E200301-01-714-V10.0I-01
SIEMENS S.A.
SPOTS V10 Drop 4
Siemens Performance Reports(Internal Use)
July/2003
SIEMENS S.A.OG IC R&D WON NM CP2
R. Irmãos Siemens, nº 12720-093 AmadoraPortugal
All rights reserved. No part of this document may be reproduced or transmitted inany form or by any means, electronic or mechanical, including photocopying andrecording, for any purpose other than the purchaser’s personal use without thewritten permission of Siemens S.A.This document consists of a total of 255 pages.The information contained in this document is subject to change.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 3
Table of Contents
1 INTRODUCTION ......................................................................................................................................101.1 Purpose ...................................................................................................................................................... 101.2 Reference Documents................................................................................................................................ 111.3 Abbreviations.............................................................................................................................................. 121.4 Definitions................................................................................................................................................... 13
2 PU LOAD ..............................................................................................................................................172.1 Core Network.............................................................................................................................................. 17
2.1.1 MP Load Report................................................................................................................................. 172.1.2 CP Load Report ................................................................................................................................. 19
2.2 Radio Access Network ............................................................................................................................... 212.2.1 BSC Load Report............................................................................................................................... 212.2.2 NodeB Load Report ........................................................................................................................... 232.2.3 RNC Processor Load Report ............................................................................................................. 25
3 SS7 SURVEILLANCE .............................................................................................................................273.1 CCNC Platforms ......................................................................................................................................... 27
3.1.1 CCNC SS7 Switch Surveillance Report ............................................................................................. 273.1.2 CCNC SS7 Route Set Surveillance Report........................................................................................ 293.1.3 CCNC SS7 Link Set Surveillance Report........................................................................................... 303.1.4 CCNC SS7 Link Surveillance Report ................................................................................................. 313.1.5 CCNC SS7 Link Load Report ............................................................................................................ 32
3.2 SSNC Platforms ......................................................................................................................................... 343.2.1 SSNC SS7 Node Surveillance Report ............................................................................................... 343.2.2 SSNC SS7 Sign Point Surveillance Report........................................................................................ 353.2.3 SSNC SS7 Route Set Surveillance Report ........................................................................................ 363.2.4 SSNC SS7 Link Set Surveillance Report ........................................................................................... 373.2.5 SSNC SS7 Link Surveillance Report ................................................................................................. 39
4 CORE NETWORK....................................................................................................................................414.1 CS .............................................................................................................................................................. 41
4.1.1 TGRP Load Report ............................................................................................................................ 414.1.2 TGRP Load Type Report ................................................................................................................... 464.1.3 Dest Report........................................................................................................................................ 484.1.4 Flow Report ....................................................................................................................................... 524.1.5 PBX Load Report ............................................................................................................................... 564.1.6 PBX Service Load Report .................................................................................................................. 584.1.7 MSC VLR Surveillance ...................................................................................................................... 60
4.1.7.1 MSC Grade of Service Report................................................................................................... 604.1.7.2 VLR Load Analysis Report ........................................................................................................ 644.1.7.3 Mobile Originating Calls Analysis Report .................................................................................. 66
4.1.7.3.1 UMTS Mobile Originating Calls Analysis Report............................................................... 694.1.7.4 Mobile Terminating Calls Analysis Report................................................................................. 72
4.1.7.4.1 UMTS Mobile Terminating Calls Analysis Report ............................................................. 754.1.7.5 Handover Analysis Report......................................................................................................... 77
4.1.7.5.1 UMTS Handover Analysis Report ..................................................................................... 794.1.7.6 Location Update Analysis Report .............................................................................................. 814.1.7.7 Short Message Service Analysis Report ................................................................................... 834.1.7.8 Data And Fax Analysis Report .................................................................................................. 854.1.7.9 MSC Call Flow Report............................................................................................................... 914.1.7.10 MSC Handover Flow Report ................................................................................................... 94
4.2 PS............................................................................................................................................................... 954.2.1 ATM SP on xGSN .............................................................................................................................. 96
4.2.1.1 GTP Throughput Report............................................................................................................ 964.2.2 GGSN ................................................................................................................................................ 98
4.2.2.1 Virtual Router Load Report........................................................................................................ 984.2.2.2 ISP Session Analysis Report................................................................................................... 100
4.2.3 ATM MP on SGSN........................................................................................................................... 1024.2.3.1 MP Overload ........................................................................................................................... 102
4.2.3.1.1 SGSN Uplink MP Overload Report ................................................................................. 1024.2.3.1.2 SGSN Downlink MP Overload Report ............................................................................ 105
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
4 E200301-01-714-V10.0I-01
4.2.3.2 SGSN Licence Violations Report ............................................................................................ 1074.2.3.3 Reports with 2nd and 3rd Generation variants .......................................................................... 109
4.2.3.3.1 SGSN Session Analysis Report...................................................................................... 1094.2.3.3.2 SGSN Performance Analysis Report .............................................................................. 1124.2.3.3.3 SGSN Nominal Load Report........................................................................................... 115
4.2.3.4 Cisco based GGSN Reports ................................................................................................... 1184.2.3.4.1 APN Performance Report ............................................................................................... 1184.2.3.4.2 GGSN Performance Report............................................................................................ 1184.2.3.4.3 GTP Throughput Report ................................................................................................. 119
4.3 VAS .......................................................................................................................................................... 1204.3.1 MSP ................................................................................................................................................. 121
5 RADIO ACCESS NETWORK ...................................................................................................................1225.1 GERAN..................................................................................................................................................... 122
5.1.1 Base Station Overview Report ......................................................................................................... 1225.1.2 Base Station Ranking Report........................................................................................................... 1275.1.3 Base Station Grade Of Service Report ............................................................................................ 1305.1.4 Base Station Call Setup Analysis Report ......................................................................................... 1365.1.5 Base Station Traffic Flow Report ..................................................................................................... 1385.1.6 Base Station Traffic Report.............................................................................................................. 1405.1.7 Base Station Synthesis Report ........................................................................................................ 1435.1.8 Base Station Handover Overview Report ........................................................................................ 1475.1.9 Base Station Handover Analysis Report .......................................................................................... 1505.1.10 Base Station Outgoing Handover Report....................................................................................... 1535.1.11 Unbalanced Links Report............................................................................................................... 1565.1.12 Base Station GPRS Performance Report ...................................................................................... 1585.1.13 Base Station Interference Band Report ......................................................................................... 1605.1.14 TRX Level And Quality Report ....................................................................................................... 1615.1.15 Base Station Link Quality Report ................................................................................................... 1635.1.16 Correlated Data Histogram Reports............................................................................................... 166
5.2 UTRAN ..................................................................................................................................................... 1685.2.1 UTRAN Overview Report ................................................................................................................. 1685.2.2 Connection Drop per Cause Report................................................................................................. 1715.2.3 RRC Analysis Report ....................................................................................................................... 1735.2.4 RRC Establishment per Cause Report ............................................................................................ 1775.2.5 RAB Analysis Report ....................................................................................................................... 1795.2.6 RAB Failure per Cause Report ........................................................................................................ 1825.2.7 Soft HO Analysis Report .................................................................................................................. 1845.2.8 Branch Addition Failure per Cause Report ...................................................................................... 1885.2.9 Hard HO Analysis Report................................................................................................................. 191
6 REAL-TIME REPORTS...........................................................................................................................1946.1 Bar-Chart Reports Visualization ............................................................................................................... 1956.2 Monitoring Panel Reports Visualization .................................................................................................... 1966.3 CN Circuit Switched Real-Time Reports................................................................................................... 197
6.3.1 MSC Monitoring Panel Report ......................................................................................................... 1976.3.2 EXCH Bar Chart Report................................................................................................................... 1996.3.3 LOCAR Bar Chart Report ................................................................................................................ 2086.3.4 CELL Bar Chart Report.................................................................................................................... 2096.3.5 ANGRP Bar Chart Report ................................................................................................................ 210
6.4 CN Packet Switched Real-Time Reports.................................................................................................. 2116.4.1 BIAS Load Monitoring Panel Report ................................................................................................ 2116.4.2 APN Bar Chart Report ..................................................................................................................... 2136.4.3 CARD Bar Chart Report................................................................................................................... 2146.4.4 VRINDEX Bar Chart Report ............................................................................................................. 2176.4.5 SLOTPORT Bar Chart Report ......................................................................................................... 2196.4.6 DLC Bar Chart Report...................................................................................................................... 2226.4.7 VPL Bar Chart Report ...................................................................................................................... 2236.4.8 VCL Bar Chart Report...................................................................................................................... 2246.4.9 MIB2IFINDEX Bar Chart Report ...................................................................................................... 2256.4.10 VR Bar Chart Report...................................................................................................................... 2276.4.11 RADIUSACC Bar Chart Report...................................................................................................... 2296.4.12 RADIUSAUTH Bar Chart Report.................................................................................................... 2316.4.13 BVC Bar Chart Report ................................................................................................................... 2346.4.14 NSE Bar Chart Report ................................................................................................................... 2356.4.15 NSVC Bar Chart Report................................................................................................................. 2366.4.16 CAPN Bar Chart Report................................................................................................................. 2376.4.17 CMIB2IFINDEX Bar Chart Report.................................................................................................. 238
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 5
6.4.18 CGGSN Bar Chart Report.............................................................................................................. 2406.5 VAS Real-Time Reports ........................................................................................................................... 242
6.5.1 MSP Bar Chart Report ..................................................................................................................... 2436.6 GERAN Real-Time Reports...................................................................................................................... 245
6.6.1 BTS Monitoring Panel Report .......................................................................................................... 2456.6.2 BTS Bar Chart Report...................................................................................................................... 2476.6.3 TRX Bar Chart Report...................................................................................................................... 2556.6.4 BSC Bar Chart Report ..................................................................................................................... 2566.6.5 BTSM Bar Chart Report................................................................................................................... 257
6.7 UTRAN Real-Time Reports ...................................................................................................................... 2586.7.1 UCELL Monitoring Panel Report...................................................................................................... 2586.7.2 RNC Monitoring Panel Report ......................................................................................................... 2606.7.3 UCELL Bar Chart Report ................................................................................................................. 2626.7.4 RNC Bar Chart Report ..................................................................................................................... 2666.7.5 STM1LINE Bar Chart Report ........................................................................................................... 2686.7.6 E1LINE Bar Chart Report ................................................................................................................ 2696.7.7 STM1VP Bar Chart Report .............................................................................................................. 270
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
6 E200301-01-714-V10.0I-01
1 Introduction
1.1 Purpose
The goal of this document is to provide the detailed description of all SPOTS V10.0 Performance Pre-Defined Reports.
The usage of a separate document to describe SIEMENS reports takes into account the fact thatthese reports may evolve faster than the SPOTS infrastructure itself; thus, this solution provides asuitable response to changing customer requirements.
A very large set of pre-defined performance measurement reports covering all technological domains,are provided under the "SIEMENS reports" folder. These are the SIEMENS suggested pre-definedreports, which were developed making use of a large experience supporting network operators all overthe world. They should be considered just as SIEMENS proposals that neither cover every specificaspect of each network nor are thought to be compliant with every operator usual workflow.
Case it is found necessary to extend the functionality of these reports (e.g. customisation for aparticular case), SIEMENS reports can be used as templates to build custom reports. This can bedone using the Reports Editor interface, described within [21], to edit the reports according to thesyntax of the SPOTS reporting language (SRL). The syntax of this language is very simple, butpowerful enough to describe any complex report — for details about SRL please refer to [18].Be aware that, if changes are performed over the original version of the report (i.e. keeping the samereport name), they will be lost upon upgrade to a new SPOTS installation. To avoid this, copy thereport to a different file name after editing it — through this process, any number of versions of a pre-defined report can be created.
Figure 1 – Reports Editor Interface.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 7
1.2 Reference Documents
[01] Training Documentation 1835 : SSS Traffic Measurement
[02] 3GPP TS 52.402 Telecommunication ManagementPerformance Management (PM) – Performance Measurements – GSM
[03] Information – Traffic Data Administration – Traffic Measurement(Siemens Doc A50016-D1108-G801-*-7618)
[04] Information – Traffic Data Administration – Traffic Measurement(Siemens Doc A50016-D1109-G801-*-7618)
[05] Service InformationTraffic Administration and Monitoring the Grade of Service (GOS)
[06] Information – Performance Management(Siemens Doc A50016-D3102-G803-*-7618)
[07] Information – Traffic and Performance Data Counter Description (CS)(Siemens Doc A50016-D1702-G802-*-7618)
[08] Information – System – Performance Management(Siemens Doc A50016-D3102-G803-*-7618)
[09] Information – Traffic and Performance Data Counter Description (PS)(Siemens Doc A50016-D1702-G803-*-7618)
[10] Performance Management (GR3.0/UCR2.0)(Siemens Doc P30308-A9001-A133-*-7659)
[11] Information – Traffic – Traffic Measurement(Siemens Doc A30828-X1133-G410-*-7618)
[12] Information – Traffic – Traffic Measurement(Siemens Doc A30828-X1150-G410-*-7618)
[13] Information – Performance Measurement Counter(Siemens Doc A30308-X3247-G040-*-7618)
[14] Information – PM:SBS Counter(Siemens Doc A30308-X3247-H40-*-7618)
[15] Information – PM:SBS Counter(Siemens Doc A30808-X3247-K40-*-7618)
[16] Performance Measurement SBS Message Flows(Siemens Doc A30808-X3247-G41-2-7618)
[17] UTRAN – Performance Measurement ProcedureUMTS Terrestrial Radio Access Network – TED:PMC(Siemens Doc A50016-G5000-C202-*-7618)
[18] Reports Processing Language – SPOTS V10(SSA Doc E200301-01-314-V10.0I-*)
[19] Information – PM:SBS Key Performance Indicators(Siemens Doc A30808-X3247-A912-*-7618)
[20] UTRAN Key Performance Indicators(MOBNET doc released IUS at 2002-08-02)
[21] User Manual – SPOTS V10(SSA Doc E200301-01-114-V10.0I-*)
[22] Data Model – SPOTS V10(SSA Doc E200301-01-414-V10.0I-*)
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
8 E200301-01-714-V10.0I-01
1.3 Abbreviations
BSC Base Station Controller.BR BSS Release.BSS Base Station System.BTS Base Transceiver Station.CCNC Common Channel Network Control.CP Coordination Processor.CS Circuit Switching.EDGE Enhanced Data rates for GSM Evolution.GERAN GSM and EDGE Radio Access Network (formerly known as BSS).GGSN Gateway GPRS Support Node.GOS Grade Of Service.GPRS General Packet Radio Service.GSM Global System For Mobile Communications.GSS GPRS Sub-System.GR GSS Release.HO Handover.I-RAT Inter-Radio Access Technology.IP Internet Protocol.ISP Internet Service Provider.MP Main Processor; designation of NE platform ("36190") that uses this processor.MSC Mobile Switching Centre.NE Network Element (also referred to as "node" or "network node").PBH Peak Busy Hour.PDCH Packet Data Channel.PM Performance Management.PO Packet-Oriented.PS Packet Switching.QoS Quality of Service.RNC Radio Network Controller.SBS Siemens BSS.SGSN Serving GPRS Support Node.SPBH Sample at PBH.SP Service Processor; designation of NE platform ("XP140") that uses this processor.SPOTS Support for Planning, Operation & Maintenance and Traffic Analysis.SRL SPOTS Reporting Language.SS7 Signalling System No. 7SSNC Signalling System Network Control.TRX Transceiver.UMTS Universal Mobile Telecommunication System.UTRAN UMTS Terrestrial Radio Access Network.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 9
1.4 Definitions
In this chapter several terms frequently used within this document are defined. Please be aware thatsome definitions represent a restriction to the normal use of the term that only applies to the presentdocument.
Abbreviated NameThe performance indicator abbreviated name that will be displayed on the report output. For the KPIsdescribed within [17] and [19], a short KPI name is usually defined and often used as abbreviatedname.
AggregationThe Aggregation field will show how to evaluate for multiple elementary time periods (also calledsample periods or granularity periods). Below are the aggregation criteria:
SPBH TC Peak Sample at Time Coherent Peak Busy Hour for one or more days.The Time Coherent Peak Busy Hour is calculated by evaluating theDetailed data for a group of days, finding the day-profile (i.e. evolution of areference variable throughout the time for one day) corresponding to theaverage day, and finally, obtaining the PBH from that day profile.
SPBH Avg Peak Average of the Sample at Peak Busy Hour for one or more days.
SPBH Max Peak Sample at the Maximum of the Peak Busy Hours for one or more days.
Total Total value for one or more days.
Total DTL Total value for one or more days calculated based on the Detailed data forthose days. The Detailed data corresponds PM raw data.
Total SPBH Total value for one or more days referring only to the Peak Busy Hourresults. Obtained by adding the results of consecutive samples at PeakBusy Hour.
SPBH Daily Peaks Sample at Peak Busy Hour for each day.
DTOT Total value for each day.
TEVL Regular samples providing a time evolution. The granularity of thesamples is defined within the Reports code and is based on the databaseDetailed data.
Auxiliary HeaderSome Performance Indicators can be grouped in the report under certain common information toenable a user-friendly layout. The auxiliary header will give a hint about the performance indicatorsmeaning and can also provide information about the use-case to which is mainly addressed.
Counter NameThe performance measurement counter names according to Siemens counter specificationdocuments: [03], [04], [07], [09], [13], [14], [15] and [17].Different counters can share the same name if provided within different measurement jobs. Therefore,in reports providing performance indicators based on more than one measurement, there is the risk ofhaving multiple meanings for the same counter name. To guarantee unique counter references withinthe reports, counter names can be preceded by the SPOTS measurement name separated by colon,(i.e. <Spots Measurement>:<Counter Name>, for instance "C7LSET:NUM_UNA").The mapping between Siemens counter names and SPOTS counter names, and, the description ofSPOTS measurements, is provided within [22].
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
10 E200301-01-714-V10.0I-01
Date & TimeThe fields on the reports described as "date" and as "Time" provide the date and time correspondingto the end of the granularity period, or, case aggregation of samples is performed, the end time of thelast granularity period included on the result. In order to keep the sample periods ending at 00:00attached to the data from the day before, the time-stamp for these samples is always changed to23:59 at the time of the loading into SPOTS database.
Default valueThe Default Values represent the value assigned to an Input Parameter case the user doesn't defineanother at the time of the report execution. The application will assume a default value because allvalues are mandatory when running the report.
DescriptionThe description will give you a short explanation about the content of the report and its main goals.
Detailed DataThe SPOTS data is organised in two logging tables:
− Detailed Data− Historical Data
The Detailed data is the raw PM data (typically with 15min granularity) stored in the database for alimited period of time, usually two weeks. Please refer also to the definition of Historical Data.
Input ParametersThese parameters define the selection of data that will be shown in the report. Examples of theseparameters are the period of time and the Network Elements (e.g. MSC, BSC, Cell, TRX) to which thedata corresponds, or, the kind of Aggregation that will be made over the time in order to show a singlevalue for each indicator analysed.Some Input Parameters are simply chosen while selecting the report. For instance, the aggregationcriterion is usually chosen by selecting one report variant from a folder named after that same reportand containing several variants each one using a different aggregation criterion.
Elementary ObjectIt means the lowest-level object (in the sense of the SPOTS object containment hierarchy, please referto [22]) for which the performance parameters of the report are evaluated (e.g. BSC, BTS, TRX,NODEB, RNC, UCELL or EXCHANGE).
Historical DataThe SPOTS data is organised in two logging tables:
− Detailed Data− Historical Data
The Detailed data is the raw PM data.The analysis of evolution trends of the PM counters requires observation over long periods of time.The existence of detailed records (usually every 15 minutes) is not appropriate for this type ofanalysis. This would mean keeping in the Database an information volume of an "unacceptable"dimension, both due to the required amount of storage capacity and to the performance degradation inthe access. As an alternative, the significant indicators should be evaluated from the Detailed data andonly those (Historical data) must be kept into the Database for long term.The base period for Historical data creation is the day. These are the significant retrieved from theDetailed data:
− Daily Totals− SPBH Daily Peaks
For more information about Detailed and Historical data, please refer to [21] chapter 1.6 "Internal DataOrganisation".
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 11
KPIKey Performance Indicators. Please refer to [05], [17] and [19].
LayoutThe Layout field of the report descriptions can contain screenshots of the report output, and/or, atemplate table containing the column and the row titles that will be displayed on the report output (boldfont table cells). Additionally the table can also contain the formulas for the indicators (on the whitecells) and any other information that helps to provide a full description of the report concept (light greycells). This other information is usually the performance indicator full name or auxiliary headers forgroups of related performance indicators. Below is the template for the tables used in the descriptions:
Report NameExecution Parameters
Auxiliary HeaderPerformanceIndicator #1 Performance
Indicator #2PerformanceIndicator #3
AbbreviatedName #1
AbbreviatedName #2
AbbreviatedName #3
<Unit> <Unit> <Unit>
Date Time Object
<Threshold>
<Dat
e Fo
rmat
(e.g
. YYY
Y-M
M-D
D)>
<Tim
e Fo
rmat
(e.g
. HH
:mm
)>
<Obj
ect C
lass
ID>
KPI
des
crip
tion
and/
orFo
rmul
a
KPI
des
crip
tion
and/
orFo
rmul
a
KPI
des
crip
tion
and/
orFo
rmul
aNetwork ElementThe entity of the network (e.g. BSC, RNC, MSC or SGSN) to which the measurements are referred.
MeasurementsName of the Siemens scanners or measurement jobs required in order to have available all the dataused by the application to compute the report. For the mapping between the measurements asdefined above and SPOTS measurements, please refer to [22] chapter 2.2 - "Object classes andmeasurements". The list of counters for each SPOTS measurement and the object class to which itapplies, is also provided within [22].
Performance IndicatorCalculations based on performance measurement counters and aiming to provide meaningful resultsfor the performance analysis. A significant part of Performance Indicators used in the performancereports have direct correspondence to key performance indicators which are defined in documents[19] (for GERAN) and [17] (for UTRAN). The exact correspondence to the key performance indicatorsspecified in the Layout columns of each report description. There we can find the key performanceindicators always addressed by their short-name inside < > (e.g.: "<CSSuccRate>" equal to "value ofCSSuccRate"). The Performance Indicators that do not have a direct correspondence to a keyperformance indicator, have their calculation specified in the report layout columns using keyperformance indicators and/or performance measurement counters (which are not inside < > and, inmost cases, are identifiable be a suffix inside brackets, e.g. “NRDEFTCH[3]”).
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
12 E200301-01-714-V10.0I-01
The naming convention for the performance measurement counters and calculations is the same usedand specified in [17] and [19]: For instance, for the used SBS performance measurement counters, theSBS short identification becomes the combination of measurement type and sub-counter. Ameasurement type can have several sub-counters. Therefore the used sub-counters are listed inbrackets with following meaning:
[1] sub-counter 1 has to be taken.[1,2,4] sub-counters 1, 2 and 4 have to be added.[1..4] sub-counters 1, 2, 3 and 4 have to be added.[1..4, 7..10] sub-counters 1, 2, 3, 4, 7, 8, 9 and 10 have to be added.[all] all sub-counters have to be added.
RemarksAdditional information about the report that didn't fit in any other information fields.
Report NameThis is the full name of the described performance report.
Report Short NameThis is a short name for the described performance report. It usually matches reports file names.
Target GroupsThis is the group of users for to which the report is mainly addressed. The following groups weredefined according to their task in the network:
− Network Operation− Network Optimisation− Network Planning− Marketing− Management
ThresholdThe Thresholds are suggested values to enable the comparison of correspondent indicator with areference value.The values assumed in this document are realistic thresholds based also on empirical knowledge andtherefore, in most cases, they can be adopted as the reference value for the respective indicator.Nevertheless they can depend on network configuration and other aspects that are implementationspecific. In those cases, they should be submitted to the appreciation of experts.
UnitThe unit is related to a performance indicator present in the report e.g. number (Nr), percent (%),Erlang (Erl), Erlang Second (Erl.s), second (sec) or minute (min).
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 13
2 PU Load
2.1 Core Network
2.1.1 MP Load Report
Report Name: MP Load Report
Report Short Name: mp
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: Reports the load of the node's main processors sorted by the date/time andthe node’s name.The PBH is evaluated based on "TotalAvgLoad".
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH Node Name
Measurements: VCPU
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
14 E200301-01-714-V10.0I-01
Layout:
MP Load <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
TotalAvgLoad %Load PrhAvg
LoadOamAvg
LoadNrAvgLoad
BaseAvgLoad
CallpAvgLoad
mErl % mErl mErl mErl mErl mErlDate Time Object
YYYY
-MM
-DD
HH
:mm
<NE
Nam
e>
vcpu
00m
pTot
alAv
erag
eLoa
d - v
cpu1
6idl
eAve
rage
Load
(vcp
u00m
pTot
alAv
erag
eLoa
d - v
cpu1
6idl
eAve
rage
Load
) / 1
0
vcpu
02sl
tPrh
Aver
ageL
oad
vcpu
03oa
mAv
erag
eLoa
d
vcpu
06cc
s7N
mAv
erag
eLoa
d
vcpu
17sy
stem
Base
Load
Aver
ageL
oad
vcpu
04ca
llpAv
erag
eLoa
d
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 15
2.1.2 CP Load Report
Report Name: CP Load Report
Report Short Name: cp
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: Reports the load of the NE’s main processors, sorted by date/time and NE’sname.The PBH is evaluated based on "CallPLoad".
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH NE Name
Measurements: CPMSC
Remarks: "Nproc" is the number of available processors with "TotalLoad" greater thanzero and different from NODATA.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
16E200301-01-714-V10.0I-01
Layout:
CP Load <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
TotalLoadCallPLoad
%CallPLoad
CallPFactorSystem
PanelLoad
mErl
mErl
%m
Erlm
ErlDate
Time
Object
<100<670
YYYY-MM-DD
HH:mm
<NE Name>
sum(BAPM.TOTAL INTENSITY, ... , CAP9.TOTAL INTENSITY)
sum(BAPM. CARRIED TRAFFIC, ... , CAP9. CARRIED TRAFFIC)
(<CallP Load> / (670 * <Nproc>)) * 100
Mean CP Load per Processed Call(<CallPLoad> * T) / [(MSC_LD:CALL_ATTEMPTS for MOBILE TRANS TRAFF) +
+ (MSC_LD:CALL_ATTEMPTS for MOBILE OUTG NOT PLMN) ++ (MSC_LD: CALL_ATTEMPTS for MOBILE TERMIN TRAFF) +
+ (MSC_LD: CALL_ATTEMPTS for MOBILE OUTG PLMN)]
Mean Load of Processors in the CP<CallPLoad> / <Nproc>
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 17
2.2 Radio Access Network
2.2.1 BSC Load Report
Report Name: BSC Load Report
Report Short Name: BscLoadReport
Target Groups: Network Operation, Network Optimisation Network Planning.
Description: The purpose of this report is to evaluate the BSC processors load evolutionthroughout the time.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) BSC BSC Symbolic Name
Input Parameters:
(e) AGGREGATION "TEVL""SPBH Daily Peaks"
Measurements: From SCANBSC functional group:BSCPRCLD
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0. Please notethat the list of PCUs is shorter in BR5.5 and doesn't existent in BR5.0.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
18 E200301-01-714-V10.0I-01
Layout:BS
C Lo
ad R
epor
t SPB
HSt
art D
ate: 0
2-02
-200
1En
d Date
: 25-
02-2
001
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 19
2.2.2 NodeB Load Report
Report Name: NodeB Load Report
Report Short Name: NodeBLoadReport
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: The purpose of this report is to provide the evolution of the NodeB Load for aspecified period of time. The following indicators are presented in a chart for-mat: Call Processing Usage Ratio, Base Band Usage Ratio and Rest of CallCapacity.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) NODEB NodeB Symbolic Name
Input Parameters:
(e) AGGREGATION "TEVL""SPBH Daily Peaks"
Measurements: From NodeB:bbUsageRatiocpUsageRatiorestOfCallCapacity
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
20 E200301-01-714-V10.0I-01
Layout:No
deB
Load
Rep
ort S
PBH
Daily
Pea
ksSt
art D
ate: 2
6-02
-200
1 00:0
0En
d Date
: 26-
02-2
001 2
3:00
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 21
2.2.3 RNC Processor Load Report
Report Name: RNC Processor Load Report
Report Short Name: RNCProcLoadReport
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: The purpose of this report is to provide the evolution of the RNC total load andcall-processing load for a specified period of time.The report is presented in chart format.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) RNC RNC Symbolic Name
Input Parameters:
(e) AGGREGATION "TEVL""SPBH Daily Peaks"
Measurements: From RNC:rncUsageRatio
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
22 E200301-01-714-V10.0I-01
Layout:RN
C Pr
oces
sor L
oad
Repo
rt TE
VLSt
art D
ate: 2
6-02
-200
1 00:0
0En
d Date
: 26-
02-2
001 2
3:00
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 23
3 SS7 Surveillance
3.1 CCNC Platforms
3.1.1 CCNC SS7 Switch Surveillance Report
Report Name: CCNC SS7 Switch Surveillance Report
Report Short Name: ccs7_switch_survey
Target Groups: Network Operation, Network Optimisation.
Description: This report is based on data relative to MSUs. It provides per NE the numberof MSUs handled, number of MSUs discarded and discard rate.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"TEVL"
Input Parameters:
(e) EXCH NE Name
Measurements: C7DCDMSUC7MSU
Remarks: None.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
24E200301-01-714-V10.0I-01
Layout:
CCNC SS7 Switch Surveillance <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
TotalMSUsDiscMSUs
%DiscMSUs
NrNr
%Date
Time
Object
YYYY-MM-DD
HH:mm
<NE Name>
Total number of handled MSUs (Incoming + Outgoing + Transit).C7MSU:INCOMING + C7MSU:OUTGOING + C7MSU:TR
Number of MSUs discarded due to routing data errorsC7DCDMSU:TOTAL
Percentage of discarded MSUs<DiscMSUs> / <TotalMSUs> * 100
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 25
3.1.2 CCNC SS7 Route Set Surveillance Report
Report Name: CCNC SS7 Route Set Surveillance Report
Report Short Name: CC7RouteSetSurveillance
Target Groups: Network Operation, Network Optimisation.
Description: This report provides data relative to Route Set failures.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"TEVL"(e) EXCH NE Name
Input Parameters:
(f) RA Route Set Id
Measurements: C7RSET
Remarks: None.
Layout:
CCNC SS7 Route Set Surveillance <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
UnEvents UnDuration %Una
Nr sec %Date Time Object
YYYY
-MM
-DD
HH
:mm
<Rou
te S
et Id
>
Num
ber o
f Rou
te S
et fa
ilure
sC
7RSE
T:N
UM
_UN
A
Sum
of t
he d
urat
ion'
s of
Rou
te S
et fa
ilure
sC
7RSE
T:D
UR
_UN
A
Perc
enta
ge o
f tim
e fo
r whi
ch R
oute
Set
s w
ere
infa
ilure
C7R
SET:
DU
R_U
NA
/ T *
100
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
26 E200301-01-714-V10.0I-01
3.1.3 CCNC SS7 Link Set Surveillance Report
Report Name: CCNC SS7 Link Set Surveillance Report
Report Short Name: ccs7_linkset_survey
Target Groups: Network Operation, Network Optimisation.
Description: This report is based on data referent to unavailability of link sets. A link set isconsidered to be unavailable when the last link in the set goes into state"inactive".
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"TEVL"(e) EXCH NE Name
Input Parameters:
(f) C7LS Link Set Id
Measurements: C7LSET
Remarks: None.
Layout:
CCNC SS7 Link Set Surveillance <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
UnEvents UnDuration %Una
Nr sec %Date Time Object
YYYY
-MM
-DD
HH
:mm
<Lin
k Se
t Id>
Num
ber o
f Lin
k Se
ts o
ut o
f ser
vice
C7L
SET:
NU
M_U
NA
Dur
atio
n fo
r whi
ch L
ink
Sets
wer
e ou
t of s
ervi
ceC
7LSE
T:D
UR
_UN
A
Perc
enta
ge o
f Out
of S
ervi
ce T
ime
C7L
SET:
DU
R_U
NA
/ T *
100
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 27
3.1.4 CCNC SS7 Link Surve illance Report
Report Name: CCNC SS7 Link Surveillance Report
Report Short Name: CC7SwitchSurveillance
Target Groups: Network Operation, Network Optimisation.
Description: This report presents some of the most important signalling link statistics. Itprovides a first overview of the link performance.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"TEVL"(e) EXCH NE Name(f) C7LS Link Set Id
Input Parameters:
(g) C7LINK Link Id
Measurements: C7GOSC7LLOAD
Remarks: None.
Layout:
CCNC SS7 Link Surveillance <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
%InService %Una %Congestion ErrorMSUs
% % % NrDate Time Object
YYYY
-MM
-DD
HH
:mm
<Lin
k Se
t Id>
Perc
enta
ge o
f lin
k av
aila
ble.
C7G
OS:
DU
R_S
LIN
S / T
* 10
0
Perc
enta
ge o
f lin
k un
avai
labl
e.C
7GO
S:D
UR
_SLU
NA
/ T *
100
Perc
enta
ge o
f lin
k co
nges
tion.
C7L
LOAD
:DU
R_L
INK_
CO
N /
T * 1
00
Num
ber o
f MSU
s w
ith e
rror
.C
7GO
S:N
UM
_SU
E
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
28 E200301-01-714-V10.0I-01
3.1.5 CCNC SS7 Link Load Report
Report Name: CCNC SS7 Link Load Report
Report Short Name: ccs7_link_load
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: Reports the load of the SS7 links assuming 64kbit/s links. This report provi-des the fundamental performance indicators for SS7 link dimensioning.The PBH is evaluated based on TotalLoad.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
(e) EXCH NE Name(f) C7LS Link Set id
Input Parameters:
(g) C7LINK Link id
Measurements: C7GOSC7LLOAD
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 29
Layout:
Tota
lLo
ad Erl
max(<TotalTxTrf> , <TotalRxTrf>)
Tota
lRx
Trf
Erl Total Load in the Receiving direction
(C7LLOAD:NUM_MRC * 6 + C7LLOAD:NUM_SSRC) / (8000 * T)
Tota
lTx
Trf
Erl Total Load in the Transmitting direction
(C7LLOAD:NUM_MTR * 6 + C7LLOAD:NUM_SSTR) / (8000 * T)
Rx MSUs
Nr/se
c Number of Received MSUsC7LLOAD:NUM_MRC / T
Tx MSUs
Nr/se
c Number of Transmitted MSUsC7LLOAD:NUM_MTR / T
Rx SSOc
t
Nr Number of Received Information OctetsC7LLOAD:NUM_SSRC
TxSS
Oct
Nr Number of Transmitted Information OctetsC7LLOAD:NUM_SSTR
RetrO
ct
Nr Number of Retransmitted OctetsC7LLOAD:OCT_RET
Tota
lEr
rorM
SUs
Nr Number of Erroed MSUsC7GOS:NUM_SUE
Cong
estio
n
% Percentage of Congested Links100 * C7LLOAD:DUR_LINK_CON / T
Unav
ailab
le
% Percentage of Unavailable Links100 * C7GOS:DUR_SLUNA / T
InSe
rvice
% Percentage of Links in Service100 * C7GOS:DUR_SLINS / T
Objec
t
<Link Id>
Tim
e
HH:mm
CCNC
SS7
Lin
k Loa
d Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
30 E200301-01-714-V10.0I-01
3.2 SSNC Platforms
3.2.1 SSNC SS7 Node Surveillance Report
Report Name: SSNC SS7 Node Surveillance Report
Report Short Name: ss7_node
Target Groups: Network Operation, Network Optimisation.
Description: This report is based on data relative to MSUs. It provides, per NE, the num-ber of MSUs handled, number of MSUs discarded and discard rate.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
Input Parameters:
(e) EXCH NE Name
Measurements: SEMSU
Remarks: None.
Layout:
SSNC SS7 Node Surveillance <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
IncMSUs OutMSUs TransitMSUs TotalMSU DiscMSUs %DiscMSUsNr Nr Nr Nr Nr %Date Time Object
YYYY
-MM
-DD
HH
:mm
<NE
Nam
e>
SEM
SU:n
umIn
MSU
SEM
SU:n
umO
utM
SU
SEM
SU:n
umTr
ansi
tMSU
<Inc
MU
Ss>
+ <O
utM
SUs>
+ <
Tran
sitM
SUs>
SEM
SU:n
umLo
stM
SUR
outE
rr
<Dis
cMSU
s> /
<Tot
alM
SUs>
* 10
0
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 31
3.2.2 SSNC SS7 Sign Point Surveillance Report
Report Name: SSNC SS7 Sign Point Surveillance Report
Report Short Name: ss7_spoint
Target Groups: Network Operation, Network Optimisation.
Description: This report provides performance data related to SS7 signalling points concer-ning the inaccessibility of adjacent points and the number of discarded MSUs.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"TEVL"(e) EXCH NE Name
Input Parameters:
(f) MTPSP MTP Signalling Point Id
Measurements: SPMSUSPUTL
Remarks: None.
Layout:
SSNC SS7 Sign Point Surveillance <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
AdjInacEvents AdjInacDuration %AdjInac DiscMSUs
Nr sec % NrDate Time Object
YYYY
-MM
-DD
HH
:mm
<MTP
Sig
nallin
g Po
int I
d>
SPU
TL:a
djac
entIn
acce
ssib
leEv
ents
SPU
TL:a
djac
entIn
acce
ssib
leD
urat
ion
<Adj
Inac
Dur
atio
n> /
T * 1
00
SPM
SU:d
isca
rded
MSU
s
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
32 E200301-01-714-V10.0I-01
3.2.3 SSNC SS7 Route Set Surveillance Report
Report Name: SSNC SS7 Route Set Surveillance Report
Report Short Name: ss7_route
Target Groups: Network Operation, Network Optimisation.
Description: This report provides data relative to Route Set failures.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"TEVL"(e) EXCH NE Name(f) MTPSP MTP Service Point Id
Input Parameters:
(g) SRSNP Route Set Id
Measurements: RSINF
Remarks: None.
Layout:
SSNC SS7 Route Set Surveillance <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
UnEvents UnDuration %Una
Nr sec %Date Time Object
YYYY
-MM
-DD
HH
:mm
<Rou
te S
et Id
>
RSI
NF:
rout
eSet
Una
vaila
ble
RSI
NF:
rout
eSet
Una
vaila
bleD
urat
ion
<UnD
urat
ion>
/ T
* 100
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 33
3.2.4 SSNC SS7 Link Set Surveillance Report
Report Name: SSNC SS7 Link Set Surveillance Report
Report Short Name: ss7_linkset
Target Groups: Network Operation, Network Optimisation.
