Download - Serology New
Serological Tests:An introduction
Chalee Sienes-Reyes, RMT, MS-MT
Jasmen S. Pasia, RMT, MS-MT
Aileen Grace Ang, RMT, MAST-Bio
Francis Ian L. Salaver, RMT
Antigen-Antibody Interactions 3 categories:
1.Primary or Initial Reactions2.Secondary interactions3.Tertiary interactions
Primary or Initial Interactions
Initial Ag-Ab interaction occurs almost instantaneously and is rarely directly visible
Visualization is accomplished by labelling Ab or Ag withRadioactive labelsFluorescent dyesEnzymatic markers
Primary or Initial Interactions Techniques
Are known as primary binding tests
Considered as the most sensitiveInclude the following
Radioimmunoassay (RIA)Enzyme immunoassay (EIA) or Enzyme-
linked immunosorbent assay (ELISA)Immunofluorescent (IF) test
Secondary Interactions
Ag-Ab interactions which involve building a lattice to form visible aggregates of precipitates or agglutinates
Less sensitive but do not require sophisticated instruments
Secondary Interactions Techniques
Reactions are known as secondary binding tests
IncludePrecipitationAgglutinationNeutralizationComplement-fixation
Tertiary Interactions
Biologic expressions of Ag-Ab interaction that may either be beneficial or harmful to the body
These consequences of immune response in vivo are measured by tertiary binding tests
SECONDARY BINDING TESTS
Francis Ian L. Salaver, RMT
1. Affinity and Avidity
2. Ag:Ab ratio
3. Location and concentration of antigenic determinants on the particle
4. pH 6.8-7.0
5. Physical forms of the antigen
1. Soluble
2. Cellular/Particulate
6. Temperature
7. Length of incubation
8. Centrifugation
Factors Affecting Measurement of Ag/Ab Reactions
Effect of temperature
13
Equivalence point: (suitable proportion between the virus particles and
RBCs)
Precipitation Curve
• Prozone – antibody excess, many antibodies coat all antigen sites- results in false negative
• Postzone – antigen excess, antibody coats antigen but cannot get lattice formation, results in false negative
• Zone of Equivalence – antigen and antibody present in optimal proportions to bind and give visible reaction
Affinity and Avidity
Agglutination
• When the antigen is particulate, the reaction of an antibody with the antigen can be detected by agglutination (clumping) of the antigen.
• The general term agglutinin is used to describe antibodies that agglutinate particulate antigens.
16
All antibodies can theoretically agglutinate particulate antigens but IgM, due to its high valence, is particularly good agglutinin and one sometimes infers that an antibody may be of the IgM class if it is a good agglutinating antibody.
Agglutination• Qualitative and quantitative• Quantitation of agglutination tests to detect
specific Abs is done by titration• The reciprocal of the highest dilution giving
a positive reaction is known as titer and provides a measure of the amount of antibody in the serum
• A fourfold or more increase in the antibody titer between a paired sera is significant
Agglutination
Tube 1
Tube 2
Tube 3
Tube 4
Tube 5 Tube 6 Tube 7
SALINE 1 1 1 1 1 1 1
SERUM 1 1 of1:2 1 of1:4 1 of1:8 1 of1:16 1 of1:32 1 of1:64
FINAL DILUTION
1:2 1:4 1:8 1:16 1:32 1:64 1:128
Agglutination• Agglutinins
– Antibodies that produce such reactions
• Involves two-step process:– Sensitization or initial
binding– Lattice formation or
formation of large aggregates
20
SENSITIZATIONSENSITIZATION
04/08/23 Dr.T.V.Rao MD 21
Secondary Phenomenon • Lattice Formation• The Fab portion of the Ig molecule attaches to
antigens on 2 adjacent cells-visible results in agglutination
• If both antigen and antibody are SOLUBLE reaction will become visible over time, ie, precipitation
04/08/23 22
23
Agglutination
• Direct Agglutination– Slide Agglutination Test– Plate Agglutination Test– Tube Agglutination Test
• Passive Agglutination Test– Slide Agglutination Test– Plate Agglutination Test– Tube Agglutination Test
• Haemagglutination test (HAT)
Direct Immune Agglutination
• Ag is an intrinsic component of the particle (bacteria, rbc)
• Used to determine whether Ab is present in biological fluids such as serum, urine, CSF
• Used primarily for diagnosis of infectious disease
• In case in which particle is RBC, reaction is referred to as hemagglutination
Direct Immune Agglutination
• ABO Blood Grouping
• Hemeagglutination• Cold Hemagglutinatinin Test
• Heterophile Agglutinin Test
• Bacterial Agglutination• Widal test
• VDRL, RPR
27
Slide Agglutination TestQualitative Agglutination
• Antigen: isolated Salmonella in suspension• Antibody: specific antisera against Salmonella• Place test Salmonella in a drop of saline on a
slide • Add a drop of antiserum, mix and rock slide for
approx 1 minute• Examine for agglutination
28
Slide Agglutination Test
Agglutination TechniquesSlide Test
• primarily for screening large number of sera (undiluted sera)
• rapid and sensitive
• use glass slides or disposable test cards
Agglutination TechniquesSlide Test
• If (+) reactivity is obtained using undiluted serum, serial dilution of serum is done to determine Ab titer
• False (-) can occur when Ab titer in undiluted serum is too high
Reading/Grading Agglutination Reading/Grading Agglutination ReactionsReactions
• Pseudo agglutination or the Rouleaux Formation also occurs– Red blood cells appear as stacks of coins.
