SIVA SATHIBABU TUPAKULA Mechanical Engineer- Execution of Turbines, Rotary Equipment and Piping

Skype: shiva.tupakula1 | LinkedIn: https://in.linkedin.com/in/shivatupakula

: shiva.tupakula@gmail.com | : +91-9966533111

Looking for a Career Position where Professional Experience and expertise will be

regarded as asset of an Organization

OVERVIEW

Over 5 years of Experience in Erection, Pre-Commissioning & Commissioning

activities of Rotary Equipment and Piping

Currently working with M/s. Technical Development Company for Cont.

(TD)-KSA as a Senior Engineer, Had 3 Years of Experience with M/s. L&T-Power

Ltd as Mechanical Engineer- Execution.

Handled operations involving Erection and Commissioning works of Rotary

Equipment and Critical piping for 3 X 660 MW Thermal Power plant- Chattisgarh-

India.

Handled operations involving erection and commissioning of Turbines, Rotary

Equipment, LP and HP Piping for Turbine and its Auxiliaries for 2 X 800 MW

Thermal power plant- Nellore-India

Currently Handling the Engineering, Procurement and Construction Activities

of 1X 50 MW Gas Turbine Power Plant- Dammam-Kingdom of Saudi Arabia.

Well versed with the concepts of ASME B31.1, ANSI, API 650, NFPA,

HCIS, AWWA-D103 Codes and Standards and Certified with ASNT Level II.

KEY SKILLS

Strategic Planning: Establishing various implementation strategies for

achievement of the final schedule and plan sheet for Erection and Commissioning.

Project Management: Overseeing project activities from conceptualization to

execution including finalization of technical specifications, coordinating with Designer,

Material Finalization, Material attestation from Client, stage inspections, scheduling,

progress monitoring, and Sub contractors handling.

Erection and Alignment Operations: Studying drawings, plans or patterns of

equipment/piping to be erected as per drawing, preparing templates as per requirement.

Production Management: Planning for day-to-day productivity related

activities, Resource mobilization by maintaining Quality for achieving monthly

productivity targets.

Process Enhancement / Improvement: Deploying various methodologies to

analyze erection procedures, recommending modifications to minimize deviations.

Implementing Minimum two best practices per year that have huge impact on cost and

time factor.

Quality Control: Developing mechanical maintenance and operations

procedures to increase the efficiency; implementing standards and ensuring adherence

to quality standards.

Safety: Achieving Zero Accident by maintaining safety standards & Awareness

CONTACT ADDRESS

Door Number- 37/6/47, Tilak

Street, Kakinada-533001,

Andhra Pradesh.

TOTAL EXPERIENCE

Two years in Gulf as

a senior engineer in Site

Engineering.

Three years in India as

an Execution Engineer in Site

Engineering.

PASSPORT DETAILS

Passport no: J6386645

Place of Issue: Visakhapatnam

Date of Issue: 27/06/2011

Date of Expiry: 26/06/2021

HIGHER EDUCATION

Bachelor of Technology in

Mechanical Engineering with

68.2% of Aggregate in Avanthi

Inst. Of Engineering and

Technology

INTEREST AND PAST TIME

Sports- Basket Ball and

Swimming

Hectic travelling

PERSONAL DOSSIER

Marital Status: Single

Born: 29th Oct 1989

Sex: Male

Father: Physically Challenged

Mother: Home Maker

Languages: English, Hindi,

Telugu, Tamil, Arabic (Beginr.)

WORK EXPERIENCE

Since April’2011 to February’2013 with M/s L&T-power ltd, joined as Graduate Engineer Trainee and raised to the

position of Senior Engineer in Execution, Currently Joined M/s. Technical Development-KSA as a Senior Engineer

1. SENIOR ENGINEER

M/s. Technical Development Company- Saudi Arabia

April 2014 to Till date

Project profile:

Engineering, Procurement and Construction of 1*50 MW Trent 60 WLE Gas Turbine Power Plant at King Abdul

Aziz SeaPort, Dammam- Kingdom of Saudi Arabia.