Description: This report concerns indicators referent to unavailability of link sets. Further-more, it provides also per link set, other indicators related with the links load.A link set is considered to be unavailable when the last link in the set goesinto state "inactive".The SUM operation should be done over all signalling links belonging to thesame link set.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"TEVL"(e) EXCH NE Name(f) MTPSP MTP Service point Id
Input Parameters:
(g) SLS Link Set Id
Measurements: LSDURSLUTL
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
34 E200301-01-714-V10.0I-01
Layout:
Disc
arde
dMS
Us Nr sum(SLUTL:discardedMSUs)
Retra
nsm
itted
Octe
ts
Nr sum(SLUTL:retransmittedOctets)Ou
tMSU
s
Nr/se
c
sum(SLUTL:transmittedMSUs)/T
IncM
SUs
Nr/se
c
sum(SLUTL:receivedMSUs)/T
OutS
IFSI
Os
Nr sum(SLUTL:transmittedOctectsSIFSIO)
IncS
IFSI
Os
Nr sum(SLUTL:receivedOctectsSIFSIO)
%Un
a
% <UnDuration> / T * 100
UnDu
ratio
n
Nr LSDUR:slsUnavailable
UnEv
ents
Nr LSDUR:numLinkSetNotAvail
Objec
t
<Link Set Id>
Tim
e
HH:mm
SSNC
SS7
Lin
k Set
Sur
veilla
nce R
epor
t <AG
GREG
ATIO
N>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 35
3.2.5 SSNC SS7 Link Surve illance Report
Report Name: SSNC SS7 Link Surveillance Report
Report Short Name: ss7_link
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: This report provides performance indicators concerning the SS7 links load.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"TEVL"(e) EXCH NE Name(f) MTPSP MTP Service point Id(g) SLS Link Set Id
Input Parameters:
(h) SL Link Id
Measurements: SLCNGSLDURSLUTL
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
36 E200301-01-714-V10.0I-01
Layout:
%Co
nges
tion
% <CongestionDuration> / T * 100
Cong
estio
nDu
ratio
n
sec SLCNG:slCongestionDuration
Cong
estio
nEv
ents
Nr SLCNG:slCongestedStarts
Disc
arde
dMS
Us Nr SLUTL:discardedMSUs
Retra
nsm
itted
Octe
ts
Nr SLUTL:retransmittedOctets
Out
MSUs
Nr/se
c
SLUTL:transmittedMSUs/T
Inc
MSUs
Nr/se
c
SLUTL:receivedMSUs/T
Out
SIFS
IOs
Nr SLUTL:transmittedOctectsSIFSIO
Inc
SIFS
IOs
Nr SLUTL:receivedOctectsSIFSIO
%Un
a
% SLDUR:slUnavailableDuration / T * 100
UnEv
ents
Nr SLDUR:slFailed
%In
Serv
ice
Nr SLDUR:slInServiceDuration / T * 100
Objec
t
<Link Id>
Tim
e
HH:mm
SSNC
SS7
Lin
k Sur
veilla
nce <
AGGR
EGAT
ION>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 37
4 Core Network
4.1 CS
4.1.1 TGRP Load Report
Report Name: TGRP Load Report
Report Short Name: tgrp_load
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: Reports the load of the trunkGroups providing useful information both fordimensioning and for troubleshooting. Basic indicators like Mean HoldingTimes, Answer Seizure Ratios, Traffic Offered and Loss, are provided in thisreport.The PBH is evaluated based on "TGRPLoad = (TV:I + TV:O)".
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL""DTOT"
(e) EXCH NE Name
Input Parameters:
(f) TGRP TGRP Name
Measurements: TGRP
Remarks: – For incoming trunks, TV:IC=0;– For outgoing trunks, TV:O=0
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
38 E200301-01-714-V10.0I-01
Layout 1:
MHT
sec
>40 Mean Holding Time of Carried Calls
(TV:I + TV:O) / <CallsCarr>
ASR % >60 Answer Seizure Ratio of Carried Calls
<CallsCarrWthAns> / <CallsCarr> * 100Ca
llsCa
rrW
thAn
s
Nr Calls Carried With AnswerCCS_WITH_ANSWER:I + CCS_WITH_ANSWER:O
Calls
Carr
Nr Calls CarriedCC:I + CC:O
Loss % <0.1 Erlang B Loss
calcLoss(<TrafCarr>, <ServLines>) * 100Using ERLANG-B formula.
Traf
PerL
ine
Erl Traffic Carried per Line
<TrafCarr> / <ServLines>
Traf
Carr
Erl Traffic Carried
(TV:I + TV:O) / T
Traf
Off
Erl Traffic Offered
<TrafCarr> / (1 - (<Loss> / 100))
Req
Line
s
Nr
Number of Required LinescalcTrunks(<TrafCarr>, AdmissibleLoss)
Uses ERLANG-B formula with AdmissibleLoss=0.1%
Serv
Line
s
Nr
Number of Lines in ServiceIf (<ConnLines> >= <BlockLines>) then (<ConnLines> - <BlockLines>)
else 0where <BlockLines> = (TV_TRANS_BLOLI + TV_SEMI_BLOLI) / T
Conn
Line
s
Nr Connected LinesCONNECTED_LINES
Objec
t
<TGRP Name>
Tim
e
HH:mm
TGRP
Loa
d MA
X_SP
BH / S
PBH
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 39
Layout 1 (cont):
CSCo
nges
tion
Nr
Calls released after trunk group seizure becausethe backward signal "congestion" was received from
downstream exchangesCS_CONG
CSSu
mTe
chIrr
Nr
Calls released after trunk seizure due to technicalirregularities
CCS_EXT_TECHN_IRREG + CCS_INT_TECHN_IRREG ++ CCS_RELORIG_ENDTOEND + CCS_LINK_FAILURE
CSSu
mSu
b
NrCalls released after trunk seizure due to Subscriber
irregularitiesCCS_INCMP_DIAL + CCS_SUB_BUSY +
+ CCS_UNANSWERED + CCS_UNALL_NUM
CSCC
S7Fa
il
Nr
Calls failed after trunk group seizure because of releasesignal reception
CCS_CCS7_CALL_FAIL
CULo
stCa
lls
Nr Unsuccessful Calls offered to alternative routesCCU_LOST_CALLS
OutC
alls
CarrU
ns
Nr
Unsuccessful Outgoing Calls; includes Calls rejected inthe first and in the alternative routes
CCU_SUM_OFL/LOSS
OutC
alls
CarrW
thAn
s
Nr Outgoing Calls Carried With AnswerCCS_WITH_ANSWER:O
OutC
alls
Carr Nr Outgoing Calls Carried
CC:O
IncC
alls
CarrW
thAn
s
Nr Incoming Calls Carried With AnswerCCS_WITH_ANSWER:I
IncC
alls
Carr Nr Incoming Calls Carried
CC:I
Objec
t
<TGRP Name>
Tim
e
HH:mm
TGRP
Loa
d MA
X_SP
BH / S
PBH
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
40 E200301-01-714-V10.0I-01
Layout 2:
Tran
sBlk
Line
s
Nr Transiently Blocked LinesTV_TRANS_BLOLI / T
Sem
iBlk
Line
s
Nr Semi Blocked LinesTV_SEMI_BLOLI / T
Out
ASR % >60 Answer Seizure Ratio of Outgoing Calls
(CCS_WITH_ANSWER:O / CC:O) * 100
Inc
ASR % >60 Answer Seizure Ratio of Incoming Calls
(CCS_WITH_ANSWER:I / CC:I) * 100
Out
MHT
sec
>40 Mean Holding Time of Outgoing Calls
TV:O / CC:O
Inc
MHT
sec
>40 Mean Holding Time of Incoming Calls
TV:I / CC:I
ATBR % <0.1 Relative time for which all trunks were blocked
(ATB_TIME / T) * 100
OutC
alls
CarrU
ns
Nr Outgoing Calls Caried UnsuccessfulCCU_SUM_OFL/LOSS
OutC
alls
Carr Nr Outgoing Calls Carried
CC:O
IncC
alls
CarrU
ns
Nr Incoming Calls Carried Unsuccessful<CA_IC> - CC:I
IncC
alls
Carr Nr Incoming Calls CarriedCC:I
OutT
raf
Carr
Erl Outgoing Traffic Carried
TV:O / T
IncT
raf
Carr
Erl Incoming Traffic Carried
TV:I / T
Serv
Line
s
Nr
Number of Lines in ServiceIf (<ConnLines> >= <BlockLines>) then (<ConnLines> - <BlockLines>)
where <BlockLines> = (TV_TRANS_BLOLI + TV_SEMI_BLOLI) / T
Conn
Line
s
Nr Connected LinesCONNECTED_LINES
Objec
t
<TGRP Name>
Tim
e
HH:mm
TGRP
Loa
d DT
OTSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-0141
Layout 3:
TGRP Load TEVLStart Date: <START_DATE>
End Date: <END_DATE>
CallsCarrCallsCarrW
ithAnsATBR
ASRMHT
NrNr
%%
secDate
Time
Object
<0.1>60
>40
YYYY-MM-DD
HH:mm
<TGRP Name>
Calls CarriedCC:I + CC:O
Calls Carried With AnswerCS_WA_IC + CS_WA_OO
Relative time for which all trunks were blocked(ATB_TIME / T) * 100
Answer Seizure Ratio of Carried Calls<CallsCarrWthAns> / <CallsCarr> * 100
Mean Holding Time of Carried Calls(TV:I + TV:O) / <CallsCarr>
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
42 E200301-01-714-V10.0I-01
4.1.2 TGRP Load Type Report
Report Name: TGRP Load Type Report
Report Short Name: tgrp_load_type
Target Groups: Network Optimisation.
Description: Report the incoming and outgoing load of the trunkGroups at the peak hour.Basic indicators like Mean Holding Times, Answer Seizure Ratios, TrafficCarried and Blocking, are provided in this report per load type, namely,incoming and outgoing.The PBH is evaluated based on "TGRPLoad = (TV:I+TV:O).
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks"(e) EXCH NE Name
Input Parameters:
(f) TGRP TGRP Name
Measurements: TGRP
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 43
Layout:
Tran
sBl
kLi
nes
Nr Transiently Blocked LinesTV_TRANS_BLOLI / T
Sem
iBl
kLi
nes
Nr Semi Blocked LinesTV_SEMI_BLOLI / T
ATBR % <0.1 Relative time for which all trunks were blocked
(ATB_TIME / T) * 100
Bloc
kFa
ctor
% <0.1 Blocking Factor
<B_BW>
Out
MHT
sec
>40 Mean Holding Time of Outgoing Calls
TV:O / CC:O
Out
ASR % >60 Answer Seizure Ratio of Outgoing Calls
(CCS_WITH_ANSWER:O / CC:O) * 100
Out
Calls
Carr
Uns
Nr Outgoing Calls Carried UnsuccessfulCCU_SUM_OFL/LOSS
Out
Calls
Carr Nr Outgoing Calls Carried
CC:O
Out
Call
Att Nr Outgoing Call Attempts
CC:O + CCU_SUM_OFL/LOSS
Inc
MHT
sec
>40 Mean Holding Time of Incoming Calls
TV:I / CC:I
Inc
ASR % >60 Answer Seizure Ratio of Incoming Calls
(CCS_WITH_ANSWER:I / CC:I) * 100
Inc
Calls
Carr
Uns
Nr Incoming Calls Carried Unsuccessful<CA_IC> - CC:I
Inc
Calls
Carr Nr Incoming Calls Carried
CC:I
Inc
CallA
tt
Nr
Incoming Call Attempts<CA_IC> = CC:I / (1 - (<B_BW> / 100))
where <B_BW> = (<TO_BW> - <TC_BW>) / <TO_BW> * 100;<TC_BW> = (TV:I + TV:O) / T;
<TO_BW> = ( <TC_BW>) / (1 - calcLoss(<TC_BW>, ServLines))
Out
Traf
Carr
Erl Outgoing Traffic Carried
TV:O / T
Inc
Traf
Carr
Erl Incoming Traffic Carried
TV:I / T
Serv
Line
s
Nr
Number of Lines in ServiceIf (<ConnLines> >= <BlockLines>) then (<ConnLines> - <BlockLines>)
where <BlockLines> = (TV_TRANS_BLOLI + TV_SEMI_BLOLI) / T
Conn
Line
s
Nr Connected LinesCONNECTED_LINES
Objec
t
<TGRP Name>
Tim
e
HH:mm
TGRP
Loa
d Ty
pe R
epor
t <AG
GREG
ATIO
N>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
44 E200301-01-714-V10.0I-01
4.1.3 Dest Report
Report Name: Dest Report
Report Short Name: dest
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: Reports the load per Destination Directory Number. This report provides basicindicators like Mean Holding Times, Answer Seizure Ratios, Calls Carried andCalls Unsuccessful.The PBH is evaluated based on CallsCarr.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
(e) EXCH NE Name
Input Parameters:
(f) ODEST Destination DirectoryNumber
Measurements: DEST
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 45
Layout 1:
Rejec
tedC
alls
Nr
Rejected Calls, sum of unsuccessful calls due to:- congestion or subscriber busy in the own exchange
(CCU_CONGESTION);- network management action (CCU_NM_CODE_BLOCKING);
- lack of authorisation to access the outgoing trunk group(CCU_NM_TRUNK_BLOCKING);
- internal blocking in the SN (CCU_TECHN_IRREGULAR)CCU_CONGESTION + CCU_NM_CODE_BLOCKING +
CCU_NM_TRUNK_BLOCKING + CCU_TECHN_IRREGULAR
Calls
Tech
Irreg
NrCalls terminated after connection through the SN due to technical
faults in the external exchange and in the own exchangeCCS_EXT_TECHN_IRREG + CCS_INT_TECHN_IRREG
Calls
Subs
Busy
Nr Calls With Subscriber BusyCCS_SUB_BUSY
Calls
Wth
NoAn
s
Nr Calls With No AnswerCCS_UNANSWERED
Calls
Wth
IncD
ial
Nr Calls With Incomplete DiallingCCS_INCMP_DIAL
MHT
Wth
Ans
sec
>60 Mean Holding Time of Calls With Answer
TV_WITH_ANSWER / CCS_WITH_ANSWER
MHT
sec
>40 Mean Holding Time
TV / CC
ASR % >60 Answer Seizure Ratio
CCS_WITH_ANSWER / CC * 100
Traf
CW
thAn
s
Erl Traffic Carried for Calls With Answer
TV_WITH_ANSWER / T
Traf
Carr
Erl Traffic Carried
TV / T
Calls
CW
thAn
s
Nr Calls Carried With AnswerCCS_WITH_ANSWER
Calls
Carr Nr Calls Carried
CC
Objec
t
<Destination Directory Number>
Tim
e
HH:mm
Dest
Rep
ort M
AX_S
PBH
/ SPB
HSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
46E200301-01-714-V10.0I-01
Layout 2:
Dest Report DAILY / DETAILEDStart Date: <START_DATE>
End Date: <END_DATE
CallsCarrCallsC
WthAns
TrafCarrTrafC
WthAns
ASRMHT
MHTW
thAns
NrNr
ErlErl
%sec
secDate
Time
Object
>60>40
>60
YYYY-MM-DD
HH:mm
<Destination Directory Number>
Calls CarriedCC
Calls Carried With AnswerCCS_WITH_ANSWER
Traffic CarriedTV / T
Traffic Carried for Calls With AnswerTV_WITH_ANSWER / T
Answer Seizure RatioCCS_WITH_ANSWER / CC * 100
Mean Holding TimeTV / CC
Mean Holding Time of Calls With AnswerTV_WITH_ANSWER / CCS_WITH_ANSWER
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 47
4.1.4 Flow Report
Report Name: Flow Report
Report Short Name: flow
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: Reports the load per pair Destination Directory Number - Originating Code.This report provides basic indicators like Mean Holding Times, Answer SeizureRatios, Calls Carried and Calls Unsuccessful.The PBH is evaluated based on CallsCarr.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
(g) EXCH NE Name(h) ODEST Destination Directory
Number
Input Parameters:
(i) OFLOW Originating Code
Measurements: FLOW
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
48 E200301-01-714-V10.0I-01
Layout 1:
Rejec
tedC
alls
Nr
Rejected Calls, sum of unsuccessful calls due to:- congestion or subscriber busy in the own exchange
(CCU_CONGESTION);- network management action (CCU_NM_CODE_BLOCKING);
- lack of authorisation to access the outgoing trunk group(CCU_NM_TRUNK_BLOCKING);
- internal blocking in the SN (CCU_TECHN_IRREGULAR)CCU_CONGESTION + CCU_NM_CODE_BLOCKING +
CCU_NM_TRUNK_BLOCKING + CCU_TECHN_IRREGULAR
Calls
Tech
Irreg
NrCalls terminated after connection through the SN due to technical
faults in the external exchange and in the own exchangeCCS_EXT_TECHN_IRREG + CCS_INT_TECHN_IRREG
Calls
Subs
Busy
Nr Calls With Subscriber BusyCCS_SUB_BUSY
Calls
Wth
NoAn
s
Nr Calls With No AnswerCCS_UNANSWERED
Calls
Wth
IncD
ial
Nr Calls With Incomplete DiallingCCS_INCMP_DIAL
MHT
Wth
Ans
sec
>60 Mean Holding Time of Calls With Answer
TV_WITH_ANSWER / CCS_WITH_ANSWER
MHT
sec
>40 Mean Holding Time
TV / CC
ASR % >60 Answer Seizure Ratio
CCS_WITH_ANSWER / CC * 100
Traf
CW
thAn
s
Erl Traffic Carried for Calls With Answer
TV_WITH_ANSWER / T
Traf
Carr
Erl Traffic Carried
TV / T
Calls
CW
thAn
s
Nr Calls Carried With AnswerCCS_WITH_ANSWER
Calls
Carr Nr Calls Carried
CC
Objec
t
<Originating Code>
Tim
e
HH:mm
Flow
Rep
ort M
AX_S
PBH
/ SPB
HSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-0149
Layout 2:
Flow Report DAILY / DETAILEDStart Date: <START_DATE>
End Date: <END_DATE
CallsCarrCallsC
WthAns
TrafCarrTrafC
WthAns
ASRMHT
MHTW
thAnsNr
NrErl
Erl%
secsec
DateTim
eObject
>60>40
>60
YYYY-MM-DD
HH:mm
<Originating Code>
Calls CarriedCC
Calls Carried With AnswerCCS_WITH_ANSWER
Traffic CarriedTV / T
Traffic Carried for Calls With AnswerTV_WITH_ANSWER / T
Answer Seizure RatioCCS_WITH_ANSWER / CC * 100
Mean Holding TimeTV / CC
Mean Holding Time of Calls With AnswerTV_WITH_ANSWER / CCS_WITH_ANSWER
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
50 E200301-01-714-V10.0I-01
4.1.5 PBX Load Report
Report Name: PBX Load Analysis Report
Report Short Name: pbx
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: Reports the load of the PBXs providing useful information for dimensioningand for troubleshooting. Basic indicators like Mean Holding Times, AnswerSeizure Ratios, Traffic Offered and Loss, are provided in this report.The PBH is evaluated based on "PBXLoad = (TV:I + TV:O)".
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks"(e) EXCH NE Name
Input Parameters:
(f) PBXDN PBX Directory Number
Measurements: PBXD
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 51
Layout:
CURe
jCa
lls Nr 0 Number of unsuccessful attempts in the CP to seize the trunk groupCCU:O
Calls
AnsO
ut
Nr Outgoing Calls With AnswerCCS ANSWER:O
Calls
Out
Nr Outgoing CallsCC:O
Calls
AnsIn
c
Nr Incoming Calls With AnswerCCS ANSWER:I
Calls Inc Nr Incoming Calls Carried
CC:I
MHT
sec
>40 Mean Holding Time of Carried Calls
(TV:I + TV:O) / <CallsCarr>
ASR % >60 Answer Seizure Ratio
<CallsCWthAns> / <CallsCarr> * 100
Calls
Carr
Wth
Ans
Nr Calls Carried With AnswerCCS ANSWER:I + CCS ANSWER:O
Calls
Carr Nr Calls Carried
CC:I + CC:O
Loss % <0.1 Erlang B Loss
calcLoss(<TrafCarr>, <ServLines>) * 100Using ERLANG-B formula.
Traf
Per
Line Erl Traffic Carried per Channel
<TrafCarr> / <ServLines>
Traf
Carr
Erl Traffic Carried
(TV_IC + TV_OO)/T
Traf Off
Erl Traffic Offered
<TrafCarr> / (1 - (<Loss> / 100))
Req
Line
s
Nr
Number of Required LinescalcTrunks(<TrafCarr>, <AdmissibleLoss>)
Using ERLANG-B formula with AdmissibleLoss=0.1%
Serv
Line
s
Nr
Channels in ServiceIf (<ConnLines> >= <BlockLines>) then (<ConnLines> - <BlockLines>)
where <BlockLines> = SEMI_BLOCKED_CHANNELS ++ TRANS_BLOCKED_CHANNELS
Conn
Line
s
Nr Connected LinesCONNECTED_CH
Objec
t
<PBX Directory Number>
Tim
e
HH:mm
PBX
Load
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
52 E200301-01-714-V10.0I-01
4.1.6 PBX Service Load Report
Report Name: PBX Service Load Report
Report Short Name: pbxs
Target Groups: Network Optimisation.
Description: Reports the load per PBX service. This report provides basic indicators likeMean Holding Times, Answer Seizure Ratios, Calls Carried and TrafficCarried.The PBH is evaluated based on "PbxServiceLoad = (TV_IC+TV_OO)".
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks"(e) EXCH NE Name
Input Parameters:
(f) PBXS PBX Directory Nr,concatenated with theService Id
Measurements: PBXS
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 53
Layout:
Out
MHT
Wth
Ans
sec
>60 Mean Holding Time of Carried Outgoing Calls With Answer
TV ANSWER:O / CS_WAOO
Out
MHT
sec
>40 Mean Holding Time of Carried Outgoing Calls
TV:O / CC:O
Out
ASR % >60 Answer Seizure Ratio of Carried Outgoing Calls
CS_WAOO / CC:O * 100Ou
tCa
llsCa
rr Nr Outgoing Calls CarriedCC:O
Out
Traf
Carr
Erl Outgoing Traffic Carried
TV:O / T
Inc
MHT
Wth
Ans
sec
>60 Mean Holding Time of Carried Incoming Calls With Answer
TV ANSWER:I / CCS ANSWER:I
Inc
MHT
sec
>40 Mean Holding Time of Carried Incoming Calls
TV:I / CC:I
Inc
ASR % >60 Answer Seizure Ratio of Carried Incoming Calls
CCS ANSWER:I / CC:I * 100
Inc
Calls
Carr Nr Incoming Calls Carried
CC:I
Inc
Traf
Carr
Erl Incoming Traffic Carried
TV:I / T
MHT
Wth
Ans
sec
>60 Mean Holding Time of Carried Calls With Answer
(TV ANSWER:I + TV ANSWER:O) / <CallsCWthAns>
MHT
sec
>40 Mean Holding Time of Carried Calls
(TV:I+TV:O) / <CallsCarr>
ASR % >60 Answer Seizure Ratio
<CallsCWthAns> / <CallsCarr> * 100
Calls
CW
thAn
s
Nr Calls Carried With AnswerCS_WAIC + CCS ANSWER:O
Calls
Carr Nr Calls Carried
CC:I + CC:O
Traf
CW
thAn
s
Erl Traffic Carried With Answer
(TV ANSWER:I + TV ANSWER:O) / T
Traf
Carr
Erl Traffic Carried
(TV:I + TV:O) / T
Objec
t
<PBX Directory Number>
Tim
e
HH:mm
PBX
Serv
ice L
oad
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
54 E200301-01-714-V10.0I-01
4.1.7 MSC VLR Surveillance
4.1.7.1 MSC Grade of Service Report
Report Name: MSC Grade of Service Report
Report Short Name: MscGosReport
Target Groups: Network Operation, Network Optimisation, Marketing & Management.
Description: This report provides an overview of some of the most meaningful indicatorsrelated with the MSC performance and Grade Of Service.In detail it provides the success rates for the most important GSM proce-dures, namely Call Setup, Handover, Location Update, Paging and ShortMessage Service. It also provides Load/Overload indicators that are relatedwith the load of the MSC processors. Furthermore it also provides severalfailure rates referring to different reasons for Call Setup failure.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: CPMSCVLR
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 55
Layout:
SMS
smsS
R
%
100 * ((MSC_SMS:SUCC_SMS_INC + MSC_SMS:SUCC_SMS_OTG) // (MSC_SMS:SMS_INC_ATTEMPTS ++ MSC_SMS:SMS_OTG_ATTEMPTS))
PAG
pagS
R
% >90 100 * (MSC_GOSSCE:RECEIVED_PAG_RESP [MTER] /
/ MSC_LD:STARTED_PAGING_PROC [MTER])LU
P
lupS
R
% >95 100 * (VLR_LGOS:SUCC_REQUESTS_LOCUPD +
+ VLR_LGOS:SUCC_LOCUPD_WITH_IMSI_ATTACH) // VLR_LGOS:REQUESTS_LOCUPD
HO hoSR % >85
100 * (MSC_HO:SUCC_COMPLETED_HO ++ MSC_HO:SUCC_MSC_MSC_HO_MSCA +
+ MSC_HO:SUCC_MSC_MSC_HO_MSCB ++ MSC_HO:SUCC_SUBSEQ_MSC_MSC_HO_MSCB ++ MSC_HO:SUCC_HO_SEC_MSC_MSC_HO_MSCB) /
/ (MSC_HO:HANDOVER_ATTEMPTS ++ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:HANDOVER_MSC_MSC_IC_ATTEMPTS)
MTC
mtc
SR % >95
100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MTER] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MTER] +
+ MSC_GOSUC:UNS_MS_BUSY [MTER] ++ MSC_GOSSCE:CALL_REL_ALERT [MTER] +
+ MSC_GOSSCE:CALL_REL_BEF_ALERT [MTER] ++ MSC_GOSSCE:CALL_END_CALL_FORW [MTER] +
+ MSC_GOSUC:UNS_MS_BLOCKED [MTER]) // MSC_LD:CALL_ATTEMPTS [MTER]
MOC
(PLM
N)
plm
nMoc
SR
% >95
100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGPL] +MSC_GOSAC:BS_REL_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:CALL_REL_A_ALERT [MOGPL] ++ MSC_GOSCE:CALL_TI_OUT_ALERT [MOGPL] +
+ MSC_GOSCE:CALL_REL_BEF_A_ALERT [MOGPL] ++ MSC_GOSUC:UNS_MS_BUSY [MOGPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGPL]
Succ
ess R
ates
MOC
(PST
N)
pstn
MocS
R
% >95
100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:TS11_EMERG_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:TS12_EMERG_WITH_ANSWER [MOGNPL] +
+ MSC_GOSSCE:CALL_REL_A_ALERT [MOGNPL] ++ MSC_GOSSCE:CALL_TIOUT_ALERT [MOGNPL] +
+ MSC_GOSSCE:CALL_REL_BEF_A_ALERT [MOGNPL] ++ MSC_GOSUC:UNS_MS_BUSY [MOGNPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGNPL]
Objec
t
<NE Name>
Tim
e
HH:mm
MSC
Grad
e Of S
ervic
e Rep
ort <
AGGR
EGAT
ION>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
56 E200301-01-714-V10.0I-01
Layout (cont):
TCH
Cong
estio
n(M
TC)
mtc
TchC
on
% <5 100 - 100 * MSC_GOSSCE:CALL_TCH_ALLOCATION [MTER] // MSC_LD:GEN_TRAFF_CHAN_REQ [MTER]
TCH
Cong
estio
n(M
OC)
moc
TchC
on
% <5
100 - 100 * (MSC_GOSSCE:CALL_TCH_ALLOCATION [MOGNPL] ++ MSC_GOSSCE:CALL_TCH_ALLOCATION [MOGPL]) /
/ (MSC_LD:GEN_TRAFF_CHAN_REQ [MOGNPL] ++ MSC_LD:GEN_TRAFF_CHAN_REQ [MOGPL])
BSSA
PCo
nges
tion
(MTC
)
mtc
Bssa
pCon
% 0 100 * (MSC_GOSUC:UNS_CONGESTION [MTER] // MSC_LD:CALL_ATTEMPTS [MTER])
BSSA
PCo
nges
tion
(MOC
)
moc
Bssa
pCon
% 0
100 * ((MSC_GOSUC:UNS_CONGESTION [MOGNPL] ++ MSC_GOSUC:UNS_CONGESTION [MOGPL]) /
/ (MSC_LD:CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:CALL_ATTEMPTS [MOGPL]))
BSSA
POv
erloa
d(M
TC)
mtc
Bssa
pOvl
% 0 100 * (MSC_GOSUC:UNS_OVERLOAD [MTER] // MSC_LD:CALL_ATTEMPTS [MTER]
BSSA
POv
erloa
d[M
ICTR
]
mic
Bssa
pOvl
% 0 100 * MSC_GOSUC:UNS_OVERLOAD [MICTR] // MSC_LD:CALL_ATTEMPTS [MICTR]
BSSA
POv
erloa
d(M
ORTR
)
moc
Bssa
pOvl
% 0 100 * MSC_GOSUC:UNS_OVERLOAD [MORTR] // MSC_LD:CALL_ATTEMPTS [MORTR
cpLo
ad
% <100 (CP:CARRIED TRAFFIC[BAPM] + CP:CARRIED TRAFFIC[BAPS] +
+ CP:CARRIED TRAFFIC[CAP1] + ... + CP:CARRIED TRAFFIC[CAPn]) // (6.7 * #Processors)
CP Lo
ad
cpLo
adpe
rPro
c
mEr
l
<700
(CP:CARRIED TRAFFIC[BAPM] + CP:CARRIED TRAFFIC[BAPS] ++ CP:CARRIED TRAFFIC[CAP1] + ... + CP:CARRIED TRAFFIC[CAPn]) /
/ #Processors
Call S
etup
Time
cSet
Tim
e
sec <6 MSC_TD:TIME_CALL_SET_U_SERV /
/ MSC_TD:NUM_CALL_SET_UP_CONTRIB
Objec
t
<NE Name>
Tim
e
HH:mm
MSC
Grad
e Of S
ervic
e Rep
ort <
AGGR
EGAT
ION>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 57
Layout (cont):
Relea
seBe
fore
ACM
relB
efAC
M % <1 100 * MSC_GOSUC:REL_BEFORE_ACM [MICTR] // MSC_LD:CALL_ATTEMPTS [MICTR]
Proto
col
Erro
r(M
TC)
mtc
Prot
oErr
% <1 100 * MSC_GOSUC:UNS_PROTO_ERR [MTER] // MSC_LD:CALL_ATTEMPTS [MTER]
Proto
col
Erro
r(M
OC)
moc
Prot
oErr
% <1
100 * (MSC_GOSUC:UNS_PROTO_ERR [MOGNPL] ++ MSC_GOSUC:UNS_PROTO_ERR [MOGPL]) /
/ (MSC_LD:CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:CALL_ATTEMPTS [MOGPL])
Servi
ceCh
eck
(MTC
)
mtc
SvcC
hk
% <1 100 * MSC_GOSUC:UNS_SERV_CHECK [MTER] // MSC_LD:CALL_ATTEMPTS [MTER
Servi
ceCh
eck
(MOC
)
moc
SvcC
hk
% <1100 * (MSC_GOSUC:UNS_SERV_CHECK [MOGPL] +
+ MSC_GOSUC:UNS_SERV_CHECK [MOGNPL]) // (MSC_LD:CALL_ATTEMPTS [MOGNPL] +
+ MSC_LD:CALL_ATTEMPTS [MOGPL])
Base
Stat
ioRe
ason
(MTC
)
mtc
BSRe
as
% <1 100 * MSC_GOSUC:UNS_BS_REASON [MTER]// MSC_LD:CALL_ATTEMPTS [MTER]
Base
Stat
ionRe
ason
(MOC
)
moc
BSRe
as
% <1
100 * (MSC_GOSUC:UNS_BS_REASON [MOGNPL] ++ MSC_GOSUC:UNS_BS_REASON [MOGPL]) /
/ (MSC_LD:CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:CALL_ATTEMPTS [MOGPL])
Tech
nical
Fault
(MTC
)
mtc
TecF
ault
% <1 100 * MSC_GOSUC:UNS_TECHN_FAULT [MTER] // MSC_LD:CALL_ATTEMPTS [MTER
Tech
nical
Fault
(MOC
)
moc
TecF
ault
% <1
100 * (MSC_GOSUC:UNS_TECHN_FAULT [MOGNPL] ++ MSC_GOSUC:UNS_TECHN_FAULT [MOGPL]) /
/ (MSC_LD:CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:CALL_ATTEMPTS [MOGPL])
Requ
est
Desti
natio
nEr
ror
(MTC
)
mtc
ReqD
estE
rr
% <1 100 * MSC_GOSUC:UNS_REQ_DEST_ERR [MTER]/MSC_LD:CALL_ATTEMPTS [MTER]
Failu
re R
ates
Requ
est
Desti
natio
nEr
ror
(MOC
)
moc
ReqD
estE
rr
% <1
100 * (MSC_GOSUC:UNS_REQ_DEST_ERR [MOGNPL] ++ MSC_GOSUC:UNS_REQ_DEST_ERR [MOGPL]) /
/ (MSC_LD:CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:CALL_ATTEMPTS [MOGPL])
Objec
t
<NE Name>
Tim
e
HH:mm
MSC
Grad
e Of S
ervic
e Rep
ort <
AGGR
EGAT
ION>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
58 E200301-01-714-V10.0I-01
4.1.7.2 VLR Load Analysis Report
Report Name: VLR Load Analysis Report
Report Short Name: VlrLoadReport
Target Groups: Network Optimisation.
Description: This report provides information about average subscriber behaviour in termsof Traffic Volume produced and procedures performed (namely, Handovers,Location Updates, Busy Hour Call Attempts, etc). In summary, it enables thecreation of a precise traffic model based on values obtained from real data.It also informs about the authentication procedure success rate and the num-ber of subscribers currently on the Visitor Location Register.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSCVLR
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 59
Layout:
Authe
ntica
tion
Succ
ess
Rate
auth
SR % 100 - 100 * (VLR_SF:AUTH_WITH_ILEGAL_SUB // VLR_SF:AUTH_REQ)
MSRN
per
Subs
cribe
r
msr
nSub
Nr VLR_EI:PROVIDE_MSRN_RECEIVED // (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
Loca
tion
Upda
tes pe
rSu
bscri
ber
lUpS
ub
Nr VLR_LGOS:REQUESTS_LOCUPD // (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
Inter
MSC
HO pe
rSu
bscri
ber
itcMs
cHo
Sub
Nr
(MSC_HO:HANDOVER_MSC_MSC_OG_ATTEMPTS ++ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:HANDOVER_MSC_MSC_IC_ATTEMPTS ++ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCB) /
/ (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
Intra
MSC
HO pe
rSu
bscri
ber
itrMs
cHo
Sub
Nr
(MSC_HO:HANDOVER_ATTEMPTS -- MSC_HO:HANDOVER_MSC_MSC_OG_ATTEMPTS -
- MSC_HO:SUBSEQ_MSC_MSC_HO_MSCB) // (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
MSC
Contr
olled
HO pe
rSu
bscri
ber
msc
HoSu
b
Nr
(MSC_HO:HANDOVER_ATTEMPTS ++ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:HANDOVER_MSC_MSC_IC_ATTEMPTS) // (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
Traff
ic pe
rSu
bscri
ber
trafS
ub
Erl.s
(MSC_TD:TRAFFIC_VOLUME [MORTR] ++ MSC_TD:TRAFFIC_VOLUME [MICTR]) /
/ (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
BHCA
INpe
rSu
bscri
ber
bhca
InSu
b
Nr
(MSC_LD:IN_ATTEMPTS [MORTR] ++ MSC_LD:IN_ATTEMPTS [MICTR]) /
/ (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
BHCA
per
Subs
cribe
r(W
ithou
tTR
ANS)
bhca
NoTr
ansS
ub
Nr
(MSC_LD:CALL_ATTEMPTS [MORTR] ++ MSC_LD:CALL_ATTEMPTS [MICTR] -- MSC_LD:CALL_ATTEMPTS [MTRAN]) /
/ (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
BHCA
per
Subs
cribe
r
bhca
Sub
Nr
(MSC_LD:CALL_ATTEMPTS [MORTR] ++ MSC_LD:CALL_ATTEMPTS [MICTR]) /
/ (VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN)
Numb
er of
VLR
Subs
cribe
rs
subs Nr VLR_I:ENTRY_USED_OWN + VLR_I:ENTRY_USED_FOREIGN
Objec
t
<NE Name>
Tim
e
HH:mm
VLR
Load
Ana
lysis
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
60 E200301-01-714-V10.0I-01
4.1.7.3 Mobile Originating Calls Analysis Report
Report Name: Mobile Originating Calls Analysis Report
Report Short Name: MocAnalysisReport
Target Groups: Network Optimisation.
Description: This report provides basic information about the Mobile Originating Calls likethe average duration, the Answer Seizure Ratio and the percentage of termi-nations due to No-answer or Busy destination.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSC
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 61
Layout:
Succ
ess R
ate
plm
nSR
% >95
100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MOGPL] +
+ MSC_GOSAC:CALL_REL_A_ALERT [MOGPL] ++ MSC_GOSCE:CALL_TI_OUT_ALERT [MOGPL]+
+ MSC_GOSCE:CALL_REL_BEF_A_ALERT [MOGPL] ++ MSC_GOSUC:UNS_MS_BUSY [MOGPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGPL]
Othe
rs
plm
nOth
ers
%
100 -- 100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGPL] +
+ MSC_GOSAC:BS_REL_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:CALL_REL_A_ALERT [MOGPL] + + MSC_GOSCE:CALL_TI_OUT_ALERT [MOGPL]+
+ MSC_GOSCE:CALL_REL_BEF_A_ALERT [MOGPL] ++ MSC_GOSUC:UNS_MS_BUSY [MOGPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGPL]
Busy
plm
nBus
y
% 100 * MSC_GOSUC:UNS_MS_BUSY [MOGPL] / / MSC_LD:CALL_ATTEMPTS [MOGPL]
A-Re
lease
plm
nARe
l
% 100 * MSC_GOSCE:CALL_REL_BEF_A_ALERT [MOGPL] // MSC_LD:CALL_ATTEMPTS [MOGPL]
No A
nswe
r
plm
nNoA
sw
%
100 * (MSC_GOSAC:CALL_REL_A_ALERT [MOGPL] ++ MSC_GOSCE:CALL_TI_OUT_ALERT [MOGPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGPL]
Answ
er
plm
nAsr
%
100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MOGPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGPL]
Aver
age
Call D
urati
on
plm
nMht
sec MSC_TD:DUR_OF_CONV_SPEECH_SERV [MOGPL] /
/ (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MOGPL])
PLMN
Total
Call A
ttemp
ts
plm
nCA
Nr MSC_LD:CALL_ATTEMPTS [MOGPL]
Objec
t
<NE Name>
Tim
e
HH:mm
Mobi
le Or
igin
atin
g Ca
lls A
nalys
is Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
62 E200301-01-714-V10.0I-01
Layout (cont):
Succ
ess R
ate
pstn
SR % >95
100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:TS11_EMERG_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:TS12_EMERG_WITH_ANSWER [MOGNPL] +
+ MSC_GOSSCE:CALL_REL_A_ALERT [MOGNPL] ++ MSC_GOSSCE:CALL_TIOUT_ALERT [MOGNPL] +
+ MSC_GOSSCE:CALL_REL_BEF_A_ALERT [MOGNPL] ++ MSC_GOSUC:UNS_MS_BUSY [MOGNPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGNPL]Ot
hers
pstn
Othe
rs
%
100 -- 100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:BS_REL_WITH_ANSWER [MOGNPL] ++ MSC_GOSSCE:CALL_REL_A_ALERT [MOGNPL] ++ MSC_GOSSCE:CALL_TIOUT_ALERT [MOGNPL] +
+ MSC_GOSSCE:CALL_REL_BEF_A_ALERT [MOGNPL] ++ MSC_GOSUC:UNS_MS_BUSY [MOGNPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGNPL]
Busy
pstn
Busy
% 100 * MSC_GOSUC:UNS_MS_BUSY [MOGNPL] // MSC_LD:CALL_ATTEMPTS [MOGNPL]
A-Re
lease
pstn
ARel
% 100 * MSC_GOSSCE:CALL_REL_BEF_A_ALERT [MOGNPL] // MSC_LD:CALL_ATTEMPTS [MOGNPL]
No A
nswe
r
pstn
NoAs
w
%
100 * (MSC_GOSSCE:CALL_REL_A_ALERT [MOGNPL] +/ MSC_GOSSCE:CALL_TIOUT_ALERT [MOGNPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGNPL]
Answ
er
pstn
Asr
%
100 * ( MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:TS11_EMERG_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:TS12_EMERG_WITH_ANSWER [MOGNPL]) /
/ MSC_LD:CALL_ATTEMPTS [MOGNPL]
Aver
age
Call D
urati
on
pstn
Mht
sec MSC_TD:DUR_OF_CONV_SPEECH_SERV [MOGNPL] /
/ (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:RNC_REL_WITH_ANSWER [MOGNPL])
PSTN
Total
Call A
ttemp
ts
pstn
CA
Nr MSC_LD:CALL_ATTEMPTS [MOGNPL]
Objec
t
<NE Name>
Tim
e
HH:mm
Mobi
le Or
igin
atin
g Ca
lls A
nalys
is Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 63
4.1.7.3.1 UMTS Mobile Originating Calls Analysis Report
Report Name: UMTSMobile Originating Calls Analysis Report
Report Short Name: UMocAnalysisReport
Target Groups: Network Optimisation.