• Addition of physiologic Nacl will disperse pseudo agglutination
• Saline Replacement is done after pseudo agglutination is observed so that it may not give false negative result due to the dilution effect of the saline
31
Agglutination TechniquesMicrotiter Plate Tests
• serial dilution of serum sample to determine the Ab titer
• Constant amount of Ag is added to each serum containing well, rotated and titer is read
33
34
Tube Agglutination Test
• Also known as the standard agglutination test or serum agglutination test (SAT)
• Test serum is diluted in a series of tubes (doubling dilutions)
• Constant defined amount of antigen is then added to each tube and tubes incubated for the required time.
• Particular antigen clumps at the bottom of the test tube
No agglutinationAgglutination
1/10 1/20 1/40 1/80 1/160 1/320 Neg. ctrl
In this case, the titre is 1/40
Tube Agglutination Test
GRADING AGGLUTINATION REACTIONS
GRADE DESCRIPTION Appearance
Negative (-) No aggregates
Weak (+/-) Tiny aggregates that are barely visible macroscopically; turbid and reddish supernatant
1+ A few small aggregates just visible macroscopically; turbid and reddish supernatant
04/08/23 Dr.T.V.Rao MD 36
2+ Medium-sized aggregates; clear supernatant
3+ Several large aggregates; clear supernatant
4+ One solid aggregate; clear supernatant
04/08/23 Dr.T.V.Rao MD 37
Identify what type of Agglutination reaction
Identify what type of Agglutination reaction
Indirect (Passive)Agglutination
• Refers to agglutination of–Antigen-coated RBC
–Inert particles (latex, charcoal, bentonite or colloidal gold) which are passive carriers of otherwise soluble Ags
41
Passive Agglutination Test
• Converting a precipitating test to an agglutinating test???
• Chemically link soluble antigen to inert particles such as LATEX or RBC
• Addition of specific antibody will cause the particles to agglutinate
• Reverse PAT: antibody linked to LATEX
e.g. Lancefield grouping in Streptococci.
Passive hemagglutination: The agglutination test only works with particulate antigens. However, it is
possible to coat erythrocytes with a soluble antigen and use the coated red blood cells in an agglutination test for antibody to the soluble antigen. This is called passive hemagglutination.
The test is performed just like the agglutination test. Applications include detection of antibodies to soluble antigens and detection of antibodies to viral antigens.
Passive (indirect) agglutination
Examples of types
– latex agglutination– passive hemagglutination (treated red blood
cells made resistant)Examples of tests - agglutination for leptospirosis
Widal test (typhoid fever)
Reverse Passive Agglutination
Antibody is bound to the carrier molecule, which is then mixed with patient’s sample to detect antigen.
