SMART CYCLING HELMET1.0.0
RIDE CONNECTEDBlast your favorite tunes, talk over the intercom with your buddies, hear directions from your GPS and more, all through your Sena X1 Smart Cycling Helmet. With built-in Bluetooth® capabilities, HD speakers and a microphone using Advanced Noise Control™, technology has never felt so minimal or freeing.
Bluetooth® Integrated
Four-Way Intercom
Built-in Speakers and Mic
Music Sharing
Advanced Noise Control™
900-Meter Intercom
GETTING STARTED
1. This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT SENA.COM/DOCUMENTS.
2. Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit Sena.com/device-manager-download/ to see how to update your product.
3. Users can follow Sena on Facebook, YouTube and Instagram to receive the most up to date information on products, helpful tips and all other announcements regarding Sena products.
GETTING STARTED
SENA Technologies, Inc.Sena.comCustomer Support: support.sena.comE-mail: [email protected]
GETTING STARTEDHow to Use This Guide The legend and callouts are here to help you read the illustrations. New technology can be confusing, but we’ve created a simple way to perform actions using illustrations.
Tap button the specifi ed number of times
Icon Legend
(+) Button (-) Button
Center Button
Buttons
Press and Hold button for the specifi ed amount of time
Audible prompt from the Bluetooth Module
Function = Button(s) to Tap or Hold
10sHOLD
= 1sHOLD
1xTAP
“Hello”
QUICK START GUIDE
QUICK START GUIDEHelmet Structure
Buckle
DC Power Charging & Firmware Upgrade Port
Retention System
Strap Adjuster
Bluetooth Communication Module
Answer/End Phone CallReject an Incoming Phone CallStart/End Intercom ConversationPlay/Pause MusicEnter Intercom Pairing ModeEnter Voice Confi guration Settings
Microphone
Speakers
(+) Button(-) Button
Center Button
Increase VolumeTrack ForwardScan Radio StationsSpeed Dial
Decrease VolumeTrack Back
FM Radio On/Off
Fault Reset Button
Blue/Red/Green LED Lights
QUICK START GUIDE
Answer/End Phone CallReject an Incoming Phone CallStart/End Intercom ConversationPlay/Pause MusicEnter Intercom Pairing ModeEnter Voice Confi guration Settings
Microphone
Speakers
(+) Button(-) Button
Center Button
Increase VolumeTrack ForwardScan Radio StationsSpeed Dial
Decrease VolumeTrack Back
FM Radio On/Off
Fault Reset Button
Blue/Red/Green LED Lights
QUICK START GUIDE
How to Fit the Helmet 1. Position the helmet on your head with the
front covering your forehead.
2. Position the strap adjuster centered, just below your ears.
3. Position the helmet low on your forehead with the buckle under the chin and back against the throat. The straps should fit comfortably around both ears.
Buckle Strap Adjuster
Chinstrap
O-Ring
QUICK START GUIDE
4. Adjust the chinstrap tension at the buckle so the chinstrap is tight and comfortable by pulling the chinstrap end through the buckle to either tighten or loosen as needed. Use the “O-Ring” to secure the excess strap.
Buckle Strap Adjuster
Chinstrap
O-Ring
Note: Check the chinstrap’s position and tension regularly to ensure proper fit.
5. Turn the retention system knob clockwise to tighten or counterclockwise to loosen.
Retention System Knob
Retention System
QUICK START GUIDE
6. To change the height of the retention system, firmly pull or push the retention system upward or downward to a different position.
Retention System Knob
Retention System
Basic OperationsPowering On Powering Off
= =
POWER ON
POWER OFF
1sHOLD
1xTAP
Volume Up Volume Down
= =
VOLUME UP
VOLUME DOWN
1xTAP
1xTAP
QUICK START GUIDE
Checking the Battery LevelThere are two ways to check the battery levels, visually using the LED lights, and audibly. Instructions are for when powering the Bluetooth Module on.
Visual Method Audible Method
= =
VISUALMETHOD
AUDIBLEMETHOD
1sHOLD
3sHOLD
=HIGH
=MED
=LOW
“Battery levelhigh/medium/low”
Mobile Phone Pairing Steps continued...
=
=
==
CONFIG. MENU
NAVIGATE FORWARD
1X
LED STATUS
PIN NUMBER
“Phone pairing”
“Confi guration menu”
Alternating blue and red fl ashing lights indicate device is now discoverable.
1xTAP
10sHOLD
Bluetooth Pairing (Phone, MP3, GPS)
QUICK START GUIDE
Answer a Call
End/Reject a Call
ANSWER
END/REJECT
= 1xTAP
= 2sHOLD
Make Call with Voice Dialer
VOICE DIAL
= 3sHOLD
Mobile Phone
Music ControlsPlay/Pause Next Track
Previous Track
= =
=
“[Beep, Beep]”
1sHOLD
1sHOLD
1sHOLD
QUICK START GUIDE
Intercom PairingUp to three people can communicate via intercom with the X1 Smart Cycling Helmet simply by pairing their headsets.