Description: This report provides basic information about the UMTS Circuit SwitchedMobile Originating Calls on the UMSC. Examples of this information are theaverage duration, the Answer Seizure Ratio and the percentage of termina-tions due to No-answer or Busy destination.The information provided here is similar to the one provided by the "MobileOriginating Calls Analysis" report, the main difference is that the indicators onthis report are referred only to UMTS calls and the other report aims all typesof calls, both GSM and UMTS.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSC
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
64 E200301-01-714-V10.0I-01
Layout:
Succ
ess R
ate
plm
nSR
% >95
100 * (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MOGPL] +
+ MSC_GOSAC:U_CALL_REL_A_ALERT [MOGPL] ++ MSC_GOSCE:U_CALL_TI_OUT_ALERT [MOGPL]+
+ MSC_GOSCE:U_CALL_REL_BEF_A_ALERT [MOGPL] ++ MSC_GOSUC:U_UNS_MS_BUSY [MOGPL]) /
/ MSC_LD:U_CALL_ATTEMPTS [MOGPL]Ot
hers
plm
nOth
ers
%
100 -- 100 * (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MOGPL] +
+ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:U_CALL_REL_A_ALERT [MOGPL] + + MSC_GOSCE:U_CALL_TI_OUT_ALERT [MOGPL]+
+ MSC_GOSCE:U_CALL_REL_BEF_A_ALERT [MOGPL] ++ MSC_GOSUC:U_UNS_MS_BUSY [MOGPL]) /
/ MSC_LD:U_CALL_ATTEMPTS [MOGPL]
Busy
plm
nBus
y
% 100 * MSC_GOSUC:U_UNS_MS_BUSY [MOGPL] / / MSC_LD:U_CALL_ATTEMPTS [MOGPL]
A-Re
lease
plm
nARe
l
% 100 * MSC_GOSCE:U_CALL_REL_BEF_A_ALERT [MOGPL] // MSC_LD:U_CALL_ATTEMPTS [MOGPL]
No A
nswe
r
plm
nNoA
sw
%
100 * (MSC_GOSAC:U_CALL_REL_A_ALERT [MOGPL] ++ MSC_GOSCE:U_CALL_TI_OUT_ALERT [MOGPL]) /
/ MSC_LD:U_CALL_ATTEMPTS [MOGPL]
Answ
er
plm
nAsr
%
100 * (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MOGPL]) /
/ MSC_LD:U_CALL_ATTEMPTS [MOGPL]
Aver
age
Call D
urati
on
plm
nMht
sec MSC_TD:U_DUR_OF_CONV_SPEECH_SERV [MOGPL] /
/ (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MOGPL])
PLMN
Total
Call A
ttemp
ts
plm
nCA
Nr MSC_LD:U_CALL_ATTEMPTS [MOGPL]
Objec
t
<NE Name>
Tim
e
HH:mm
UMTS
Mob
ile O
rigin
atin
g Ca
lls A
nalys
is Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 65
Layout (cont):
Succ
ess R
ate
pstn
SR % >95
100 * (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:U_TS11_EMERG_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:U_TS12_EMERG_WITH_ANSWER [MOGNPL] +
+ MSC_GOSSCE:U_CALL_REL_A_ALERT [MOGNPL] ++ MSC_GOSSCE:U_CALL_TIOUT_ALERT [MOGNPL] +
+ MSC_GOSSCE:U_CALL_REL_BEF_A_ALERT [MOGNPL] ++ MSC_GOSUC:U_UNS_MS_BUSY [MOGNPL]) /
/ MSC_LD:U_CALL_ATTEMPTS [MOGNPL]Ot
hers
pstn
Othe
rs
%100 - 100 *
* (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MOGNPL] +
+ MSC_GOSSCE:U_CALL_REL_A_ALERT [MOGNPL] ++ MSC_GOSSCE:U_CALL_TIOUT_ALERT [MOGNPL] +
+ MSC_GOSSCE:U_CALL_REL_BEF_A_ALERT [MOGNPL] ++ MSC_GOSUC:U_UNS_MS_BUSY [MOGNPL]) /
/ MSC_LD:U_CALL_ATTEMPTS [MOGNPL]
Busy
pstn
Busy
% 100 * MSC_GOSUC:U_UNS_MS_BUSY [MOGNPL] // MSC_LD:U_CALL_ATTEMPTS [MOGNPL]
A-Re
lease
pstn
ARel
% 100 * MSC_GOSSCE:U_CALL_REL_BEF_A_ALERT [MOGNPL] // MSC_LD:U_CALL_ATTEMPTS [MOGNPL]
No A
nswe
r
pstn
NoAs
w
%
100 * (MSC_GOSSCE:U_CALL_REL_A_ALERT [MOGNPL] +/ MSC_GOSSCE:U_CALL_TIOUT_ALERT [MOGNPL]) /
/ MSC_LD:U_CALL_ATTEMPTS [MOGNPL]
Answ
er
pstn
Asr
%
100 * ( MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:U_TS11_EMERG_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:U_TS12_EMERG_WITH_ANSWER [MOGNPL]) /
/ MSC_LD:U_CALL_ATTEMPTS [MOGNPL]
Aver
age
Call D
urati
on
pstn
Mht
sec MSC_TD:U_DUR_OF_CONV_SPEECH_SERV [MOGNPL] /
/ (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MOGNPL])
PSTN
Total
Call A
ttemp
ts
pstn
CA
Nr MSC_LD:U_CALL_ATTEMPTS [MOGNPL]
Objec
t
<NE Name>
Tim
e
HH:mm
UMTS
Mob
ile O
rigin
atin
g Ca
lls A
nalys
is Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
66 E200301-01-714-V10.0I-01
4.1.7.4 Mobile Terminating Calls Analysis Report
Report Name: Mobile Terminating Calls Analysis Report
Report Short Name: MtcAnalysisReport
Target Groups: Network Optimisation.
Description: This report provides basic information about the Mobile Terminating Calls likethe average duration, the Answer Seizure Ratio and the percentage of termi-nations due to No-answer or Busy destination.Additionally, it shows other statistics related with the completion of the pagingprocedure.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSC
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 67
Layout:
MS-B
locke
d
msB
loc
% 100 * MSC_GOSUC:UNS_MS_BLOCKED [MTER] // MSC_LD:CALL_ATTEMPTS [MTER]
A-Re
lease
aRel % 100 * MSC_GOSSCE:CALL_REL_BEF_ALERT [MTER] /
/ MSC_LD:CALL_ATTEMPTS [MTER]
Busy
busy % 100 * MSC_GOSUC:UNS_MS_BUSY [MTER] /
/ MSC_LD:CALL_ATTEMPTS [MTER]
No A
nswe
r
noAs
w
% 100 * MSC_GOSSCE:CALL_REL_ALERT [MTER] // MSC_LD:CALL_ATTEMPTS [MTER]
Answ
er
asr %
100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MTER] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MTER]) /
/ MSC_LD:CALL_ATTEMPTS [MTER]
Aver
age
Call D
urati
on
mht sec MSC_TD:DUR_OF_CONV_SPEECH_SERV [MTER] /
/ (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MTER] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MTER])
Calls
With
TCH
Alloc
ation
tchA
lloc
% 100 * MSC_GOSSCE:CALL_TCH_ALLOCATION [MTER] // MSC_LD:CALL_ATTEMPTS [MTER]
MTC
Succ
ess R
ate
mtc
SR % >95
100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MTER] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MTER] +
+ MSC_GOSSCE:CALL_REL_ALERT [MTER] ++ MSC_GOSSCE:CALL_REL_BEF_ALERT [MTER] +
+ MSC_GOSUC:UNS_MS_BUSY [MTER] ++ MSC_GOSUC:UNS_MS_BLOCKED [MTER] +
+ MSC_GOSSCE:CALL_END_CALL_FORW [MTER]) // MSC_LD:CALL_ATTEMPTS [MTER]
Calls
Total
Call A
ttemp
ts
mtc
CA Nr MSC_LD:CALL_ATTEMPTS [MTER]
Objec
t
<NE Name>
Tim
e
HH:mm
Mobi
le Te
rmin
atin
g Ca
ll Ana
lysis
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
68E200301-01-714-V10.0I-01
Layout (cont):
Mobile Terminating Call Analysis Report <AGGREGATION>
Start Date: <START_DATE>End Date: <END_DATE>
CallsPaging
CallForwarding
OthersStarted Paging
ProceduresPaging
ResponsePaging
Time OutMTC
Setup Rate
forwothers
startPagpagRes
pagTiOutm
tcSepRate
%%
Nr%
%%
DateTim
eObject
>90
YYYY-MM-DD
HH:mm
<NE Name>
100 * MSC_GOSSCE:CALL_END_CALL_FORW [MTER] // MSC_LD:CALL_ATTEMPTS [MTER]
100 - 100 * (MSC_GOSAC:SPEECH_CALLS_WITH_ANSWER [MTER] ++ MSC_GOSAC:BS_REL_WITH_ANSWER [MTER] +
+ MSC_GOSSCE:CALL_REL_ALERT [MTER] ++ MSC_GOSSCE:CALL_REL_BEF_ALERT [MTER] +
+ MSC_GOSUC:UNS_MS_BUSY [MTER] ++ MSC_GOSUC:UNS_MS_BLOCKED [MTER] +
+ MSC_GOSSCE:CALL_END_CALL_FORW [MTER]) // MSC_LD:CALL_ATTEMPTS [MTER]
MSC_LD:STARTED_PAGING_PROC [MTER]
100 * MSC_GOSSCE:RECEIVED_PAG_RESP [MTER] // MSC_LD:STARTED_PAGING_PROC [MTER]
100 * MSC_GOSUC:UNS_PAGING [MTER] // MSC_LD:STARTED_PAGING_PROC [MTER]
100 * MSC_LD:GEN_TRAFF_CHAN_REQ [MTER] // MSC_GOSSCE:RECEIVED_PAG_RESP [MTER]
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 69
4.1.7.4.1 UMTS Mobile Terminating Calls Analysis Report
Report Name: UMTS Mobile Terminating Calls Analysis Report
Report Short Name: UMtcAnalysisReport
Target Groups: Network Optimisation.
Description: This report provides basic information about the UMTS Circuit SwitchedMobile Terminating Calls. Examples of this information are the average dura-tion, the Answer Seizure Ratio and the percentage of terminations due to No-answer or Busy destination.The information provided here is similar to the one provided by the "MobileTerminating Calls Analysis Report", the main difference is that the indica-tors on this report are referred only to UMTS calls and the other report aimsall types of calls, both GSM and UMTS.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSC
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
70 E200301-01-714-V10.0I-01
Layout:
MTC
Setup
Rate
mtc
SepR
ate
% >90 100 * MSC_LD:U_GEN_TRAFF_CHAN_REQ [MTER] /
/ MSC_GOSSCE:U_RECEIVED_PAG_RESP [MTER]Pa
ging
Rece
ived
Pagin
gRe
spon
ses
pagR
es
Nr MSC_GOSSCE:U_RECEIVED_PAG_RESP [MTER]Ot
hers
othe
rs
%
100 - 100 * (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MTER] ++ MSC_GOSAC:U_RNC_REL_WITH_ANSWER [MTER] +
+ MSC_GOSSCE:U_CALL_REL_ALERT [MTER] ++ MSC_GOSSCE:U_CALL_REL_BEF_ALERT [MTER] +
+ MSC_GOSUC:U_UNS_MS_BUSY [MTER] ++ MSC_GOSSCE:U_CALL_END_CALL_FORW [MTER]) /
/ MSC_LD:U_CALL_ATTEMPTS [MTER]
Call
Forw
ardin
g
forw % 100 * MSC_GOSSCE:U_CALL_END_CALL_FORW [MTER] /
/ MSC_LD:U_CALL_ATTEMPTS [MTER]
A-Re
lease
aRel % 100 * MSC_GOSSCE:U_CALL_REL_BEF_ALERT [MTER] /
/ MSC_LD:U_CALL_ATTEMPTS [MTER]
Busy
busy % 100 * MSC_GOSUC:U_UNS_MS_BUSY [MTER] /
/ MSC_LD:U_CALL_ATTEMPTS [MTER]
NoAn
swer
noAs
w
% 100 * MSC_GOSSCE:U_CALL_REL_ALERT [MTER] // MSC_LD:U_CALL_ATTEMPTS [MTER]
Answ
er
asr %
100 * (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MTER] ++ MSC_GOSAC:U_BS_REL_WITH_ANSWER [MTER]) /
/ MSC_LD:U_CALL_ATTEMPTS [MTER]
Aver
age
Call
Dura
tion
mht sec MSC_TD:U_DUR_OF_CONV_SPEECH_SERV [MTER] /
/ (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MTER] ++ MSC_GOSAC:U_BS_REL_WITH_ANSWER [MTER])
Calls
With
TCH
Alloc
ation
tchA
lloc
% 100 * MSC_GOSSCE:U_CALL_TCH_ALLOCATION [MTER] // MSC_LD:U_CALL_ATTEMPTS [MTER]
MTC
Succ
ess R
ate
mtc
SR % >95
100 * (MSC_GOSAC:U_SPEECH_CALLS_WITH_ANSWER [MTER] +MSC_GOSAC:U_BS_REL_WITH_ANSWER [MTER] +
+ MSC_GOSSCE:U_CALL_REL_ALERT [MTER] +MSC_GOSSCE:U_CALL_REL_BEF_ALERT [MTER] +
+ MSC_GOSUC:U_UNS_MS_BUSY [MTER] +MSC_GOSUC:U_UNS_MS_BLOCKED [MTER] +
+ MSC_GOSSCE:U_CALL_END_CALL_FORW [MTER]) /MSC_LD:U_CALL_ATTEMPTS [MTER]
Calls
Total
Call
Attem
pts
mtc
CA Nr MSC_LD:U_CALL_ATTEMPTS [MTER]
Objec
t
<NE Name>
Tim
e
HH:mm
UMTS
Mob
ile T
erm
inat
ing
Calls
Ana
lysis
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 71
4.1.7.5 Handover Analysis Report
Report Name: Handover Analysis Report
Report Short Name: HoAnalysisReport
Target Groups: Network Optimisation.
Description: This report details the causes of handovers and the success rates for severaldifferent types of handover (the type of handover depends on the networknodes involved in the procedure).
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSC
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
72 E200301-01-714-V10.0I-01
Layout:
Bette
rCe
ll
betC
ellHo
Rate
% 100 * MSC_HO:HANDOVER_BETTER_CELL // MSC_HO:HANDOVER_ATTEMPTS
Quali
ty
quHo
Rate
%
100 * (MSC_HO:HANDOVER_UPLINK_QUALITY ++ MSC_HO:HANDOVER_DOWNLINK_QUALITY) /
/ MSC_HO:HANDOVER_ATTEMPTSCaus
es
Stre
ngth
str
HoRa
te
%
100 * (MSC_HO:HANDOVER_UPLINK_STRENGTH ++ MSC_HO:HANDOVER_DOWNLINK_STRENGTH) /
/ MSC_HO:HANDOVER_ATTEMPTS
HO F
ail
hoFa
il
%
100 - 100 * (MSC_HO:SUCC_COMPLETED_HO ++ MSC_HO:SUCC_MSC_MSC_HO_MSCA +
+ MSC_HO:SUCC_HO_SEC_MSC_MSC_HO_MSCB) // MSC_HO:HO_CONFERENCE
HO N
otAl
lowed
hoNo
tAllo
w
%
100 - 100 * MSC_HO:HO_CONFERENCE // (MSC_HO:HANDOVER_ATTEMPTS +
+ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCA -- MSC_HO:SUBSEQ_MSC_MSC_HO_MSCB)
Inter
MSC
BSu
cces
sRa
te
iteMs
cBSR %
100 * (MSC_HO:SUCC_MSC_MSC_HO_MSCB ++ MSC_HO:SUCC_SUBSEQ_MSC_MSC_HO_MSCB) // (MSC_HO:HANDOVER_MSC_MSC_IC_ATTEMPTS +
+ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCB)
Inter
MSC
ASu
cces
sRa
te
iteMs
cASR %
100 * MSC_HO:SUCC_MSC_MSC_HO_MSCA // (MSC_HO:HANDOVER_MSC_MSC_OG_ATTEMPTS +
+ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCA)
Intra
MSC
Succ
ess
Rate
itrMs
cSR
%
100 * (MSC_HO:SUCC_COMPLETED_HO ++ MSC_HO:SUCC_HO_SEC_MSC_MSC_HO_MSCB) /
/ (MSC_HO:HANDOVER_ATTEMPTS -- MSC_HO:HANDOVER_MSC_MSC_OG_ATTEMPTS -
- MSC_HO:SUBSEQ_MSC_MSC_HO_MSCB)
HOFa
ilure
Rate
hoFR %
100 - 100 * (MSC_HO:SUCC_COMPLETED_HO ++ MSC_HO:SUCC_MSC_MSC_HO_MSCA ++ MSC_HO:SUCC_MSC_MSC_HO_MSCB +
+ MSC_HO:SUCC_SUBSEQ_MSC_MSC_HO_MSCB ++ MSC_HO:SUCC_HO_SEC_MSC_MSC_HO_MSCB) /
/ (MSC_HO:HANDOVER_ATTEMPTS ++ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:HANDOVER_MSC_MSC_IC_ATTEMPTS)
HOSu
cces
s Rate
hoSR % >85
100 * (MSC_HO:SUCC_COMPLETED_HO ++ MSC_HO:SUCC_MSC_MSC_HO_MSCA ++ MSC_HO:SUCC_MSC_MSC_HO_MSCB +
+ MSC_HO:SUCC_SUBSEQ_MSC_MSC_HO_MSCB++ MSC_HO:SUCC_HO_SEC_MSC_MSC_HO_MSCB) /
/ (MSC_HO:HANDOVER_ATTEMPTS ++ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:HANDOVER_MSC_MSC_IC_ATTEMPTS)
Gene
ral
Total
HO
Attem
pts
attH
o
Nr
MSC_HO:HANDOVER_ATTEMPTS ++ MSC_HO:SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:HANDOVER_MSC_MSC_IC_ATTEMPTS
Objec
t
<NE Name>
Tim
e
HH:mm
Hand
over
Ana
lysis
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 73
4.1.7.5.1 UMTS Handover Anal ysis Report
Report Name: UMTS Handover Analysis Report
Report Short Name: UHoAnalysisReport
Target Groups: Network Optimisation.
Description: This report details the causes of handovers and the success rates for severaldifferent types of UMTS handover (the type of handover depends on thenetwork elements involved in the procedure).The information provided here is similar to the one provided by "HandoverAnalysis Report"; the main difference is that the indicators on this report arereferred only to Handovers performed on UMTS calls and the other reportaims handovers performed on all types of calls, both GSM and UMTS.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSC
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
74 E200301-01-714-V10.0I-01
Layout:
Succ
essfu
l Inter
MSC
HO fr
omUM
TS to
GSM
iteUm
tsGs
mHo
Suc
Nr MSC_HO:U_INTER_HANDOVER_UMTS_TO_GSM
Succ
essfu
l Intra
MSC
HO fr
omUM
TS to
GSM
itrUm
tsGs
mHo
Suc
Nr MSC_HO:U_INTRA_HANDOVER_UMTS_TO_GSMInt
er M
SC B
Succ
ess R
ate
iteMs
cBSR
%100 * (MSC_HO:U_SUCC_MSC_MSC_HO_MSCB +MSC_HO:SUCC_SUBSEQ_MSC_MSC_HO_MSCB) /
/ (MSC_HO:U_HANDOVER_MSC_MSC_IC_ATTEMPTS ++ MSC_HO:U_SUBSEQ_MSC_MSC_HO_MSCB)
Inter
MSC
ASu
cces
s Rate
iteMs
cASR
%
100 * MSC_HO:U_SUCC_MSC_MSC_HO_MSCA // (MSC_HO:U_HANDOVER_MSC_MSC_OG_ATTEMPTS +
+ MSC_HO:U_SUBSEQ_MSC_MSC_HO_MSCA)
Intra
MSC
Succ
ess R
ate
itrMs
cSR
%
100 * (MSC_HO:U_SUCC_COMPLETED_HO ++ MSC_HO:U_SUCC_HO_SEC_MSC_MSC_HO_MSCB) /
/ (MSC_HO:U_HANDOVER_ATTEMPTS -- MSC_HO:U_HANDOVER_MSC_MSC_OG_ATTEMPTS -
- MSC_HO:U_SUBSEQ_MSC_MSC_HO_MSCB)
HOFa
ilure
Rate
hoFR %
100 - 100 * (MSC_HO:U_SUCC_COMPLETED_HO ++ MSC_HO:U_SUCC_MSC_MSC_HO_MSCA ++ MSC_HO:U_SUCC_MSC_MSC_HO_MSCB +
+ MSC_HO:U_SUCC_SUBSEQ_MSC_MSC_HO_MSCB ++ MSC_HO:U_SUCC_HO_SEC_MSC_MSC_HO_MSCB) /
/ (MSC_HO:U_HANDOVER_ATTEMPTS ++ MSC_HO:U_SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:U_HANDOVER_MSC_MSC_IC_ATTEMPTS)
HOSu
cces
s Rate
hoSR % >85
100 * (MSC_HO:U_SUCC_COMPLETED_HO ++ MSC_HO:U_SUCC_MSC_MSC_HO_MSCA ++ MSC_HO:U_SUCC_MSC_MSC_HO_MSCB +
+ MSC_HO:U_SUCC_SUBSEQ_MSC_MSC_HO_MSCB++ MSC_HO:U_SUCC_HO_SEC_MSC_MSC_HO_MSCB) /
/ (MSC_HO:U_HANDOVER_ATTEMPTS ++ MSC_HO:U_SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:U_HANDOVER_MSC_MSC_IC_ATTEMPTS)
Total
HO
Attem
pts
attH
o
Nr
MSC_HO:U_HANDOVER_ATTEMPTS ++ MSC_HO:U_SUBSEQ_MSC_MSC_HO_MSCA +
+ MSC_HO:U_HANDOVER_MSC_MSC_IC_ATTEMPTS
Objec
t
<NE Name>
Tim
e
HH:mm
UMTS
Han
dove
r Ana
lysis
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 75
4.1.7.6 Location Update Ana lysis Report
Report Name: Location Update Analysis Report
Report Short Name: LupAnalysisReport
Target Groups: Network Optimisation.
Description: This report provides the success rate of the Location Update procedure, itdetails this value for inter and intra VLR, and provides the proportions of bothtypes of LUP related to the total of LUP procedures performed.It also provides the frequency of IMSI attaches performed together with theLocation Updates.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: VLR
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
76 E200301-01-714-V10.0I-01
Layout:
Aver
age
Comb
ined
LUP
Time
avgC
omb
LupT
i
sec MSC_LDGS:TIME_COM_LUP_SERV /
/ MSC_LDGS:NUM_COM_LUP_CONTRIB
Comb
ined
LUP
Succ
ess
Rate
com
bLu
pSR
% 100 * VLR:VLR_CPCLU:SUCC_COM_LUP // VLR_CPCLU:COM_LUP_REQ
Comb
ined L
UP (o
nly S
R9.0
on)
Requ
ests
forCo
mbine
dLU
P
req
Com
bLup
Nr VLR_CPCLU:COM_LUP_REQ
Aver
age
LUP
Time
avg
LupT
i
sec <6 MSC_TD:TIME_LUP_SERV / MSC_TD:NUM_LUP_CONTRIB
Perio
dicLU
PRa
te
per
LupR
ate
% 100 * VLR_LGOS:REQUESTS_PERIODIC_LOCUPD // VLR_LGOS:REQUESTS_LOCUPD
IMSI
Attac
hRa
te
imsiA
tch
Rate % 100 * VLR_LGOS:REQUESTS_LOCUPDIMAT /
/ VLR_LGOS:REQUESTS_LOCUPD
Inter
VLR
Rate
iteVl
rRa
te % 100 * VLR_LGOS:REQUESTS_LOCUPD_INR // VLR_LGOS:REQUESTS_LOCUPD
Intra
VLR
Rate
itrVl
rRa
te % 100 * VLR_LGOS:REQUESTS_LOCUPD_INT // VLR_LGOS:REQUESTS_LOCUPD
Inter
VLR
Succ
ess
iteVl
rSuc
%
100 * (VLR_LGOS:VLR_CHANGES_PVLR_KNOWN ++ VLR_LGOS:VLR_CHANGES_PVLR_UNKNOWN) /
/ VLR_LGOS:REQUESTS_LOCUPD_INR
Intra
VLR
Succ
ess
itrVl
rSuc
%
100 * (VLR_LGOS:SUCC_REQUESTS_LOCUPD ++ VLR_LGOS:SUCC_LOCUPD_WITH_IMSI_ATTACH -
- VLR_LGOS:LOCUPD_LAI_NULL -- VLR_LGOS:VLR_CHANGES_PVLR_KNOWN -
- VLR_LGOS:VLR_CHANGES_PVLR_UNKNOWN) // VLR_LGOS:REQUESTS_LOCUPD_INT
LUP
IMSI
Succ
ess
lup
ImsiS
uc
% 100 * VLR_LGOS:SUCC_LOCUPD_WITH_IMSI_ATTACH // VLR_LGOS:REQUESTS_LOCUPDIMAT
LUP
Succ
ess
lupS
uc
% >95 100 * (VLR_LGOS:SUCC_REQUESTS_LOCUPD +
+ VLR_LGOS:SUCC_LOCUPD_WITH_IMSI_ATTACH) // VLR_LGOS:REQUESTS_LOCUPD
Gene
ral
Requ
ests
for LU
P
lupR
eq
Nr VLR_LGOS:REQUESTS_LOCUPD
Objec
t
<NE Name>
Tim
e
HH:mm
Loca
tion
Upda
te A
nalys
is Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 77
4.1.7.7 Short Message Service Analysis Report
Report Name: Short Message Service Analysis Report
Report Short Name: SmsAnalysisReport
Target Groups: Network Optimisation.
Description: This report informs the operator about failure reasons and success rate rela-ted to the Short Message Service.It also details the information for incoming and outgoing Short Messages.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSC
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
78 E200301-01-714-V10.0I-01
Layout:
Unide
ntifie
dSu
bscri
ber
out
Unid
Sub
% 100 * MSC_SMS:UNS_SMS_OTG_UNIDENT_MS // MSC_SMS:SMS_OTG_ATTEMPTS
Outgo
ingDe
liver
yFa
il
outD
elFa
il % 100 * MSC_SMS:UNS_SMS_OTG_DELIVERY_FAIL // MSC_SMS:SMS_OTG_ATTEMPTS
Outgo
ingSu
cces
s
outS
uc
% 100 * MSC_SMS:SUCC_SMS_OTG // MSC_SMS:SMS_OTG_ATTEMPTS
Outgo
ing
SMS
attem
pts
outA
tt
Nr MSC_SMS:SMS_OTG_ATTEMPTS
Abse
ntSu
bscri
ber
inc
AbsS
ub
% 100 * MSC_SMS:UNS_SMS_INC_ABSENT_MS // MSC_SMS:SMS_INC_ATTEMPTS
Incom
ingDe
liver
yFa
il
incD
elFa
il % 100 * MSC_SMS:UNS_SMS_INC_DELIVERY_FAIL // MSC_SMS:SMS_INC_ATTEMPTS
Incom
ingSu
cces
s
incS
uc
% 100 * MSC_SMS:SUCC_SMS_INC // MSC_SMS:SMS_INC_ATTEMPTS
Incom
ing
SMS
Attem
pts
incA
tt
Nr MSC_SMS:SMS_INC_ATTEMPTS
Othe
rRe
ason
s
othe
rRe
as %
100 - 100 * (MSC_SMS:SUCC_SMS_INC ++ MSC_SMS:SUCC_SMS_OTG +
+ MSC_SMS:UNS_SMS_INC_DELIVERY_FAIL ++ MSC_SMS:UNS_SMS_OTG_DELIVERY_FAIL) /
/ (MSC_SMS:SMS_INC_ATTEMPTS ++ MSC_SMS:SMS_OTG_ATTEMPTS)
SMS
Deliv
ery
Fail
smsD
elFa
il %
100 * (MSC_SMS:UNS_SMS_INC_DELIVERY_FAIL ++ MSC_SMS:UNS_SMS_OTG_DELIVERY_FAIL) /
/ (MSC_SMS:SMS_INC_ATTEMPTS ++ MSC_SMS:SMS_OTG_ATTEMPTS)
SMS
Failu
re
smsF
ail
%
100 - 100 * (MSC_SMS:SUCC_SMS_INC ++ MSC_SMS:SUCC_SMS_OTG) /
/ (MSC_SMS:SMS_INC_ATTEMPTS ++ MSC_SMS:SMS_OTG_ATTEMPTS)
Total
SMS
Succ
ess
smsS
uc
%
100 * (MSC_SMS:SUCC_SMS_INC ++ MSC_SMS:SUCC_SMS_OTG) /
/ (MSC_SMS:SMS_INC_ATTEMPTS ++ MSC_SMS:SMS_OTG_ATTEMPTS)
Objec
t
<NE Name>
Tim
e
HH:mm
Shor
t Mes
sage
Ser
vice A
nalys
is Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 79
4.1.7.8 Data And Fax Analysis Report
Report Name: Data And Fax Analysis Report
Report Short Name: DataFaxAnalysisReport
Target Groups: Network Optimisation.
Description: This report informs the operator about the success rates related to all types ofFax and Data services available. It details the information for each dataservice, namely: Circuit Duplex Synchronous and Asynchronous, AlternateSpeech/Data or Speech Followed by Data Services, and also for eachFacsimile service. It also details the information for each type of traffic (e.g.MTC, MOC PLMN or MOC PSTN).
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSC
Remarks: None.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
80E200301-01-714-V10.0I-01
Layout:
Data And Fax Analysis Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>General
Fax CallAttempts
Fax RatioFax Answer
RateData CallAttempts
Data Ratio
faxAttfaxRate
faxASRdataAtt
dataRate
Nr%
%Nr
%
DateTim
eObject
YYYY-MM-DD
HH:mm
<NE Name>
MSC_LD:FAX3_CALL_ATTEMPTS [MOGPL] + MSC_LD:FAX3_CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:FAX3_CALL_ATTEMPTS [MTER] + MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGNPL] +
+ MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGPL] + MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MTER]
100 * (MSC_LD:FAX3_CALL_ATTEMPTS [MOGPL] + MSC_LD:FAX3_CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:FAX3_CALL_ATTEMPTS [MTER] + MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGNPL] +
+ MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGPL] + MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MTER]) // (MSC_LD:CALL_ATTEMPTS [MOGPL] + MSC_LD:CALL_ATTEMPTS [MOGNPL] +
+ MSC_LD:CALL_ATTEMPTS [MTER])
100 * (MSC_GOSAC:FAX3_WITH_ANSWER [MOGPL] + MSC_GOSAC:FAX3_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:FAX3_WITH_ANSWER [MTER] + MSC_GOSAC:ALTFAXSP_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:ALTFAXSP_WITH_ANSWER [MOGPL] + MSC_GOSAC:ALTFAXSP_WITH_ANSWER [MTER]) // (MSC_LD:FAX3_CALL_ATTEMPTS [MOGPL] + MSC_LD:FAX3_CALL_ATTEMPTS [MOGNPL] +
+ MSC_LD:FAX3_CALL_ATTEMPTS [MTER] + MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGPL] + MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MTER])
MSC_LD:DATACDA_ANA_ATTEMPTS [MOGPL] + MSC_LD:DATACDA_ANA_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDA_ANA_ATTEMPTS [MTER] + MSC_LD:DATACDA_DIG_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDA_DIG_ATTEMPTS [MOGPL] + MSC_LD:DATACDA_DIG_ATTEMPTS [MTER] +
+ MSC_LD:DATACDS_ANA_ATTEMPTS [MOGPL] + MSC_LD:DATACDS_ANA_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDS_ANA_ATTEMPTS [MTER] + MSC_LD:DATACDS_DIG_ATTEMPTS [MOGNPL] +
+ MSC_LD:DATACDS_DIG_ATTEMPTS [MOGPL] + MSC_LD:DATACDS_DIG_ATTEMPTS [MTER]
100 * (MSC_LD:DATACDA_ANA_ATTEMPTS [MOGPL] + MSC_LD:DATACDA_ANA_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDA_ANA_ATTEMPTS [MTER] + MSC_LD:DATACDA_DIG_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDA_DIG_ATTEMPTS [MOGPL] + MSC_LD:DATACDA_DIG_ATTEMPTS [MTER] +
+ MSC_LD:DATACDS_ANA_ATTEMPTS [MOGPL] + MSC_LD:DATACDS_ANA_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDS_ANA_ATTEMPTS [MTER] + MSC_LD:DATACDS_DIG_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDS_DIG_ATTEMPTS [MOGPL] + MSC_LD:DATACDS_DIG_ATTEMPTS [MTER]) /
/ ( MSC_LD:CALL_ATTEMPTS [MOGPL] + MSC_LD:CALL_ATTEMPTS [MOGNPL] ++ MSC_LD:CALL_ATTEMPTS [MTER])
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 81
Layout (cont):
plm
nFa
x3 SR % 100 * MSC_GOSAC:FAX3_WITH_ANSWER [MOGPL] // MSC_LD:FAX3_CALL_ATTEMPTS [MOGPL]
Fax G
roup
3
plm
nFa
x3 Nr MSC_LD:FAX3_CALL_ATTEMPTS [MOGPL]
plm
nCd
sDi
g SR % 100 * MSC_GOSAC:ALTFAXSP_WITH_ANSWER [MOGPL] // MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGPL]
Alter
nate
Fax
Spee
ch
plm
nCd
sDi
g Nr MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGPL]pl
mn
Cds
Anlg SR % 100 * MSC_GOSAC:DATACDS_DIG_WITH_ANSWER [MOGPL] /
/ MSC_LD:DATACDS_DIG_ATTEMPTS [MOGPL]
CDS
Digit
al
plm
nCd
sAn
lg Nr MSC_LD:DATACDS_DIG_ATTEMPTS [MOGPL]
plm
nCd
aDi
gSR % 100 * MSC_GOSAC:DATACDS_ANA_WITH_ANSWER [MOGPL] /
/ MSC_LD:DATACDS_ANA_ATTEMPTS [MOGPL]
CDS
Analo
gue
plm
nCd
aDi
g Nr MSC_LD:DATACDS_ANA_ATTEMPTS [MOGPL]
plm
nCd
aDi
gSR % 100 * MSC_GOSAC:DATACDA_DIG_WITH_ANSWER [MOGPL] /
/ MSC_LD:DATACDA_DIG_ATTEMPTS [MOGPL]
CDA
Digit
al
plm
nCd
aDi
g Nr MSC_LD:DATACDA_DIG_ATTEMPTS [MOGPL]
plm
nCd
aAn
lgSR % 100 * MSC_GOSAC:DATACDA_ANA_WITH_ANSWER [MOGPL] /
/ MSC_LD:DATACDA_ANA_ATTEMPTS [MOGPL]
Succ
ess R
ates (
MOC
PLMN
)
CDA
Analo
gue
plm
nCd
aAn
lg Nr MSC_LD:DATACDA_ANA_ATTEMPTS [MOGPL]
Gene
ral
Data
Answ
er R
ate
data
ASR
%
100 * (MSC_GOSAC:DATACDA_ANA_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:DATACDA_ANA_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:DATACDA_ANA_WITH_ANSWER [MTER] ++ MSC_GOSAC:DATACDA_DIG_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:DATACDA_DIG_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:DATACDA_DIG_WITH_ANSWER [MTER] +
+ MSC_GOSAC:DATACDS_ANA_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:DATACDS_ANA_WITH_ANSWER [MOGNPL] +
+ MSC_GOSAC:DATACDS_ANA_WITH_ANSWER [MTER] ++ MSC_GOSAC:DATACDS_DIG_WITH_ANSWER [MOGNPL] ++ MSC_GOSAC:DATACDS_DIG_WITH_ANSWER [MOGPL] ++ MSC_GOSAC:DATACDS_DIG_WITH_ANSWER [MTER]) /
/ (MSC_LD:DATACDA_ANA_ATTEMPTS [MOGPL] ++ MSC_LD:DATACDA_ANA_ATTEMPTS [MOGNPL] +
+ MSC_LD:DATACDA_ANA_ATTEMPTS [MTER] ++ MSC_LD:DATACDA_DIG_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDA_DIG_ATTEMPTS [MOGPL] ++ MSC_LD:DATACDA_DIG_ATTEMPTS [MTER] +
+ MSC_LD:DATACDS_ANA_ATTEMPTS [MOGPL] ++ MSC_LD:DATACDS_ANA_ATTEMPTS [MOGNPL] +
+ MSC_LD:DATACDS_ANA_ATTEMPTS [MTER] ++ MSC_LD:DATACDS_DIG_ATTEMPTS [MOGNPL] ++ MSC_LD:DATACDS_DIG_ATTEMPTS [MOGPL] +
+ MSC_LD:DATACDS_DIG_ATTEMPTS [MTER])
Objec
t
<NE Name>
Tim
e
HH:mm
Data
And
Fax
Ana
lysis
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
82 E200301-01-714-V10.0I-01
Layout (cont):
pstn
Spch
Data
SR % 100 * MSC_GOSAC:ALT_SPEECH_DATA_ANSWER [MOGNPL] // MSC_LD:ALT_SPEECH_DATA_ATTEMPTS [MOGNPL]
Alter
nate
Spee
ch D
ata
pstn
Spch
Data Nr MSC_LD:ALT_SPEECH_DATA_ATTEMPTS [MOGNPL
pstn
Fax3
SR
% 100 * MSC_GOSAC:FAX3_WITH_ANSWER [MOGNPL] // MSC_LD:FAX3_CALL_ATTEMPTS [MOGNPL]
Fax G
roup
3
pstn
Fax3 Nr MSC_LD:FAX3_CALL_ATTEMPTS [MOGNPL]
pstn
Fax
Spch
SR
% 100 * MSC_GOSAC:ALTFAXSP_WITH_ANSWER [MOGNPL] // MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGNPL]
Alter
nate
Fax S
peec
h
pstn
Fax
Spch Nr MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MOGNPL]
pstn
Cds
DigS
R
% 100 * MSC_GOSAC:DATACDS_DIG_WITH_ANSWER [MOGNPL] // MSC_LD:DATACDS_DIG_ATTEMPTS [MOGNPL]
CDS
Digit
al
pstn
Cds
Dig Nr MSC_LD:DATACDS_DIG_ATTEMPTS [MOGNPL]
pstn
Cds
Anlg
SR % 100 * MSC_GOSAC:DATACDS_ANA_WITH_ANSWER [MOGNPL] / / MSC_LD:DATACDS_ANA_ATTEMPTS [MOGNPL]
CDS
Analo
gue
pstn
Cds
Anlg Nr MSC_LD:DATACDS_ANA_ATTEMPTS [MOGNPL]
pstn
Cda
DigS
R
% 100 * MSC_GOSAC:DATACDA_DIG_WITH_ANSWER [MOGNPL] / / MSC_LD:DATACDA_DIG_ATTEMPTS [MOGNPL]
CDA
Digit
al
pstn
Cda
Dig Nr MSC_LD:DATACDA_DIG_ATTEMPTS [MOGNPL]
pstn
Cda
Anlg
SR
% 100 * MSC_GOSAC:DATACDA_ANA_WITH_ANSWER [MOGNPL] // MSC_LD:DATACDA_ANA_ATTEMPTS [MOGNPL]
Succ
ess R
ates (
MOC
PSTN
)
CDA
Analo
gue
pstn
Cda
Anlg Nr MSC_LD:DATACDA_ANA_ATTEMPTS [MOGNPL]
plm
nSp
chDa
taSR % 100 * MSC_GOSAC:ALT_SPEECH_DATA_ANSWER [MOGPL] /
/ MSC_LD:ALT_SPEECH_DATA_ATTEMPTS [MOGPL]
Succ
ess R
ates
(MOC
PLM
N)
Alter
nate
Spee
ch D
ata
plm
nSp
chDa
ta Nr MSC_LD:ALT_SPEECH_DATA_ATTEMPTS [MOGPL]
Objec
t
<NE Name>
Tim
e
HH:mm
Data
And
Fax
Ana
lysis
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 83
Layout (cont):
mtc
Spch
Data
SR % 100 * MSC_GOSAC:ALT_SPEECH_DATA_ANSWER [MTER] // MSC_LD:ALT_SPEECH_DATA_ATTEMPTS [MTER]
Alter
nate
Spee
ch D
ata
mtc
Spch
Data Nr MSC_LD:ALT_SPEECH_DATA_ATTEMPTS [MTER]
mtc
Fax3
SR
% 100 * MSC_GOSAC:FAX3_WITH_ANSWER [MTER] // MSC_LD:FAX3_CALL_ATTEMPTS [MTER]
Fax G
roup
3
mtc
Fax3 Nr MSC_LD:FAX3_CALL_ATTEMPTS [MTER]
mtc Fax
Spch
SR
% 100 * MSC_GOSAC:ALTFAXSP_WITH_ANSWER [MTER] // MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MTER]
Alter
nate
Fax S
peec
h
mtc Fax
Spch Nr MSC_LD:ALTFAXSP_CALL_ATTEMPTS [MTER]
mtc
Cds
DigS
R
% 100 * MSC_GOSAC:DATACDS_DIG_WITH_ANSWER [MTER] // MSC_LD:DATACDS_DIG_ATTEMPTS [MTER]
CDS
Digit
al
mtc
Cds
Dig Nr MSC_LD:DATACDS_DIG_ATTEMPTS [MTER]
mtc
Cds
Anlg
SR % 100 * MSC_GOSAC:DATACDS_ANA_WITH_ANSWER [MTER] // MSC_LD:DATACDS_ANA_ATTEMPTS [MTER]
CDS
Analo
gue
mtc
Cds
Anlg Nr MSC_LD:DATACDS_ANA_ATTEMPTS [MTER]
mtc
Cda
DigS
R
% 100 * MSC_GOSAC:DATACDA_DIG_WITH_ANSWER [MTER] // MSC_LD:DATACDA_DIG_ATTEMPTS [MTER]
CDA
Digit
al
mtc
Cda
Dig Nr MSC_LD:DATACDA_DIG_ATTEMPTS [MTER]
mtc
Cda
Anlg
SR
% 100 * MSC_GOSAC:DATACDA_ANA_WITH_ANSWER [MTER] // MSC_LD:DATACDA_ANA_ATTEMPTS [MTER]
Succ
ess R
ates (
MTC)
CDA
Analo
gue
mtc
Cda
Anlg Nr MSC_LD:DATACDA_ANA_ATTEMPTS [MTER]
Objec
t
<NE Name>
Tim
e
HH:mm
Data
And
Fax
Ana
lysis
Repo
rt <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
84 E200301-01-714-V10.0I-01
4.1.7.9 MSC Call Flow Report
Report Name: MSC Call Flow Report
Report Short Name: MscCallFlowReport
Target Groups: Network Operation, Network Optimisation, Network Planning, Marketing &Management.
