilot valve – 24 VDC
Part number DescriptionFor valve with orange manual override buttonFor valve with blue manual override buttonDIn connector, for valve with blue manual over-ride buttonM8 connector, for valve with blue manual over-ride button
4
83■
5 µm0.7 MPa (7 bar)
980 ln/min
➊
SY7160-5DZ-02F-Q 126 gSY7260-5DZ-02F-Q 170 gSY7360-5DZ-02F-Q 178 gSY7460-5DZ-02F-Q 178 gSY7560-5DZ-02F-Q 178 g
➊
SY7160-5DZ-C10-Q 146 gSY7260-5DZ-C10-Q 191 gSY7360-5DZ-C10-Q 199 gSY7460-5DZ-C10-Q 199 gSY7560-5DZ-C10-Q 199 g
➊
SY7160-5WAOu-02F-Q 129 gSY7260-5WAOu-02F-Q 157 gSY7360-5WAOu-02F-Q 165 gSY7460-5WAOu-02F-Q 165 gSY7560-5WAOu-02F-Q 165 g
➋
SY7000-75-1A-Q Ø10 mm
➌➍
SY7000-56-1A-QSY7000-56-1B-Q
➎
SY7000-70-1A
SS5Y7-60-02D-Q 2 225 gSS5Y7-60-04D-Q 4 231 gSS5Y7-60-06D-Q 6 237 gSS5Y7-60-08D-Q 8 244 gSS5Y7-60-10D-Q 10 250 gSS5Y7-60-12B-Q 12 256 g
SY7000-70-2A
SY7000-6A-C8 Ø8 mmSY7000-6A-C10 Ø10 mmSY7000-6A-02F G1/4
SY100-61-3-05V100-49-1-1V100-49-1-2V100-49-1-3V100-49-1-4V100-49-1-5
V115-5DZ
V111-5WAOu
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sy7060 – valve manifold, cassette typeMedium Compressed air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)
Operating temperature up to 50 °C
Voltage Standard: 24 VDC ±10% (other voltages on request)/0.4 W (low power: 0.1 W)
Flow
Enclosure Standard: IP65 (IP50 on request)
Manual override Standard: lockable (push)LeD, surge voltage suppressor Standard
■ Compact, low weight ■ Extremely simple and flexible ■ Few parts to stock
Valve – DIn connector, 24 VDC, connection G1/4, IP65
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – DIn connector, 24 VDC, connection Ø10 mm, IP65
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve – M8 connector, 24 VDC, connection G1/4, IP65
Part number Type Weight5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Supply and exhaust blockPart number Connection
Includes gaskets SY7000-70-1A.
End plates, D- and u-sidePart number Description
End plate, D-sideEnd plate, u-side
Gaskets – 3 st
Part number
Manifold assembly kit – includes supply and exhaust block, end plates and DIn rail
Part number Stations Weight
Plug kitPart number Description
Plugs for channel 1, 3 and 5
Connection kit – A and B port
Part number Connection
ConnectorPart number Description
DIn connector, 24 VDCM8, 0.3 m cableM8, 0.5 m cableM8, 1 m cableM8, 2 m cableM8, 5 m cable
Pilot valve – 24 VDC
Part number DescriptionDIn connector, for valve with blue manual override buttonM8 connector, for valve with blue manual override button
D-side
u-side
➌➋
➊
➎➋
➍
4
84 ■
5 µm0.7MPa (7bar)
Sj2000: 80 ln/min; Sj3000: 120 ln/minIP50
Sj2160-5Cu-C4Sj2260-5Cu-C4Sj2360-5Cu-C4Sj2460-5Cu-C4Sj2560-5Cu-C4Sj2A60-5Cu-C4 5/4, 2 × 3/2, nC nCSj2B60-5Cu-C4 5/4, 2 × 3/2, nO nOSj2C60-5Cu-C4 5/4, 2 × 3/2, nC nO
Sj2160-5MOZ-C4Sj2260-5MOZ-C4Sj2360-5MOZ-C4Sj2460-5MOZ-C4Sj2560-5MOZ-C4Sj2A60-5MOZ-C4 5/4, 2 × 3/2, nC nCSj2B60-5MOZ-C4 5/4, 2 × 3/2, nO nOSj2C60-5MOZ-C4 5/4, 2 × 3/2, nC nO
Sj3160-5Cu-C6Sj3260-5Cu-C6Sj3360-5Cu-C6Sj3460-5Cu-C6Sj3560-5Cu-C6Sj3A60-5Cu-C6 5/4, 2 × 3/2, nC nCSj3B60-5Cu-C6 5/4, 2 × 3/2, nO nOSj3C60-5Cu-C6 5/4, 2 × 3/2, nC nO
Sj3160-5MOZ-C6Sj3260-5MOZ-C6Sj3360-5MOZ-C6Sj3460-5MOZ-C6Sj3560-5MOZ-C6Sj3A60-5MOZ-C6 5/4, 2 × 3/2, nC nCSj3B60-5MOZ-C6 5/4, 2 × 3/2, nO nOSj3C60-5MOZ-C6 5/4, 2 × 3/2, nC nO
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
SJ2000 & -3000 – solenoid valve manifold, plug-in, cassette type
Medium Compressed airDegree of filtration
Max. working pressure
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar)5/2 bi stable: 0.1 MPa (1 bar)5/3 with center position: 0.2 MPa (2 bar)5/4 double 3/2: 0.15 MPa (1.5 bar)
Operating temperature –10 to 50 °C
Voltage/power Standard 24 VDC ±10%; Sj2000: 0.55 W; Sj3000: 0.4 W
FlowEnclosure
Manual override Standard: non-lockable (lockable [push/turn] on request)LeD, surge voltage suppressor LED, diode protection
■ Two valve sizes on same manifold, 7 mm and 10 mm ■ Modern connections between valves (card edge)■ Ideal cost-effective valve system together with fieldbus EX510■ Optional smart features: switch for electrical disconnection of valve; pressure regulator module; valve unit for vacuum/ejection
Valve SJ2000 – plug-in, 24 VDC
Part number Type5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With individual electrical connection
Part number Type5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Valve SJ3000 – plug-in, 24 VDC
Part number Type5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
With individual electrical connection
Part number Type5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center
Since Sj is a new valve series, additional stocking may occur. Contact SMC for current stock status.
4
85■
SS5j2-60FD1-02DSS5j2-60FD1-04DSS5j2-60FD1-06DSS5j2-60FD1-08DSS5j2-60FD1-10DSS5j2-60FD1-12B
SS5j3-60FD1-02DSS5j3-60FD1-04DSS5j3-60FD1-06BSS5j3-60FD1-08BSS5j3-60FD1-10BSS5j3-60FD1-12B
SS5j2-60S6BnD-02DSS5j2-60S6BnD-04DSS5j2-60S6BnD-06BSS5j2-60S6BnD-08BSS5j2-60S6BnD-10BSS5j2-60S6BnD-12B
SS5j3-60S6BnD-02DSS5j3-60S6BnD-04DSS5j3-60S6BnD-06BSS5j3-60S6BnD-08BSS5j3-60S6BnD-10BSS5j3-60S6BnD-12B
Sj3000-50-1A-C8
Sj3000-50-1AS-C8
Sj3000-50-1AR-C8
Sj3000-50-1ARS-C8
Sj3000-53-1ASj3000-42-1A-1
Sj3000-42-3A-2
Sj3000-53-2ASj3000-44-1A
Sj3000-155-1A
Sj3000-49-1ASj3000-49-2A
Sj3000-00-P
Sj3000-00-P-H
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Valve manifold – Sj2000, D-sub connector
Part number Type 2 valve stations 4 valve stations 6 valve stations 8 valve stations10 valve stations12 valve stations
Valve manifold – Sj30001, D-sub connector
Part number Type 2 valve stations 4 valve stations 6 valve stations 8 valve stations10 valve stations12 valve stations
