_BTT_SGT400.fh11 04.08.2005 13:17 Uhr Seite 1
Probedruck
C M Y CM MY CY CMY K
Power Generation
Industrial Applications
Basic Technology Training – Operation and Maintenance
SGT-400 Industrial Gas Turbine
Course ObjectiveTo provide customers‘ personnel responsible for dayto day operation and maintenance of the SGT-400gas turbine with an insight into its design, majorcomponents, thermodynamics, applications andprinciple of operation.
Course StructureThe course is designed to provide the course delegatewith an understanding of the principles of gas turbineoperation and specific knowledge of the SGT-400gas turbine, its computerised control and associatedsystems. A combination of theoretical and practicaltraining is provided in classrooms, with state-of-the-art training aids and in our extensively equippedtraining workshop.
Course Duration and LocationThe standard duration of this course is 5 days.For course availability, please contact LincolnProduct Training Department:
Phone: +44 1522 583337Phone: +44 1522 583338
Who should attend:All rotating machinery operation and maintenancepersonnel. The course content can be tailored foreither new or experienced staff.
Basic Technology Training
_BTT_SGT400.fh11 04.08.2005 13:17 Uhr Seite 2
Probedruck
C M Y CM MY CY CMY K
Course TopicsEnvironmental Health and Safety (EHS)
Gas Turbine: operation, construction and component function
Turbine Systems: combustion air, ventilation air, instrument air, lubricating oil, hydraulic oil, starting, fuel and anti-surge system, function andoperation
Control System: operator interface
Control System Operation: VDU mimics, operatorpanel functions, control system status, warningand shutdown messages
Start Sequence: preparation for starting, runningand stopping with associated control messages
Governor: basic function and operation
Temperature Monitoring: basic function and operation
Peripheral Equipment: fire and gas panel, batterycharger, motor control centre, driven unit
Servicing: routine maintenance and water washprocedures
Monitoring: data logging and condition monitoring
Support Documentation: operator manual, illustrated parts catalogue, service bulletins andnotice to operators
Delegate Assessment Published by and copyright © 2005:Siemens AGPower GenerationFreyeslebenstrasse 191058 Erlangen, Germany
Industrial ApplicationsWolfgang-Reuter-Platz47053 Duisburg, Germany
Siemens IndustrialTurbomachinery, Inc.10730 Telge RoadHouston, Texas 77095, USA
e-mail: [email protected]/powergeneration
Order No. A96001-S90-A341-X-4A00Printed in Germany1386 176942M DA 0805.5
All rights reserved.Subject to change without prior notice.Printed on paper treated with chlorine-freebleach.
Trademarks mentioned in this documentare the property of Siemens AG, itsaffiliates, or their respective owners.
The information in this document containsgeneral descriptions of the technical optionsavailable, which may not apply in all cases.The required technical options shouldtherefore be specified in the contract.