Description: This report aims to support the Operation/Planning of the SSS Network.It provides general information about the load situation at a Mobile SwitchingCentre. It gives an overview of the traffic flow in the MSC distinguishingbetween different types of traffic. The type of traffic depends on the origin anddestination of the related calls.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: MSCVLR
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 85
Layout:
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
86 E200301-01-714-V10.0I-01
Formulas:
(1) Nr of VLR Subscribers = VLR_I:ENTRY_USED_FOREIGN + VLR_I:ENTRY_USED_OWN(2) MORTR = MSC_LD:CALL_ATTEMPTS [MORTR](3) MICTR = MSC_LD:CALL_ATTEMPTS [MICTR](4) Overload Calls (MORTR) = MSC_GOSUC:UNS_OVERLOAD [MORTR](5) Overload Calls [MICTR] = MSC_GOSUC:UNS_OVERLOAD [MICTR](6) Uns. Congestion (MORTR) = MSC_GOSUC:UNS_CONGESTION [MORTR](7) Uns. Service Check (MORTR) = MSC_GOSUC:UNS_SERV_CHECK [MORTR](8) Uns. Req. Dest. Error (MORTR) = MSC_GOSUC:UNS_REQ_DEST_ERR [MORTR](9) Number of TCH Requests (MORTR) = MSC_LD:GEN_TRAFF_CHAN_REQ [MORTR](10) MS Call Forward or Rel. A (MORTR) = MSC_LD:CALL_ATTEMPTS [MORTR] -
- MSC_LD:GEN_TRAFF_CHAN_REQ [MORTR] - MSC_GOSUC:UNS_CONGESTION [MORTR] -- MSC_GOSUC:UNS_OVERLOAD [MORTR] - MSC_GOSUC:UNS_SERV_CHECK [MORTR] -- MSC_GOSUC:UNS_REQ_DEST_ERR [MORTR]
(11) Delta = 100 * (MORTR - Number of TCH Requests (MORTR)) / MORTR(12) TCH Assignment Failures (MORTR) = MSC_LD:GEN_TRAFF_CHAN_REQ [MORTR] - - MSC_GOSSCE:CALL_TCH_ALLOCATION [MORTR](13) TCH Assignment Success Rate (MORTR) = 100 = MSC_GOSSCE:CALL_TCH_ALLOCATION [MORTR] / / MSC_LD:GEN_TRAFF_CHAN_REQ [MORTR](14) Release Before ACM [MICTR] = MSC_GOSUC:REL_BEFORE_ACM [MICTR](15) Completed Interrogations (Originating Calls) = MSC_GOSSCE:COMPL_INTERROGATIONS [MORTR](16) Completed Interrogations (Transit Calls) = MSC_GOSSCE:COMPL_INTERROGATIONS [MICTR] -
- MSC_GOSSCE:CALL_INT_MS_OWN_MSC [MICTR](17) Transit Calls with MSRN or PSTN DN = MTRAN - Completed Interrogations (Transit Calls)(18) Completed Interrogations (Terminating Calls from MICTR) =
= MSC_GOSSCE:CALL_INT_MS_OWN_MSC [MICTR](19) Terminating Calls with MSRN from previous MSC = MTER - Completed Interrogations (Terminating
Calls from MICTR) - Completed Interrogations (Internal Calls)(20) Completed Interrogations (Internal Calls) = MSC_GOSSCE:CALL_INT_MS_OWN_MSC [MORTR](21) Interrogation failures (MORTR) = MSC_LD:STARTED_INTERROGATIONS [MORTR] - - MSC_GOSSCE:COMPL_INTERROGATIONS [MORTR](22) Interrogation failures [MICTR] = MSC_LD:STARTED_INTERROGATIONS [MICTR] - - MSC_GOSSCE:COMPL_INTERROGATIONS [MICTR](23) Interrogation Success rate (MORTR) [%] = 100 * MSC_GOSSCE:COMPL_INTERROGATIONS [MORTR] / / MSC_LD:STARTED_INTERROGATIONS [MORTR](24) Interrogation Success rate [MICTR] [%] = 100 * MSC_GOSSCE:COMPL_INTERROGATIONS [MICTR] /
/ MSC_LD:STARTED_INTERROGATIONS [MICTR](25) MOUT PLMN = MSC_LD:CALL_ATTEMPTS [MOGPL](26) MOUT NOT PLMN = MSC_LD:CALL_ATTEMPTS [MOGNPL](27) MTER = MSC_LD:CALL_ATTEMPTS [MTER](28) MTRAN = MSC_LD:CALL_ATTEMPTS [MTRAN](29) MOC = MSC_LD:CALL_ATTEMPTS [MOGNPL](30) MMC = MOUT PLMN + Completed Interrogations (Internal Calls)(31) MTC = MTER - Completed Interrogations (Internal Calls)(32) BHCA / VLR Subs = (MMC + MOC + MTC) / Nr of VLR Subscribers(33) BHCA / VLR Subs (with transit calls) = (MMC + MOC + MTC + MTRAN) / Nr of VLR Subscribers(34) Call Success Rate [%] = 100 * (MTER + MTRAN + MOUT PLMN + MOUT NOT PLMN) / (MORTR + + MICTR)(35) Mobile Originating Calls (to PSTN) [%] = 100 * MOC / (MMC + MOC + MTC)(36) Mobile To Mobile [%] = 100 * MMC / (MMC + MOC + MTC)(37) Mobile Terminating Calls (from MICTR) [%] = 100 * MTC / (MMC + MOC + MTC)
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 87
4.1.7.10 MSC Handover Flow Report
Report Name: MSC Handover Flow Report
Report Short Name: MscHoFlowReport
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: This report provides information about the MSC controlled handovers. Infor-mation is provided on the number of handovers attempted by each origin cellper target cell.This report can be used to obtain an overview of the traffic flow betweenCells, and the success rates per target Cell.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"
"SPBH Daily Peaks""TEVL"
Input Parameters:
(e) EXCH MSC/VLR Name
Measurements: HOTRF
Remarks: None.
Layout:
MSC Handover Flow Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Number Of HO Success Rateho hoSRNr %
Date Time Object
>85
YYYY
-MM
-DD
HH
:mm
<Orig
in L
AC_C
ell-I
d>:<
Targ
et L
AC_C
ell-I
d>
HO
TRF:
CA_
HO
100
* HO
TRF:
CC
_HO
/ H
OTR
F:C
A_H
O
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
88 E200301-01-714-V10.0I-01
4.2 PS
Throughout this chapter some specific notation was used in order to enable the share of descriptionsbetween reports which apply to different PO versions, namely PO1.0, PO2.0 and PO2.1, or differentnetwork releases, namely GPRS (2G) and UMTS (3G):
Thus, if a column has the indication "PO1" typed in bold, it means that the column only exists if thatreport was executed with data from NEs versions PO1.0 or GR2.0. An analogous interpretation shouldbe applied to columns displaying "PO2" typed in Bold. Furthermore, if a formula is preceded by theindication "PO1:" typed in bold, it means that that formula it's only valid for PO1.0 or GR2.0 equipmentversion, another formula (preceded by "PO2:") describes the same indicator for PO2.0, PO2.1 orGR3.1 equipment version.
The string "[2G + 3G]" inside the counter name field (e.g. attActPdpContext[2G+3G]) means the sum ofthe counters with the same name but measured via different scanners, one scanner for 2G protocolmeasurements and the other for 3G protocol measurements, (e.g. attActPdpContext[2G+3G] =attActPdpContext@sgsn2gSmCurrentData + attActPdpContext@sgsn3gSmCurrentData).
When the execution parameter <xG> appears in the report's title, it means that the report results referonly to one of the two protocols, GPRS (case <xG> = "2G") or UMTS (case <xG> = "3G").
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 89
4.2.1 ATM SP on xGSN
4.2.1.1 GTP Throughput Report
Report Name: GTP Throughput Report
Report Short Name: GtpThputReport
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: This report provides information regarding the number of packets and thethroughput transmitted via GTP (GPRS Tunnelling Protocol) per SP:GTP onany type of GSN, to help determine the efficiency of the network.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""TEVL"
(e) EXCH xGSN Name(f) ATMSW 36140 Name
Input Parameters:
(g) CARD SP Card Name
Measurements: GPRS-gtp
Remarks: None.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
90E200301-01-714-V10.0I-01
Layout:
Out
outThput
kbps
8 * gtpOutSigO
ctets / (1000 * T)
Signalling ThroughputPO2
In
inThput
kbps
8 * gtpInSigOctets / (1000 * T)
Out
outSigPkts
Pkt/s
gtpOutSigPkts / T
Number of SignallingPackets per Second
In
inSigPkts
Pkt/sgtpInSigPkts / T
Out
outThput
kbps
8 * gtpOutD
ataOctets / (1000 * T)
Data ThroughputPO2
In
inThput
kbps
8 * gtpInDataO
ctets / (1000 * T)
Out
outDataPkts
Pkt/s
gtpOutD
ataPkts / T
Number of Data Packetsper Second
In
inDataPkts
Pkt/s
gtpInDataPkts / T
RejectedIncomingPackets
PO2
inRejPkts
Nr
gtpInRejectedPkts
Object
<SP Card N
ame>
Time
HH
:mm
GTP Throughput Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 91
4.2.2 GGSN
4.2.2.1 Virtual Router Load Report
Report Name: Virtual Router Load Report
Report Short Name: VggsnLoadReport
Target Groups: Network Operation, Network Optimisation.
Description: Each virtual router is configured with a maximum number of simultaneoussessions, a maximum throughput and an IP address range. This report ena-bles the detection of problems related to the session establishment due toviolations of the maximum number of simultaneous sessions or due to lack ofIP addresses. It also detects situations of routing failures, which can be rela-ted to overload or destination error.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
(e) EXCH GGSN Name(f) ATMSW 36140Name(g) CARD SP Card Name
Input Parameters:
(h) VRINDEX Virtual Router Index
Measurements: GPRS-gi
Remarks: None.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
92E200301-01-714-V10.0I-01
Layout:
Number ofSessionsThresholdExceeded
sessThExcd
Nr
giNbrSessU
pperthresholdExceed
Number ofRefused
Sessions dueto lack of
IP Address
lackIpAdd
Nr
giNbrO
fRefusedSessionsLackIpAddress
Total Number of RefusedSessions
refSess
Nr
giNbrR
efusedSess
Number ofSessions
Established
sucSess
NrgiN
brSuccSess
Downlink
routSRDL
%
100 * giNbrPosD
ownlinkPackets /
/ (giNbrPosD
ownlinkPackets +
+ giNbrN
egDow
nlinkPackets)
Routing Success Rate
Uplink
routSRUl
%
100 * giNbrPosU
plinkPackets // (giN
brPosUplinkPackets +
+ giNbrN
egUplinkPackets)
Downlink
routFailDl
Pkt/s
giNbrN
egDow
nlinkPackets / T
Packet RoutingFailures per Second
Uplink
routFailUl
Pkt/s
giNbrN
egUplinkPackets / T
Downlink
sucRoutDl
Pkt/s
giNbrPosD
ownlinkPackets / T
Packets per SecondSuccessfully Routed
Uplink
sucRoutUl
Pkt/s
giNbrPosU
plinkPackets / T
Object
<Virtual Router Index>
Time
HH
:mm
Virtual Router Load Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 93
4.2.2.2 ISP Session Analysis Report
Report Name: ISP Session Analysis Report
Report Short Name: IspSessionReport
Target Groups: Network Operation, Network Optimisation, Marketing & Management.
Description: This report provides a detailed analysis of ISP sessions per virtual router,including the related statistics regarding activation, deactivation and modifica-tion of sessions.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
(e) EXCH GGSN Name(f) ATMSW 36140Name(g) CARD SP CARD Name
Input Parameters:
(h) APN Access Point Name
Measurements: GPRS-apn
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
94 E200301-01-714-V10.0I-01
Layout:
Modif
icatio
nspe
r Ses
sion
mod
Sess
Nr tspscApnSuccModifySessions // tspscApnSuccActivateSessions
Modif
icatio
nSu
cces
sRa
te
mod
SR % 100 * tspscApnSuccModifySessions // tspscApnAttModifySessions
Numb
er of
Sess
ions
Modif
ied
sess
Mod
Nr tspscApnSuccModifySessionsGG
SN
deac
SRGg
sn
% 100 * tspscApnSuccDeactivateSessionsGgsn // tspscApnAttDeactivateSessionsGgsn
Deac
tivati
onSu
cces
s Rate
MS deac
SRMs % 100 * tspscApnSuccDeactivateSessionsMs /
/ tspscApnAttDeactivateSessionsMs
GGSN
sess
Deac
Ggsn
Nr tspscApnSuccDeactivateSessionsGgsn
Numb
er of
Ses
sions
Deac
tivate
d
MS sess
Deac
Ms
Nr tspscApnSuccDeactivateSessionsMs
Activ
ation
Succ
ess R
ateDy
nami
c PDP
sess
Act
DynS
R
% 100 * tspscApnSuccActivateSessionsDyn // tspscApnAttActivateSessionsDyn
Numb
er of
Sess
ions
Activ
ated
Dyna
mic P
DP
sess
ActD
yn
Nr tspscApnSuccActivateSessionsDyn
Activ
ation
Succ
ess
Rate
actS
R
% 100 * tspscApnSuccActivateSessions // tspscApnAttActivateSessions
Numb
er of
Sess
ions
Activ
ated
sess
Act
Nr tspscApnSuccActivateSessions
Objec
t
<Access Point Name>
Tim
e
HH:mm
ISP
Sess
ion
Analy
sis R
epor
t <AG
GREG
ATIO
N>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 95
4.2.3 ATM MP on SGSN
4.2.3.1 MP Overload
4.2.3.1.1 SGSN Uplink MP Overload Report
Report Name: SGSN Uplink MP Overload Report
Report Short Name: SgsnUpMpOvloadReport
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: For GPRS the report provides detailed information regarding the overloadhandling on the LLC layer. The results include the number of rejected PDPcontext activations due to overload control (only for PO2.0 on), the number ofdiscarded packets due to overload control, and, transmission rates for LLCand SNDCP packets.The SNDCP packets transmitted represent the chargeable service provided tothe subscribers. The SNDCP packets are transmitted uplink to the serviceaccess point defined by the PDP context received.LLC frames are transparent to the BSS and they transmit to the peer layer inthe MS the user data compressed received from the SNDCP layer SAP alongwith signalling data for GMM functions. LLC frames have variable numbers ofbytes and their transmission rates represent the efficiency in the use of theradio interface.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"TEVL"
Input Parameters:
(e) EXCH SGSN Symbolic Name
Measurements: sgsnFAIcurrentDatasgsnLLCcurrentDatasgsnOverloadPdShCurrentDatasgsnSNDCPcurrentData
Remarks: None.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
96E200301-01-714-V10.0I-01
Layout:
RejectedPDP Context
ActivationHigh Priority
PO2
rejActHiPrio
Nr
rejActPdpCtxH
ighPriority
RejectedPDP Context
ActivationLow Priority
PO2
rejActLoPrio
Nr
rejActPdpCtxLow
Priority
Rejected IuEstablishment
RequestsPO2
rejIuEstReq
Nr
rejIuEstablishmentR
equestDiscarded
SMS
disSms
NrdisSm
sMO
DiscardedData Packets
(SMS andSNDCP)
disDataPkts
Nr
disDataPacketsU
L
DiscardedMM
Requests
disMmReq
Nr
disMM
Request
Discarded traffic
ErrorLLC
Frames
llcErrFrm
Nr
llcErrorFramesR
eceivedUL
LLCSuccess
Rate
llcSR
%
100 * llcFramesR
eceivedSucc // llcFram
esReceived
Handled LLCFrames with
Success
llcFrmSuc
Nr
llcFramesR
eceivedSucc
Incoming Traffic
Handled LLCFrames
llcFrm
Nr
llcFramesR
eceived
Object
<SGSN
Nam
e>
Time
HH
:mm
SGSN Uplink MP Overload Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 97
Layout (cont):
SNDC
PSu
cces
s Rate
sndc
pSR
%
100 * (uplinkNpduNackPktsSucc ++ uplinkNpduAckPktsSucc) /
/ (uplinkNpduNackPkts ++ uplinkNpduAckPkts)
User
Data
Thro
ughp
ut
sndc
pThp
ut
kbps 8 * (uplinkNpduNackOctets +
+ uplinkNpduAckOctets) / (1000 * T)Ha
ndled
SND
CPPa
ckets
with
Succ
ess
sndc
pPkt
sSuc
Nr uplinkNpduNackPktsSucc ++ uplinkNpduAckPktsSucc
Hand
led S
NDCP
Pack
ets
sndc
pPkt
s
Nr uplinkNpduNackPkts ++ uplinkNpduAckPkts
SMS
MOAt
tempts
smsM
oAtt
Nr attSmsMO[2G+3G]
PDP
Conte
xtMo
difica
tion A
ttemp
tsMS
-Initia
tedPO
2
mod
AttM
s
Nr attModPdpContextMs[2G+3G]
Outgo
ing tr
affic
PDP
Conte
xtAc
tivati
onAt
tempts
actA
tt
Nr PO1: attActPdpContextPO2: attActPdpContext[2G+3G]
Objec
t
<SGSN Name>
Tim
e
HH:mm
SGSN
Upl
ink M
P Ov
erlo
ad R
epor
t <AG
GREG
ATIO
N>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
98 E200301-01-714-V10.0I-01
4.2.3.1.2 SGSN Downlink MP Overload Report
Report Name: SGSN Downlink MP Overload Report
Report Short Name: SgsnDownMpOvloadReport
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: The purpose of this report is similar to the previous except it analysis the loadon the downlink direction per SGSN.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"TEVL"
Input Parameters:
(e) EXCH SGSN Symbolic Name
Measurements: sgsnFAIcurrentDatasgsnLLCcurrentDatasgsnSNDCPcurrentData
Remarks: None.
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-0199
Layout:
LLC SuccessRate
llcSR
%
100 * llcFramesSentSucc /
/ llcFramesSent
HandledLLC Frameswith Success
llcFrmSuc
Nr
llcFramesSentSucc
Outgoing Traffic
HandledLLC Frames
llcFrm
Nr
llcFramesSent
DiscardedData Packets
(SMS and SNDCP)PO2
disDataPkts
Nr
disDataPacketsD
L
Discarded Traffic
Error LLCFrames
llcErrFrm
Nr
llcErrorFramesR
eceivedDL
HandledSNDCPPackets
sndcpPkts
Nr
downlinkN
pduNackPkts +
+ downlinkN
pduAckPkts
SMS MOSuccesses
smsMoS
Nr
PO2: succSm
sMO
[2G+3G
]PO
1: succSmsM
O
Incoming Traffic
User DataThroughput
thput
kbps
8 * (downlinkN
pduNackO
ctets ++ dow
nlinkNpduAckO
ctets) / (1000*T)
Object
<SGSN
Nam
e>
Time
HH
:mm
SGSN Downlink MP Overload Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
100 E200301-01-714-V10.0I-01
4.2.3.2 SGSN Licence Violations Report
Report Name: SGSN Licence Violations Report
Report Short Name: SgsnLicViolReport
Target Groups: Network Operation, Network Optimisation, Marketing & Management.
Description: This report monitors violation of the parameters of the SGSN licenses, namelynumber of attached subscribers, number of attached camel subscribers,number of simultaneous sessions and throughput. Warnings related withthese license violations are also provided via QoS Alarms on the SGSN. ForGPRS, it provides information on user data throughput in each direction(uplink and downlink).
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
Input Parameters:
(e) EXCH SGSN Simbolic Name
Measurements: sgsn2gGMMAFcurrentData and/or sgsn3gGMMAFcurrentDatasgsn2gSMcurrentData and/or sgsn3gSMcurrentDatasgsnFAIcurrentDatasgsnSNDCPcurrentData
Remarks: None.
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01101
Layout:
Number ofDiscarded
Packets dueto Buffer
Congestion
disPktsBufCong
Nr
nbrDisD
ataPackets
LimitThroughputViolations
thputVio
Nr
licViolCongestionC
ontrol
Downlink
thputDl
Mbps
8 * (downlinkN
pduNackO
ctets ++ dow
nlinkNpduAckO
ctets) / (1000000 * T)
User Data Throughput(Only 2G)
Uplink
thputUl
Mbps
8 * (uplinkNpduN
ackOctets +
+ uplinkNpduAckO
ctets) / (1000000 * T)
Limit ofSimultaneous
SessionsViolations
sessVio
Nr
licViolActPDPC
ontext
MeanNumber ofSessions
avgSess
Nr
PO1: m
eanActPDPC
ontext[2G + 3G
]PO
2: meanActPD
PContextH
ighPriority[2G + 3G
] ++ m
eanActPDPC
ontextLowPriority[2G
+ 3G]
PO2
Nr
licViolCam
el2G + licViolC
amel3G
Limit of AttachedCamel Subscribers
violations
(only 2G)PO1
atchCamVio
Nr
licViolCam
el
PO2
Nr
meanN
brCam
elSub[2G + 3G
]
Mean Numberof Attached
Camel Subscribers
(only 2G)PO1
avgAttchCamSubs
Nr
meanN
brCam
elSub
Limit ofAttached
Subscribersviolations
atchVio
Nr
licViolSubscribers
MeanNumber
of AttachedSubscribers
avgAtchSubs
Nr
meanN
brOfAttachedSub[2G
+ 3G]
Object
<SGSN
Nam
e>
Time
HH
:mm
SGSN Licence Violations Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
102 E200301-01-714-V10.0I-01
4.2.3.3 Reports with 2nd and 3rd Generation variants
4.2.3.3.1 SGSN Session Analys is Report
Report Name: SGSN Session Analysis Report
Report Short Name: SgsnSessionReport
Target Groups: Network Operation, Network Optimisation.
Description: The report provides detailed analysis of the session handling per SGSN. Itsupplies statistics regarding session activation, update, modification, averageduration, etc. Separated indicators depending on session priority are providedfor equipment versions greater than PO1.0.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
(e) xG "2G""3G"
Depending on the para-meter, a report will beproduced either with thecounters fromsgsn2gSMcurrentData orwith the counters fromsgsn3gSMcurrentData.Furthermore, columnsdescribed in the headerfield with "Only 2G" arefiltered if option 3G isselected.
Input Parameters:
(f) EXCH SGSN SymbolicName
Measurements: sgsn2gSMcurrentData or sgsn3gSMcurrentData
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 103
Layout:
SGSN
deac
SRSg
sn % 100 * succDeactPdpContextSgsn // attDeactPdpContextSgsn
Deac
tivati
on S
ucce
ss R
ate
MS
deac
SRMs % 100 * succDeactPdpContextMs / attDeactPdpContextMs
SGSN
sess
Deac
Sgsn Nr succDeactPdpContextSgsn
Numb
er of
Ses
sions
Deac
tivate
d
MS
sess
Deac
Ms Nr succDeactPdpContextMs
Activ
ation
Succ
ess R
ateDy
nami
c PDP
sess
Act
DynS
R
% 100 * succActPdpContextDyn / attActPdpContextDyn
Numb
er of
Sess
ions
Activ
ated
Dyna
mic P
DP
sess
ActD
yn
Nr succActPdpContextDyn
Activ
ation
Succ
ess
Rate
actS
R
%
PO1: 100 * succActPdpContext / attActPdpContextPO2: 100 * (succActPdpContextHighPriority +
+ succActPdpContextLowPriority) / attActPdpContext
PO1
sess
Act
Nr succActPdpContext
Low
PO2
sess
Act
LoPr
io
Nr succActPdpContextLowPriority
Numb
er of
Ses
sions
Acti
vated
High
PO2
sess
Act
HiPr
io
Nr succActPdpContextHighPriority
Objec
t
<SGSN Name>
Tim
e
HH:mm
SGSN
<xG>
Ses
sion
Analy
sis R
epor
t <AG
GREG
ATIO
N>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
104 E200301-01-714-V10.0I-01
Layout (cont):
Mean
Ses
sion
Dura
tion
avgS
essD
ur
sec PO1: T * meanActPdpContext / succActPdpContext
PO2: totalPdpContextDuration // (succActPdpContextHigh + succActPdpContextLow)
PO1
avgS
ess
Nr meanActPdpContext
Low
PO2
avgS
ess
LoPr
io
Nr meanActPdpContextLowPriority
Mean
Num
ber o
f Ses
sions
High
PO2
avgS
ess
HiPr
io
Nr meanActPdpContextHighPriority
Upda
tes pe
rSe
ssion
PO2
updS
ess
Nr
(succUpdPdpContextSgsn ++ succUpdPdpContextGgsn) /
/ (succActPdpContextHighPriority ++ succActPdpContextLowPriority)
Upda
teSu
cces
sRa
tePO
2
updS
r
%
100 * (succUpdPdpContextSgsn ++ succUpdPdpContextGgsn) // (attUpdPdpContextGgsn ++ attUpdPdpContextSgsn)
Numb
er of
Sess
ions
Upda
tedPO
2
sess
Upd
Nr succUpdPdpContextSgsn + succUpdPdpContextGgsn
Modif
icatio
nspe
r Ses
sion
mod
Sess
Nr
PO1: succModPdpContext / succActPdpContextPO2: 100 * (succModPdpContextSgsn +
+ succModPdpContextMs) // (succActPdpContextHighPriority ++ succActPdpContextLowPriority)
Modif
icatio
nSu
cces
sRa
te
mod
SR %
PO1: 100 * succModPdpContext / attModPdpContextPO2: 100 * (succModPdpContextSgsn +
+ succModPdpContextMs) / (attModPdpContextMs ++ attModPdpContextSgsn)
Numb
er of
Sess
ions
Modif
ied
sess
Mod
Nr
PO1: succModPdpContextPO2: succModPdpContextSgsn +
+ succModPdpContextMs
Objec
t
<SGSN Name>
Tim
e
HH:mm
SGSN
<xG>
Ses
sion
Analy
sis R
epor
t AGG
REGA
TION
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 105
4.2.3.3.2 SGSN Performance Analysis Report
Report Name: SGSN Performance Analysis Report
Report Short Name: SgsnPerfReport
Target Groups: Network Operation, Network Optimisation Network Planning.
Description: Provided by this report is a general overview of the SGSN performance. Thisincludes information on: number of subscribers in SGSN area, average numberof sessions, short message service, routing area updates and attach anddetach success rates.For GPRS it also provides information regarding average throughput, numberof kbytes per session along with paging success rate.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
(e) xG "2G""3G"
Depending on the parame-ter, a report will be producedeither with the counters fromsgsn2gGMMAFcurrentData,sgsn2gSMcurrentData andra2gGMMAFcurrentData orwith the counters fromsgsn3gGMMAFcurrentData,sgsn3gSMcurrentData andra3gGMMAFcurrentData.Furthermore, columnsdescribed in the header fieldwith "Only 2G" are filtered ifoption 3G is selected.
Input Parameters:
(f) EXCH SGSN SymbolicName
Measurements: ra2gGMMAFcurrentData or ra3gGMMAFcurrentDatara2gGMMTFcurrentDataraPagingCurrentData (only PO2.0)sgsn2gGMMAFcurrentData or sgsn3gGMMAFcurrentDatasgsn2gSMcurrentData or sgsn3gSMcurrentDatasgsn2gSMScurrentData (if <xG>=2G) or sgsn3gSMScurrentData (only PO2.0)sgsnGMMAFcurrentDatasgsnGMMTFcurrentData (if <xG>=2G)sgsnSNDCPcurrentData (if <xG>=2G)
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
106 E200301-01-714-V10.0I-01
Layout:
PO2 If <xG> = 2G Then 100 * succPsPagingProc2G /
/ attPsPagingProc2G Else 100 * succPsPagingProc3G / attPsPagingProc3G
Pagin
g Suc
cess
Rate
PO1
(only
2G) pa
gSR
%
100 * succPsPaging / attPsPagingDo
wnlin
k
kbyS
essD
l
kbyt
e
PO1: (downlinkNpduAckOctets ++ downlinkNpduNackOctets) *
* meanActPDPContext / (1000 * succActPdpContext)PO2: (downlinkNpduAckOctets +
+ downlinkNpduNackOctets) ** (meanActPDPContextHighPriority ++ meanActPDPContextLowPriority) /
/ (1000 * (succActPdpContextHighPriority ++ succActPdpContextLowPriority)
Aver
age N
umbe
r of k
bytes
per S
essio
n(O
nly 2G
)
Uplin
k
kbyS
essU
l
kbyt
e
PO1: (uplinkNpduAckOctets+ uplinkNpduNackOctets) ** meanActPDPContext / (1000 * succActPdpContext)
PO2: (uplinkNpduAckOctets+ uplinkNpduNackOctets) ** (meanActPDPContextHighPriority ++ meanActPDPContextLowPriority) /
/ (1000 * (succActPdpContextHighPriority +succActPdpContextLowPriority)
Down
link
thpu
tSub
Read
yDl
bps 8 * (downlinkNpduAckOctets +
+ downlinkNpduNackOctets) / (T *nbrSubReady)
Aver
age T
hrou
ghpu
t per
Sub
scrib
erRe
ady (
Only
2G)
Uplin
k
thpu
tSub
Read
yUl
bps 8 * (uplinkNpduAckOctets + uplinkNpduNackOctets) /
/ (T*nbrSubReady)
Mean
Numb
erof
Sess
ions
avgS
ess
Nr
PO1: meanActPDPContextPO2: meanActPDPContextHighPriority +
meanActPDPContextLowPriority
Total
Num
ber
of Su
bscri
bers
Loca
ted in
SGSN
Are
a
subs Nr meanNbrHomeSub + meanNbrVistingNatSub +
+ meanNbrVisitingForeign
Objec
t
<SGSN Name>
Tim
e
HH:mm
SGSN
<xG>
Per
form
ance
Ana
lysis
Repo
rt AG
GREG
ATIO
NSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 107
Layout (cont):
Sess
ionAc
tivati
onSu
cces
s Rate
actS
R
%
PO1: 100 * succActPdpContext / attActPdpContextPO2: 100 * (succActPdpContextHigh +
+ succActPdpContextLow) / attActPdpContext
Resp
onse
from
HLR
Succ
ess R
ate
hlrR
esSR
%
PO1: 100 * succReqAuthSetsHlr / attReqAuthSetsHlrPO2: 100 * (succReqAuthSetsHlrV1 +
+ succReqAuthSetsHlrV3) / (attReqAuthSetsHlrV1 ++ attReqAuthSetsHlrV3)
Routi
ng A
rea
Upda
teSu
cces
s Rate
raUp
dSR
%100 * (succInterSgsnRaUpdate +
+ succIntraSgsnRaUpdate) / (attInterSgsnRaUpdate + + attIntraSgsnRaUpdate)
PO2
SMS
MT S
ucce
ss R
ate
PO1
(only
2G)
smsM
tSR
% 100 * succSmsMt / attSmsMt
PO2
SMS
MO S
ucce
ss R
ate
PO1
(only
2G)
smsM
oSR
% 100 * succSmsMo / attSmsMo
Detac
h Fro
mMS
Rate
msD
tchR
ate
% 100 * attGprsDetachMs / (attGprsDetachMs ++ attGprsDetachSgsn)
Attac
hSu
cces
s Rate
atch
SR % 100 * succGprsAttach / attGprsAttach
Objec
t
<SGSN Name>
Tim
e
HH:mm
SGSN
<xG>
Per
form
ance
Ana
lysis
Repo
rt AG
GREG
ATIO
NSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
108 E200301-01-714-V10.0I-01
4.2.3.3.3 SGSN Nominal Load Report
Report Name: SGSN Nominal Load Report
Report Short Name: SgsnNomLoadReport
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: This report will provide information concerning subscriber behaviour in order toobtain a realistic traffic model.This report will provide a set of statistic results to be compared with the nodespecifications. The information included is related to both number of subscri-bers and the processes run by the Node such as attach, detach, routing areaupdates, paging, activation and deactivation. Furthermore for GPRS the reportwill supply information regarding the amount of handled packages and userdata throughput in both directions.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
(e) xG "2G""3G"
Depending on the parame-ter, a report will be produ-ced either with the countersfromsgsn2gGMMAFcurrentData,sgsn2gSMScurrentData,ra2gGMMTFcurrentData,sgsn2gSMcurrentData andra2gGMMAFcurrentData orwith the counters fromsgsn3gGMMAFcurrentData,sgsn3gSMcurrentData andra3gGMMAFcurrentData.Furthermore, columns des-cribed in the header fieldwith "Only 2G" are filtered ifoption 3G is selected.
Input Parameters:
(f) EXCH SGSN SymbolicName
Measurements: ra2gGMMAFcurrentData or ra3gGMMAFcurrentDatara2gGMMTFcurrentData (if <xG>=2G)raPagingCurrentData (only PO2.0)sgsn2gGMMAFcurrentData or sgsn3gGMMAFcurrentDatasgsn2gSMcurrentData or sgsn3gSMcurrentDatasgsn2gSMScurrentData (if <xG>=2G) or sgsn3gSMScurrentData (only PO2.0)sgsnSNDCPcurrentData (if <xG>=2G)
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 109
Layout:
Mean
Num
ber
of Se
ssion
s
avgS
ess
Nr
PO1: meanActPDPContextPO2: meanActPDPContextHigh +
+ meanActPDPContextLow
PO2 If <xG> = 2G Then attPsPagingProc2G / T
Else attPsPagingProc3G / T
PS P
aging
Pro
cedu
res
per S
econ
d
PO1
(only
2G) ps
Page
Sec
Nr
attPsPaging / T
Routi
ng A
rea
Upda
tes pe
rSe
cond
raUp
dSec
Nr (attInterSgsnRaUpdate ++ attIntraSgsnRaUpdate) / T
Attac
h and
Deta
chpr
oced
ures
per S
econ
d
atch
Dtch
Sec
Nr (attGprsAttach + attGprsDetachMs ++ attGprsDetachSgsn) / T
Mean
Num
ber
of At
tache
dSu
bscri
bers
avgA
tchS
ubs
Nr meanNbrOfAttachedSub
Total
Num
ber
of Su
bscri
bers
Loca
ted in
SGSN
Are
a
subs Nr
meanNbrHomeSub ++ meanNbrVistingNatSub ++ meanNbrVisitingForeign
Objec
t
<SGSN Name>
Tim
e
HH:mm
SGSN
<xG>
Nom
inal
Load
Rep
ort A
GGRE
GATI
ONSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
110 E200301-01-714-V10.0I-01
Layout (cont):
Down
link
thpu
tDl
kbps 8 * (DownlinkNpduNackOctets +
+ DownlinkNpduAckOctets) / (1000*T)
User
Data
Thr
ough
put
(Only
2G)
Down
link
thpu
tUl
kbps 8 * (uplinkNpduNackOctets +
+ uplinkNpduAckOctets) / (1000*T)
Down
link
sndc
pPkt
sSec
Dl
Pkt/s (downlinkNpduNackPkts +
+ downlinkNpduAckPkts) / T
Hand
led S
NDCP
Pac
kets
per S
econ
d(O
nly 2G
)
Uplin
k
sndc
pPkt
sSec
Ul
Pkt/s (uplinkNpduNackPkts + uplinkNpduAckPkts) / T
PO2
SMS
per S
econ
d
PO1
(only
2G) sm
sSec
Nr (attSmsMt + attSmsMo) / T
GGSN
initia
tedDe
activ
ation
spe
r Sec
ond
ggsn
Deac
Sec
Nr attDeactPdpContextGgsn / T
Sess
ion A
ctiva
tion
Deac
tivati
ons
Proc
edur
es pe
rSe
cond
actD
eacS
ec
Nr (attActPdpContext + attDeactPdpContextMs ++ attDeactPdpContextGgsn) / T
Objec
t
<SGSN Name>
Tim
e
HH:mm
SGSN
<xG>
Nom
inal
Load
Rep
ort A
GGRE
GATI
ONSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 111
4.2.3.4 Cisco based GGSN Reports
4.2.3.4.1 APN Performance Report
Report Name: APN Performance Report
Report Short Name: Apn_perf_rep
Target Groups: Network Operation
Description: This report presents APN performance data.