1. For mix of Sj2000 and -3000, add “M” in the part number. Example: SS5j3-M60-FD1-02D.
Valve manifold – Sj2000, for fieldbus EX510
Part number Type 2 valve stations 4 valve stations 6 valve stations 8 valve stations10 valve stations12 valve stations
Valve manifold – Sj30001, for fieldbus EX510
Part number Type 2 valve stations 4 valve stations 6 valve stations 8 valve stations10 valve stations12 valve stations
1. For mix of Sj2000 and -3000, add “M” in the part number. Example: SS5j3-M60S6BnD-02D.
SJ2000 & -3000 – solenoid valve manifold, plug-in, cassette type
Valve manifold accessoriesPart number Type
Supply/exhaust block, internal pilotSupply/exhaust block, internal pilot, built-in silencerSupply/exhaust block, external pilotSupply/exhaust block, external pilot, built-in silencerEnd plate for u-sidePower supply block, D-sub, D-sidePower supply block, 20-pin flat cable for EX510, D-sideEnd plate, PC wiring, D-sideBlocking disc, exhaustLabels for indication of supply/exhaust blockBlanking plate for single solenoidBlanking plate for double solenoidPressure regulator block with top-mounted pressure gauge, adjust with screwdriverPressure regulator block with top-mounted pressure gauge, knob for adjusting
Since Sj is a new valve series, additional stocking may occur. Contact SMC for current stock status.
4
86 ■
5 µm0.7 MPa (7 bar)
VQC1101n-51 250 ln/min 67 gVQC1100n-51 180 ln/min 67 gVQC1201n-51 250 ln/min 77 gVQC1200n-51 180 ln/min 77 gVQC1301n-51 180 ln/min 77 gVQC1401n-51 250 ln/min 77 gVQC1501n-51 180 ln/min 77 gVQC1A01n-51 160 ln/min 77 gVQC1B01n-51 160 ln/min 77 gVQC1C01n-51 160 ln/min 77 g
VVQ1000-50A-
VVQ1000-52A-C8
An200-KM8
VVQ1000-F-L-
VVQ1000-10A-1
KQ2P-
VVQ0000-58A
VV5QC11-02C6SD0 2VV5QC11-04C6SD0 4VV5QC11-06C6SD0 6VV5QC11-08C6SD0 8VV5QC11-10C6SD0 10VV5QC11-12C6SD0 12
VVQC1000-F25-1VVQC1000-P26-1
VVQC1000-M26-1
VVQC1000-T0-1VVQC1000-L25-0-1VVQC1000-L25-1-1VVQC1000-L25-2-1
B C D
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
VQC1000 – solenoid valve, plug-inMedium Air, lubricated or not lubricated (dry)
Degree of filtrationMax. working pressure
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar); metal seal (not double 3/2): 0.1 MPa (1 bar)
Operating temperature up to 50 °C (dry air)
Voltage/power Standard: 24 VDC ±10% (12 VDC on request)/0.4 W
Flow See table below
Enclosure IP67, factory-assembled in japan; otherwise IP65; D-sub or flat cable, IP50
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard
■ unmatched flexibility and easy configuration because of new internal connector technology
Valve – plug-in, 24 VDC
Part number1 Type Flow Weight5/2 mono stable, rubber seal5/2 mono stable, metal seal5/2 bi stable, rubber seal5/2 bi stable, metal seal5/3 closed center, rubber seal5/3 exhausted center, rubber seal5/3 pressurized center, rubber sealDouble 3/2 nC/nC, rubber sealDouble 3/2 nO/nO, rubber sealDouble 3/2 nC/nO, rubber seal
1. For lockable manual override, add B, C or D at end of part number. Example: VQC1101n-51B.
replacement fittingPart number = C3 for Ø3.2 mm; C4 for Ø4 mm; C6 for Ø6 mm.
Parallel fitting – 2 valve stations
Part number
Silencer – for exhaust
Part number
90° connectionPart number = C3 for Ø3.2 mm; C4 for Ø4 mm; C6 for Ø6 mm.
Blanking plate – for unused valve stations
Part number
Blanking plug – in place of unused connections
Part number = 04 for Ø4 mm; 06 for Ø6 mm.
Blanking plug – in place of fitting
Part number
Sub plates – basic type, add electrical connection below
Part number Stations
Additions – for sub plates above
AdditionsBuilt-in silencer (…SD0-S) Manifold 13–24 valve stations/added station1 Separate pilot supply (…SD0-R)/manifold
1. Note! Manifold specification required; contact SMC.
Electrical connections – interface modules
Part number TypeD-sub, 25-pinFlat cable, 26-pinCircular connector, 26-pin (IP67)Terminal box, 20 connections (IP67)Molded cable, 0.6 mMolded cable, 1.5 mMolded cable, 3 m
Fieldbus – EX250, EX260, EX500 and EX600, see chapter 5
Parallel fitting
Manual override versions
4
87■
VVQ1000-P-1-C6
VVQ1000-16A
VVQ1000-R-1-C6
VVQC1000-19A-D-C6VVQC1000-19A-S-C6
VVQ1000-18A
VVQC1000-1A-D-C6VVQC1000-1A-S-C6
VVQ1000-n-
VVQ1000-57A
VVZS3000-21A-2*VVZS3000-21A-3*VVZS3000-21A-4*
AXT100-MC26AXT100-MC26-015AXT100-MC26-030AXT100-MC26-050AXT100-MC26-080
VQC 1 10 -➊
1 0 n 5➋ ➌ ➎ ➏➍
➊12345ABC
➋01
➌
B
Knr
➍5 24 VDC1
6 12 VDC
➎
E
➏
B
C
D
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Individual P-supplyPart number
Blocking disc – supply
Part number
Individual r-exhaustPart number
Blocking disc – exhaust
Part number TypeDouble solenoidSingle solenoid
On VVQC1000, entire plate is replaced.
Check valve – prevents back pressure from R-channel
Part number
Expansion part – standard
Part number TypeFor double solenoidFor single solenoid
name platePart number = number of valve stations.
DIn rail brackets – 1 pair
Part number
D-sub connector – 25-pin, in accordance with MIL-norm (0.3 mm2)
Part number TypeConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
Circular connector – 26-pin (IP67), with cable
Part number TypeConnector onlyConnector with 1.5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
For output modules VQC1000 – electrical accessories, see EX250/-500 fieldbus.
For other versions, contact SMC.For fieldbus components, see chapter 5.
Part number: valve – for valve manifold, see next page
Series VQC1000
Function
5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized centerDouble 3/2 nC/nC1
Double 3/2 nO/nO1
Double 3/2 nC/nO1
1. Only available with rubber seal.
Seal type
Metal sealRubber seal
Options
Standard (0.4 W)Quick response time (12 ms)1
High pressure (1 MPa)2
negative commonExternal pilot3
When more than one option is desired, enter them in alphabetical order.1. 0.95 W2. Only available with metal seal, 0.95 W.3. not available for double 3/2 valve.
rated voltage
1. Fieldbus connection only available for 24 VDC.
LeD/surge voltage suppressor
WithWithout LED, with surge voltage suppressor1
1. not for fieldbus connection.
