IMI Sensors Toll Free in USA 800-959-4464 716-684-0003 www.imi-sensors.com
Vibration MonitoringInstrumentation
For Condition Monitoring and Predictive Maintenance of Industrial Machinery
Sensors, Switches, Transmitters & Accessories
Multi-Axis Industrial ICP® Accelerometers� Measure acceleration simultaneously
in up to three axes� Through-bolt mounting for
simplified alignment� Simultaneous radial and axial
bearing vibration measurements� Interface directly with vibration
data collectors and FFT analyzers
Ceramic, Low CostModel 601A01� 100 mV/g� 10.2 mV/(m/s2)� 0.3 to 10k Hz� 16 to 600k cpm� 7/8” hex x 1.94” (49.3 mm) H� 2.8 oz (80 gm)
Triaxial, Low CostModel 604B31� 100 mV/g (all axes)� 10.2 mV/(m/s2)� 0.5 to 5000 Hz (all axes)� 30 to 300k cpm� 1.38” Dia x 1” H
(35.1 x 25.4 mm)� 4.4 oz (124 gm)
Low-Profile, Low CostModel 602D01� 100 mV/g� 10.2 mV/(m/s2)� 0.5 to 8000 Hz� 30 to 480k cpm� 1.65” L x 0.74” W x 0.85” H
(41.9 x 18.8 x 21.6 mm)� 2.75 oz (78 gm)
Quartz, Low CostModel 627A01� 100 mV/g� 10 mV/(m/s2)� 0.3 to 10k Hz� 20 to 600k cpm
Small Size, Low CostModel 603C01� 100 mV/g� 10 mV/(m/s2)� 0.4 to 10k Hz� 26 to 600k cpm
Small Size, Low CostModel 608A11� 100 mV/g� 10.2 mV/(m/s2)� 0.4 to 10k Hz� 26 to 600k cpm� 9/16” hex x 2.5” (63.5 mm) H� 1.8 oz (51 gm)
Swiveler®
Model 607A11� 100 mV/g� 10.2 mV/(m/s2)� 0.5 to 10k Hz� 30 to 600k cpm� 9/16” hex x
0.97” (24.6 mm) H� 1.1 oz (31 gm)
Swiveler®
Model 607A01� 100 mV/g� 10.2 mV/(m/s2)� 0.5 to 10k Hz� 30 to 600k cpm� 7/8” hex x 1.23”
(31.2 mm) H� 3.7 oz (105 gm)
Spindler®
Model 607A61� 100 mV/g� 10.2 mV/(m/s2)� 0.5 to 10k Hz� 30 to 600k cpm� 9/16” hex x
1.0” (25.4 mm) H� 1.1 oz (31 gm)
Ceramic, General PurposeModel 625B01� 100 mV/g� 10.2 mV/(m/s2)� 0.2 to 10.5k Hz� 12 to 630k cpm� 1.38” Dia x 1.13” H (35.1 x 28.7 mm)� 5.1 oz (145 gm)
Ceramic, High SensitivityModel 626B02� 500 mV/g� 51 mV/(m/s2)� 0.2 to 6000 Hz� 12 to 360k cpm� 1-3/16” hex x 2.19” (55.6 mm) H� 7.0 oz (199 gm)
Biaxial, Low CostModel 605B61� 100 mV/g (all axes)� 10.2 mV/(m/s2)� 0.5 to 5000 Hz� 30 to 600k cpm� 1.38” Dia x 1” H
(35.1 x 25.4 mm)� 4.0 oz (113.3 gm)
Quartz, General PurposeModel 624A01• 100 mV/g• 10 mV/(m/s2)• 0.8 to 10k Hz• 48 to 600k cpm
Ceramic, General PurposeModel 622A01� 100 mV/g� 10.2 mV/(m/s2)� 0.2 to 10k Hz� 12 to 600k cpm� 7/8” hex x 2.06” (52.3 mm) H
3.3 oz (94 gm)
Quartz, General PurposeModel 628F01• 100 mV/g• 10 mV/(m/s2)• 0.3 to 12k Hz• 20 to 720k cpm
Precision Industrial ICP® Accelerometers� Ideal for roving use with route-based data collectors� Utilize for effective machinery analysis &
fault diagnostics� Velocity output, temperature output,
high temperature (+325 °F/ +163 °C), &hazardous area approved version available
� NIST traceable calibration through fullfrequency range
Swivel-Mount ICP® Accelerometers� Easy-to-install, patented, swivel mount design
(US Patent No. 6,435,902)� Cable rotates to any desired orientation� Smaller & less costly than ring-style sensors� Electrically protected from saturation problems� Excellent for use on high-speed rotating machinery & spindles� Available with temperature output� Hazardous area approved versions available
TriaxialModel 629A61� 100 mV/g (all axes)� 10.2 mV/(m/s2)� 0.8 to 8000 Hz (all axes)� 48 to 480k cpm� 1.5” L x 1.5” W x 0.82” H
(38.1 x 38.1 x 20.8 mm)� 4.9 oz (139 gm)
Low-Cost Industrial ICP® Accelerometers� Ideal for permanent installations & use with continuous, on-line monitoring systems� Promote safety when installed in hazardous or inaccessible locations� Connect through switch or junction box for route-based data collection schemes� NIST traceable, single-point calibration at 100 Hz� Hazardous area approved versions available
Industrial Vibration Monitoring Instrumentation
Every IMI Sensor Features:� Durable, stainless steel construction� Welded, hermetic sealing to withstand dirty, oily,
industrial, and submerged environments� Electrical protection from RFI, EMI, ESD, and mis-wiring� Total Customer Satisfaction Guarantee
4-20 mA Vibration SensorsSeries 640B� 2-wire, loop powered� Top or side exit connector� Hazardous area approved models available