Principle– antigen binds to soluble antibody coated on
carrier particles and results in agglutination – detects antigens
Example– detecting cholera toxin
Reverse Passive agglutination
Reverse Agglutination
• Ab is attached to the particles and the biological sample is tested for the presence of Ag
• Used to detect the presence of CRP
• A protein secreted into the blood during a inflammatory response
Reverse Agglutination: CRP
• Anti-CRP antibodies are affixed to to the latex particles
• Mixed with the serum of patients to detect the presence of CRP
Reverse Passive Latex Agglutination Test for RF
• RF is found in 75-80% of patients with RA
• RF is usually IgM Ab that reacts with new antigenic determinants on the Fc portion of IgG
• RF reagent• Latex particles coated with anti-RF
antibodies
Co-agglutinationCo-agglutination
• Co agglutination is similar to the latex agglutination technique for detecting antigen.
• Protein A, a uniformly distributed cell wall component of Staphylococcus aureus, is able to bind to the Fc region of most IgG isotype antibodies leaving the Fab region free to interact with antigens present in the applied specimens.
• The visible agglutination of the S. Aureus particles indicates the antigen-antibody reactions
49
Co agglutination TestCo agglutination Test
Agglutination test in which inert particles (latex beads or heat-killed S aureus Cowan 1 strain with protein A) are coated with antibody to any of a variety of antigens and then used to detect the antigen in specimens or in isolated bacteria.
04/08/23 Dr.T.V.Rao MD 50
51
Haemagglutination
Direct Non-Immune Hemagglutination
Principle– many human viruses have the ability to bind to
the surface structures on red blood cells from different species thereby causing agglutination
Example– influenza virus binds to fowl’s red blood cells
53
Haemagglutination
RBC
54
Viral Haemagglutination• Some viruses and microbes contain proteins
which bind to erythrocytes (red blood cells) causing them to clump together
55
Viral Hemagglutination
• the attachment of viral particles by their receptor sites to more than 1 cell.
• As more and more cells become attached in this manner agglutination becomes visible
Negative control well (only RBCs+ buffer) (no haemagglutinin)
Positive control well (contains haemagglutinin)
Titer = 32 HA units/ml
Hemagglutination test: method
1:8
1:2 1:21:21:21:2
8 16 32 64 128 256
virus
serial dilution
mix with red blood cells
side view
top view
One HA unit :minimum amount of virus that causes complete agglutination of RBCs
59
HEMAGGLUTINATION INHIBITION TEST (HI)
VIRUSE SERUM
60
In the absence of anti-virus antibodies
Erythrocytes
Virus
Virus agglutination of erythrocytes
61
In the presence of anti-virus antibodies
Erythrocytes
Virus Anti-virus antibodies
Viruses unable to bind to
the erythrocytes
62
Coombs Test : Agglutination Test
• The Coombs test is actually two separate tests: the "direct" and "indirect" Coombs tests.
63
Coombs (Antiglobulin)TestsCoombs (Antiglobulin)Tests
04/08/23 Dr.T.V.Rao MD 64
• Incomplete Ab• Direct Coombs Test
– Detects antibodies on erythrocytes
+ ↔
Patient’s RBCs Coombs Reagent(Antiglobulin)
Coombs Test Direct ant globulin test (also called the
Coombs’ test,
04/08/23 Dr.T.V.Rao MD 65
Coombs (Antiglobulin)TestsCoombs (Antiglobulin)Tests • Indirect Coombs Test
– Detects anti-erythrocyte antibodies in serum
04/08/23 Dr.T.V.Rao MD 66
Patient’s Serum
TargetRBCs
+ ↔Step 1
+ ↔
Coombs Reagent(Ant globulin)
Step 2
Application of Coombs Application of Coombs (Antiglobulin)Tests(Antiglobulin)Tests
• Applications–Detection of
anti-Rh Ab
–Autoimmune hemolytic anemia
04/08/23 Dr.T.V.Rao MD 67
68
WASHING RBCs
69
Why do we have to wash RBCs?
• To obtain pure RBCs and to get rid from any other blood components such as WBCs, immune complexes, and Abs
70
Washing process
• Take place 4-5 time .
• Until get clear solution above the RBCs after centrifugation .
• Using PBS or normal saline .
Note :(avoid using water to wash RBCs because it will definitely lead to RBCs lyses)
71
Procedure
• Obtain blood samples in tubes, spin at 1500 RPM for 5 minutes.
• Draw off the supernatant using Pasteur pipette.
• Add 2ml PBS to each tube and move to a clean test tube.
• Centrifuge again.
• Each time draw off the washing solution and add 10 ml PBS until the solution above the RBCs layer becomes clear.