Manual override
non-locking push type (tool required)Locking for screwdriver (tool required)Locking type (manual)Locking sliding type (manual)
VQC1000 – solenoid valve, plug-in
Individual P-supply
Blocking disc – supply
Name plate
Individual R-exhaust
Blocking disc – exhaust
Valve stations are numbered in ascending order, starting from D-side
D-side U-sideValve stations 1 2 3 4 5 6 7 8
12
34
5
98
76
4
88 ■
➋C3 C4 C6 M5
CM
l3
l4
l6
l5
B3
B4
B6
B5
lM
➊01
➌
FD0FD1FD2FD3PD0PD1PD2PD3
PDC
TD0
lD0lD1lD2MD0MD1MD2MD3
SD0SDA1
SDA2
SD0SDQSDnSDVSDy
SDTA
SDTB
SDTC
SDTD
SDVB
➑
B
D
D
K
nr
S
➎
01 8
➏
123
➐
n nPn (–)
➍EX250 EX500 EX126
Dev
icen
et
Pr
OFI
Bu
S-
DP
CC
-lIn
K
AS
-i
CA
no
pen
Dev
icen
et
Pr
OFI
Bu
S-
DP
CC
-lIn
K
rem
ote
I/O
CC
-lIn
K
+COM — — ✔ — — ✔ ✔ ✔ ✔ ✔n –COM ✔ ✔ — ✔ ✔ ✔ ✔ ✔ ✔ —
VV5QC - 08 B1 1 C6 FD1 F / P T l M/ / /VV5QC - 08 B-1 1 C6 SDQ S
➊ ➋ ➌ ➍ ➎ ➏ ➐ ➑
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Cylinder port size
Push-in, Ø3.2 mmPush-in, Ø4 mmPush-in, Ø6 mmM5 threadMixed sizes or with port plugTop-connected angle with push-in, Ø3.2 mmTop-connected angle with push-in, Ø4 mmTop-connected angle with push-in, Ø6 mmM5 threadBottom-connected angle with push-in, Ø3.2 mmBottom-connected angle with push-in, Ø4 mmBottom-connected angle with push-in, Ø6 mmM5 threadAngle connector, mixed sizes
When selecting CM/LM, enter size in manifold specification sheet.
number of valve stations
1 station
Maximum number of valve stations de-pends on chosen electrical connection. See Electrical connection/cable length.
Electrical connection/cable length
Input D-side Connection/cable length
Valve stations2
F co
nn. D-sub connector (25P) without cable
1 to 12 (24)
D-sub connector (25P) w. 1.5 m cableD-sub connector (25P) w. 3 m cableD-sub connector (25P) w. 5 m cable
P c
onn
.
Flat cable (26P) without cable1 to 12
(24)Flat cable (26P) with 1.5 m cableFlat cable (26P) with 3 m cableFlat cable (26P) with 5 m cable
Flat cable (20P) without cable1 1 to 9 (18)
T c
onn
.
Terminal connection in box 1 to 10 (20)
l co
nn. Cable (25 wire), 0.6 m wire length
1 to 12 (24)Cable (25 wire), 1.5 m wire length
Cable (25 wire), 3 m wire length
M c
onn
. Multipole connector (26P) without cable1 to 12
(24)Multipole connector (26P) with 1.5 m cableMultipole connector (26P) with 3 m cableMultipole connector (26P) with 5 m cable
S c
onn
ecti
on
Distributed fieldbus (EX500)For fieldbus without fieldbus node
1 to 8 (16)
With fieldbus node for Remote I/OWith fieldbus node for Devicenet/ PROFIBuS-DP/CC-LInK
Fieldbus with in- and outputs (EX250)For fieldbus without fieldbus node
1 to 12 (24)
Fieldbus for DevicenetFieldbus for PROFIBuS-DPFieldbus for CC-LInKFieldbus for CAnopenAS-i, 8 in/8 out, 31-slave model, 2 power supplies
1 to 4 (8)
AS-i, 4 in/4 out, 31-slave model, 2 power supplies
1 to 2 (4)
AS-i, 8 in/8 out, 31-slave model, 1 power supply
1 to 4 (8)
AS-i, 4 in/4 out, 31-slave model, 1 power supply
1 to 2 (4)
Fieldbus with outputs (EX126)
Fieldbus for CC-LInK 1 to 8 (16)
1. P connection: Order cables separately for type 20P.2. numbers in paranthesis indicates maximum number of solenoids for configuration w. mixed single-double solenoid connections. Maximum number of valve stations is determined by total number of solenoids. For mixed connections, use option symbol “K”.
Options
noneAll stations with back-pressure check valves1
With DIn rail (rail length: standard)With DIn rail (rail length: special)2
Special wiring (not double wiring)3
With name plateExternal pilot4
Direct exhaust with built-in silencer5
Specify options in alphabetical order. Example: BRS.1. When using backpressure check valves only on neccessary stations, en-ter check valve part number and valve station number in manifold specifica-tion sheet.2. For special DIn rail length, enter D. ( = number of valve stations.) Example: D08. In this case, manifold is mounted on DIn rail for 8 stations, regardless of actual number of stations in manifold. Entered number of stations must be larger than actual number of stations in manifold. Enter D0 for op-tions without DIn rail.3. Ensure that wiring is entered in manifold specification sheet.4. For external pilot option “R”, also enter external pilot option “R” for valves in question.5. Option with built-in silencer does not meet requirement of IP67.
Input block (only entered when
input blocks are used)
Without fieldbus node/input block (SD0)Without input blockWith 1 input block With 8 input blocks
Type of input block (only
entered when input blocks are used)
Without input blockM12, 2 inputsM12, 4 inputsM8, 4 inputs (3 pins)
Polarity, input block (only entered when input blocks
are used)
PnP (+) or without fieldbus node/ input block
Fieldbus polarity
Polarity
Leave box for fieldbus polarity blank for manifold without bus node (SD0).
Part number: valve manifold – for VQC1000 plate assembly/plug-in unit
connection
connection
Series VQC1000
Plate assembly/plug-in
VQC1000 – solenoid valve, plug-in
4
89■
EX
250
EX
260
EX
500
EX
600
EX
126
D-s
ub
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Exploded view VQC1000Electrical connection
and fieldbus End plate, D-side Valve station, base End plate, u-side
S c
onn
ecti
on
(fiel
db
us)
F co
nnec
tio
nP
co
nnec
tio
n
Flat
cab
le
T c
onn
ecti
on
Term
inal
con
n.
l co
nnec
tio
n
Sin
gle
wire
M c
onn
ecti
on
Mul
tipol
e co
nn.
VQC1000 – solenoid valve, plug-in
4
90 ■
5 µm0.7 MPa (7 bar)
I
VV5QC21-02C8SD0 2VV5QC21-04C8SD0 4VV5QC21-06C8SD0 6VV5QC21-08C8SD0 8VV5QC21-10C8SD0 10VV5QC21-12C8SD0 12
VVQC1000-F25-1VVQC1000-P26-1
VVQC1000-M26-1
VVQC1000-T0-1VVQC1000-L25-0-1VVQC1000-L25-1-1VVQC1000-L25-2-1
VVQ1000-51A-
VVQ2000-52A-C10
An200-KM10
VVQ2000-10A-1
KQ2P-
VVQ1000-58A
VVQ2000-P-1-C8
VQC2101n-51 800 ln/min 95 gVQC2100n-51 600 ln/min 105 gVQC2201n-51 800 ln/min 105 gVQC2200n-51 600 ln/min 105 gVQC2301n-51 600 ln/min 105 gVQC2401n-51 800 ln/min 105 gVQC2501n-51 600 ln/min 105 gVQC2A01n-51 460 ln/min 105 gVQC2B01n-51 460 ln/min 105 gVQC2C01n-51 460 ln/min 105 g
B C D
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
VQC2000 – solenoid valve, plug-inMedium Air, lubricated or not lubricated (dry)
Degree of filtrationMax. working pressure
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar); metal seal (not double 3/2): 0.1 MPa (1 bar)
Operating temperature up to 50 °C (dry air)
Voltage/power Standard: 24 VDC ±10% (12 VDC on request)/0.4 W
Flow See table below
Enclosure IP67, factory-assembled in japan; otherwise IP65; D-sub or flat cable, IP50
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard
■ unmatched flexibility and easy configuration because of new internal connector technology
Sub plates – basic type, add electrical connection below.