Name Possible Values Remarks
(g) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(h) START_DATE Any date(i) END_DATE Any date(j) AGGREGATION "TEVL"
"DTOT"
Input Parameters:
(k) APN APN NameMeasurements: C_GPRSAPN
Remarks: None
Layout Content:
Report presents:
MSACTIVPDPS
SUCCACTIVPDPS ACTIVEPDPS UPSTRMTRAFFVO
L UPSTRMTRAFFVOL
Nr Nr Nr bps bps
4.2.3.4.2 GGSN Performance Report
Report Name: GGSN Performance Report
Report Short Name: ggsn_perf_rep
Target Groups: Network Operation
Description: This report presents GGSN performance data.
Name Possible Values Remarks
(l) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(m) START_DATE Any date
Input Parameters:
(n) END_DATE Any date
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
112 E200301-01-714-V10.0I-01
(o) AGGREGATION "TEVL""DTOT"
(p) GGSN GGSN NameMeasurements: C_GPRSGGSN
Remarks: None
Layout Content:
Report presents:
TOTCREATPDPS
TOTDELETEPDPS
ACTIVEREJPDPS OUTRESPDPS TOTPPPPDCR
EATTOTPPPPDPDELE
T
Nr Nr Nr Nr Nr Nr
4.2.3.4.3 GTP Throughput Report
Report Name: GTP Throughput Report
Report Short Name: Gtp_throughput_rep
Target Groups: Network Operation
Description: This report presents GTP performance data.
Name Possible Values Remarks
(q) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(r) START_DATE Any date(s) END_DATE Any date(t) AGGREGATION "TEVL"
"DTOT"
Input Parameters:
(u) GGSN GGSN NameMeasurements: C_GPRSGTP
Remarks: None
Layout Content:
Report presents:
SENTGPDUS RECVGPDUS SENTSIGMSGS RECVDSIGMSGS
Pkt/s Pkt/s Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 113
4.3 VAS
The MSP – Mobile Smart Proxy is currently the only platform supported.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
114 E200301-01-714-V10.0I-01
4.3.1 MSP
Report Name: MSP Service Layer Report
Report Short Name: msp_service_layer_rep
Target Groups: Network Operation
Description: This report presents all the MSP Service Layer performance data.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "TEVL"
"DTOT"
Input Parameters:
(e) MSP NE NameMeasurements: MSPSERVICE
Remarks: none
Layout:
MSC Service Layer ReportStart Date: <START_DATE>
End Date: <END_DATE>
CCGNotDefinedByUserAgent
RetrievalAGFromAuthServerFailed
AGNotInIPRanges
PerformanceClassNotDefined
UnknownAGFromAuthServerRetrieved
Nr Nr Nr Nr NrDate Time Object
YYYY
-MM
-DD
HH
:mm
NE
Nam
e
Num
ber o
f tim
es th
e C
CG
has
not
bee
nde
fined
Num
ber o
f tim
es th
e re
triev
al o
f an
AG fr
omth
e Au
then
ticat
ion
Serv
er h
as fa
iled
Num
ber o
f tim
es th
e AG
is n
ot w
ithin
IPra
nges
Num
ber o
f tim
es th
e th
e Pe
rform
ance
Cla
ssis
not
def
ined
for o
ne U
ser
Num
ber o
f tim
es a
n un
know
n AG
is re
triev
edfro
m th
e Au
then
ticat
ion
Serv
er
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 115
5 Radio Access Netw ork
5.1 GERAN
5.1.1 Base Station Overview Report
Report Name: Base Station Overview Report
Report Short Name: BssOverviewReport
Target Groups: Network Operation, Network Optimisation, Marketing & Management.
Description: This report aims to provide overview information about the load situation andsuccess rates of basic protocol procedures of the GSM Cells both for TCHand for SDCCH channels.Basic problems related to load can be immediately detected as well as indica-tions leading to other more complex problems that need further proceedings,examples of these problems are interference and bad coverage.Additional handover information can also be provided by adding to this reportthe handover information from the "Base Station Handover Analysis Report"in order to give more details about any problems affecting the performance ofthe network.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous days countingfrom today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"DTOT""TEVL"
(e) CH "ALL""TCH""SDCCH"
Case "TCH" only theTCH table will be provi-ded, case "SDCCH" onlythe SDCCH table will beprovided; otherwise, bothwill be provided
(f) BSC BSC Symbolic Name(g) BTS Cell Symbolic Name
Input Parameters:
(h) BSC_TOTALS """BSC Totals"
The results will be pre-sented per BSC, if "BSCTotals" report is chosen.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
116 E200301-01-714-V10.0I-01
Measurements: From SCANBTSOHON functional group:ATINBHDONRUNINHDSUINBHDO
All scanners from SCANBTS functional group, with the following exceptions:AMRCHDISMBTCHAMRMEITCHIBNAVTCHSDNDFTCHSDNNNOTNCHNTCHSDCMTASSATVSTASSUCVSTNMSCNCLTNSUDHSC
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0, but in thatcase, since NRDEFTCH counters are only available from BR6.0 on, the maxi-mum values for NAVTCH counters are used instead as approximation.Furthermore SDCCH HO related indicators aren't available for BR5.5.
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01117
Layout:
TCHMean Holding
Time
tch MHT
sec
>40
<TCH
MH
TDR
>
TCHTrafficCarried
tch Traf Carr
Erl
<TCH
TrafCarrD
R>
TCH Loss Rate(Loss Systems)
tch Loss Rate LS
%
<1
100 * <TCH
LossRateD
R>
Mean Waiting Time
avg Wait T
sec
<5
MD
UR
TCR
Q[1..4] / 4
Load
TCH Loss Rate(Waiting Systems)
tch Loss Rate WS
%
<1
100 * <TCH
LossRateW
SDR
>
TCHEfficiency
tch Eff
%
>98
100 * <TCH
EffDR
>
TCH
Number OfDefined TCH
def Tch
Nr
NR
DEFTC
H[2,5,8,11]
CT
Cell Type (0 - N
ormal; 1 – C
oncentric; 2 - Extended)
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Overview Report <BSC_TOTALS> <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
118 E200301-01-714-V10.0I-01
Layout (cont):
TCH
Drop
s Per
Erlan
g Hou
r
tch
D Er
lh
Nr <4 <TCHDropErlh>
Mean
Tim
eBe
twee
n TCH
Drop
avg
T Be
tw T
ch D
min >60 <MTBTCHDrop>Dr
op
TCH
Drop
Rate
tch
DR % <2 100 * <TCHDropRate>
Impe
rativ
e HO
Rate
Imp
HO R
ate
%
100 * (ATINHIAC[1,2] + ATINHIRC[1..4] ++ ATINBHDO[1..4,11..14,…,311..314]) /
/ (<IntraCellHOAtt> + <InterCellHOAtt> ++ <InterBSCHOAtt>)
HO D
rop
Rate
HO D
R
% <1.5 100 * (<IntraCellHODrop> + UNIHIRLC[1] +
+ <InterBSCHODrop>) / (<IntraCellHOAtt> ++ <InterCellHOAtt> + <InterBSCHOAtt>)Ha
ndov
er
HO S
ucce
ssRa
te
HO S
R
% >90 100 * (<IntraCellHOSucc> + <InterCellHOSucc> +
+ <InterBSCHOSucc>]) / (<IntraCellHOAtt> ++ <InterCellHOAtt> + <InterBSCHOAtt>)
Numb
er of
Succ
essfu
lDi
recte
d Retr
ies
Succ
Dir
Retry
Nr <NoSuccDirectedRetry>
Numb
er O
fSu
cces
sful C
allSe
tup A
ttemp
ts
CS S
ucc
N <CSSucc>
TCH
Call S
etup
Call S
etup
Succ
ess R
ate
CS S
R
% >95 100 * <CSSuccRateBSS>
Objec
t
<Cell Symbolic Name>
Tim
e
HH:mm
Base
Sta
tion
Over
view
Repo
rt <B
SC_T
OTAL
S> <A
GGRE
GATI
ON>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01119
Layout (cont):
SDCCHDrops Per
Erlang Hour
sdcchD Erlh
Nr
<1
<SDC
CH
DropErlh>
Mean TimeBetweenSDCCH
Drop
avgTBetwSdcchD
Min
>500
<MTBSD
CC
HD
rop>Drop
SDCCHDrop Rate
sdcchDR
%
<0.1
100 * <SDC
CH
DropR
ate>
InternalSDCCH
HOSuccess
Rate
sdcchIntHO SR
%
>60
100 * (SISHIN
TR[1] +
+ SISHIN
TE[1]) / (AISHIN
TR[1] +
+ AISHIN
TE[1])
SDCCHActivation
FailureRate
sdcchAct FR
%100 * (<Im
mAssLoss> - ATSD
CM
BS[1])/ /(<Im
mAssAtt> - ATSD
CM
BS[1])
Number OfSuccessfulImmediate
Assignments
immAssSucc
Nr
<Imm
AssSucc>
Immediate Assignment
ImmediateAssignment
SuccessRate
immAssSR
%
>98
100 * <Imm
AssSuccRate>
SDCCHMean
HoldingTime
sdcchMHT
sec
<6
<SDC
CH
MH
T>
SDCCHTrafficCarried
sdcchTrafCarr
Erl
<SDC
CH
TrafCarr>
Load
SDCCHLoss Rate
sdcchLossRate
%
<0.1
100 * <SDC
CH
LossRate>
SDCCHEfficiency
sdcch Eff
%
>98
100 * <SDC
CH
Eff>
SDCCH
Number ofDefinedSDCCH
defSdcch
Nr
ND
ESDC
CH
[2]
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Overview Report <BSC_TOTALS> <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
120 E200301-01-714-V10.0I-01
5.1.2 Base Station Ranking Report
Report Name: Base Station Ranking Report
Report Short Name: BssRankingReport
Target Groups: Network Operation, Network Optimisation, Marketing & Management.
Description: The purpose of this report is to evaluate and compare cell performances usinga unique indicator, namely "Quality Index". This indicator aggregates the keyperformance indicators that give information about the resource usage andabout the subscriber perception related to the quality of a network. Thoseindicators are:• Call Setup Success Rate• TCH Drops per Erlanghour• Probability of Bad Speech Quality• TCH Traffic LoadEach indicator has a weight factor (see Input Parameters) which is a numberbetween 0 and 10 that enables the operator to set the relative relevance ofeach indicator in is concept of cell quality.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"DTOT"(e) BSC BSC Symbolic Name(f) BTS Cell Symbolic Name(g) WCSF Weight of Call Setup
Failure. Any value ≥0and ≤10
Default = 2.5
(h) WTD Weight of TCH Drop.Any value ≥0 and ≤10
Default = 2.5
(i) WBSQ Weight of Bad SpeechQuality. Any value ≥0and ≤10
Default = 2.5
Input Parameters:
(j) WTRW Weight of TCHResource Waste. Anyvalue ≥0 and ≤10
Default = 2.5
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 121
Measurements: From SCANBTS functional group:ATIMASCAATSDCMBSMEBUSTCHNACSUCPRNMSGDISQNRDEFTCHNRFLSDCCNRFLTCHNSUCCHPCSINTHINTSUIMASCATACCBPROTASSATTTASSFAILTASSSUCCUNIHIALCUNIHIRLC
From SCANBTSOHON functional group:ATINBHDONRUNINHDSUINBHDO
From SCANTRX functional groupCFERRXQU
Remarks: The indicator <QualityLink2FER> should always be aggregated to present thedaily values.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
122E200301-01-714-V10.0I-01
Layout:
Base Station Ranking Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Quality IndexFailedCalls
Call SetupSuccess
Rate BSS
TCH Dropsper
Erlanghour
Probabilityof BadSpeechQuality
TCHTrafficLoad
quality IndexFailed Calls
CSSR BSStch Drop Erlh
quality Link2FER
tch TrafLoad
Nr%
Nr%
%
DateTim
eObject
CT
<2>95
<4<5
YYYY-MM-DD
HH:mm
<CellSymbolic Name>
Cell Type (0 - Normal; 1 - Concentric; 2 - Extended)
WCSF * <CSSucc> * (1 - <CSSuccRateBSS>) ^ 2 ++ WTD * <TCHDrop> * <TCHDropErlh> * 90 / T +
+ WBSQ * SUCTCHSE[1,2] * 0.4 * <QualityLink2FER> ^ 2 ++ WTRW * (If <TCHTrafLoad> < 0.05 Then 0.95 Else (1 -
- <TCHTrafLoad>)) * <TCHTrafCarrDR> // (<TCHTrafLoad> * 50)
<CSSucc> * (1 - <CSSuccRateBSS>) + <TCHDrop>
100 * <CSSuccRateBSS>
<TCHDropErlh>
100 * <QualityLink2FER>
<TCHTrafLoad> = 100 * <TCHTrafCarrDR> / NRDEFTCH[2,5,8,11]
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 123
5.1.3 Base Station Grade Of Service Report
Report Name: Base Station Grade Of Service Report
Report Short Name: BssGosReport
Target Groups: Network Operation, Network Optimisation, Network Planning.
Description: This report provides detailed information about the load situation of the GSMCells both for TCH and for SDCCH channels. In addition it provides alsoimportant results for channel resource optimisation like for instance thenumber of defined SDCCH channels, SDCCH traffic carried, the number ofdefined TCH channels and the TCH traffic carried. It also provides severalcalculations using traffic theory formulas both for Waiting systems (Erlang Cformula) and for Loss systems (Erlang B formula).The indicators "TCH ErlangB Blocking Rate", "Delta TCH", "Probability ofWaiting More than WT sec" and "Mean Queue Length for Delta=0", useErlang formulas which only produce accurate results case the statisticalbehaviour of the traffic measured is similar to the statistical behaviourassumed on the traffic theory behind those formulas.The Erlang B formula assumes that the density of traffic during the busy houris fairly constant and the number of calls which exist simultaneously onlyfluctuates statistical around its average value. The question "how far are theseassumptions from the real life traffic?" can be answered after comparing theindicators "TCH Loss Rate (in Loss Systems)" and "TCH Blocking Rate", ifthese indicators present similar values then the assumptions can beconsidered a good approximation to the real traffic.The Erlang C formula makes use of the same assumptions of Erlang Bformula plus three other assumptions: the holding times are exponentiallydistributed, the traffic offered is lower than the number of serving trunks andall call which have to wait always wait until they can be handled. Of coursethis is not real life behaviour of the traffic, but in this case it can also be testedhow far these assumptions are from the truth. So, if the "TCH Loss Rate(Waiting Systems)" is greater than zero the system being analysed is not aproper waiting system and maybe the buffer holding the calls hasn't enoughcapacity or the queue is to long so the capacity will have to be expanded. Bycomparing the "Mean Waiting Time" and "Mean Waiting Time Expected", itcan be stated, case these indicators present similar values, that the two otherassumptions are also realistic. "Delta TCH" provides to the user the difference between the number of TCHdefined in the BTS and the number of TCH required to handle the trafficoffered with upper limits for loss and/or for waiting probabilities defined by theuser. It is calculated both for Waiting systems (Erlang C formula) and for Losssystems (Erlang B formula), and furthermore, it results are provided for allbasic types of channel, namely TCH Full Rate, TCH Half Rate and SDCCH.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
124 E200301-01-714-V10.0I-01
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous days countingfrom today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH TC Peak""SPBH Daily Peaks"
(e) CH "ALL""TCH""SDCCH"
Case "TCH" only the TCHtable will be provided,case "SDCCH" only theSDCCH table will beprovided, otherwise, bothwill be provided
(f) HALF_RATE "YES""NO"
Case "YES", also theindicators variants relatedwith Half Rate channelswill be included in thereport, otherwise, just theFull Rate indicators andthe ones independentfrom the type of channelare displayed.
(g) WS_LS_OR_BOTH "BOTH""WS""LS"
Case "LS", load indica-tors specified only for losssystems will be provided.Case "WS", load indica-tors specified only forwaiting systems will beprovided. Otherwise bothwill be presented on thereports.
(h) BSC BSC Symbolic Name(i) BTS Cell Symbolic Name(j) ADMISSIBLE_LOSS Max TCH Loss Rate Default = 1 %(k) SDCCH_
ADMISSIBLE_LOSSMax SDCCH LossRate
Default = 0.1 %
(l) WT Admissible waitingtime in seconds forcalls in queue.
Default = 10 secThis value is a configura-tion parameter of BSCbut for the report anyother value can beassumed
Input Parameters:
(m) WP Max Probability ofWaiting More thanWT sec
Default = 4 %
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 125
Measurements: From SCANBTS functional group:AALTCHTIASDCALTIATCHSMBSATSDCMBSATTCHSEIMBUSYSDCMDURTCRQMEBUSTCHMTCHBUTIMTCHQLENNASUSDPENATTSDPENAVSDCCHNAVTCHNDESDCCHNMSGDISQNRDEFTCHSUCTCHSETASSATTTASSFAILTASSSUCCTNTCHCL
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0, but in thatcase, since NRDEFTCH counters are only available from BR6.0 on, the maxi-mum values for NAVTCH counters are used instead as approximation.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
126E200301-01-714-V10.0I-01
Layout:
DeltaTCH Half
LS deltaTch H
Nr
>0
NR
DEFTC
H[5,11] -
- ErlangB(<TCH
TrafCarrH
R>, LO
SS)
DeltaTCH Full
LS deltaTch F
Nr
>0
NR
DEFTC
H[2,8] -
- ErlangB(<TCH
TrafCarrFR
>, LOSS)
TCH ErlangBBlocking Rate
Half
LS tch ErlBBlock Rate H
%
<1
100 * <TCH
ErlBlockRateH
R>
TCH ErlangBBlocking Rate
Full
LS tch ErlBBlock Rate F
%
<1
100 * <TCH
ErlBlockRateFR
>
TCH TrafficOffered
LS tch TrafOff DR
Erl
<TCH
TrafOffD
R>
TCH TrafficUtilisation
LS tchTraf Util
%
100 * <TCH
TrafUtilD
R>
Loss Systems
TCHLoss Rate
LS tchLoss Rate
%
<1
100 * <TCH
LossRateD
R>
TCHTrafficCarried
tchTraf Carr
Erl
<TCH
TrafCarrD
R>
TCHBlocking
Rate
tch BlockRate
%
<1
100 * <TCH
BlockRateD
R>
NumberOf
DefinedTCH Half
defTch H
Nr
NR
DEFTC
H[5,11]
TCH
NumberOf
DefinedTCH Full
defTch F
Nr
NR
DEFTC
H[2,8]
CT
Cell Type (0 - N
ormal; 1 - C
oncentric; 2 - Extended)
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Grade Of Service Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 127
Layout (cont):
Mean
Que
ueLe
ngth
forDe
lta=0
WS
mea
nQue
Len
ifDelt
a=0
Nr ErlangC(AH, NF, <TCHMHTFR>) ++ ErlangC(AF, NH, <TCHMHTHR>)
Delta
TCH
Half
WS
Delta
H
Nr >0
NRDEFTCH[5,11] - NHNH = ErlangC(WT, WP, AH, <TCHMHTHR>)
Delta
TCH
Full
WS
Delta
F
Nr >0
NRDEFTCH[2,8] - NFNF = ErlangC(WT, WP, AF, <TCHMHTFR>)
Prob
abilit
y of
Wait
ing M
ore
than W
Tse
c Half
Wait
Prob
forW
T H
% <10 100 *
* ErlangC(WT, NRDEFTCH[5,11], AH,<TCHMHTHR>)
Prob
abilit
y of
Wait
ing M
ore
than W
Tse
c Full
Wait
Prob
forW
T F
% <10 100 *
* ErlangC(WT, NRDEFTCH[2,8], AF,<TCHMHTFR>)
Mean
Wait
ingTim
eEx
pecte
d
mea
n W
aitT
Expc
sec
<5
(<TCHMHTHR> / (NRDEFTCH[5,11] - AH) ++ <TCHMHTFR> / (NRDEFTCH[2,8] - AF)) / 2
Mean
Wait
ingTim
e
mea
nW
aitT
sec
<5 MDURTCRQ[1..4] / 4
TCH
Traff
icOf
fered
WSt
chTr
afOf
f
Erl AH + AF
AH = <TCHTrafCarrHR> / (1-<TCHLossRateWSHR>)AF = <TCHTrafCarrFR> / (1-<TCHLossRateWSFR>)
TCH
Traff
icUt
ilisati
on
WSt
chTr
afUt
il
% 100 * <TCHTrafUtilDR (8; ErlangC)>
Mean
Que
ueLe
ngth
WSM
eaQu
eLen
Nr MTCHQLEN[1,2]
TCH
Wait
ing S
ystem
s
TCH
Loss
Rate
WSt
chLo
ssRa
te
% <1 100 * <TCHLossRateWSDR>
Objec
t
<Cell Symbolic Name>
Tim
e
HH:mm
Base
Sta
tion
Grad
e Of S
ervic
e Rep
ort <
AGGR
EGAT
ION>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
128E200301-01-714-V10.0I-01
Layout (cont):
SDCCHMean
Holding Time
sdcch MHT
Sec
<6
<SDC
CH
MH
T>
DeltaSDCCH
sdcch delta
Nr
>0
ND
ESDC
CH
[3] -- ErlangB(<SD
CC
HTrafC
arr>, SDLO
SS)SDCCHErlangB
Blocking Rate
sdcch ErlBlock Rate
%
<0.1
100 * <SDC
CH
ErlBlockRate>
SDCCHTrafficOffered
sdcchTraf Off
Erl
<SDC
CH
TrafOff>
SDCCHTraffic
Utilisation
sdcchTraf Util
%
100 * <SDC
CH
TrafUtil>
SDCCHTrafficCarried
sdcchTraf Carr
Erl
<SDC
CH
TrafCarr>
SDCCHLoss Rate
sdcchLoss Rate
%
<0.1
100 * <SDC
CH
LossRate>
SDCCHBlocking
Rate
sdcchBlock Rate
%
<0.1
100 * <SDC
CH
BlockRate>
SDCCHEfficiency
sdcch Eff
%
>98
100 * <SDC
CH
Eff>
SDCCH
Number OfDefinedSDCCH
def Sdcch
Nr
ND
ESDC
CH
[2]
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Grade Of Service Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 129
5.1.4 Base Station Call Setup Analysis Report
Report Name: Base Station Call Setup Analysis Report
Report Short Name: BssCallSetupReport
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to detect GSM Cells with problems in the callsetup procedure and provide detailed information about reasons for call setupfailure.When analysing the indicators "Number of Call Setup Attempts", "Call SetupSuccess Rate", "Number Of Call Setup Failures" and "Percentage of CallSetup Failure Rate due to SSS Procedure Failure". Please note thatAuthentication, Identity, Ciphering and MSC failures are also counted inthese formulas although they are not related to the BSS. User Releasebefore assignment of a TCH is also included in "SSS Procedure Failure"formula. SMS Mobile Terminating (MTC – answer to paging) are also countedin "SSS Procedure Failure" formula due to the fact that the PAGINGRESPONSE is included in the Establishment INDICATION Message anddoes not allow any distinction between MTC and SMS Mobile Terminating.Thus, to conclude about the BSS performance in terms of Call SetupSuccess Rate, it is better to use the indicator "Call Setup Success Rate BSS"instead of "Call Setup Success Rate" because the first one don't takes intoaccount SSS procedure failures unless their were caused by SDCCH drops.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"SPBH Daily Peaks""DTOT""TEVL"
(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Measurements: From SCANBTS functional group:ATIMASCAATSDCMBSNACSUCPRNMSGDISQNRFLSDCCNSUCCHPCSINTHINTSUIMASCATACCBPROTASSATTTASSFAILTASSSUCC
From SCANBTSOHON functional group:SUINBHDO
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
130E200301-01-714-V10.0I-01
Layout:
QueuingFailures
CS F DistQue Fail
%
<1
100 * <CSFailQ
ueFail> // <C
SFail>
Assign.Failures
with otherReasons
CS F DistAss Fail
Other
%
100 * <CSFailAssFailO
ther> // <C
SFail>
Assign.Failuresby Msg.
CS FDist
Ass FailBy Msg
%
100 * <CSFailAssFailbyM
ess> / / <C
SFail>TCHLoss
CS FDistTchLoss
%
<1
100 * <CSFailTC
HLoss> /
/ <CSFail>
SSSProcedure
Failure
CS FDistSSS
Proc Fail
%
100 * <CSFailSSSProcFail> // <C
SFail>
SDCCHDrops
CS FDist
SdcchDrop
%100 * <C
SFailSDC
CH
Drop> /
/ <CSFail>
ImmediateAssign.
without MSSeizure
CS FDistImm
Ass NoSeiz
%
100 * <CSFailIm
mAssN
oSeiz> / / <C
SFail>
AGCHLoss
CS FDist
AgchLoss
%
100 * <CSFailAG
CH
Loss> // <C
SFail>
Percentage of Call Setup Failure Rate due to
ImmediateAssign.Losses
CS F DistImm Ass
Loss
%
100 * <CSFailIm
mAssLoss> /
/ <CSFail>
Numberof CallSetup
Failures
CS Fail
Nr
<CSFail>
Numberof Succ.
CallSetups
CS Suc
Nr
<CSSucc>
Numberof CallSetup
Attempts
CS Att
Nr
<CSAtt>
CallSetupSucc.RateBSS
CS SRBss
%
>95
100 * <CSSuccR
ateBSS>
CallSetup
SuccessRate
CS SR
%
100 * <CSSuccR
ate>
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Call Setup Analysis Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 131
5.1.5 Base Station Traffic F low Report
Report Name: Base Station Traffic Flow Report
Report Short Name: BssTraFlowReport
Target Groups: Network Optimisation; Network Planning.
Description: This report provides the number of calls and the number of intracell hand-overs between different cell areas (if extended or concentric cells), the num-ber of internal intercell handovers and the number of external intercell hand-overs. The following schema represents the information provided:
Target Cells connected to a different BSC
Target Cells connected to the same BSC
B C
D
EOrigin Cell (Observed Cell)
F G
Inner Area /Near Area
Complete Area /Far Area
A
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"TEVL""DTOT"
(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Measurements: From SCANBTS functional group:NSUCCHPCSINTHINTSINTHITASUCTCHSETASSSUCC
From SCANBTSOHON functional group:SUINBHDO
From SCANBTSIHO functional group:SININIRH
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
132E200301-01-714-V10.0I-01
Layout:
G
Intracell HOComp. to Inner Areaor Near to Far Area
itrHoCIOrNFSuc
Nr
SINTH
ITA[4] + SINTH
ITA[6]
F
Intracell HOInner to Comp. Areaor Far to Near Area
itrHoICOrFNSuc
Nr
SINTH
ITA[3] + SINTH
ITA[5]
E
Intercell Inter BSCOutgoing HO
extOutHoSuc
Nr
<InterBSCH
OSucc>
C
Intercell Intra BSCOutgoing HO
iteOutHoSuc
Nr
<InterCellH
OSucc>
B
Intercell Intra BSCIncoming HO
iteIncHoSuc
Nr
SININ
IRH
[all]
A
Call Setups
CSSucc
Nr
<CSSucc>
CT
Cell Type (0 - N
ormal; 1 - C
oncentric; 2 - Extended)
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Traffic Flow Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 133
5.1.6 Base Station Traffic Report
Report Name: Base Station Traffic Report
Report Short Name: BssTrafficReport
Target Groups: Network Planning; Network Optimisation
Description: The report provides the values for Configured TCH, Available TCH and TCHTraffic Carried, separate indicators distinguish between different channel ty-pes (i.e. TCH Full Rate and TCH Half Rate) and between channels dedicatedto different cell areas (i.e. inner area and complete area if concentric cell, or,single timeslot and double timeslot if extended cell). It also provides other loadindicators like blocking rate and traffic offered.The results are produced according to the “SPBH TC Peak“ criterion.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) BSC BSC Symbolic Name
Input Parameters:
(e) BTS Cell Symbolic Name
Measurements: From SCANBTS functional group:AALTCHTIATCHSMBSATTCHSEIMEBUSTCHNAVTCHNRDEFTCH
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0, but in thatcase, since NRDEFTCH counters are only available from BR6.0 on, the maxi-mum values for NAVTCH counters are used instead as approximation.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
134E200301-01-714-V10.0I-01
Layout:
Traffic’sThroughput forHR Inner Area
(SingleTimeslot)tch Traf
Carr H IS
Erl
TC_SPBH
(MEBU
STCH
[2])
Traffic’sThroughput forHR channels
tch TrafCarr H
Erl
TC_SPBH
(MEBU
STCH
[2,4])Traffic’s
Throughput forFR Complete
(DoubleTimeslot)
tch TrafCarr F CD
Erl
TC_SPBH
(MEBU
STCH
[3])
Traffic’sThroughput forFR Inner Area
(SingleTimeslot)tch TrafCarr F IS
Erl
TC_SPBH
(MEBU
STCH
[1])
TCH Traffic Carried
Traffic’sThroughput forFR channels
tch TrafCarr F
Erl
TC_SPBH
(MEBU
STCH
[1,3])
CompleteArea
(DoubleTimeslot)
tchAvail CD
Nr
TC_SPBH
(NAVTC
H[9,12])
InnerArea
(SingleTimeslot)
tchAvail IS
Nr
TC_SPBH
(NAVTC
H[3,6])
TCH Available
NormalCells
(Total)
tchAvail
Nr
TC_SPBH
(NAVTC
H[3,6,9,12])
HR
tchConsH
Nr
TC_SPBH
(NR
DEFTC
H[6,12])
FR
tchConsF
Nr
TC_SPBH
(NR
DEFTC
H[3,9])
TCH Consistency
NormalCells
(Total)
tchCons
Nr
TC_SPBH
(NR
DEFTC
H[3,9] + 0.5 *
* NR
DEFTC
H[6,12])
CT
Cell Type (0 - N
ormal; 1 - C
oncentric; 2 - Extended)
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Traffic ReportStart Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01135
Layout (cont):
Mean TimeCongestion
Rate(A_SPBH)
Mean TCongRate A_SPBH
%
A_SPBH(100 * <TC
HBlockR
ateDR
>)
TCHBlocking
Probability
tchBlock Prob
%
TC_SPBH
(100 * <TCH
BlockRateD
R>)
TCH Blockingprobability
usingErlangB
(A_SPBH)
tchErlB BlockProb A_SPBH
%
A_SPBH(100 * <TC
HErlBlockR
ateDR
>)
TCH Blockingprobability
usingErlangB
tchErlBBlock Prob
%
TC_SPBH
(100 * <TCH
ErlBlockRateD
R>)
TCHTrafficOffered
tchTrafOff
Erl
TC_SPBH
(<TCH
TrafOffD
R>)
Max Valueof traffics
peak(MAX_SPBH)
tchTrafCarr
Erl
MAX_SPBH
(MEBU
STCH
[1..4])
MeanPeak
(A_SPBH)
tchTrafCarr
Erl
A_SPBH(M
EBUSTC
H[1..4])
CompleteArea
(DoubleTimeslot)
tchTrafCarr CD
Erl
TC_SPBH
(MEBU
STCH
[3,4])
InnerArea
(SingleTimeslot)
tchTrafCarr IS
Erl
TC_SPBH
(MEBU
STCH
[1,2])
NormalCells
(Total)
tchTrafCarr
Erl
TC_SPBH
(MEBU
STCH
[1..4])
TCH Traffic Carried
Traffic’sThroughput forHR Complete
(DoubleTimeslot)
tchTrafCarr H CD
Erl
TC_SPBH
(MEBU
STCH
[4])
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Traffic ReportStart Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
136 E200301-01-714-V10.0I-01
5.1.7 Base Station Synthes is Report
Report Name: Base Station Synthesis Report
Report Short Name: BssSynthesisReport
Target Groups: Network Operation, Network Optimisation.
Description: This report aims to provide overview information about the load situation anddistribution for distinct cell areas, and basic protocol procedures of the GSMCells both for TCH and for SDCCH channels.The results are produced according to the “DTOT” criterion except for "TCHthroughput in the busy hour" related indicators for which “SPBH Max Peak”criterion is applied.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous days countingfrom today.
(b) START_DATE Any date(c) END_DATE Any date(d) BSC BSC Symbolic Name
Input Parameters:
(e) BTS Cell Symbolic Name
Measurements: From SCANBTSOHON functional group:ATINBHDONRUNINHDSUINBHDO
All scanners from SCANBTS functional group, with the following exceptions:AMRCHDISMBTCHAMRNAVTCHSDNDFTCHSDNNNOTNCHNTCHSDCMTASSATVSTASSUCVSTNMSCNCLTNSUDHSC
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0, but in thatcase, since NRDEFTCH counters are only available from BR6.0 on, the maxi-mum values for NAVTCH counters are used instead as approximation.
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01137
Layout:
ImmediateAssignmentwithout MSseizure rate
imm AssNo
Seiz Rate
%
>98
100 * <Imm
AssNoSeizR
ate>
AGCHLossRate
agchLossRate
%
100 * <AGC
HLossR
ate>SDCCHChannel
ActivationFailureRate
sdcch ChAct FR
%
100 * (<Imm
AssLoss> - ATSDC
MBS[1]) /
/ (<Imm
AssAtt> - ATSDC
MBS[1])
SDCCHLossRate
sdcchLossRate
%
<0.1
100 * <SDC
CH
LossRate>
SDCCHEfficiency
sdcch Eff
%
100 * <SDC
CH
Eff>
Inter cell +intra cell +inter BSC
outgoing HOsuccessful
rate
ho SR
%
100 * (<InterCellH
OSucc> + <InterBSC
HO
Succ>) // (<InterC
ellHO
Att> + <InterBSCH
OAtt>)
TCHdisconnection
rate onnormal
releasedcalls
call DR
%
100 * <CallD
ropRate>
SuccessfulAssignmentprobability
succ AssProb
%
100 * <SuccAssProb>
TCH noblocking
probabilityon
user side
tch NoBlock
%
100 * <TchNoBlock>
Successfulsignalling
proceduresrate
succ SigProc Rate
%
100 * <SuccSigProcRate>
SDCCH no
blockingprobability
sdcchNo Block
%
100 * <SDC
CH
NoBlock>
MobileNetworkAccess
probability
MNAP
%
>95
100 * <NetAccProb>
CT
Cell Type (0 - N
ormal; 1 - C
oncentric; 2 - Extended)
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Synthesis ReportStart Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
138E200301-01-714-V10.0I-01
Layout (cont):
CompleteArea orDouble
Timeslot
tchTrafCarrSpbhCD
Erl
SPBH(M
EBUSTC
H[3,4])
InnerArea orSingle
Timeslot
tchTrafCarrSpbhIS
Erl
SPBH(M
EBUSTC
H[1,2])
TCH throughput in the busy hour
NormalCells or
Total
tch TrafCarrSpbh
Erl
SPBH(M
EBUSTC
H[1..4])
CompleteArea orDouble
Timeslot
tch TrafCarr CD
Erl
MEBU
STCH
[3,4]
InnerArea orSingle
Timeslot
tch TrafCarr IS
Erl
MEBU
STCH
[1,2]
TCH Traffic Carried
NormalCells or
Total
tchTrafCarr
Erl
MEBU
STCH
[1..4]
TCHLossRate
tchLossRate
%
<1
100 * <TCH
LossRate>
CompleteArea orDouble
Timeslot
tchEff CD
%
100 * (NAVTC
H[9] + 0.5 * N
AVTCH
[12]) // (N
RD
EFTCH
[9] + 0.5 * NR
DEFTC
H[12])
InnerArea orSingle
Timeslot
tchEff IS
%
100 * (NAVTC
H[3] + 0.5 * N
AVTCH
[6]) // (N
RD
EFTCH
[3] + 0.5 * NR
DEFTC
H[6])
TCH efficiency
NormalCells or
Total
tchEff DR
%
100 * <TCH
EffDR
>
SDCCHDropRate
related toCall
Setups
sdcchDrop Rate
%
<0.1
100 * <SDC
CH
DropR
ate>
SDCCHTrafficCarried
sdcchTrafCarr
Erl
<SDC
CH
TrafCarr>
Immediateassignment
FailureProbability
imm AssFail Prob
%
100 * (<Imm
AssAtt> - <Imm
AssLoss> -- <Im
mAssSucc>) / (<Im
mAssAtt> - <Im
mAssLoss>)
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Synthesis ReportStart Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01139
Layout (cont):
Idlechannels
percent. ininterference
band 5
if BandRate 5
%
100 * <IfBandRate[5]>
Idlechannels
percent. ininterference
band 4
if BandRate 4
%
100 * <IfBandRate[4]>
Idlechannels
percent. ininterference
band 3
if BandRate 3
%
100 * <IfBandRate[3]>
Idlechannels
percent. ininterference
band 2
if BandRate 2
%
100 * <IfBandRate[2]>
Idlechannels
percent. ininterference
band 1
if BandRate 1
%
100 * <IfBandRate[1]>
ImperativeHo
percentage
impHO Perc
%
100 * <ImpO
utgHO
Rate>
Inter cell +intra + inter BSC
outgoing HOfailures with
loss ofconnection rate
ho DR
%
100 * (UN
IHIR
LC[1] + <InterBSC
HO
Drop>) /
/ (<InterCellH
OAtt> + <InterBSC
HO
Att>)
Inter cell +intra + inter BSC
outgoing HOfailures without
loss ofconnection rate
ho FR
%
100 * (<InterCellH
OFail> + <InterBSC
HO
Fail>) // (<InterC
ellHO
Att> + <InterBSCH
OAtt>)
TCH lossesdue to radiolink failureper hour of
conversation
tchDrop Erlh
Nr
<4
<TCH
DropErlh>
TCH radio linkfailures rate to
the totalnumber of
TCHconnection
tchDrop Rate
%
<2
100 * <TCH
DropR
ate>
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Synthesis ReportStart Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
140 E200301-01-714-V10.0I-01
5.1.8 Base Station Handover Overview Report
Report Name: Base Station Handover Overview Report
Report Short Name: BssHoOverviewReport
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to detect GSM Cells with problems in the Hand-over procedure. Separated Performance Indicators for each handover typeare presented (i.e. Intra Cell HO, Outgoing Internal HO, Outgoing ExternalHO, Outgoing SDCCH HO, Incoming Internal HO, Incoming External HO).It also allows to detect missing neighbourhood relationships by analysing theindicator "Inter Cell Handover indication Success Rate"
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"DTOT""TEVL"
(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Measurements: From SCANBTS functional group:AISHINTRAISHINTEAOINTESHATINHIACATINHIRCSINTHINTSINTHITASISHINTESISHINTRSOINTESH
From SCANBTSOHON functional group:ATINBHDOSUINBHDO
From SCANBTSIHO functional group:AININIRHSININIRH
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0, but in thatcase, SDCCH HO related indicators and the HO Indication Rejection Ratearen't available.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 141
Layout:
itr H
o SR
% >90 <IntraCellHOSuccRate>
Hand
over
itr H
o At
t
Nr <IntraCellHOAtt>
itr S
dcch
Ho
SR
% >70 <IntraCellSDHOSuccRate>
Numb
er of
Atte
mpts
and S
ucce
ss R
ate fo
r Intr
a Cell
SDCC
H Ha
ndov
er
itr S
dcch
Ho
Att
Nr AISHINTR[1]
Hand
over
Indic
ation
Rejec
tion R
ate
ho In
d Re
j Rat
e
% <5 100 * <HOIndRejRate>
Hand
over
Suc
cess
Rate
Rank
ing
ho S
R Ra
nk
% >90
(<IntraCellHOAtt> ** <IntraCellHOSuccRate> + <InterCellHOAtt> ** <InterCellHOSuccRate> + <InterBSCHOAtt> *
* <InterBSCHOSuccRate>) / ( <IntraCellHOAtt> ++ <InterBSCHOAtt> + <InterCellHOAtt>)
CT Cell Type (0 - Normal; 1 - Concentric; 2 - Extended)
Objec
t
<Cell Symbolic Name>
Tim
e
HH:mm
Base
Sta
tion
Hand
over
Ove
rview
Rep
ort <
AGGR
EGAT
ION>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
142E200301-01-714-V10.0I-01
Layout (cont):
extHo SR
%
>90
<InterBSCH
OSuccR
ate>
Outgoing Handover
extHo Att
Nr
<InterBSCH
OAtt>
ext SdcchHo SR
%
>50
<InterBSCSD
HO
SuccRate>
Number of Attempts and Success Rate for Inter Cell Inter BSC
SDCCH Handover
ext SdcchHo Att
Nr
AOIN
TESH[1]
iteHo SR
%
>90
<InterCellH
OSuccR
ate>
Outgoing Handover
iteHo Att
Nr
<InterCellH
OAtt>
ite IncHo SR
%
>90
<InterCellIncH
OSuccR
ate>
Incoming Handover
ite IncHo Att
Nr
AININ
IRH
[1..11]
ite SdcchHo SR
%
>70
<InterCellSD
HO
SuccRate>
Number of Attempts and Success Rate for Inter Cell Intra BSC
SDCCH Handover
ite SdcchHo Att
Nr
AISHIN
TE[1]
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station Handover Overview Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 143
5.1.9 Base Station Handover Analysis Report
Report Name: Base Station Handover Analysis Report
Report Short Name: BssHoReport
Target Groups: Network Optimisation.