B
B
A
A
Pairing with Intercom BIntercom Pairing
and
or
D
= 5sHOLD
=
“Intercom pairing”
1xTAP
=
LED STATUS
Flashing blue LED confi rms intercoms are paired.
A
B
C
Note: Repeat the following steps to pair with Intercom Friends C & D.
QUICK START GUIDE
Two-Way Intercom
D
C
B
Start/End with Intercom Friend 1
Start/End with Intercom Friend 3
Start/End with Intercom Friend 2
Last-Come, First-Served
Intercom Friend 1
Intercom Friend 1
YOU
YOU
YOU Intercom Friend 1
Intercom Friend 2
Intercom Friend 2
Intercom Friend 3
A D
C
C
B
B
= 1xTAP
= 2xTAP
= 3xTAP
A B
A
Group IntercomStart Group Intercom End Group Intercom
END GROUP
INTERCOM
START GROUP
INTERCOM
= 1xTAP
=
LED STATUS
Green LED Flashing
“Group intercom” “Group intercom terminated”
= 1sHOLD
QUICK START GUIDE
RadioFM Radio On
FM Radio Off
=
=
1sHOLD
1sHOLD
“[Beep, Beep]”
“[Beep, Beep]”
Scan and Save Stations
START SCANNING
=
1xTAP
1sHOLD
STOP SCANNING
= 1sHOLD
SAVE STATION
=
“Preset (#)”
Seek and Save Stations
SEEK FORWARD
SEEK BACKWARD
=
=
ENTER PRESET MODE
= 3sHOLD
“Preset (#)”
CHOOSE PRESET #
= 1xTAP
1sHOLD
SAVE TO PRESET #
=
DELETE STATION
1sHOLD
=
2xTAP
2xTAP
QUICK START GUIDE
Navigating Preset Stations
= 1sHOLD
NAVIGATE FORWARD
Note: You can also use the Sena Device Manager or the Sena Smartphone App to save the preset stations.
Configuration MenuAccessing theConfi guration Menu
Enable/Disable or Execute Menu Options
Navigating Between Menu Options
ENABLE/DISABLE
=
=
10sHOLD
“Confi guration menu” “[Menu prompt]”
“[Menu prompt]”
NAVIGATE FORWARD
CONFIG. MENU
NAVIGATE BACKWARD
= 1xTAP
= 1xTAP
1xTAP
EXECUTE
QUICK START GUIDE
Sena Device ManagerThe Sena Device Manager allows you to upgrade the Bluetooth Communication Module’s firmware and configure its settings directly from your PC or Apple computer. Using this software, you can assign speed dial presets, FM radio station presets and more. For more information on downloading the Sena Device Manager, please visit Sena.com.
Sena Smartphone AppThe Sena Smartphone App allows you to configure the Bluetooth Communication Module’s settings, as well as access the User’s and Quick Start Guides. To do so, pair your mobile phone with the Bluetooth Communication Module by following the instructions in the “Bluetooth Pairing (Phone, MP3, GPS)” section in this quick start guide. Run the Sena Smartphone App and configure the settings directly from your smartphone. You can download the Sena Smartphone App for Android and Apple operating systems from Sena.com/headset-app.
QUICK START GUIDE
TroubleshootingFactory Reset Fault Reset
= =10sHOLD
1xTAP
“Confi guration menu”
“Factory reset”
NAVIGATE BACKWARD
2X
= 2xTAP
= 1xTAP
EXECUTE
QUICK START GUIDE
Note: Fault Reset will not restore the Bluetooth module to factory default settings.
QUICK REFERENCE
TYPE OPERATION BUTTON COMMANDS
Basic
Operations
Power on/off 1sHOLD
Volume up/ Volume down
1xTAP
1xTAP
Mobile Phone
Answer phone call 1xTAP
End/reject phone call
2sHOLD
Voice dial
3sHOLD
Speed dial
3sHOLD
Music
Play/Pause music
1sHOLD
Track forward
1sHOLD
Track back
1sHOLD
QUICK REFERENCE
TYPE OPERATION BUTTON COMMANDS
Intercom
Intercom pairing
5sHOLD
1xTAP
Start/end each intercom
1xTAP
End all intercoms
1sHOLD
Start group intercom
1xTAP
End group intercom
1sHOLD
FM Radio
FM radio on/off
1sHOLD
Select preset
1sHOLD
Seek stations forward
2xTAP
Seek stations backward
2xTAP
Scan up FM band/stop scanning
1sHOLD
Save preset while scanning
1xTAP