Part number Stations
Additions – for sub plates above
AdditionsBuilt-in silencer (…SD0-S) Manifold 13–24 valve stations/added station1 Separate pilot supply (…SD0-R)/manifold
1. Note! Manifold specification required; contact SMC.
Electrical connections – interface modules
Part number TypeD-sub, 25-pinFlat cable, 26-pinCircular connector, 26-pin (IP67)Terminal box, 20 connections (IP67)Molded cable, 0.6 mMolded cable, 1.5 mMolded cable, 3 m
Fieldbus – EX250, EX500 and EX600, see chapter 5
replacement fittingPart number = C4 for Ø4 mm; C6 for Ø6 mm; C8 for Ø8 mm.
Parallel fitting – 2 valve stations
Part number
Silencer – for exhaust
Part number
Blanking plate – for unused valve stations
Part number
Blanking plug – in place of unused connections
Part number = 04 for Ø4 mm; 06 for Ø6 mm; 08 for Ø8 mm.
Blanking plug – in place of fitting
Part number
Individual P-supplyPart number
Valve – plug-in, 24 VDC
Part number1 Type Flow Weight5/2 mono stable, rubber seal5/2 mono stable, metal seal5/2 bi stable, rubber seal5/2 bi stable, metal seal5/3 closed center, rubber seal5/3 exhausted center, rubber seal5/3 pressurized center, rubber sealDouble 3/2 nC/nC, rubber sealDouble 3/2 nO/nO, rubber sealDouble 3/2 nC/nO, rubber seal
1. For lockable manual override, add B, C or D at end of part number. Example: VQC2101n-51B.
Blanking plateParallel fitting
Manual override versions
4
91■
VVQ2000-24A-1
VVQ2000-16A
VVQ2000-R-1-C8
VVQ2000-19A
VVQ2000-18A
VVQC2000-1A-D-C8VVQC2000-1A-S-C8
VQ2000-PW-02FVQ2000-PW-02F-XSE502
VVQ2000-n-
VVQ2000-57A
VVZS3000-21A-2*VVZS3000-21A-3*VVZS3000-21A-4*
AXT100-MC26AXT100-MC26-015AXT100-MC26-030AXT100-MC26-050AXT100-MC26-080
VQC 2 10 -➊
1 0 n 5➋ ➌ ➎ ➏➍
➊12345ABC
➋01
➌
B
Knr
➍5 24 VDC1
6 12 VDC
➎
E
➏
B
C
D
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Sandwichmodul – for individual P-shut-off
Part number
Blocking disc – supply
Part number
Individual r-exhaustPart number
Blocking disc – exhaust
Part number
Check valve – prevents back pressure from R-channel
Part number
Expansion part – standard
Part number TypeFor double solenoidFor single solenoid
Sub plate – single assembly
Part number TypeStandardWith M12 connection
name platePart number = number of valve stations.
DIn rail brackets – 1 pair
Part number
D-sub connector – 25-pin, in accordance with MIL-norm (0.3 mm2)
Part number TypeConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
Circular connector – 26-pin (IP67), with cable
Part number TypeConnector onlyConnector with 1.5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
For output modules VQC2000 – electrical accessories, see EX250/-500 fieldbus.
For other versions, contact SMC.For fieldbus components, see chapter 5.
VQC2000 – solenoid valve, plug-in
Individual P-supply
Blocking disc – supply
Name plate
Individual R-exhaust
Blocking disc – exhaust
Sandwichmodul – for individual
P-shut-off
Part number: valve – for valve manifold, see next page
Series VQC2000
Function
5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized centerDouble 3/2 nC/nC1
Double 3/2 nO/nO1
Double 3/2 nC/nO1
1. Only available with rubber seal.
Seal type
Metal sealRubber seal
Options
Standard (0.4 W)Quick response time (12 ms)1
High pressure (1 MPa)2
negative commonExternal pilot3
When more than one option is desired, enter them in alphabetical order.1. 0.95 W2. Only available with metal seal, 0.95 W.3. not available for double 3/2 valve.
rated voltage
1. Fieldbus connection only available for 24 VDC.
LeD/surge voltage suppressor
WithWithout LED, with surge voltage suppressor1
1. not for fieldbus connection.
Manual override
non-locking push type (tool required)Locking for screwdriver (tool required)Locking type (manual)Locking sliding type (manual)
Valve stations are numbered in ascending order, starting from D-side
D-side U-sideValve stations 1 2 3 4 5 6 7 8
1
32
65
4
78
4
92 ■
➋C4 C6 C8
CM
l4
l6
l8
B3
B4
B6
B8
lM
➊01
➌
FD0FD1FD2FD3PD0PD1PD2PD3
PDC
TD0
lD0lD1lD2MD0MD1MD2MD3
SD0ASDA1
SDA2
SD0SDQSDnSDVSDy
SDTA
SDTB
SDTC
SDTD
SDVB
➑
B
D
D
K
nr
S
T
➎
01 8
➏
123
➐
n nPn (–)
➍EX250 EX500 EX126
Dev
icen
et
Pr
OFI
Bu
S-
DP
CC
-lIn
K
AS
-i
CA
no
pen
Dev
icen
et
Pr
OFI
Bu
S-
DP
CC
-lIn
K
rem
ote
I/O
CC
-lIn
K
+COM — — ✔ — — ✔ ✔ ✔ ✔ ✔n –COM ✔ ✔ — ✔ ✔ ✔ ✔ ✔ ✔ —
VV5QC - 08 B2 1 C8 FD1 F / P T l M/ / /VV5QC - 08 B-2 1 C8 SDQ S
➊ ➋ ➌ ➍ ➎ ➏ ➐ ➑
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Cylinder port size
Push-in, Ø4 mmPush-in, Ø6 mmPush-in, Ø8 mmMixed sizes or with port plugTop-connected angle with push-in, Ø4 mmTop-connected angle with push-in, Ø6 mmTop-connected angle with push-in, Ø8 mmBottom-connected angle with push-in, Ø3 mmBottom-connected angle with push-in, Ø4 mmBottom-connected angle with push-in, Ø6 mmBottom-connected angle with push-in, Ø8 mmAngle connector, mixed sizes
When selecting CM/LM, enter size in manifold specification sheet.
number of valve stations
1 station
Maximum number of valve stations de-pends on chosen electrical connection. See Electrical connection/cable length.
Electrical connection/cable lengthInput
D-side Connection/cable lengthValve
stations2
F co
nn. D-sub connector (25P) without cable
1 to 12 (24)
D-sub connector (25P) w. 1.5 m cableD-sub connector (25P) w. 3 m cableD-sub connector (25P) w. 5 m cable
P c
onn
.
Flat cable (26P) without cable1 to 12
(24)Flat cable (26P) with 1.5 m cableFlat cable (26P) with 3 m cableFlat cable (26P) with 5 m cable
Flat cable (20P) without cable1 1 to 9 (18)
T c
onn
.