Description: This report provides the number of HOs per cause and some important perfor-mance indicators to correlate with the HO information. This simple informationtable should be enough for an optimiser with reasonable background know-ledge to detect many problems affecting the network performance. For instan-ce, he will be able to identify cells which have: an unusual high number ofhandover attempts, cells with high number of quality handover attempts due tointerference problems, cells with a high number of dropped calls due to HOdrops, unbalanced links, etc.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous days countingfrom today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "DTOT"(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Measurements: From SCANBTS functional group:ATINHIACATINHIRCNRFLTCHSUCTCHSETASSFAILUNIHIRLCUNIHIALC
From SCANBTSOHON functional group:ATINBHDONRUNINHDSUINBHDO
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0. Please notethat the list of HO causes is shorter in BR5.5.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
144 E200301-01-714-V10.0I-01
Layout:
Sum
ite Sum Nr <InterCellHOAtt> + <InterBSCHOAtt>
FP ite FP Nr ATINHIRC[11]
FU ite FU Nr ATINHIRC[10] + ATINBHDO[10,21,32,..,351]
TRAF ite Traf Nr ATINHIRC[9] + ATINBHDO[9,20,31,..,350]
MF ite MF Nr ATINHIRC[8] + ATINBHDO[8,19,30,..,349]
DR ite DR Nr ATINHIRC[7] + ATINBHDO[7,18,29,..,348]
BC ite BC Nr ATINHIRC[6] + ATINBHDO[6,17,28,..,347]
DIST ite Dis
t
Nr ATINHIRC[5] + ATINBHDO[5,16,27,..,346]
DLS
ite DS Nr ATINHIRC[4] + ATINBHDO[4,15,26,..,345]
ULS
ite US Nr ATINHIRC[3]> + ATINBHDO[3,14,25,..,344]
DLQ
ite DQ Nr ATINHIRC[2] + ATINBHDO[2,13,24,..,343
Attem
pted I
nter C
ell H
ando
ver (
Intra
BSC
+ In
ter B
SC) p
er C
ause
ULQ
ite UQ Nr ATINHIRC[1] + ATINBHDO[1,12,23,..,342]
Sum itr Sum Nr <IntraCellHOAtt>
MF itr MF Nr ATINHIAC[7]
CTIA
orFT
FN itrC
I OrF
N
Nr ATINHIAC[4] + ATINHIAC[6]
ITCA
orNT
FA itrIC
OrN
F
Nr ATINHIAC[3] + ATINHIAC[5]
DLQ
itr DQ Nr ATINHIAC[2]
Attem
pted I
ntra C
ell H
ando
vers
per C
ause
ULQ
itr UQ Nr ATINHIAC[1]
Objec
t
<Cell Symbolic Name>
Tim
e
HH:mm
Base
Sta
tion
Hand
over
Ana
lysis
Repo
rtSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 145
Layout (cont):
TCH
Drop
Rate
tch
DR
% 100 * <TCHDrop> / SUCTCHSE[1,2]
HO D
rop R
ate
ho D
R
% 100 *<TCHDropHO>) / (ATINHIRC[1..11] ++ <IntraCellHOAtt> + <InterBSCHOAtt>)
Inter
Cell
HO D
rop R
ate
ite H
o D
R
% 100 * (UNIHIRLC[1] + <InterBSCHODrop>) // (<InterCellHOAtt> + <InterBSCHOAtt>)
Intra
Cell
HO D
rop R
ate
itr H
o D
R
% 100 * <IntraCellHODropRate>
Inter
Cell
HO
Drop
s
ite H
o D
rop
Nr UNIHIRLC[1] + <InterBSCHODrop>
Intra
Cell
HO
Drop
s
itr H
o D
rop
Nr <IntraCellHODrop>
TCH
Drop
s
tch
Dro
p
Nr <TCHDrop>
TCH
Conn
ectio
ns
tch
Con
n
Nr SUCTCHSE[1,2]
Objec
t
<Cell Symbolic Name>
Tim
e
HH:mm
Base
Sta
tion
Hand
over
Ana
lysis
Repo
rtSt
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
146 E200301-01-714-V10.0I-01
5.1.10 Base Station Outgoing Handover Report
Report Name: Base Station Outgoing Handover Report
Report Short Name: BssOutgoingHoReport
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to monitor the handover success rate betweenOrigin- and Target Cell.Furthermore, this report will help to identify Origin/Target cell pairs withunusual behaviour such as:− No handover attempts between neighbour cells;− High number of handover attempts indicating overlapping of cell coverage
areas with subsequent ping-pong handovers;− High number of handover attempts between two neighbours, but zero
successful handover;− High number of handover attempts between two neighbours, but low
handover success rate;− Target cells, for which it is in general difficult to make an handover into.The distribution between handover causes will also be analysed for each pair.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"DTOT""TEVL"
(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Measurements: From SCANBTSOHON functional group:ATINBHDONRUNINHDSUINBHDO
From SCANBTSOHOI functional group:AOUINIRHSOUINIRHUNINHOIE
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 147
Layout:
HO D
rop R
ate
ho D
R
% <3 100 * (<InterCellHODropRate> + <InterBSCHODropRate>)
HO S
ucce
ss R
ate
ho S
R
% >90 100 * (<InterCellHOSuccRate> + <InterBSCHOSuccRate>)
Delta
delta Nr (<InterCellHOAtt> + <InterBSCHOAtt>) -
- (<InterCellHOSucc> + <InterBSCHOSucc>)
Numb
er of
HO
Succ
ess
ho S
uc
Nr <InterCellHOSucc> + <InterBSCHOSucc>
Numb
er of
HO
Attem
pts
ho A
tt
Nr <5 <InterCellHOAtt> + <InterBSCHOAtt>
Case
Exte
rnal
Cell -
"0"
else i
f Inter
nal C
ell -
"1"
Inte
rnal
Nr If <InterCellHOAtt> > 0 Then "1"Else If <InterBSCHOAtt>> 0 Then "0"
Objec
t
<Origin Cell Symbolic Name>:<Target Cell Symbolic Name>
Tim
e
HH:mm
Base
Sta
tion
Outg
oing
Han
dove
r Rep
ort <
AGGR
EGAT
ION>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
148 E200301-01-714-V10.0I-01
Layout (cont):
Force
d due
toPr
eemp
tion
hoDi
stFP % 100 * (<InterCellHODist[11]> + <InterBSCHODist[10]>)
Fast
Uplin
k
hoDi
stFU % 100*(<InterCellHODist[10]> + <InterBSCHODist[9]>)
Traff
ic
hoDi
stTr
af
% 100 * (<InterCellHODist[9]>)
O&M
Force
d
hoDi
stMF % 100 * (<InterCellHODist[8]> + <InterBSCHODist[8]>)
Dire
cted
Retry ho
Dist
DR % 100 * (<InterCellHODist[7]> + <InterBSCHODist[7]>)
Bette
rCe
ll
hoDi
stBC % 100 * (<InterCellHODist[6]> + <InterBSCHODist[6]>)
Dista
nce
hoDi
stDi
st
% 100 * (<InterCellHODist[5]> + <InterBSCHODist[5]>)
DLSt
reng
th
hoDi
stDS % 100 * (<InterCellHODist[4]> + <InterBSCHODist[4]>)
ULSt
reng
th
hoDi
stUS % 100 * (<InterCellHODist[3]> + <InterBSCHODist[3]>)
DLQu
ality
hoDi
stDQ % 100 * (<InterCellHODist[2]> + <InterBSCHODist[2]>)
Hand
over
Dist
ributi
on
ULQu
ality
hoDi
stUQ % 100 * (<InterCellHODist[1]> + <InterBSCHODist[1]>)
Objec
t
<Origin Cell Symbolic Name>:<Target Cell Symbolic Name>
Tim
e
HH:mm
Base
Sta
tion
Outg
oing
Han
dove
r Rep
ort <
AGGR
EGAT
ION>
Star
t Date
: <ST
ART_
DATE
>En
d Date
: <EN
D_DA
TE>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 149
5.1.11 Unbalanced Links Report
Report Name: Unbalanced Links Report
Report Short Name: UnbLinksReport
Target Groups: Network Optimisation, Network Planning
Description: The purpose of this report is to detect GSM Cells with unbalanced linksbetween uplink and downlink direction and identify the level differencebetween them.Unbalanced links might result in degraded network performance.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "TEVL"
"DTOT"(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Measurements: From SCANBTS functional groupATINHIR
From SCANBTSOHON functional group:ATINBHDO
From SCANCHAN functional group:PWRUPDW
Remarks: Power Control must be deactivated in order to get correct values for RxLevmeasurements.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
150 E200301-01-714-V10.0I-01
Layout:
Unbalanced Links Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
HandoverBalance Rate
Mean RxLevel Uplink
Mean RxLevel Downlink
Rx LevelBalance Rate
HOBalance Rate
meanRxLv UL
meanRxLv DL
RxLvBalance Rate
Nr Nr Nr Nr
Date Time Object
0.8 < 1.2 0.8 < 1.2
YYYY
-MM
-DD
HH
:mm
<Cel
l Sym
bolic
Nam
e>
100
* (AT
INH
IRC
[1,3
] + A
TIN
BHD
O[(1
+ 9
* i),
(3 +
9 *
i)]) /
/ (AO
UIN
IRH
[(2 +
10
* i),
(4 +
10
* i)]
+ AT
INH
IRC
[2,4
])
<Mea
nRxL
vUL>
<Mea
nRxL
vDL>
<Mea
nRxL
vUL>
/ <M
eanR
xLvD
L>
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 151
5.1.12 Base Station GPRS Performance Report
Report Name: Base Station GPRS Performance Report
Report Short Name: BssGprsPerfReport
Target Groups: Network Optimisation, Network Planning, Marketing & Management.
Description: With this report, the performance of GPRS connections on GSM Cells isevaluated. It provides indicators that enable the identification of problemsrelated to channel capacity.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"SPBH Max Peak""SPBH TC Peak""TEVL"
(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Measurements: All scanners from SCANBTSGPRS functional group.
Remarks: It would be important to add to the report the number of statically allocatedPDCH.This report is also available in SPOTS V10 for BR5.5.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
152E200301-01-714-V10.0I-01
Layout:
DownLinkRetransmission
Rate
DLRetrRate
%
100 * <DLR
etransRate>
UpLinkRetransmission
Rate
ULRetrRate
%
100 * <ULR
etransRate>
Mean ThroughputDownLink per
Configured PDCH
meanThputDLPdch
kbps<M
eanThputDLPD
CH
>
Mean ThroughputUpLink per
Configured PDCH
meanThputULPdch
kbps
<MeanThputU
LPDC
H>
Mean DataDownLink
Throughputon Air Interface
meanDataDLUm
kbps
<MeanD
ataDLU
m>
Mean DataUpLink
Throughputon Air Interface
meanDataULUm
kbps
<MeanD
ataULU
m>
Packet AccessRejections dueto Congestion
pAccRejCon
Nr
<PAccRejC
on>
Mean Numberof PDCH
DynamicallyConfigured
meanPdchConf
Nr
<MeanPD
CH
Conf>
CT
Cell Type (0 - N
ormal; 1 - C
oncentric; 2 - Extended)
Object
<Cell Sym
bolic Nam
e>
Time
HH
:mm
Base Station GPRS Performance Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 153
5.1.13 Base Station Interference Band Report
Report Name: Base Station Interference Band Report
Report Short Name: BssInterfBandReport
Target Groups: Network Optimisation
Description: This report provides the percentage of idle TCH in each interference band cal-culated from the total number of idle TCHs (it uses the Interference Band Rateon Idle TCH key performance indicator). The results are produced per cell.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"DTOT""TEVL"
(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Measurements: From SCANBTS functional group:MEITCHIB
Remarks: This report is also available in SPOTS V10 for BR5.5 and BR5.0.
Layout:
Base Station Interference Band Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Interference Band Rate on Idle TCH
Band 1 Band 2 Band 3 Band 4 Band 5
ifBandRate1 ifBandRate2 ifBandRate3 ifBandRate4 ifBandRate5
% % % % %
Date Time Object
YYYY
-MM
-DD
HH
:mm
<Cel
l Sym
bolic
Nam
e>
100
* <IfB
andR
ate[
1]>
100
* <IfB
andR
ate[
2]>
100
* <IfB
andR
ate[
3]>
100
* <IfB
andR
ate[
4]>
100
* <IfB
andR
ate[
5]>
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
154 E200301-01-714-V10.0I-01
5.1.14 TRX Level And Qualit y Report
Report Name: TRX Level and Quality Report
Report Short Name: TrxLevQualReport
Target Groups: Network Planning; Network Optimisation
Description: The report provides the mean RXLEV and RXQUAL on busy TCH. Both foruplink and downlink.It also provides the Level Band for which N% (with Ndefined by ) of themeasurements on busy channels registered a RXLEV in a lower Level Band.This information is directly related with the coverage probability because it canbe stated that 90% coverage probability was achieved (usual goal of networkplanning) if the result Level Band was found greater or equal to the Level Bandwhich includes the defined minimum acceptable RXLEV.Furthermore, the report also provides the Quality Band for which 90% of themeasurements on busy channels registered a RXQUAL in a lower Quality Band.Two indicators distinguish between uplink and downlink.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"DTOT""TEVL"
(e) BSC BSC Symbolic Name(f) BTS Cell Symbolic Name(g) N_PERCENTILE_LV_DL Default = 10 %(h) N_PERCENTILE_LV_UL Default = 10 %(i) N_PERCENTILE_QU_DL Default = 90 %
Input Parameters:
(j) N_PERCENTILE_QU_UL Default = 90 %
Measurements: From SCANCHAN functional group:PWRUPDW
Remarks: None.
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01155
Layout:
Downlink
RxLevN Perc DL
Nr
>8
<RxLvN
PercentileDL>
RXLEV for N% Percentileon Busy TCH
Uplink
RxLevN Perc UL
Nr
>8
<RxLvN
PercentileUL>
Downlink
meanRxLv DL
Nr
<MeanR
xLvDL>
Mean RXLEV on Busy TCH
Uplink
meanRxLv UL
Nr
<MeanR
xLvUL>
Downlink
RxQual NPerc DL
Nr
<RxQ
uNPercentileD
L>
RXQUAL for N% Percentileon Busy TCH
Uplink
RxQual NPerc UL
Nr
<RxQ
uNPercentileU
L>
Downlink
mean RxQu DL
Nr
<MeanR
xQuD
L>
Mean RXQUAL on Busy TCH
Uplink
mean RxQu UL
Nr
<MeanR
xQuU
L>
Object
<Cell Sym
bolic>:<TRX Id>
Time
HH
:mm
TRX Level And Quality Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
156 E200301-01-714-V10.0I-01
5.1.15 Base Station Link Quality Report
Report Name: Base Station Link Quality Report
Report Short Name: BssLinkQualReport
Target Groups: Network Optimisation
Description: This report provides performance indicators that enable the detection ofinterference and subsequent bad call quality. Those indicators are:• "TCH Traffic Carried"
Hot spots (i.e. areas recording high traffic values) are naturally moreaffected by interference.
• "Intra Cell Quality Handover Attempts per Erlanghour"The amount of handovers due to quality for the same traffic volume isproportional to the amount of interference affecting that cell's channels.Thus, it is a good indicator to compare cells in terms of interference if theyare configured with equal thresholds for intra cell quality handover.
• "Intra Cell Handover Drops per Erlanghour"High values indicate that either the handover C/I threshold is set to low,or, the interference is seriously affecting that cell causing an abnormalincrease of intracell handover attempts. Moreover, no available betterchannel exist within that cell due to traffic overload or spreadoutinterference, and, in resume, the intracell handover feature is not solvingall interference problems.
• "Mean FER"High values for the Frame Erasure Rate result in bad speech quality, so, itis possible to compare the average speech quality between different cellsusing this indicator. Furthermore, knowing that it's mainly affected by cell'sperformance in terms of interference and coverage, the average FER isalso useful to detect interference and coverage related problems.
• "Quality Link for 2% FER"It's the amount of measurements that registered Frame Erasure Rateslower than 2% expressed in a percentage. This value should assumevalues greater than 90% and it gives an approximate number for theactual percentage of subscribers receiving a good speech quality.
• "High RXLEV Low RXQUAL Rate"This indicator provides the percentage of mobile reports that registered areceived bad quality and, simultaneously, a received high signal level.This combination happens as result of interference, thus, it is a reliableindicator to measure interference.
The evaluation of all these indicators in one single tabular report can give aclear picture for the localisation of interference related problems.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"DTOT""TEVL"
(e) BSC BSC Symbolic Name
Input Parameters:
(f) BTS Cell Symbolic Name
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 157
Measurements: From SCANBTS functional group:ATINHIACMEBUSTCHUNIHIALC
From SCANTRX functional group:CFERRXQUCRXLVQUU
Remarks: SCANTRX measurements can't both be collected simultaneously; so, therespective columns should present daily values.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
158E200301-01-714-V10.0I-01
Layout:
Downlink
high Lv LowQu Rate DL
%
100 * <HighLvLow
QuR
ateDL>
High RXLEV Low RXQUAL Rate
Uplink
high Lv LowQu Rate UL
%
100 * <HighLvLow
QuR
ateUL>
Quality Link for2% FER
quality Link2Fer
%
100 * <QualityLink2FER
>
Mean FERUplink
mean Fer UL
Nr
<MeanFER
UL>
Intra CellHandover Dropsper Erlanghour
itr HoDrop Erlh
Nr
UN
IHIALC
[1] // (T / 3600 * <TC
HTrafC
arrDR
>)
Downlink
itr Ho DQAtt Erlh
Nr
ATINH
IAC[2] /
/ (T / 3600 * <TCH
TrafCarrD
R>)
Intra Cell Quality HandoverAttempts per Erlanghour
Uplink
itr Ho UQAtt Erlh
Nr
ATINH
IAC[1] /
/ (T / 3600 * <TCH
TrafCarrD
R>)
TCH TrafficCarried
tch Traf Carr
Erl
<TCH
TrafCarrD
R>
Object
<Cell Sym
bolic>:<TRX Id>
Time
HH
:mm
Base Station Link Quality Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 159
5.1.16 Correlated Data Histogram Reports
Report Name: (a) Correlated Rx Level to Rx Quality on Uplink(b) Correlated Rx Level to Rx Quality on Downlink(c) Correlated Rx Level to Timing Advance on Uplink(d) Correlated Rx Level to Timing Advance on Downlink(e) Correlated FER to Rx Qualilty on Uplink
Report Short Name: (a) CorrRxLevRxQualUL(b) CorrRxLevRxQualDL(c) CorrRxLevTAUL(d) CorrRxLevTADL(e) CorrFERRxQualUL
Target Groups: Network Optimisation.
Description: Certain BR6.0 measurements (namely CRXLVQUU, CRXLVQUD,CRXLVTAU, CRXLVTAD and CFERRXQU) require a specific type of reportlayout to enable a graphical, user-friendly, use-case oriented, presentation ofthe provided histograms.All these reports have exactly the same structure which corresponds to an8x8 matrix with the following results:(a) CorrRxLevRxQualUL report provides all 64 counters from CRXLVQUU(b) CorrRxLevRxQualDL report provides all 64 counters from CRXLVQUD(c) CorrRxLevTAUL report provides all 64 counters from CRXLVTAU(d) CorrRxLevTADL report provides all 64 counters from CRXLVTAD(e) CorrFERRxQualUL report provides all 64 counters from CFERRXQUThe final goal for these reports is to present the previous information as 3Dgraphics where, in the current implementation, the "zz" axis corresponds to agrey scale for the total number of times a certain (x, y) combination pairoccurred during the evaluation period.
There are three possible combinations of labels for the "xx" and "yy" axis:• Case one of "Rx Level to Rx Quality" reports is being visualised, rows
correspond to 8 RxLev ranges ("xx" axis) and columns correspond to 8RxQual ranges ("yy xx" axis).
• Case one of "Rx Level to Timing Advance" reports is being visualised,rows correspond to 8 RxLev ranges ("xx" axis) and columns correspond to8 TA ranges ("yy" axis).
• Case "FER to Rx Quality" report is the one being visualised, rowscorrespond to 8 FER ranges ("xx" axis) and columns correspond to 8RxQual ranges ("yy" axis).
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "Total"
"Total DTL""Total SPBH"
(e) BSC BSC Symbolic Name(f) BTS Cell Symbolic Name
Input Parameters:
(g) TRX TRX Id
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
160 E200301-01-714-V10.0I-01
Measurements: From SCANTRX functional group:CFERRXQUCRXLVQUDCRXLVQUUCRXLVTAUCRXLVTAD
Remarks: SCANTRX measurements can't be collected simultaneously.
Layout:
Example for the "Correlated Rx Level to Rx Quality on Uplink" report selecting AGGREGATION crite-ria equal to "Total DTL":
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 161
5.2 UTRAN
5.2.1 UTRAN Overview Report
Report Name: UTRAN Overview Report
Report Short Name: Utran_Overview
Target Groups: Network Operation, Network Optimisation, Network Management.
Description: This report provides information like Call Setup Success Rates, Number ofCall Attempts and Mean Call Duration per QoS class. Or like general qualityindicators for Hard and Soft Handovers and, moreover the connection droprate.The report results can be provided on a per cell or per RNC basis.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"DTOT""TEVL"
(e) RNC RNC Symbolic Name(f) UCELL Utran Cell ID
Input Parameters:
(g) RNC_TOTALS """RNC Totals"
The results will be pre-sented per RNC case"RNC Totals" report ischosen.
Measurements: From RNC:hhoAllOutAtthhoAllOutFailhhoAllOutSucciuRelCmdiuRelReqrabEstabAttrabEstabFailrabEstabSuccrabPerQosClassrabRelrrcEstabAttrrcEstabSuccshoAddIntraNodeBAttshoAddIntraNodeBSuccshoAddInterRncAttshoAddInterRncSuccshoAddIntraRncAtt shoAddIntraRncAttshoAddIntraRncSucc shoAddIntraRncSuccuesPerActiveLinkSetSizeprlcUsage (only if user chooses the RNC Totals report variant)
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
162 E200301-01-714-V10.0I-01
Layout:
MHT
Back
g
sec T * rabsPerQosClass[BG][All] /
/ rabEstabSucc[BG][All]
CS S
RBa
ckg
% >95 100 * (rrcEstabSucc[3,8]/ rrcEstabAtt[3,8]) *
* (rabEstabSucc[BG][All] / rabEstabAtt[BG][All])
Back
grou
nd
CS A
ttBa
ckg
Nr rrcEstabAtt[3,8]
MHT
Inte
r
sec T * rabsPerQosClass[IN][All] /
/ rabEstabSucc[IN][All]CS
SR
Inte
r
% >50 100 * (rrcEstabSucc[2,7]/ rrcEstabAtt[2,7]) *
* (rabEstabSucc[IN][All] / rabEstabAtt[IN][All])
Inter
activ
e
CS A
ttIn
ter
Nr rrcEstabAtt[2,7]
MHT
Stre
am
sec T * rabsPerQosClass[ST][All] /
/ rabEstabSucc[ST][All]
CS S
RSt
ream % >50 100 * (rrcEstabSucc[1,6]/ rrcEstabAtt[1,6]) *
* (rabEstabSucc[ST][All] / rabEstabAtt[ST][All])
Stre
aming
CS A
ttSt
ream Nr rrcEstabAtt[1,6]
MHT
Conv
sec T * rabsPerQosClass[CV][All] /
/ rabEstabSucc[CV][All]
CS S
RCo
nv % >95 100 * (rrcEstabSucc[0,5]/ rrcEstabAtt[0,5]) *
* (rabEstabSucc[CV][All] / rabEstabAtt[CV][All])
RRC
Attem
pts, A
cces
s Pro
babil
ity an
d Mea
n Hold
ing T
ime p
er Q
oS
Conv
ersa
tiona
l
CS A
ttCo
nv Nr rrcEstabAtt[0,5]
CSSR
Acce
ssPr
obab
ility
CS S
R
% >80 <CSSRAccProb>
Call
Setup
s
CS Nr rabEstabASucc[All]
Objec
t
<Utran Cell Id>
Tim
e
HH:mm
UTRA
N Ov
ervie
w Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01163
Layout (cont):
Inter-RATHO QualityIndicator
I-RAT HO QI
%
<ISHO
QI>
Hard HOQuality
Indicator
HHO QI
%
<HH
OQ
I>
Soft HO RateRLN=1
SHO Rate 1
%
<SHO
Rate_1>
Branch AdditionQuality Indicator
branch Add QI
%
<BranchAddQI>
USSR Multi-RAB
USSR Multi RAB
%
<USSR
MultiR
AB>
USSR AccessProbability
USSR Acc Prob
%
<USSR
AccProb>
AbnormalConnection
Release Rate
un Normal Con RR
%
<UnN
ormalC
RR
>
con DR
%
<ConD
R>
Connection DropRate and Number
con D
Nr
<ConD
>
Object
<Utran C
ell Id>
Time
HH
:mm
UTRAN Overview Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
164 E200301-01-714-V10.0I-01
5.2.2 Connection Drop per Cause Report
Report Name: Connection Drop per Cause Report
Report Short Name: ConnectionDropPerCause
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to provide the list of reasons for connectiondrops. The report should be presented as pie chart - one per cell or per RNC– to enable the analysis of the relative weight of each cause. Please note thatthe actual percentage value for each cause is displayed in SPOTS interface.Additionally, to simplify the chart analysis by removing unnecessary informa-tion, all causes with zero occurrences are filtered on the report.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"Total""TEVL"
(e) RNC RNC Symbolic Name
Input Parameters:
(f) UCELL Utran Cell ID
Measurements: From RNC:iuRelReq
Remarks: None.
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01165
Layout:UTRAN Connection Drop per Cause Report <AGGREGATION>
Start Date: <START_DATE>End Date: <END_DATE>
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
166 E200301-01-714-V10.0I-01
5.2.3 RRC Analysis Report
Report Name: RRC Analysis Report
Report Short Name: RRCAnalysisReport
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to provide RRC related information in a per cellbasis.The information concerns the number of RRC connection establishmentattempts, respective success rate and failure rates per cause. Besides it alsodetails the number and the reasons for RRC drop.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"DTOT""TEVL"
(e) RNC RNC Symbolic Name
Input Parameters:
(f) UCELL Utran Cell ID
Measurements: From RNC:rrcEstabAttrrcEstabFailrrcEstabSuccrrcRelCcchrrcRelDcch
Remarks: None.
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01167
Layout:
RRC EstablishmentFailures
est Fails
Nr
rrcEstabFail[all]
RRC EstablishmentSuccess Rate MO
est SR MO
%
<RrcEstabSR
Mo>
RRC EstablishmentAttempts MO
est Att MO
Nr
rrcEstabAtt[0..4,9]
RRC EstablishmentSuccess Rate MT
est SR MT
%
<RrcEstabSR
Mt>
RRCEstablishmentAttempts MT
est Att MT
Nr
rrcEstabAtt[5..8]
RRCEstablishmentSuccess Rate
est SR
%
>90
<RrcEstabSR>
RRCEstablishment
Attempts
est Att
Nr
rrcEstabAtt[all]
Object
<Utran C
ell Id>
Time
HH
:mm
RRC Analysis Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
168E200301-01-714-V10.0I-01
Layout (cont):
Other
DR Other
%
<RR
CD
R_O
ther>
Re-establishmentReject
DR Re-est Rej
%
<RR
CD
R_3_0_4>
Congestion
DR Cong
%
<RR
CD
R_3_0_3>
Pre-emptiveRelease
DR Pre-emp Rel
%<R
RC
DR
_3_0_2>
RRC Drop Rate per Drop Cause
Unspecified
DR Unspec
%
<RR
CD
R_3_0_1>
RRCDrops
Drops
Nr
rrcRelD
ccH[1..4, O
ther] ++ rrcR
elCcch[1..4, O
ther]
Other
est FR Other
%
<RrcEstabFR
_Other>
No Reply fromthe UE
est FR No Reply
%
<RrcEstabFR
_NoR
eply>
Unspecified
est FR Unspec
%
<RrcEstabFR
_3_0_1>
RRC Establishment Failure per Failure Cause
Congestion
est FR Cong
%
<RrcEstabFR
_3_0_0>
Object
<Utran C
ell Id>
Time
HH
:mm
RRC Analysis Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 169
5.2.4 RRC Establishment per Cause Report
Report Name: RRC Establishment per Cause Report
Report Short Name: RRCEstablishmentPerCause
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to provide the list of reasons for the Call Esta-blishment Procedure. The report should be presented as pie chart (one percell or per RNC) to enable the analysis of the relative weight of each cause.Please note that the actual percentage value for each cause is displayed inSPOTS interface. Additionally, to simplify the chart analysis by removingunnecessary information, all causes with zero occurrences are filtered on thereport.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"Total""TEVL"
(e) RNC RNC Symbolic Name
Input Parameters:
(f) UCELL Utran Cell Id
Measurements: From RNC:rrcEstabAtt
Remarks: None.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
170E200301-01-714-V10.0I-01
Layout:RRC Establishment per Cause Report <AGGREGATION>
Start Date: <START_DATE>End Date: <END_DATE>
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 171
5.2.5 RAB Analysis Report
Report Name: RAB Analysis Report
Report Short Name: RABAnalysisReport
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to provide for each cell the number of RAB esta-blishment attempts, success rate, failure rate, drop rate, RAB release causes,etc. Separation is done between QoS classes, Packet Switched and CircuitSwitched traffic to obtain different RAB establishment success rates.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"DTOT""TEVL"
(e) RNC RNC Symbolic Name
Input Parameters:
(f) UCELL Utran Cell Id
Measurements: From RNC:iuRelCmdiuRelReqrabEstabAttrabEstabFailrabEstabSuccrabRel
Remarks: None.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
172 E200301-01-714-V10.0I-01
Layout:
est S
RBa
ckg
% 100 * rabEstabSucc[BG][all] / rabEstabAtt[BG][all]
Back
grou
nd
est A
ttBa
ckg
Nr rabEstabAtt[BG][all]
est S
RIn
ter
% 100 * rabEstabSucc[IN][all] / rabEstabAtt[IN][all]Int
erac
tive
est A
ttIn
ter
Nr rabEstabAtt[IN][all]es
t SR
Stre
am % 100 * rabEstabSucc[ST][all] / rabEstabAtt[ST][all]
Stre
aming
est A
ttSt
ream Nr rabEstabAtt[ST][all]
est S
RCo
nv % 100 * rabEstabSucc[CV][all] / rabEstabAtt[CV][all]
Conv
ersa
tiona
l
est A
ttCo
nv Nr rabEstabAtt[CV][all]
est
SR P
S
% <RabEstabSRPs>
PS
est
Att P
S
Nr rabEstabAtt[PS][all]
est
SR C
S
% <RabEstabSRCs>
CS
est
Att C
S
Nr rabEstabAtt[CS][all]
est S
R
% >90 <RabEstabSR>
RAB
Estab
lishm
ent A
ttemp
ts an
d Suc
cess
Rate
s
Total
est A
tt
Nr rabEstabAtt[all]
Objec
t
<Utran Cell Id>
Tim
e
HH:mm
RAB
Analy
sis R
epor
t <AG
GREG
ATIO
N>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01173
Layout (cont):
ConnectionDrop Rate
conn DR
%
<ConD
R>
Other
abnRR Other
Nr
100 * rabRel[all][O
ther] / rabEstabSucc[all]
UnspecifiedFailure
abn RRUnspec Fail
Nr
100 * rabRel[all][115] / rabEstabSucc[all]
O&MIntervention
abn RRO&M Interv
Nr100 * rabR
el[all][113] / rabEstabSucc[all]
RepeatedIntegrity
Checking Fail
abn RRInteg Ck Fail
Nr
100 * rabRel[all][37] / rabEstabSucc[all]
Iu UPFailure
abn RRIu UP Fail
Nr
100 * rabRel[all][28] / rabEstabSucc[all]
Abnormal RAB Release Rate Per Cause
UTRANReason
abn RRUtran Reas
Nr
100 * rabRel[all][15] / rabEstabSucc[all]
RABReleaseRequests
RAB Rel Req
Nr
rabRel[all]
Failure Rate
est FR
%
<RabEstabFR
>
RAB Establishment Failure
Failures
est Fail
Nr
rabEstabFail[all]
Object
<Utran C
ell Id>
Time
HH
:mm
RAB Analysis Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
174 E200301-01-714-V10.0I-01
5.2.6 RAB Failure per Cause Report
Report Name: RAB Failure per Cause Report
Report Short Name: RABFailurePerCause
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to provide the list of reasons for RAB failure.The report should be presented as pie chart (one per cell or per RNC) toenable the analysis of the relative weight of each cause.Please note that the actual percentage value for each cause is displayed inSPOTS interface. Additionally, to simplify the chart analysis by removingunnecessary information, all causes with zero occurrences are filtered on thereport.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"Total""TEVL"
(e) RNC RNC Symbolic Name
Input Parameters:
(f) UCELL Utran Cell Id
Measurements: From RNC:rabEstabFail
Remarks: None.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 175
Layout:RA
B Fa
ilure
per
Cau
se R
epor
t <AG
GREG
ATIO
N>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
176 E200301-01-714-V10.0I-01
5.2.7 Soft HO Analysis Report
Report Name: Soft HO Analysis Report
Report Short Name: SoftHOAnalysis
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to provide the number and success rates eitherfor intra NodeB intra RNC and inter RNC branch additions. It also providesthe distribution between handover causes and the percentage of connectionsthat use 1, 2 or 3 radio links.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"DTOT""TEVL"
(e) RNC RNC Symbolic Name
Input Parameters:
(f) UCELL Utran Cell Id
Measurements: From RNC:rabEstabSuccshoAddInterRncAttshoAddInterRncSuccshoAddIntraNodeBAttshoAddIntraNodeBSuccshoAddIntraRncAttshoAddIntraRncSuccuesPerActiveLinkSetSize
Remarks: None.
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens SA
E200301-01-714-V10.0I-01177
Layout:
Branch AdditionSuccess Rate
Inter RNC SR
%
<BranchAddSRInterR
NC
>
Inter RNC Soft Handovers
Branch AdditionAttempts
Inter Rnc Att
Nr
shoAddIntraRncAtt[all]
Branch AdditionSuccess Rate
Intra Rnc SR
%<BranchAddSR
IntraRN
C>
Intra RNC Soft Handovers
Branch AdditionSuccess Rate
Intra Rnc Att
Nr
shoAddIntraRncAtt[all]
Branch AdditionSuccess Rate
Intra NB SR
%
<BranchAddSRIntraN
odeB>
Intra NodeB Soft Handovers
Branch AdditionAttempts
Intra NB Att
Nr
shoAddIntraNodeBAtt[all]
Branch AdditionSuccess Rate
Branch Add SR
%
<BranchAddSR>
Object
<Utran C
ell Id>
Time
HH
:mm
Soft HO Analysis Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
178 E200301-01-714-V10.0I-01
Layout (cont):
RLN
=3
SHO
Rate
3
% <SHORate_3>
RLN
=2
SHO
Rate
2
% <SHORate_2>
Soft H
O Ra
te pe
r RLN
RLN
=1
SHO
Rate
1
% <SHORate_1>
Othe
r Per
c
%
100 * (shoAddIntraNodeBAtt[Other] + shoAddIntraRncAtt[Other] ++ shoAddIntraRncAtt[Other]) / (shoAddIntraNodeBAtt[all] +
+ shoAddIntraRncAtt[all] + shoAddIntraRncAtt[all])
Othe
r Cau
ses
Othe
r
Nr shoAddIntraNodeBAtt[Other] + shoAddIntraRncAtt[Other] ++ shoAddIntraRncAtt[Other]
CPIC
H - 1
CPe
rc %
100 * (shoAddIntraNodeBAtt[4] + shoAddIntraRncAtt[4] ++ shoAddIntraRncAtt[4]) / (shoAddIntraNodeBAtt[all] +
+ shoAddIntraRncAtt[all] + shoAddIntraRncAtt[all])
CPIC
H Co
mpar
ison
(1C)
CPIC
H - 1
C
Nr shoAddIntraNodeBAtt[4] + shoAddIntraRncAtt[4] ++ shoAddIntraRncAtt[4]
CPIC
H - 1
A'Pe
rc %
100 * (shoAddIntraNodeBAtt[2] + shoAddIntraRncAtt[2] ++ shoAddIntraRncAtt[2]) / (shoAddIntraNodeBAtt[all] +
+ shoAddIntraRncAtt[all] + shoAddIntraRncAtt[all])
CPIC
H Co
mpar
ison
(1A'
)
CPIC
H - 1
A'
Nr shoAddIntraNodeBAtt[2] + shoAddIntraRncAtt[2] ++ shoAddIntraRncAtt[2]
CPIC
H - 1
APe
rc %
100 * (shoAddIntraNodeBAtt[1] + shoAddIntraRncAtt[1] ++ shoAddIntraRncAtt[1]) / (shoAddIntraNodeBAtt[all] +
+ shoAddIntraRncAtt[all] + shoAddIntraRncAtt[all])
SHO
Per C
ause
- Nu
mber
and D
istrib
ution
CPIC
H Co
mpar
ison
(1A)
CPIC
H - 1
A
Nr shoAddIntraNodeBAtt[1] + shoAddIntraRncAtt[1] ++ shoAddIntraRncAtt[1]
Objec
t
<Utran Cell Id>
Tim
e
HH:mm
Soft
HO A
nalys
is Re
port
<AGG
REGA
TION
>St
art D
ate: <
STAR
T_DA
TE>
End D
ate: <
END_
DATE
>
Date YYYY-MM-DD
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 179
5.2.8 Branch Addition Failure per Cause Report
Report Name: Branch Addition Failure per Cause Report
Report Short Name: BranchAdditionFailPerCause
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of this report is to provide the list of reasons for the BranchAddition Procedure. The report should be presented as pie chart (one per cellor per RNC) to enable the analysis of the relative weight of each causePlease note that the actual percentage value for each cause is displayed inSPOTS interface. Additionally, to simplify the chart analysis by removingunnecessary information, all causes with zero occurrences are filtered on thereport.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Max Peak"
"Total""TEVL"
(e) RNC RNC Symbolic Name
Input Parameters:
(f) UCELL Utran Cell Id
Measurements: From RNC:shoAddInterRncFailshoAddIntraNodeBFailshoAddIntraRncFail
Remarks: None.