(top exit only) RFI/EMI protected� Swivel mounting (patented) available� High temperature and temperature
output versions available
(+325 °F/+163 °C) ICP® AccelerometerModel HT622A01� 100 mV/g� 10.2 mV/(m/s2)� 0.2 to 8000 Hz� 12 to 480k cpm� -65 to +325 °F (-54 to +163 °C)� 7/8” hex x 2.0“ (50.8 mm) H� 3.3 oz (93 gm)
Armored Teflon CableModel 045M06� 10 ft (3 m length)� 2-pin, military-style
connectors
In-Line Charge ConvertersSeries 422E� In-line charge converters� Operate with ICP® sensor signal conditioners� Choice of many charge conversion values� Single ended & differential styles
Indicator/AlarmSeries 683A� Provides loop power for two-wire
4-20 mA sensors� Optional version provides ICP® sensor excitation� Four-digit, high visibility LED display� Offers up to four, user-programmable set
points with relay outputs� Time delay feature eliminates false alarms
due to momentary upsets� Optional 4-20 mA retransmission
Smart Vibration SwitchSeries 686B01 (US Patent Pending)� Universal, AC or DC-powered� Hermetically sealed� Built-in accelerometer� Microprocessor controlled� Two-wire simplicity� USB programmable threshold,
time delay & relay
Vibration TransmitterModel 682A03� Accepts ICP® accelerometer input� 4-20 mA output for rms acceleration,
peak velocity, or peak-to-peakdisplacement with filtering options
� Analog vibration output signal for faultdiagnostics
� Additional 4-20 mA output fortemperature available
Universal TransmitterModel 682A06� Provides loop power for two-wire,
4-20 mA sensors & transmitters� Accepts mA, VDC, RTD, TC, linear
resistance & potentiometer inputs� Delivers current & voltage output signals� Offers two set points with Form A relay
outputs (2 amp AC, 1 amp DC)� Fully programmable via detachable push
button display (Model 070A80)
Reciprocating Machinery ProtectorModel 649A01 (US Patent No. 7,171,313)� Detects faults & mechanical looseness
in reciprocating compressors� Improves on existing impact
monitoring technology� Provides continuous trending, with alarm
& alert levels for early warning� USB programmable set points & alarm
levels optimize performance� Hermetically sealed, loop-powered design
Electronic Vibration SwitchModel 685B� Built-in or remote accelerometer� Dual relays with time delay� Analog output signal for diagnostics� 4-20 mA overall vibration output� Calibration signal insertion for accurate set-up� AC or DC-powered (factory set)
Bearing Fault DetectorModel 682A05 (US Patent No. 6,889,553)� Accepts ICP® accelerometer input� Detects impacting faults due to
bearing & gear problems� Provides dual 4-20 mA signals
for peaks & overall vibration� Provides analog vibration output
signal for fault diagnostics
4-20 mA Industrial Vibration Sensors, Transmitters, Switches & Alarms� Adapts analog vibration signals to process monitoring instruments� Facilitates low-cost, continuous vibration monitoring� Connects to PLC, alarm & SCADA systems� Two-wire, loop-powered� Outputs proportional to peak velocity, rms velocity, or rms acceleration
� Optional analog vibration output signal for diagnostics� Optional temperature output signal� Optional raw vibration output signal� High temperature models available to +257 °F (+125 °C)
High-Temperature, Charge Output Accelerometer Kits� Kits include charge output accelerometer, charge converter, and high temperature cable� Survive elevated surface or ambient temperatures� Ideal for monitoring paper machines, steam handling systems, gas turbines, engines,
& in steel mills� Operate up to +900 °F (+482 °C)
Vibration Transmitters & Bearing Fault Detectors� Interface vibration signals with PLC, alarm & SCADA systems� Monitor bearing condition, gearbox health, imbalance and misalignment
NEW
IMI Sensors
Kit Model Sensitivity Cable Type600A06 10 mV/g (1 mV/(m/s2) Teflon®
600A08 10 mV/g (1 mV/(m/s2) Armored Teflon®
600A02 100 mV/g (10 mV/(m/s2) Teflon®
600A03 100 mV/g (10 mV/(m/s2) Armored Teflon®
600A07 1000 mV/g (10 mV/(m/s2) Teflon®
600A09 1000 mV/g (10 mV/(m/s2) Armored Teflon®