Neutralization Test
• Ag-Ab reaction in which the harmful effects of a bacterial exotoxin or a virus are blocked by specific antibodies (antitoxins).
Complement Fixation Test (CFT)
• IgM and IgG can activate complement system forming immune complexes
• Hemolytic CFT is performed in 2- parts– Test system: Ag + Serum (Ab?) +
guinea pig serum which provide the complement
– Indicator system: sensitized sheep RBC + anti-SRBC
Precipitation Reactions
- is the reaction between a soluble antigen and its specific antibodies-soluble antigens are smaller and in solution; complexing with antibodies make these bigger and they fall out of solution as a precipitate –visible to the eye.
• IgG is a much better precipitating Ab than IgM (the reverse is true of agglutination)
• 2 types:• Precipitation in liquid medium• Precipitation in gel medium
Measurement of Precipitation by Light
• Antigen-antibody complexes, when formed at a high rate, will precipitate out of a solution resulting in a turbid or cloudy appearance.
• Turbidimetry measures the turbidity or cloudiness of a solution by measuring amount of light directly passing through a solution.
• Nephelometry indirect measurement, measures amount of light scattered by the antigen-antibody complexes.
Turbidimetry
• Measures turbidity or cloudiness of a solution by measuring the amount of light PASSING THROUGH the solution.
• Soluble antigen and antibody join and once they join in sufficient amounts precipitate, results in cloudiness.
• The more cloudy the solution, the less light can pass through.
Nephelometry
• Measures SCATTERED light bouncing off antigen-antibody complexes.
Nephelometry
• Antibody reagent is combined with patient
sample. • If antigen is present in
the patient’s sample, Ag/Ab complexes will
form and precipitate out of solution.
Y
Y Y
Nephelometry
• When light is passed through the solution, the precipitates cause the light to scatter at various angles.
• The light that is scattered at a particular angle is measured. This corresponds to the level of antigen in the sample.
Light source
Detector
Passive Immunodiffusion
• Reactions in gels/liquids
• Migrate towards each other and where they meet in optimal proportions form a precipitate.
Four Methodologies
• Single diffusion, single dimension
• Single diffusion, double dimension
• Double diffusion, single dimension
• Double diffusion, double dimension
Immunodiffusion Tests
Single diffusion test: if only one reactant (usually Ag) is moving
Double diffusion test: if both Ag and Ab are moving through the gel medium
Single dimension: if there’s only one effective dimension for Ag or Ab migration, like up and down
Double dimension: if circular holes or wells are cut in a gel on a flat surface like petri dish,Ag or Ab diffuses from the wells radially
Ouidin Single Diffusion, Single Dimension
Oudin Precipitation
• Solution of antibody is carefully layered on top of a solution of antigen, such that there is no mixing between the two.
• With time at the interface where the two layers meet, antigen-antibody complexes form a visible precipitate.
Single Diffusion, Double Dimension
Radial Immunodiffusion (Mancini/Fahey) –
• In radial immunodiffusion Antigen (IgG antibody) is incorporated into the agar gel as it is poured.
• Different dilutions of the antibody are placed in holes punched into the agar.
• As the antibody diffuses into the gel it reacts with the antigen and when the equivalence point is reached a ring of precipitation is formed.
• The diameter of the ring is proportional to the concentration of antibody since the amount of antigen is constant.
Radial Immunodiffusion
Immunodiffusion TestRadial Immunodiffusion or Mancini
TestAb is fixed to the agar in a petri
dishCircular wells are cut in the gel
and are loaded with AgA ring of precipitate is formed as
the Ag diffuses radially towards its equilibrium concentration
Radial Immunodiffusion
• 1. Fahey Method– Also known as Kinetic Method or Incomplete Immunodiffusion– Diameter of precipitin ring measured at 24 hours of diffusion– Diameter proportional to log of antigen concentration
• 2. Mancini Method– Also known as End Point Method or Complete Immunodiffusion– Area of precipitin ring formed at 48 hours of diffusion measured– Area proportional to antigen concentration
91
93
Double Diffusion, Single Dimension
• -Two wells cut in agar plate (1 for antigen; one for antibody)
• -Antigen and antibody diffuse towards one another• -At optimal concentrations, a precipitate line is formed
94
Double Diffusion, Double Dimension
• Ouchterlony Gel Diffusion– Holes punched in agar.– Known antibody or antigen added to center
well.– Known sample added to outer well.– Unknown sample added to outer well next to
unknown sample.– Wait for bands to form.