180E200301-01-714-V10.0I-01
Layout:Branch Addition Failure per Cause Report <AGGREGATION>
Start Date: <START_DATE>End Date: <END_DATE>
S
iemens SASiemens Perform
ance Reports (SPO
TS V10 Drop 4)
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 181
5.2.9 Hard HO Analysis Report
Report Name: Hard HO Analysis Report
Report Short Name: HardHOAnalysis
Target Groups: Network Operation, Network Optimisation.
Description: The purpose of the report is to provide numbers and success rates foroutgoing Hard Handovers, additionally that same information is also providedon a per cause basis. Other key performance indicators like the number ofoutgoing hard handover per call and the number of inter radio accesstechnology (I-RAT) handovers per call, are also provided within this report.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” means the 7previous complete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) AGGREGATION "SPBH Daily Peaks"
"DTOT""TEVL"
(e) RNC RNC Symbolic Name
Input Parameters:
(f) UCELL Utran Cell Id
Measurements: From RNC:hhoAllOutAtthhoAllOutFailhhoAllOutSuccrabEstabSucc
Remarks: None.
Siemens SA
Siemens Perform
ance Reports (SPO
TS V10 Drop 4)
182E200301-01-714-V10.0I-01
Layout:
HHO OtherPerc
%
100 * hhoAllOutAtt[1][O
ther] / hhoAllOutAtt[1][all]
Other Cause
HHO AttOther
Nr
hhoAllOutAtt[1][O
ther]
HHO RadioReason Perc
%100 * hhoAllO
utAtt[1][43] / hhoAllOutAtt[1][all]
Relocation Desirable for Radio Reasons
HHO AttRadio Reason
Nr
hhoAllOutAtt[1][43]
HHO LoadCtrl Perc
%
100 * hhoAllOutAtt[1][0] / hhoAllO
utAtt[1][all]
Outgoing HHO Per Cause - Number and Distribution
Load Control
HHO AttLoad Ctrl
Nr
hhoAllOutAtt[1][0]
Drop Rate
HHO DR
%
<HH
OD
RIntraN
B>
Failure Rate
HHO FR
%
<HH
OFR
IntraNB>
Success Rate
HHO SR
%
<HH
OSR
IntraNB>
Outgoing Hard Handovers
Attempts
HHO Att
Nr
hhoAllOutAtt[1][all]
Object
<Utran C
ell Id>
Time
HH
:mm
Hard HO Analysis Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
E200301-01-714-V10.0I-01183
Layout (cont):
OutgoingHHO
per Call
HHOper Call
Nr
<HH
OperC
allRateN
odeB>
Outgoing CSInter-RATper Call
CS I-RATHO per Call
Nr
<ISHO
perCallR
ate>
CS I-RAT HOOther Perc
%100 * hhoAllO
utAtt[5][Other] / hhoAllO
utAtt[5][all]
Other Causes
CS I-RATHO Att Other
Nr
hhoAllOutAtt[5][O
ther]
CS I-RAT HORadioReasonPerc
%
100 * hhoAllOutAtt[5][43] / hhoAllO
utAtt[5][all]
Outgoing CS Inter-RAT HO Per Cause - Number and Distribution
Relocation Desirable For Radio Reasons
CS I-RAT HOAttRadioReason
Nr
hhoAllHoO
utAtt[43]
Drop Rate
CS I-RATHO DR
%
<ISHO
OutC
SDR
pCell>
Failure Rate
CS I-RATHO FR
%
<ISHO
OutC
SFRpC
ell>
Success Rate
CS I-RATHO SR
%
<ISHO
OutC
SSRpC
ell>
Outgoing CS Inter-RAT Handovers
Attempts
CS I-RATHO Att
Nr
hhoAllOutAtt[5][all]
Object
<Utran C
ell Id>
Time
HH
:mm
Hard HO Analysis Report <AGGREGATION>Start Date: <START_DATE>
End Date: <END_DATE>
Date
YYYY-MM
-DD
Sie
mens Performance Reports (SPO
TS V10 Drop 4)
Siemens SA
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
184 E200301-01-714-V10.0I-01
6 Real-Time Reports
SPOTS enables the visualisation of the performance indicators that are being collected and evaluatedagainst thresholds in real-time, with two special report layouts:
• Bar-Chart report
• Monitoring Panel report
These layouts are Real-Time module specific features and are not available in a Long-Term SPOTSinstallation.
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 185
6.1 Bar-Chart Reports Visualization
This type of reports aims to give a correlation between values of the "MonitoredCounter" and otherindicators that might help troubleshooting causes for abnormal values.
The abnormal values can be detected by an alarm or by operator inspection of a performance report.The user can than call the report associated to that "MonitoredCounter" and check the values of therelated indicators in a top down approach. The related indicators are usually lower level information.Associated to those lower-level indicators, other bar-chart reports might exist enabling the user toproceed with the drill down until reaching a set of performance indicators closer to the origin of theproblem.
From the Alarm Browser it will be possible to select a specific alarm row and start a Bar-Chart RTreport.
The monitored counter (the observed performance indicator) that is affected by the alarm is alwayspresented together with additional pre-defined performance indicators.
These reports can also be called from the SPOTS-LT Report Task Tree where the reference counteris passed to the report as an extra parameter. But in this case the user will be able to select theevaluation period and will only have access to the standard outputs like any other long-term report.
Figure 2 – Reports Editor Interface.
Further, in each report description, it will be detailed the list of performance indicators that aregathered in each bar-chart report. Bar-chart report selection is done while specifying the"MonitoredCounter" from a list of possible performance indicators.
For more detailed description about functionality please consult [21].
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
186 E200301-01-714-V10.0I-01
6.2 Monitoring Panel Reports Visualization
The “Monitoring Panel” is a report dedicated to graphically monitor specific network objects (e.g. BTS,MSC, RNC, ATM Switch) that have critical conditions.
These reports have 3 rows:• “Nr. Affected Nodes”: the first row displays the number of objects that match the defined critical
condition;• “Aggr. Value (Affected)”: the second row displays the aggregated value (total or average) of the
observed variable for all objects that match the defined critical condition and for the observationperiod.
• “Aggr. Value (Total)”: the third row displays the aggregated value of the observed variable, butfor all Nodes on the network.
For each indicator presented in the Panel Report two columns are presented:
• The Current value column (“C”): the time interval when PM data was last collected from thenetwork;
• The Maximum value column (“M”): the time interval when the reference performance indicatorreaches its maximum/minimum value.
The Panel Reports are auto-refreshed.
Figure 3 – Reports Editor Interface.
The user can click on the mouse right-button to access the Report launching facility that calls a pre-defined report with the same performance indicators and assuming the parameters:• Requested objects: <all exchanges that match the defined critical condition>;• Time period: <total observation period which comprises the last 4 hours>.
The pre-defined reports associated with the Monitoring Panel are not accessible from the SPOTS LT -Reports Task tree.
For more detailed description about functionality please consult [21].
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 187
6.3 CN Circuit Switched Real-Time Reports
6.3.1 MSC Monitoring Panel Report
Report Name: MSC Monitoring Panel Report
Report Short Name: MSC_report
Target Groups: Network Operation, Network Optimisation
Description: The MSC Monitoring panel provides an overview about the overload in thenetwork.The pre-defined report launched from the monitoring panel selects its outputdata restricting the evaluation period to the maximum value of TOTALLOAD,and including only objects for which at least one performance indicatorviolated its threshold according to the respective critical condition.
Name Possible Values Remarks
(a) condition_tchAssignSuccRate
Any value ≥0 and≤100
tchAssignSuccRateThreshold.Critical condition: "<"Default = 95%
(b) condition_callSuccRate
Any value ≥0 and≤100
callSuccRate Threshold.Critical condition: "<"Default = 90%
(c) condition_TOTALLOAD
Any value ≥0 and≤100
TOTALLOAD Threshold.Critical condition: ">"Default = 700mErl
Input Parameters:
(d) condition_HOSUCC Any value ≥0 and≤100
HOSUCC Threshold.Critical condition: "<"Default = 80%
Measurements: CPMSC
Remarks: none
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
188 E200301-01-714-V10.0I-01
Layout:
MSC Monitoring Panel ReportStart Date: <START_DATE>
End Date: <END_DATE>
tchAssignSuccRate callSuccRate TOTALLOAD HOSUCC
% % mErl %Date Time Object
>95 >90 <700 >80
YYYY
-MM
-DD
HH
:mm
<Utra
n C
ell I
d>
< tch
Assi
gnSu
ccR
ate>
< cal
lSuc
cRat
e>
For C
lass
ic N
odes
(SR
*):
SYS
LOAD
CP:
TOTA
LLO
AD
For I
nnov
atio
n N
odes
(CS*
):SY
SLO
ADM
P:TO
TALL
OAD
<HO
SUC
C>
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 189
6.3.2 EXCH Bar Chart Report
Report Name: EXCH Bar Chart Report
Report Short Name: EXCHOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Input Parameters: Name Possible Values Remarks
(a) MonitoredCounter "HOTRFS""MOCSETUP""MOCANSW""MTCSETUP""MTCANSW""EMERSUCC""EMERANSW""CIPHCTRL""HLRINTER""MOSMSUCC""MTSMSUCC""HONOTALO""TMSIREAL""INTRAMSC""HOFAIL""INTMSCB""INTMSCA""SUBMSCA""SUBMSCC""HOSUCC""REQAUTH""INSSUBDA""LUPSUCC""REQSMROU""SMDELIV""SENDAL""REQMSRN""IDREQVLR""AUTHPROC""INTRAVLR""INTERVLR""UNIMEI""MOSMS""MTSMS""EMPRESPA""SSRELOP""MSMEMAV""callSetupTime""lupTime""MOCSetupSucc""MTCSetupSucc"
The layout ofthe report willcontain differentindicatorsaccording to theMonitoredcounterselected.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
190 E200301-01-714-V10.0I-01
"mhtOrig""mhtTer""hoAtt""lupReq""emerCallAtt""ciphReq""unknEquip""imeiCkMsg""traffCarrOrig""traffCarrTer""mscTraffCarr""interrUnsSubsBeh""interrUnsSyst""interrToHlr""idReqCorrFail""idReqInterwPvlrFail""idReqAuthFail""smsOutgAtt""smsIncAtt""smsSerReqAtt""hoNotAllow""hoConference""intraMscAtt""intraMscRate""incInterMscAtt""incInterMscRate""outgInterMscAtt""outgInterMscRate""subsInterMscAAtt""subsInterMscCAtt""authDataReq""unsAuth""hlrSubs""unsInsSubDtMsgSubAdmin""unsInsSubDtMsg""unsRespInsSubDt""routingInfoReqSms""sentAlertSmsServCenter""provideMsrnReq""authReq""authWithIlegSubs""reqLupIntraVlr""reqLupInterVlr""unsRespSubsBeh""unsRespSyst""unsRespUnstrucDt""sucMsMemAvail""msMemAvailToHlr""traffCarrOutgPlmn""traffCarrOutgNotPlmn""subscribers""ownSubs""foreignSubs""CALLPLOAD""TOTALLOAD""TOTCPU""mscCallAtt""callSuccRate""tchAssignSuccRate"
(b) PERIOD_KEYWORD "Today" “Lastweek”
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 191
"Yesterday""Lastweek"
means the 7previouscomplete dayscounting fromtoday.
(c) START_DATE Any date
(d) END_DATE Any date
(e) EXCH NE Symbolic Name
Measurements: MSCVLRCPHLR
Remarks: none
Layout Content:
If MonitoredCounter in:• HOTRFS• hoAtt• HOSUCC
Report presents:HOTRFS HOFAIL HOSUCC hoAtt
% % % Nr
If MonitoredCounter in:• callSetupTime• traffCarrOrig• MOCSetupSucc• MOCSETUP
Report presents:MOCSETUP MOCSetupSucc callSetupTime traffCarrOrig
% Nr sec Erl
If MonitoredCounter in:• EMERSUCC• emerCallAtt• EMERANSW
Report presents:EMERSUCC emerCallAtt EMERANSW
% Nr %
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
192 E200301-01-714-V10.0I-01
If MonitoredCounter in:• ciphReq• CIPHCTRL
Report presents:CIPHCTRL ciphReq LUPSUCC lupReq
% Nr % Nr
If MonitoredCounter in:• HLRINTER• interrUnsSyst• interrToHlr• interrUnsSubsBeh
Report presents:HLRINTER interrUnsSubsBeh interrUnsSyst interrToHlr
% Nr Nr Nr
If MonitoredCounter in:• MOSMSUCC• smsOutgAtt
Report presents:MOSMSUCC smsOutgAtt smsIncAtt SMDELIV
% Nr Nr %
If MonitoredCounter in:• MTSMSUCC• smsIncAtt• SMDELIV
Report presents:MTSMSUCC smsIncAtt smsOutgAtt SMDELIV
% Nr Nr %
If MonitoredCounter in:• HONOTALO• hoConference• hoNotAllow• HOFAIL
Report presents:HONOTALO hoNotAllow HOFAIL hoConference
% Nr % Nr
If MonitoredCounter in:• TMSIREAL
Report presents:TMSIREAL tmsiReallocAtt LUPSUCC lupReq
% Nr % Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 193
If MonitoredCounter in:• intraMscAtt• intraMscRate• INTRAMSC
Report presents:INTRAMSC intraMscAtt intraMscRate hoAtt
% Nr % Nr
If MonitoredCounter in:• incInterMscAtt• incInterMscRate• INTMSCB
Report presents:INTMSCB incInterMscAtt incInterMscRate hoAtt
% Nr % Nr
If MonitoredCounter in:• outgInterMscAtt• outgInterMscRate• INTMSCA
Report presents:INTMSCA outgInterMscAtt outgInterMscRate hoAtt
% Nr % Nr
If MonitoredCounter in:• subsInterMscCAtt• subsInterMscAAtt• SUBMSCA• SUBMSCC
Report presents:SUBMSCA subsInterMscAAtt SUBMSCC subsInterMscCAtt
% Nr % Nr
If MonitoredCounter in:• authDataReq• unsAuth• hlrSubs• REQAUTH
Report presents:REQAUTH authDataReq unsAuth hlrSubs
% Nr Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
194 E200301-01-714-V10.0I-01
If MonitoredCounter in:• unsInsSubDtMsgSubAdmin• unsInsSubDtMsg• unsRespInsSubDt• INSSUBDA
Report presents:INSSUBDA unsInsSubDtMsgSubAdmin unsInsSubDtMsg unsRespInsSubDt
% Nr Nr Nr
If MonitoredCounter in:• lupReq• lupTime• LUPSUCC
Report presents:LUPSUCC lupReq lupTime
% Nr sec
If MonitoredCounter in:• REQSMROU• routingInfoReqSms
Report presents:REQSMROU routingInfoReqSms SENDAL REQMSRN
% Nr % %
If MonitoredCounter in:• SENDAL• sentAlertSmsServCenter
Report presents:SENDAL sentAlertSmsServCenter REQSMROU REQMSRN
% Nr % %
If MonitoredCounter in:• REQMSRN• provideMsrnReq
Report presents:REQMSRN provideMsrnReq REQSMROU SENDAL
% Nr % %
If MonitoredCounter in:• idReqCorrFail• idReqInterwPvlrFail• idReqAuthFail• IDREQVLR
Report presents:IDREQVLR idReqCorrFail idReqInterwPvlrFail idReqAuthFail
% Nr Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 195
If MonitoredCounter in:• authReq• authWithIlegSubs• AUTHPROC
Report presents:AUTHPROC authReq authWithIlegSubs
% Nr Nr
If MonitoredCounter in:• reqLupIntraVlr• reqLupInterVlr• INTERVLR• INTRAVLR
Report presents:INTRAVLR INTERVLR reqLupIntraVlr reqLupInterVlr
% % Nr Nr
If MonitoredCounter in:• imeiCkMsg• unknEquip• UNIMEI
Report presents:UNIMEI unknEquip imeiCkMsg
% Nr Nr
If MonitoredCounter in:• MOSMS• smsSerReqAtt
Report presents:MOSMS smsSerReqAtt MTSMS SMDELIV
% Nr % %
If MonitoredCounter in:• MTSMS
Report presents:MTSMS smsIncAtt MOSMS SMDELIV
% Nr % %
If MonitoredCounter in:• EMPRESPA
Report presents:EMPRESPA authDataReq hlrSubs
% Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
196 E200301-01-714-V10.0I-01
If MonitoredCounter in:• SSRELOP• unsRespUnstrucDt• unsRespSyst• unsRespSubsBeh
Report presents:SSRELOP unsRespSubsBeh unsRespSyst unsRespUnstrucDt
% Nr Nr Nr
If MonitoredCounter in:• MSMEMAV• msMemAvailToHlr• sucMsMemAvail
Report presents:MSMEMAV sucMsMemAvail msMemAvailToHlr
% Nr Nr
If MonitoredCounter in:• mscTraffCarr• traffCarrOutgNotPlmn• traffCarrOutgPlmn
Report presents:mscTraffCarr traffCarrOutgNotPlmn traffCarrOutgPlmn traffCarrTer
Erl Erl Erl Erl
If MonitoredCounter in:• subscribers• ownSubs• foreignSubs
Report presents:subscribers ownSubs foreignSubs
Nr Nr Nr
If MonitoredCounter in:• CALLPLOAD• TOTALLOAD• TOTCPU• mscCallAtt
Report presents:CALLPLOAD TOTALLOAD TOTCPU mscCallAtt
mErl mErl Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 197
If MonitoredCounter in:• callSuccRate• tchAssignSuccRate
Report presents:callSuccRate mscCallAtt tchAssignSuccRate TOTALLOAD
% Nr % mErl
If MonitoredCounter in:• mhtOrig• MOCANSW
Report presents:MOCANSW MOCSetupSucc mhtOrig traffCarrOrig
% Nr sec ErlIf MonitoredCounter in:• MTCSETUP• traffCarrTer• MTCSetupSucc
Report presents:MTCSETUP MTCSetupSucc callSetupTime traffCarrTer
% Nr sec Erl
If MonitoredCounter in:• mhtTer• MTCANSW
Report presents:MTCANSW MTCSetupSucc mhtTer traffCarrTer
Nr Nr sec Erl
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
198 E200301-01-714-V10.0I-01
6.3.3 LOCAR Bar Chart Report
Report Name: LOCAR Bar Chart Report
Report Short Name: LOCAROC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) LOCAR Local Area Code
Input Parameters:
(e) MonitoredCounter "PAGEREQ""succPag""pagProc""retryPag"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: LOCAREA
Remarks: none
Layout Content:
If MonitoredCounter in:• succPag• pagProc• retryPag• PAGEREQ
Report presents:PAGEREQ succPag pagProc retryPag
% Nr Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 199
6.3.4 CELL Bar Chart Repor t
Report Name: CELL Bar Chart Report
Report Short Name: CELLOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) CELL Cell Id
Input Parameters:
(e) MonitoredCounter "ACDCSUCC""CSDCSUCC""callAtt""callsWithAswr"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: INTCREL
Remarks: none
Layout Content:
If MonitoredCounter in:• callAtt• callsWithAswr• ACDCSUCC• CSDCSUCC
Report presents:ACDCSUCC CSDCSUCC CallsWithAswr CallAtt
% % Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
200 E200301-01-714-V10.0I-01
6.3.5 ANGRP Bar Chart Report
Report Name: ANGRP Bar Chart Report
Report Short Name: ANGRPOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) ANGRP Announcement Group
Input Parameters:
(e) MonitoredCounter "totalCalls""succCalls""TC_N""TC"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: ANGRP
Remarks: none
Layout Content:
If MonitoredCounter in:• totalCalls• succCalls• TC_N• TC
Report presents:totalCalls succCalls TC_N TC
Nr Nr dErl dErl
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 201
6.4 CN Packet Switched Real-Time Reports
6.4.1 BIAS Load Monitoring Panel Report
Report Name: BIAS Load Monitoring Panel Report
Report Short Name: BIASLoad_report
Target Groups: Network Operation, Network Optimisation
Description: The BIAS Load Monitoring panel provides an overview about the load on theBIAS processors.The pre-defined report launched from the monitoring panel selects its outputdata restricting the evaluation period to the maximum value ofbiasLoadMonProcessorUsage, and including only objects for which at leastone performance indicator violated its threshold according to the respectivecritical condition.
Name Possible Values Remarks
(a) condition_TotalIngressOvlDiscards
Any value ≥0 and≤100
TotalIngressOvlDiscardsThreshold.Critical condition: ">"Default = 0
(b) condition_TotalEgressOvlDiscards
Any value ≥0 and≤100
TotalEgressOvlDiscardsThreshold.Critical condition: ">"Default = 0
(c) condition_HeavyOvlEvtCount
Any value ≥0 and≤100
HeavyOvlEvtCountThreshold.Critical condition: ">"Default = 0
(d) condition_ProcessorUsage
Any value ≥0 and≤100
ProcessorUsageThreshold.Critical condition: ">"Default = 70%
Input Parameters:
(e) condition_InputBufferUsage
Any value ≥0 and≤100
InputBufferUsageThreshold.Critical condition: ">"Default = 10%
Measurements: biasLoad
Remarks: none
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
202 E200301-01-714-V10.0I-01
Layout:
BIAS Load Monitoring Panel ReportStart Date: <START_DATE>
End Date: <END_DATE>
TotalIngressOvlDiscards
TotalEgressOvlDiscards
HeavyOvlEvtCount ProcessorUsage InputBufferUsage
Nr Nr Nr % %Date Time Object
=0 =0 =0 <70 <10
YYYY
-MM
-DD
HH
:mm
<Utra
n C
ell I
d>
<bia
sLoa
dMon
Tota
lIngr
essO
vlD
isca
rds>
<bia
sLoa
dMon
Tota
lEgr
essO
vlD
isca
rds>
< bia
sLoa
dMon
Hea
vyO
vlEv
tCou
nt>
<bia
sLoa
dMon
Proc
esso
rUsa
ge>
< bia
sLoa
dMon
Inpu
tBuf
ferU
sage
>
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 203
6.4.2 APN Bar Chart Report
Report Name: APN Bar Chart Report
Report Short Name: APNOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) MonitoredCounter " tspscApnAttActivateSessions""tspscApnSuccActivateSessions""tspscApnCurrentSessions""tspscApnActivationSuccRate"
The layout of thereport will containdifferentindicatorsaccording to theMonitored counterselected.
(b) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previous completedays countingfrom today.
(c) START_DATE Any date(d) END_DATE Any date
Input Parameters:
(e) APN Application Point Number
Measurements: GPRS-apn
Remarks: none
Layout Content:
If MonitoredCounter in:• tspscApnActivationSuccRate• tspscApnAttActivateSessions• tspscApnSuccActivateSessions• tspscApnCurrentSessions
Report presents:
tspscApnActivatioSuccRate tspscApnSuccActivateSessions
tspscApnCurrentSessions
tspscApnAttActivateSessions
% Nr Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
204 E200301-01-714-V10.0I-01
6.4.3 CARD Bar Chart Report
Report Name: CARD Bar Chart Report
Report Short Name: CARDOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previouscomplete dayscounting fromtoday.
(b) START_DATE Any date(c) END_DATE Any date(d) CARD Processor Card
Input Parameters:
(e) MonitoredCounter "gtpInPkts""gtpInOctets""gtpInRejectedPkts""gtpOutDataOctets""gtpOutSigOctets""gtpInRejectionRate""tspcSuccessfulSessions""tspcRefusedSessions""tspcCurrentSessions""tspcSessionSuccRate""qosInteracDataPktsCounter""qosBackgrDataPktsCounter""qosDataPkts""ovNbrDiscDataHighPrio""ovNbrDiscDataLowPrio""ovNbrDiscSignHighPrio""ovNbrDiscSignLowPrio"
The layout ofthe report willcontain differentindicatorsaccording to theMonitoredcounterselected.
Measurements: GPRS-gtpGPRS-qosGPRS-ovlGPRS-tspc
Remarks: none
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 205
Layout Content:
If MonitoredCounter in:• gtpOutDataOctets• gtpOutSigOctets
Report presents:gtpOutDataOctets gtpOutSigOctets gtpInRejectionRate gtpInOctets
bps bps % bps
If MonitoredCounter in:• gtpInRejectionRate• gtpInPkts• gtpInOctets• gtpInRejectedPkts
Report presents:gtpInRejectionRate gtpInOctets gtpInPkts gtpInRejectedPkts
% bps Pkts/s Pkts
If MonitoredCounter in:• tspcSessionSuccRate• tspcCurrentSessions• tspcRefusedSessions• tspcSuccessfulSessions
Report presents:tspcSessionSuccRate tspcSuccessfulSessions tspcRefusedSessions tspcCurrentSessions
% Nr Nr Nr
If MonitoredCounter in:• qosDataPkts• qosInteracDataPktsCounter• qosBackgrDataPktsCounter
Report presents:qosDataPkts qosBackgrDataPktsCounter qosInteracDataPktsCounter
Pkts/s Pkts/s Pkts/s
If MonitoredCounter in:• ovNbrDiscDataHighPrio• ovNbrDiscDataLowPrio• ovNbrDiscSignHighPrio• ovNbrDiscSignLowPrio
Report presents:ovNbrDiscDataHighPrio ovNbrDiscDataLowPrio ovNbrDiscSignHighPrio ovNbrDiscSignLowPrio
Nr Nr Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
206 E200301-01-714-V10.0I-01
If MonitoredCounter in:• biasLoadMonTotalEgressOvlDiscards
Report presents:biasLoadMon
TotalEgressOvlDiscardsbiasLoadMon
HeavyOvlEvtCountbiasLoadMon
ProcessorUsagebiasLoadMon
InputBufferUsageNr Nr % %
If MonitoredCounter in:• biasLoadMonTotalIngressOvlDiscards• biasLoadMonHeavyOvlEvtCount• biasLoadMonProcessorUsage• biasLoadMonInputBufferUsage
Report presents:biasLoadMon
TotalIngressOvlDiscardsbiasLoadMon
HeavyOvlEvtCountbiasLoadMon
ProcessorUsagebiasLoadMon
InputBufferUsageNr Nr % %
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 207
6.4.4 VRINDEX Bar Chart Report
Report Name: VRINDEX Bar Chart Report
Report Short Name: VRINDEXOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) VRINDEX Virtual Router Index
Input Parameters:
(e) MonitoredCounter "giNbrActiveSess""giNbrSuccSess""giNbrRefusedSess""giNbrOfRefusedSessLackIpAddress""giNbrSessUpperThresholdExceed""giSessActivationSuccRate"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: GPRS-gi
Remarks: none
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
208 E200301-01-714-V10.0I-01
Layout Content:
If MonitoredCounter in:• giNbrActiveSess• giNbrSuccSess
Report presents:giNbrActiveSess giSessActivationSuccRate giNbrRefusedSess giNbrSuccSess
Nr % Nr Nr
If MonitoredCounter in:• giSessActivationSuccRate• giNbrRefusedSess• giNbrOfRefusedSessLackIpAddress• giNbrSessUpperThresholdExceed
Report presents:
giSessActivationSuccRate giNbrRefusedSess giNbrOfRefusedSessLackIpAddress
giNbrSessUpperThresholdExceed
% Nr Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 209
6.4.5 SLOTPORT Bar Chart Report
Report Name: SLOTPORT Bar Chart Report
Report Short Name: SLOTPORTOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previouscomplete dayscounting fromtoday.
(b) START_DATE Any date(c) END_DATE Any date(d) SLOTPORT Slot Number concatenated
with Port Number
Input Parameters:
(e) MonitoredCounter "rnetAtmTxCells""rnetAtmDiscardsTxQueueOvfCells""rnetAtmCellHeaderErrorRatio""rnetAtmMisroutedCellRate""rnetAtmRxCells""rnetProtocolDSX3IntervalESs""rnetProtocolDSX3IntervalSESs""rnetProtocolDSX3IntervalERSs""rnetProtocolDSX3IntervalSERSs""sonetFarEndLineIntervalESs""sonetFarEndLineIntervalSESs""sonetFarEndLineIntervalCVs""sonetFarEndLineIntervalUASs""sonetFarEndPathIntervalESs""sonetFarEndPathIntervalSESs""sonetFarEndPathIntervalCVs""sonetFarEndPathIntervalUASs""sonetLineIntervalESs""sonetLineIntervalSES""sonetLineIntervalCVs""sonetLineIntervalUASs""sonetPathIntervalESs""sonetPathIntervalSESs""sonetPathIntervalCVs""sonetPathIntervalUASs""sonetSectionIntervalESs""sonetSectionIntervalSESs""sonetSectionIntervalSEFSs""sonetSectionIntervalCVs""ifOutDiscards""ifOutErrors""ifOutQLen"
The layout ofthe report willcontain differentindicatorsaccording to theMonitoredcounterselected.
Measurements: mib2interface36140-ATMInterfaceStatistics36140-STM1-FarEndLine36140-STM1-FarEndPath
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
210 E200301-01-714-V10.0I-01
36140-STM1-Line36140-STM1-Path36140-STM1-section
Remarks: none
Layout Content:
If MonitoredCounter in:• rnetAtmDiscardsTxQueueOvfCells• rnetAtmTxCells
Report presents:rnetAtmTxCells rnetAtmDiscardsTxQueueOvfCells rnetAtmRxCells
bps Nr bps
If MonitoredCounter in:• rnetAtmRxCells• rnetAtmMisroutedCellRate• rnetAtmCellHeaderErrorRatio
Report presents:
rnetAtmRxCells rnetAtmTxCells rnetAtmCellHeaderErrorRatio rnetAtmMisroutedCellRate
bps bps % %
If MonitoredCounter in:• rnetProtocolDSX3IntervalESs• rnetProtocolDSX3IntervalSESs• rnetProtocolDSX3IntervalERSs• rnetProtocolDSX3IntervalSERSs
Report presents:
rnetProtocolDSX3IntervalESs rnetProtocolDSX3IntervalSESs
rnetProtocolDSX3IntervalERSs
rnetProtocolDSX3IntervalSERSs
sec sec sec sec
If MonitoredCounter in:• sonetFarEndLineIntervalESs• sonetFarEndLineIntervalSESs• sonetFarEndLineIntervalCVs• sonetFarEndLineIntervalUASs
Report presents:
sonetFarEndLineIntervalESs sonetFarEndLineIntervalSESs sonetFarEndLineIntervalCVs
sonetFarEndLineIntervalUASs
sec sec sec sec
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 211
If MonitoredCounter in:• sonetFarEndPathIntervalESs• sonetFarEndPathIntervalSESs• sonetFarEndPathIntervalCVs• sonetFarEndPathIntervalUASs
Report presents:
sonetFarEndPathIntervalESs sonetFarEndPathIntervalSESs sonetFarEndPathIntervalCVs
sonetFarEndPathIntervalUASs
sec sec sec sec
If MonitoredCounter in:• sonetLineIntervalESs• sonetLineIntervalSES• sonetLineIntervalCVs• sonetLineIntervalUASs
Report presents:
sonetLineIntervalESs sonetLineIntervalSES sonetLineIntervalCVs sonetLineIntervalUASs
sec sec sec sec
If MonitoredCounter in:• sonetPathIntervalESs• sonetPathIntervalSESs• sonetPathIntervalCVs• sonetPathIntervalUASs
Report presents:
sonetPathIntervalESs sonetPathIntervalSESs sonetPathIntervalCVs sonetPathIntervalUASs
sec sec sec sec
If MonitoredCounter in:• sonetSectionIntervalESs• sonetSectionIntervalSESs• sonetSectionIntervalSEFSs• sonetSectionIntervalCVs
Report presents:
sonetSectionIntervalESs sonetSectionIntervalSESs sonetSectionIntervalSEFSs
sonetSectionIntervalCVs
sec sec sec sec
If MonitoredCounter in:• ifOutDiscards• ifOutOctets• ifOutErrors• ifOutQLen
Report presents:
ifOutDiscards ifOutErrors ifOutQLen ifOutOctets
Nr Nr Nr bps
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
212 E200301-01-714-V10.0I-01
6.4.6 DLC Bar Chart Report
Report Name: DLC Bar Chart Report
Report Short Name: DLCOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) DLC Data Link Connection
Input Parameters:
(e) MonitoredCounter "frPVCEndptInDiscards""frPVCEndptInOctets""frPVCEndptOutOctets""frPVCEndptInDiscardRate"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: 36140-frPVCEndpointStatistics
Remarks: none
Layout Content:
If MonitoredCounter in:• frPVCEndptInDiscards• frPVCEndptInOctets• frPVCEndptOutOctets• frPVCEndptInDiscardRate
Report presents:frPVCEndptInDiscardRate frPVCEndptOutOctets frPVCEndptInOctets frPVCEndptInDiscards
% bps bps Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 213
6.4.7 VPL Bar Chart Report
Report Name: VPL Bar Chart Report
Report Short Name: VPLOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) VPL Virtual Path Link
Input Parameters:
(e) MonitoredCounter "atmVplStatTotalCellIns""atmVplStatTotalDiscards""atmVplStatTotalCellOuts""atmVplStatDiscardRate"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: 36140-atmEndPoint-vpl
Remarks: none
Layout Content:
If MonitoredCounter in:• atmVplStatTotalCellIns• atmVplStatTotalDiscards• atmVplStatTotalCellOuts• atmVplStatDiscardRate
Report presents:atmVplStatTotalCellIns atmVplStatTotalDiscards atmVplStatTotalCellOuts atmVplStatDiscardRate
bps Nr bps %
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
214 E200301-01-714-V10.0I-01
6.4.8 VCL Bar Chart Report
Report Name: VCL Bar Chart Report
Report Short Name: VCLOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) VCL Virtual Circuit Link
Input Parameters:
(e) MonitoredCounter "atmVclStatTotalCellIns""atmVclStatTotalDiscards""atmVclStatTotalCellOuts""atmVclStatDiscardRate"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: 36140-atmEndPoint-vcl
Remarks: none
Layout Content:
If MonitoredCounter in:• atmVclStatTotalCellIns• atmVclStatTotalDiscards• atmVclStatTotalCellOuts• atmVclStatDiscardRate
Report presents:atmVclStatTotalCellIns atmVclStatTotalDiscards atmVclStatTotalCellOuts atmVclStatDiscardRate
bps Nr bps %
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 215
6.4.9 MIB2IFINDEX Bar Chart Report
Report Name: MIB2IFINDEX Bar Chart Report
Report Short Name: MIB2IFINDEXOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) MIB2IFINDEX MIB2 Interface Index
Input Parameters:
(e) MonitoredCounter "ifSpeed""ifOperStatus""ifInOctets""ifInDiscards""ifInErrors""ifInUnknownProtos""ifOutOctets"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: mib2interface
Remarks: none
Layout Content:
If MonitoredCounter in:• ifInOctets• ifOutOctets• ifOperStatus• ifSpeed
Report presents:ifInOctets ifOutOctets ifOperStatus ifSpeed
bps bps Nr bps
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
216 E200301-01-714-V10.0I-01
If MonitoredCounter in:• ifInDiscards• ifInErrors• ifInUnknownProtos
Report presents:ifInDiscards ifInErrors ifInUnknownProtos ifInOctets
Nr Nr Nr bps
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 217
6.4.10 VR Bar Chart Report
Report Name: VR Bar Chart Report
Report Short Name: VROC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) VR Virtual Router ID
Input Parameters:
(e) MonitoredCounter "ipInReceives""ipInHdrErrors""ipInAddrErrors""ipForwDatagrams""ipInUnknownProtos""ipInDiscards""ipInDelivers""ipOutRequests""ipOutDiscards""ipOutNoRoutes""ipReasmReqds""ipReasmOKs""ipReasmFails""ipFragOKs""ipFragFails""ipFragCreates""ipRoutingDiscards""ipFragFailRate""ipReasmFailRate"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: mib2ip
Remarks: none
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
218 E200301-01-714-V10.0I-01
Layout Content:
If MonitoredCounter in:• ipInReceives• ipInDelivers• ipForwDatagrams
Report presents:ipInReceives ipInDelivers ipInDiscards ipForwDatagrams
Pkts/s Pkts/s Nr Nr
If MonitoredCounter in:• ipInDiscards• ipInHdrErrors• ipInUnknownProtos• ipInAddrErrors
Report presents:ipInDiscards ipInHdrErrors ipInAddrErrors ipInUnknownProtos
Nr Nr Nr Nr
If MonitoredCounter in:• ipOutRequests• ipOutDiscards• ipOutNoRoutes• ipRoutingDiscards
Report presents:ipOutRequests ipOutDiscards ipOutNoRoutes ipRoutingDiscards
Pkts/s Nr Nr Nr
If MonitoredCounter in:• ipReasmReqds• ipReasmOKs• ipReasmFails• ipReasmFailRate
Report presents:ipReasmReqds ipReasmOKs ipReasmFails ipReasmFailRate
Nr Nr Nr %
If MonitoredCounter in:• ipFragOKs• ipFragCreates• ipFragFailRate• ipFragFails
Report presents:ipFragOKs ipFragFails ipFragCreates ipFragFailRate
bps bps Nr %
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 219
6.4.11 RADIUSACC Bar Char t Report
Report Name: RADIUSACC Bar Chart Report
Report Short Name: RADIUSACCOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previouscomplete dayscounting fromtoday.
(b) START_DATE Any date(c) END_DATE Any date(d) RADIUSACC RADIUS Accounting Server
Input Parameters:
(e) MonitoredCounter "radiusAccClientRoundTripTime""radiusAccClientRequests""radiusAccClientRetransmissions""radiusAccClientResponses""radiusAccClientMalformedResponses""radiusAccClientBadAuthenticators""radiusAccClientPendingRequests""radiusAccClientTimeouts""radiusAccClientUnknownTypes""radiusAccClientPacketsDropped""radiusAccProcSuccRate""radiusAccClientRespFailureRate""radiusAccClientRetransRate"“radiusAccSuccessfullyReceived”
The layout ofthe report willcontain differentindicatorsaccording to theMonitoredcounterselected.
Measurements: mib2radiusAcc
Remarks: none
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
220 E200301-01-714-V10.0I-01
Layout Content:
If MonitoredCounter in:• radiusAccClientMalformedResponses• radiusAccClientBadAuthenticators• radiusAccClientUnknownTypes• radiusAccClientPacketsDropped• radiusAccClientResponses• radiusAccClientRespFailureRate
Report presents:radiusAccClient
ResponsesradiusAccClientRespFailureRate
A B
Nr % Nr Nr
A = The last samples of the following indicators (radiusAccClientMalformedResponses;radiusAccClientBadAuthenticators; radiusAccClientUnknownTypes; radiusAccClientPacketsDropped)are compared and the Indicator with the highest value is shown in this column. Or, case the highestbelongs to the MonitoredCounter, the Indicator selected is the one with the second highest value.