Terminal connection in box 1 to 10 (20)
l co
nn. Cable (25 wire), 0.6 m wire length
1 to 12 (24)Cable (25 wire), 1.5 m wire length
Cable (25 wire), 3 m wire length
M c
onn
. Multipole connector (26P) without cable1 to 12
(24)Multipole connector (26P) with 1.5 m cableMultipole connector (26P) with 3 m cableMultipole connector (26P) with 5 m cable
S c
onn
ecti
on
Distributed fieldbus (EX500)For fieldbus without fieldbus node
1 to 8 (16)
With fieldbus node for Remote I/OWith fieldbus node for Devicenet/ PROFIBuS-DP/CC-LInK
Fieldbus with in- and outputs (EX250)For fieldbus without fieldbus node
1 to 12 (24)
Fieldbus for DevicenetFieldbus for PROFIBuS-DPFieldbus for CC-LInKFieldbus for CAnopenAS-i, 8 in/8 out, 31-slave model, 2 power supplies
1 to 4 (8)
AS-i, 4 in/4 out, 31-slave model, 2 power supplies
1 to 2 (4)
AS-i, 8 in/8 out, 31-slave model, 1 power supply
1 to 4 (8)
AS-i, 4 in/4 out, 31-slave model, 1 power supply
1 to 2 (4)
Fieldbus with outputs (EX126)
Fieldbus for CC-LInK 1 to 8 (16)
1. P connection: Order cables separately for type 20P.2. numbers in paranthesis indicates maximum number of solenoids for configuration w. mixed single-double solenoid connections. Maximum number of valve stations is determined by total number of solenoids. For mixed connections, use option symbol “K”.
Options
noneAll stations with back-pressure check valves1
With DIn rail (rail length: standard)With DIn rail (rail length: special)2
Special wiring (not double wiring)3
With name plateExternal pilot4
Direct exhaust with built-in silencer5
Branch off P- and R-ports on u-side6
Specify options in alphabetical order. Example: BRS.1. When using backpressure check valves only on neccessary stations, en-ter check valve part number and valve station number in manifold specifica-tion sheet.2. For special DIn rail length, enter D. ( = number of valve stations.) Example: D08. In this case, manifold is mounted on DIn rail for 8 stations, regardless of actual number of stations in manifold. Entered number of stations must be larger than actual number of stations in manifold. Enter D0 for op-tions without DIn rail.3. Ensure that wiring is entered in manifold specification sheet.4. For external pilot option “R”, also enter external pilot option “R” for valves in question.5. Option with built-in silencer does not meet requirement of IP67.6. SuP and EXH ports on u-side branch off (against cylinder port and solenoid) with push-in fitting.
Input block (only entered when
input blocks are used)
Without fieldbus node/input block (SD0)Without input blockWith 1 input block With 8 input blocks
Type of input block (only
entered when input blocks are used)
Without input blockM12, 2 inputsM12, 4 inputsM8, 4 inputs (3 pins)
Polarity, input block (only entered when input blocks
are used)
PnP (+) or without fieldbus node/ input block
Fieldbus polarity
Polarity
Leave box for fieldbus polarity blank for manifold without bus node (SD0).
Part number: valve manifold – for VQC2000 plate assembly/plug-in unit
connection
connection
Series VQC2000
Plate assembly/plug-in
VQC2000 – solenoid valve, plug-in
4
93■
EX
250
EX
260
EX
500
EX
600
EX
126
D-s
ub
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Exploded view VQC2000Electrical connection
and fieldbus End plate, D-side Valve station, base End plate, u-side
S c
onn
ecti
on
(fiel
db
us)
F co
nnec
tio
nP
co
nnec
tio
n
Flat
cab
le
T c
onn
ecti
on
Term
inal
con
n.
l co
nnec
tio
n
Sin
gle
wire
M c
onn
ecti
on
Mul
tipol
e co
nn.
VQC2000 – solenoid valve, plug-in
4
94 ■
5 µm1.0 MPa (10 bar)
VV5QC41-0203FSD0 2 G3/8VV5QC41-0403FSD0 4 G3/8VV5QC41-0603FSD0 6 G3/8VV5QC41-0803FSD0 8 G3/8VV5QC41-1003FSD0 10 G3/8VV5QC41-1203FSD0 12 G3/8
VQ4000-PW-03F-QVQ4000-PW-03F-Q-XSE502
VVQC1000-F25-1VVQC1000-P20-1VVQC1000-P26-1
VVQC1000-M26-1
VVQC1000-T0-1
VVQ4000-10A-1
VVQ4000-P-1-03F
VVQ4000-16A
VVQ4000-R-1-03F
VVQ4000-16A
VVQ4000-20A-1
VQC4101-5 2000 ln/min 230 gVQC4100-5 1700 ln/min 230 gVQC4201-5 2000 ln/min 260 gVQC4200-5 1700 ln/min 260 gVQC4301-5 1900 ln/min 280 gVQC4401-5 2000 ln/min 280 gVQC4501-5 2000 ln/min 280 g
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
VQC4000 – solenoid valve, plug-inMedium Air, lubricated or not lubricated (dry)
Degree of filtrationMax. working pressure
Min. working pressure
5/2 mono stable: 0.2 MPa (2 bar); 5/2 bi stable: 0.15 MPa (1.5 bar); 5/3 with center position: 0.2 MPa (2 bar); metal seal (all): 0.15 MPa (1.5 bar)
Operating temperature up to 50 °C (dry air)
Voltage/power Standard: 24 VDC ±10% (12 VDC on request)/1 W
Flow See table below
Enclosure IP67, factory-assembled in japan; otherwise IP65; D-sub or flat cable, IP50
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard
■ unmatched flexibility and easy configuration because of new internal connector technology
Sub plates – basic type, add electrical connection below.
Part number Stations Connection
Available with interchangeable push-in fittings Ø8, 10 or 12 mm; contact SMC.For built-in silencer, add “-S” after SD0. Example: VV5QC41-0203FSD0-S.
Sub plate – single assembly
Part number TypeStandardWith M12 connection
Additions – for sub plates above
AdditionsManifold 13–24 valve stations/added station1
1. Note! Manifold specification required; for terminal box and 20-pin flat cable some restrictions apply; contact SMC.
Electrical connections – interface modules
Part number TypeD-sub, 25-pinFlat cable, 20-pinFlat cable, 26-pinCircular connector, 26-pin (IP67)Terminal box, 20 connections (IP67)
For molded cable (L connection), contact SMC.
Fieldbus – EX250, EX500 and EX600, see chapter 5
Blanking plate – for unused valve stations
Part number
Individual P-supplyPart number
Blocking disc – supply
Part number
Individual r-exhaustPart number
Blocking disc – exhaust
Part number
Throttle valve block – mounted between valve and manifold
Part number
Valve – plug-in, 24 VDC
Part number1 Type Flow Weight5/2 mono stable, rubber seal5/2 mono stable, metal seal5/2 bi stable, rubber seal5/2 bi stable, metal seal5/3 closed center, rubber seal5/3 exhausted center, rubber seal5/3 pressurized center, rubber seal
1. For lockable manual override, add B at end of part number. Example: VQC4101n-5B.
Blanking plate
4
95■
VVQ4000-25A-1
VVQ4000-37A-1
ARBQ4000-00-P-1 PARBQ4000-00-A-1 AARBQ4000-00-B-1 B
VVQC4000-1A-D-03FVVQC4000-1A-S-03F
VVZS3000-21A-2*VVZS3000-21A-3*VVZS3000-21A-4*
AXT100-MC26AXT100-MC26-015AXT100-MC26-030AXT100-MC26-050AXT100-MC26-080
VQC 4 0 -➊
1 0 5➋ ➌ ➎ ➏➍
➊12345
6
➋01
➌
ry
➍5 24 VDC1
6 12 VDC
➎
E
➏
B
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Pressure-controlled check valve – w. manual residual pressure relief
Part number
Note! Can not be mounted on manifold with external pilot supply.