Design Consultant: M/s. Radicon Gulf Consult- Al-Khobar

Material: Rolls-Royce Energy System, Nesma-Havtek

Client: King Abdul Aziz Sea Ports Authority- Dammam

Areas Working Currently:

Engineering, Procurement & Erection, Commissioning of of 50 MW Gas Turbine- Liquid Fuel Fired, Fuel Tanks-

1200 M3- 2 Nos., DM Water Plant- GLS Tanks 2 x 1200 M3, RO Plant, Black Start Generators, Inter Skid and Off Skid

Piping and Fire Fighting network- Foam and water.

2. SENIOR ENGINEER

M/s. L&T-ECC, TPPC-BU

July 2012 to Feb 2014

Project profile:

Erection and commissioning of 2*800 MW Turbine and Turbine Auxiliaries (Ultra Super Critical Turbine) at

Krishnapatnam, Nellore, Andhra Pradesh- India.

Consultant: M/s L&T-MHI Ltd.

Client: M/s AP GENCO.

Areas Worked:

Erection and Commissioning of piping for Turbine, CEP’s (Condensate Extraction Pumps), BFP’s-Turbine drive

and Motor drive, Condensate Evacuation Pumps and Ammonia and Hydrazine Dosing system, CCW and Lube oil lines.

3. GRADUATE ENGINEER

M/s. L&T-ECC, TPPC-BU

April 2011 to July 2012

Project profile:

Construction and commissioning of 3*660 MW Boiler (India’s first super critical Boiler) at sipat, Bilaspur,

Chattisgarh- India.

Consultant: M/s Doosan Heavy Industries Ltd.

Client: M/s NTPC Ltd.

Areas Worked:

Erection and Commissioning activities of Pulverizes, Raw Coal Feeders, FD, PA & ID Fans, Seal Air Fans, HRH /

CRH / Main steam Piping, and CCW lines, Lube oil and other miscellaneous piping like Instrument air, Service air,

Equipment On-skid piping.

RESPONSIBILITIES IN SITE/PROJECT ENGINEERING

Studying and interpretation of P&ID and ISO Drawings, Material Inspection with packing list in presence of Quality.

Extraction of scope (Tonnage and Inch dia / Inch Meter) of work from Drawings and planning accordingly for material

and manpower prior to the preparation of Site Plan and Schedule.

Coordinating with all related departments and planning consequently for 3-Month look ahead plan for manpower, Tools

and Tackles, Consumables and Machinery. Maintaining DTS (Daily task sheets) with Man-hours v/s Productivity.

Planning and scheduling for achieving daily, weekly and monthly targets without compromising in Quality and Safety.

Fabrication and Erection, Ensuring the elevation and Centre line checks as per RFC / IFC drawings.

Alignment (Rim face or Rotalign Laser) for the all the Rotary equipment prior to Preliminary and Final grouting.

Trail Runs for the Turbine and other Rotary Equipment, Lube Oil Flushing / Sand Blasting / Hydro test / Pneumatic or

Soap Leak test for air Piping.

Erection of Temporary Steam Blowing pipes for LP and HP pipes, Performing and Monitoring the Steam blowing.

Ensuring the Latest revision of drawings from client and preparation of AS-BUILT drawings.

Carrying out Commissioning activities of piping such as Flushing and Chemical cleaning with coordination of Lead

Commissioning teams.

Preparation for Inspection reports / Protocols stage by stage.

Fit-Up and welding activities for Piping and Taking appropriate measures when welding to be carried out on equipment.

Achieving Project milestones as per company norms without compromising on Safety and Quality.

Gathering the Process Information and Control Philosophies of Pumps, Piping, and Utility Consumption details etc.

Receiving and Studying the Data Sheets, Calculation Sheets, Product Catalogs with respective to the Consultant

Standards.

Scheduling the Turbine-TA Presence as per the Installation activities.

Coordinating with Procurement Department for the Purchase of Project Material with Company’s Protocol

Hands-on approach with Sub- Contractors related to Erection Activities to achieve the Productivity as per the Company

Norms.

PROFESSIONAL SKILL SET

DECLARATION

I do declare myself the above statements are true to the best of my knowledge and belief.

Place : Kakinada-AP- India Signature (T.S.Sathi babu)

Date :