B = MonitoredCounter if MonitoredCounter in (radiusAccClientMalformedResponses;radiusAccClientBadAuthenticators; radiusAccClientUnknownTypes; radiusAccClientPacketsDropped)or else, the second highest value from the list: (radiusAccClientMalformedResponses;radiusAccClientBadAuthenticators; radiusAccClientUnknownTypes; radiusAccClientPacketsDropped)
If MonitoredCounter in:• radiusAccClientTimeouts• radiusAccClientRequests• radiusAccClientRoundTripTime• radiusAccClientPendingRequests
Report presents:radiusAccClient
TimeoutsradiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientPendingRequests
Nr sec Nr Nr
If MonitoredCounter in:• radiusAccProcSuccRate• radiusAccSuccessfullyReceived
Report presents:radiusAccProc
SuccRateradiusAcc
SuccessfullyReceivedradiusAccClient
RequestsradiusAccClientRespFailureRate
% Nr Nr %
If MonitoredCounter in:• radiusAccClientRetransRate• radiusAccClientRetransmissions
Report presents:radiusAccClient
RetransRateradiusAccClientRetransmissions
radiusAccSuccessfullyReceived
radiusAccClientRequests
% Nr Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 221
6.4.12 RADIUSAUTH Bar Chart Report
Report Name: RADIUSAUTH Bar Chart Report
Report Short Name: RADIUSAUTHOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previouscomplete dayscounting fromtoday.
(b) START_DATE Any date(c) END_DATE Any date(d) RADIUSAUTH RADIUS Authentication Server
Input Parameters:
(e) MonitoredCounter "radiusAuthClientRoundTripTime""radiusAuthClientAccessRequests""radiusAuthClientAccessRetransmissions""radiusAuthClientAccessAccepts""radiusAuthClientAccessRejects""radiusAuthClientAccessChallenges""radiusAuthClientMalformedAccessResponses""radiusAuthClientBadAuthenticators""radiusAuthClientPendingRequests""radiusAuthClientTimeouts""radiusAuthClientUnknownTypes""radiusAuthClientPacketsDropped""radiusAuthProcSuccRate""radiusAuthClientRespFailureRate""radiusAuthClientRetransRate"“radiusAuthSuccessfullyReceived”“TotalIncomingPackets”
The layout ofthe report willcontaindifferentindicatorsaccording tothe Monitoredcounterselected
Measurements: mib2radiusAuth
Remarks: none
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
222 E200301-01-714-V10.0I-01
Layout Content:
If MonitoredCounter in:• radiusAuthClientMalformedAccessResponses• radiusAuthClientRespFailureRate• radiusAuthClientUnknownTypes• radiusAuthClientBadAuthenticators• radiusAuthClientPacketsDropped
Report presents:TotalIncomingPackets radiusAuthClient
RespFailureRateA B
Nr % Nr Nr
A = The last samples of the following indicators (radiusAuthClientMalformedAccessResponses;radiusAuthClientBadAuthenticators; radiusAuthClientUnknownTypes;radiusAuthClientPacketsDropped) are compared and the Indicator with the highest value is shown inthis column. Or, case the highest belongs to the MonitoredCounter, the Indicator selected is the onewith the second highest value.
B = MonitoredCounter if MonitoredCounter in (radiusAuthClientMalformedAccessResponses;radiusAuthClientBadAuthenticators; radiusAuthClientUnknownTypes;radiusAuthClientPacketsDropped) or else, the second highest value from the list:(radiusAuthClientMalformedResponses; radiusAuthClientBadAuthenticators;radiusAuthClientUnknownTypes; radiusAuthClientPacketsDropped)
If MonitoredCounter in:• radiusAuthClientTimeouts• radiusAuthClientPendingRequests• radiusAuthClientRoundTripTime• radiusAuthSuccessfullyReceived
Report presents:radiusAuthClient
TimeoutsradiusAuthClientRoundTripTime
radiusAuthClientPendingRequests
radiusAuthSuccessfullyReceived
Nr sec Nr Nr
If MonitoredCounter in:• radiusAuthClientAccessRequests• radiusAuthProcSuccRate
Report presents:
radiusAuthProcSuccRate TotalIncomingPackets
radiusAuthClientAccessRequests
radiusAuthClientRespFailureRate
% Nr Nr %
If MonitoredCounter in:• radiusAuthClientAccessRejects• radiusAuthClientAccessAccepts• radiusAuthClientAccessChallenges• TotalIncomingPackets
Report presents:TotalIncomingPac
ketsradiusAuthClientAccessAccepts
radiusAuthClientAccessRejects
radiusAuthClientAccessChallenges
Nr Nr Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 223
If MonitoredCounter in:• radiusAuthClientRetransRate• radiusAuthClientAccessRetransmissions
Report presents:radiusAuthClient
RetransRateradiusAuthClient
AccessRetransmissionsTotalIncomingPackets radiusAuthClient
AccessRequests% Nr Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
224 E200301-01-714-V10.0I-01
6.4.13 BVC Bar Chart Report
Report Name: BVC Bar Chart Report
Report Short Name: BVCOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previous completedays countingfrom today.
(b) START_DATE Any date(c) END_DATE Any date(d) BVC BSSAP Virtual Connection
Input Parameters:
(e) MonitoredCounter "gbBVCNbrOfLLCFramesUplink""gbBVCNbrOfLLCFramesDownlink""gbBVCNbrOfLLCOctetsUplink""gbBVCNbrOfLLCOctetsDownlink"
The layout of thereport will containdifferentindicatorsaccording to theMonitored counterselected.
Measurements: BVC
Remarks: none
Layout Content:
If MonitoredCounter in:• gbBVCNbrOfLLCFramesUplink• gbBVCNbrOfLLCFramesDownlink• gbBVCNbrOfLLCOctetsUplink• gbBVCNbrOfLLCOctetsDownlink
Report presents:gbBVCNbrOfLLC
FramesUplinkgbBVCNbrOfLLCFramesDownlink
gbBVCNbrOfLLCOctetsUplink
gbBVCNbrOfLLCOctetsDownlink
Pkts/s Pkts/s bps bps
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 225
6.4.14 NSE Bar Chart Report
Report Name: NSE Bar Chart Report
Report Short Name: NSEOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting fromtoday.
(b) START_DATE Any date(c) END_DATE Any date(d) NSE Network Service Entity
Input Parameters:
(e) MonitoredCounter "gbNbrOfResetPerNSE""gbNbrOfSuspendsPerNSE""gbNbrOfResumesPerNSE""gbCumulativeDownTimeperNSE"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: NSE
Remarks: none
Layout Content:
If MonitoredCounter in:• gbNbrOfResetPerNSE• gbNbrOfSuspendsPerNSE• gbNbrOfResumesPerNSE• gbCumulativeDownTimeperNSE
Report presents:gbNbrOfReset
PerNSEgbNbrOfSuspends
PerNSEgbNbrOfResumes
PerNSEgbCumulative
DownTimeperNSENr Nr Nr sec
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
226 E200301-01-714-V10.0I-01
6.4.15 NSVC Bar Chart Report
Report Name: NSVC Bar Chart Report
Report Short Name: NSVCOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previous completedays countingfrom today.
(b) START_DATE Any date(c) END_DATE Any date(d) NSVC Network Service Virtual
Connection
Input Parameters:
(e) MonitoredCounter "gbNbrOfDiscPduPerNSVC""gbNbrOfResetPerNSVC""gbNbrOfOctetsPerNSVCUplink""gbNbrOfOctetsPerNSVCDownlink"
The layout of thereport will containdifferentindicatorsaccording to theMonitored counterselected.
Measurements: NSVC
Remarks: none
Layout Content:
If MonitoredCounter in:• gbNbrOfDiscPduPerNSVC• gbNbrOfResetPerNSVC• gbNbrOfOctetsPerNSVCUplink• gbNbrOfOctetsPerNSVCDownlink
Report presents:gbNbrOfDiscPdu
PerNSVCgbNbrOfReset
PerNSVCgbNbrOfOctetsPerNSVCUplink
gbNbrOfOctetsPerNSVCDownlink
Nr Nr bps bps
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 227
6.4.16 CAPN Bar Chart Report
Report Name: CAPN Bar Chart Report
Report Short Name: CAPNOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(f) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previous completedays countingfrom today.
(g) START_DATE Any date(h) END_DATE Any date(i) APN Access Point Name
Input Parameters:
(j) MonitoredCounter MSACTIVPDPSSUCCACTVPDPSACTIVEPDPSMSDEACTVPDPS
The layout of thereport will containdifferentindicatorsaccording to theMonitored counterselected.
Measurements: C_GPRSAPN
Remarks: none
Layout Content:
If MonitoredCounter in:• MSACTIVPDPS• SUCCACTVPDPS• ACTIVEPDPS• MSDEACTVPDPSReport presents:
MSACTIVPDPS SUCCACTVPDPS ACTIVEPDPS MSDEACTVPDPS
Nr Nr Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
228 E200301-01-714-V10.0I-01
6.4.17 CMIB2IFINDEX Bar Chart Report
Report Name: CMIB2IFINDEX Bar Chart Report
Report Short Name: CMIB2IFINDEXOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(k) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previous completedays countingfrom today.
(l) START_DATE Any date(m) END_DATE Any date(n) INTERF Interface Index
Input Parameters:
(o) MonitoredCounter ifInOctetsifOutOctetsifOperStatusifSpeedifInDiscardsifInErrorsifInUnknownProtosifOutDiscardsifOutErrorsifOutQLen
The layout of thereport will containdifferentindicatorsaccording to theMonitored counterselected.
Measurements: C_MIB2INT
Remarks: None
Layout Content:
If MonitoredCounter in:• ifInOctets• ifOutOctets• ifOperStatus• ifSpeedReport presents:
ifInOctets ifOutOctets ifOperStatus ifSpeed
bps bps Nr bps
If MonitoredCounter in:• ifInDiscards• ifInErrors• ifInUnknownProtos
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 229
Report presents:
ifInOctets ifInDiscards ifInErrors ifInUnknownProtos
bps Nr Nr Nr
If MonitoredCounter in:• ifOutOctets• ifOutDiscards• ifOutErrors• ifOutQLenReport presents:
ifOutDiscards ifOutOctets ifOutErrors ifOutQlen
Nr bps Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
230 E200301-01-714-V10.0I-01
6.4.18 CGGSN Bar Chart Report
Report Name: CGGSN Bar Chart Report
Report Short Name: CGGSNOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(p) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previous completedays countingfrom today.
(q) START_DATE Any date(r) END_DATE Any date(s) INTERF Interface Index
Input Parameters:
(t) MonitoredCounter SentGPDUsRecvGPDUsSentSigMsgsRecvdSigMsgsTotCreatPDPsTotDeletePDPsActiveRejPDPsOutResPDPsUsedBandWDPremMeanThPutNormMeanThPutBeffMeanThPut
The layout of thereport will containdifferentindicatorsaccording to theMonitored counterselected.
Measurements: C_GPRSGTPC_GPRSGGSNC_GPRSQOS
Remarks: None
Layout Content:
If MonitoredCounter in:• SentGPDUs• RecvGPDUs• SentSigMsgs• RecvdSigMsgsReport presents:
SentGPDUs RecvGPDUs SentSigMsgs RecvdSigMsgs
Pkt/s Pkt/s Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 231
If MonitoredCounter in:• TotCreatPDPs• TotDeletePDPs• ActiveRejPDPs• OutResPDPsReport presents:
TotCreatPDPs TotDeletePDPs ActiveRejPDPs OutResPDPs
Nr Nr Nr Nr
If MonitoredCounter in:• UsedBandWD• PremMeanThPut• NormMeanThPut• BeffMeanThPutReport presents:
UsedBandWD PremMeanThPut NormMeanThPut BeffMeanThPut
bps bps bps bps
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
232 E200301-01-714-V10.0I-01
6.5 VAS Real-Time Repor ts
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 233
6.5.1 MSP Bar Chart Report
Report Name: MSP Bar Chart Report
Report Short Name: MSPOC_BC
Target Groups: Network Operation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek”means the 7previous completedays countingfrom today.
(b) START_DATE Any date(c) END_DATE Any date(d) MSP NE Name
Input Parameters:
(e) MonitoredCounter CCGNOTDEFUSRAGNOAGFROMAUTHSRVNOAGINIPRANGESPERFCLASSNOTDEFUNAGFROMAUTHSRV
The layout of thereport will containdifferentindicatorsaccording to theMonitored counterselected.
Measurements: MSPSERVICE
Remarks: none
Layout Content:
If MonitoredCounter is:
• CCGNOTDEFUSRAG
Report presents:
CCGNOTDEFUSRAG NOAGFROMAUTHSRV NOAGINIPRANGES PERFCLASSNOTDEF
Nr Nr Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
234 E200301-01-714-V10.0I-01
If MonitoredCounter is:
• NOAGFROMAUTHSRV
Report presents:
NOAGFROMAUTHSRV NOAGINIPRANGES PERFCLASSNOTDEF UNAGFROMAUTHSRV
Nr Nr Nr Nr
If MonitoredCounter is:
• NOAGINIPRANGES
Report presents:
NOAGINIPRANGES PERFCLASSNOTDEF UNAGFROMAUTHSRV CCGNOTDEFUSRAG
Nr Nr Nr Nr
If MonitoredCounter is:
• PERFCLASSNOTDEF
Report presents:
PERFCLASSNOTDEF UNAGFROMAUTHSRV CCGNOTDEFUSRAG NOAGFROMAUTHSRV
Nr Nr Nr Nr
If MonitoredCounter is:
• UNAGFROMAUTHSRV
Report presents:
UNAGFROMAUTHSRV CCGNOTDEFUSRAG NOAGFROMAUTHSRV NOAGINIPRANGES
Nr Nr Nr Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 235
6.6 GERAN Real-Time Reports
6.6.1 BTS Monitoring Panel Report
Report Name: BTS Monitoring Panel Report
Report Short Name: GCell_report
Target Groups: Network Operation, Network Optimisation
Description: The Geran Cell monitoring panel provides a network overview about criticalvalues on the most representative performance indicators of the BTS. Thoseindicators are the TCH drops per Erlang-hour (TCHDropErlh), the call setupsuccess rate (CSSuccRate), the TCH loss rate due to lack of radio resources(TCHLossRate), the handover drop rate (HODropRate) and the total trafficcarried expressed in Erlangs (TCHTraffCarrDR).The pre-defined report launched from the monitoring panel selects its outputdata restricting the evaluation period to the maximum value ofTCHTraffCarrDR, and including only objects for which at least oneperformance indicator violated its threshold according to the respectivecritical condition.
Name Possible Values Remarks
(a) condition_CSSuccRate
Any value ≥0 and≤100
CSSuccRate Threshold.Critical condition: "<"Default = 95%
(b) condition_TCHDropErlh
Any value ≥0 TCHDropErlh Threshold.Critical condition: ">"Default = 0.5
(c) condition_TCHLossRate
Any value ≥0 and≤100
TCHLossRate Threshold.Critical condition: ">"Default = 1%
(d) condition_HODropRate
Any value ≥0 and≤100
HODropRate Threshold.Critical condition: ">"Default = 2%
Input Parameters:
(e) condition_TCHTraffCarrDR
Any value ≥0 TCHTraffCarrDRThreshold.Critical condition: "="Default = 0Erl
Measurements: From SCANBTS functional group:ATIMASCAATSDCMBSMEBUSTCHNACSUCPRNMSGDISQNRFLSDCCNRFLTCHNSUCCHPCSINTHINTSUIMASCATACCBPROTASSATTTASSFAILTASSSUCCUNIHIALCUNIHIRLC
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
236 E200301-01-714-V10.0I-01
From SCANBTSOHON functional group:ATINBHDONRUNINHDSUINBHDO
Remarks: none
Layout:
BTS Monitoring Panel ReportStart Date: <START_DATE>
End Date: <END_DATE>
CSSuccRate TCHDropErlh TCHLossRate HODropRate TCHTraffCarrDR
% Nr % % ErlDate Time Object
>95 <0.5 <1 <2 >0
YYYY
-MM
-DD
HH
:mm
<Utra
n C
ell I
d>
<CSS
uccR
ate>
<TC
HD
ropE
rlh>
<TC
HLo
ssR
ate>
<HO
Dro
pRat
e>
<TC
HTr
affC
arrD
R>
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 237
6.6.2 BTS Bar Chart Report
Report Name: BTS Bar Chart Report
Report Short Name: BTSOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Input Parameters: Name Possible Values Remarks
(a) MonitoredCounter "defTch""TCHEffDR""TCHLossRateWSDR""avgWaitingTime""TCHLossRateDR""TCHTrafCarrDR""TCHMHTDR""CSSuccRateBSS""CSSucc""SuccDirRetry""HOSuccRate""HODropRate""ImpHORate""TCHDropRate""TCHDrop""MTBTCHDrop""TCHDropErlh""defSdcch""SDCCHEff""SDCCHLossRate""SDCCHTrafCarr""SDCCHMHT""ImmAssSuccRate""ImmAssSucc""ImmAssAtt""sdcchActFailRate""sdcchActAtt""sdcchHOSuccRate""sdcchHOAtt""SDCCHDropRate""SDCCHDrop""MTBSDCCHDrop""SDCCHDropErlh""IntraCellHOSuccRate""InterBSCHOSuccRate""InterCellHOSuccRate""IntraCellHOSucc""InterBSCHOSucc""InterCellHOSucc""IntraCellHOAtt""InterBSCHOAtt"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
238 E200301-01-714-V10.0I-01
"InterCellHOAtt""IntraCellHODrop""InterBSCHODrop""InterCellHODrop""HODrop""HOAtt""AssSuccRate""QueFailRate""QueFail""AssAtt""PDAccSuccRate""PAccRejConUL""PAccRejConDL""MeanPDCHConf""MeanUserDataULGb""MeanSigDataULGb""MeanDataULGb""MeanUserDataDLGb""MeanSigDataDLGb""MeanDataDLGb""MeanUserDataULUm""MeanSigDataULUm""MeanDataULUm""MeanUserDataDLUm""MeanSigDataDLUm""MeanDataDLUm""TCHLoss""TCHLossRate""HOIndRejRate""HOIndRejections""MeanDataThrGb"
(b) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(c) START_DATE Any date
(d) END_DATE Any date
(e) BTS Cell Symbolic Name
Measurements: From SCANBTSOHON functional group:ATINBHDONRUNINHDSUINBHDO
All scanners from SCANBTS functional group, with the following exceptions:AMRCHDISMBTCHAMRMEITCHIBNAVTCHSDNDFTCHSDNNNOTNCHNTCHSDCMTASSATVSTASSUCVSTNMSCNCLTNSUDHSC
All scanners from SCANBTSGPRS functional group.
Remarks: none
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 239
Layout Content:
If MonitoredCounter in:• TCHEffDR
Report presents:TCHEffDR defTch TCHTrafCarrDR CSSuccRateBSS
% Nr Erl %
If MonitoredCounter in:• TCHLossRateWSDR• avgWaitingTime
Report presents:TCHLossRateWSDR defTch TCHTrafCarrDR avgWaitingTime
% Nr Erl sec
If MonitoredCounter in:• TCHLossRateDR• defTch• TCHMHTDR• TCHTrafCarrDR
Report presents:TCHLossRateDR defTch TCHTrafCarrDR TCHMHTDR
% Nr Erl sec
If MonitoredCounter in:• CSSuccRateBSS
Report presents:CSSuccRateBSS ImmAssSuccRate AssSuccRate SDCCHDropRate
% % % %
If MonitoredCounter in:• CSSucc• SuccDirRetry
Report presents:SuccDirRetry CSSucc TCHTrafCarrDR TCHLossRateDR
Nr Nr Erl %
If MonitoredCounter in:• HOSuccRate
Report presents:HOSuccRate IntraCellHOSuccRate InterBSCHOSuccRate InterCellHOSuccRate
% % % %
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
240 E200301-01-714-V10.0I-01
If MonitoredCounter in:• HODropRate• TCHDropRate• HODrop• TCHDrop
Report presents:HODropRate HODrop TCHDropRate TCHDrop
% Nr % Nr
If MonitoredCounter in:• ImpHORate
Report presents:ImpHORate HODropRate TCHDropErlh SDCCHDropErlh
% % Nr Nr
If MonitoredCounter in:• MTBTCHDrop
Report presents:MTBTCHDrop CSSucc TCHDrop TCHTrafCarrDR
sec Nr Nr Erl
If MonitoredCounter in:• TCHDropErlh
Report presents:TCHDropErlh CSSucc TCHDrop HODrop
Nr Nr Nr Nr
If MonitoredCounter in:• SDCCHEff
Report presents:SDCCHEff defSdcch SDCCHTrafCarr ImmAssSuccRate
% Nr Erl %
If MonitoredCounter in:• defSdcch• SDCCHLossRate• SDCCHTrafCarr• SDCCHMHT
Report presents:SDCCHLossRate defSdcch SDCCHTrafCarr SDCCHMHT
% Nr Erl sec
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 241
If MonitoredCounter in:• ImmAssSuccRate• ImmAssAtt
Report presents:ImmAssSuccRate ImmAssAtt sdcchActFailRate SDCCHLossRate
% Nr % %
If MonitoredCounter in:• sdcchActFailRate• sdcchActAtt• sdcchHOSuccRate• sdcchHOAtt
Report presents:sdcchActFailRate sdcchHOSuccRate sdcchHOAtt sdcchActAtt
% % Nr Nr
If MonitoredCounter in:• SDCCHDropRate• SDCCHDrop• SDCCHDropErlh
Report presents:SDCCHDropRate SDCCHDrop SDCCHDropErlh ImmAssSucc
% Nr Nr Nr
If MonitoredCounter in:• ImmAssSucc• MTBSDCCHDrop
Report presents:MTBSDCCHDrop ImmAssSucc SDCCHDrop SDCCHTrafCarr
sec Nr Nr Erl
If MonitoredCounter in:• IntraCellHOAtt• IntraCellHODrop• IntraCellHOSuccRate
Report presents:IntraCellHOSuccRate HOAtt IntraCellHOAtt IntraCellHODrop
% Nr Nr Nr
If MonitoredCounter in:• InterBSCHOAtt• InterBSCHODrop• InterBSCHOSuccRate
Report presents:InterBSCHOSuccRate HOAtt InterBSCHOAtt InterBSCHODrop
% Nr Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
242 E200301-01-714-V10.0I-01
If MonitoredCounter in:• InterCellHOAtt• InterCellHODrop• InterCellHOSuccRate
Report presents:InterCellHOSuccRate HOAtt InterCellHOAtt InterCellHODrop
% Nr Nr Nr
If MonitoredCounter in:• IntraCellHOSucc
Report presents:IntraCellHOSucc IntraCellHOSuccRate HOIndRejRate IntraCellHOAtt
Nr % % Nr
If MonitoredCounter in:• InterBSCHOSucc
Report presents:InterBSCHOSucc InterBSCHOSuccRate HOIndRejRate InterBSCHOAtt
Nr % % Nr
If MonitoredCounter in:• InterCellHOSucc
Report presents:InterCellHOSucc InterCellHOSuccRate HOIndRejRate InterCellHOAtt
Nr % % Nr
If MonitoredCounter in:• AssAtt• AssSuccRate
Report presents:AssSuccRate AssAtt TCHLossRate QueFailRate
% Nr % %
If MonitoredCounter in:• QueFail• QueFailRate
Report presents:QueFailRate QueFail defTch TCHTrafCarrDR
% Nr Nr Erl
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 243
If MonitoredCounter in:• PDAccSuccRate• PAccRejConUL• PAccRejConDL• MeanPDCHConf
Report presents:PDAccSuccRate PAccRejConUL PAccRejConDL MeanPDCHConf
% Nr Nr Nr
If MonitoredCounter in:• MeanSigDataULGb• MeanDataULGb• MeanUserDataULGb
Report presents:MeanUserDataULGb MeanSigDataULGb MeanDataULGb PDAccSuccRate
kbps kbps kbps %
If MonitoredCounter in:• MeanSigDataDLGb• MeanDataDLGb• MeanUserDataDLGb
Report presents:MeanUserDataDLGb MeanSigDataDLGb MeanDataDLGb PDAccSuccRate
kbps kbps kbps %
If MonitoredCounter in:• MeanUserDataULUm
Report presents:MeanUserDataULUm MeanUserDataULGb PAccRejConUL MeanPDCHConf
kbps kbps Nr Nr
If MonitoredCounter in:• MeanSigDataULUm
Report presents:MeanSigDataULUm MeanSigDataULGb PAccRejConUL MeanPDCHConf
kbps kbps Nr Nr
If MonitoredCounter in:• MeanDataULUm
Report presents:MeanDataULUm MeanDataULGb PAccRejConUL MeanPDCHConf
kbps kbps Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
244 E200301-01-714-V10.0I-01
If MonitoredCounter in:• MeanUserDataDLUm
Report presents:MeanUserDataDLUm MeanUserDataDLGb PAccRejConDL MeanPDCHConf
kbps kbps Nr Nr
If MonitoredCounter in:• MeanSigDataDLUm
Report presents:MeanSigDataDLUm MeanSigDataDLGb PAccRejConDL MeanPDCHConf
kbps kbps Nr Nr
If MonitoredCounter in:• MeanDataDLUm
Report presents:MeanDataDLUm MeanDataDLGb PAccRejConDL MeanPDCHConf
kbps kbps Nr Nr
If MonitoredCounter in:• TCHLossRate• TCHLoss
Report presents:TCHLossRate TCHTrafCarrDR defTch TCHLoss
% Erl Nr Nr
If MonitoredCounter in:• HOAtt• HOIndRejections• HOIndRejRate
Report presents:HOIndRejRate HOAtt HOIndRejections TCHDropErlh
% Nr Nr Nr
If MonitoredCounter in:• MeanDataThrGb• SDCCHLossRate• SDCCHTrafCarr• SDCCHMHT
Report presents:MeanDataThrGb MeanDataDLGb MeanDataULGb MeanPDCHConf
kbps kbps kbps Nr
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 245
6.6.3 TRX Bar Chart Report
Report Name: TRX Bar Chart Report
Report Short Name: TRXOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) TRX TRX Id
Input Parameters:
(e) MonitoredCounter "TRXAvail" The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: From SCANTRX functional group:TRANAVTI
Remarks: none
Layout Content:
If MonitoredCounter in:• TRXAvail
Report presents:TRXAvail
%
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
246 E200301-01-714-V10.0I-01
6.6.4 BSC Bar Chart Report
Report Name: BSC Bar Chart Report
Report Short Name: BSCOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) BSC BSC Symbolic Name
Input Parameters:
(e) MonitoredCounter "MPPCLoad""TDPCLoad"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: From SCANBSC functional group:BSCPRCLD
Remarks: none
Layout Content:
If MonitoredCounter in:• TDPCLoad• MPPCLoad
Report presents:TDPCLoad MPPCLoad
% %
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 247
6.6.5 BTSM Bar Chart Report
Report Name: BTSM Bar Chart Report
Report Short Name: BTSMOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) BTSM BTSM Symbolic Name
Input Parameters:
(e) MonitoredCounter "BTSEPRLD" The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: From SCANBTSM functional group:BTSEPRLD
Remarks: none
Layout Content:
If MonitoredCounter in:• BTSEPRLD
Report presents:BTSEPRLD
%
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
248 E200301-01-714-V10.0I-01
6.7 UTRAN Real-Time Reports
6.7.1 UCELL Monitoring Panel Report
Report Name: UCELL Monitoring Panel Report
Report Short Name: ucell_report
Target Groups: Network Operation, Network Optimisation
Description: The Utran Cell monitoring panel provides a network overview about criticalvalues on the most representative performance indicators of the Utran cell,which are the Cell Load per Spreading Factor (CELLLOADPSF), the CallSetup Success Rate (CSSR), the Connection drop Rate (ConDR) and theBranch Addition Success Rate (BranchAddSR).The pre-defined report launched from the monitoring panel selects its outputdata restricting the evaluation period to the maximum value ofCELLLOADPSF, and including only objects for which at least oneperformance indicator violated its threshold according to the respectivecritical condition.
Name Possible Values Remarks
(a) condition_CELLLOADPSF
Any value ≥0 and≤100
CELLLOADPSF Threshold.Critical condition: ">"Default = 80%
(b) condition_CSSRAccProb
Any value ≥0 and≤100
CSSRAccProb Threshold.Critical condition: "<"Default = 90%
(c) condition_ConDR Any value ≥0 and≤100
ConDR Threshold.Critical condition: ">"Default = 5%
Input Parameters:
(d) condition_BranchAddSR
Any value ≥0 and≤100
BranchAddSR Threshold.Critical condition: "<"Default = 80%
Measurements: From RNC:uuCodesUsedrabEstabAttrabEstabSuccrrcEstabAttrrcEstabSuccshoAddIntraNodeBAttshoAddIntraNodeBSuccshoAddIntraRncAttshoAddIntraRncSuccshoAddInterRncAttshoAddInterRncSucciuRelCmdiuRelReq
Remarks: none
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 249
Layout:
UCELL Monitoring Panel ReportStart Date: <START_DATE>
End Date: <END_DATE>
CELLLOADPSF CSSRAccProb ConDR BranchAddSR
% % % %Date Time Object
<80 >90 <5 >80
YYYY
-MM
-DD
HH
:mm
<Utra
n C
ell I
d>
<CEL
LLO
ADPS
F>
<CSS
RAc
cPro
b>
<Con
DR
>
<Bra
nchA
ddSR
>
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
250 E200301-01-714-V10.0I-01
6.7.2 RNC Monitoring Pane l Report
Report Name: RNC Monitoring Panel Report
Report Short Name: RNCProc_report
Target Groups: Network Operation, Network Optimisation
Description: The RNC Processor Load Monitoring panel provides an overview about theload on the RNC processors.The pre-defined report launched from the monitoring panel selects its outputdata restricting the evaluation period to the maximum value ofPRLCUSAGE_MEA, and including only objects for which at least oneperformance indicator violated its threshold according to the respectivecritical condition.
Name Possible Values Remarks
(a) condition_PRLCUSAGE_MEA
Any value ≥0 and≤100
PRLCUSAGE_MEAThreshold.Critical condition: ">"Default = 70%
(b) condition_PRLCAllocSR
Any value ≥0 and≤100
PRLCAllocSR Threshold.Critical condition: "<"Default = 95%
(c) condition_DHTUSAGE_MEA
Any value ≥0 and≤100
DHTUSAGE_MEAThreshold.Critical condition: ">"Default = 70%
Input Parameters:
(d) condition_DHTAllocSR
Any value ≥0 and≤100
DHTAllocSR Threshold.Critical condition: "<"Default = 95%
Measurements: From RNC:dhtUsagedhtAllocAttdhtAllocSuccprlcUsageprlcAllocAttprlcAllocSucc
Remarks: none
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 251
Layout:
RNC Monitoring Panel ReportStart Date: <START_DATE>
End Date: <END_DATE>
PRLCUSAGE_MEA PRLCAllocSR DHTUSAGE_MEA DHTAllocSR
% % % %Date Time Object
<70 >95 <70 >95
YYYY
-MM
-DD
HH
:mm
<Utra
n C
ell I
d>
<PR
LCU
SAG
E_M
EA>
<PR
LCAl
locS
R>
<DH
TUSA
GE_
MEA
>
<DH
TAllo
cSR
>
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
252 E200301-01-714-V10.0I-01
6.7.3 UCELL Bar Chart Report
Report Name: UCELL Bar Chart Report
Report Short Name: UCELLOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) MonitoredCounter "CSSRAccProb""CSSRConv""MHTConv""CSSRStream""MHTStream""CSSRInter""MHTInter""CSSRBackg""MHTBackg""ConDR""ConD""UnNormalConRR""UnNormalCR""SHORate_1""BranchAddSR""HHOSRIntraNB""CELLLOADPSF""PCHDISCRATE""FACHDISCRATE""RRCEstabAtt""RRCEstabAttConv""RRCEstabAttStrem""RRCEstabAttInter""RRCEstabAttBackg""SHOSucc""HHOSucc""SHOAtt""HHOAtt""RABEstabSucc""FACHUSAGE""PCHUSAGE""CodesUsed""CodeAllocSR""IuReleases"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
(b) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(c) START_DATE Any date
Input Parameters:
(d) END_DATE Any date
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 253
(e) UCELL UTRAN Cell SymbolicName
Measurements: From RNC:hhoAllOutAtthhoAllOutFailhhoAllOutSucciuRelCmdiuRelReqrabEstabAttrabEstabFailrabEstabSuccrabPerQosClassrabRelrrcEstabAttrrcEstabSuccshoAddIntraNodeBAttshoAddIntraNodeBSuccshoAddInterRncAttshoAddInterRncSuccshoAddIntraRncAttshoAddIntraRncSuccuesPerActiveLinkSetSizeuuCodesUseduuCodeReqAttuuCodeReqSuccpchUsageRatepchDiscardRatefachUsageRatefachDiscardRate
Remarks: none
Layout Content:
If MonitoredCounter in:• CSSRAccProb• RRCEstabAtt• RABEstabSucc
Report presents:CSSRAccProb RRCEstabAtt RABEstabSucc CELLLOADPSF
% Nr Nr %
If MonitoredCounter in:• CSSRConv• MHTConv• RRCEstabAttConv
Report presents:CSSRConv RRCEstabAttConv MHTConv CELLLOADPSF
% Nr sec %
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
254 E200301-01-714-V10.0I-01
If MonitoredCounter in:• CSSRStream• MHTStream• RRCEstabAttStrem
Report presents:CSSRStream RRCEstabAttStream MHTStream CELLLOADPSF
% Nr sec %
If MonitoredCounter in:• CSSRInter• MHTInter• RRCEstabAttInter
Report presents:CSSRInter RRCEstabAttInter MHTInter CELLLOADPSF
% Nr sec %
If MonitoredCounter in:• CSSRBackg• MHTBackg• RRCEstabAttBackg
Report presents:CSSRBackg RRCEstabAttBackg MHTBackg CELLLOADPSF
% Nr sec %
If MonitoredCounter in:• ConDR• ConD
Report presents:ConDR IuReleases ConD CELLLOADPSF
% Nr Nr %
If MonitoredCounter in:• UnNormalConRR• UnNormalCR• IuReleases
Report presents:UnNormalConRR IuReleases UnNormalCR CELLLOADPSF
% Nr Nr %
If MonitoredCounter in:• SHORate_1
Report presents:SHORate_1 BranchAddSR RABEstabSucc CELLLOADPSF
% % Nr %
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 255
If MonitoredCounter in:• BranchAddSR• SHOSucc• SHOAtt
Report presents:BranchAddSR SHOAtt SHOSucc CELLLOADPSF
% Nr Nr %
If MonitoredCounter in:• HHOSRIntraNB• HHOSucc• HHOAtt
Report presents:HHOSRIntraNB HHOAtt HHOSucc CELLLOADPSF
% Nr Nr %
If MonitoredCounter in:• CELLLOADPSF• CodesUsed• CodeAllocSR
Report presents:CELLLOADPSF CodesUsed CodeAllocSR CSSRAccProb
% Nr % %
If MonitoredCounter in:• PCHDISCRATE• FACHDISCRATE• FACHUSAGE• PCHUSAGE
Report presents:PCHDISCRATE FACHUSAGE PCHUSAGE FACHDISCRATE
% % % %
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
256 E200301-01-714-V10.0I-01
6.7.4 RNC Bar Chart Report
Report Name: RNC Bar Chart Report
Report Short Name: RNCOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) RNC RNC ID
Input Parameters:
(e) MonitoredCounter "PRLCUSAGE_MEA""DHTUSAGE_MEA""DHTAllocSR""PRLCAllocSR""PRLCBUSYTIME""DHTBUSYTIME""PRLCBUSYRATE""DHTBUSYRATE"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: From RNC:dhtUsagedhtBusyTimedhtAllocAttdhtAllocSuccprlcUsageprlcBusyTimeprlcAllocAttprlcAllocSucc
Remarks: none
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 257
Layout Content:
If MonitoredCounter in:• PRLCUSAGE_MEA• PRLCAllocSR• PRLCBUSYTIME• PRLCBUSYRATE
Report presents:PRLCUSAGE_MEA PRLCBUSYTIME PRLCBUSYRATE PRLCAllocSR
% sec % %
If MonitoredCounter in:• DHTUSAGE_MEA• DHTAllocSR• DHTBUSYTIME• DHTBUSYRATE
Report presents:
DHTUSAGE_MEA DHTBUSYTIME DHTBUSYRATE DHTAllocSR
% sec % %
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
258 E200301-01-714-V10.0I-01
6.7.5 STM1LINE Bar Chart Report
Report Name: STM1LINE Bar Chart Report
Report Short Name: STM1LINEOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) STM1LINE STM1 Physical Line
Input Parameters:
(e) MonitoredCounter "STMLDiscCellsCong""STMLDiscCongRate""STM1TxUsageRate""STM1RxUsageRate"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: From RNC:discardedCellsCongestionlineIncomingCellslineOutgoingCells
Remarks: none
Layout Content:
If MonitoredCounter in:• STMLDiscCellsCong• STMLDiscCongRate• STM1TxUsageRate• STM1RxUsageRate
Report presents:STMLDiscCellsCong STM1TxUsageRate STM1RxUsageRate STMLDiscCongRate
Nr % % %
Siemens Performance Reports (SPOTS V10 Drop 4) Siemens SA
E200301-01-714-V10.0I-01 259
6.7.6 E1LINE Bar Chart Report
Report Name: E1LINE Bar Chart Report
Report Short Name: E1LINEOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) E1LINE E1 Physical Line
Input Parameters:
(e) MonitoredCounter "ELTxRate""ELOutCells""ELIncCells"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: From RNC:lineIncomingCellslineOutgoingCellsdiscardedCellsHecViolation
Remarks: none
Layout Content:
If MonitoredCounter in:• ELTxRate• ELOutCells• ELIncCells
Report presents:ELTxRate ELIncCells ELOutCells
kbps Nr Nr
Siemens SA Siemens Performance Reports (SPOTS V10 Drop 4)
260 E200301-01-714-V10.0I-01
6.7.7 STM1VP Bar Chart Report
Report Name: STM1VP Bar Chart Report
Report Short Name: STM1VPOC_BC
Target Groups: Network Operation, Network Optimisation
Description: This report receives as input parameter the name of a performance indicator(the "MonitoredMetric"). The name must be selected from the list of PossibleValues for the input parameter "MonitoredMetric".The report then returns a time evolution for the "MonitoredMetric" and otherrelated indicators. The related indicators are a pre-defined set assigned toeach "MonitoredMetric". The Layout Content field of this description providesthe correspondence between "MonitoredMetric" name and related set ofperformance indicators.
Name Possible Values Remarks
(a) PERIOD_KEYWORD "Today""Yesterday""Lastweek"
“Lastweek” meansthe 7 previouscomplete dayscounting from today.
(b) START_DATE Any date(c) END_DATE Any date(d) STM1VP STM1 Virtual Path Code
Input Parameters:
(e) MonitoredCounter "STMVPCong""STMVPCellLossRatio""STMVPOutCells""STMVPIncCells"
The layout of thereport will containdifferent indicatorsaccording to theMonitored counterselected.
Measurements: From RNC:vpvcIncomingCellsvpvcOutgoingCellscellLossRatiocongestionOfVP
Remarks: none
Layout Content:
If MonitoredCounter in:• STMVPCong• STMVPCellLossRatio• STMVPOutCells• STMVPIncCells
Report presents:STMVPCong STMVPOutCells STMVPIncCells STMVPCellLLossRatio
% Nr Nr %