Individual shut-off for P-supplyPart number
Sandwich regulatorPart number regulated port
Expansion part – standard
Part number TypeFor double solenoidFor single solenoid
D-sub connector – 25-pin, in accordance with MIL-norm (0.3 mm2)
Part number TypeConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
Circular connector – 26-pin (IP67), with cable
Part number TypeConnector onlyConnector with 1.5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
For output modules VQC4000 – electrical accessories, see EX250/-500 fieldbus.
For other versions, contact SMC.For fieldbus components, see chapter 5.
Part number: valve – for valve manifold, see next page
Series VQC4000
Function
5/2 mono stable5/2 bi stable5/3 closed center5/3 exhausted center5/3 pressurized center5/3 exhausted center with pressure-controlled check valves
Seal type
Metal sealRubber seal
Options
Standard (1 W)External pilotLow power (0.5 W)
When more than one option is desired, enter them in alphabetical order.
rated voltage
1. Fieldbus connection only available for 24 VDC.
LeD/surge voltage suppressor
WithWithout LED, with surge voltage suppressor
Manual override
non-locking push type (tool required)Locking for screwdriver (tool required)
VQC4000 – solenoid valve, plug-in
Individual P-supply
Blocking disc – supply
Individual R-exhaust
Blocking disc – exhaust
Throttle valve block
Pressure-controlled check valve
Individual shut-off for P-supply
Sandwich regulator
Valve stations are numbered in ascending order, starting from D-side
D-side
U-side
Valve stations
1
2
3
4
5
6
7
8
4
96 ■
➋C8 C10 C12 02 Rc1/403 Rc3/8B
CM
➊01
➌
FD0FD1FD2FD3PD0PD1PD2PD3
PDC
TD0
lD0lD1lD2MD0MD1MD2MD3
SD0ASDA1
SDA2
SD0SDQSDnSDVSDy
SDTA
SDTB
SDTC
SDTD
SD0WSDQWSDnWSDVW
SDVB
➑
K
n
➎
01 8
➏
1234
➐
n nPn (–)
➍EX240 EX250 EX500 EX126
Dev
icen
et
Pr
OFI
Bu
S-
DP
Dev
icen
et
Pr
OFI
Bu
S-
DP
CC
-lIn
K
AS
-i
CA
no
pen
Dev
icen
et
Pr
OFI
Bu
S-
DP
CC
-lIn
K
rem
ote
I/O
CC
-lIn
K
+COM ✔ — — — ✔ — — ✔ ✔ ✔ ✔ ✔n –COM ✔ ✔ ✔ ✔ — ✔ ✔ ✔ ✔ ✔ ✔ —
VV5QC - 084 1 02 TD0 F / P T l M/ / /VV5QC - 08 -4 1 02 SDQW S
➊ ➋ ➌ ➍ ➎ ➏ ➐ ➑
VV5QC41-08 03 TD0
RcF GT nPT/nPTF
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Cylinder port size
Push-in, Ø8 mmPush-in, Ø10 mmPush-in, Ø12 mm
Bottom-connected Rc1/4Mixed sizes or with port plug
When selecting CM, enter size in manifold specification sheet.
number of valve stations
1 station
Maximum number of valve stations de-pends on chosen electrical connection. See Electrical connection/cable length.
Electrical connection/cable lengthInput
D-side Connection/cable lengthValve
stations2
F co
nn. D-sub connector (25P) without cable
1 to 12 (24)
D-sub connector (25P) with 1.5 m cableD-sub connector (25P) with 3 m cableD-sub connector (25P) with 5 m cable
P c
onn
.
Flat cable (26P) without cable1 to 12
(24)Flat cable (26P) with 1.5 m cableFlat cable (26P) with 3 m cableFlat cable (26P) with 5 m cable
Flat cable (20P) without cable1 1 to 9 (18)
T c
onn
.
Terminal connection in box 1 to 10 (20)
l co
nn. Cable (25 wire), 0.6 m wire length
1 to 12 (24)Cable (25 wire), 1.5 m wire length
Cable (25 wire), 3 m wire length
M c
onn
. Multipole connector (26P) without cable1 to 12
(24)Multipole connector (26P) with 1.5 m cableMultipole connector (26P) with 3 m cableMultipole connector (26P) with 5 m cable
S c
onn
ecti
on
Distributed fieldbus (EX500)For fieldbus without fieldbus node
1 to 8 (16)
With fieldbus node for Remote I/OWith fieldbus node for Devicenet/ PROFI-BuS-DP/CC-LInK
Fieldbus with in- and outputs (EX250)For fieldbus without fieldbus node
1 to 12 (24)
Fieldbus for DevicenetFieldbus for PROFIBuS-DPFieldbus for CC-LInKFieldbus for CAnopenAS-i, 8 in/8 out, 31-slave model, 2 power supplies
1 to 4 (8)
AS-i, 4 in/4 out, 31-slave model, 2 power supplies
1 to 2 4)
AS-i, 8 in/8 out, 31-slave model, 1 power supply
1 to 4 (8)
AS-i, 4 in/4 out, 31-slave model, 1 power supply
1 to 2 (4)
Fieldbus with in- and outputs (EX240)For fieldbus without fieldbus node
1 to 12 (24)
Fieldbus for DevicenetFieldbus for PROFIBuS-DPFieldbus for CC-LInK
Fieldbus with outputs (EX126)
Fieldbus for CC-LInK 1 to 8 (16)
1. P connection: Order cables separately for type 20P.2. numbers in paranthesis indicates maximum number of solenoids for configuration w. mixed single-double solenoid connections. Maximum number of valve stations is determined by total number of solenoids. For mixed connections, use option symbol “K”.
Options
noneSpecial wiring (not double wiring)1
With name plate (only available for T connection)2
When more than one option is desired, enter them in alphabetical order. Example: Kn.1. Ensure that wiring is entered in manifold specification sheet.2. Mounting position for name plate is on top of terminal box cover.
Input block (only entered when
input blocks are used)
Without fieldbus node/input block (SD0)Without input blockWith 1 input block With 8 input blocks
Max. 4 for EX240 and max. 8 for EX250.
Type of input block (only
entered when input blocks are used)
Without input blockM12, 8 inputs (EX240)M12, 2 inputs (EX250)M12, 4 inputs (EX250)M8, 4 inputs (EX250)
Polarity, input block (only entered when input blocks
are used)
PnP (+) or without field-bus node/input block
Fieldbus polarity
Polarity
Leave box for fieldbus polarity blank for manifold without bus node (SD0).
Part number: valve manifold – for VQC4000 plate assembly/plug-in unit
connection
connection
Series VQC4000
Plate assembly/plug-in
Thread – for P, R, A, B port
Cylinder port Thread type
P- and R-ports use same thread
VQC4000 – solenoid valve, plug-in
4
97■
EX
250
EX
260
EX
500
EX
600
EX
240
EX
126
D-s
ub
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Exploded view VQC4000Electrical connection
and fieldbus End plate, D-side Valve station, base End plate, u-side
S c
onn
ecti
on
(fiel
db
us)
F co
nn.
P c
onn
.
Flat
cab
le
T c
onn
ecti
on
Term
inal
con
n.
l co
nnec
tio
n
Sin
gle
wire
M c
onn
ecti
on
Mul
tipol
e co
nn.