95
Ouchterlony Immunodiffusion
Ouchterlony - Identity
• The precipitation appears as a continuous line in the form of an angle between those two wells and the C well. There are no spurs at the angle and this type of reaction is termed a band of identity.
Ouchterlony – Partial IdentityIf a solution with antigens X and Y is placed in well 1, a solution with antigen X only is placed in well 2, and antiserum containing antibodies specific for both X and Y is placed in well 3, a reaction similar to that appearing in Fig. 2 will occur. Notice that there is a spur reaction towards the XY well. This indicates that the two antigenic materials in wells 1 and 2 are related, but that the material in well 1 possesses an antigenic specificity not possessed by the material in well 2. Such a reaction with spur formation indicates partial identity
Ouchterlony – Non-Identity
• If the material in wells 1 and 2 do not possess common antigens and the antiserum in well 3 possesses specificities for both materials, the reaction will appear as two crossed lines as in Fig. 3
100
Immunodiffusion Test
• Disadvantages of ordinary immunodiffusion tests
• incubation of several hours or even days are needed to ensure equilibrium of the system has occurred
• possibility that 2 or more precipitation bands may form in the same plate
Electrophoretic Techniques
Electrophoretic Techniques
• Immunodiffusion can be combined with electrical current to speed things up.
Rocket Immunoelectrophoresis
• Antigen is electrophoresed into gel containing antibody. The distance from the starting well to the front of the rocket shaped arc is related to antigen concentration.
Rocket Electrophoresis
Immunoelectrophoresis
Immunoelectrophoresis
• Two-dimensional immunoelectrophoresis. Antigens are separated on the basis of electrophoretic mobility.
• The second separation is run at right angles to the first which drives the antigens into the antiserum-containing gel to form precipitin peaks; the area under the peak is related to the concentration of antigen.
Immunoelectrophoresis
Immunofixation Electrophoresis
• Immunofixation Electrophoresis (IFE) combines zone electrophoresis with immunoprecipitation.
• This technique may be used to identify and characterise serum proteins.
• In IFE, proteins of sample are first separated by electrophoresis on a support (agarose) according to their charge and after that the medium is overlaid with monospesific antiserá reactive with specific protein - antigen.
• If the antigen is present a characteristic immunoprecipitin band will be formed.
Immunofixation Electrophoresis
Western Blot
• 1) Proteins are separated by gel electrophoresis.
• 2) The proteins are transfered to a sheet of special blotting paper called nitrocellulose, though other types of paper, or membranes, can be used. The proteins retain the same pattern of separation they had on the gel.
111
Western Blot
• 3) An antibody is then added to the solution which is able to bind to its specific protein. The antibody has an enzyme (e.g. alkaline phosphatase or horseradish peroxidase) or dye attached to it which cannot be seen at this time.
• 4) The location of the antibody is revealed by incubating it with a colorless substrate that the attached enzyme converts to a colored product that can be seen and photographed.
112
113
Immuno-chromatography: Principle
• Dye-labelled antibody, specific for target antigen, is present on the lower end of nitrocellulose strip or in a plastic well provided with the strip.
• Antibody, also specific for the target antigen, is bound to the strip in a thin (test) line
• Either antibody specific for the labelled antibody, or antigen, is bound at the control line
04/08/23 Dr.T.V.Rao MD 114
Lysing agendLabled AB.
Test band(bound AB)
Control band(bound AB)
Nitrocellulose strip
BoundAB
Free labled AB
Immuno-chromatography: Principle
• If antigen is present, some labelled antibody will be trapped on the test line
• Excess-labelled antibody is trapped on the control line
04/08/23 Dr.T.V.Rao MD 115
Captured Ag-labelled Ab-complex
Captured labelled Ab
Labelled AB-AG-complex
Captured by bound AB of
test band
Labelled AB-AG-complex
Captured by bound AB ofcontrol band
Immuno-chromatography:Immuno-chromatography: Performance, applications Performance, applications
• Advantages– Commercially available– Single use, rapid test– Easy to perform– Can detect antigen or antibody– Can be used in the field
• Limitations– Cost– Concern validated data
• Time taken - 1 hour04/08/23 Dr.T.V.Rao MD 116