(+900 °F/+482 °C) Accelerometer KitModel 600A13Includes sensor, hardline cable& differential charge converter� 100 mV/g� 10.2 mV/(m/s2)� 2 to 8500 Hz� 120 to 510k cpm� -65 to +900 °F (-54 to +482 °C)
� Detect faults in bearings and gears due to wear, loss of lubrication,contamination, impacting and cavitation
Model 691B42 Rotary Switch Box� For use with data collectors that supply
ICP® sensor power� 12 input channels via terminal strip� BNC output connectors for switched
vibration and temperature signals� Versions to accommodate up to 48 channels� NEMA-4X (IP66) enclosure
Model 691A51 Switch Box� For use with data collectors that supply
ICP® sensor power� 1 to 4 input channels via terminal strip� 1 to 4 output channels via BNC� NEMA - 4x (IP66) Enclosure
Model 691A50/12 BNC Termination Box� For use with data collectors that supply
ICP® sensor power� 12 input channels via terminal strip� 12 output channels via BNC’s� NEMA-4X (IP66) enclosure
Custom Cable Assemblies� Styles for virtually any
installation requirement� Versions to interface with
most data collectors� Shielded for noise immunity
Model 687A01 Portable Vibration Meter� Measures rms vibration levels� 3-1/2 digit LCD display� Headphones offer audible monitoring� Supplied with Model 603C01
industrial ICP® accelerometer,coiled cable & magnet
� Simplify data collection by routing sensor cables to one central location� Promote data collection safety by keeping workers out of hazardous areas� Access more data points in less time� Versions from 1 to 48 channels
Magnetic Mounting Bases & Adhesive Mounting Pads� Magnetic temporary installations during
route data collection� Mounting pads for permanent installation� Styles for flat or curved surface mounting� Versions to accommodate virtually
any size sensor
New Model 699A02Portable 1g Handheld Shaker Verifies SensorPerformance & Calibration at the Machine� Calibrates permanently mounted accelerometers
at the machine� Verifies system performance� Confirms operation of cables, switching devices
and monitoring systems� Meets NIST traceability requirements� Outputs 1g pk or rms; operates at 159.2 Hz� Accepts sensors up to 250 gm (8.8 oz)� Can perform up to 1,600 operating cycles in
field without loss of battery power
Cable Assemblies for Industrial Accelerometers� General purpose polyurethane or high
temperature Teflon®
� Rugged military-style connectors in metalor plastic
� Made-to-order lengths� Overnight delivery
Switch Boxes, Enclosures and Intrinsic Safety Barriers
Cables, Magnets, Mounting Hardware, Accessories
Intrinsic Safety Barriers (Zener Barriers)� Utilize Zener diodes to limit amount of electrical
energy at sensor� Designed for use with ICP® sensors or loop
powered 4-20 mA sensors� Eliminate the risk of an electrical arc, or spark, at
the hazardous location� Up to 24 modules per enclosure
3425 Walden Avenue, Depew, NY 14043-2495 USAToll Free in USA 800-959-4464
24-hour SensorLineSM 716-684-0003Fax 716-684-3823 E-mail [email protected]
Web Site www.imi-sensors.comISO 9001:2000 CERTIFIED � A2LA ACCREDITED to ISO 17025
© 2008 PCB Group, Inc. In the interest of constant product improvement, specifications are subject to change withoutnotice. PCB, ICP, Modally Tuned, Spindler, Swiveler and TORKDISC are registered trademarks of PCB Group. SoundTrackLXT, Spark and Blaze are registered trademarks of PCB Piezotronics. SensorLine is a service mark of PCB Group. All othertrademarks are properties of their respective owners.
IMI-SFB-0608 Printed in U.S.A.
The IMI Sensors Division of PCB® Piezotronics, Inc. specializes in thedevelopment, application, and support of industrial vibration sensors,transmitters, meters, and accessories for machinery condition monitoring andpredictive maintenance requirements. This product focus, coupled with thestrengths and resources of PCB®, permits the IMI Sensors division to offerexceptional customer service, 24-hour technical assistance, and a TotalCustomer Satisfaction guarantee.
Visit www.pcb.com to locateyour nearest sales office
Industrial Vibration Monitoring Instrumentation
IndustryExclusive!