VQC4000 – solenoid valve, plug-in
4
98 ■
5 µm1.0 MPa (10 bar)
4000 ln/min
5 µm0.7 MPa (7 bar)
290 ln/minIP67
SV1100-5Fu 66 g
SV1100R-5Fu 66 g
SV1200-5Fu 71 g
SV1200R-5Fu 71 g
SV1300-5Fu 73 g
SV1300R-5Fu 73 g
SV1400-5Fu 73 g
SV1400R-5Fu 73 g
SV1500-5Fu 73 g
SV1500R-5Fu 73 g
SV1A00-5Fu 71 gSV1B00-5Fu 71 gSV1C00-5Fu 71 g
SV1000-60-5A-1A
SV1000-60-5B-1A
SS5V1-W10S10D-02D-C6 2SS5V1-W10S10D-04B-C6 4SS5V1-W10S10D-06B-C6 6SS5V1-W10S10D-08B-C6 8SS5V1-W10S10D-10B-C6 10SS5V1-W10S10D-12B-C6 12SS5V1-W10S10D-14B-C6 14SS5V1-W10S10D-16B-C6 16SS5V1-W10S10D-18B-C6 18SS5V1-W10S10D-20B-C6 20
VVQC1000-F25-1VVQC1000-P26-1
VVQC1000-M26-1
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
VQ5000 – solenoid valve, plug-inMedium Compressed air, lubricated or not lubricated
Degree of filtrationMax. working pressure
Min. working pressure (rubber seal/metal seal)
5/2 mono stable: 0.2 MPa (2 bar)/0.1 MPa (1 bar); 5/2 bi stable: 0.15 MPa (1.5 bar)/0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar)/0.15 MPa (1.5 bar)
Operating temperature –10 to 50 °C (dry air)Voltage/power 24 VDC ±10% (other voltages on request)/1 W
FlowEnclosure IP65 (except for D-sub)
Manual override Standard: non-lockable (lockable on request)LeD, surge voltage suppressor Standard
For more information, contact SMC.
■ More compact than ISO 3 ■ Lower weight ■ More accessories
SV1000 – solenoid valve, tie rod typeMedium Air, lubricated or not lubricated (dry)
Degree of filtrationMax. working pressure
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar)
Operating temperature up to 50 °C (dry air)
Voltage/power Standard: 24 VDC (12 VDC on request)/0.65 W
FlowEnclosure
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard, valve has no polarity
■ Easy to expand, connectors between valves ■ Highest enclosure IP67
Valve – plug-in
Part number1 Type Weight5/2 mono stable, rubber seal5/2 mono stable, rubber seal, external pilot5/2 bi stable, rubber seal5/2 bi stable, rubber seal, external pilot5/3 closed center, rubber seal5/3 closed center, rubber seal, external pilot5/3 exhausted center, rubber seal5/3 exhausted center, rubber seal, external pilot 5/3 pressurized center, rubber seal5/3 pressurized center, rubber seal, external pilot 5/4 double 3/2, nC/nC, rubber seal5/4 double 3/2, nO/nO, rubber seal5/4 double 3/2, nC/nO, rubber seal
1. Add D for lockable manual override. Example: SV1100-5FuD.
Output modules – for electrical accessories, see EX500 fieldbus
Part number Type1
One normally open relay output, 110 VAC/3 A, 30 VDC/3 ATwo normally open relay outputs, 110 VAC/0.3 A, 30 VDC/1 A
1. Load capacity for resistive loads.
Sub plates – basic type1, add electrical connection below
Part number number of stations
1. For other versions, contact SMC.
Electrical connections – interface modules
Part number TypeD-sub, 25-pinFlat cable, 26-pinCircular connector, 26-pin (IP67)
Fieldbus – EX250, EX260, EX500 and EX600, see chapter 5
use interface for VQC series for sub plates above.
4
99■
5 µm0.7 MPa (7 bar)
290 ln/minIP67
SV1100-5Fu 66 g
SV1100R-5Fu 66 g
SV1200-5Fu 71 g
SV1200R-5Fu 71 g
SV1300-5Fu 73 g
SV1300R-5Fu 73 g
SV1400-5Fu 73 g
SV1400R-5Fu 73 g
SV1500-5Fu 73 g
SV1500R-5Fu 73 g
SV1A00-5Fu 71 gSV1B00-5Fu 71 gSV1C00-5Fu 71 g
SV1000-60-5A-1A
SV1000-60-5B-1A
SS5V1-W16CD-02D-C6 SS5V1-W16S0D-02D-C6
SS5V1-16FD1-02D-C6SS5V1-16PD1-02D-C6
SS5V1--02D-C6 2SS5V1--04D-C6 4SS5V1--06D-C6 6SS5V1--08D-C6 8SS5V1--10D-C6 10SS5V1--12B-C6 12SS5V1--14B-C6 14SS5V1--16B-C6 16SS5V1--18B-C6 18
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
SV1000 – solenoid valve, cassette typeMedium Air, lubricated or not lubricated (dry)
Degree of filtrationMax. working pressure
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar)
Operating temperature up to 50 °C (dry air)
Voltage/power Standard: 24 VDC (12 VDC on request)/0.65 W
FlowEnclosure
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard, valve has no polarity
■ unmatched flexibility ■ Easy to assemble, expand and modify
Valve – plug-in
Part number1 Type Weight5/2 mono stable, rubber seal5/2 mono stable, rubber seal, external pilot5/2 bi stable, rubber seal5/2 bi stable, rubber seal, external pilot5/3 closed center, rubber seal5/3 closed center, rubber seal, external pilot5/3 exhausted center, rubber seal5/3 exhausted center, rubber seal, external pilot 5/3 pressurized center, rubber seal5/3 pressurized center, rubber seal, external pilot 5/4 double 3/2, nC/nC, rubber seal5/4 double 3/2, nO/nO, rubber seal5/4 double 3/2, nC/nO, rubber seal
1. Add D for lockable manual override. Example: SV1100-5FuD.
Output modules – 24 VDC. For electrical accessories, see EX250/-500 fieldbus.
Part number Type1
One normally open relay output, 110 VAC/3 A, 30 VDC/3 ATwo normally open relay outputs, 110 VAC/0.3 A, 30 VDC/1 A
1. Load capacity for resistive loads.
Sub plates – cassette type (16)
Sub plate Example of part numberMultipole connection, IP67For EX500 Gateway (Gateway parts ordered separately), IP67D-sub connection, IP40Flat cable connection, IP40
Part number number of stations
For other versions, contact SMC. For fieldbus compo-nents, see chapter 5.
4
100 ■
VVQ1000-50A-
An203-KM8
SV1000-67-1A
SV1000-38-1A-C6
SV1000-39-1A-C6
SV1000-05-P PSV1000-05-A1 ASV1000-05-B1 BSV1300-05-P PSV1300-05-A1 ASV1300-05-B1 B
KQ2P-
VVQ1000-58A
SV1000-74-1A
GVVZS3000-21A-2GVVZS3000-21A-3GVVZS3000-21A-4
AXT100-MC26AXT100-MC26-015AXT100-MC26-030AXT100-MC26-050AXT100-MC26-080
SV1000-59-1A
SV1000-59-2A
SV1000-50-1A-
SV1000-50-2A-
SX3000-77-1A
SX3000-77-1A
SV1000-50-3A-
SV1000-50-4A-
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
Accessories for SV1000 – solenoid valve, tie rod and cassette type
replacement fittingPart number = C3 for Ø3.2 mm; C4 for Ø4 mm; C6 for Ø6 mm.
Silencer – for exhaust
Part number
Blanking platePart number
Individual P-supplyPart number
Individual r-exhaustPart number
Sandwich regulator – with pressure gauge
Part number regulated port For valve type
Mono- and bi stable
For 3-position
Blanking plug – in place of unused connections
Part number = 03 for Ø3.2 mm; 04 for Ø4 mm; 06 for Ø6 mm.
Blanking plug – in place of fitting
Part number
Blocking indicatorPart number
D-sub connector – 25-pin, in accordance with MIL-norm (0.3 mm2)
Part number TypeConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
Circular connector – 26-pin (IP67), with cable
Part number TypeConnector onlyConnector with 1.5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cable
Blocking disc – supply
Part number
Blocking disc – exhaust
Part number
Expansion part – single solenoid
Part number = C3 for Ø3.2 mm; C4 for Ø4 mm; C6 for Ø6 mm.
Expansion part – double solenoid
Part number = C3 for Ø3.2 mm; C4 for Ø4 mm; C6 for Ø6 mm.
Blanking plate Expansion part
For manifold type 10S
For manifold type 16S
Blocking disc – supply
Part number
Blocking disc – exhaust
Part number
Expansion part – single solenoid
Part number = C3 for Ø3.2 mm; C4 for Ø4 mm; C6 for Ø6 mm.
Expansion part – double solenoid
Part number = C3 for Ø3.2 mm; C4 for Ø4 mm; C6 for Ø6 mm.
4
101■
5 µm0.7 MPa (7 bar)
580 ln/minIP67
SV2100-5Fu 74 g
SV2100R-5Fu 74 g
SV2200-5Fu 78 g
SV2200R-5Fu 78 g
SV2300-5Fu 83 g
SV2300R-5Fu 83 g
SV2400-5Fu 83 g
SV2400R-5Fu 83 g
SV2500-5Fu 83 g
SV2500R-5Fu 83 g
SV2A00-5Fu 78 gSV2B00-5Fu 78 gSV2C00-5Fu 78 g
SV2000-60-5A-1A
SV2000-60-5B-1A
SS5V2-W10S10D-02D-C8 2SS5V2-W10S10D-04D-C8 4SS5V2-W10S10D-06D-C8 6SS5V2-W10S10D-08D-C8 8SS5V2-W10S10D-10D-C8 10SS5V2-W10S10D-12B-C8 12SS5V2-W10S10D-14B-C8 14SS5V2-W10S10D-16B-C8 16SS5V2-W10S10D-18B-C8 18SS5V2-W10S10D-20B-C8 20
VVQC1000-F25-1VVQC1000-P26-1
VVQC1000-M26-1
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
SV2000 – solenoid valve, tie rod typeMedium Air, lubricated or not lubricated (dry)
Degree of filtrationMax. working pressure
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar)
Operating temperature up to 50 °C (dry air)
Voltage/power Standard: 24 VDC (12 VDC on request)/0.65 W
FlowEnclosure
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard, valve has no polarity
■ Easy to expand, connectors between valves ■ Highest enclosure IP67
Valve – plug-in
Part number1 Type Weight5/2 mono stable, rubber seal5/2 mono stable, rubber seal, external pilot5/2 bi stable, rubber seal5/2 bi stable, rubber seal, external pilot5/3 closed center, rubber seal5/3 closed center, rubber seal, external pilot5/3 exhausted center, rubber seal5/3 exhausted center, rubber seal, external pilot 5/3 pressurized center, rubber seal5/3 pressurized center, rubber seal, external pilot 5/4 double 3/2, nC/nC, rubber seal5/4 double 3/2, nO/nO, rubber seal5/4 double 3/2, nC/nO, rubber seal
1. Add D for lockable manual override. Example: SV2100-5FuD
Output modules – for electrical accessories, see EX500 fieldbus
Part number Type1
One normally open relay output, 110 VAC/3 A, 30 VDC/3 ATwo normally open relay outputs, 110 VAC/0.3 A, 30 VDC/1 A
1. Load capacity for resistive loads.
Sub plates – basic type1, add electrical connection below
Part number number of stations
1. For other versions, contact SMC.
Electrical connections – interface modules
Part number TypeD-sub, 25-pinFlat cable, 26-pinCircular connector, 26-pin (IP67)
Fieldbus – EX250, EX260, EX500 and EX600, see chapter 5
use interface for VQC series for sub plates above.
4
102 ■
5 µm0.7 MPa (7 bar)
520 ln/minIP67
SV2100-5Fu 74 g
SV2100R-5Fu 74 g
SV2200-5Fu 78 g
SV2200R-5Fu 78 g
SV2300-5Fu 83 g
SV2300R-5Fu 83 g
SV2400-5Fu 83 g
SV2400R-5Fu 83 g
SV2500-5Fu 83 g
SV2500R-5Fu 83 g
SV2A00-5Fu 78 gSV2B00-5Fu 78 gSV2C00-5Fu 78 g
SV2000-60-5A-1A
SV2000-60-5B-1A
SS5V2-W16CD-02D-C8 SS5V2-W16S0D-02D-C8
SS5V2-16FD1-02D-C8SS5V2-16PD1-02D-C8
SS5V2--02D-C8 2SS5V2--04D-C8 4SS5V2--06D-C8 6SS5V2--08D-C8 8SS5V2--10D-C8 10SS5V2--12B-C8 12SS5V2--14B-C8 14SS5V2--16B-C8 16SS5V2--18B-C8 18
Sub
ject
to
cha
nge
SOlEnOID VAlVES, MEChAnICAl AnD MAnuAl VAlVES
= DElIVEry EX-STOCK FOr MOrE InFO, ASK ThE SMC EXPErTS: PhOnE +31 (0) 20 531 88 88 / [email protected]
SV2000 – solenoid valve, cassette typeMedium Air, lubricated or not lubricated (dry)
Degree of filtrationMax. working pressure
Min. working pressure
5/2 mono stable: 0.15 MPa (1.5 bar); 5/2 bi stable: 0.1 MPa (1 bar); 5/3 with center position: 0.2 MPa (2 bar); double 3/2: 0.15 MPa (1.5 bar)
Operating temperature up to 50 °C (dry air)
Voltage/power Standard: 24 VDC (12 VDC on request)/0.65 W
FlowEnclosure
Manual override Standard: non-lockableLeD, surge voltage suppressor Standard, valve has no polarity
■ unmatched flexibility ■ Easy to assemble, expand and modify
Valve – plug-in
Part number1 Type Weight5/2 mono stable, rubber seal5/2 mono stable, rubber seal, external pilot5/2 bi stable, rubber seal5/2 bi stable, rubber seal, external pilot5/3 closed center, rubber seal5/3 closed center, rubber seal, external pilot5/3 exhausted center, rubber seal5/3 exhausted center, rubber seal, external pilot 5/3 pressurized center, rubber seal5/3 pressurized center, rubber seal, external pilot 5/4 double 3/2, nC/nC, rubber seal5/4 double 3/2, nO/nO, rubber seal5/4 double 3/2, nC/nO, rubber seal
1. Add D for lockable manual override. Example: SV2100-5FuD.
Output modules – 24 VDC. For electrical accessories, see EX250/-500 fieldbus.
Part number Type1
One normally open relay output, 110 VAC/3 A, 30 VDC/3 ATwo normally open relay outputs, 110 VAC/0.3 A, 30 VDC/1 A
1. Load capacity for resistive loads.
Sub plates – cassette type (16)
Sub plate Example of part numberMultipole connection, IP67For EX500 Gateway (Gateway parts ordered separately), IP67D-sub connection, IP40Flat cable connection, IP40
Part number number of stations
For other versions, contact SMC. For fieldbus compo-nents, see chapter 5.